3.2 Charpit’s Method and the Cauchy Problem
Nonlinear first-order equations $F(x,y,z,p,q)=0$: complete, general and singular integrals, compatible systems, Charpit's method and the standard forms, the Cauchy problem for quasi-linear equations with the transversality condition, characteristic strips, and Jacobi's method.
Lagrange's method works because, for a quasi-linear equation, the direction $(P,Q,R)$ in which an integral surface must extend is known before the surface is: it depends only on the point $(x,y,z)$. For a genuinely nonlinear equation such as $p^2+q^2=1$ this is no longer true. At a given point many tangent planes are allowed (here, every plane making an angle of $45^\circ$ with the horizontal), and which one the solution uses decides in which direction it spreads. The remedy, found by Lagrange and turned into a practical method by Paul Charpit in a memoir of 1784 (preserved because Lacroix published it in his treatise), is to carry the slopes $p,q$ along as unknowns: the characteristics of a nonlinear equation are curves in the five-dimensional space of $(x,y,z,p,q)$ — characteristic strips, little ribbons of tangent plane moving along a curve.
This section develops the three kinds of solution of a nonlinear equation (complete, general, singular), Charpit's method for finding a complete integral, the four standard forms that CSIR NET uses most, and the Cauchy problem: when does a curve in space lie on exactly one integral surface? The answer — the transversality condition — explains every "none, one or infinitely many" question of this chapter, and the breaking of waves in Burgers' equation shows that even for smooth data the solution may exist only locally. Typical exam questions ask for a complete or singular integral, the solution of a Clairaut-type equation, whether two equations are compatible, the solution of a Cauchy problem by characteristics, and the first time at which characteristics cross. Notation: $z=z(x,y)$, $p=z_x$, $q=z_y$; subscripts on $F$ denote partial derivatives.
Complete, General and Singular Integrals
In Example 2 of §3.1 the two-parameter family of unit spheres $(x-a)^2+(y-b)^2+z^2=1$ produced the equation $z^2(1+p^2+q^2)=1$. Reversing the process, a two-parameter family of solutions is the natural "general solution" of a nonlinear first-order equation, and other solutions arise from it by taking envelopes, exactly as singular solutions of ODEs arise from envelopes of one-parameter families (§1.2).
Let $F(x,y,z,p,q)=0$ be a first-order PDE.
- A complete integral is a two-parameter family of solutions $z=\phi(x,y,a,b)$, with $\phi$ of class $C^2$, such that the matrix $$\begin{pmatrix}\phi_a&\phi_{xa}&\phi_{ya}\\ \phi_b&\phi_{xb}&\phi_{yb}\end{pmatrix}$$ has rank $2$ — the two parameters are essential (they cannot be merged into one).
- A general integral is obtained by restricting to a one-parameter subfamily $b=h(a)$, $h$ arbitrary, and forming its envelope: eliminate $a$ from $z=\phi(x,y,a,h(a))$ and $\phi_a+\phi_b\,h'(a)=0$.
- A singular integral is the envelope of the whole two-parameter family: eliminate $a,b$ from $z=\phi$, $\phi_a=0$, $\phi_b=0$ — when this produces a solution.
- A particular integral is any solution obtained by giving $a,b$ (or $h$) definite values.
Proof. By the chain rule and $\psi_a(x,y,\alpha(x,y))=0$, $$Z_x=\psi_x+\psi_a\,\alpha_x=\psi_x\big(x,y,\alpha(x,y)\big),$$ $$Z_y=\psi_y\big(x,y,\alpha(x,y)\big).$$ So at the point $(x,y)$ the envelope has the same value and the same first derivatives as the member of the family with parameter $a=\alpha(x,y)$: the two surfaces touch there. That member is a solution, so $F\big(x,y,\psi,\psi_x,\psi_y\big)=0$ with parameter $\alpha(x,y)$, which is exactly $F(x,y,Z,Z_x,Z_y)=0$. The two-parameter case is identical, with $\phi_a=\phi_b=0$ killing both extra terms. ∎
A solution of a PDE is determined, at each point, by first-order data $(x,y,z,p,q)$ only; a surface that touches a solution at every point therefore inherits the equation. This is the whole idea behind general and singular integrals.
Proof. For all $(x,y,a,b)$ we have $F\big(x,y,\phi,\phi_x,\phi_y\big)=0$. Differentiate with respect to $a$ and to $b$: $$F_z\phi_a+F_p\phi_{xa}+F_q\phi_{ya}=0,$$ $$F_z\phi_b+F_p\phi_{xb}+F_q\phi_{yb}=0 .$$ On the singular integral $\phi_a=\phi_b=0$, so $F_p\phi_{xa}+F_q\phi_{ya}=0$ and $F_p\phi_{xb}+F_q\phi_{yb}=0$. Since the first column of the rank-2 matrix of Definition 3.4 vanishes there, its remaining $2\times2$ block $\begin{pmatrix}\phi_{xa}&\phi_{ya}\\ \phi_{xb}&\phi_{yb}\end{pmatrix}$ is invertible, and the homogeneous system forces $F_p=F_q=0$, evaluated at the first-order data of the member $(\alpha,\beta)$ — which are the data of $Z$ (proof of Theorem 3.8). ∎
Compatible Systems and Charpit's Method
Charpit's idea: to solve $F=0$, look for a second equation $G(x,y,z,p,q)=a$ such that the two together can be solved for $p$ and $q$, $p=\varphi(x,y,z,a)$, $q=\psi(x,y,z,a)$, and such that the Pfaffian equation $dz=\varphi\,dx+\psi\,dy$ can be integrated. Its solutions contain a second constant $b$, giving a complete integral. Everything rests on knowing when $dz=\varphi\,dx+\psi\,dy$ is integrable.
Proof. Necessity. If such a surface passes through $(x_0,y_0,z_0)$, then $z_x=\varphi(x,y,z)$ is $C^1$ along it and $z_{xy}=\varphi_y+\varphi_z z_y=\varphi_y+\varphi_z\psi$; similarly $z_{yx}=\psi_x+\psi_z\varphi$. Equality of mixed partials gives the condition at $(x_0,y_0,z_0)$.
Sufficiency (sketch with the key step). Given $(x_0,y_0,z_0)$, first solve the ODE $\zeta'(x)=\varphi(x,y_0,\zeta)$, $\zeta(x_0)=z_0$, and then, for each fixed $x$, solve $\tfrac{\partial z}{\partial y}=\psi(x,y,z)$ with $z(x,y_0)=\zeta(x)$. By differentiable dependence on initial values, $z(x,y)$ is $C^1$ and $z_y=\psi$ by construction. Put $w=z_x-\varphi(x,y,z)$; then $w(x,y_0)=0$, and using $z_{xy}=z_{yx}$ and the hypothesis, $$w_y=\big(\psi(x,y,z)\big)_x-\varphi_y-\varphi_z z_y$$ $$=\psi_x+\psi_z(w+\varphi)-\varphi_y-\varphi_z\psi=\psi_z\,w .$$ For fixed $x$ this is a linear ODE in $y$ with zero initial value, so $w\equiv0$: $z_x=\varphi$ as well. ∎
Proof. Since $J\ne0$, the implicit function theorem solves $F=G=0$ locally as $p=\varphi(x,y,z)$, $q=\psi(x,y,z)$, and compatibility means exactly that $dz=\varphi\,dx+\psi\,dy$ is integrable. Differentiate the identities $F(x,y,z,\varphi,\psi)=0$, $G(x,y,z,\varphi,\psi)=0$ with respect to $x$ and solve by Cramer's rule; then do the same with $y$ and with $z$: $$\psi_x=\frac1J\frac{\partial(F,G)}{\partial(x,p)},\quad \psi_z=\frac1J\frac{\partial(F,G)}{\partial(z,p)},$$ $$\varphi_y=-\frac1J\frac{\partial(F,G)}{\partial(y,q)},\quad \varphi_z=-\frac1J\frac{\partial(F,G)}{\partial(z,q)} .$$ (For instance, the $x$-derivatives give $F_p\varphi_x+F_q\psi_x=-F_x$, $G_p\varphi_x+G_q\psi_x=-G_x$, and Cramer's rule yields $\psi_x=(F_xG_p-F_pG_x)/J$.) Substituting into the condition $\varphi_y+\psi\varphi_z=\psi_x+\varphi\psi_z$ of Theorem 3.10, with $\varphi=p$, $\psi=q$, and multiplying by $-J$, we get exactly $[F,G]=0$. ∎
Now fix $F$ and regard $[F,G]=0$ as an equation for the unknown $G$. Expanding the Jacobians and collecting terms, $$-[F,G]=F_p\,G_x+F_q\,G_y+(pF_p+qF_q)\,G_z$$ $$-(F_x+pF_z)\,G_p-(F_y+qF_z)\,G_q,$$ a linear homogeneous first-order PDE for $G$ in the five variables $x,y,z,p,q$. By the theorem on homogeneous linear equations of §3.1 (which holds verbatim in five variables), its solutions are exactly the first integrals of the associated characteristic system.
Proof. Let $X$ be the vector field $\big(F_p,F_q,pF_p+qF_q,-(F_x+pF_z),-(F_y+qF_z)\big)$. The displayed formula says $[F,G]=-X\cdot\nabla G$. Taking $G=F$: $$X\cdot\nabla F=F_pF_x+F_qF_y+(pF_p+qF_q)F_z$$ $$-(F_x+pF_z)F_p-(F_y+qF_z)F_q=0,$$ so $F$ is a first integral. If $G$ is a first integral, $X\cdot\nabla G=0$, so $[F,G-a]=[F,G]=0$ everywhere; by Theorem 3.11, $F=0$ and $G=a$ are compatible, so $dz=\varphi\,dx+\psi\,dy$ is integrable (Theorem 3.10) and its integral surfaces, which contain one more constant $b$, satisfy $F=0$ because $(z_x,z_y)=(\varphi,\psi)$ solves $F=0$. ∎
- Write $F=0$ and compute $F_x,F_y,F_z,F_p,F_q$.
- Write Charpit's equations and look for the simplest integrable combination that contains $p$ or $q$ — often one of $\frac{dp}{\cdots}$, $\frac{dq}{\cdots}$ alone (if $F_x+pF_z=0$, then $p=a$).
- Check $\partial(F,G)/\partial(p,q)\ne0$ (an integral free of $p$ and $q$, such as one from $\frac{dx}{F_p}=\frac{dy}{F_q}$ alone, is useless).
- Solve $F=0$, $G=a$ for $p,q$; substitute into $dz=p\,dx+q\,dy$ and integrate (look for exact combinations such as $d(z-\cdots)$).
- Check the complete integral in the PDE. Then find the singular integral (Theorem 3.9, then verify) and, if asked, a general integral.
Jacobi's method (brief)
Jacobi's method is Charpit's idea for an equation in which the unknown does not appear: $F(x_1,x_2,x_3,p_1,p_2,p_3)=0$ with $p_i=\partial u/\partial x_i$. (An equation $F(x,y,z,p,q)=0$ can be brought to this form by looking for the solution implicitly as $u(x,y,z)=0$, with $p=-u_x/u_z$, $q=-u_y/u_z$.) With the bracket $(F,G)=\sum_i\big(F_{x_i}G_{p_i}-F_{p_i}G_{x_i}\big)$, one looks for two further equations $F_1=a_1$, $F_2=a_2$ with $(F,F_1)=(F,F_2)=(F_1,F_2)=0$, found from Jacobi's auxiliary equations $$\frac{dx_1}{F_{p_1}}=\frac{dx_2}{F_{p_2}}=\frac{dx_3}{F_{p_3}}$$ $$=\frac{dp_1}{-F_{x_1}}=\frac{dp_2}{-F_{x_2}}=\frac{dp_3}{-F_{x_3}} .$$ Then $du=p_1dx_1+p_2dx_2+p_3dx_3$ is integrable and gives a complete integral $u=\Phi(x_1,x_2,x_3,a_1,a_2)+a_3$.
Proof (sketch). Exactness means $\partial\varphi_i/\partial x_j=\partial\varphi_j/\partial x_i$. Differentiating the three identities $F(x,\varphi)=0$, $F_1(x,\varphi)=a_1$, $F_2(x,\varphi)=a_2$ and eliminating the derivatives of $\varphi$ by Cramer's rule (as in Theorem 3.11) shows that the symmetry of the matrix $(\partial\varphi_i/\partial x_j)$ is equivalent to the vanishing of the three brackets. ∎
Standard Forms
Four types of equation occur again and again; for each, Charpit's equations integrate at once and the answer can be written down.
- $f(p,q)=0$ (only $p,q$ occur): $z=ax+h(a)\,y+c$, where $b=h(a)$ solves $f(a,b)=0$.
- Clairaut form $z=px+qy+f(p,q)$: $z=ax+by+f(a,b)$; the singular integral, if any, is its envelope (eliminate $a,b$ from $x+f_a=0$, $y+f_b=0$).
- $f(z,p,q)=0$ ($x,y$ absent): put $q=ap$; then $p=\Pi(z,a)$ from $f(z,p,ap)=0$, and $\displaystyle\int\frac{dz}{\Pi(z,a)}=x+ay+b$. Equivalently, look for $z=Z(X)$ with $X=x+ay$: $f(Z,Z',aZ')=0$ is an ODE.
- Separable $f_1(x,p)=f_2(y,q)$: set both sides equal to $a$, solve $p=g_1(x,a)$, $q=g_2(y,a)$; then $z=\int g_1(x,a)\,dx+\int g_2(y,a)\,dy+b$.
Proof. In each case we exhibit a first integral of Charpit's equations (Theorem 3.12) and integrate. (1) $F_x=F_y=F_z=0$, so $dp=dq=0$: $p=a$, and $q=h(a)$ by $F=0$; then $dz=a\,dx+h(a)\,dy$. (2) $F=px+qy+f(p,q)-z$ has $F_x+pF_z=p-p=0$ and $F_y+qF_z=0$, so $p=a$, $q=b$ are both first integrals, and $F=0$ gives $z=ax+by+f(a,b)$ directly. (3) $F_x=F_y=0$, so $\frac{dp}{-pF_z}=\frac{dq}{-qF_z}$, i.e. $\frac{dp}{p}=\frac{dq}{q}$, $q=ap$; then $dz=p\,(dx+a\,dy)=\Pi(z,a)\,d(x+ay)$. (4) $F=f_1(x,p)-f_2(y,q)$: $\frac{dx}{F_p}=\frac{dp}{-F_x}$ reads $\partial_xf_1\,dx+\partial_pf_1\,dp=0$, so $f_1(x,p)=a$, and then $f_2(y,q)=a$. ∎
The Cauchy Problem
We now make precise the question raised by Example 7 of §3.1: which curves lie on exactly one integral surface?
Let $\Gamma:\ s\mapsto\big(x_0(s),y_0(s),z_0(s)\big)$, $s\in I$ (an open interval), be a $C^1$ curve whose projection $\Gamma_0:\ s\mapsto(x_0(s),y_0(s))$ is regular ($(x_0',y_0')\ne0$). The Cauchy problem for $Pp+Qq=R$ asks for a solution $z(x,y)$, defined near $\Gamma_0$, with $$z\big(x_0(s),y_0(s)\big)=z_0(s)\qquad(s\in I).$$ The transversality condition at $s$ is $$J(s)=x_0'(s)\,Q\big(\Gamma(s)\big)-y_0'(s)\,P\big(\Gamma(s)\big)\ne0,$$ i.e. the projected curve $\Gamma_0$ is not tangent to the projected characteristic direction $(P,Q)$ there. $\Gamma$ is called non-characteristic if $J\ne0$ on $I$.
Proof. Step 1 (characteristics from the data). For each $s$ let $t\mapsto\big(x(s,t),y(s,t),z(s,t)\big)$ solve $$x_t=P,\quad y_t=Q,\quad z_t=R,$$ $$\big(x,y,z\big)(s,0)=\big(x_0(s),y_0(s),z_0(s)\big).$$ By the existence theorem and the theorem on differentiable dependence on initial values (Chapter 1), these functions are defined and $C^1$ on a neighbourhood of $(s^*,0)$.
Step 2 (inverting the map). At $t=0$: $x_s=x_0'$, $y_s=y_0'$, $x_t=P$, $y_t=Q$, so $$\frac{\partial(x,y)}{\partial(s,t)}\Big|_{(s^*,0)}=x_0'Q-y_0'P=J(s^*)\ne0 .$$ By the inverse function theorem, $(s,t)\mapsto(x,y)$ maps a neighbourhood $U$ of $(s^*,0)$ $C^1$-diffeomorphically onto a neighbourhood $N$ of $(x_0(s^*),y_0(s^*))$. Let $(s,t)=(S(x,y),T(x,y))$ be the inverse, and define $Z(x,y)=z\big(S(x,y),T(x,y)\big)$, a $C^1$ function on $N$.
Step 3 (it is a solution). By construction $z(s,t)=Z\big(x(s,t),y(s,t)\big)$ on $U$. Differentiating in $t$: $z_t=Z_xx_t+Z_yy_t$, that is $R=P\,Z_x+Q\,Z_y$ at every point of the graph of $Z$. At $t=0$, $Z(x_0(s),y_0(s))=z_0(s)$: the data are satisfied.
Step 4 (uniqueness). If $\tilde Z$ is another solution with the same data near the point, then by the theorem of §3.1 that integral surfaces are woven from characteristics, the characteristic through $\Gamma(s)$ lies on the graph of $\tilde Z$ for small $|t|$ (uniformly for $s$ near $s^*$, by continuous dependence). Hence $\tilde Z(x(s,t),y(s,t))=z(s,t)=Z(x(s,t),y(s,t))$ for $(s,t)$ near $(s^*,0)$, and these points $(x,y)$ fill a neighbourhood of $(x_0(s^*),y_0(s^*))$. ∎
- If a $C^1$ solution of the Cauchy problem exists near $\Gamma_0$, then $\Gamma$ is a characteristic curve (its tangent is parallel to $(P,Q,R)$).
- If $\Gamma$ is a characteristic curve, the Cauchy problem has infinitely many solutions near each point of $\Gamma_0$.
Proof. (1) $J=0$ means $(x_0',y_0')=\lambda(s)\,(P,Q)$ for some scalar $\lambda(s)\ne0$. If $z$ solves the problem, differentiate $z(x_0(s),y_0(s))=z_0(s)$: $$z_0'=p\,x_0'+q\,y_0'=\lambda\,(pP+qQ)=\lambda R .$$ So $(x_0',y_0',z_0')=\lambda(P,Q,R)$: $\Gamma$ is tangent to the characteristic field, hence (by uniqueness for the characteristic ODE) a reparametrised characteristic. (2) Take a point $\Gamma(s^*)$ and a short curve $\tilde\Gamma$ through it whose projection is transversal to $(P,Q)$, carrying data $\tilde z_0$ with $\tilde z_0=z_0(s^*)$ at the common point but otherwise arbitrary. Theorem 3.15 gives a solution containing $\tilde\Gamma$; by the same theorem of §3.1 it contains the characteristic through $\Gamma(s^*)$, which is $\Gamma$ itself near that point. Different choices of $\tilde z_0$ give different solutions. ∎
- Parametrise the data: $x=x_0(s)$, $y=y_0(s)$, $z=z_0(s)$. Compute $J(s)=x_0'Q-y_0'P$ and note where it vanishes.
- Solve the characteristic ODEs $x_t=P$, $y_t=Q$, $z_t=R$ with these initial values: $x(s,t)$, $y(s,t)$, $z(s,t)$.
- Invert $(s,t)\mapsto(x,y)$ (often $t$ is one of the variables) and substitute into $z(s,t)$.
- Check the PDE and the data. Determine where the inversion is valid: the solution lives where $\partial(x,y)/\partial(s,t)\ne0$; where it vanishes, characteristics cross or touch, and the solution may break down.
Nonlinear equations: characteristic strips. For $F(x,y,z,p,q)=0$ the characteristics are the solutions of Charpit's equations written with a parameter $t$: $$x_t=F_p,\quad y_t=F_q,\quad z_t=pF_p+qF_q,$$ $$p_t=-F_x-pF_z,\quad q_t=-F_y-qF_z .$$ Each solution is a curve $(x,y,z)$ together with a tangent plane (slopes $p,q$) at each of its points — a characteristic strip. The same steps as in Theorem 3.15 give the following result.
The first two conditions determine $(p_0,q_0)$ only up to a finite choice, and each choice can give a different solution. For $p^2+q^2=1$ with $z=0$ on the $x$-axis, the strip condition gives $p_0=0$ and then $q_0=\pm1$: the two solutions $z=y$ and $z=-y$. The characteristics of $f(p,q)=0$ are straight lines ($p,q$ are constant along them, since $F_x=F_y=F_z=0$), which is why the rays in Interactive 1 are straight.
- A complete integral is not unique. $z=(x+a)(y+b)$ and $4az=(x+ay+b)^2$ are both complete integrals of $z=pq$ (Example 6).
- The discriminant surface need not be a solution. For $p^2+q^2+z-x=0$, $F_p=F_q=0$ gives $p=q=0$ and then $z=x$; but $z=x$ has $p=1$, and $1+0+x-x=1\ne0$. Always check.
- Not every equation has a singular integral. If $F$ involves only $p,q$ and $(F_p,F_q)\ne0$ whenever $F=0$ (e.g. $p+q=pq$, $p^2+q^2=1$), there is none.
- A singular integral is not a particular integral. $z=xy$ is not of the form $ax+by-ab$ for any constants $a,b$, though it solves $z=px+qy-pq$.
- A general integral needs the envelope. Putting $b=h(a)$ into a complete integral gives only a one-parameter family of particular integrals; the general integral is the envelope of that family.
- Charpit's integral must contain $p$ or $q$. An integral of $\frac{dx}{F_p}=\frac{dy}{F_q}$ that involves only $x,y,z$ gives $\partial(F,G)/\partial(p,q)=0$ and cannot be solved for $p,q$ together with $F=0$.
- Compatibility is tested on $F=G=0$, not identically. For $p=z$, $q=z$ the bracket is $p-q$, which vanishes only on the common zero set; the system is compatible ($z=ce^{x+y}$).
- Transversality is a local condition. Burgers' equation $z_y+zz_x=0$ with smooth data $z(x,0)=-x$ satisfies $J\equiv1$, yet the solution $-x/(1-y)$ breaks at $y=1$. Theorem 3.15 is about a neighbourhood of the data curve only.
- $J=0$ at a single point is not harmless. For $y\,p-x\,q=0$ with data on the line $x=1$, $J=-s$ vanishes at $(1,0)$; a solution near that point exists only if the data are even in $y$, and inside the unit circle nothing is determined.
- Nonlinear Cauchy problems may have several solutions even when transversal: $p^2+q^2=1$, $z=0$ on $y=0$ has $z=y$ and $z=-y$.
Exercises
- 1 Show that $z=ax+by+a^2+b^2$ is a complete integral of $z=px+qy+p^2+q^2$, and find the singular integral.
- 2 For the same equation, find the general integral corresponding to $b=a$.
- 3 Find the singular integral of $z=px+qy+2\sqrt{1+p^2+q^2}$ and describe it geometrically.
- 4 For $p^2+q^2+z-x=0$ eliminate $p,q$ from $F=F_p=F_q=0$ and show that the resulting surface is not a solution.
- 5 Decide whether the pairs are compatible, and if so find the common solutions: (a) $p=x+y$, $q=x-y$; (b) $p=y$, $q=-x$.
- 6 Show that $p=z$ and $q=z$ are compatible although $[F,G]$ is not identically $0$, and find the common solutions.
- 7 From the complete integral $z=(x+a)(y+b)$ of $z=pq$, find the general integral corresponding to $b=a$ and verify it.
- 1 $pq=1$.
- 2 $p^2-q+2=0$.
- 3 $z=px+qy+p^2q^2$; also the singular integral.
- 4 $z=px+qy+\log(pq)$; also the singular integral.
- 5 $z=p^2+q^2$.
- 6 $p^2=z\,q$.
- 7 $p-3x^2=q^2-y$.
- 8 $y\,p^2=x\,q$ in the quadrant $x,y\gt0$.
- 9 $z=px+q^2$ (use Charpit's equations).
- 1 Solve $z_x+2z_y=z$ with $z(x,0)=\sin x$.
- 2 Solve $x\,p+y\,q=2z$ with $z(x,1)=x$.
- 3 Solve $z_y+z\,z_x=0$ with $z(x,0)=2x+1$, and state where the solution is valid.
- 4 For $z_y+z\,z_x=0$ with $z(x,0)=e^{-x^2}$, find the first $y^*\gt0$ at which characteristics cross.
- 5 For $y\,p-x\,q=0$ with data $z(1,y)=g(y)$ on the line $x=1$, compute $J$, and show that a solution near $(1,0)$ exists only if $g$ is even near $0$.
- 6 Solve $z_x+z_y=z^2$ with $z(x,0)=x$. Where does the solution blow up?
- 7 Show that the Cauchy problem $x\,p+y\,q=z$, $z=1$ on $x^2+y^2=1$, is non-characteristic everywhere, and solve it.
- 8 Find all solutions of $p^2+q^2=1$ with $z(x,0)=x/2$.
- 1 Prove that an equation $f(p,q)=0$ with $\nabla f\ne0$ on the set $f=0$ has no singular integral.
- 2 Write Charpit's equations for $f(p,q)=0$ and show that the projected characteristics are straight lines along which $p$ and $q$ are constant.
- 3 Show that the singular integral of a Clairaut equation $z=px+qy+f(p,q)$, when it exists, is a surface whose tangent planes are exactly the planes of the complete integral.
- 4 Let $g\in C^1(\mathbb{R})$ be bounded with $g'\ge0$. Prove that $z_y+zz_x=0$, $z(x,0)=g(x)$, has a $C^1$ solution on $\mathbb{R}\times[0,\infty)$.
- 5 Let $g\in C^1(\mathbb{R})$ with $g'(s_0)\lt0$. Prove that $z_y+zz_x=0$, $z(x,0)=g(x)$, has no $C^1$ solution on $\mathbb{R}\times[0,Y)$ for $Y\gt-1/g'(s_0)$.
- 6 Use Jacobi's method to find a complete integral of $x_1p_1^2+x_2p_2^2=p_3$ ($x_1,x_2\gt0$).
E1. CSIR Part B GATE MA The singular integral of $z=px+qy+3pq$ is (A) $z=\tfrac{xy}{3}$; (B) $3z+xy=0$; (C) $z=3xy$; (D) there is no singular integral.
E2. CSIR Part B A complete integral of $p-q=x-y$ is (A) $z=\tfrac{x^2+y^2}{2}+a(x+y)+b$; (B) $z=\tfrac{x^2-y^2}{2}+a(x-y)+b$; (C) $z=xy+ax+b$; (D) $z=a(x+y)+b$.
E3. CSIR Part B For $z_y+z\,z_x=0$, $z(x,0)=-\dfrac{2x}{1+x^2}$, the smallest $y\gt0$ at which characteristics intersect is (A) $\tfrac14$; (B) $\tfrac12$; (C) $1$; (D) $2$.
E4. CSIR Part C For the equation $z=pq$, which of the following are true? (One or more options may be correct.) (A) $z=(x+a)(y+b)$ is a complete integral. (B) $z=0$ is a singular integral. (C) Every solution is of the form $(x+a)(y+b)$ for some constants $a,b$. (D) $z=\tfrac{(x+y)^2}{4}$ is a solution.
E5. CSIR Part C Consider $p^2+q^2=1$. Which of the following are true? (A) $z=x\cos\alpha+y\sin\alpha+c$ is a complete integral. (B) $z=\sqrt{x^2+y^2}$ is a solution on $\mathbb{R}^2\setminus\{(0,0)\}$. (C) The equation has a singular integral. (D) There is a $C^1$ solution on $\mathbb{R}^2$ that vanishes on the unit circle.
E6. CSIR Part C GATE MA Consider the Cauchy problem $z_y+z\,z_x=0$, $z(x,0)=x$. Which of the following are true? (A) $z=\dfrac{x}{1+y}$ for $y\gt-1$. (B) A $C^1$ solution exists on $\mathbb{R}\times[0,\infty)$. (C) $z$ is constant along each line $x=s(1+y)$. (D) The projected characteristics through distinct points of the $x$-axis meet at some point with $y\gt0$.
Suggested plan — 3 lectures × 60 min.
- Kinds of integrals. Recall the sphere family of §3.1 and turn it round: Definition 3.4, Theorem 3.8 (the "touching" argument is the whole proof), Theorem 3.9 and Example 1. Draw the rolling-ball cylinder on the board. Pitfall 2 as a warning. Then Theorem 3.14(1)–(2) and Example 5(a), (b).
- Charpit. Theorem 3.10 (necessity in two lines, the $w_y=\psi_zw$ trick for sufficiency), Theorem 3.11 and Example 2, then Charpit's equations as "the characteristic equations of $[F,G]=0$" and Example 3. Standard forms (3), (4) with Example 5(c) and Example 6 — let the class discover the second complete integral of $z=pq$. Jacobi in ten minutes with Example 4.
- The Cauchy problem. Definition 3.6, Theorem 3.15 with the picture of the $(s,t)$-grid being mapped to the plane; project Interactive 2 (circles case: rotate until $J$ has a zero on the segment; rays case: $J$ is constant along the segment!). Theorem 3.16, Example 7 and the teaser of the chapter introduction for breaking; finish with Interactive 1 and the remark on strips, then E4–E6 live.
Discussion questions. (1) Why is the envelope of solutions a solution, while the envelope of a family of non-solutions need not be anything? (2) In Example 6, two "complete" integrals look completely different. In what sense do they contain the same solutions? (3) Burgers' equation has a smooth solution near the initial line for any smooth data, yet it can break. Which hypothesis of Theorem 3.15 tells you "near"?
Misconceptions to watch for. Treating the discriminant eliminant as automatically a solution; putting $b=h(a)$ and forgetting the envelope; using an integral of Charpit's equations that contains neither $p$ nor $q$; checking compatibility identically instead of on $F=G=0$; believing that a transversal Cauchy problem has a global solution; assuming nonlinear Cauchy problems have unique solutions.
Suggested homework. I(1, 3, 4, 6), II(3, 5, 6, 8, 9), III(1, 3, 4, 6, 8), IV(2, 4, 5); Exam corner E1, E3, E5.
Research question. A grass fire starts along a line of burning brush and spreads at a fixed speed in every direction. When does it reach a given farmhouse, and where on the fire front do sharp corners appear?
Why it matters. Fire-spread simulators used in Australia, California and the Mediterranean, seismic travel-time tomography and the "fast marching" methods of computer vision all solve the eikonal equation $|\nabla T|=1/v$ for an arrival time $T(x,y)$. Its characteristics are the rays of geometrical optics, and the corners of the front are where rays cross — the caustics of Interactive 1.
What to do.
- With constant speed $v$ and the fire starting at time $0$ on a curve $\Gamma$, show that $T=d/v$, where $d$ is the distance to $\Gamma$, solves $T_x^2+T_y^2=1/v^2$ wherever it is differentiable, and that the level curves of $T$ are the wavefronts of Interactive 1.
- Take $\Gamma$ to be the parabola $y=x^2/2$ (burning inside, i.e. upwards) and $v=0.5\ \text{m/s}$, lengths in units of $100\ \text{m}$. Using Charpit's equations for $p^2+q^2=1$, show that the ray from $(s,s^2/2)$ is $x=s-\tfrac{s\,c}{\sqrt{1+s^2}}$, $y=\tfrac{s^2}2+\tfrac{c}{\sqrt{1+s^2}}$ at distance $c$.
- Find where rays first cross (the cusp of the wavefront) and the time at which the fire first develops a sharp corner. Compute the arrival time at a farmhouse at $(0,3)$.
- Explore numerically: replace $v$ by a speed depending on direction (wind). Which part of the theory survives?
Tools: Interactive 1 of this section, pen and paper, and a few lines of Python to draw rays.
Hand in: the ray formula, the crossing distance and time, the arrival time at the farmhouse, and one figure of rays and fronts.
Going further. Read about viscosity solutions (Crandall and Lions), the notion of solution that selects the physically correct non-smooth front after rays cross, and about anisotropic fire-spread models.
🧪 Self-check quiz
Q1. The singular integral of $z=px+qy-pq$ is
Q2. In Charpit's method for $F(x,y,z,p,q)=0$, the fraction paired with $dp$ is
Q3. A complete integral of $f(p,q)=0$ has the form
Q4. For the Cauchy problem $Pp+Qq=R$ with data on $(x_0(s),y_0(s),z_0(s))$, a unique local solution is guaranteed when
Q5. For $z_y+zz_x=0$ with $z(x,0)=-3x$, the solution exists for $0\le y\lt Y$ with the largest possible $Y$ equal to