Chapter 9 · Biotechnology and Its Applications

9.1 Biotechnology: Principles and Processes

How a gene is cut out of one organism, pasted into a carrier and copied by another: restriction enzymes and sticky ends, gel electrophoresis, cloning vectors such as pBR322, competent hosts, PCR, bioreactors and downstream processing.

Until the early 1980s, a person with diabetes injected insulin taken from the pancreas of slaughtered cattle and pigs. Animal insulin works, but it differs from human insulin by one to three amino acids, some patients reacted to it as to any foreign protein, and the supply depended on abattoirs. Today almost all the insulin in the world is human insulin made by bacteria and yeast. A microbe has never needed insulin — so how was it persuaded to make a human hormone, correctly, by the kilogram?

The answer is a set of tools and steps that together are called recombinant DNA technology: find the gene you want, cut it out with enzymes that cut DNA only at particular sequences, paste it into a small DNA "carrier" that a host cell will copy, push it into the host, pick out the cells that took it up, grow them in huge, sterile vessels, and purify the product. This section builds each tool and each step; Section 9.2 then uses them — for insulin, vaccines, gene therapy, Bt cotton and transgenic animals.

Biotechnology and the Logic of Recombinant DNA

People were using living organisms to make things long before anyone knew what a gene was: milk set into curd by bacteria, dough raised by yeast, grape juice turned into wine. These are biotechnology too, but the modern subject is defined by what we can now do to the genetic material itself.

📘 Definition 9.1 — Biotechnology

Biotechnology deals with techniques that use live organisms, or enzymes from organisms, to make products and processes useful to humans. The European Federation of Biotechnology (EFB) gives a definition that covers both the old and the new: biotechnology is the integration of natural science and organisms, cells, parts of them and molecular analogues for products and services.

In the narrow, modern sense the word covers processes that use genetically modified organisms to make a product on a large scale. Many other techniques — in vitro fertilisation leading to a "test-tube" baby, synthesising a gene and using it, making a DNA vaccine, correcting a defective gene — are also counted as biotechnology.

📘 Definition 9.2 — The two core techniques of modern biotechnology
  • Genetic engineering — techniques that alter the chemistry of the genetic material (DNA and RNA), introduce it into a host organism and so change the host's phenotype. Joining DNA from two different sources gives recombinant DNA (rDNA); the techniques include making rDNA, gene cloning and gene transfer.
  • Bioprocess engineering — keeping sterile (microbial-contamination-free) conditions in chemical engineering processes, so that only the desired microbe or eukaryotic cell grows, in large numbers, to make biotechnological products such as antibiotics, vaccines, enzymes and hormones.
📐 Key fact 9.1 — Why genetic engineering beats hybridisation, and its three basic steps

Hybridisation (crossing two plants or animals) mixes the whole genomes of the parents, so undesirable genes come along with the desirable ones. Genetic engineering moves only the gene that is wanted into the target organism.

A piece of DNA alone cannot multiply. A fragment pushed into a cell has no way of being copied; it must be joined to a molecule that carries an origin of replication (ori) — the sequence where replication starts — such as a plasmid or the host chromosome. Then it is copied along with that molecule.

Three basic steps in genetically modifying an organism: (1) identifying the DNA with the desirable genes; (2) introducing that DNA into the host; (3) maintaining the introduced DNA in the host and transferring it to the host's progeny.

The first recombinant DNA was made in 1972 by Stanley Cohen and Herbert Boyer. They cut a piece of DNA carrying an antibiotic-resistance gene out of a plasmid, joined it to a native plasmid of Salmonella typhimurium, and transferred the product into Escherichia coli. Inside E. coli, the host's own DNA polymerase replicated the new plasmid many times over: each copy of the antibiotic-resistance gene was a clone. The figure shows the same logic as six steps; every one of them is a subsection of this page.

✏️ Example 1 — Genetic engineering or not?
For each case decide whether it uses genetic engineering (recombinant DNA), and if it does, which of the three basic steps of Key fact 9.1 it illustrates. (a) A plant breeder crosses a high-yielding rice with a disease-resistant one and selects the best offspring over six generations. (b) A scientist finds that a soil bacterium carries a gene for an insect-killing protein and sequences it. (c) That gene is joined to a plasmid and delivered into cotton cells. (d) The cotton plants are grown and their seeds still produce the protein in the next generation. (e) A dairy uses Lactobacillus to set milk into curd.
(a) Not genetic engineering: hybridisation mixes the whole genomes of the parents, bringing undesirable genes with the desirable one, so many generations of selection are needed.
(b) Step 1 — identifying the DNA with the desirable gene.
(c) Step 2 — introducing the DNA into the host. It is joined to a plasmid because a free piece of DNA cannot replicate on its own; it needs an origin of replication.
(d) Step 3 — maintaining the DNA in the host and transferring it to the progeny.
(e) Biotechnology in the broad, traditional sense (a useful product from a living organism), but no genetic material has been changed: not genetic engineering.

Which of these is not one of the three basic steps in genetically modifying an organism?

Tools I — Restriction Enzymes, Ligase and Gel Electrophoresis

To paste a gene into a carrier you need scissors that cut DNA at exactly the same place every time, glue that joins the cut ends, and a way of seeing and picking out the piece you want. Bacteria supplied the scissors.

📘 Definition 9.3 — Restriction endonucleases ("molecular scissors")

In 1963 two enzymes were found in E. coli that restrict the growth of bacteriophages: one adds methyl groups to the bacterium's own DNA, and the other cuts DNA. The cutting enzyme is a restriction enzyme; it protects the bacterium by chopping up the DNA of an invading phage. The first restriction endonuclease whose action depended on a specific DNA sequence, Hind II, was isolated and characterised five years later; it always cut DNA at a particular sequence of six base pairs, its recognition sequence. More than 900 restriction enzymes have now been isolated from over 230 strains of bacteria, each recognising its own sequence.

Restriction enzymes belong to the larger class of nucleases. Exonucleases remove nucleotides one by one from the ends of a DNA molecule; endonucleases make cuts at specific positions within the DNA. A restriction endonuclease inspects the length of the DNA, binds at its recognition sequence and cuts each of the two strands of the double helix at a specific point in the sugar–phosphate backbone.

📐 Rule 9.2 — How restriction enzymes are named

Take EcoRI, from Escherichia coli strain RY13:

  • first letter (capital) — the genus: E for Escherichia;
  • next two letters — the species: co for coli;
  • the next letter — the strain: R for RY13;
  • the Roman numeral — the order in which enzymes were isolated from that strain: I = the first.

So HindIII comes from Haemophilus influenzae strain Rd (the third enzyme from it), BamHI from Bacillus amyloliquefaciens strain H, SalI from Streptomyces albus, PstI from Providencia stuartii, PvuI and PvuII from Proteus vulgaris, SmaI from Serratia marcescens. The genus and species letters are printed in italics in research papers; in NEET answers the plain form (EcoRI) is accepted.

📘 Definition 9.4 — Palindromes, sticky ends and DNA ligase

A palindromic nucleotide sequence in DNA is one that reads the same on the two strands when both are read in the same orientation (5′ → 3′). For EcoRI:

5′ — G A A T T C — 3′
3′ — C T T A A G — 5′

Read 5′ → 3′, the top strand says GAATTC and the bottom strand also says GAATTC. Each restriction enzyme recognises a specific palindromic sequence.

Restriction enzymes cut the strands a little away from the centre of the palindrome, but between the same two bases on the opposite strands. EcoRI cuts between G and A on each strand (G↓AATTC). The two cuts are staggered, so each cut end carries a short single-stranded overhang (here AATT). These are sticky ends: they form hydrogen bonds with their complementary overhangs. Enzymes that cut at the exact centre (e.g. SmaI, CCC↓GGG) leave blunt ends with no overhang.

DNA ligase seals the backbone between the joined ends. Because a given enzyme leaves the same sticky ends on every DNA it cuts, a gene and a vector cut with the same restriction enzyme have complementary ends that can be joined end-to-end by ligase — the key to making recombinant DNA.

✏️ Example 2 — Palindrome or not? Where are the sticky ends?
(a) Which of these 6 bp sequences (top strand, 5′ → 3′) are palindromic: GGATCC, GAATTG, AAGCTT, CTGCAG? (b) BamHI cuts G↓GATCC. Write the overhang left on each fragment. (c) A gene is cut out with BamHI and a plasmid is opened with EcoRI. Can DNA ligase join them through sticky ends? (d) Which enzyme name tells you the bacterium was Haemophilus influenzae?
Method Write the complementary strand and read it 5′ → 3′ (that is, right to left). If it spells the same sequence, the site is a palindrome. This is the same as "the reverse complement equals the sequence".
(a) GGATCC → complement CCTAGG, read backwards GGATCC ✓. GAATTG → complement CTTAAC, backwards CAATTC ✗. AAGCTT → TTCGAA, backwards AAGCTT ✓. CTGCAG → GACGTC, backwards CTGCAG ✓. Three are palindromes (the sites of BamHI, HindIII and PstI).
(b) Cutting between G and G on both strands leaves a four-base single-stranded overhang 5′-GATC-3′ on each fragment.
(c) No. BamHI ends (GATC) and EcoRI ends (AATT) are not complementary, so they cannot pair. Gene and vector must be cut with the same enzyme (or enzymes that leave matching ends).
(d) Hind (HindII, HindIII): H for Haemophilus, in for influenzae, d for strain Rd.

After cutting, a mixture of fragments of different lengths has to be sorted. DNA cannot be seen or weighed directly in a tube, but it can be made to run through a gel.

📘 Definition 9.5 — Agarose gel electrophoresis
  • DNA fragments are negatively charged (their phosphate groups), so in an electric field they move towards the anode (the positive electrode).
  • They are forced through a matrix; the commonest is agarose, a natural polymer extracted from seaweeds. The gel acts as a sieve, so fragments separate (resolve) according to their size: the smaller the fragment, the farther it moves.
  • Pure DNA is invisible in visible light. The fragments are seen only after staining with ethidium bromide and exposure to UV radiation: they appear as bright orange bands.
  • The band of the wanted fragment is cut out of the gel and the DNA extracted from the gel piece: this is elution. Purified fragments are then used to build recombinant DNA by joining them with cloning vectors.
📐 Rule 9.3 — Counting the fragments of a digest

If an enzyme (or a mixture of enzymes) cuts a DNA molecule at $c$ sites, the number of fragments $f$ is

$$\text{linear DNA: } f=c+1$$ $$\text{circular DNA (plasmid): } f=c\quad (c\ge 1)$$

One cut opens (linearises) a circle without making a second piece. The fragment sizes always add up to the size of the original molecule. Fragments of the same size run together, so the number of bands on the gel can be smaller than the number of fragments — but such a band is brighter, because it contains more DNA.

✏️ Example 3 — Mapping two restriction sites
A linear DNA of 8.0 kb is digested in three tubes. EcoRI alone gives fragments of 5.0 and 3.0 kb. BamHI alone gives 6.0 and 2.0 kb. EcoRI and BamHI together give 3.0, 3.0 and 2.0 kb. (a) How many bands does the double digest show on a gel? (b) Draw the map: where are the two sites? (c) In the double-digest lane, which band is nearest the well and which band is brightest?
Find (a), the number of bands in the double-digest lane, before you open the solution:
(a) Three fragments (two cuts in a linear molecule, $f=c+1=3$), but the two 3.0 kb fragments co-migrate: 2 bands.
(b) EcoRI cuts 3.0 kb from one end — call that end the left: EcoRI at 3.0 kb. BamHI cuts 2.0 kb from one end, either at 2.0 or at 6.0 kb. With BamHI at 2.0 the double digest would give 2.0, 1.0 and 5.0 kb ✗. With BamHI at 6.0 it gives 3.0 (0→3), 3.0 (3→6) and 2.0 (6→8) ✓. Map: EcoRI at 3.0 kb, BamHI at 6.0 kb from the left end (or the mirror image, 2.0 and 5.0 kb from the other end — the same map read backwards).
(c) The 3.0 kb band is nearer the well (larger fragments move less) and it is the brighter band, since it holds two fragments' worth of DNA (6.0 kb in total against 2.0 kb).
Check Each digest adds up to 8.0 kb: $5+3$, $6+2$, $3+3+2$ ✓.

In the cutter below, the linear 12 kb DNA has two EcoRI sites. Digest it with EcoRI alone. How many fragments are made, and how many bands appear on the gel?

Choose linear DNA, 12 kb and EcoRI: the readouts show cuts 2, fragments 3, bands 2 and sizes 6 + 3 + 3 = 12 kb. Two cuts in a linear molecule give $2+1=3$ fragments (Rule 9.3), but the sites at 3 kb and 9 kb make the two end pieces both 3 kb long, so they run as one brighter band below the 6 kb band.
Interactive 1 — Restriction-Map Cutter

Choose a DNA molecule and the enzymes to digest it with. The map shows every recognition site (E = EcoRI, B = BamHI, H = HindIII); the sites of the chosen enzymes are cut and the fragments coloured. Drag gel run (or press ▶ Play) to load the fragments into the gel and watch them separate beside a size ladder (lane M). Compare the number of cuts, fragments and bands.

100%
cuts—
fragments—
bands on the gel—
fragment sizes—

EcoRI recognises 5′-GAATTC-3′. Where does it cut each strand, and what kind of ends does it leave?

Tools II — Cloning Vectors and Competent Hosts

Once a gene has been cut out, it needs a vehicle: a DNA molecule that the host cell will copy and keep, and that lets us tell which cells took it up. Nature again supplied the raw material — plasmids, the small circular DNA molecules that many bacteria carry outside their chromosome, and bacteriophages, viruses of bacteria.

📘 Definition 9.6 — Cloning vector

A cloning vector is a DNA molecule (usually a plasmid or a bacteriophage) that can replicate inside a host cell independently of the host chromosome and carry a linked piece of foreign DNA with it. Bacteriophages, because of their high number per cell, have very high copy numbers of their genome in bacterial cells; some plasmids have only one or two copies per cell, others 15–100 or more. A foreign DNA linked to the vector is multiplied to the copy number of the vector.

Natural plasmids and phages are engineered before use, so that they can be linked to foreign DNA easily and so that recombinants can be picked out from non-recombinants.

📐 Key fact 9.4 — Features a cloning vector must have
  1. Origin of replication (ori) — the sequence from which replication starts. Any piece of DNA linked to it can replicate in the host. The ori also controls the copy number of the linked DNA: to recover many copies of the target DNA, clone it in a vector whose ori supports a high copy number.
  2. Selectable marker — a gene that helps to identify and eliminate non-transformants and selectively permit the growth of transformants. (Transformation is the procedure by which a piece of DNA is introduced into a host bacterium.) Genes for resistance to ampicillin, chloramphenicol, tetracycline or kanamycin are useful selectable markers for E. coli; normal E. coli cells resist none of these antibiotics.
  3. Cloning sites — recognition sites for commonly used restriction enzymes, preferably only one site for each enzyme. More than one site would cut the vector into several fragments and complicate gene cloning. The foreign DNA is ligated at a site inside one of the two antibiotic-resistance genes.
  4. Vectors for plants and animals — for cloning genes in eukaryotic cells (see below).
📘 Definition 9.7 — Insertional inactivation and blue–white selection

Suppose a foreign gene is ligated into the BamHI site of the tetracycline-resistance gene of pBR322. The inserted DNA interrupts the gene, so the recombinant plasmid loses tetracycline resistance but keeps ampicillin resistance. Transformants are first selected on an ampicillin plate (all cells carrying any pBR322 grow); colonies are then transferred to a tetracycline plate: the recombinants grow on ampicillin but not on tetracycline. Recognising recombinants by the loss of a gene function caused by the inserted DNA is called insertional inactivation.

Plating on two antibiotics is cumbersome, so a second method is widely used. The vector carries the gene for the enzyme β-galactosidase; inserting the foreign DNA into this gene inactivates it. Colonies are grown on a medium with a chromogenic substrate (one that gives a coloured product when acted on by the enzyme). Colonies with an intact β-galactosidase gene — no insert — turn the substrate blue; recombinant colonies stay colourless (white). This is blue–white selection.

✏️ Example 4 — Reading the selection plates
A gene is ligated into the PstI site of pBR322 and the ligation mixture is used to transform E. coli. Three kinds of cell result: (i) cells that took up no plasmid; (ii) cells that took up pBR322 that closed up again without the insert; (iii) cells with the recombinant plasmid. (a) On which plate(s) — ampicillin, tetracycline — does each kind grow? (b) Which plate should be used first, and how are the recombinants then recognised? (c) 240 colonies grow on the first plate; when they are copied to the second antibiotic, 180 grow. How many colonies are non-recombinant transformants, and how many recombinants?
Idea PstI lies inside the ampicillin-resistance gene, so an insert there breaks ampᴿ and leaves tetᴿ working.
(a) (i) no plasmid: grows on neither (normal E. coli resists neither antibiotic). (ii) pBR322 without insert: grows on both. (iii) recombinant: grows on tetracycline, not on ampicillin.
(b) First tetracycline — it kills every cell without a plasmid, leaving all transformants (ii and iii). Copying those colonies to ampicillin then picks out the recombinants: the colonies that fail to grow on ampicillin.
(c) All 240 colonies on tetracycline are transformants; the 180 that also grow on ampicillin carry the intact vector (non-recombinant). Recombinants $=240-180=60$.
Check Had the insert been at BamHI instead, every answer would swap the two antibiotics — the standard NEET version.
📘 Definition 9.8 — Vectors for cloning genes in plants and animals

Biologists learnt this from pathogens, which have long been transferring genes into plant and animal cells.

  • Agrobacterium tumefaciens, a pathogen of several dicot plants, delivers a piece of DNA called T-DNA into the plant cell. The T-DNA transforms normal cells into a tumour and directs the tumour cells to make chemicals that the pathogen needs. The tumour-inducing (Ti) plasmid of A. tumefaciens has been modified into a cloning vector that is no longer pathogenic but can still deliver genes of our interest into many plants. Agrobacterium is called a "natural genetic engineer" of plants.
  • Retroviruses in animals, including humans, can transform normal cells into cancerous cells. Disarmed retroviruses — made harmless — are used to deliver desirable genes into animal cells.
📘 Definition 9.9 — Competent host and ways of getting DNA in

DNA is a hydrophilic molecule, so it cannot pass through cell membranes. To force bacteria to take up a plasmid, the cells are first made competent:

  • Treat bacterial cells with a specific concentration of a divalent cation, such as calcium; this increases the efficiency with which DNA enters through pores in the cell wall. Incubate the cells with the recombinant DNA on ice, place them briefly at 42 °C (heat shock), then put them back on ice. The bacteria now take up the rDNA.

Other methods: micro-injection — rDNA is injected directly into the nucleus of an animal cell; biolistics (gene gun) — plant cells are bombarded with high-velocity micro-particles of gold or tungsten coated with DNA; and disarmed pathogen vectors — Agrobacterium or a retrovirus allowed to infect the cell transfers the recombinant DNA into the host.

A gene is inserted at the BamHI site of pBR322. How do E. coli colonies carrying the recombinant plasmid behave?

The Process — From Isolating DNA to a Purified Product

With the tools in hand, a recombinant DNA experiment runs as a fixed sequence of operations. Every NEET question on "processes" is about the order of these steps, the enzyme or condition used in each, or what happens to the product at the end.

📐 Key fact 9.5 — The steps of recombinant DNA technology
  1. Isolation of the genetic material (DNA).
  2. Fragmentation of the DNA by restriction endonucleases (cutting at specific locations).
  3. Isolation (separation) of the desired DNA fragment — by gel electrophoresis, or amplification of the gene of interest by PCR.
  4. Ligation of the DNA fragment into a vector.
  5. Transferring the recombinant DNA into the host.
  6. Culturing the host cells in a medium at a large scale.
  7. Extraction of the desired product (downstream processing).
📘 Definition 9.10 — Isolating pure DNA

DNA is enclosed within membranes and, in eukaryotes, wound round proteins such as histones. To release it, the cell is broken open with enzymes suited to its wall: lysozyme for bacteria, cellulase for plant cells, chitinase for fungi.

The released extract also contains RNA, proteins, polysaccharides and lipids. RNA is removed by treatment with ribonuclease, proteins by protease; other molecules by suitable treatments. Finally, adding chilled ethanol makes the purified DNA precipitate out, seen as a collection of fine threads in the suspension (which can be wound on a glass rod — spooling).

✏️ Example 5 — The right enzyme for each job
A laboratory isolates DNA from three sources: a culture of Bacillus, leaves of a tomato plant and the mycelium of Aspergillus (a fungus). (a) Which enzyme is used to break open the cells in each case? (b) After breaking the cells, the extract is treated with two enzymes. Name them and say what each removes. (c) What is added last, and what does the student see? (d) The purified DNA is then incubated with EcoRI. How does the student check that the enzyme has cut the DNA?
(a) Bacillus (bacterial wall): lysozyme. Tomato (cellulose wall): cellulase. Aspergillus (chitin wall): chitinase.
(b) Ribonuclease removes RNA; protease removes proteins, including the histones bound to the DNA.
(c) Chilled ethanol: the DNA precipitates as fine white threads.
(d) By agarose gel electrophoresis: uncut DNA stays as one large molecule near the well; a digested sample shows smaller fragments that run farther.

Often the gene of interest is present in only a few copies — in a drop of blood, a single hair, or a few infected cells. Rather than cloning it in bacteria, it can be copied directly in a test tube.

📘 Definition 9.11 — Polymerase chain reaction (PCR)

PCR makes many copies of a chosen stretch of DNA in vitro, using two sets of primers (small, chemically synthesised oligonucleotides complementary to the regions at the two ends of the target DNA) and a DNA polymerase. Each cycle has three steps:

  1. Denaturation — heating (about 94 °C) separates the two strands of the double-stranded DNA;
  2. Annealing — cooling (roughly 50–60 °C) lets the primers bind to their complementary sequences on the single strands;
  3. Extension — at about 72 °C the polymerase extends the primers, using the nucleotides provided in the reaction and the genomic DNA as template.

The polymerase must survive the repeated heating of denaturation, so a thermostable DNA polymerase is used: Taq polymerase, isolated from the bacterium Thermus aquaticus, which lives in hot springs. Repeated many times, the cycle amplifies the DNA segment to approximately a billion copies. The amplified fragment can then be ligated into a vector for further cloning.

📐 Rule 9.6 — PCR arithmetic

Each cycle (ideally) doubles the number of double-stranded copies. Starting from $N_0$ template molecules, after $n$ cycles

$$N=N_0\times 2^{n}.$$

Useful values: $2^{10}=1024\approx10^{3}$, $2^{20}\approx10^{6}$, $2^{30}=1\,073\,741\,824\approx10^{9}$ — thirty cycles turn one molecule into about a billion, the figure quoted for PCR. To find the cycles needed, count doublings: $n=\log_2(N/N_0)$.

✏️ Example 6 — How many copies, how many cycles?
(a) A forensic sample contains 5 copies of a target sequence. How many copies are present after 30 cycles of ideal PCR? (b) Starting from a single molecule, what is the smallest number of cycles that gives more than one million copies? (c) A PCR machine takes 3 minutes per cycle. How long do the cycles in (b) take?
Find (b), the smallest number of cycles, before you open the solution:
(a) $N=N_0\times2^{n}=5\times2^{30}=5\times1\,073\,741\,824=5\,368\,709\,120\approx5.4\times10^{9}$ copies.
(b) $2^{19}=524\,288\lt 10^{6}$ and $2^{20}=1\,048\,576\gt 10^{6}$, so 20 cycles.
(c) $20\times3=60$ minutes — one hour to make a million copies of a gene, which is why PCR transformed diagnosis and forensics.
Check $2^{10}\approx10^{3}$, so $2^{20}\approx10^{6}$ ✓.

In the PCR lab below, start with 1 molecule. After how many complete cycles do you first have more than 1000 double-stranded copies?

Drag jump to cycle: at cycle 9 the copies readout shows 512, at cycle 10 it shows 1,024 — the first value above 1000, because $2^{10}=1024$. Doubling grows fast: at cycle 30 the readout is 1,073,741,824 (about $10^{9}$). Step through the first three cycles with Next step ▸ to see why each cycle doubles: every strand serves as a template once its partner is pulled away at 94 °C.
Interactive 2 — PCR Cycle Counter

Press Next step ▸ to run PCR one step at a time: denature (94 °C), anneal the primers (55 °C), extend with Taq polymerase (72 °C). The left panel draws every strand for the first cycles (black = original template, blue = new strand, red = primer, green = a strand exactly the length between the primers); the graph on the right plots the number of copies (log scale). Drag jump to cycle or press ▶ Play to run 30 cycles.

0
cycle · step—
temperature—
double-stranded copies—
copies of exact target length—

When the gene has been cloned or amplified and placed in a suitable host, the host can be made to make the protein. If a protein-encoding gene is expressed in a heterologous host (an organism other than its source), the protein is called a recombinant protein. Small cultures in flasks yield too little; large-scale production needs bioreactors.

📘 Definition 9.12 — Bioreactors

Bioreactors are vessels in which large volumes of culture (100–1000 litres) are processed: raw materials are biologically converted into specific products, individual enzymes and so on, by microbial, plant, animal or human cells. A bioreactor provides the optimal conditions for the desired product — the right temperature, pH, substrate, salts, vitamins and oxygen.

  • The most commonly used are of the stirring type. A stirred-tank reactor is usually cylindrical or has a curved base to help mixing; the stirrer mixes the contents evenly and spreads oxygen through the reactor.
  • Alternatively, air can be bubbled through the reactor: in a sparged stirred-tank reactor, sterile air bubbles are sparged in, increasing the surface area available for oxygen transfer.
  • A bioreactor has an agitator system, an oxygen delivery system, a foam control system, a temperature control system, a pH control system and sampling ports so that small volumes of the culture can be withdrawn periodically.

In a continuous culture system the used medium is drained out from one side while fresh medium is added from the other. This keeps the cells in their physiologically most active log (exponential) phase, giving more biomass and a higher yield of the desired protein.

📘 Definition 9.13 — Downstream processing

After the biosynthetic stage, the product has to go through a series of processes before it is ready for marketing as a finished product. These — separation and purification — are collectively called downstream processing. The product is then formulated with suitable preservatives. A drug must also pass through thorough clinical trials, and every product needs strict quality-control testing. The downstream processing and quality-control tests vary from product to product.

✏️ Example 7 — Troubleshooting a bioreactor run
A company grows recombinant E. coli in a 1000-litre stirred tank. Say which control system or procedure is at fault, or which would help, in each case. (a) A thick layer of froth rises and blocks the air exhaust. (b) The cells near the bottom settle and stop growing, while the top layer grows well. (c) As the cells grow, acids accumulate and growth slows. (d) The cells reach the stationary phase after two days and the yield per litre is low; the company wants the cells to stay in the log phase. (e) The harvested broth contains the protein mixed with cells, other proteins and salts.
(a) The foam control system (antifoam agents or a foam breaker).
(b) The agitator system — the stirrer must mix the contents evenly and distribute oxygen; sparging sterile air also helps.
(c) The pH control system, which adds base to hold the pH at the optimum.
(d) Switch to continuous culture: drain used medium and add fresh medium so that the cells stay in the exponential phase and the yield rises.
(e) Downstream processing: separation and purification, then formulation with preservatives and quality-control testing (plus clinical trials if the protein is a drug).

Why is Taq polymerase, rather than an ordinary DNA polymerase, used in PCR?

⚠️ NEET traps — principles and processes

1. EcoRI letter by letter. E = genus Escherichia, co = species coli, R = strain RY13 (not "restriction"), I = first enzyme isolated from that strain.

2. The first restriction endonuclease characterised was Hind II (six-base-pair site), not EcoRI. Over 900 enzymes are now known from more than 230 bacterial strains.

3. Off-centre cuts, same two bases. Restriction enzymes cut both strands a little away from the centre of the palindrome but between the same two bases on the opposite strands — that is what makes sticky ends. Exonucleases act at the ends; restriction enzymes are endonucleases.

4. Gel direction. DNA is negative and moves to the anode; smaller fragments move farther. Bands are seen only after ethidium bromide + UV (bright orange). Agarose comes from seaweed. Cutting out the band and extracting DNA is elution.

5. ori controls copy number; rop codes for replication proteins. Normal E. coli resists none of ampicillin, tetracycline, chloramphenicol, kanamycin.

6. pBR322 sites. BamHI and SalI are in tetᴿ; PstI and PvuI in ampᴿ; PvuII in rop. Insert at BamHI → grows on ampicillin, not tetracycline. In blue–white selection the recombinant colonies are colourless; blue colonies have no insert.

7. Enzymes for isolation. Lysozyme — bacteria; cellulase — plants; chitinase — fungi; ribonuclease removes RNA, protease removes protein; chilled ethanol precipitates DNA.

8. Hosts and delivery. Calcium (divalent cation) + ice → 42 °C → ice for bacteria; micro-injection into the nucleus of animal cells; biolistics (gold/tungsten) for plants; Agrobacterium tumefaciens (Ti plasmid, dicots) and disarmed retroviruses (animals).

9. Numbers. Cohen and Boyer, 1972, plasmid of Salmonella typhimurium; bioreactors 100–1000 L; PCR gives about a billion copies; continuous culture keeps cells in the log phase.

🚀 Beyond NEET — how often does a site occur, and how many PCR copies are exactly right?

Not in the NMC NEET (UG) syllabus; optional background for the curious.

Site frequency. In DNA with the four bases in equal, random proportions, any particular base appears at a position with probability $\tfrac14$, so a particular 6 bp sequence appears about once every $4^{6}=4096$ bp; a 4 bp site (e.g. AluI, AG↓CT) about once every $4^{4}=256$ bp; an 8 bp site (NotI) about once every $4^{8}=65\,536$ bp. That is why "six-cutters" give fragments of a few kilobases and are the workhorses of cloning.

Exact-length PCR products. In cycle 1 the new strands start at a primer but run on past the far end of the target, because the original template is longer. Only from cycle 3 do double-stranded molecules exactly the length between the two primers appear: from one template, $2^{n}-2n$ of the $2^{n}$ molecules after $n$ cycles ($0$ after 2 cycles, $2$ after 3, $8$ after 4). They soon dominate — over 99.99 % after 20 cycles — and that is why a PCR product shows as one sharp band on a gel. Interactive 2's last readout shows this count.

Exercises

I
Principles and restriction enzymes.
  • 1 State the EFB definition of biotechnology in your own words, and name the two core techniques of modern biotechnology with one sentence on each.
  • 2 List the three basic steps in genetically modifying an organism. Why is this better than hybridisation for introducing one desirable character?
  • 3 Why can a free piece of foreign DNA not multiply in a host cell? What must it be linked to?
  • 4 Who constructed the first recombinant DNA, in which year, and using the native plasmid of which bacterium? What did the host cells do with it?
  • 5 Expand each part of the name EcoRI. From which organisms do HindIII and BamHI come?
  • 6 Distinguish an exonuclease from an endonuclease. To which group do restriction enzymes belong?
  • 7 How many of these 6 bp sequences (top strand, 5′ → 3′) are palindromic: GAATTC, GGATCC, GATTAC, AAGCTT, CTGCAG, GTTAAC, ACGTCA?
  • 8 A gene is excised with BamHI. Write the overhang left on it. Explain why it can be ligated into a vector opened with BamHI but not into one opened with HindIII (A↓AGCTT).
1 Biotechnology integrates natural science with organisms, cells, parts of them and molecular analogues to make products and provide services. Genetic engineering alters the genetic material (DNA/RNA) and introduces it into a host to change its phenotype; bioprocess engineering keeps sterile conditions so that only the desired microbe or cell grows, in large quantities, to make products such as antibiotics, vaccines, enzymes.
2 (i) Identify the DNA with the desirable gene; (ii) introduce it into the host; (iii) maintain it in the host and transfer it to the progeny. Hybridisation multiplies undesirable genes along with the wanted one; genetic engineering moves only the wanted gene.
3 It has no origin of replication, so the host's replication machinery never starts copying it. It must be integrated into a molecule with an ori — a plasmid (vector) or the host chromosome.
4 Stanley Cohen and Herbert Boyer, 1972; an antibiotic-resistance gene was linked to a native plasmid of Salmonella typhimurium. In E. coli the host's DNA polymerase replicated the recombinant plasmid into many copies (cloning the antibiotic-resistance gene).
5 E — genus Escherichia; co — species coli; R — strain RY13; I — the first enzyme isolated from that strain. HindIII: Haemophilus influenzae (strain Rd); BamHI: Bacillus amyloliquefaciens (strain H).
6 Exonucleases remove nucleotides from the ends of DNA; endonucleases cut at specific positions within it. Restriction enzymes are endonucleases (both belong to the nucleases).
7 Reverse complements: GAATTC ✓, GGATCC ✓, GATTAC → GTAATC ✗, AAGCTT ✓, CTGCAG ✓, GTTAAC ✓, ACGTCA → TGACGT ✗. Answer: $5$.
8 5′-GATC-3′ single-stranded overhangs. BamHI-cut vector has complementary GATC ends, which pair and are sealed by ligase; HindIII leaves AGCT ends, which are not complementary to GATC, so the ends cannot pair.
II
Gel electrophoresis and restriction mapping.
  • 1 Why does DNA move towards the anode in electrophoresis? Name the usual matrix and its source.
  • 2 Explain why smaller fragments are found farther from the well.
  • 3 How are DNA bands made visible, and what colour are they?
  • 4 What is elution, and why is it done?
  • 5 An enzyme cuts a DNA molecule at 4 sites. How many fragments are made if the DNA is (a) linear; (b) a circular plasmid?
  • 6 A linear DNA of 9 kb has EcoRI sites 2 kb and 6 kb from its left end. Give the fragment sizes and list the bands from the well downwards.
  • 7 A 10 kb plasmid gives 6 kb and 4 kb fragments with HindIII. BamHI alone gives a single 10 kb band. HindIII + BamHI gives 6, 3 and 1 kb. (a) How many HindIII sites and how many BamHI sites does the plasmid have? (b) Where is the BamHI site?
1 DNA carries negative charges on its phosphate groups, so it is attracted to the positive electrode. Agarose, a natural polymer extracted from seaweed.
2 The agarose gel acts as a sieve: long molecules are held back more by the gel's pores than short ones, so in the same time short fragments travel farther.
3 By staining with ethidium bromide and exposing the gel to UV light; the bands glow bright orange.
4 Cutting out the band of the desired fragment and extracting the DNA from the gel piece; the purified fragment is then joined to a vector to make recombinant DNA.
5 (a) $4+1=5$; (b) $4$.
6 Fragments: 0–2 = 2 kb, 2–6 = 4 kb, 6–9 = 3 kb. From the well: 4 kb, 3 kb, 2 kb (largest moves least).
7 (a) Two HindIII sites (a circle with $f=2$ fragments has $c=2$ cuts); one BamHI site (it only linearises the plasmid). (b) The double digest keeps the 6 kb fragment but splits the 4 kb one into 3 + 1, so BamHI lies inside the 4 kb HindIII fragment, 1 kb from one HindIII site and 3 kb from the other.
III
Cloning vectors and competent hosts.
  • 1 State three features a cloning vector must have and the role of each.
  • 2 Why should a cloning vector preferably have only one recognition site for the enzyme used?
  • 3 To obtain many copies of a target gene, what kind of vector would you choose? Which part of the vector decides this?
  • 4 In pBR322, name the two selectable-marker genes and give two restriction sites lying in each.
  • 5 In blue–white selection, what colour are recombinant colonies and why? Why is this method preferred to plating on two antibiotics?
  • 6 Why is Agrobacterium tumefaciens called a natural genetic engineer of plants? What does "disarmed" mean for its Ti plasmid?
  • 7 Match: (a) calcium ions, ice and heat shock; (b) micro-injection; (c) biolistics; (d) disarmed retrovirus — with (i) plant cells bombarded with DNA-coated gold particles; (ii) bacterial cells; (iii) delivering genes into animal cells by infection; (iv) DNA placed directly into the nucleus of an animal cell.
  • 8 Why must bacterial cells be made "competent" before transformation? Describe the steps.
  • 9 Applied. A gene is inserted into the BamHI site of pBR322 and E. coli is transformed. 200 colonies grow on an ampicillin plate; when copied onto a tetracycline plate, 150 of them grow. How many colonies carry the recombinant plasmid?
1 Origin of replication — starts replication and controls the copy number; selectable marker — identifies and eliminates non-transformants (e.g. antibiotic-resistance genes); cloning sites — single recognition sites where the foreign DNA can be ligated, preferably inside a marker gene. (Also: vectors for plants and animals.)
2 Several sites would cut the vector into several fragments, which complicates cloning; with one site the vector is simply opened once and the insert goes in at a known position.
3 A high-copy-number vector (many plasmids per cell, or a bacteriophage); the copy number is controlled by the vector's origin of replication.
4 tetᴿ — BamHI, SalI; ampᴿ — PstI, PvuI.
5 Colourless (white): the insert inactivates the β-galactosidase gene, so the chromogenic substrate is not converted to its blue product. Non-recombinant colonies are blue. One plate is enough, instead of simultaneous plating on two antibiotics.
6 In nature it delivers its T-DNA into the cells of dicot plants, transforming them into tumour cells that make chemicals it needs — it already genetically engineers plants. "Disarmed": the Ti plasmid has been modified so it no longer causes tumours but can still deliver the gene we choose.
7 (a)–(ii); (b)–(iv); (c)–(i); (d)–(iii).
8 DNA is hydrophilic and cannot pass through the cell membrane. Treat the cells with a divalent cation such as calcium (increases DNA entry through pores in the wall), incubate with the rDNA on ice, give a brief heat shock at 42 °C, and return them to ice.
9 All 200 are transformants (ampᴿ intact). The 150 that also grow on tetracycline have an intact tetᴿ — no insert. Recombinants $=200-150=50$.
IV
PCR, bioreactors and downstream processing.
  • 1 Name the enzyme used to break open the cells of (a) a bacterium; (b) a plant; (c) a fungus. Which enzymes remove RNA and protein from the extract, and how is the DNA finally precipitated?
  • 2 Name the three steps of a PCR cycle with their approximate temperatures. Why is Taq polymerase used, and from which organism is it obtained?
  • 3 How many copies of a DNA segment are present after 25 cycles of ideal PCR, starting from one molecule?
  • 4 A sample has 4 template molecules. How many copies are there after 12 cycles?
  • 5 Starting from 3 molecules, how many cycles are needed to obtain 3072 copies?
  • 6 What are primers? Why are two different primers needed?
  • 7 List the control systems of a stirred-tank bioreactor. How does a sparged stirred-tank reactor improve oxygen supply?
  • 8 Why does a continuous culture give a higher yield than letting a batch of cells grow until the medium runs out?
  • 9 What is downstream processing? Name the steps that follow the biosynthetic stage.
  • 10 Applied. A 1000-litre bioreactor produces a recombinant enzyme at 0.5 g per litre. Downstream processing recovers 60 % of it. How many grams of purified enzyme are obtained per batch?
1 (a) lysozyme; (b) cellulase; (c) chitinase. Ribonuclease removes RNA, protease removes proteins; chilled ethanol precipitates the DNA as fine threads.
2 Denaturation (about 94 °C), annealing of primers (about 50–60 °C), extension (about 72 °C). Taq polymerase is thermostable — it stays active through the heating of every denaturation step. It comes from Thermus aquaticus.
3 $2^{25}=33\,554\,432$ copies.
4 $4\times2^{12}=4\times4096=16\,384$ copies.
5 $3072/3=1024=2^{10}$: $10$ cycles.
6 Short, chemically synthesised oligonucleotides complementary to the two ends of the target region. DNA polymerase can only extend an existing primer; one primer binds each strand (at the two ends of the target), so together they define the stretch copied and allow both strands to be copied.
7 Agitator system, oxygen delivery system, foam control system, temperature control system, pH control system and sampling ports. Sparging bubbles sterile air through the medium, increasing the surface area for oxygen transfer.
8 Draining used medium and adding fresh medium keeps the cells in the log (exponential) phase, their most active phase, so biomass and product keep increasing instead of the culture reaching the stationary phase.
9 The processing of the product after biosynthesis to make it ready for marketing: separation and purification, formulation with preservatives, clinical trials (for drugs) and strict quality-control testing.
10 Produced: $1000\ \text{L}\times0.5\ \text{g/L}=500\ \text{g}$; recovered: $0.60\times500=300\ \text{g}$.
🎯 Exam corner NEET · MCQ

E1. NEET · MCQ Statement I: A restriction endonuclease cuts both strands of DNA between the same two bases on opposite strands, a little away from the centre of the palindromic site, leaving sticky ends. Statement II: In the name EcoRI, the letter R stands for "restriction". Choose the correct option. (A) Both statements I and II are correct (B) Both statements I and II are incorrect (C) Statement I is correct but statement II is incorrect (D) Statement I is incorrect but statement II is correct

Check Statement I describes exactly how sticky ends arise ✓. In EcoRI, R is the strain RY13 of E. coli ✗.
Answer (C).

E2. NEET · MCQ Assertion (A): In agarose gel electrophoresis, DNA fragments migrate towards the anode. Reason (R): DNA is a negatively charged molecule. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Idea The phosphate groups give DNA its negative charge, which is precisely why it is pulled towards the positive electrode.
Answer (A).

E3. NEET · MCQ Match List-I with List-II. List-I: (a) Thermus aquaticus (b) Agrobacterium tumefaciens (c) Salmonella typhimurium (d) Escherichia coli RY13. List-II: (i) source of EcoRI (ii) native plasmid used in the first recombinant DNA (iii) thermostable DNA polymerase (iv) Ti plasmid used as a vector for dicots. (A) a-iii, b-iv, c-i, d-ii (B) a-iii, b-iv, c-ii, d-i (C) a-iv, b-iii, c-ii, d-i (D) a-ii, b-iv, c-iii, d-i

Recall Taq polymerase — Thermus aquaticus; Ti plasmid — A. tumefaciens; Cohen and Boyer's plasmid — Salmonella typhimurium; EcoRI — E. coli RY13.
Answer (B).
⏱ Shortcut "RY13" in (d) can only be the EcoRI strain: d-i leaves (B), (C), (D); "Thermus" = heat = Taq: a-iii leaves only (B).

E4. NEET · MCQ How many of the following statements are correct? (i) The origin of replication controls the copy number of the linked DNA. (ii) Normal E. coli cells carry resistance to ampicillin. (iii) Purified DNA is precipitated by adding chilled ethanol. (iv) Chitinase is used to break open fungal cells. (v) Most bioreactors hold 100–1000 litres of culture. (vi) In blue–white selection, colonies carrying the recombinant plasmid are blue. (A) two (B) three (C) five (D) four

Check (i) ✓; (ii) ✗ — normal E. coli resists none of these antibiotics, which is why resistance genes work as markers; (iii) ✓; (iv) ✓; (v) ✓; (vi) ✗ — recombinants are colourless, because the insert inactivates β-galactosidase.
Answer Four: (D).

E5. NEET · MCQ A linear DNA of 10 kb is digested with one restriction enzyme and run beside a size ladder (M). Which map of the enzyme's sites explains lane D?MD10654321 kb(A) sites at 3 kb and 8 kb from the left end (B) a single site at 5 kb (C) sites at 2, 4 and 7 kb from the left end (D) sites at 2.5 kb and 7.5 kb from the left end

Read the gel Lane D has bands at 5, 3 and 2 kb; $5+3+2=10$ kb, so there are three fragments of different sizes: two cuts.
Test the maps (A) 3, 5, 2 ✓. (B) 5 + 5 — one band ✗. (C) 2, 2, 3, 3 — four fragments, two bands at 2 and 3 ✗. (D) 2.5, 5, 2.5 — bands at 5 and 2.5 ✗.
Answer (A).

E6. NEET · MCQ Arrange the steps of recombinant DNA technology in the correct order: (i) ligation of the DNA fragment into a vector (ii) isolation of the genetic material (iii) extraction of the desired product (iv) fragmentation of DNA by restriction endonucleases (v) transfer of the recombinant DNA into the host and culturing it on a large scale. (A) ii, i, iv, v, iii (B) iv, ii, i, v, iii (C) ii, iv, i, v, iii (D) ii, iv, v, i, iii

Logic You cannot cut DNA before isolating it (rules out B), nor ligate before cutting (rules out A), nor put rDNA into a host before it has been made by ligation (rules out D).
Answer (C): isolate → cut → ligate → transfer and culture → extract (downstream processing).
🔬 Research–Teaching NexusResearch-tutored · optional, about 30 minutes

Research question. Real PCR does not quite double the DNA every cycle. How does the copying efficiency change the number of cycles a diagnostic test needs — and why can a laboratory read the amount of virus in a sample from the cycle at which its signal appears?

Why it matters. PCR-based tests for HIV, tuberculosis, hepatitis and influenza are used in hospitals from Delhi to Durban to São Paulo. In "real-time" PCR a fluorescent dye reports the amount of DNA after every cycle, and the cycle at which the signal crosses a detection threshold — the threshold cycle — tells clinicians how much pathogen the sample held: a heavier infection crosses earlier.

What to do.

  1. (Illustrative numbers.) A sample contains $N_0=100$ copies of a viral gene, and the instrument detects the product once there are $10^{10}$ copies. With efficiency $E$ each cycle multiplies the copies by $(1+E)$, so after $n$ cycles $N=N_0(1+E)^{n}$. Find the number of cycles needed for $E=1.0$ (perfect doubling), $E=0.9$ and $E=0.8$. Round up to whole cycles.
  2. With perfect doubling, how many cycles earlier does a sample with $1000$ copies cross the threshold than one with $100$ copies? Explain why every ten-fold difference in starting amount shifts the threshold cycle by the same number of cycles.
  3. Plot $\log_{10}N$ against $n$ for $E=1.0$ and $E=0.8$ on the same axes, from $n=0$ to $n=35$. What shape are the lines, and what does their slope represent?
  4. Suggest two reasons why the efficiency might fall in the late cycles of a real reaction.

Tools: a calculator with a log key or a spreadsheet; Interactive 2 for the ideal case ($E=1$).

Hand in: a table of cycles needed for the three efficiencies, the graph, and a paragraph explaining how the threshold cycle measures the amount of virus.

Going further. Find out how real-time PCR was used during the COVID-19 pandemic, and why a result was often reported as a threshold-cycle value rather than simply "positive".

Instructor note (illustrative data): required factor $10^{10}/100=10^{8}$. $n=8/\log_{10}(1+E)$: $E=1.0$: $8/0.30103=26.6\to27$ cycles; $E=0.9$: $8/0.27875=28.7\to29$; $E=0.8$: $8/0.25527=31.3\to32$. Ten-fold more template: $\log_2 10=3.32$ cycles earlier (about $3$–$4$), the same shift for every ten-fold step because $\log N$ rises linearly with $n$. Plots are straight lines of slope $\log_{10}(1+E)$ ($0.301$ and $0.255$ per cycle). Late-cycle fall-off: primers and nucleotides used up, polymerase losing activity after many heating steps, product strands re-annealing to each other instead of to primers.

🧪 Self-check quiz

0/5 correct

Q1. The first restriction endonuclease that was isolated and characterised, and that cut DNA at a specific six-base-pair sequence, was

Q2. Which enzyme is used to break open fungal cells when isolating their DNA?

Q3. Starting from a single DNA molecule, the number of copies after 10 cycles of ideal PCR is

Q4. In pBR322, a foreign gene is inserted at the BamHI site. The transformed cells carrying the recombinant plasmid will grow on

Q5. DNA fragments separated by agarose gel electrophoresis are seen as bright orange bands