Chapter 13 · Introduction

Chapter 13 — Purification and Characterisation of Organic Compounds

Before an organic compound can be studied it must be made pure, and before it can be named its formula must be known. Sublimation, crystallisation, distillation, extraction and chromatography each exploit one physical difference; Lassaigne's test finds N, S, P and the halogens; and weighing the products of combustion and digestion turns a sample into percentages and a formula.

A pharmaceutical plant in Hyderabad makes paracetamol by the tonne. Before a single batch is pressed into tablets, a chemist recrystallises a sample, checks that it melts sharply at the right temperature, runs it on a thin-layer chromatography plate to make sure it gives one spot and only one, and sends a few milligrams for combustion analysis to confirm that the carbon, hydrogen and nitrogen percentages match $\mathrm{C_{8}H_{9}NO_{2}}$. In a university laboratory a research student extracts the bitter principle from neem leaves with an organic solvent, separates it from a dozen other leaf compounds on a silica column, and then has to answer the first question anyone asks about a new compound: what elements does it contain, and in what ratio? A forensic laboratory matches a seized powder with a known drug by the distance its spot travels on a plate. All three use the same two toolkits — one for purifying an organic compound and one for finding out what is in it.

The first half of the chapter is about purification. A pure compound has a sharp melting point or a constant boiling point, and every method of purification exploits one physical difference between the compound and its impurities: sublimation (volatility of a solid), crystallisation (solubility that changes with temperature), the four kinds of distillation — simple, fractional, under reduced pressure and in steam — (boiling point and vapour pressure), differential extraction (the distribution coefficient $K_D$ between two immiscible solvents), and chromatography (different distribution between a stationary and a mobile phase, measured by $R_f$). The second half is analysis. Lassaigne's test fuses the compound with sodium so that covalent N, S and halogens become ions that simple colour tests can find. Then the quantitative methods — Liebig's combustion for carbon and hydrogen, Dumas and Kjeldahl for nitrogen, Carius for halogens and sulphur, and the precipitation of phosphorus — turn weighed products into percentages, and the percentages into empirical and molecular formulae. NEET tests both halves: which method suits a given mixture, what a test colour or precipitate proves, and short percentage calculations that reward knowing each conversion factor by heart.

Criteria of purity→Sublimation & crystallisation→Four distillations→$K_D$ and extraction→Chromatography, $R_f$→Lassaigne's test→C, H by combustion→N by Dumas & Kjeldahl→X, S, P→Molecular formula
🎯 By the end of this chapter you can…
  • judge purity by melting and boiling points and choose the right method — sublimation, crystallisation, simple, fractional, reduced-pressure or steam distillation, extraction or chromatography — for a given mixture;
  • find the recovery on crystallisation and explain why steam distillation boils below $373\ \mathrm{K}$, using $p^\circ_\text{org}+p^\circ_\text{water}=P_\text{ext}$ to find the mass ratio of the distillate;
  • use the distribution law and $w_n=w_0\left(\tfrac{V}{V+K_Dv}\right)^n$ to compare one large extraction with several small ones;
  • read a TLC plate or a column: calculate $R_f$, relate it to polarity and adsorption, and predict the order of elution;
  • describe Lassaigne's test and identify N, S, N + S together, the halogens and P from the colours and precipitates, with the equations that produce them;
  • calculate $\%\mathrm{C}$ and $\%\mathrm{H}$ from a combustion, $\%\mathrm{N}$ by Dumas (with the aqueous-tension correction) and by Kjeldahl (including back-titration), $\%\mathrm{X}$, $\%\mathrm{S}$ and $\%\mathrm{P}$ from the weighed precipitates, and $\%\mathrm{O}$ by difference or directly;
  • go from analysis data and a molar mass (or vapour density) to the empirical and molecular formula;
  • solve NEET-style MCQs on purification and analysis — including statement, assertion–reason, matching, “how many” and diagram-reading formats — at the NEET pace of about a minute per question, eliminating options where that is faster than solving.

$0.30\ \mathrm{g}$ of ethanoic acid, $\mathrm{CH_{3}COOH}$, is burnt completely in the combustion train. By how much does the mass of the potash (KOH) bulbs increase?

Choose ethanoic acid and a sample of $0.30\ \mathrm{g}$. The sample is $0.005\ \mathrm{mol}$, its two carbons give $0.010\ \mathrm{mol}$ of $\mathrm{CO_{2}}$, and the KOH bulbs gain $0.440\ \mathrm{g}$; the calcium chloride tube, which comes first and takes the water, gains $0.180\ \mathrm{g}$ ($0.18\ \mathrm{g}$ is the water, not the $\mathrm{CO_{2}}$). The readouts give $\%\mathrm{C}=40.0$, $\%\mathrm{H}=6.7$, $\%\mathrm{O}=53.3$ and the empirical formula $\mathrm{CH_{2}O}$ (Result 13.6). Now switch to glucose at $0.30\ \mathrm{g}$: the gains — and the percentages — are exactly the same. Combustion gives only the empirical formula; the molar mass ($60$ against $180\ \mathrm{g\,mol^{-1}}$) is needed to fix the molecular formula.
Teaser — The Combustion Train: From a Sample to a Formula

A weighed sample is burnt in dry oxygen over hot copper(II) oxide. Its hydrogen becomes water, caught by the weighed U-tube of anhydrous calcium chloride; its carbon becomes $\mathrm{CO_{2}}$, caught by the potash bulbs that follow. Choose a compound and a sample mass and press Play; the bars grow as the sample burns. (C = 12, H = 1, O = 16.)

0.30 g
KOH bulbs gain ($\mathrm{CO_{2}}$)—
$\mathrm{CaCl_{2}}$ tube gain ($\mathrm{H_{2}O}$)—
% C · % H · % O—
empirical formula—

Sections in this chapter

🎯 Chapter mixed test NEET · MCQ

Eight original NEET-style problems drawn from both sections and shuffled, as in the real paper; the last one needs both sections at once. Answer each one and press Submit ($+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test to sit them in one go. In NEET you have about one minute per question on average, so the target here is eight minutes. Before you read the options, name the physical difference a purification method uses, the ion a test detects, or the factor that turns a weighed product into its element. (Atomic masses: H 1, C 12, N 14, O 16, Cl 35.5, Ag 108.)

E1. NEET · MCQ The sodium fusion extract of an organic compound gives a Prussian blue colour when boiled with iron(II) sulphate and acidified. Another portion, boiled with dilute nitric acid and then treated with silver nitrate, gives a pale yellow precipitate that dissolves only sparingly in aqueous ammonia. The compound could be (A) 4-bromoaniline (B) 4-chloroaniline (C) bromobenzene (D) 4-iodoaniline

Nitrogen Prussian blue means the extract held cyanide, so the compound contains N (and C). Bromobenzene has no nitrogen: (C) is out.
Halogen Pale yellow and sparingly soluble in ammonia is AgBr; AgCl would be white and soluble, AgI yellow and insoluble (Result 13.5).
Answer (A) 4-bromoaniline, $\mathrm{BrC_{6}H_{4}NH_{2}}$.
⏱ Shortcut Two tests, two eliminations: the nitrogen test removes the one compound without N, and the colour of the silver halide picks one of the three anilines.

E2. NEET · MCQ Given below are two statements. Statement I: Two solids that differ in their solubility in the same solvent can be separated by fractional crystallisation. Statement II: In sublimation the solid first melts, and the liquid then evaporates and condenses on a cool surface. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true

Statement I True: on cooling, the less soluble solid crystallises first and is filtered off; the more soluble one stays in the mother liquor (Section 13.1).
Statement II False: a subliming solid passes directly into vapour without melting, and the vapour turns directly back into solid (Definition 13.2).
Answer (C).

E3. NEET · MCQ In a Kjeldahl determination, the ammonia evolved from $0.60$ g of an organic compound exactly neutralised $20$ mL of $0.50\ \mathrm{M}$ $\mathrm{H_{2}SO_{4}}$. The percentage of nitrogen in the compound is (A) $23.3\%$ (B) $46.7\%$ (C) $93.3\%$ (D) $11.7\%$

Ammonia $n(\mathrm{H_{2}SO_{4}})=20\times0.50=10$ mmol; $\mathrm{2NH_{3}+H_{2}SO_{4}\rightarrow(NH_{4})_{2}SO_{4}}$, so $n(\mathrm{NH_{3}})=20$ mmol.
Nitrogen $20\times10^{-3}\times14=0.28$ g; $\ \tfrac{0.28}{0.60}\times100=46.7\%$ (Result 13.7).
Answer (B) — the value for urea.
⏱ Shortcut $\%\mathrm{N}=\dfrac{1.4NV}{m}=\dfrac{1.4\times1.0\times20}{0.60}=46.7$ with normality $N=2\times0.50$. Option (A) forgets that one $\mathrm{H_{2}SO_{4}}$ takes two $\mathrm{NH_{3}}$.

E4. NEET · MCQ A black ink and three reference dyes P, Q and R are run side by side on the same strip of chromatography paper, as shown. The ink contains (A) P only (B) Q and R (C) P, Q and R (D) P and Rsolvent frontbaselineinkPQR

Read the strip The ink gives two spots. On the same paper, with the same solvent and the same solvent front, a component has the same $R_{f}$ as the pure dye: the upper ink spot is level with P, the lower one with R. Nothing in the ink lane is level with Q.
Answer (D).
⏱ Shortcut Count the ink's spots first: two spots rules out (A) and (C). Running the references on the same strip is what makes the comparison fair; a match in a second solvent would make the identification stronger still.

E5. NEET · MCQ Assertion (A): Aniline can be separated from non-volatile tarry by-products by steam distillation. Reason (R): Aniline is volatile in steam and almost immiscible with water. Choose the correct answer. (A) Both A and R are true, and R is the correct explanation of A (B) Both A and R are true, but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Both statements True. Steam distillation needs exactly the two properties in R: immiscibility (so each liquid exerts its full vapour pressure and the mixture boils below $373$ K) and an appreciable vapour pressure near $373$ K (Principle 13.2). The tar has neither and stays in the flask.
Answer (A).

E6. NEET · MCQ In a Carius determination, $0.20$ g of an organic compound gave $0.287$ g of silver chloride. The percentage of chlorine in the compound is (A) $47.2\%$ (B) $71.0\%$ (C) $35.5\%$ (D) $17.8\%$

Mass of Cl $M(\mathrm{AgCl})=143.5$; $\ m(\mathrm{Cl})=\tfrac{35.5}{143.5}\times0.287=0.071$ g (Result 13.8).
Percentage $\tfrac{0.071}{0.20}\times100=35.5\%$.
Answer (C).
⏱ Shortcut $0.287$ g is exactly $0.002$ mol of AgCl, i.e. $0.071$ g of Cl. (A) divides by $108$ instead of $143.5$; (B) uses $71$ for one chlorine atom.

E7. NEET · MCQ Match List-I (observation with the sodium fusion extract or test solution) with List-II (element shown). List-I: (a) violet colour with sodium nitroprusside (b) canary-yellow precipitate with ammonium molybdate (c) blood-red colour with iron(III) chloride (d) white precipitate with silver nitrate, soluble in aqueous ammonia. List-II: (i) phosphorus (ii) nitrogen and sulphur together (iii) chlorine (iv) sulphur. Choose the correct option. (A) a-ii, b-i, c-iv, d-iii (B) a-iv, b-iii, c-ii, d-i (C) a-iv, b-i, c-iii, d-ii (D) a-iv, b-i, c-ii, d-iii

Each test (a) $\mathrm{S^{2-}}$ + nitroprusside → violet: iv. (b) ammonium phosphomolybdate: i. (c) $\mathrm{[Fe(SCN)]^{2+}}$: ii. (d) AgCl: iii (Result 13.5).
Answer (D) a-iv, b-i, c-ii, d-iii.
⏱ Shortcut a-iv removes (A); b-i removes (B); (C) and (D) differ only in c and d, and a white precipitate with silver ions cannot mean "N and S".

E8. NEET · MCQ How many of the following pairs are correctly matched? (i) glycerol from spent lye — distillation under reduced pressure (ii) camphor mixed with common salt — sublimation (iii) $o$-nitrophenol from $p$-nitrophenol — fractional crystallisation (iv) nitrogen in pyridine — Kjeldahl's method (v) chlorine in an organic compound — Carius method (vi) amino acids on a TLC plate — spraying with ninhydrin (A) $3$ (B) $4$ (C) $5$ (D) $2$

Section 13.1 (i) correct — glycerol decomposes at its normal boiling point. (ii) correct — camphor sublimes, salt does not. (iii) wrong — the isomers are separated by steam distillation: the $o$-isomer, with its intramolecular hydrogen bond, is steam-volatile. (vi) correct — ninhydrin gives purple spots.
Section 13.2 (iv) wrong — ring nitrogen is not converted into ammonium sulphate; Dumas' method is needed. (v) correct — the halogen is weighed as AgCl.
Answer (B) $4$.
⏱ Shortcut Mark ✓ or ✗ beside each pair as you read. The two wrong pairs are the two classic NCERT exceptions — "$o$-nitrophenol goes with steam" and "Kjeldahl fails for ring, nitro and azo nitrogen".
✅ Before you start
Every calculation in Section 13.2 is the mole concept at work: moles from masses, percentage composition and the empirical and molecular formula (Section 1.2), and balanced equations and stoichiometry (Section 1.3). Kjeldahl's method is an acid–base back-titration, so you need molarity (Section 5.1) and neutralisation (Section 6.3). Fractional and steam distillation rest on vapour pressure and Raoult's law (Section 5.2), and the distribution law is an equilibrium between two phases (Section 6.1). The chromatography and polarity arguments use dipole moments and hydrogen bonding (Section 3.2, Section 3.4). From physics: the combined gas law $\dfrac{p_1V_1}{T_1}=\dfrac{p_2V_2}{T_2}$ and Dalton's law of partial pressures, used to correct a gas volume to STP.