Chapter 16 · Introduction

Chapter 16 — Organic Compounds Containing Halogens

Put a halogen on carbon and you get a polar, breakable C–X bond. How haloalkanes and haloarenes are named, made and ranked by their physical properties; how a nucleophile replaces the halogen by the one-step SN2 or the two-step SN1 path; how elimination and metals compete; and what chloroform, iodoform, freons and DDT have done for us and to the environment.

In 1847 chloroform put its first surgical patients to sleep, and for decades it was the anaesthetic of choice — until doctors learnt that it damages the liver and that, left in light and air, it slowly turns into the war gas phosgene. Freons, the chlorofluorocarbons that once filled every refrigerator and spray can, were prized because they are inert and non-toxic; that very inertness let them drift up to the stratosphere, where ultraviolet light breaks their C–Cl bonds and the chlorine atoms destroy ozone, opening the ozone hole that the Montreal Protocol was signed to close. DDT saved millions of lives from malaria and then thinned the eggshells of birds of prey, because it does not break down and dissolves in fat. The PVC pipe under your sink, the iodoform in an old antiseptic powder and the thyroxine made by your thyroid gland are halogen compounds too. Their usefulness and their dangers both come from one bond — the carbon–halogen bond — and from how easily it can, or cannot, be broken.

The chapter has two halves. The first describes the compounds: the classification of haloalkanes and haloarenes by the carbon that carries the halogen ($1^\circ$, $2^\circ$, $3^\circ$, allylic, benzylic, vinylic, aryl) and their IUPAC names; the nature of the C–X bond — its polarity, length and strength, and why the bond of a haloarene is shorter, stronger and harder to break; the preparations from alcohols (HX, $\mathrm{PCl_{3}}$, $\mathrm{PCl_{5}}$, $\mathrm{SOCl_{2}}$), from hydrocarbons, and by the Finkelstein and Swarts halogen exchanges; and the trends in boiling point, density and dipole moment. The second half is about reactions. A nucleophile can replace the halogen in one concerted step from the back, SN2, with inversion of configuration, or after the halide has left as a carbocation, SN1, with racemisation; the substrate, nucleophile, solvent and leaving group decide which. Elimination by alcoholic KOH competes and follows Saytzeff's rule; sodium (Wurtz) and magnesium (Grignard reagents) make new C–C and C–metal bonds; haloarenes resist nucleophiles unless nitro groups help, but undergo electrophilic substitution at the ortho and para positions. The chapter ends with the uses and environmental effects of chloroform, iodoform, freons and DDT. NEET asks about this unit every year — reagent and product questions, SN1/SN2 and elimination, reactivity orders, named reactions and the uses and effects of the polyhalogen compounds — mostly as statement, matching and "how many" MCQs that reward one habit: look first at the carbon that carries the halogen.

Classes of R–X→$\mathrm{C^{\delta+}{-}X^{\delta-}}$ bond→Preparation→Physical properties→SN2: inversion→SN1: racemisation→Elimination, Saytzeff→Wurtz & Grignard→Haloarenes→$\mathrm{CHCl_{3}}$, $\mathrm{CHI_{3}}$, freons, DDT
🎯 By the end of this chapter you can…
  • classify a halide as $1^\circ$, $2^\circ$, $3^\circ$, allylic, benzylic, vinylic or aryl and give its IUPAC name;
  • explain the polarity, length and strength of the C–X bond and why aryl and vinyl halides resist substitution (resonance, $sp^{2}$ carbon, phenyl cation);
  • choose a preparation — HX with ZnCl₂, $\mathrm{PCl_{3}}$, $\mathrm{PCl_{5}}$, $\mathrm{SOCl_{2}}$, halogenation, Finkelstein, Swarts — and calculate the reagent needed;
  • rank halides by boiling point, density and dipole moment;
  • write the SN2 and SN1 mechanisms with their rate laws and stereochemistry, and decide which path a given halide, nucleophile and solvent will take;
  • predict the products of ambident nucleophiles ($\mathrm{CN^{-}}$/AgCN, $\mathrm{NO_{2}^{-}}$/$\mathrm{AgNO_{2}}$) and of elimination by Saytzeff's rule;
  • use the Wurtz, Wurtz–Fittig and Grignard reactions, including the alkane formed when a Grignard reagent meets an acidic hydrogen;
  • explain the reactions of haloarenes — nucleophilic substitution helped by ortho/para nitro groups, and ortho/para electrophilic substitution — and the uses and environmental effects of chloroform, iodoform, freons and DDT;
  • solve NEET-style MCQs on halogen compounds — including statement, assertion–reason, matching, “how many” and graph- or diagram-reading formats — at the NEET pace of about a minute per question, eliminating options where that is faster than solving.

Which bromide reacts fastest by the SN2 path with a strong nucleophile such as $\mathrm{CN^{-}}$ in a polar aprotic solvent?

Choose the strong-nucleophile conditions and step through the four bromides. The readouts show SN2, $30\times$ ethyl for $\mathrm{CH_{3}Br}$, $1\times$ for $\mathrm{CH_{3}CH_{2}Br}$, $0.02\times$ for $\mathrm{(CH_{3})_{2}CHBr}$, and no SN2 for $\mathrm{(CH_{3})_{3}CBr}$: the nucleophile must reach the back of the carbon, and every methyl group is in the way (Rule 16.6). Carbocation stability matters only for SN1 — switch to water and $\mathrm{(CH_{3})_{3}CBr}$ becomes the fastest by far, about $10^{8}$ times $\mathrm{CH_{3}Br}$, by the two-step SN1 path (Rule 16.7). Watch the animation too: SN2 flips the three groups like an umbrella (inversion); SN1 lets the nucleophile in from both faces (racemisation).
Teaser — SN2 or SN1? Watch the Halogen Leave

The three groups on the carbon are coloured so that you can follow them. In SN2 the nucleophile attacks from the side opposite the bromine and the groups turn inside out; in SN1 the bromide leaves first, the carbocation flattens, and the nucleophile can attack either face. Choose a bromide and the conditions, then press Play.

path—
relative rate—
stereochemical result—

Sections in this chapter

🎯 Chapter mixed test NEET · MCQ

Eight original NEET-style problems drawn from both sections and shuffled, as in the real paper; several need both sections (and Chapter 15) at once. Answer each one and press Submit ($+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test to sit them in one go. In NEET you have about one minute per question on average, so the target here is eight minutes. Before choosing a product, look at the carbon that carries the halogen ($sp^{3}$ or $sp^{2}$; methyl, $1^{\circ}$, $2^{\circ}$, $3^{\circ}$, allylic or benzylic), then at the reagent and the solvent.

E1. NEET · MCQ Propan-1-ol is treated with $\mathrm{SOCl_{2}}$ to give P. P is heated with alcoholic KOH to give Q. Q reacts with HBr in the absence of peroxide to give R, and R is warmed with aqueous KOH to give S. S is (A) propan-2-ol (B) propan-1-ol (C) propene (D) 2-bromopropane

P and Q $\mathrm{CH_{3}CH_{2}CH_{2}OH+SOCl_{2}\rightarrow CH_{3}CH_{2}CH_{2}Cl+SO_{2}+HCl}$ (Section 16.1). Alcoholic KOH eliminates HCl: Q is propene, $\mathrm{CH_{3}CH{=}CH_{2}}$ (Definition 16.8).
R and S Without peroxide HBr adds by Markovnikov's rule (Section 15.2): R is 2-bromopropane. Aqueous KOH substitutes: S is propan-2-ol, $\mathrm{(CH_{3})_{2}CHOH}$.
Answer (A).
⏱ Shortcut The sequence "alcohol → halide → alkene → Markovnikov HBr → aqueous KOH" moves the OH from C-1 to C-2. Option (D) is R, not S — a common slip when one step is skipped.

E2. NEET · MCQ Given below are two statements. Statement I: Allylic and benzylic halides are more reactive than vinylic and aryl halides in nucleophilic substitution. Statement II: In 3-chloropropene and in (chloromethyl)benzene the chlorine is bonded to an $sp^{2}$-hybridised carbon. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true

Statement I True. Allylic and benzylic halides ionise easily to resonance-stabilised cations (fast SN1) and, being primary, are also fast by SN2 (Rule 16.7). Vinylic and aryl halides react by neither path (Rule 16.2).
Statement II False. In $\mathrm{CH_{2}{=}CHCH_{2}Cl}$ and $\mathrm{C_{6}H_{5}CH_{2}Cl}$ the Cl is on the $sp^{3}$ $\mathrm{CH_{2}}$ group next to the π system (Definition 16.2).
Answer (C).
⏱ Shortcut If Statement II were true, these halides would behave like vinyl and aryl halides and Statement I would be false. The two cannot both be true, which removes (A) at once.

E3. NEET · MCQ Assertion (A): With cyanide ion in DMSO, 2-bromo-2-methylpropane undergoes SN2 substitution faster than bromomethane. Reason (R): A tertiary carbocation is more stable than a methyl carbocation. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Assertion False. SN2 needs back-side attack; three methyl groups block it completely, so the order is $\mathrm{CH_{3}X}\gt1^{\circ}\gt2^{\circ}\gg3^{\circ}$ (Rule 16.6). With a strongly basic nucleophile the tertiary bromide eliminates instead.
Reason True (hyperconjugation and $+I$ effect of three alkyl groups) — but carbocation stability governs SN1, which has no place in an SN2 comparison.
Answer (D).
⏱ Shortcut "SN2" + "tertiary" + "faster" in one sentence is false. Carbocation arguments belong to SN1 only.

E4. NEET · MCQ The bar chart shows the dipole moments of $\mathrm{CH_{3}F}$, $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{3}Br}$ and $\mathrm{CH_{3}I}$ in some order (note that the axis starts at $1.60\ \mathrm{D}$). Bars W, X, Y and Z are, respectively, (A) $\mathrm{CH_{3}F}$, $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{3}Br}$, $\mathrm{CH_{3}I}$ (B) $\mathrm{CH_{3}Br}$, $\mathrm{CH_{3}F}$, $\mathrm{CH_{3}I}$, $\mathrm{CH_{3}Cl}$ (C) $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{3}F}$, $\mathrm{CH_{3}Br}$, $\mathrm{CH_{3}I}$ (D) $\mathrm{CH_{3}Br}$, $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{3}I}$, $\mathrm{CH_{3}F}$ 1.601.701.801.90 dipole moment / D WXYZ 1.8301.8471.6361.860

The order to recall $\mu=\delta e\times d$: fluorine gives the largest charge but the shortest bond, so $\mathrm{CH_{3}Cl}\ (1.860)\gt\mathrm{CH_{3}F}\ (1.847)\gt\mathrm{CH_{3}Br}\ (1.830)\gt\mathrm{CH_{3}I}\ (1.636\ \mathrm{D})$ (Rule 16.1).
Match the bars Tallest Z = $\mathrm{CH_{3}Cl}$; next X = $\mathrm{CH_{3}F}$; then W = $\mathrm{CH_{3}Br}$; shortest Y = $\mathrm{CH_{3}I}$.
Answer (B).
⏱ Shortcut The shortest bar must be $\mathrm{CH_{3}I}$, so Y = I, leaving (B) and (D). The tallest bar is $\mathrm{CH_{3}Cl}$, not $\mathrm{CH_{3}F}$: that decides for (B).

E5. NEET · MCQ Match List-I (compound) with List-II (property or effect).
List-I: P. $\mathrm{CHCl_{3}}$ · Q. $\mathrm{CHI_{3}}$ · R. $\mathrm{CCl_{2}F_{2}}$ · S. DDT
List-II: I. a refrigerant whose chlorine atoms destroy stratospheric ozone · II. an insecticide that accumulates in fatty tissue along food chains · III. once used as an antiseptic, acting through the iodine it releases · IV. slowly oxidised by air in light to a very poisonous gas
Choose the correct answer. (A) P-IV, Q-III, R-I, S-II (B) P-III, Q-IV, R-I, S-II (C) P-IV, Q-III, R-II, S-I (D) P-I, Q-III, R-IV, S-II

Match Chloroform → phosgene, $\mathrm{2CHCl_{3}+O_{2}\rightarrow2COCl_{2}+2HCl}$ (IV). Iodoform → antiseptic through liberated iodine (III). Freon-12 → refrigerant and ozone depletion (I). DDT → insecticide, fat-soluble and persistent (II).
Answer (A) P-IV, Q-III, R-I, S-II.
⏱ Shortcut Only iodoform contains iodine, so Q-III; that removes (B). Freon is the refrigerant, R-I; that removes (C) and (D).

E6. NEET · MCQ How many of the following give an alkane as the main organic product? (i) $\mathrm{C_{2}H_{5}MgBr+H_{2}O}$ (ii) $\mathrm{CH_{3}Br+Na}$, dry ether (iii) $\mathrm{C_{2}H_{5}Br}$ + alcoholic KOH, heat (iv) $\mathrm{CH_{3}I}$ + aqueous KOH (v) $\mathrm{C_{6}H_{5}Cl+CH_{3}Cl+Na}$, dry ether (vi) $\mathrm{CH_{3}MgI+CH_{3}OH}$ (vii) $\mathrm{C_{2}H_{5}Br+LiAlH_{4}}$ (A) $3$ (B) $5$ (C) $2$ (D) $4$

Alkanes (i) ethane: water protonates the Grignard carbon. (ii) ethane, by the Wurtz reaction. (vi) methane: methanol has an active O–H hydrogen. (vii) ethane: hydride replaces bromide (Rule 16.5).
Not alkanes (iii) ethene (elimination). (iv) methanol (substitution). (v) toluene — an arene, from the Wurtz–Fittig reaction.
Answer (D) $4$ — (i), (ii), (vi) and (vii).
⏱ Shortcut A Grignard reagent plus anything with O–H always gives the alkane; KOH never does. Watch the Wurtz–Fittig trap: its product contains a benzene ring.

E7. NEET · MCQ An optically active sample of 2-iodobutane is warmed in acetone with sodium iodide containing radioactive iodide ions, $\mathrm{{}^{*}I^{-}}$. Each molecule of 2-iodobutane that takes up a radioactive iodine atom (A) keeps its original configuration (retention) (B) has its configuration inverted, by one-step back-side attack (C) becomes racemic, because the reaction goes through a carbocation (D) loses its stereocentre, because the two iodine atoms are identical

Mechanism A secondary iodide, a strong anionic nucleophile and an aprotic solvent: SN2 (Rule 16.8). The $\mathrm{{}^{*}I^{-}}$ enters from the side opposite the leaving $\mathrm{I^{-}}$, and the other three groups flip over (Definition 16.6).
Eliminate (A) would need no bond to the stereocentre to break, but the C–I bond does break. (C) needs SN1 conditions (a protic solvent, a weak nucleophile). (D) C-2 still carries H, $\mathrm{CH_{3}}$, $\mathrm{C_{2}H_{5}}$ and I — it is still a stereocentre.
Answer (B).
⏱ Shortcut Decide the mechanism first from the conditions; the stereochemistry follows: SN2 → inversion, SN1 → racemisation, no bond broken → retention.

E8. NEET · MCQ 2-Bromo-3-methylbutane, $\mathrm{CH_{3}CH(Br)CH(CH_{3})_{2}}$, is heated with alcoholic KOH. The major product and the number of structurally different alkenes that can form are (A) 3-methylbut-1-ene; 2 (B) 2-methylbut-2-ene; 3 (C) 2-methylbut-2-ene; 2 (D) 2-methylbut-1-ene; 2

β-Hydrogens The α-carbon C-2 has two β-carbons: C-1 ($\mathrm{CH_{3}}$) and C-3 (CH). Losing H from C-1 gives 3-methylbut-1-ene, $\mathrm{CH_{2}{=}CHCH(CH_{3})_{2}}$; losing H from C-3 gives 2-methylbut-2-ene, $\mathrm{CH_{3}CH{=}C(CH_{3})_{2}}$ — two alkenes.
Saytzeff 2-Methylbut-2-ene has three alkyl groups on C=C against one, so it is the major product (Rule 16.9). 2-Methylbut-1-ene cannot form: its C=C would have to join C-3 to one of its methyl groups, and neither of those carbons carries the Br — the new double bond of a β-elimination always includes the carbon that lost X.
Answer (C).
⏱ Shortcut Number of structural alkenes = number of different kinds of β-carbon that carry H. The major alkene takes H from the β-carbon with the fewest hydrogens.
✅ Before you start
The mechanisms of this chapter are built from Section 14.3: heterolysis, carbocations and their stability, nucleophiles and electrophiles, and the inductive and resonance effects. Inversion and racemisation need chirality and enantiomers (Section 14.2), and names follow Section 14.1. Free-radical halogenation (Section 15.1), Markovnikov addition, the peroxide effect and Saytzeff's rule (Section 15.2) and electrophilic substitution with directing groups (Section 15.4) are used to make and react halides. Rate laws, order and molecularity (Section 8.1) separate SN1 from SN2, and electronegativity and dipole moments (Section 3.2) explain the polar C–X bond.