8.2 Integrated Rate Laws and Half-Life
A rate law tells you how fast a reaction goes now; integrating it tells you how much is left after any time. For zero- and first-order reactions this gives straight-line plots, half-lives and the famous $k=\tfrac{2.303}{t}\log\tfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}$ — the tools for every NEET kinetics calculation.
A pharmacist wants to know when a bottle of eye drops will have lost 10% of its active ingredient. A doctor needs to know how long a dose of a drug stays above the effective level in the blood. An environmental agency must estimate how long a pesticide lingers in soil. None of these questions asks for a rate; each asks for a time or an amount left. The rate law of Section 8.1, $r=-d[\mathrm{A}]/dt=k[\mathrm{A}]^{n}$, is a differential equation: it tells us how fast $[\mathrm{A}]$ is changing at each moment. To answer "how much after a given time?" we must add up those changes — we must integrate the rate law.
In this section we integrate the two simplest and most important cases: zero-order reactions, whose rate does not depend on concentration, and first-order reactions, whose rate is proportional to it. Each gives a characteristic straight-line graph and a characteristic half-life. We then see how first-order reactions are followed in practice — by the total pressure of a gas, by titration, by optical rotation — meet pseudo-first-order reactions, and learn how the half-life reveals the order. You need the rate law, order and units of $k$ from Section 8.1; the effect of temperature on $k$ comes in Section 8.3.
Mathematics used in this section: $\ln x=2.303\log x$ (log = log to base 10); $\ln2=0.693$, $\log2=0.301$, $\log3=0.477$, $\log5=0.699$; $\int\dfrac{dx}{x}=\ln x+C$. For a reaction $\mathrm{A}\rightarrow\text{products}$ we write the rate law as $-d[\mathrm{A}]/dt=k[\mathrm{A}]^{n}$, so $k$ refers to the disappearance of A. Older books write $a$ for $[\mathrm{A}]_{0}$ and $a-x$ for $[\mathrm{A}]$ after an amount $x$ has reacted.
Zero-order reactions
A zero-order reaction runs at a constant rate, whatever the concentration of the reactant. That sounds strange — surely fewer molecules must react more slowly? — until you see where it happens. When ammonia decomposes on the surface of hot platinum at high pressure, the metal surface is completely covered with ammonia molecules; adding more gas cannot cover it any more, so the number of molecules reacting per second is fixed by the number of surface sites. The decomposition of HI on a gold surface, and enzyme reactions when the enzyme is saturated with substrate, behave in the same way. The reactant is in effect queuing for a limited number of "service counters".
Integration. For $\mathrm{A}\rightarrow\text{products}$ with $n=0$:
$$-\frac{d[\mathrm{A}]}{dt}=k\quad\Rightarrow\quad d[\mathrm{A}]=-k\,dt.$$Integrating from $t=0$, where $[\mathrm{A}]=[\mathrm{A}]_{0}$, to time $t$:
$$\int_{[\mathrm{A}]_{0}}^{[\mathrm{A}]}d[\mathrm{A}]=-k\int_{0}^{t}dt\ \Rightarrow\ [\mathrm{A}]-[\mathrm{A}]_{0}=-kt.$$For a zero-order reaction $\mathrm{A}\rightarrow\text{products}$ with rate constant $k$ (units $\mathrm{mol\,L^{-1}\,s^{-1}}$):
$$[\mathrm{A}]=[\mathrm{A}]_{0}-kt,\qquad k=\frac{[\mathrm{A}]_{0}-[\mathrm{A}]}{t}.$$- A graph of $[\mathrm{A}]$ against $t$ is a straight line of slope $-k$ and intercept $[\mathrm{A}]_{0}$; the rate–$[\mathrm{A}]$ graph is a horizontal line.
- The equation holds only while A remains: the reaction is complete at $t=[\mathrm{A}]_{0}/k$, and stops abruptly there (in reality the order changes as the surface stops being saturated near the end).
- Half-life: $t_{1/2}=\dfrac{[\mathrm{A}]_{0}}{2k}$ — proportional to the initial concentration.
The half-life $t_{1/2}$ of a reaction is the time in which the concentration of a reactant falls to half its initial value, $[\mathrm{A}]=\tfrac12[\mathrm{A}]_{0}$. More generally, $t_{x\%}$ (for example $t_{75\%}$) is the time in which $x\%$ of the reactant has reacted.
Putting $[\mathrm{A}]=\tfrac12[\mathrm{A}]_{0}$ into Result 8.5 gives $\tfrac12[\mathrm{A}]_{0}=kt_{1/2}$, hence $t_{1/2}=[\mathrm{A}]_{0}/2k$. Because the amount removed per minute is fixed, each successive half-life is half as long as the one before: the second half-life (from $\tfrac12[\mathrm{A}]_{0}$ to $\tfrac14[\mathrm{A}]_{0}$) takes $[\mathrm{A}]_{0}/4k$.
A zero-order reaction has a half-life of $20$ min when $[\mathrm{A}]_{0}=0.40\ \mathrm{mol\,L^{-1}}$. How long does it take for A to be used up completely?
First-order reactions
Most simple decompositions and isomerisations are first order: the decomposition of $\mathrm{N_{2}O_{5}}$, of $\mathrm{H_{2}O_{2}}$, of $\mathrm{SO_{2}Cl_{2}}$, the isomerisation of cyclopropane to propene. (The decay of radioactive nuclei follows the same law.) In a first-order reaction each molecule has the same, fixed chance of reacting in the next second, independent of how many others there are — so the number reacting per second is proportional to the number present.
Integration. With $n=1$:
$$-\frac{d[\mathrm{A}]}{dt}=k[\mathrm{A}]\quad\Rightarrow\quad\frac{d[\mathrm{A}]}{[\mathrm{A}]}=-k\,dt.$$Integrating from $([\mathrm{A}]_{0},\,0)$ to $([\mathrm{A}],\,t)$:
$$\ln[\mathrm{A}]-\ln[\mathrm{A}]_{0}=-kt\ \Rightarrow\ \ln\frac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=kt.$$For a first-order reaction $\mathrm{A}\rightarrow\text{products}$ with rate constant $k$ (units $\mathrm{s^{-1}}$, $\mathrm{min^{-1}}$, …):
$$k=\frac{1}{t}\ln\frac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=\frac{2.303}{t}\log\frac{[\mathrm{A}]_{0}}{[\mathrm{A}]},$$ $$[\mathrm{A}]=[\mathrm{A}]_{0}\,e^{-kt}.$$Between any two times, $k=\dfrac{2.303}{t_{2}-t_{1}}\log\dfrac{[\mathrm{A}]_{1}}{[\mathrm{A}]_{2}}$. Graphs: $[\mathrm{A}]$ against $t$ is an exponential decay that never quite reaches zero; $\ln[\mathrm{A}]$ against $t$ is a straight line of slope $-k$ and intercept $\ln[\mathrm{A}]_{0}$; $\log[\mathrm{A}]$ against $t$ has slope $-k/2.303$; $\log\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}$ against $t$ is a line through the origin of slope $k/2.303$; and the rate–$[\mathrm{A}]$ graph is a line through the origin of slope $k$.
Because only the ratio $[\mathrm{A}]_{0}/[\mathrm{A}]$ appears, any quantity proportional to the concentration can be used instead — moles, mass, partial pressure, a titre, an absorbance. This is the great practical convenience of first-order kinetics, and it is why $k$ has no concentration unit.
Half-life of a first-order reaction. Put $[\mathrm{A}]=\tfrac12[\mathrm{A}]_{0}$ into Result 8.6: $kt_{1/2}=\ln2$, so
$$t_{1/2}=\frac{\ln2}{k}=\frac{0.693}{k}.$$The initial concentration has dropped out. Whether you start with a litre of $1\ \mathrm{mol\,L^{-1}}$ solution or a trace, half of it is gone after the same time; after $n$ half-lives a fraction $\left(\tfrac12\right)^{n}$ remains. The same logic gives every "fractional life":
- $t_{75\%}=\dfrac{2.303}{k}\log4=2\,t_{1/2}$, $\ t_{87.5\%}=3\,t_{1/2}$, $\ t_{93.75\%}=4\,t_{1/2}$.
- $t_{90\%}=\dfrac{2.303}{k}$, $\ t_{99\%}=2\,t_{90\%}$, $\ t_{99.9\%}=3\,t_{90\%}\approx10\,t_{1/2}$ (exactly $9.97\,t_{1/2}$).
- A first-order reaction is never complete in a finite time; "practically complete" usually means $99.9\%$, about ten half-lives.
In the concentration–time lab, choose first order with $k=0.035\ \mathrm{min^{-1}}$ and $[\mathrm{A}]_{0}=0.80\ \mathrm{mol\,L^{-1}}$, and note the half-life. Now halve $[\mathrm{A}]_{0}$ to $0.40$. What happens to the half-life?
A first-order reaction has a half-life of $15$ min. What percentage of the reactant has reacted after $45$ min?
Following first-order reactions in the laboratory; pseudo-first-order reactions
To use Result 8.6 we need a measurable quantity that is proportional to $[\mathrm{A}]$, or a combination of measurements from which $[\mathrm{A}]$ can be worked out. Three methods are common in NEET problems.
1. Gas-phase decomposition followed by total pressure. Consider $\mathrm{A(g)}\rightarrow\mathrm{B(g)}+\mathrm{C(g)}$ in a closed vessel at constant volume and temperature. Only the total pressure $p_{t}$ is read on the gauge. Let the initial pressure (pure A) be $p_{0}$, and let A's partial pressure fall by $x$ at time $t$:
| $\mathrm{A(g)}$ | $\rightarrow$ | $\mathrm{B(g)}$ | $+$ | $\mathrm{C(g)}$ | total | |
|---|---|---|---|---|---|---|
| $t=0$ | $p_{0}$ | $0$ | $0$ | $p_{0}$ | ||
| time $t$ | $p_{0}-x$ | $x$ | $x$ | $p_{t}=p_{0}+x$ |
So $x=p_{t}-p_{0}$ and $p_{\mathrm{A}}=p_{0}-x=2p_{0}-p_{t}$. Since partial pressure is proportional to concentration at constant $T$ and $V$,
$$k=\frac{2.303}{t}\log\frac{p_{0}}{2p_{0}-p_{t}}.$$Gas, constant $V$ and $T$: if one molecule of A gives $n$ gas molecules in all ($\mathrm{A(g)}\rightarrow$ products, $n\gt1$), then $p_{t}=p_{0}+(n-1)x$ and
$$p_{\mathrm{A}}=\frac{np_{0}-p_{t}}{n-1},\qquad k=\frac{2.303}{t}\log\frac{p_{0}}{p_{\mathrm{A}}}.$$The final pressure is $p_{\infty}=np_{0}$; then also $p_{\mathrm{A}}\propto p_{\infty}-p_{t}$ and $p_{0}\propto p_{\infty}-p_{0}$, so $k=\dfrac{2.303}{t}\log\dfrac{p_{\infty}-p_{0}}{p_{\infty}-p_{t}}$. ($n=2$ for $\mathrm{SO_{2}Cl_{2}\rightarrow SO_{2}+Cl_{2}}$; $n=2.5$ for $\mathrm{N_{2}O_{5}\rightarrow2NO_{2}+\tfrac12O_{2}}$.)
Titration of the reactant (e.g. $\mathrm{H_{2}O_{2}}$ with $\mathrm{KMnO_{4}}$; titre $V\propto[\mathrm{A}]$): $k=\dfrac{2.303}{t}\log\dfrac{V_{0}}{V_{t}}$.
Titration of a product (e.g. acid formed in ester hydrolysis, titrated with NaOH): $k=\dfrac{2.303}{t}\log\dfrac{V_{\infty}-V_{0}}{V_{\infty}-V_{t}}$.
Optical rotation (inversion of cane sugar): $k=\dfrac{2.303}{t}\log\dfrac{r_{0}-r_{\infty}}{r_{t}-r_{\infty}}$. In every case the expression is "(total change still to come at the start) ÷ (change still to come at $t$)".
2. Pseudo-first-order reactions. Many reactions with two reactants behave as first-order reactions because one reactant is present in huge excess. In the acid-catalysed hydrolysis of ethyl acetate,
$$\mathrm{CH_{3}COOC_{2}H_{5}+H_{2}O\xrightarrow{H^{+}}}$$ $$\mathrm{CH_{3}COOH+C_{2}H_{5}OH},$$the rate law is $r=k'[\mathrm{CH_{3}COOC_{2}H_{5}}][\mathrm{H_{2}O}]$. But the reaction is carried out in water: $[\mathrm{H_{2}O}]$ is about $55\ \mathrm{mol\,L^{-1}}$ and hardly changes while a $0.1\ \mathrm{mol\,L^{-1}}$ ester is hydrolysed. So $k'[\mathrm{H_{2}O}]$ is practically constant and $r=k[\mathrm{ester}]$ with $k=k'[\mathrm{H_{2}O}]$.
A pseudo-first-order reaction is a reaction of higher order whose rate behaves as first order because every reactant except one is present in such large excess (or is held constant, like a catalyst) that its concentration does not change appreciably. The observed first-order constant contains the constant concentrations: $k_{\text{obs}}=k'[\mathrm{B}]$. The "order" seen therefore depends on the conditions — use comparable amounts of the reactants and the true second order reappears.
The second classic example is the inversion of cane sugar:
$$\mathrm{C_{12}H_{22}O_{11}+H_{2}O\xrightarrow{H^{+}}}$$ $$\mathrm{C_{6}H_{12}O_{6}\,(glucose)+C_{6}H_{12}O_{6}\,(fructose)}.$$Sucrose solution rotates plane-polarised light to the right; the equimolar mixture of glucose and fructose rotates it to the left, because fructose is the stronger laevorotatory sugar. So the rotation falls from a positive value $r_{0}$ through zero to a negative final value $r_{\infty}$, and the "inverted" sign gives the reaction its name.
In the pressure-gauge lab choose $\mathrm{SO_{2}Cl_{2}}$ with $p_{0}=0.50\ \mathrm{atm}$ and $k=2.0\times10^{-3}\ \mathrm{s^{-1}}$. What total pressure does the gauge show at the moment half of the $\mathrm{SO_{2}Cl_{2}}$ has decomposed?
For the first-order gas reaction $\mathrm{A(g)\rightarrow2B(g)+C(g)}$ at constant volume and temperature, the initial pressure of pure A is $p_{0}$ and the total pressure at time $t$ is $p_{t}$. The partial pressure of A at time $t$ is
Half-life and the order of a reaction
We now have two half-life formulas: $t_{1/2}=[\mathrm{A}]_{0}/2k$ for zero order (proportional to $[\mathrm{A}]_{0}$) and $t_{1/2}=0.693/k$ for first order (independent of $[\mathrm{A}]_{0}$). The pattern continues to higher orders. For a reaction of order $n$, a larger initial concentration makes the reaction faster by a factor $[\mathrm{A}]_{0}^{n}$ while there is $[\mathrm{A}]_{0}$ times more to get through, so the time to use up a fixed fraction scales as $[\mathrm{A}]_{0}/[\mathrm{A}]_{0}^{n}$:
For a reaction $\mathrm{A}\rightarrow\text{products}$ of order $n$ (one reactant, or all reactants at the same initial concentration):
$$t_{1/2}\propto\frac{1}{[\mathrm{A}]_{0}^{\,n-1}}=[\mathrm{A}]_{0}^{\,1-n}.$$| Order | 0 | 1 | 2 | 3 |
|---|---|---|---|---|
| $t_{1/2}$ varies as | $[\mathrm{A}]_{0}$ | independent | $1/[\mathrm{A}]_{0}$ | $1/[\mathrm{A}]_{0}^{2}$ |
Half-life method for the order: measure $t_{1/2}$ at two initial concentrations; then
$$\frac{(t_{1/2})_{1}}{(t_{1/2})_{2}}=\left(\frac{[\mathrm{A}]_{0,2}}{[\mathrm{A}]_{0,1}}\right)^{n-1},$$ $$n=1+\frac{\log\left[(t_{1/2})_{1}/(t_{1/2})_{2}\right]}{\log\left([\mathrm{A}]_{0,2}/[\mathrm{A}]_{0,1}\right)}.$$- Constant differences in equal time intervals ($[\mathrm{A}]$ falls by the same amount each interval) → zero order; $[\mathrm{A}]$–$t$ is straight.
- Constant ratios in equal time intervals ($[\mathrm{A}]$ falls by the same fraction each interval) → first order; $\ln[\mathrm{A}]$–$t$ is straight, $k=\dfrac{2.303}{\Delta t}\log(\text{ratio})$.
- Half-lives: growing with $[\mathrm{A}]_{0}$ → zero; constant → first; shrinking as $1/[\mathrm{A}]_{0}$ → second (Result 8.9).
- Then use the right formula: Result 8.5 or 8.6. Convert "x% complete" into "(100 − x)% left", and keep $k$ and $t$ in the same time unit.
Not in the NMC NEET (UG) syllabus, which names only the integrated forms of zero- and first-order reactions; no exercise, Exam-corner problem or quiz question of this course depends on this box. The half-life trend of Result 8.9 is all you need for the exam. For interest: integrating $-d[\mathrm{A}]/dt=k[\mathrm{A}]^{2}$ gives $\dfrac{1}{[\mathrm{A}]}-\dfrac{1}{[\mathrm{A}]_{0}}=kt$, so a graph of $1/[\mathrm{A}]$ against $t$ is a straight line of slope $k$, and $t_{1/2}=\dfrac{1}{k[\mathrm{A}]_{0}}$ — the $1/[\mathrm{A}]_{0}$ dependence of the table above.
1. ln versus log. $k=\dfrac{1}{t}\ln\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}=\dfrac{2.303}{t}\log\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}$. Writing $\dfrac{1}{t}\log$ gives an answer $2.303$ times too small, and that wrong value is usually one of the options.
2. "Completed" versus "left". "$x\%$ complete" leaves $(100-x)\%$; the ratio in the formula is $\dfrac{100}{100-x}$, not $\dfrac{100}{x}$. Know the first-order landmarks: $t_{75\%}=2t_{1/2}$, $t_{87.5\%}=3t_{1/2}$, $t_{99\%}\approx6.6\,t_{1/2}$, $t_{99.9\%}\approx10\,t_{1/2}$.
3. The half-life formula of the wrong order. $t_{1/2}=0.693/k$ is for first order only and does not depend on $[\mathrm{A}]_{0}$. A zero-order half-life is $[\mathrm{A}]_{0}/2k$, proportional to $[\mathrm{A}]_{0}$, and a zero-order reaction is over at $2t_{1/2}$; a first-order reaction is never quite over.
4. Which graph is straight, and what is its slope? Zero order: $[\mathrm{A}]$ against $t$, slope $-k$. First order: $\ln[\mathrm{A}]$ against $t$, slope $-k$; $\log[\mathrm{A}]$ against $t$, slope $-k/2.303$; $\log\dfrac{[\mathrm{A}]_{0}}{[\mathrm{A}]}$ against $t$, slope $+k/2.303$ through the origin. Half-life against $[\mathrm{A}]_{0}$: horizontal for first order, a line through the origin for zero order.
5. Total pressure is not $p_{\mathrm{A}}$. Convert first: $p_{\mathrm{A}}=\dfrac{np_{0}-p_{t}}{n-1}$, i.e. $2p_{0}-p_{t}$ for $\mathrm{A\rightarrow B+C}$ (Result 8.8). For $\mathrm{2N_{2}O_{5}\rightarrow4NO_{2}+O_{2}}$, $n=2.5$ per $\mathrm{N_{2}O_{5}}$.
6. Pseudo-first order: molecularity 2, order 1. The acid hydrolysis of ethyl acetate and the inversion of cane sugar involve water, but water is in such excess that it drops out of the rate law. Sucrose solution is dextrorotatory and the product mixture laevorotatory — not the other way round. And keep $k$ and $t$ in the same time unit: $\mathrm{min^{-1}}$ with minutes.
For a reaction $\mathrm{A}\rightarrow\text{products}$, the half-life halves when the initial concentration of A is doubled. The order of the reaction is
Exercises
Take $\ln2=0.693$ and $\ln x=2.303\log x$. "First order" means first order in the reactant named; gas reactions take place at constant volume and temperature.
- 1 A zero-order reaction has $k=1.5\times10^{-3}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ and $[\mathrm{A}]_{0}=0.30\ \mathrm{mol\,L^{-1}}$. Find $[\mathrm{A}]$ after $120\ \mathrm{s}$.
- 2 For the reaction in part 1, find the half-life.
- 3 For the reaction in part 1, find the time for complete reaction.
- 4 A graph of $[\mathrm{A}]$ (in $\mathrm{mol\,L^{-1}}$) against $t$ (in min) is a straight line with slope $-4.0\times10^{-3}$ and intercept $0.60$. State the order and find $k$ and $t_{1/2}$.
- 5 Explain, in terms of a metal surface, why the decomposition of a gas on the surface can be zero order at high pressure and first order at low pressure.
- 6 HI decomposes on a gold surface by zero-order kinetics; $[\mathrm{HI}]$ falls from $0.40$ to $0.25\ \mathrm{mol\,L^{-1}}$ in $50$ min. How much longer will it take to fall to $0.10\ \mathrm{mol\,L^{-1}}$?
- 7 A zero-order reaction has $t_{1/2}=40$ min when $[\mathrm{A}]_{0}=0.20\ \mathrm{mol\,L^{-1}}$. Find $t_{1/2}$ when $[\mathrm{A}]_{0}=0.50\ \mathrm{mol\,L^{-1}}$.
- 8 What fraction of the reactant remains in a zero-order reaction at three-quarters of the time needed for complete reaction? Compare with a first-order reaction at three half-lives.
- 1 Find the half-life of a first-order reaction with $k=5.0\times10^{-3}\ \mathrm{s^{-1}}$.
- 2 A first-order reaction has $t_{1/2}=30$ min. Find $k$.
- 3 What percentage of a first-order reactant remains after five half-lives?
- 4 For a first-order reaction with $k=0.0693\ \mathrm{min^{-1}}$, find the time for $90\%$ completion.
- 5 A first-order reaction is $40\%$ complete in $50$ min. Find $k$ and $t_{1/2}$.
- 6 How long does a first-order reaction with $t_{1/2}=12$ min take to be $87.5\%$ complete?
- 7 Show that for a first-order reaction $t_{99\%}=2\,t_{90\%}$.
- 8 In a first-order reaction $[\mathrm{A}]$ falls from $0.80$ to $0.20\ \mathrm{mol\,L^{-1}}$ in $40$ min. How long does it take to fall from $0.40$ to $0.10\ \mathrm{mol\,L^{-1}}$? What is $t_{1/2}$?
- 9 For a first-order reaction with $k=2.0\times10^{-2}\ \mathrm{s^{-1}}$, find $[\mathrm{A}]/[\mathrm{A}]_{0}$ after $100\ \mathrm{s}$.
- 1 $\mathrm{2N_{2}O_{5}(g)\rightarrow4NO_{2}(g)+O_{2}(g)}$ is first order. Pure $\mathrm{N_{2}O_{5}}$ at $0.40\ \mathrm{atm}$ gives a total pressure of $0.55\ \mathrm{atm}$ after $20$ min. Find $p_{\mathrm{N_{2}O_{5}}}$ at that time and $k$.
- 2 In part 1, what is the total pressure when the reaction is complete?
- 3 For the first-order reaction $\mathrm{A(g)\rightarrow2B(g)+C(g)}$, $p_{0}=0.40\ \mathrm{atm}$ and the total pressure after $10$ min is $0.48\ \mathrm{atm}$. After how long will the total pressure be $0.80\ \mathrm{atm}$?
- 4 Equal portions of a decomposing $\mathrm{H_{2}O_{2}}$ solution need $25.0\ \mathrm{mL}$ of $\mathrm{KMnO_{4}}$ at $t=0$ and $15.0\ \mathrm{mL}$ at $t=20$ min. What volume will be needed at $t=40$ min?
- 5 In the acid hydrolysis of an ester, titres of NaOH are $V_{0}=20.0\ \mathrm{mL}$, $V_{30\ \text{min}}=30.0\ \mathrm{mL}$ and $V_{\infty}=50.0\ \mathrm{mL}$. Find the rate constant and the half-life.
- 6 During the inversion of cane sugar the rotation is $+24.0^{\circ}$ at the start, $+8.0^{\circ}$ after $60$ min and $-8.0^{\circ}$ at the end. Find the rate constant.
- 7 The acid hydrolysis of a dilute ester is first order in ester, yet the true rate law is $r=k'[\mathrm{ester}][\mathrm{H_{2}O}]$. What would you observe if the ester and water were both $1\ \mathrm{mol\,L^{-1}}$ in an inert solvent? By what factor does the initial rate change if the ester concentration is doubled in water?
- 8 State the conditions under which the total-pressure method of part 1 is valid.
- 1 For $\mathrm{A}\rightarrow$ products, $t_{1/2}=200\ \mathrm{s}$ at $[\mathrm{A}]_{0}=0.10$ and $100\ \mathrm{s}$ at $[\mathrm{A}]_{0}=0.20\ \mathrm{mol\,L^{-1}}$. Find the order.
- 2 For another reaction $t_{1/2}=60$ min at $[\mathrm{A}]_{0}=0.50$ and $30$ min at $0.25\ \mathrm{mol\,L^{-1}}$. Find the order and $k$.
- 3 Data: $t$ = 0, 10, 20, 30 min; $[\mathrm{A}]$ = 0.400, 0.300, 0.225, 0.169 $\mathrm{mol\,L^{-1}}$. Find the order and $k$.
- 4 Data: $t$ = 0, 10, 20 min; $[\mathrm{A}]$ = 0.400, 0.340, 0.280 $\mathrm{mol\,L^{-1}}$. Find the order and $k$, and predict $[\mathrm{A}]$ at 50 min.
- 5 Two first-order reactions with half-lives of 10 min and 20 min start with the same concentration. Find the ratio of their remaining concentrations after 60 min.
- 6 Show that for a first-order reaction the time for the concentration to fall to $\tfrac1m$ of its initial value is $t_{1/2}\,\dfrac{\log m}{\log2}$, and use it to find the time for $99.9\%$ completion when $t_{1/2}=5.0$ min.
- 7 A first-order reaction has $k=0.10\ \mathrm{min^{-1}}$. After how long has its rate fallen to one tenth of the initial rate?
- 8 For the first-order reaction $\mathrm{A(g)\rightarrow B(g)+C(g)}$ with $k=2.31\times10^{-2}\ \mathrm{min^{-1}}$, after how long is the total pressure $1.5$ times the initial pressure?
Six original problems in the NEET style — one correct option each, marked $+4$ / $-1$ / $0$. Take $\ln2=0.693$ and $\ln x=2.303\log x$. Aim for about a minute per problem; decide the order from the units or the graph before you choose a formula.
E1. NEET · MCQ The rate constant of a first-order reaction is $2.303\times10^{-2}\ \mathrm{s^{-1}}$. The time taken for the concentration of the reactant to fall to one tenth of its initial value is (A) $43.4\ \mathrm{s}$ (B) $100\ \mathrm{s}$ (C) $230\ \mathrm{s}$ (D) $30.1\ \mathrm{s}$
E2. NEET · MCQ Given below are two statements. Statement I: The half-life of a zero-order reaction is directly proportional to the initial concentration of the reactant. Statement II: For a first-order reaction, the time required for $75\%$ completion is twice its half-life. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true
E3. NEET · MCQ Assertion (A): The acid-catalysed inversion of cane sugar is a pseudo-first-order reaction. Reason (R): During the inversion, the optical rotation of the solution changes from laevorotatory to dextrorotatory. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E4. NEET · MCQ For a first-order reaction $\mathrm{A}\rightarrow$ products with rate constant $k$, match each plot in List-I with its description in List-II.
List-I: P. $\ln[\mathrm{A}]$ against $t$ · Q. $\log[\mathrm{A}]$ against $t$ · R. $t_{1/2}$ against $[\mathrm{A}]_{0}$ · S. rate against $[\mathrm{A}]$
List-II: I. straight line of slope $-k/2.303$ · II. straight line through the origin of slope $k$ · III. straight line of slope $-k$ · IV. straight line parallel to the concentration axis
Choose the correct answer. (A) P-I, Q-III, R-IV, S-II (B) P-III, Q-I, R-II, S-IV (C) P-II, Q-I, R-IV, S-III (D) P-III, Q-I, R-IV, S-II
E5. NEET · MCQ How many of the following are characteristics of a first-order reaction? (i) its half-life does not depend on the initial concentration (ii) its rate constant has the units $\mathrm{s^{-1}}$ (or another reciprocal time) (iii) a graph of $[\mathrm{A}]$ against $t$ is a straight line (iv) a graph of $\log[\mathrm{A}]$ against $t$ is a straight line (v) the reaction is complete after two half-lives (vi) the same fraction of the reactant is used up in equal intervals of time (A) $3$ (B) $4$ (C) $5$ (D) $2$
E6. NEET · MCQ The graph shows the concentration of the reactant against time for the decomposition $\mathrm{A}\rightarrow$ products at constant temperature. The order, the rate constant and the half-life (for $[\mathrm{A}]_{0}=0.40\ \mathrm{mol\,L^{-1}}$) are (A) first order, $1.73\times10^{-2}\ \mathrm{min^{-1}}$, $40\ \mathrm{min}$ (B) zero order, $1.0\times10^{-2}\ \mathrm{mol\,L^{-1}\,min^{-1}}$, $40\ \mathrm{min}$ (C) first order, $1.0\times10^{-2}\ \mathrm{min^{-1}}$, $69.3\ \mathrm{min}$ (D) zero order, $1.0\times10^{-2}\ \mathrm{mol\,L^{-1}\,min^{-1}}$, $20\ \mathrm{min}$
Research question. Does the fading of a dye in alkaline solution follow first-order (pseudo-first-order) kinetics, and how does its half-life change with the concentration of the alkali?
Why it matters. Medicine regulators in every country require a shelf life for each drug, usually the time for 10% of the active ingredient to decompose, $t_{90}$ (for first-order loss $t_{90}=0.105/k$). Water-treatment engineers model the decay of chlorine and of pollutants with the same first-order laws, and food scientists use them for vitamin loss during storage. Measuring a rate constant from colour is the cheapest version of these industrial stability studies.
What to do.
- Under supervision, mix a very dilute solution of a violet dye such as crystal violet with dilute sodium hydroxide in large excess (so that $[\mathrm{OH^{-}}]$ stays constant — a pseudo-first-order reaction). The violet colour fades as the dye reacts.
- Place the cuvette or a small glass vial in front of a white phone screen or sheet and photograph it every 30 s; a free colour-picker or "colorimeter" app gives the intensity of the colour, which is proportional to the dye concentration over a modest range (calibrate with two or three dilutions of the dye).
- Plot $\ln(\text{intensity})$ against time. Is it a straight line? Find $k_{\text{obs}}$ from its slope and the half-life $0.693/k_{\text{obs}}$.
- Repeat with the alkali concentration halved and doubled. Plot $k_{\text{obs}}$ against $[\mathrm{OH^{-}}]$: a straight line through the origin means $k_{\text{obs}}=k'[\mathrm{OH^{-}}]$, i.e. the true rate law is first order in each reactant.
- Predict the time for 90% fading at one alkali concentration and check it.
Tools: Phone camera with a colour-picker app (or a cheap colorimeter), glass vials, measuring cylinders, stopwatch, spreadsheet for the log plots.
Hand in: Calibration data, the $\ln(\text{intensity})$–$t$ graphs, a table of $k_{\text{obs}}$ and $t_{1/2}$ at each alkali concentration, the deduced true rate law, and a paragraph on why the reaction looks first order.
Going further. Repeat at a warmer temperature (a water bath) and estimate how much $k$ increases — the subject of Section 8.3.
🧪 Self-check quiz
Q1. For a first-order reaction, a graph of $\log[\mathrm{A}]$ against time has a slope of
Q2. The half-life of a zero-order reaction with initial concentration $[\mathrm{A}]_{0}$ and rate constant $k$ is
Q3. Which of these is a pseudo-first-order reaction?
Q4. A first-order reaction has a half-life of $10\ \mathrm{min}$. Starting with $64\ \mathrm{g}$ of the reactant, how much is left after one hour?
Q5. For a zero-order reaction, which plot is a straight line with a positive slope?