16.1 Haloalkanes and Haloarenes: Preparation, the C–X Bond and Properties
Put a halogen on a carbon chain or a benzene ring and you get a polar, reactive $\mathrm{C{-}X}$ bond. This section classifies and names haloalkanes and haloarenes, explains the polarity, length and strength of the $\mathrm{C{-}X}$ bond, shows how both families are made and why their physical properties follow the trends they do.
Trichloromethane once put patients to sleep in operating theatres; a chlorofluorocarbon kept refrigerators cold for half a century; a polychlorinated insecticide saved millions of lives from malaria and then turned up in the fat of penguins in Antarctica. The halothane used in anaesthesia, the PVC of a water pipe and many medicines contain a carbon–halogen bond. In the laboratory, an alkyl halide is the most useful starting point in organic synthesis: almost every functional group — alcohols, ethers, amines, nitriles, alkenes, Grignard reagents — can be reached from it in one step.
All this comes from one bond. The halogen is more electronegative than carbon, so the $\mathrm{C{-}X}$ bond is polar and the carbon carries a partial positive charge that electron-rich reagents can attack. How strongly this happens depends on which halogen it is and on what kind of carbon carries it — an $sp^{3}$ carbon of a chain or an $sp^{2}$ carbon of a benzene ring. In this section we classify and name these compounds, study the $\mathrm{C{-}X}$ bond, learn how both families are prepared and explain their boiling points, densities, solubilities and dipole moments. Their reactions and mechanisms follow in Section 16.2. You will need electronegativity and dipole moments from Section 3.2, hybridisation and resonance from Section 3.3, and IUPAC naming from Section 14.1.
Classification and nomenclature
Replacing one or more hydrogen atoms of a hydrocarbon by halogen atoms gives a halogen derivative. Two families matter, and the difference between them is the hybridisation of the carbon that carries the halogen.
A haloalkane (alkyl halide), $\mathrm{R{-}X}$, has the halogen atom X (F, Cl, Br or I) bonded to an $sp^{3}$-hybridised carbon of an alkyl group; for one halogen on an open chain the general formula is $\mathrm{C_{n}H_{2n+1}X}$. A haloarene (aryl halide), $\mathrm{Ar{-}X}$, has the halogen bonded directly to an $sp^{2}$-hybridised carbon of an aromatic ring, as in chlorobenzene $\mathrm{C_{6}H_{5}Cl}$.
Compounds are mono-, di-, tri- or polyhalogen compounds according to the number of halogen atoms.
Within the monohalogen compounds a finer classification decides most of the chemistry of Section 16.2.
- Alkyl halides $\mathrm{C(sp^{3}){-}X}$ are primary ($1^{\circ}$), secondary ($2^{\circ}$) or tertiary ($3^{\circ}$) when the carbon carrying X is bonded to one, two or three other carbons: $\mathrm{CH_{3}CH_{2}Br}$ ($1^{\circ}$), $\mathrm{(CH_{3})_{2}CHBr}$ ($2^{\circ}$), $\mathrm{(CH_{3})_{3}CBr}$ ($3^{\circ}$).
- Allylic halides: X on an $sp^{3}$ carbon next to a $\mathrm{C{=}C}$, e.g. 3-chloropropene $\mathrm{CH_{2}{=}CHCH_{2}Cl}$. Benzylic halides: X on an $sp^{3}$ carbon attached to an aromatic ring, e.g. $\mathrm{C_{6}H_{5}CH_{2}Cl}$.
- Vinylic halides: X directly on an $sp^{2}$ carbon of a $\mathrm{C{=}C}$, e.g. chloroethene $\mathrm{CH_{2}{=}CHCl}$. Aryl halides: X directly on a ring carbon.
- Dihalides: a gem-dihalide (alkylidene halide) has both halogens on the same carbon, $\mathrm{CH_{3}CHCl_{2}}$; a vic-dihalide (alkylene dihalide) has them on adjacent carbons, $\mathrm{ClCH_{2}CH_{2}Cl}$.
Naming. In IUPAC names the halogen is always a prefix — fluoro, chloro, bromo, iodo — with a locant, and the compound is named as a substituted alkane (haloalkane) or benzene (haloarene). Choose the longest chain containing the carbon that carries the halogen; number it to give the lowest locants to the substituents as a set (multiple bonds take priority for low numbers); list prefixes alphabetically. Common names use the alkyl group plus "halide": methyl chloride, isopropyl bromide, tert-butyl chloride, allyl bromide, benzyl chloride, vinyl chloride. For disubstituted benzenes the prefixes o-, m-, p- of common names correspond to 1,2-, 1,3- and 1,4- in IUPAC names.
| Structure | Common name | IUPAC name | Class |
|---|---|---|---|
| $\mathrm{CH_{3}CH_{2}CH(Cl)CH_{3}}$ | sec-butyl chloride | 2-chlorobutane | $2^{\circ}$ |
| $\mathrm{(CH_{3})_{2}CHCH_{2}Cl}$ | isobutyl chloride | 1-chloro-2-methylpropane | $1^{\circ}$ |
| $\mathrm{(CH_{3})_{3}CCH_{2}Br}$ | neopentyl bromide | 1-bromo-2,2-dimethylpropane | $1^{\circ}$ |
| $\mathrm{CH_{2}{=}CHCH_{2}Br}$ | allyl bromide | 3-bromopropene | allylic |
| $\mathrm{C_{6}H_{5}CH_{2}Cl}$ | benzyl chloride | (chloromethyl)benzene | benzylic |
| $\mathrm{C_{6}H_{5}CHCl_{2}}$ | benzal chloride | (dichloromethyl)benzene | gem, benzylic |
| $\mathrm{CHCl_{3}}$, $\mathrm{CHI_{3}}$, $\mathrm{CCl_{4}}$ | chloroform, iodoform, carbon tetrachloride | trichloromethane, triiodomethane, tetrachloromethane | polyhalogen |
| $\mathrm{CH_{3}C_{6}H_{4}Cl}$ (Cl para to $\mathrm{CH_{3}}$) | p-chlorotoluene | 1-chloro-4-methylbenzene | aryl |
In which compound is the halogen bonded to an $sp^{2}$-hybridised carbon?
Nature of the C–X bond
Every halogen is more electronegative than carbon (Pauling values: C 2.55, I 2.66, Br 2.96, Cl 3.16, F 3.98), so the shared pair of the $\mathrm{C{-}X}$ bond is pulled towards X. The carbon carries a partial positive charge $\delta+$ and the halogen a partial negative charge $\delta-$. Going down the group the halogen atom becomes larger, so its orbitals overlap less effectively with the small carbon orbital: the bond becomes longer and weaker.
| Bond in $\mathrm{CH_{3}{-}X}$ | C–F | C–Cl | C–Br | C–I |
|---|---|---|---|---|
| bond length / pm | 139 | 178 | 193 | 214 |
| bond enthalpy / $\mathrm{kJ\,mol^{-1}}$ | 452 | 351 | 293 | 234 |
| dipole moment of $\mathrm{CH_{3}X}$ / D | 1.847 | 1.860 | 1.830 | 1.636 |
- Polarity (electronegativity difference): $\mathrm{C{-}F}\gt\mathrm{C{-}Cl}\gt\mathrm{C{-}Br}\gt\mathrm{C{-}I}$.
- Bond length: $\mathrm{C{-}F}\lt\mathrm{C{-}Cl}\lt\mathrm{C{-}Br}\lt\mathrm{C{-}I}$; bond enthalpy: $\mathrm{C{-}F}\gt\mathrm{C{-}Cl}\gt\mathrm{C{-}Br}\gt\mathrm{C{-}I}$.
- Ease of breaking the C–X bond, and so the reactivity of haloalkanes in substitution: $\mathrm{R{-}I}\gt\mathrm{R{-}Br}\gt\mathrm{R{-}Cl}\gt\mathrm{R{-}F}$. Bond strength, not polarity, decides this order.
- Dipole moment $\mu=q\times d$ depends on charge and length: $\mathrm{CH_{3}Cl}\gt\mathrm{CH_{3}F}\gt\mathrm{CH_{3}Br}\gt\mathrm{CH_{3}I}$. Fluorine gives the largest partial charge, but the C–F bond is so short that $\mathrm{CH_{3}F}$ falls just below $\mathrm{CH_{3}Cl}$.
The partial charge can be estimated from the dipole moment. If charges $\pm\delta e$ sit a distance $d$ apart, then $\mu=\delta e\,d$, so $\delta=\mu/(e\,d)$. With $1\ \mathrm{D}=3.336\times10^{-30}\ \mathrm{C\,m}$ this gives the "fractional ionic character" of the bond. Interactive 1 computes it for each methyl halide.
Haloarenes are different. In chlorobenzene a lone pair on chlorine is in conjugation with the $\pi$ electrons of the ring. Five structures contribute to the resonance hybrid (figure below); in three of them the C–Cl bond is a double bond.
Compared with a haloalkane, the C–X bond of an aryl (or vinylic) halide is shorter, stronger and much less reactive towards nucleophilic substitution, for four reasons:
- Resonance. Delocalisation of a halogen lone pair gives the C–X bond partial double-bond character: C–Cl is about $169\ \mathrm{pm}$ in chlorobenzene against about $177\ \mathrm{pm}$ in chloromethane.
- Hybridisation. The carbon is $sp^{2}$ (33 % s character) rather than $sp^{3}$ (25 %). It is more electronegative, holds the bonding pair more tightly and forms a shorter, stronger bond.
- Unstable cation. Heterolysis would give a phenyl cation whose empty $sp^{2}$ orbital lies in the plane of the ring, at right angles to the $\pi$ system — it gets no resonance help, so the SN1 path is closed.
- Repulsion. The electron-rich ring repels an approaching nucleophile, and the ring blocks attack from the back of the C–X bond, so the SN2 path is closed too.
The same delocalisation lowers the dipole moment: chlorobenzene about $1.7\ \mathrm{D}$, chlorocyclohexane about $2.2\ \mathrm{D}$.
Fluorine is by far the most electronegative halogen. Which methyl halide has the largest dipole moment?
Which statement about the C–X bond in haloalkanes $\mathrm{CH_{3}X}$ is correct?
Methods of preparation
The figure maps the main routes. Haloalkanes are usually made from alcohols, which are cheap and give a single, predictable product; halogenation of alkanes gives mixtures and is used only when the mixture can be separated or when all hydrogens are equivalent.
1. From alcohols — replacing OH by X. The OH group is a poor leaving group; each reagent first turns it into a better one (water, or an oxygen bonded to P or S).
- Hydrogen halides. $\mathrm{R{-}OH+HX\rightarrow R{-}X+H_{2}O}$. Tertiary alcohols react with concentrated HCl at room temperature just by shaking. Primary and secondary alcohols need HCl with anhydrous $\mathrm{ZnCl_{2}}$ (a Lewis acid that binds the OH oxygen) and heat. HBr is often made in the flask from $\mathrm{NaBr}$ and concentrated $\mathrm{H_{2}SO_{4}}$; HI from $\mathrm{KI}$ and 95 % $\mathrm{H_{3}PO_{4}}$ — not $\mathrm{H_{2}SO_{4}}$, which would oxidise HI to $\mathrm{I_{2}}$.
- Phosphorus halides. $\mathrm{3R{-}OH+PCl_{3}\rightarrow 3R{-}Cl+H_{3}PO_{3}}$ and $\mathrm{R{-}OH+PCl_{5}\rightarrow R{-}Cl+POCl_{3}+HCl}$. $\mathrm{PBr_{3}}$ and $\mathrm{PI_{3}}$ are generated in situ from red phosphorus with bromine or iodine.
- Thionyl chloride (usually with pyridine to take up HCl): $\mathrm{R{-}OH+SOCl_{2}}$ $\rightarrow$ $\mathrm{R{-}Cl+SO_{2}\uparrow+HCl\uparrow}$. Both by-products are gases that escape, leaving the alkyl chloride nearly pure — the preferred laboratory method.
For the reaction $\mathrm{R{-}OH+HX\rightarrow R{-}X+H_{2}O}$:
- order of reactivity of alcohols: $3^{\circ}\gt2^{\circ}\gt1^{\circ}$ (the more stable the carbocation that can form, the faster);
- order of reactivity of hydrogen halides: $\mathrm{HI\gt HBr\gt HCl}$ (the stronger acid protonates the OH better, and $\mathrm{I^{-}}$ is the best nucleophile).
Phenols cannot be converted to aryl halides by HX, $\mathrm{PX_{3}}$ or $\mathrm{SOCl_{2}}$ in useful yield: the C–O bond of phenol has partial double-bond character (resonance, as for C–Cl in Rule 16.2) and an aryl cation cannot form.
2. From hydrocarbons. Alkanes react with $\mathrm{Cl_{2}}$ or $\mathrm{Br_{2}}$ in light or heat by a free-radical chain (Section 15.1), giving a mixture of isomeric monohalides plus polyhalides. Alkenes add HX across the double bond following Markovnikov's rule (H to the carbon that already has more H); with HBr only, in the presence of peroxide, the addition is anti-Markovnikov. Alkenes add $\mathrm{Br_{2}}$ or $\mathrm{Cl_{2}}$ to give vic-dihalides (Section 15.2):
$$\mathrm{CH_{3}CH{=}CH_{2}+HBr\rightarrow CH_{3}CHBrCH_{3}}\qquad\mathrm{CH_{3}CH{=}CH_{2}+HBr\xrightarrow{\text{peroxide}}CH_{3}CH_{2}CH_{2}Br}$$3. Halogen exchange. Iodides and fluorides are awkward to make directly, so they are made from chlorides or bromides.
The Finkelstein reaction converts an alkyl chloride or bromide into the iodide with sodium iodide in dry acetone: $\mathrm{R{-}Cl+NaI\xrightarrow{\text{dry acetone}}R{-}I+NaCl\downarrow}$. NaI dissolves in acetone but NaCl and NaBr do not; the precipitate removes a product and pulls the equilibrium forward (Le Chatelier's principle).
The Swarts reaction makes alkyl fluorides by heating an alkyl chloride or bromide with a metal fluoride such as $\mathrm{AgF}$, $\mathrm{Hg_{2}F_{2}}$, $\mathrm{CoF_{2}}$ or $\mathrm{SbF_{3}}$: $\mathrm{CH_{3}Br+AgF\rightarrow CH_{3}F+AgBr}$.
4. Haloarenes. (a) Electrophilic substitution (Section 15.4): an arene reacts with chlorine or bromine in the dark, in the cold, with iron or a Lewis acid ($\mathrm{FeCl_{3}}$, $\mathrm{FeBr_{3}}$) that generates the electrophile $\mathrm{X^{+}}$:
$$\mathrm{C_{6}H_{6}+Cl_{2}\xrightarrow{\text{anhyd. }FeCl_{3}}C_{6}H_{5}Cl+HCl}$$Toluene gives a mixture of 2- and 4-chlorotoluene ($\mathrm{CH_{3}}$ is an ortho/para director); the two isomers boil only about $3\ \mathrm{K}$ apart, so they are hard to separate. Iodination is reversible (the HI formed reduces $\mathrm{C_{6}H_{5}I}$ back), so an oxidising agent such as $\mathrm{HNO_{3}}$ or $\mathrm{HIO_{4}}$ is added to destroy HI; direct fluorination is too violent to control. In light and heat, however, chlorine attacks the side chain of toluene by free radicals, giving benzyl chloride, then $\mathrm{C_{6}H_{5}CHCl_{2}}$ and $\mathrm{C_{6}H_{5}CCl_{3}}$. (b) From diazonium salts (the Sandmeyer reaction, Section 18.2): a primary aromatic amine is diazotised with $\mathrm{NaNO_{2}/HCl}$ at $273$–$278\ \mathrm{K}$, and the diazonium group is replaced by Cl or Br with the copper(I) halide, or by I simply with KI:
$$\mathrm{C_{6}H_{5}N_{2}^{+}Cl^{-}\xrightarrow{CuCl/HCl}C_{6}H_{5}Cl+N_{2}}\qquad\mathrm{C_{6}H_{5}N_{2}^{+}Cl^{-}+KI\rightarrow C_{6}H_{5}I+KCl+N_{2}}$$This route puts the halogen exactly where the $\mathrm{NH_{2}}$ group was, so it gives a single pure isomer.
Which method gives the purest 1-iodobutane from 1-bromobutane?
Physical properties
Methyl chloride, methyl bromide, ethyl chloride and some chlorofluoromethanes are gases at room temperature; higher members are colourless liquids or solids. Many have a sweetish smell. Bromides and iodides slowly turn brown in light as the weak C–X bond breaks and free halogen forms.
Boiling points. Molecules of a haloalkane attract each other more strongly than those of the parent alkane: there are dipole–dipole attractions, and the large, easily polarised halogen atom adds strong London (dispersion) forces. So:
- Boiling point is higher than that of the parent alkane. For the same alkyl group: $\mathrm{R{-}I\gt R{-}Br\gt R{-}Cl\gt R{-}F}$ (size and polarisability of X). For the same halogen it rises with chain length. Among isomers it falls with branching (a more spherical molecule has less surface contact): 1-bromobutane ($375\ \mathrm{K}$) $\gt$ 2-bromobutane ($364\ \mathrm{K}$) $\gt$ 2-bromo-2-methylpropane ($346\ \mathrm{K}$).
- Melting points of dihalobenzenes: the para isomer melts far higher than ortho and meta (1,4-dichlorobenzene $327\ \mathrm{K}$; 1,2- $256\ \mathrm{K}$; 1,3- $248\ \mathrm{K}$) because its symmetrical molecules pack better in the crystal. Their boiling points are close together ($446$–$453\ \mathrm{K}$).
- Density rises with the number and atomic mass of the halogens: bromides, iodides and polychlorides are denser than water ($\mathrm{CH_{2}Cl_{2}}$ $1.34$, $\mathrm{CHCl_{3}}$ $1.49$, $\mathrm{CCl_{4}}$ $1.59\ \mathrm{g\,mL^{-1}}$); for one halogen it falls as the chain grows.
- Solubility: only very slightly soluble in water — breaking water's hydrogen bonds costs more energy than the weaker haloalkane–water attractions return — but freely soluble in organic solvents.
Dipole moments of polyhalides. Bond dipoles add as vectors: $\mu=\sqrt{\mu_{1}^{2}+\mu_{2}^{2}+2\mu_{1}\mu_{2}\cos\theta}$. For two equal C–Cl dipoles on a benzene ring, $\theta$ is $60^{\circ}$, $120^{\circ}$ or $180^{\circ}$, giving $\sqrt3\,\mu_{1}$, $\mu_{1}$ and $0$. The same idea explains why $\mathrm{CCl_{4}}$ and trans-1,2-dichloroethene are non-polar while $\mathrm{CHCl_{3}}$ and the cis isomer are polar.
1-Bromopropane ($M=123$) is much heavier than 1-chlorobutane ($M=92.5$). Which boils higher?
1. Allylic and benzylic halides are not $sp^{2}$ halides. In $\mathrm{CH_{2}{=}CHCH_{2}Cl}$ and $\mathrm{C_{6}H_{5}CH_{2}Cl}$ the halogen sits on the $sp^{3}$ carbon next to the double bond or ring. Only vinylic ($\mathrm{CH_{2}{=}CHCl}$) and aryl ($\mathrm{C_{6}H_{5}Cl}$) halides have X on an $sp^{2}$ carbon. And $\mathrm{C_{6}H_{5}CH_{2}CH_{2}Br}$ is an ordinary $1^{\circ}$ halide, not benzylic — the Br is two carbons from the ring.
2. Largest dipole moment ≠ most polar bond. Electronegativity puts F first, but $\mu$ is charge × distance and the C–F bond is very short: $\mathrm{CH_{3}Cl\gt CH_{3}F\gt CH_{3}Br\gt CH_{3}I}$. An option written in electronegativity order is the usual distractor.
3. Reactivity follows bond strength, not polarity. $\mathrm{R{-}I\gt R{-}Br\gt R{-}Cl\gt R{-}F}$ in substitution, because the C–I bond is the weakest. Alcohols with HX: $3^{\circ}\gt2^{\circ}\gt1^{\circ}$ and $\mathrm{HI\gt HBr\gt HCl}$; $3^{\circ}$ alcohols need no $\mathrm{ZnCl_{2}}$.
4. Reagent pairs that are often swapped. Finkelstein: NaI in dry acetone → iodide. Swarts: AgF, $\mathrm{Hg_{2}F_{2}}$, $\mathrm{CoF_{2}}$ or $\mathrm{SbF_{3}}$ → fluoride. HI from KI with $\mathrm{H_{3}PO_{4}}$, never $\mathrm{H_{2}SO_{4}}$ (it oxidises HI to $\mathrm{I_{2}}$). The peroxide effect works with HBr only. One $\mathrm{PCl_{3}}$ converts three ROH; one $\mathrm{PCl_{5}}$ or one $\mathrm{SOCl_{2}}$ converts one. Phenol is not converted into chlorobenzene by HCl, $\mathrm{PCl_{5}}$ or $\mathrm{SOCl_{2}}$.
5. Ring or side chain? Toluene + $\mathrm{Cl_{2}}$ with $\mathrm{FeCl_{3}}$ in the dark substitutes the ring (o- and p-chlorotoluene); in sunlight or heat, without a catalyst, it substitutes the side chain (benzyl chloride and beyond). A pure single aryl halide comes from a diazonium salt (Sandmeyer: CuCl/HCl or CuBr/HBr; KI for iodides).
6. Physical-property slips. Branching lowers the boiling point of isomers; the para-dihalobenzene has the highest melting point (packing), though the three boiling points are close. $\mathrm{CH_{2}Cl_{2}}$, $\mathrm{CHCl_{3}}$ and $\mathrm{CCl_{4}}$ are denser than water (the lower layer), and haloalkanes are polar yet only slightly soluble in water — they cannot form hydrogen bonds with it.
Which compound has the highest boiling point?
Exercises
Atomic masses: H 1, C 12, O 16, F 19, Na 23, P 31, S 32, Cl 35.5, Br 80, Sb 122, I 127. $1\ \mathrm{D}=3.336\times10^{-30}\ \mathrm{C\,m}$, $e=1.602\times10^{-19}\ \mathrm{C}$.
- 1 Name $\mathrm{(CH_{3})_{2}CHCH_{2}Cl}$ and $\mathrm{(CH_{3})_{3}CBr}$ by the IUPAC system and classify each as $1^{\circ}$, $2^{\circ}$ or $3^{\circ}$.
- 2 Name and classify $\mathrm{CH_{3}CH{=}CHCH_{2}Br}$ and $\mathrm{BrCH{=}CHCH_{3}}$.
- 3 Name and classify $\mathrm{C_{6}H_{5}CH_{2}CH_{2}Br}$ and $\mathrm{C_{6}H_{5}CH(Br)CH_{3}}$.
- 4 Write the structures of 1-bromo-4-chlorobutane, 2-chloro-3-methylpentane and 1,3-dichlorobenzene.
- 5 Name $\mathrm{CH_{3}CHCl_{2}}$ and $\mathrm{ClCH_{2}CH_{2}Cl}$ and say which is the gem- and which the vic-dihalide.
- 6 How many structural isomers have the formula $\mathrm{C_{4}H_{9}Cl}$? How many of them are primary?
- 7 How many structural isomers have the formula $\mathrm{C_{3}H_{6}Cl_{2}}$, and how many of them are gem-dihalides?
- 8 How many isomeric trichlorobenzenes $\mathrm{C_{6}H_{3}Cl_{3}}$ are there? Name them.
- 1 Arrange C–F, C–Cl, C–Br, C–I in order of increasing bond length and explain the trend.
- 2 Arrange $\mathrm{CH_{3}F}$, $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{3}Br}$, $\mathrm{CH_{3}I}$ in order of decreasing reactivity towards substitution. Which bond property decides the order?
- 3 Explain why $\mathrm{CH_{3}Cl}$ has a larger dipole moment than $\mathrm{CH_{3}F}$.
- 4 $\mathrm{CH_{3}Br}$: $\mu=1.830\ \mathrm{D}$, C–Br $=193\ \mathrm{pm}$. Find the partial charge $\delta$ on bromine (as a fraction of $e$).
- 5 $\mathrm{CH_{3}F}$: $\mu=1.847\ \mathrm{D}$, C–F $=139\ \mathrm{pm}$. Find the percentage ionic character of the C–F bond.
- 6 The C–Cl bond is $169\ \mathrm{pm}$ in chlorobenzene and $177\ \mathrm{pm}$ in chloromethane. By what percentage is it shorter in chlorobenzene? Give two reasons.
- 7 Chloroethene, like chlorobenzene, does not undergo the substitution reactions typical of chloroethane. Explain with a resonance structure.
- 8 Of the five resonance structures of chlorobenzene, in how many does a ring carbon carry a negative charge, and at which positions?
- 1 Write balanced equations for propan-1-ol with $\mathrm{PCl_{5}}$ and for butan-2-ol with $\mathrm{SOCl_{2}}$.
- 2 Arrange butan-1-ol, butan-2-ol and 2-methylpropan-2-ol in order of increasing rate of reaction with concentrated HCl/anhydrous $\mathrm{ZnCl_{2}}$.
- 3 Why is 1-iodobutane prepared from butan-1-ol with KI and $\mathrm{H_{3}PO_{4}}$ rather than KI and $\mathrm{H_{2}SO_{4}}$?
- 4 Give the product of 2-methylpropene with HBr (a) in the dark without peroxide, (b) in the presence of benzoyl peroxide.
- 5 Write the equation for the Finkelstein reaction of 2-bromopropane and explain why it goes almost to completion.
- 6 Dichlorodifluoromethane is made by the Swarts reaction: $\mathrm{3CCl_{4}+2SbF_{3}\rightarrow 3CCl_{2}F_{2}+2SbCl_{3}}$. How many moles of $\mathrm{SbF_{3}}$ are needed per mole of $\mathrm{CCl_{2}F_{2}}$?
- 7 What mass of $\mathrm{SOCl_{2}}$ is needed to convert $7.40\ \mathrm{g}$ of butan-1-ol completely into 1-chlorobutane, and how many moles of gas are evolved?
- 8 How many structurally different monochloro products are formed when 3-methylpentane is chlorinated in light?
- 9 Give one method each for making chlorobenzene from benzene and from aniline. Why is iodobenzene not made by heating benzene with iodine alone?
- 1 Arrange $\mathrm{CH_{3}F}$, $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{3}Br}$, $\mathrm{CH_{3}I}$ in order of increasing boiling point and give the reason.
- 2 Label (1) 2-bromobutane, (2) butane, (3) 1-bromobutane, (4) 2-bromo-2-methylpropane. Write the labels in order of decreasing boiling point as a four-digit code.
- 3 Why does 1,4-dichlorobenzene melt about $70\ \mathrm{K}$ higher than 1,2-dichlorobenzene although both boil near $450\ \mathrm{K}$?
- 4 Arrange $\mathrm{CH_{2}Cl_{2}}$, $\mathrm{CHCl_{3}}$, $\mathrm{CCl_{4}}$ in order of increasing density. Which layer is chloroform in a chloroform–water mixture?
- 5 Explain why haloalkanes are only slightly soluble in water although they are polar.
- 6 Two equal bond dipoles of $1.50\ \mathrm{D}$ make an angle of $109.5^{\circ}$. Estimate the resultant dipole moment.
- 7 How many of these have zero dipole moment: $\mathrm{CCl_{4}}$, $\mathrm{CHCl_{3}}$, 1,4-dichlorobenzene, trans-1,2-dichloroethene, cis-1,2-dichloroethene, $\mathrm{CH_{2}Cl_{2}}$, 1,3,5-trichlorobenzene?
- 8 Calculate the percentage by mass of chlorine in chloroform, $\mathrm{CHCl_{3}}$.
Six original problems in the NEET style — one correct option each, marked $+4$ / $-1$ / $0$. Aim for about a minute per problem. Before reading the options, decide what kind of carbon carries the halogen ($sp^{3}$ or $sp^{2}$; $1^{\circ}$, $2^{\circ}$ or $3^{\circ}$) and which property the question is really about — bond strength, polarity, dipole moment or intermolecular forces.
E1. NEET · MCQ The graph shows the boiling points of the first five members ($n=1$ to $5$) of four homologous series: the alkanes $\mathrm{C_{n}H_{2n+2}}$ and the 1-haloalkanes $\mathrm{C_{n}H_{2n+1}Cl}$, $\mathrm{C_{n}H_{2n+1}Br}$ and $\mathrm{C_{n}H_{2n+1}I}$. Which statement is correct? (A) P is the alkyl chlorides, because chlorine is the most electronegative of the three halogens (B) P is the alkyl iodides, and the bromide with $n=3$ boils below the chloride with $n=4$ (C) P is the alkyl iodides, and the bromide with $n=3$ boils above the chloride with $n=4$ (D) S is the alkyl chlorides, because the alkanes have the largest molar masses
E2. NEET · MCQ Given below are two statements. Statement I: Chlorobenzene is converted into phenol by aqueous sodium hydroxide at room temperature. Statement II: The C–Cl bond of chlorobenzene has partial double-bond character, and the carbon carrying the chlorine is $sp^{2}$-hybridised. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true
E3. NEET · MCQ Assertion (A): 1,4-Dichlorobenzene has a much higher melting point than 1,2-dichlorobenzene. Reason (R): The dipole moment of 1,4-dichlorobenzene is zero. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E4. NEET · MCQ Match List-I (conversion) with List-II (reagent).
List-I: P. $\mathrm{CH_{3}CH_{2}OH\rightarrow CH_{3}CH_{2}Cl}$, with only gaseous by-products · Q. $\mathrm{CH_{3}CH_{2}Br\rightarrow CH_{3}CH_{2}F}$ · R. $\mathrm{C_{6}H_{5}N_{2}^{+}Cl^{-}\rightarrow C_{6}H_{5}Cl}$ · S. $\mathrm{CH_{3}CH{=}CH_{2}\rightarrow CH_{3}CH_{2}CH_{2}Br}$
List-II: I. HBr, benzoyl peroxide · II. CuCl/HCl · III. $\mathrm{SOCl_{2}}$, pyridine · IV. $\mathrm{Hg_{2}F_{2}}$, heat
Choose the correct answer. (A) P-III, Q-II, R-IV, S-I (B) P-I, Q-IV, R-II, S-III (C) P-III, Q-IV, R-I, S-II (D) P-III, Q-IV, R-II, S-I
E5. NEET · MCQ How many of the following statements are correct? (i) The boiling points follow $\mathrm{CH_{3}I\gt CH_{3}Br\gt CH_{3}Cl\gt CH_{3}F}$. (ii) Chloroform is denser than water and forms the lower layer when shaken with it. (iii) Haloalkanes dissolve freely in water because their C–X bonds are polar. (iv) The bond enthalpies follow C–F $\gt$ C–Cl $\gt$ C–Br $\gt$ C–I. (v) 2-Bromo-2-methylpropane boils at a higher temperature than 1-bromobutane. (vi) $\mathrm{CCl_{4}}$ and trans-1,2-dichloroethene both have zero dipole moment. (vii) Alkyl iodides turn brown in light because the weak C–I bond breaks and iodine is set free. (A) $3$ (B) $4$ (C) $5$ (D) $6$
E6. NEET · MCQ Which alcohol reacts fastest with concentrated hydrochloric acid containing anhydrous zinc chloride at room temperature? (A) 2-methylpropan-2-ol (B) butan-2-ol (C) butan-1-ol (D) 2-methylpropan-1-ol
Research question. Can published boiling points of haloalkanes be predicted from two numbers — the number of carbon atoms and the polarisability of the halogen?
Why it matters. Chemical engineers designing distillation columns, refrigerant blends and solvent-recovery plants need boiling points of compounds that have never been measured. Simple structure–property models (group-contribution methods) are the first tool they reach for, and their failures — branching, hydrogen bonding — are exactly the effects this section explains.
What to do.
- From an open chemical database collect boiling points of the 1-chloro-, 1-bromo- and 1-iodoalkanes with 1 to 8 carbons, and of the matching alkanes.
- For each halogen plot b.p. against $n$. Is the rise per $\mathrm{CH_{2}}$ group the same for all series? Find its average.
- Fit $T_{b}=a+b\,n+c\,\alpha_{X}$, where $\alpha_{X}$ is the polarisability of the halogen atom (look it up). Use your model to predict the b.p. of 1-iodohexane and compare with the measured value.
- Test the model on 2-bromobutane and 2-bromo-2-methylpropane. How large is the error, and in which direction?
Tools: An open chemistry database, a spreadsheet with linear regression.
Hand in: Your three plots, the fitted equation, two predictions with percentage errors, and a paragraph on why branched isomers break the model.
Going further. Add a "branching" term (for example the number of methyl groups) and see whether the error for the branched isomers falls. Why would alcohols need yet another term?
🧪 Self-check quiz
Q1. Which of the following is a secondary allylic halide?
Q2. Statement I: The C–Cl bond in chlorobenzene is shorter than the C–Cl bond in chloromethane. Statement II: The C–I bond is the weakest carbon–halogen bond, so iodoalkanes are the most reactive haloalkanes in substitution. Choose the correct option.
Q3. Which reagent converts 2-bromopropane into 2-iodopropane in high yield?
Q4. The dichlorobenzene with the highest melting point and the dichlorobenzene with zero dipole moment are, respectively,
Q5. Toluene is treated with chlorine in sunlight at its boiling point, without any catalyst. The first monochloro product is