12.1 Werner's Theory, Ligands and IUPAC Nomenclature
A metal ion holds a fixed number of molecules or anions — its ligands — inside a coordination sphere, and keeps other ions loosely outside. Werner's two valencies explain why some chloride precipitates with silver nitrate and some does not; the coordination number, the oxidation state and the IUPAC name all follow from reading the bracket correctly.
Mix cobalt(III) chloride with excess ammonia and you can isolate a beautiful yellow-orange solid of composition $\mathrm{CoCl_{3}\cdot 6NH_{3}}$. Nineteenth-century chemists were puzzled by it. Cobalt chloride and ammonia are both stable compounds with their valencies satisfied — so what holds six more ammonia molecules to the cobalt, so firmly that boiling with dilute acid does not remove them? And why does a closely related purple solid, $\mathrm{CoCl_{3}\cdot 5NH_{3}}$, release only two of its three chlorides as $\mathrm{AgCl}$ when silver nitrate is added, while the yellow one releases all three?
The answer, given by Alfred Werner in 1893, founded a whole branch of chemistry. The metal ion holds a definite number of groups — the ligands — directly bonded to it in a fixed arrangement in space, and other ions sit outside this group as ordinary counter-ions. Such coordination compounds are everywhere: haemoglobin carries oxygen with an iron complex, chlorophyll traps light with a magnesium complex, vitamin $\mathrm{B_{12}}$ is a cobalt complex, cisplatin treats cancer, and EDTA softens hard water by wrapping up calcium ions. In this section we learn Werner's theory and the evidence for it, the vocabulary of ligands, denticity and chelation, how to find the coordination number and oxidation state of the central atom, and the IUPAC rules for naming complexes and writing formulas from names. Isomerism follows in Section 12.2 and bonding in Section 12.3.
Double salts, complexes and Werner's theory
Many compounds are formed by combining two or more stable compounds in a fixed ratio. They fall into two quite different classes, and the difference shows up as soon as the compound is dissolved in water.
A double salt is a compound formed from two simple salts in a fixed ratio that exists only in the solid (crystal) state; in water it dissociates completely into the simple ions of both salts. Examples: Mohr's salt $\mathrm{FeSO_{4}\cdot (NH_{4})_{2}SO_{4}\cdot 6H_{2}O}$, potash alum $\mathrm{K_{2}SO_{4}\cdot Al_{2}(SO_{4})_{3}\cdot 24H_{2}O}$, carnallite $\mathrm{KCl\cdot MgCl_{2}\cdot 6H_{2}O}$.
A coordination compound (complex compound) contains a complex ion or neutral coordination entity — a central metal atom or ion bonded to a fixed set of ions or molecules — that keeps its identity in solution and does not break up into the simple ions. Example: $\mathrm{K_{4}[Fe(CN)_{6}]}$ dissolves as $4\mathrm{K^{+}}$ and $\mathrm{[Fe(CN)_{6}]^{4-}}$.
The test is chemical. A solution of Mohr's salt gives every test of its parts: $\mathrm{Fe^{2+}}$ (a blue precipitate with potassium hexacyanidoferrate(III)), $\mathrm{NH_{4}^{+}}$ (ammonia gas on warming with $\mathrm{NaOH}$) and $\mathrm{SO_{4}^{2-}}$ (white $\mathrm{BaSO_{4}}$ with $\mathrm{BaCl_{2}}$). A solution of $\mathrm{K_{4}[Fe(CN)_{6}]}$, although it contains iron(II) and cyanide, gives neither a test for $\mathrm{Fe^{2+}}$ nor one for $\mathrm{CN^{-}}$: both are locked inside $\mathrm{[Fe(CN)_{6}]^{4-}}$. (That is why the salt is nowhere near as poisonous as $\mathrm{KCN}$.) The square brackets in a formula enclose exactly the part that stays together.
Werner studied the cobalt(III) chloride–ammonia compounds and the platinum(IV) chloride–ammonia compounds. He measured two things: how many moles of $\mathrm{AgCl}$ precipitate at once, in the cold, when excess silver nitrate is added to one mole of each compound, and the molar conductivity of a dilute solution, which grows with the number of ions a formula unit releases. (Freezing-point depressions, which count all particles, told the same story.)
| Composition | Colour | mol $\mathrm{AgCl}$ per mol | $\Lambda_m$ / $\mathrm{S\,cm^{2}\,mol^{-1}}$ (approx.) | Ions per formula unit | Werner formula |
|---|---|---|---|---|---|
| $\mathrm{CoCl_{3}\cdot 6NH_{3}}$ | yellow-orange | 3 | ≈ 430 | 4 | $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$ |
| $\mathrm{CoCl_{3}\cdot 5NH_{3}}$ | purple | 2 | ≈ 260 | 3 | $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$ |
| $\mathrm{CoCl_{3}\cdot 4NH_{3}}$ | green and violet forms | 1 | ≈ 100 | 2 | $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$ |
| $\mathrm{CoCl_{3}\cdot 3NH_{3}}$ | — | 0 | ≈ 0 | 0 (non-electrolyte) | $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$ |
Two facts stand out. First, the number of ammonia molecules plus the number of chlorides that do not precipitate is always $6$. Second, the green and violet forms of $\mathrm{CoCl_{3}\cdot 4NH_{3}}$ have the same composition and the same chemical tests but different colours — they must differ in the arrangement of the groups around the cobalt (they are the cis and trans isomers of Section 12.2). Werner explained both facts with two kinds of valency.
- In a coordination compound a metal shows two kinds of valency (combining power): primary valency and secondary valency.
- The primary valency is ionisable. It corresponds to the oxidation state of the metal and is satisfied by negative ions only. In $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$ the primary valency of cobalt is $3$.
- The secondary valency is non-ionisable. It equals the coordination number — the number of groups bonded directly to the metal — and is fixed for a given metal ion (6 for $\mathrm{Co^{3+}}$, $\mathrm{Cr^{3+}}$ and $\mathrm{Pt^{4+}}$; 4 for $\mathrm{Pt^{2+}}$, $\mathrm{Pd^{2+}}$ and usually $\mathrm{Cu^{2+}}$). It is satisfied by neutral molecules or negative ions.
- A negative ion inside the coordination sphere (such as the $\mathrm{Cl}$ in $\mathrm{[CoCl(NH_{3})_{5}]^{2+}}$) satisfies a primary and a secondary valency at the same time, and it is not ionisable.
- The secondary valencies are directed in space, so each complex has a definite geometry: octahedral for coordination number 6, tetrahedral or square planar for 4.
One mole of $\mathrm{PtCl_{4}\cdot 4NH_{3}}$ (Pt(IV), coordination number 6) is dissolved and $3$ mol of $\mathrm{AgNO_{3}}$ are added. How much $\mathrm{AgCl}$ forms?
One mole of an octahedral cobalt(III) compound $\mathrm{CoCl_{3}\cdot 4NH_{3}}$ gives one mole of $\mathrm{AgCl}$ with excess silver nitrate. How many ions does one formula unit give in water?
Ligands, denticity and chelation
Werner's ideas are now expressed in the language of coordinate bonds (Unit 3): each group attached to the metal donates a lone pair into an empty orbital of the metal. The metal is a Lewis acid, the attached groups are Lewis bases. The following words describe the parts of a complex.
- A coordination entity is a central metal atom or ion together with the ions or molecules bonded directly to it — everything written inside the square brackets: $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[Ni(CO)_{4}]}$, $\mathrm{[Fe(CN)_{6}]^{4-}}$. It may be a cation, an anion or neutral.
- The central atom or ion is the atom to which the others are bonded in a definite geometry — a Lewis acid ($\mathrm{Co^{3+}}$, $\mathrm{Ni}$, $\mathrm{Fe^{2+}}$ above).
- A ligand is an ion or molecule bound to the central atom through one or more of its atoms that donate an electron pair; these are the donor atoms (N in $\mathrm{NH_{3}}$, C in $\mathrm{CO}$ and $\mathrm{CN^{-}}$, O in $\mathrm{H_{2}O}$).
- The coordination sphere is the central atom with its ligands, enclosed in square brackets; the ions outside are the counter ions ($\mathrm{Cl^{-}}$ in $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, $\mathrm{K^{+}}$ in $\mathrm{K_{4}[Fe(CN)_{6}]}$).
Ligands are classified by how many donor atoms each one uses to bind the same metal.
The denticity of a ligand is the number of donor atoms through which it binds one central atom. A ligand is unidentate (one donor atom: $\mathrm{Cl^{-}}$, $\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, $\mathrm{CN^{-}}$, $\mathrm{CO}$), didentate or bidentate (two: ethane-1,2-diamine $\mathrm{H_{2}NCH_{2}CH_{2}NH_{2}}$ (en), oxalate $\mathrm{C_{2}O_{4}^{2-}}$ (ox), glycinate $\mathrm{H_{2}NCH_{2}COO^{-}}$ (gly)) or polydentate (several: diethylenetriamine (dien) is tridentate, ethylenediaminetetraacetate $\mathrm{EDTA^{4-}}$ is hexadentate).
A di- or polydentate ligand that binds one metal through two or more donor atoms forms a ring containing the metal, called a chelate ring (Greek chele, a crab's claw); the ligand is a chelating ligand and the complex a chelate.
An ambidentate ligand has two different donor atoms but uses only one of them at a time: $\mathrm{NO_{2}^{-}}$ binds through N (nitrito-N) or through O (nitrito-O, $\mathrm{ONO^{-}}$); $\mathrm{SCN^{-}}$ through S (thiocyanato-S) or N (thiocyanato-N, $\mathrm{NCS^{-}}$); $\mathrm{CN^{-}}$ through C (cyanido) or N (isocyanido).
| Ligand | Formula | Charge | Donor atom(s) | Denticity | Name in a complex |
|---|---|---|---|---|---|
| water | $\mathrm{H_{2}O}$ | 0 | O | 1 | aqua |
| ammonia | $\mathrm{NH_{3}}$ | 0 | N | 1 | ammine |
| carbon monoxide | $\mathrm{CO}$ | 0 | C | 1 | carbonyl |
| pyridine | $\mathrm{C_{5}H_{5}N}$ (py) | 0 | N | 1 | pyridine |
| chloride, bromide | $\mathrm{Cl^{-}}$, $\mathrm{Br^{-}}$ | −1 | Cl, Br | 1 | chlorido, bromido |
| cyanide | $\mathrm{CN^{-}}$ | −1 | C (or N) | 1 | cyanido (isocyanido) |
| hydroxide, oxide | $\mathrm{OH^{-}}$, $\mathrm{O^{2-}}$ | −1, −2 | O | 1 | hydroxido, oxido |
| nitrite | $\mathrm{NO_{2}^{-}}$ | −1 | N or O | 1 (ambidentate) | nitrito-N, nitrito-O |
| thiocyanate | $\mathrm{SCN^{-}}$ | −1 | S or N | 1 (ambidentate) | thiocyanato-S, thiocyanato-N |
| sulphate, carbonate | $\mathrm{SO_{4}^{2-}}$, $\mathrm{CO_{3}^{2-}}$ | −2 | O | 1 (or 2) | sulfato, carbonato |
| ethane-1,2-diamine | $\mathrm{H_{2}NCH_{2}CH_{2}NH_{2}}$ (en) | 0 | 2 N | 2 | ethane-1,2-diamine |
| oxalate | $\mathrm{C_{2}O_{4}^{2-}}$ (ox) | −2 | 2 O | 2 | oxalato |
| glycinate | $\mathrm{H_{2}NCH_{2}COO^{-}}$ (gly) | −1 | N and O | 2 | glycinato |
| diethylenetriamine | $\mathrm{HN(CH_{2}CH_{2}NH_{2})_{2}}$ (dien) | 0 | 3 N | 3 | diethylenetriamine |
| EDTA | $\mathrm{EDTA^{4-}}$ | −4 | 2 N, 4 O | 6 | ethylenediaminetetraacetato |
Why is chelation so important? Compare $\mathrm{[Ni(NH_{3})_{6}]^{2+}}$ and $\mathrm{[Ni(en)_{3}]^{2+}}$. Both have six Ni–N bonds of very similar strength, yet the second is about $10^{10}$ times more stable (its overall formation constant is about $10^{18}$ against about $10^{9}$). Adding ethane-1,2-diamine to a solution of the hexaammine complex replaces the ammonia completely.
A complex in which the metal is bound by chelating ligands is more stable than a comparable complex with the same number of similar donor atoms from unidentate ligands. Two qualitative reasons:
- Entropy. In $\mathrm{[Ni(NH_{3})_{6}]^{2+}(aq) + 3en(aq) \rightarrow [Ni(en)_{3}]^{2+}(aq) + 6NH_{3}(aq)}$ four solute particles become seven. The bond enthalpies hardly change, but the number of free particles — and so the entropy — increases, making $\Delta G$ negative.
- Ring closure. Once one end of a chelating ligand is attached, its second donor atom is held close to the metal and binds easily; if one end lets go, it is likely to re-attach before the whole ligand can drift away.
Chelate rings of five or six atoms (including the metal) are the most stable: smaller rings are strained, larger ones gain less. Uses: $\mathrm{EDTA}$ titrations for water hardness ($\mathrm{Ca^{2+}}$, $\mathrm{Mg^{2+}}$), EDTA in treating lead poisoning, dimethylglyoxime for detecting $\mathrm{Ni^{2+}}$.
The coordination number (CN) of the central atom is the number of ligand donor atoms bonded directly to it — equivalently, the number of coordinate (σ) bonds it forms with its ligands:
$$\text{CN}=\sum(\text{number of ligands of a kind})\times(\text{their denticity}).$$The coordination polyhedron is the shape formed by the donor atoms around the central atom: linear (CN 2, $\mathrm{[Ag(NH_{3})_{2}]^{+}}$), tetrahedral or square planar (CN 4, $\mathrm{[Ni(CO)_{4}]}$, $\mathrm{[PtCl_{4}]^{2-}}$), trigonal bipyramidal (CN 5, $\mathrm{[Fe(CO)_{5}]}$), octahedral (CN 6, $\mathrm{[Co(NH_{3})_{6}]^{3+}}$).
A complex with only one kind of ligand is homoleptic ($\mathrm{[Co(NH_{3})_{6}]^{3+}}$); one with more than one kind is heteroleptic ($\mathrm{[CoCl_{2}(NH_{3})_{4}]^{+}}$).
Which of these ligands is ambidentate?
Oxidation state of the central atom and counting ions
The square brackets carry all the information needed to find the oxidation state of the metal: the overall charge of the entity is the sum of the metal's oxidation state and the charges of the ligands.
The oxidation state (oxidation number) of the central atom is the charge it would carry if all the ligands were removed together with the electron pairs they share with it. With $x$ the oxidation state and $q$ the charge of the coordination entity,
$$x+\sum(\text{charges of the ligands})=q .$$Neutral ligands ($\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, $\mathrm{CO}$, py, en, dien) contribute $0$; $\mathrm{Cl^{-}}$, $\mathrm{Br^{-}}$, $\mathrm{CN^{-}}$, $\mathrm{OH^{-}}$, $\mathrm{NO_{2}^{-}}$, $\mathrm{SCN^{-}}$, gly contribute $-1$ each; $\mathrm{C_{2}O_{4}^{2-}}$, $\mathrm{SO_{4}^{2-}}$, $\mathrm{CO_{3}^{2-}}$, $\mathrm{O^{2-}}$ contribute $-2$; $\mathrm{EDTA^{4-}}$ contributes $-4$. The charge $q$ is found from the counter ions. (A special case you may meet: in $\mathrm{[Fe(CN)_{5}(NO)]^{2-}}$ the nitrosyl is counted as $\mathrm{NO^{+}}$, which makes iron $+2$.)
- Split the formula at the brackets: counter ions outside, coordination entity inside.
- Charge of the entity $q$: from the counter ions ($3\mathrm{Cl^{-}}$ outside means $q=+3$; $4\mathrm{K^{+}}$ outside means $q=-4$). If there are two complex ions, use the known oxidation state of one, or the fact that both are complexes of the same metal.
- Oxidation state: solve $x+\sum(\text{ligand charges})=q$.
- Coordination number: count donor atoms (en, ox, gly count 2; EDTA 6).
- Ions per formula unit = (number of counter ions) + (number of complex ions). Water of crystallisation is not an ion.
- Precipitation: only ions outside the bracket react — $\mathrm{Ag^{+}}$ with free $\mathrm{Cl^{-}}$, $\mathrm{Ba^{2+}}$ with free $\mathrm{SO_{4}^{2-}}$.
What is the oxidation state of cobalt in $\mathrm{[Co(C_{2}O_{4})(en)_{2}]Cl}$?
IUPAC names and formulas of mononuclear complexes
A formula like $\mathrm{[CoCl_{2}(en)_{2}]Cl}$ and the name dichloridobis(ethane-1,2-diamine)cobalt(III) chloride carry exactly the same information. The rules below are the current IUPAC recommendations for mononuclear complexes (one central atom). NEET asks both directions: name from formula and formula from name.
- Write the symbol of the central atom first.
- Then the ligands, in alphabetical order of their formulas or abbreviations, whatever their charge. Order by the first symbol: $\mathrm{Br}$ before $\mathrm{Cl}$ before en before $\mathrm{H_{2}O}$ before $\mathrm{NH_{3}}$ before ox; a one-letter symbol comes before a two-letter symbol with the same first letter ($\mathrm{CN}$, $\mathrm{CO}$ before $\mathrm{Cl}$).
- Put polyatomic ligands and abbreviations in parentheses: $\mathrm{(NH_{3})_{6}}$, $\mathrm{(CN)_{6}}$, $\mathrm{(en)_{2}}$.
- Enclose the entity in square brackets; give its charge, if any, as a superscript outside: $\mathrm{[Fe(CN)_{6}]^{4-}}$.
- In a salt write the cation first: $\mathrm{K_{4}[Fe(CN)_{6}]}$, $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, $\mathrm{[Co(NH_{3})_{6}][Cr(CN)_{6}]}$.
- Cation first, then anion, as for any salt — whether the complex is the cation (hexaamminecobalt(III) chloride) or the anion (potassium hexacyanidoferrate(II)).
- Inside the entity, ligands first, in alphabetical order of their names, then the metal. Multiplying prefixes are ignored when alphabetising: tetraammine goes under "a", dichlorido under "c".
- Anionic ligands end in -o: chloride → chlorido, cyanide → cyanido, hydroxide → hydroxido, oxalate → oxalato, sulphate → sulfato, nitrite → nitrito. Neutral ligands keep their names (ethane-1,2-diamine, pyridine) except $\mathrm{H_{2}O}$ aqua, $\mathrm{NH_{3}}$ ammine, $\mathrm{CO}$ carbonyl, $\mathrm{NO}$ nitrosyl. Ambidentate ligands show the donor atom: nitrito-N, nitrito-O, thiocyanato-S.
- Number of each ligand: di-, tri-, tetra-, penta-, hexa-. If the ligand name already contains a number or is complicated (ethane-1,2-diamine), use bis-, tris-, tetrakis- and parentheses: tris(ethane-1,2-diamine).
- The oxidation state of the metal follows its name in Roman numerals in parentheses, with no space: cobalt(III), nickel(0).
- If the entity is an anion, the metal name ends in -ate: cobaltate, nickelate, chromate, zincate, platinate, aluminate; some use the Latin root: ferrate (Fe), cuprate (Cu), argentate (Ag), aurate (Au), stannate (Sn), plumbate (Pb). Cationic and neutral entities use the plain metal name.
- A neutral complex is one word with no counter ion: triamminetrichloridocobalt(III).
Older names (chloro, cyano, hydroxo, nitro for nitrito-N, isothiocyanato for thiocyanato-N) still appear in many books and some NEET options; recognise them, but write the -ido names.
Iron(II) surrounded by six cyanide ions. Before you build it, what are the formula of its potassium salt and the name?
1. Coordination number is not the number of ligands. Count donor atoms: $\mathrm{[Co(en)_{3}]^{3+}}$ has three ligands but CN 6, $\mathrm{[Ca(EDTA)]^{2-}}$ one ligand and CN 6, $\mathrm{[Cu(gly)_{2}]}$ two ligands and CN 4. An option equal to the number of ligands is usually the trap.
2. Which valency is which. Primary valency = oxidation state, ionisable, satisfied by negative ions only. Secondary valency = coordination number, non-ionisable, satisfied by neutral molecules or negative ions. A chloride inside the bracket satisfies both at once. Statements that swap these words ("primary valency is non-ionisable", "secondary valency is satisfied only by neutral molecules") are false.
3. Only what is outside the bracket reacts or counts. One mole of $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$ gives one mole of $\mathrm{AgCl}$, not three; $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$ gives none and does not conduct. Water of crystallisation is not an ion, and $\mathrm{K_{4}[Fe(CN)_{6}]}$ gives no test for $\mathrm{Fe^{2+}}$ or $\mathrm{CN^{-}}$.
4. Charge of the entity ≠ oxidation state. $\mathrm{[CoCl(NH_{3})_{5}]^{2+}}$ carries $+2$ but cobalt is $+3$. Subtract the ligand charges every time: oxalate $-2$, glycinate $-1$, EDTA $-4$; $\mathrm{CO}$, en and $\mathrm{H_{2}O}$ zero, so $\mathrm{[Ni(CO)_{4}]}$ is nickel(0).
5. IUPAC spelling slips. Ammine ($\mathrm{NH_{3}}$, two m's) is not amine; aqua, not aquo; current names are chlorido, cyanido, hydroxido — older options may still say chloro or cyano. Names alphabetise by ligand name, ignoring di-, tri-, bis-; formulas order ligands by symbol. "-ate" (with ferrate, cuprate, argentate, aurate, stannate, plumbate) appears only for an anionic entity: potassium hexacyanidoferrate(III), but hexaamminecobalt(III) chloride.
6. Ambidentate, didentate, chelating. $\mathrm{NO_{2}^{-}}$, $\mathrm{SCN^{-}}$ and $\mathrm{CN^{-}}$ are ambidentate (one donor atom at a time, either end). Glycinate has two different donor atoms but uses both together: it is didentate and chelating, not ambidentate. Ethane-1,2-diamine and oxalate are didentate; EDTA is hexadentate.
Which is the correct IUPAC name of $\mathrm{K_{3}[Fe(CN)_{6}]}$?
Exercises
en = ethane-1,2-diamine, ox = oxalate $\mathrm{C_{2}O_{4}^{2-}}$, gly = glycinate. Molar masses: Ag $107.9$, Cl $35.5$, Br $79.9$, Ba $137.3$, S $32.1$, O $16.0\ \mathrm{g\,mol^{-1}}$.
- 1 Solutions of Mohr's salt and of $\mathrm{K_{4}[Fe(CN)_{6}]}$ both contain iron(II). Describe one test that gives a positive result with only one of them, and explain why.
- 2 In $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, what are the primary and secondary valencies of cobalt? Which groups satisfy each?
- 3 How many moles of $\mathrm{AgCl}$ are precipitated by excess $\mathrm{AgNO_{3}}$ from one mole of $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$?
- 4 How many ions does one formula unit of $\mathrm{[PtCl_{2}(NH_{3})_{4}]Cl_{2}}$ give in water?
- 5 Arrange in order of increasing molar conductivity: $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$, $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$, $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$.
- 6 $0.10\ \mathrm{mol}$ of $\mathrm{PtCl_{4}\cdot 3NH_{3}}$ (Pt(IV), CN 6) is treated with excess $\mathrm{AgNO_{3}}$. What mass of $\mathrm{AgCl}$ forms?
- 7 An octahedral chromium(III) compound $\mathrm{CrCl_{3}\cdot 4NH_{3}}$ releases one third of its chlorine as $\mathrm{AgCl}$. Write its Werner formula.
- 8 Why is $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$ a non-electrolyte although it contains three chlorine atoms?
- 1 Classify as unidentate, didentate, tridentate or hexadentate: $\mathrm{H_{2}O}$, en, $\mathrm{C_{2}O_{4}^{2-}}$, $\mathrm{EDTA^{4-}}$, gly, $\mathrm{NO_{2}^{-}}$, dien, $\mathrm{CN^{-}}$. Which of them are ambidentate?
- 2 What is the coordination number of iron in $\mathrm{[Fe(C_{2}O_{4})_{3}]^{3-}}$?
- 3 What is the coordination number of copper in $\mathrm{[Cu(gly)_{2}]}$?
- 4 How many chelate rings does one $\mathrm{EDTA^{4-}}$ ion form when it binds a metal through all six donor atoms?
- 5 Name the two linkage forms of a complex containing $\mathrm{SCN^{-}}$ and say which atom donates in each.
- 6 For $\mathrm{[Ni(NH_{3})_{6}]^{2+}(aq) + 3en(aq) \rightarrow [Ni(en)_{3}]^{2+}(aq) + 6NH_{3}(aq)}$, by how much does the number of solute particles increase? Use this to explain the chelate effect.
- 7 How many atoms (including the metal) make up the chelate ring formed by one en ligand?
- 8 Classify as homoleptic or heteroleptic: $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[CoCl_{2}(en)_{2}]^{+}}$, $\mathrm{[Ni(CO)_{4}]}$, $\mathrm{[Fe(CN)_{5}(NO)]^{2-}}$.
- 1 Find the oxidation state of chromium in $\mathrm{K_{3}[Cr(C_{2}O_{4})_{3}]}$.
- 2 Find the oxidation state of iron in $\mathrm{[Fe(CO)_{5}]}$ and its coordination number.
- 3 Find the oxidation state of cobalt in $\mathrm{[CoCl(en)_{2}(NH_{3})]SO_{4}}$.
- 4 In $\mathrm{[Pt(NH_{3})_{4}][PtCl_{6}]}$ the cation contains Pt(II). Find the charge of the anion and the oxidation state of its platinum.
- 5 Find the oxidation state of nickel in $\mathrm{[Ni(CN)_{4}]^{2-}}$ and in $\mathrm{[Ni(CO)_{4}]}$.
- 6 How many ions does one formula unit of $\mathrm{K_{3}[Fe(CN)_{6}]}$ give in water?
- 7 One mole of $\mathrm{[Co(NH_{3})_{6}]_{2}(SO_{4})_{3}}$ is treated with excess $\mathrm{BaCl_{2}}$. How many moles of $\mathrm{BaSO_{4}}$ form?
- 8 In $\mathrm{[Co(EDTA)]^{-}}$, find the oxidation state of cobalt and the coordination number.
- 1 Name $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$.
- 2 Name $\mathrm{K_{2}[PtCl_{6}]}$ and give the oxidation state of platinum.
- 3 Name $\mathrm{[CrCl_{2}(H_{2}O)_{4}]Cl}$.
- 4 Name $\mathrm{[Co(NH_{3})_{6}][Cr(CN)_{6}]}$ and give the oxidation state of chromium.
- 5 Write the formula of pentaamminenitrito-O-cobalt(III) chloride.
- 6 Write the formula of potassium tetrahydroxidozincate(II).
- 7 Write the formula of dichloridobis(ethane-1,2-diamine)platinum(IV) nitrate. How many ions does one formula unit give?
- 8 A student names $\mathrm{K_{2}[PtCl_{4}]}$ "potassium tetrachloridoplatinum(II)". Correct the name and explain the error.
- 9 How many hydrogen atoms are there in one formula unit of tetraamminediaquacobalt(III) chloride?
Six original problems in the NEET style — one correct option each, marked $+4$ / $-1$ / $0$. Aim for about a minute per problem. Before reading the options, split every formula at its brackets: counter ions outside, ligands inside; then the charge, the oxidation state, the coordination number and the ion count follow in a few seconds each.
E1. NEET · MCQ Silver nitrate solution is added gradually, in the cold, to solutions of two octahedral cobalt(III) compounds P and Q of composition $\mathrm{CoCl_{3}\cdot xNH_{3}}$ ($\mathrm{NH_{3}}$ the only neutral ligand). The graph shows the amount of $\mathrm{AgCl}$ formed per mole of compound. P and Q are (A) P $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, Q $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$ (B) P $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$, Q $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$ (C) P $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, Q $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$ (D) P $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$, Q $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$
E2. NEET · MCQ Given below are two statements. Statement I: In $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$ the chlorido ligand satisfies both a primary and a secondary valency of cobalt. Statement II: The secondary valency of a metal is ionisable and is equal to its oxidation state. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true
E3. NEET · MCQ Assertion (A): An aqueous solution of $\mathrm{K_{4}[Fe(CN)_{6}]}$ gives no test for $\mathrm{Fe^{2+}}$ ions. Reason (R): Cyanide is an ambidentate ligand. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E4. NEET · MCQ Match List-I (complex) with List-II (description).
List-I: P. $\mathrm{[Co(en)_{3}]^{3+}}$ · Q. $\mathrm{[Ca(EDTA)]^{2-}}$ · R. $\mathrm{[Cu(gly)_{2}]}$ · S. $\mathrm{[Ag(NH_{3})_{2}]^{+}}$
List-II: I. coordination number 2 · II. coordination number 4, from two didentate ligands each with two different donor atoms · III. coordination number 6, from a single ligand · IV. coordination number 6, from three ligands
Choose the correct answer. (A) P-III, Q-IV, R-II, S-I (B) P-IV, Q-III, R-I, S-II (C) P-II, Q-III, R-IV, S-I (D) P-IV, Q-III, R-II, S-I
E5. NEET · MCQ How many of the following IUPAC names are correct? (i) $\mathrm{K_{3}[Fe(CN)_{6}]}$: potassium hexacyanidoferrate(III) (ii) $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$: hexaamminecobaltate(III) chloride (iii) $\mathrm{K_{2}[PtCl_{4}]}$: potassium tetrachloridoplatinate(II) (iv) $\mathrm{[Ni(CO)_{4}]}$: tetracarbonylnickel(0) (v) $\mathrm{Na[Ag(CN)_{2}]}$: sodium dicyanidosilver(I) (vi) $\mathrm{[CrCl_{2}(H_{2}O)_{4}]Cl}$: tetraaquadichloridochromium(III) chloride (vii) $\mathrm{K_{2}[Zn(OH)_{4}]}$: potassium tetrahydroxidozinc(II) (A) $3$ (B) $4$ (C) $5$ (D) $6$
E6. NEET · MCQ In which of the following is the central metal in the $+3$ oxidation state with coordination number 6? (A) $\mathrm{K_{3}[Co(C_{2}O_{4})_{3}]}$ (B) $\mathrm{K_{2}[PtCl_{6}]}$ (C) $\mathrm{[Cu(gly)_{2}]}$ (D) $\mathrm{Na_{2}[Fe(CN)_{5}(NO)]}$
Research question. How hard is the water you drink — and how does a chelating ligand, EDTA, let you measure it to within a few milligrams per litre?
Why it matters. Calcium and magnesium ions cause scale in kettles, boilers and pipes, waste soap and shorten the life of water heaters. Water utilities from Chennai to Cape Town report hardness as mg of $\mathrm{CaCO_{3}}$ per litre, and the standard method is a titration with EDTA, which grips each $\mathrm{Ca^{2+}}$ or $\mathrm{Mg^{2+}}$ ion in a 1 : 1 hexadentate chelate — the chelate effect at work.
What to do.
- Collect 100 mL samples of tap water, bottled water, rainwater and (if available) borewell water.
- In a school laboratory, buffer each sample to pH 10 with an ammonia–ammonium chloride buffer, add Eriochrome Black T indicator (wine red with free metal ions) and titrate with 0.0100 M disodium EDTA until the colour turns blue.
- Since EDTA binds metal ions 1 : 1, moles of $\mathrm{Ca^{2+}}+\mathrm{Mg^{2+}}$ = moles of EDTA used. Convert to mg of $\mathrm{CaCO_{3}}$ per litre ($M=100\ \mathrm{g\,mol^{-1}}$).
- Repeat each titration until two readings agree within 0.1 mL, and compare your results with the hardness quoted on the bottled-water label or the local water board's report.
Tools: Burette, pipette, conical flasks, buffer, indicator, standard EDTA solution (prepared by the teacher), spreadsheet.
Hand in: A table of titres and hardness values, one worked calculation, the chemical equation for the chelation ($\mathrm{Ca^{2+} + EDTA^{4-} \rightarrow [Ca(EDTA)]^{2-}}$), and a paragraph explaining why a hexadentate ligand gives a much sharper end point than a unidentate one would.
Going further. Boil a sample for 15 minutes, filter and titrate again: the drop in hardness is the "temporary" (hydrogencarbonate) hardness. Why would ammonia, a unidentate ligand, be useless as a titrant for $\mathrm{Ca^{2+}}$?
🧪 Self-check quiz
Q1. The coordination number of cobalt in $\mathrm{[CoCl_{2}(en)_{2}]^{+}}$ is
Q2. Which of the following is a double salt rather than a coordination compound?
Q3. Which of the following ligands is ambidentate?
Q4. Statement I: One mole of $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$ gives one mole of $\mathrm{AgCl}$ with excess silver nitrate. Statement II: The two chlorido ligands of $\mathrm{[CoCl_{2}(NH_{3})_{4}]^{+}}$ satisfy only the secondary valency of cobalt. Choose the correct option.
Q5. The correct IUPAC name of $\mathrm{K_{3}[Fe(CN)_{6}]}$ is