Chapter 16 · Organic Compounds Containing Halogens

16.2 Substitution Mechanisms, Reactions and Environmental Effects

A nucleophile can replace the halogen of a haloalkane in one concerted step from the back (SN2, with inversion) or after the halide has left as a carbocation (SN1, with racemisation). This section shows which path wins and why, how elimination competes, what metals do to the C–X bond, how haloarenes react — and what chloroform, iodoform, freons and DDT have done for us and to us.

Shake 2-bromo-2-methylpropane with water and it turns into an alcohol within minutes; bromomethane under the same conditions barely changes, yet with hydroxide ions it is the faster of the two. Treat 2-bromobutane with aqueous potassium hydroxide and you get an alcohol; use alcoholic potassium hydroxide instead and you get mostly but-2-ene. Shine light on chloroform and it slowly turns into the war gas phosgene. Every one of these facts follows from the polar $\mathrm{C{-}X}$ bond of Section 16.1 and from the two ways in which a nucleophile can replace the halogen.

We first meet nucleophilic substitution and the one-step SN2 mechanism, then the two-step SN1 mechanism and the four factors that decide between them. Then come the reactions that compete with or extend substitution — elimination (Saytzeff's rule) and the reactions with sodium (Wurtz) and magnesium (Grignard reagents). Last, we see why haloarenes need electron-withdrawing groups before they undergo substitution, why a halogen on a ring directs to ortho and para positions although it deactivates the ring, and what the common polyhalogen compounds are used for and do to the environment. You will need carbocation stability and the electronic effects from Section 14.3 and chirality from Section 14.2.

Nucleophilic substitution and the SN2 mechanism

📘 Definition 16.4 — Nucleophilic substitution; leaving group

In a nucleophilic substitution an electron-rich species (the nucleophile, $\mathrm{Nu^{-}}$ or a neutral $\mathrm{Nu{:}}$) uses a lone pair to bond to the $\delta+$ carbon of $\mathrm{R{-}X}$ while the halogen departs with the bonding pair as a halide ion:

$$\mathrm{Nu^{-}+R{-}X\rightarrow R{-}Nu+X^{-}}$$

The group that departs with the electron pair is the leaving group. A good leaving group is a weak base that is stable on its own: $\mathrm{I^{-}\gt Br^{-}\gt Cl^{-}\gg F^{-}}$ — the conjugate bases of the strongest acids leave most easily.

By changing the nucleophile, one alkyl halide becomes almost any functional group. The table collects the reactions NEET asks about.

📐 Rule 16.5 — What $\mathrm{R{-}X}$ becomes
ReagentNucleophileProductClass
$\mathrm{NaOH}$ or $\mathrm{KOH}$ (aq)$\mathrm{HO^{-}}$$\mathrm{R{-}OH}$alcohol
$\mathrm{H_{2}O}$$\mathrm{H_{2}O}$$\mathrm{R{-}OH}$alcohol
$\mathrm{NaOR'}$$\mathrm{R'O^{-}}$$\mathrm{R{-}O{-}R'}$ether (Williamson synthesis)
$\mathrm{NaI}$ (acetone)$\mathrm{I^{-}}$$\mathrm{R{-}I}$alkyl iodide
$\mathrm{NH_{3}}$ (excess)$\mathrm{NH_{3}}$$\mathrm{R{-}NH_{2}}$primary amine
$\mathrm{KCN}$$\mathrm{{:}C{\equiv}N^{-}}$ (via C)$\mathrm{R{-}C{\equiv}N}$nitrile (one more carbon)
$\mathrm{AgCN}$$\mathrm{Ag{-}C{\equiv}N{:}}$ (via N)$\mathrm{R{-}N{\equiv}C}$isocyanide
$\mathrm{KNO_{2}}$$\mathrm{{}^{-}O{-}N{=}O}$ (via O)$\mathrm{R{-}O{-}N{=}O}$alkyl nitrite
$\mathrm{AgNO_{2}}$$\mathrm{Ag{-}O{-}N{=}O}$ (via N)$\mathrm{R{-}NO_{2}}$nitroalkane
$\mathrm{R'COOAg}$$\mathrm{R'COO^{-}}$$\mathrm{R'COOR}$ester
$\mathrm{LiAlH_{4}}$$\mathrm{H^{-}}$$\mathrm{R{-}H}$alkane
$\mathrm{R'C{\equiv}C^{-}Na^{+}}$$\mathrm{R'C{\equiv}C^{-}}$$\mathrm{R{-}C{\equiv}C{-}R'}$alkyne
📘 Definition 16.5 — Ambident nucleophile

An ambident nucleophile has two different atoms that can donate an electron pair. Cyanide can attack through carbon or nitrogen ($\mathrm{{}^{-}{:}C{\equiv}N{:}\leftrightarrow{:}C{=}N{:}^{-}}$); nitrite through nitrogen or oxygen.

Which end attacks depends on the reagent. KCN and $\mathrm{KNO_{2}}$ are ionic: the free anion attacks with its more nucleophilic end — carbon for cyanide (a C–C bond is stronger than C–N), oxygen for nitrite (where the negative charge is concentrated) — giving the nitrile and the alkyl nitrite. AgCN and $\mathrm{AgNO_{2}}$ are largely covalent: carbon (or nitrogen) is tied up in the bond to silver, so the free lone pair on nitrogen attacks, giving the isocyanide and the nitroalkane.

How does the substitution actually happen? For bromomethane and hydroxide, doubling either concentration doubles the rate: the rate is first order in each reactant and second order overall. Both species must be present in the slow step — and that step is the only step.

📘 Definition 16.6 — The SN2 mechanism

SN2 = Substitution, Nucleophilic, bimolecular. The nucleophile attacks the carbon from the side opposite to the leaving group (backside attack) while the C–X bond breaks, in a single step through one transition state in which carbon is partly bonded to both Nu and X and its other three groups lie in one plane.

$$\text{rate}=k\,[\mathrm{R{-}X}]\,[\mathrm{Nu^{-}}]\qquad(\text{second order};\ k\text{ in }\mathrm{L\,mol^{-1}\,s^{-1}})$$

The three groups flip over like an umbrella in the wind: the product has the inverted configuration (Walden inversion). Starting from one enantiomer of a chiral halide you get one enantiomer of the product, with the new group on the opposite side.

📐 Rule 16.6 — SN2 reactivity

Because the nucleophile must reach the back of the carbon, bulky groups slow SN2 down (steric hindrance):

$$\mathrm{CH_{3}X}\gt1^{\circ}\gt2^{\circ}\gg3^{\circ}$$

Approximate relative rates (ethyl = 1): methyl $30$, ethyl $1$, isopropyl $0.02$, tert-butyl too slow to measure. Branching on the next carbon also hinders: neopentyl bromide $\mathrm{(CH_{3})_{3}CCH_{2}Br}$, although primary, reacts about $10^{5}$ times more slowly than ethyl bromide.

For a given alkyl group: $\mathrm{R{-}I\gt R{-}Br\gt R{-}Cl\gg R{-}F}$ (leaving-group ability). SN2 is favoured by a strong, usually anionic nucleophile at high concentration and by a polar aprotic solvent (acetone, DMF, DMSO), which does not cage the anion with hydrogen bonds.

✏️ Example 1 — Six reagents, one bromide
1-Bromopropane is treated separately with (a) KCN, (b) AgCN, (c) $\mathrm{KNO_{2}}$, (d) $\mathrm{AgNO_{2}}$, (e) $\mathrm{C_{2}H_{5}ONa}$, (f) excess $\mathrm{NH_{3}}$. Give each product and its name. In how many of them is the new group attached to the propyl carbon through a nitrogen atom?
Count the products bonded to the propyl group through N before you look:
(a), (b) KCN: $\mathrm{CH_{3}CH_{2}CH_{2}{-}CN}$, butanenitrile (attached through C; the chain grows by one carbon). AgCN: $\mathrm{CH_{3}CH_{2}CH_{2}{-}NC}$, 1-isocyanopropane (propyl isocyanide), attached through N.
(c), (d) $\mathrm{KNO_{2}}$: $\mathrm{CH_{3}CH_{2}CH_{2}{-}O{-}N{=}O}$, propyl nitrite (through O). $\mathrm{AgNO_{2}}$: $\mathrm{CH_{3}CH_{2}CH_{2}{-}NO_{2}}$, 1-nitropropane (through N).
(e), (f) $\mathrm{CH_{3}CH_{2}CH_{2}{-}O{-}C_{2}H_{5}}$, 1-ethoxypropane (Williamson). $\mathrm{CH_{3}CH_{2}CH_{2}{-}NH_{2}}$, propan-1-amine (through N); excess ammonia keeps the amine from reacting further.
Count Through nitrogen: (b), (d), (f) — 3.
✏️ Example 2 — Reading an SN2 rate law
For $\mathrm{CH_{3}Br+OH^{-}\rightarrow CH_{3}OH+Br^{-}}$ at a fixed temperature, the initial rate is $1.0\times10^{-5}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ when $[\mathrm{CH_{3}Br}]=0.050\ \mathrm{mol\,L^{-1}}$ and $[\mathrm{OH^{-}}]=0.10\ \mathrm{mol\,L^{-1}}$. (a) Find $k$ with its unit. (b) By what factor does the rate change if $[\mathrm{CH_{3}Br}]$ is doubled and $[\mathrm{OH^{-}}]$ tripled? (c) What would the factor be if the reaction went by SN1?
Find the factor in (b):
(a) $k=\dfrac{\text{rate}}{[\mathrm{CH_{3}Br}][\mathrm{OH^{-}}]}=\dfrac{1.0\times10^{-5}}{0.050\times0.10}=2.0\times10^{-3}\ \mathrm{L\,mol^{-1}\,s^{-1}}$.
(b) $2\times3=6$: the rate becomes $6.0\times10^{-5}\ \mathrm{mol\,L^{-1}\,s^{-1}}$.
(c) SN1 rate $=k[\mathrm{RX}]$ only: factor $2$ — the hydroxide concentration would not matter.
Check Units: $\mathrm{mol\,L^{-1}\,s^{-1}}\div(\mathrm{mol\,L^{-1}})^{2}=\mathrm{L\,mol^{-1}\,s^{-1}}$, the unit of a second-order rate constant ✓.

An optically active 2-bromooctane reacts with $\mathrm{NaOH}$ in aqueous acetone by the SN2 mechanism. The octan-2-ol formed is

The SN1 mechanism and what decides the path

2-Bromo-2-methylpropane reacts with water at a rate that does not change when hydroxide is added: the rate depends on the halide alone. The slow step must involve only the halide.

📘 Definition 16.7 — The SN1 mechanism

SN1 = Substitution, Nucleophilic, unimolecular. It takes two steps: (1) slow heterolysis of the C–X bond to a carbocation and a halide ion; (2) fast attack of the nucleophile on the carbocation (followed, with water or an alcohol, by loss of $\mathrm{H^{+}}$).

$$\text{rate}=k\,[\mathrm{R{-}X}]\qquad(\text{first order};\ k\text{ in }\mathrm{s^{-1}})$$

The carbocation is $sp^{2}$ and planar, so the nucleophile can attack either face. A single enantiomer of a chiral halide gives an (almost) racemic product — racemisation. In practice a slight excess of the inverted product is usually found, because the departing halide briefly shields the front face.

Retention, inversion and racemisation. Three words describe what a reaction does to a stereocentre. If no bond to the stereocentre is broken, the spatial arrangement of its four bonds is kept — retention of configuration. Turning the $\mathrm{CH_{2}OH}$ group of optically active 2-methylbutan-1-ol into $\mathrm{CH_{2}Cl}$ is an example: the stereocentre C-2 is not touched, so the chloride has the same configuration as the alcohol, even if the two happen to rotate plane-polarised light in opposite directions. If the new group takes up the position opposite to the old one, the configuration is inverted (SN2). If both arrangements form in equal amounts, the product is racemised (SN1, ideally). Note that the sign of rotation, $(+)$ or $(-)$, is measured, not predicted: inversion of configuration does not automatically reverse it.

📐 Rule 16.7 — SN1 reactivity

The rate is set by the stability of the carbocation (inductive effect and hyperconjugation of alkyl groups; resonance for allyl and benzyl):

$$3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{CH_{3}X}$$

Relative rates of solvolysis of alkyl bromides in methanoic acid (methyl $=1$): ethyl $1.7$, isopropyl $45$, tert-butyl about $10^{8}$. Allylic and benzylic halides react quickly by SN1 because their cations are resonance-stabilised ($\mathrm{CH_{2}{=}CH{-}CH_{2}^{+}\leftrightarrow{}^{+}CH_{2}{-}CH{=}CH_{2}}$); being primary, they react quickly by SN2 too. Benzylic stability rises with further aryl groups: $\mathrm{(C_{6}H_{5})_{3}C^{+}\gt(C_{6}H_{5})_{2}CH^{+}\gt C_{6}H_{5}CH_{2}^{+}}$. Vinylic and aryl halides react by neither path.

📐 Rule 16.8 — Four factors that choose between SN1 and SN2
FactorFavours SN2Favours SN1
substrate$\mathrm{CH_{3}X}$, $1^{\circ}$ (little crowding)$3^{\circ}$, allylic, benzylic (stable cation)
nucleophilestrong, anionic, concentrated ($\mathrm{HO^{-}}$, $\mathrm{RO^{-}}$, $\mathrm{CN^{-}}$, $\mathrm{I^{-}}$)weak, neutral ($\mathrm{H_{2}O}$, $\mathrm{ROH}$) — solvolysis
solventpolar aprotic (acetone, DMF, DMSO)polar protic (water, alcohols, methanoic acid) — solvates both ions
leaving groupa better leaving group ($\mathrm{I^{-}\gt Br^{-}\gt Cl^{-}}$) speeds up both mechanisms

$2^{\circ}$ halides sit on the border: strong nucleophile in an aprotic solvent → SN2; water or alcohol as solvent and nucleophile → SN1.

🧭 Problem-solving strategy — SN1 or SN2?
  1. Look at the carbon carrying X. $sp^{2}$ (vinyl, aryl)? No ordinary substitution. Methyl or $1^{\circ}$ (not allylic/benzylic)? SN2. $3^{\circ}$? SN1 (or elimination with a strong base).
  2. For $2^{\circ}$, allylic and benzylic halides read the conditions: anionic nucleophile + aprotic solvent → SN2; neutral nucleophile that is also the solvent → SN1.
  3. Stereochemistry follows the path: SN2 → inversion; SN1 → racemisation.
  4. Rate law follows the path: SN2 depends on [Nu]; SN1 does not.

In the animator choose SN2. If the substrate is changed from bromomethane to 2-bromopropane, by roughly what factor does the SN2 rate fall?

The relative-rate readout shows $30$ for $\mathrm{CH_{3}Br}$ and $0.02$ for $\mathrm{(CH_{3})_{2}CHBr}$: a factor of $30/0.02=1500$. In the animation the two methyl groups on the back of the carbon stand in the nucleophile's way, and the SN2 energy hump in the profile grows taller. Switch to SN1 and the order reverses: $1$ for $\mathrm{CH_{3}Br}$ against $45$ for 2-bromopropane.
Interactive 1 — SN2 and SN1 Animator

Choose a mechanism and a substrate R–Br, then press Play. Left: the nucleophile (green) and the leaving bromide (red) around the carbon and its three groups — watch the umbrella flip in SN2, and in SN1 the flat carbocation attacked from the left or the right (the tally counts each side). Right: a schematic energy profile (not to scale) with a dot following the reaction. Readouts give the rate law, the stereochemistry and measured relative rates.

rate law—
steps; intermediate—
stereochemistry—
relative rate—
✏️ Example 3 — Ranking substitution rates
(a) Rank by SN1 reactivity (fastest first) and give the answer as a four-digit code: (1) $\mathrm{C_{6}H_{5}CH(Br)CH_{3}}$, (2) $\mathrm{CH_{3}CH_{2}CH_{2}Br}$, (3) $\mathrm{(CH_{3})_{2}CHBr}$, (4) $\mathrm{C_{6}H_{5}Br}$. (b) Rank by SN2 reactivity with NaI in acetone: (1) $\mathrm{CH_{3}Br}$, (2) $\mathrm{(CH_{3})_{3}CBr}$, (3) $\mathrm{CH_{3}CH_{2}Br}$, (4) $\mathrm{(CH_{3})_{2}CHBr}$.
(a) Cations: (1) gives a secondary benzylic cation (resonance with the ring plus hyperconjugation) — most stable; (3) secondary; (2) primary; (4) would need a phenyl cation — does not react. Order $1\gt3\gt2\gt4$: 1324.
(b) Steric hindrance at the back of the carbon: $\mathrm{CH_{3}Br}$ (1) $\gt$ $1^{\circ}$ (3) $\gt$ $2^{\circ}$ (4) $\gt$ $3^{\circ}$ (2): 1342.
Insight The two orders are almost mirror images: what stabilises a carbocation (alkyl groups) is exactly what crowds the SN2 transition state.
✏️ Example 4 — NEET level: how much racemisation?
Optically pure (–)-3-chloro-3-methylhexane is hydrolysed in aqueous ethanol. The 3-methylhexan-3-ol obtained rotates plane-polarised light in the direction expected for the inverted product, with a rotation equal to $15\,\%$ of that of the optically pure inverted alcohol. (a) Which mechanism operates, and why? (b) What percentage of the reaction proceeded with racemisation? (c) What is the percentage of each enantiomer in the product?
Find (b) first:
(a) SN1: the halide is tertiary (no backside access, stable $3^{\circ}$ cation) and the nucleophile is the neutral, protic solvent.
Model Let a fraction $r$ react with racemisation (equal amounts of both enantiomers, no net rotation) and $1-r$ with inversion. Observed rotation $=(1-r)\times$ rotation of pure inverted product.
(b) $1-r=0.15$, so $r=0.85$: 85 % racemisation.
(c) Inverted: $0.85/2+0.15=0.575$ → $57.5\,\%$; retained: $42.5\,\%$. The enantiomeric excess is $57.5-42.5=15\,\%$, matching the rotation.
Insight The excess of inversion comes from the ion pair: for a moment the departing $\mathrm{Cl^{-}}$ shields the face it left from, so the nucleophile arrives slightly more often from the back.

Which change speeds up the SN1 hydrolysis of 2-bromo-2-methylpropane?

Elimination and reactions with metals

A hydroxide or alkoxide ion is both a nucleophile and a strong base. Instead of attacking carbon it may pull off a proton from the carbon next to the C–X carbon, and the halide leaves at the same time: an alkene forms.

📘 Definition 16.8 — β-Elimination (dehydrohalogenation)

Heating a haloalkane with a strong base in alcohol (alcoholic KOH, sodium ethoxide) removes HX from two adjacent carbons: X from the α-carbon (the one carrying X) and H from a β-carbon (a carbon bonded to it):

$$\mathrm{R{-}CH_{2}{-}CH_{2}{-}X+KOH\xrightarrow[\Delta]{\text{alcohol}}R{-}CH{=}CH_{2}+KX+H_{2}O}$$

Ease of elimination: $3^{\circ}\gt2^{\circ}\gt1^{\circ}$ and $\mathrm{R{-}I\gt R{-}Br\gt R{-}Cl}$.

📐 Rule 16.9 — Saytzeff (Zaitsev) rule

When a haloalkane has more than one kind of β-hydrogen, the major product is the more substituted alkene — the one with more alkyl groups on the doubly bonded carbons. Equivalently, the hydrogen is lost preferentially from the β-carbon that has fewer hydrogens. More alkyl groups mean more hyperconjugation and a more stable alkene; where E/Z isomers exist, the trans (E) form usually predominates.

$$\mathrm{CH_{3}CH_{2}CH(Br)CH_{3}\xrightarrow[\Delta]{\text{alc. KOH}}\underset{\text{major, about }80\,\%}{\mathrm{CH_{3}CH{=}CHCH_{3}}}+\underset{\text{minor}}{\mathrm{CH_{3}CH_{2}CH{=}CH_{2}}}}$$

Substitution or elimination? Both happen together; conditions tip the balance. Elimination is favoured by a strong, concentrated base in alcohol, high temperature and a crowded ($3^{\circ}$) halide — a $3^{\circ}$ halide with alcoholic KOH gives almost only alkene. Substitution is favoured by aqueous solution, lower temperature, a good nucleophile that is a weak base ($\mathrm{I^{-}}$, $\mathrm{CN^{-}}$) and a $1^{\circ}$ halide. The memory line: aqueous KOH substitutes, alcoholic KOH eliminates.

✏️ Example 5 — One halide, two reagents
2-Bromo-2-methylbutane is heated (a) with alcoholic KOH, (b) with water. Give the products. How many structurally different alkenes can form, and which is the major one?
β-H $\mathrm{(CH_{3})_{2}C(Br){-}CH_{2}CH_{3}}$: the α-carbon C-2 has three β-carbons — two equivalent $\mathrm{CH_{3}}$ groups and the $\mathrm{CH_{2}}$ of the ethyl group. Two kinds of β-H, so 2 alkenes.
(a) Loss of H from $\mathrm{CH_{2}}$: 2-methylbut-2-ene, $\mathrm{(CH_{3})_{2}C{=}CHCH_{3}}$ (three alkyl groups on C=C) — major (Saytzeff). Loss from a $\mathrm{CH_{3}}$: 2-methylbut-1-ene, $\mathrm{CH_{2}{=}C(CH_{3})CH_{2}CH_{3}}$ (two alkyl groups) — minor. Neither has E/Z isomers.
(b) With water (weak base, protic solvent) the $3^{\circ}$ halide ionises: SN1 gives 2-methylbutan-2-ol as the main product, with some alkene from the same carbocation losing $\mathrm{H^{+}}$.
Check Interactive 2 with this substrate shows 2 distinct alkenes and marks 2-methylbut-2-ene as the Saytzeff product.

Choose 2-bromo-3-methylbutane, $\mathrm{CH_{3}CH(Br)CH(CH_{3})_{2}}$. With alcoholic KOH, which alkene will the widget mark as the Saytzeff product?

The readouts show 2 structurally different alkenes. Removing H from C-1 gives 3-methylbut-1-ene with only 1 alkyl group on C=C; removing the single H from C-3 gives 2-methylbut-2-ene with 3. Saytzeff's rule picks the more substituted alkene — H is lost from the β-carbon with fewer hydrogens. 2-Methylbut-1-ene and pent-2-ene cannot form: elimination never moves the carbon skeleton.
Interactive 2 — Saytzeff Elimination Chooser

Pick a bromoalkane. The α-carbon (carrying Br) is ringed red; β-carbons that carry hydrogen are ringed blue. Choose which β-hydrogen the base removes (or press Play to cycle through them): the alkene formed is drawn underneath, and the bars on the right compare the number of alkyl groups on the C=C of every possible alkene. The tallest bar is the Saytzeff (major) product.

distinct alkenes (structural)—
counting E/Z isomers—
Saytzeff product—
alkyl groups on its C=C—

Reactions with metals. Electropositive metals reverse the polarity of the carbon: they hand it electrons.

📘 Definition 16.9 — Grignard reagent

An alkyl or aryl halide reacts with magnesium turnings in dry ether to give an alkyl- (or aryl-)magnesium halide, $\mathrm{R{-}MgX}$, a Grignard reagent: $\mathrm{R{-}X+Mg\xrightarrow{\text{dry ether}}R{-}MgX}$. Reactivity of the halide: $\mathrm{I\gt Br\gt Cl}$. The ether solvates and stabilises the magnesium.

In $\mathrm{C{-}Mg}$ the carbon is the negative end ($\delta-$C–Mg$\delta+$): the carbon behaves as a carbanion — a very strong base and a good nucleophile. Any compound with a hydrogen on O, N, S or a terminal alkyne carbon ("active hydrogen") destroys it, releasing the alkane: $\mathrm{RMgX+H_{2}O\rightarrow RH+Mg(OH)X}$. That is why apparatus and reagents must be dry. Its uses in making alcohols are met in Section 17.3.

✏️ Example 6 — NEET level: counting with sodium and magnesium
(a) An equimolar mixture of bromomethane and bromoethane is heated with sodium in dry ether. Name the alkanes formed and say which has the highest boiling point. (b) $0.25\ \mathrm{mol}$ of 2-aminoethanol, $\mathrm{HO{-}CH_{2}CH_{2}{-}NH_{2}}$, is added to excess $\mathrm{CH_{3}MgBr}$. How many moles of methane are evolved? (c) Why can a Grignard reagent not be made from 4-bromobutan-1-ol?
Moles of methane in (b):
(a) $\mathrm{CH_{3}{-}CH_{3}}$ (ethane), $\mathrm{CH_{3}{-}C_{2}H_{5}}$ (propane), $\mathrm{C_{2}H_{5}{-}C_{2}H_{5}}$ (butane). Butane, the largest, boils highest ($273\ \mathrm{K}$).
(b) Active hydrogens: 1 on O + 2 on N = 3 per molecule. $n(\mathrm{CH_{4}})=3\times0.25=0.75\ \mathrm{mol}$: $\mathrm{HOCH_{2}CH_{2}NH_{2}+3CH_{3}MgBr\rightarrow BrMgOCH_{2}CH_{2}N(MgBr)_{2}+3CH_{4}}$.
(c) As soon as a $\mathrm{C{-}MgBr}$ forms it is protonated by the O–H of another molecule (or its own), giving butan-1-ol's magnesium salt and destroying the reagent.
⏱ Shortcut Moles of $\mathrm{CH_{4}}$ = moles of compound × (number of H on O, N, S and on terminal $\mathrm{C{\equiv}C{-}H}$).

2-Bromobutane is heated with alcoholic KOH. The major product is

Reactions of haloarenes; uses and effects of polyhalogen compounds

Nucleophilic substitution in haloarenes. Rule 16.2 explained why chlorobenzene shrugs off hydroxide under ordinary conditions. It can be forced: with aqueous NaOH at about $623\ \mathrm{K}$ and $300\ \mathrm{atm}$ it gives sodium phenoxide, which acidification turns into phenol. The reaction becomes easy when an electron-withdrawing group such as $\mathrm{{-}NO_{2}}$ sits ortho or para to the halogen.

📐 Rule 16.10 — How haloarenes react

Nucleophilic substitution goes by addition of the nucleophile (giving a carbanion in which the ring has lost its aromaticity) followed by loss of $\mathrm{X^{-}}$. Electron-withdrawing groups ortho/para to X stabilise the carbanion by resonance and lower the temperature needed; each extra nitro group helps further. Hydrolysis to the phenol: chlorobenzene about $623\ \mathrm{K}$ (high pressure); 1-chloro-4-nitrobenzene about $443\ \mathrm{K}$; 1-chloro-2,4-dinitrobenzene about $368\ \mathrm{K}$; 2-chloro-1,3,5-trinitrobenzene with warm water. A meta nitro group cannot take the charge and helps only slightly (by its $-I$ effect).

Electrophilic substitution: the halogen is deactivating yet ortho/para-directing. Its $-I$ effect withdraws electron density from the whole ring (slower than benzene); its $+R$ effect (the resonance of Section 16.1) puts extra density on the ortho and para carbons and stabilises the cations formed by attack there. $-I$ wins for the rate, $+R$ decides the orientation; the para product usually predominates (less crowding).

The usual electrophilic reactions of chlorobenzene therefore give mainly 1,4- with some 1,2-products:

$$\mathrm{C_{6}H_{5}Cl\xrightarrow[\text{anhyd. }FeCl_{3}]{Cl_{2}}}\ \text{1,4- (major) and 1,2-dichlorobenzene}\qquad\mathrm{C_{6}H_{5}Cl\xrightarrow{conc.\ HNO_{3}/H_{2}SO_{4}}}\ \text{1-chloro-4-nitrobenzene (major)}$$ $$\mathrm{C_{6}H_{5}Cl\xrightarrow{conc.\ H_{2}SO_{4}}}\ \text{4-chlorobenzenesulphonic acid}\qquad\mathrm{C_{6}H_{5}Cl\xrightarrow[\text{anhyd. }AlCl_{3}]{CH_{3}COCl}}\ \text{1-(4-chlorophenyl)ethan-1-one (major)}$$

Friedel–Crafts methylation with $\mathrm{CH_{3}Cl}$/anhydrous $\mathrm{AlCl_{3}}$ gives 1-chloro-4-methylbenzene (major) and 1-chloro-2-methylbenzene.

Polyhalogen compounds: uses and environmental effects.

✏️ Example 7 — NEET style: identify the bromide from three clues
A bromoalkane X, $\mathrm{C_{4}H_{9}Br}$, is optically active. Heated with alcoholic KOH it gives a major alkene Y that shows geometrical (cis–trans) isomerism; warmed with aqueous KOH it gives an alcohol Z. Which statement is correct? (A) X is 1-bromobutane and Y is but-1-ene (B) X is 2-bromobutane, Y is but-2-ene and Z is butan-2-ol (C) X is 2-bromo-2-methylpropane and Y is 2-methylpropene (D) X is 1-bromo-2-methylpropane and Z is 2-methylpropan-1-ol
Before you open the solution, find how many of the four structural isomers of $\mathrm{C_{4}H_{9}Br}$ are chiral:
Clue 1: optically active The isomers are 1-bromobutane, 2-bromobutane, 1-bromo-2-methylpropane and 2-bromo-2-methylpropane. Only in 2-bromobutane does a carbon carry four different groups (H, Br, $\mathrm{CH_{3}}$, $\mathrm{C_{2}H_{5}}$) — one chiral isomer. In 1-bromo-2-methylpropane C-2 carries two $\mathrm{CH_{3}}$ groups. So X is 2-bromobutane, and (A), (C) and (D) are already out.
Clue 2: Y Saytzeff's rule (Rule 16.9): the major alkene is but-2-ene, $\mathrm{CH_{3}CH{=}CHCH_{3}}$, which exists as cis and trans forms (each doubly bonded carbon carries H and $\mathrm{CH_{3}}$). But-1-ene would show no geometrical isomerism.
Clue 3: Z Aqueous KOH substitutes: butan-2-ol. If the reaction goes by SN2 the alcohol is formed with inverted configuration (Definition 16.6).
Answer (B).
⏱ Shortcut Use the cheapest clue first: "optically active $\mathrm{C_{4}H_{9}Br}$" fixes the structure by itself. The other two clues only confirm it — in the exam, check one of them and move on.
⚠️ NEET traps

1. Silver salt or potassium salt? KCN → nitrile R–CN (chain grows by one carbon); AgCN → isocyanide R–NC. $\mathrm{KNO_{2}}$ → alkyl nitrite R–O–N=O; $\mathrm{AgNO_{2}}$ → nitroalkane R–NO₂. The silver salts attack through nitrogen in both cases.

2. Rate laws and orders of reactivity are mirror images. SN2: rate $=k[\mathrm{RX}][\mathrm{Nu^{-}}]$, $\mathrm{CH_{3}X}\gt1^{\circ}\gt2^{\circ}\gt3^{\circ}$. SN1: rate $=k[\mathrm{RX}]$, $3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{CH_{3}X}$ — changing [Nu] changes nothing. Allylic and benzylic halides are fast by both; vinylic and aryl halides by neither.

3. Stereochemistry words. SN2 → inversion (one enantiomer, still optically active). SN1 → racemisation (mostly racemic, little or no rotation). Retention means no bond to the stereocentre was broken. The sign $(+)$/$(-)$ is not the configuration: an inverted product may rotate light either way.

4. Aqueous or alcoholic KOH; Saytzeff the right way round. Aqueous → alcohol (substitution); alcoholic, heat → alkene (elimination). The major alkene has more alkyl groups on C=C, i.e. H leaves the β-carbon that has fewer H. A $3^{\circ}$ halide with a strong base gives almost only alkene.

5. Name the metal reaction correctly. Wurtz: $\mathrm{R{-}X}$ + Na, dry ether → R–R. Wurtz–Fittig: ArX + RX + Na → Ar–R. Fittig: ArX + Na → Ar–Ar. Grignard: RX + Mg, dry ether → RMgX, which any O–H, N–H or terminal C≡C–H turns into the alkane RH.

6. Haloarenes and polyhalogen facts. Chlorobenzene needs about $623\ \mathrm{K}$ and high pressure for hydrolysis; only o/p-nitro groups help much (a meta nitro hardly). Cl deactivates the ring yet directs o/p. Chloroform: dark bottles filled to the brim, about 1 % ethanol (phosgene). Iodoform's antiseptic action is due to the iodine it releases. Freons are non-toxic — their harm is to stratospheric ozone. DDT is fat-soluble and not biodegradable.

Chloroform is stored in dark bottles completely filled, with a little ethanol added, because

Exercises

Atomic masses: H 1, C 12, N 14, O 16, Na 23, Cl 35.5, Br 80, I 127.

I
Nucleophilic substitution, ambident nucleophiles and SN2 kinetics.
  • 1 Write the product of bromoethane with aqueous KOH and with sodium methoxide; name both.
  • 2 Write the product of bromoethane with KCN. What is its molar mass?
  • 3 Bromoethane gives different products with KCN and with AgCN. Explain using the idea of an ambident nucleophile.
  • 4 Give the products of 2-bromopropane with $\mathrm{AgNO_{2}}$ and with $\mathrm{KNO_{2}}$, and name them.
  • 5 Draw the transition state for the SN2 reaction of iodide ion with chloromethane, showing partial bonds and partial charges.
  • 6 For an SN2 reaction, rate $=4.0\times10^{-5}\ \mathrm{mol\,L^{-1}\,s^{-1}}$ when $[\mathrm{RX}]=0.020$ and $[\mathrm{OH^{-}}]=0.050\ \mathrm{mol\,L^{-1}}$. Find $k$ in $\mathrm{L\,mol^{-1}\,s^{-1}}$.
  • 7 In the reaction of part 6, $[\mathrm{RX}]$ is halved and $[\mathrm{OH^{-}}]$ is made four times larger. By what factor does the rate change?
  • 8 Bromoethane is heated with ammonia, the halide being in excess. How many different nitrogen-containing products (amines and the quaternary salt) can form?
1 $\mathrm{C_{2}H_{5}OH}$, ethanol; $\mathrm{C_{2}H_{5}OCH_{3}}$, methoxyethane.
2 $\mathrm{CH_{3}CH_{2}CN}$, propanenitrile; $M=3\times12+5+14=55\ \mathrm{g\,mol^{-1}}$.
3 Cyanide can donate through C or N. Ionic KCN gives a free $\mathrm{CN^{-}}$ that attacks through carbon → propanenitrile, $\mathrm{C_{2}H_{5}CN}$. AgCN is covalent (Ag–C bond), so the lone pair on N attacks → ethyl isocyanide $\mathrm{C_{2}H_{5}NC}$.
4 $\mathrm{AgNO_{2}}$: $\mathrm{(CH_{3})_{2}CHNO_{2}}$, 2-nitropropane; $\mathrm{KNO_{2}}$: $\mathrm{(CH_{3})_{2}CH{-}O{-}N{=}O}$, 1-methylethyl nitrite (isopropyl nitrite).
5 $[\mathrm{I^{\delta-}\cdots CH_{3}\cdots Cl^{\delta-}}]^{\ddagger}$: I, C and Cl in a straight line, the three H in a plane perpendicular to it, overall charge $-1$.
6 $k=\dfrac{4.0\times10^{-5}}{0.020\times0.050}=0.040\ \mathrm{L\,mol^{-1}\,s^{-1}}$.
7 $\tfrac12\times4=2$: the rate doubles.
8 $\mathrm{C_{2}H_{5}NH_{2}}$, $\mathrm{(C_{2}H_{5})_{2}NH}$, $\mathrm{(C_{2}H_{5})_{3}N}$ and $\mathrm{(C_{2}H_{5})_{4}N^{+}Br^{-}}$: 4 (each amine is itself a nucleophile).
II
SN1, stereochemistry and the factors.
  • 1 For the SN1 hydrolysis of 2-chloro-2-methylpropane, by what factor does the rate change if $[\mathrm{RCl}]$ is doubled and the concentration of the nucleophile is tripled?
  • 2 Label (1) $\mathrm{CH_{3}CH_{2}Br}$, (2) $\mathrm{(CH_{3})_{3}CBr}$, (3) $\mathrm{(CH_{3})_{2}CHBr}$, (4) $\mathrm{CH_{3}Br}$. Give the order of SN1 reactivity (fastest first) as a four-digit code.
  • 3 Label (1) $\mathrm{(CH_{3})_{3}CCH_{2}Br}$, (2) $\mathrm{CH_{3}CH_{2}CH_{2}Br}$, (3) $\mathrm{CH_{3}Br}$, (4) $\mathrm{(CH_{3})_{2}CHBr}$. Give the order of SN2 reactivity (fastest first) as a code.
  • 4 Which reacts faster with NaI in acetone, 1-chlorobutane or 1-bromobutane? Why?
  • 5 Explain why SN2 reactions of anions are faster in acetone or DMSO than in water, while SN1 reactions are faster in water.
  • 6 Optically active 2-bromobutane reacts with NaOH in acetone by SN2. Is the butan-2-ol optically active? Describe its configuration.
  • 7 An SN1 hydrolysis of an optically pure tertiary halide gives an alcohol whose rotation is $30\,\%$ of that of the pure inverted alcohol. What percentage of the product is the inverted enantiomer?
  • 8 Explain why 3-chloropropene undergoes SN1 hydrolysis much faster than 1-chloropropane.
  • 9 How many stereoisomeric alcohols are formed in the SN1 hydrolysis of one enantiomer of 3-bromo-3-methylhexane?
1 Rate $=k[\mathrm{RCl}]$: factor $2$.
2 $3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt$ methyl: 2314.
3 $\mathrm{CH_{3}Br}$ (3) $\gt$ 1-bromopropane (2) $\gt$ 2-bromopropane (4, relative rate ≈ 0.02) $\gt$ neopentyl bromide (1, ≈ $10^{-5}$): 3241.
4 1-Bromobutane: $\mathrm{Br^{-}}$ is the better leaving group (weaker C–Br bond, weaker base).
5 Water hydrogen-bonds to the anionic nucleophile and lowers its energy and reactivity; aprotic solvents leave it "naked". In SN1 the slow step creates ions, which water solvates strongly, lowering the energy of the transition state.
6 Yes: a single enantiomer with the inverted configuration (OH on the side opposite to where Br was).
7 Inverted excess $30\,\%$, racemised $70\,\%$: inverted $=35+30=65\,\%$, retained $35\,\%$.
8 It ionises to the allyl cation, whose charge is shared by two carbons through resonance; the propyl cation has no such stabilisation.
9 The planar cation is attacked on both faces: 2 (a racemic pair).
III
Elimination and reactions with metals.
  • 1 Give the major and minor products of 2-bromobutane with alcoholic KOH and explain the choice.
  • 2 How many structurally different alkenes can 2-bromo-3-methylbutane give on dehydrobromination?
  • 3 How many alkenes, counting geometrical isomers separately, can 2-bromopentane give?
  • 4 Which of 1-bromobutane, 2-bromo-2-methylpropane and 2-bromobutane gives a single alkene (no isomers of any kind)?
  • 5 A mixture of 1-bromopropane and bromomethane is heated with sodium in dry ether. How many alkanes form? Name them.
  • 6 What mass of sodium is needed to convert $10.9\ \mathrm{g}$ of bromoethane completely into butane by the Wurtz reaction?
  • 7 How many moles of methane are evolved when $0.20\ \mathrm{mol}$ of ethane-1,2-diol reacts with excess $\mathrm{CH_{3}MgI}$?
  • 8 Why must a Grignard reagent be prepared in dry ether, and what happens to $\mathrm{C_{2}H_{5}MgBr}$ in moist air?
1 Major but-2-ene (mainly trans), minor but-1-ene: Saytzeff — the alkene with two alkyl groups on C=C is more stable than the one with one.
2 3-Methylbut-1-ene and 2-methylbut-2-ene: 2.
3 Pent-1-ene, (E)-pent-2-ene and (Z)-pent-2-ene: 3.
4 1-Bromobutane (only but-1-ene) and 2-bromo-2-methylpropane (only 2-methylpropene) each give a single alkene; 2-bromobutane gives three.
5 Ethane, butane ($\mathrm{CH_{3}{-}C_{3}H_{7}}$) and hexane: 3.
6 $n(\mathrm{C_{2}H_{5}Br})=10.9/109=0.100\ \mathrm{mol}$; $\mathrm{2RX+2Na}$: $0.100\ \mathrm{mol}$ Na $=2.3\ \mathrm{g}$.
7 Two O–H per molecule: $2\times0.20=0.40\ \mathrm{mol}$.
8 Water (any active H) protonates the carbanion-like carbon: $\mathrm{C_{2}H_{5}MgBr+H_{2}O\rightarrow C_{2}H_{6}+Mg(OH)Br}$; ether also stabilises the reagent by coordinating to Mg.
IV
Haloarenes and polyhalogen compounds.
  • 1 Label (1) chlorobenzene, (2) 1-chloro-2,4-dinitrobenzene, (3) 1-chloro-4-nitrobenzene, (4) 1-chloro-3-nitrobenzene. Give the order of reactivity towards aqueous NaOH (fastest first) as a code.
  • 2 Give the products of nitration of chlorobenzene and say which is major and why.
  • 3 Explain why chlorine is deactivating yet ortho/para-directing in electrophilic substitution.
  • 4 Chlorobenzene reacts with ethanoyl chloride and anhydrous $\mathrm{AlCl_{3}}$. Name the major product and find its molar mass.
  • 5 What mass of phosgene could form if $23.9\ \mathrm{g}$ of chloroform were completely oxidised by air in light?
  • 6 Calculate the percentage by mass of iodine in iodoform, and explain where its antiseptic action comes from.
  • 7 Write the two chain steps by which chlorine atoms from freons destroy ozone, and explain why the effect is so large.
  • 8 Find the molar mass of DDT, $\mathrm{C_{14}H_{9}Cl_{5}}$, and give two reasons for its persistence in food chains.
1 Two o/p nitro groups (2) $\gt$ one para nitro (3) $\gt$ meta nitro, only $-I$ help (4) $\gt$ chlorobenzene (1): 2341.
2 1-Chloro-4-nitrobenzene (major) and 1-chloro-2-nitrobenzene; Cl directs o/p by $+R$ and the para position is less hindered.
3 $-I$ lowers electron density in the whole ring (slower than benzene); $+R$ raises it at o/p positions and stabilises the o/p arenium ions, so substitution goes there.
4 1-(4-Chlorophenyl)ethan-1-one, $\mathrm{ClC_{6}H_{4}COCH_{3}}$, $\mathrm{C_{8}H_{7}ClO}$: $96+7+35.5+16=154.5\ \mathrm{g\,mol^{-1}}$.
5 $n(\mathrm{CHCl_{3}})=23.9/119.5=0.200\ \mathrm{mol}$ → $0.200\ \mathrm{mol}\ \mathrm{COCl_{2}}$ ($M=99$): $19.8\ \mathrm{g}$.
6 $M=12+1+381=394$; $\%\mathrm{I}=381/394\times100=96.7\,\%$. The free iodine it liberates is the antiseptic.
7 $\mathrm{Cl^{\bullet}+O_{3}\rightarrow ClO^{\bullet}+O_{2}}$; $\ \mathrm{ClO^{\bullet}+O\rightarrow Cl^{\bullet}+O_{2}}$. Chlorine is regenerated, so each atom destroys a great many ozone molecules before it is trapped.
8 $14\times12+9+5\times35.5=354.5\ \mathrm{g\,mol^{-1}}$. It is not biodegradable, and it is fat-soluble, so it accumulates in fatty tissue (biomagnification).
🎯 Exam corner NEET · MCQ

Six original problems in the NEET style — one correct option each, marked $+4$ / $-1$ / $0$. Aim for about a minute per problem. Run the same three checks every time: what kind of carbon carries X, what the reagent is (strong or weak nucleophile, base, metal) and what the solvent is (aqueous, alcoholic, dry ether). The product, the mechanism and the stereochemistry follow from those.

E1. NEET · MCQ The energy profile below belongs to a nucleophilic substitution of an alkyl halide. Which statement about the reaction is correct? (A) It is the reaction of $\mathrm{CH_{3}Br}$ with $\mathrm{OH^{-}}$ in acetone, and its rate depends on $[\mathrm{OH^{-}}]$ (B) It is the hydrolysis of $\mathrm{(CH_{3})_{3}CBr}$ in water; rate $=k[\mathrm{(CH_{3})_{3}CBr}]$ and the species at the energy minimum M is planar (C) The second hump is the slow step, so the rate depends on the concentration of the nucleophile (D) It has a single transition state in which carbon is partly bonded to both the nucleophile and the halogen energy reaction coordinate TS 1TS 2 M reactantsproducts

Read the profile Two humps with a minimum between them: a two-step reaction with an intermediate. That is SN1 (Definition 16.7); SN2 has one hump and no intermediate, which removes (A) and (D).
Which step is slow? The first hump is higher: ionisation of the C–Br bond is rate-determining, so only $[\mathrm{R{-}X}]$ appears in the rate law — (C) is wrong. M is the tertiary carbocation $\mathrm{(CH_{3})_{3}C^{+}}$, $sp^{2}$ and planar.
Answer (B).
⏱ Shortcut Count humps: one → SN2, two → SN1. The higher hump is the slow step; for SN1 it is always the first one, the loss of $\mathrm{X^{-}}$.

E2. NEET · MCQ Given below are two statements. Statement I: Optically active 2-bromobutane reacts with hydroxide ion by the SN2 mechanism to give butan-2-ol with inverted configuration. Statement II: SN1 hydrolysis of an optically active tertiary halide gives a product with little or no optical activity, because the carbocation intermediate is planar. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true

Statement I True. Back-side attack flips the three other groups — Walden inversion; the product is a single enantiomer and stays optically active (Definition 16.6).
Statement II True. The planar cation is attacked from both faces almost equally, so a nearly racemic mixture forms (Definition 16.7).
Answer (A).
⏱ Shortcut SN2 ↔ inversion, SN1 ↔ racemisation. A statement that pairs them the other way round is the false one; here both are paired correctly.

E3. NEET · MCQ Assertion (A): Chlorobenzene is much less reactive than chloroethane towards nucleophilic substitution. Reason (R): The chlorine atom of chlorobenzene directs an incoming electrophile to the ortho and para positions. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Assertion True: partial double-bond character, an $sp^{2}$ carbon, an unstable phenyl cation and repulsion by the π cloud all hinder substitution (Rule 16.2).
Reason and link True: the $+R$ effect of Cl raises electron density at the o/p carbons (Rule 16.10). But it describes electrophilic substitution in the ring, not why the C–Cl bond resists a nucleophile.
Answer (B).
⏱ Shortcut Check whether A and R speak about the same kind of reaction. "Nucleophile attacks C–Cl" and "electrophile attacks the ring" are different questions, so R cannot be the explanation.

E4. NEET · MCQ Match List-I (reactants) with List-II (main organic product).
List-I: P. $\mathrm{2CH_{3}Br+2Na}$, dry ether · Q. $\mathrm{C_{6}H_{5}Cl+CH_{3}Cl+2Na}$, dry ether · R. $\mathrm{2C_{6}H_{5}Cl+2Na}$, dry ether · S. $\mathrm{CH_{3}MgBr+H_{2}O}$
List-II: I. biphenyl · II. methane · III. toluene · IV. ethane
Choose the correct answer. (A) P-IV, Q-I, R-III, S-II (B) P-II, Q-III, R-I, S-IV (C) P-IV, Q-III, R-I, S-II (D) P-IV, Q-III, R-II, S-I

P, Q, R Sodium joins the two groups: Wurtz, $\mathrm{CH_{3}{-}CH_{3}}$, ethane (IV); Wurtz–Fittig, $\mathrm{C_{6}H_{5}{-}CH_{3}}$, toluene (III); Fittig, $\mathrm{C_{6}H_{5}{-}C_{6}H_{5}}$, biphenyl (I).
S Water protonates the carbanion-like carbon of the Grignard reagent: $\mathrm{CH_{3}MgBr+H_{2}O\rightarrow CH_{4}+Mg(OH)Br}$, methane (II) (Definition 16.9).
Answer (C) P-IV, Q-III, R-I, S-II.
⏱ Shortcut S-II is the giveaway (no new C–C bond, so the alkane has the Grignard's own carbon count) — that alone leaves (A) and (C); then two aryl groups must give biphenyl, R-I.

E5. NEET · MCQ How many of the following statements are correct? (i) Chloroform is stored in dark-coloured bottles filled to the brim. (ii) The antiseptic action of iodoform is due to iodoform itself. (iii) Freons are harmful mainly because they are toxic and flammable at ground level. (iv) DDT is fat-soluble and is not biodegradable, so it accumulates along food chains. (v) In the stratosphere the chlorine atom released from a CFC is regenerated in the chain that destroys ozone. (vi) Tetrachloromethane is a non-polar, non-flammable liquid that was once used in fire extinguishers. (vii) Exposure to dichloromethane has no effect on the human central nervous system. (A) $3$ (B) $5$ (C) $2$ (D) $4$

Correct (i) Light and air would turn it into phosgene. (iv) Biomagnification. (v) $\mathrm{Cl^{\bullet}+O_{3}\rightarrow ClO^{\bullet}+O_{2}}$, then $\mathrm{ClO^{\bullet}+O\rightarrow Cl^{\bullet}+O_{2}}$. (vi) Its four C–Cl dipoles cancel, and it does not burn.
Wrong (ii) The action is due to the iodine it releases. (iii) Freons are non-toxic and non-flammable; their harm is to the ozone layer. (vii) High exposure causes dizziness and impaired hearing and vision.
Answer (D) $4$ — statements (i), (iv), (v) and (vi).
⏱ Shortcut Each polyhalogen compound has one "headline" fact (chloroform–phosgene, iodoform–liberated iodine, freons–ozone, DDT–fat and food chains). A statement that contradicts the headline is false.

E6. NEET · MCQ Arrange in decreasing order of reactivity towards aqueous sodium hydroxide: I. chlorobenzene · II. 1-chloro-4-nitrobenzene · III. 1-chloro-2,4-dinitrobenzene · IV. 1-chloro-3-nitrobenzene. (A) III $\gt$ II $\gt$ IV $\gt$ I (B) III $\gt$ IV $\gt$ II $\gt$ I (C) II $\gt$ III $\gt$ IV $\gt$ I (D) I $\gt$ IV $\gt$ II $\gt$ III

Idea The nucleophile adds first and the ring carries a negative charge at the ortho and para carbons. A nitro group at an o/p position takes that charge onto its oxygens by resonance; each extra o/p nitro group helps more (Rule 16.10).
Rank III (two o/p nitro groups, about $368\ \mathrm{K}$) $\gt$ II (one para nitro, about $443\ \mathrm{K}$) $\gt$ IV (meta nitro: only a $-I$ effect) $\gt$ I (about $623\ \mathrm{K}$ and high pressure).
Answer (A).
⏱ Shortcut Chlorobenzene must be last, which removes (D); a meta nitro group cannot beat a para one, which removes (B); two nitro groups beat one, which removes (C).
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. How strongly does the polarity of the solvent control the rate of an SN1 reaction?

Why it matters. Pharmaceutical and fine-chemical plants choose solvents to speed up the step they want and slow down the side reactions; green-chemistry programmes now try to replace chlorinated solvents with water-rich mixtures. The hydrolysis of 2-chloro-2-methylpropane is the classic test case used to build solvent-polarity scales.

What to do.

  1. Prepare propanone–water mixtures with 50, 60 and 70 % propanone by volume, each containing a few drops of bromothymol blue and a fixed small amount of dilute NaOH (enough to neutralise about 10 % of the halide).
  2. Add a fixed amount of 2-chloro-2-methylpropane and time how long the colour takes to change from blue to yellow, as HCl formed by $\mathrm{(CH_{3})_{3}CCl+H_{2}O\rightarrow(CH_{3})_{3}COH+HCl}$ uses up the NaOH.
  3. Repeat each mixture twice. Since the same fraction reacts each time, $k\propto1/t$.
  4. Plot $\ln(1/t)$ against the percentage of water. Repeat one mixture with double the NaOH-free halide concentration and show that the time for the same fraction of reaction does not change (first order).

Tools: Burettes or graduated pipettes, a stopwatch, bromothymol blue, propanone, a fume cupboard, a spreadsheet.

Hand in: Your table of times, the plot, the factor by which $k$ changes per 10 % more water, and a paragraph linking it to the solvation of the carbocation and chloride ion.

Going further. Does adding sodium hydroxide at higher concentration change the rate? Does warming by 10 K change it more or less than adding 10 % water? What would you expect for 1-chlorobutane under the same conditions?

Instructor note: with 2-chloro-2-methylpropane the rate typically rises by a factor of about 3–5 for each extra 10 % of water in this range; times of tens of seconds to a few minutes are convenient. Work in a fume cupboard; keep the halide away from flames.

🧪 Self-check quiz

0/5 correct

Q1. Which reagent converts 1-bromopropane mainly into 1-nitropropane, $\mathrm{CH_{3}CH_{2}CH_{2}NO_{2}}$?

Q2. Which bromide is hydrolysed fastest by the SN1 mechanism in aqueous ethanol?

Q3. For the SN2 reaction $\mathrm{CH_{3}Br+OH^{-}\rightarrow CH_{3}OH+Br^{-}}$, the concentration of $\mathrm{CH_{3}Br}$ is halved and that of $\mathrm{OH^{-}}$ is doubled. The rate

Q4. Which bromide gives only one alkene — with no structural or geometrical isomers — when heated with alcoholic KOH?

Q5. In electrophilic substitution reactions of chlorobenzene, the chlorine atom is