Chapter 20 · Introduction

Chapter 20 — Principles Related to Practical Chemistry

The bench chemistry that NEET tests: test-tube reactions that reveal elements and functional groups, the preparation of six classic compounds, titrations that turn a colour change into a concentration, the group scheme that identifies an unknown salt, and four physical-chemistry experiments — calorimetry, sols and an iodine clock.

A water-testing kit, a blood-glucose strip and the laboratory that certifies the iron content of a fortified flour all do what this chapter teaches. A pharmacist checks a batch of tablets by titration; a jeweller's acid test and a forensic spot test are qualitative analysis; a food laboratory measures the energy in a sample with a calorimeter. In a school or college laboratory the same ideas appear on a smaller scale: a drop of neutral iron(III) chloride turns violet with a phenol, a silver mirror forms on the wall of a warm test tube, the pink of permanganate lingers for thirty seconds and the titration is over, a black precipitate in acid tells you the salt contains copper, and a flask of colourless liquid turns suddenly blue-black after exactly forty seconds.

NEET asks about these experiments directly — in "which reagent distinguishes", "what is observed", "why is this precaution taken", match-the-lists of reagents and colours, and short titration or calorimetry calculations — so the chapter treats each one as chemistry, not as a recipe. Section 20.1 starts with the detection of N, S and halogens in the sodium fusion extract and the tests for the hydroxyl, carbonyl, carboxyl and amino groups, then explains the preparation of Mohr's salt, potash alum, acetanilide, p-nitroacetanilide, aniline yellow and iodoform. Section 20.2 covers titrimetric analysis — standard solutions, acid–base indicators and the self-indicating permanganate titrations of oxalic acid and Mohr's salt — and qualitative salt analysis: the anion tests and the cation groups, explained by solubility products and the common-ion effect. Section 20.3 works through the enthalpy of solution of copper(II) sulphate, the enthalpy of neutralisation of a strong acid by a strong base, the preparation of lyophilic and lyophobic sols, and the kinetics of the iodide–hydrogen peroxide reaction followed by an iodine clock.

Sodium fusion: N, S, X→–OH, C=O, –COOH, –NH₂ tests→Six preparations→Standard solutions & indicators→$\mathrm{KMnO_{4}}$ titrations→Anion tests→Cation groups 0–VI→$q=(m+W)\,c\,\Delta T$→Lyophilic & lyophobic sols→Iodine clock
🎯 By the end of this chapter you can…
  • detect nitrogen, sulphur and halogens in an organic compound from the tests on its sodium fusion extract, and explain each colour or precipitate;
  • identify alcoholic and phenolic –OH, aldehydes and ketones, carboxylic acids and primary amino groups with the standard test-tube reactions, and plan the shortest set of tests for an unknown;
  • explain the principle, the key precautions and the yield calculation of the preparations of Mohr's salt, potash alum, acetanilide, p-nitroacetanilide, aniline yellow and iodoform;
  • prepare a standard solution, choose the right indicator for an acid–base titration, and solve titration problems with $\dfrac{M_{A}V_{A}}{a}=\dfrac{M_{B}V_{B}}{b}$;
  • explain why $\mathrm{KMnO_{4}}$ is its own indicator, why the titration is done in dilute sulphuric acid and why oxalic acid is warmed, and calculate the results of oxalic acid and Mohr's salt titrations;
  • identify the anions and cations of the NEET list from their preliminary, group and confirmatory tests, and explain the group scheme with $K_{sp}$ and the common-ion effect;
  • calculate enthalpies of solution and neutralisation from calorimeter readings, including the water equivalent and the limiting reagent;
  • prepare and distinguish lyophilic and lyophobic sols, and find rates and orders of the iodide–hydrogen peroxide reaction from clock times;
  • solve NEET-style MCQs on practical chemistry — including statement, assertion–reason, matching, “how many” and graph-reading formats — at the NEET pace of about a minute per question, eliminating options where that is faster than solving.

$20.0\ \mathrm{mL}$ of $0.100\ \mathrm{M}$ ethanoic acid is titrated with $0.100\ \mathrm{M}$ NaOH, using methyl orange as the indicator. When does the methyl orange change colour?

Choose ethanoic acid and methyl orange: the readouts show that the pH passes through the range $3.1$–$4.4$ between $0.29$ and $6.26\ \mathrm{mL}$, while the equivalence point is at $20.00\ \mathrm{mL}$, pH $8.72$. Ethanoic acid is weak, so the solution at equivalence (sodium ethanoate) is basic and the pH rises slowly through the acid region as a buffer forms. Switch to phenolphthalein: its range $8.3$–$10.0$ is crossed between $20.00$ and $20.04\ \mathrm{mL}$ — on the steep jump, so it marks the end point correctly (Section 20.2).
Teaser — Choosing the Indicator

The flask holds $20.0\ \mathrm{mL}$ of a $0.100\ \mathrm{M}$ acid or base; the burette adds $0.100\ \mathrm{M}$ NaOH (to the acids) or HCl (to ammonia), so the equivalence point is at $20.00\ \mathrm{mL}$. The curve is the pH calculated exactly at every volume ($\mathrm{p}K_{a}$ of ethanoic acid $4.74$, $\mathrm{p}K_{b}$ of ammonia $4.74$, 298 K); the shaded band is the colour-change range of the indicator. Drag the volume or press Play to titrate, and watch the flask.

10.0 mL
pH in the flask—
indicator changes over—
equivalence point—

Sections in this chapter

🎯 Chapter mixed test NEET · MCQ

Eight original NEET-style problems drawn from all three sections and shuffled, as in the real paper; the last one needs two sections at once. Answer each one and press Submit ($+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test to sit them in one go. In NEET you have about one minute per question on average, so the target here is eight minutes. For every observation ask which species causes it; for every calculation fix the mole ratio before you look at the options. (Molar mass of Mohr's salt $392\ \mathrm{g\,mol^{-1}}$.)

E1. NEET · MCQ Which one of the following tests distinguishes ethanol from phenol? (A) adding a small piece of sodium (B) adding neutral iron(III) chloride solution (C) adding aqueous sodium hydrogencarbonate (D) Lassaigne's test

Each test Sodium: both have an O–H and both give hydrogen. $\mathrm{NaHCO_{3}}$: neither is acidic enough to release $\mathrm{CO_{2}}$. Lassaigne's test: neither contains N, S or a halogen. Neutral $\mathrm{FeCl_{3}}$: phenol violet, ethanol no colour (Section 20.1).
Answer (B).
⏱ Shortcut A test distinguishes two compounds only if it is positive for exactly one of them — check both compounds against each option.

E2. NEET · MCQ $25.0$ mL of $0.050\ \mathrm{M}$ oxalic acid is titrated with $0.10\ \mathrm{M}$ NaOH using phenolphthalein. The volume of NaOH at the end point is (A) $12.5$ mL (B) $50.0$ mL (C) $25.0$ mL (D) $6.25$ mL

Moles Oxalic acid: $25.0\times0.050=1.25$ mmol. It is diprotic, $\mathrm{H_{2}C_{2}O_{4}+2\,NaOH\rightarrow Na_{2}C_{2}O_{4}+2\,H_{2}O}$, so NaOH $=2.50$ mmol.
Volume $\tfrac{2.50}{0.10}=25.0$ mL (Section 20.2).
Answer (C).
⏱ Shortcut (A) forgets that oxalic acid has two acidic hydrogens.

E3. NEET · MCQ Given below are two statements. Statement I: The enthalpy of neutralisation of sulphuric acid by sodium hydroxide is $-114.2\ \mathrm{kJ}$ per mole of water formed. Statement II: The enthalpy of neutralisation of any strong acid by any strong base in dilute solution is about $-57.1\ \mathrm{kJ}$ per mole of water formed. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true

Statement I False: $114.2$ kJ is released per mole of $\mathrm{H_{2}SO_{4}}$, which forms two moles of water; per mole of water it is still $-57.1\ \mathrm{kJ}$.
Statement II True: the net reaction is always $\mathrm{H^{+}(aq)+OH^{-}(aq)\rightarrow H_{2}O(l)}$ (Section 20.3).
Answer (D).

E4. NEET · MCQ Match List-I (anion) with List-II (test). List-I: (a) $\mathrm{NO_{3}^{-}}$ (b) $\mathrm{S^{2-}}$ (c) $\mathrm{Cl^{-}}$ (d) $\mathrm{CO_{3}^{2-}}$. List-II: (i) orange-red vapours on heating with $\mathrm{K_{2}Cr_{2}O_{7}}$ and concentrated $\mathrm{H_{2}SO_{4}}$ (ii) a brown ring with iron(II) sulphate and concentrated $\mathrm{H_{2}SO_{4}}$ (iii) a gas from dilute $\mathrm{H_{2}SO_{4}}$ that turns lime water milky (iv) a violet colour with sodium nitroprusside. Choose the correct option. (A) a-ii, b-iv, c-i, d-iii (B) a-ii, b-iii, c-i, d-iv (C) a-i, b-iv, c-ii, d-iii (D) a-iv, b-ii, c-i, d-iii

Each anion Nitrate: brown ring, $\mathrm{[Fe(H_{2}O)_{5}(NO)]^{2+}}$ (ii). Sulphide: $\mathrm{[Fe(CN)_{5}NOS]^{4-}}$, violet (iv). Chloride: chromyl chloride, $\mathrm{CrO_{2}Cl_{2}}$ (i). Carbonate: $\mathrm{CO_{2}}$ (iii) (Section 20.2).
Answer (A) a-ii, b-iv, c-i, d-iii.
⏱ Shortcut a-ii leaves (A) and (B); a sulphide gives no gas that turns lime water milky, so b-iv.

E5. NEET · MCQ Assertion (A): Ethanal and propanone can be distinguished with Tollens' reagent. Reason (R): Both ethanal and propanone give an orange precipitate with 2,4-dinitrophenylhydrazine. Choose the correct answer. (A) Both A and R are true, and R is the correct explanation of A (B) Both A and R are true, but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Assertion True: ethanal gives a silver mirror; propanone, a ketone, does not.
Reason True — both have a $\mathrm{C{=}O}$ group — but a test that is positive for both cannot be the reason they can be told apart. The real reason is that only the aldehyde is easily oxidised (Section 20.1).
Answer (B).

E6. NEET · MCQ In iodine-clock runs of the iodide–hydrogen peroxide reaction (same thiosulphate, $[\mathrm{H_{2}O_{2}}]_{0}$, total volume and temperature), the reciprocal of the clock time was plotted against $[\mathrm{I^{-}}]_{0}$, as shown. The clock time expected for $[\mathrm{I^{-}}]_{0}=0.050\ \mathrm{mol\,L^{-1}}$ is (A) $25$ s (B) $50$ s (C) $40$ s (D) $0.025$ s00.020.040.060.080.1000.010.020.030.040.05[I⁻]₀ / mol L⁻¹1/t / s⁻¹

Read the line The points lie on a straight line through the origin with slope $\tfrac{0.040}{0.080}=0.50\ \mathrm{L\,mol^{-1}\,s^{-1}}$: $1/t\propto[\mathrm{I^{-}}]_{0}$, so the reaction is first order in iodide (Section 20.3). At $0.050\ \mathrm{mol\,L^{-1}}$, $1/t=0.025\ \mathrm{s^{-1}}$.
Invert $t=\tfrac{1}{0.025}=40$ s.
Answer (C).
⏱ Shortcut $0.050$ is $\tfrac{5}{4}$ of $0.040$, where $t=50$ s, so $t=50\times\tfrac45=40$ s. Option (D) forgets to invert $1/t$.

E7. NEET · MCQ How many of the following statements about the laboratory preparations are correct? (i) Mohr's salt, $\mathrm{FeSO_{4}\cdot(NH_{4})_{2}SO_{4}\cdot6H_{2}O}$, forms pale green crystals. (ii) Potash alum contains 24 molecules of water of crystallisation per $\mathrm{K_{2}SO_{4}\cdot Al_{2}(SO_{4})_{3}}$. (iii) Acetanilide is prepared by nitrating aniline. (iv) In the preparation of p-nitroacetanilide the temperature is kept below about 10 °C. (v) Aniline yellow is 4-hydroxyazobenzene. (vi) A little dilute $\mathrm{H_{2}SO_{4}}$ is added while preparing potash alum to suppress the hydrolysis of $\mathrm{Al^{3+}}$. (A) $3$ (B) $5$ (C) $2$ (D) $4$

True (i), (ii), (iv), (vi) (Section 20.1).
False (iii) — acetanilide is made by acetylating aniline with ethanoic anhydride; nitration comes afterwards. (v) — aniline yellow is 4-aminoazobenzene; the hydroxy compound would need phenol as the coupling partner.
Answer (D) $4$.

E8. NEET · MCQ A student prepares Mohr's salt and checks the dried crystals by titration: $0.784$ g of them, dissolved in dilute $\mathrm{H_{2}SO_{4}}$, needs $18.0$ mL of $0.0200\ \mathrm{M}$ $\mathrm{KMnO_{4}}$. The percentage of the crystals that is still unoxidised Mohr's salt is (A) $18.0\%$ (B) $90.0\%$ (C) $45.0\%$ (D) $36.0\%$

Titration (Section 20.2) $n(\mathrm{MnO_{4}^{-}})=18.0\times0.0200=0.360$ mmol; $\ n(\mathrm{Fe^{2+}})=5\times0.360=1.80$ mmol.
Preparation (Section 20.1) One formula unit of Mohr's salt carries one $\mathrm{Fe^{2+}}$: $1.80\times392=706$ mg, so $\tfrac{0.706}{0.784}\times100=90.0\%$. The rest was oxidised to iron(III) — for instance by heating the solution too long — which permanganate cannot titrate.
Answer (B).
⏱ Shortcut (A) takes $\mathrm{MnO_{4}^{-}:Fe^{2+}=1:1}$, and (C) borrows the oxalate ratio ($\tfrac52$ instead of $5$). Fix the ratio first and the arithmetic is two lines.
✅ Before you start
The sodium fusion (Lassaigne) tests were introduced in Section 13.2. The functional-group tests and the organic preparations use the chemistry of alcohols, phenols and carbonyl compounds (Sections 17.1–17.4), amines and diazonium salts (Section 18.1, Section 18.2) and electrophilic substitution (Section 15.4). Titrations need molarity (Section 5.1), stoichiometry (Section 1.3), balanced redox equations (Section 7.1) and the chemistry of permanganate (Section 11.2); indicators and salt analysis rest on pH, $K_{sp}$ and the common-ion effect (Section 6.3, Section 6.4) and on complex ions (Section 12.1). The physical experiments use enthalpy changes (Section 4.2) and rate laws and initial rates (Section 8.1).