Chapter 9 · Classification of Elements and Periodicity in Properties

9.1 The Modern Periodic Law and the Periodic Table

Arrange the elements in order of atomic number and their properties repeat at regular intervals — the modern periodic law. The long form of the table is the Aufbau filling order drawn as a map, so an electronic configuration alone tells you an element's period, group and block.

Chemists know 118 elements. Learning the chemistry of each one separately would be hopeless — but nobody has to, because the elements fall into families. Lithium, sodium and potassium are soft metals that fizz in water and form $\mathrm{MCl}$ chlorides; fluorine, chlorine and bromine are coloured, poisonous non-metals that form $\mathrm{HX}$ acids; helium, neon and argon hardly react at all. The periodic table arranges the elements so that such families stand in the same column, and so that the gradual change of properties from one family to the next can be read off from left to right.

In this section we see why the table has exactly the shape it has. Its rows and columns are not an arbitrary filing system: they are the order in which electrons fill the orbitals of Section 2.4. Once you see this, you can place any element — even one that has not yet been made — from its atomic number alone, find its period, group and block from its electronic configuration, and give a systematic name to the superheavy elements beyond $Z=100$. The trends in size, ionisation enthalpy and reactivity that follow from this structure are the subject of Section 9.2.

From Mendeleev to the modern periodic law

A short history, for motivation only. By the 1860s about sixty elements were known, and several chemists had noticed repeating patterns. Döbereiner grouped similar elements in threes ("triads", such as Ca, Sr, Ba, in which the middle atomic mass is roughly the mean of the outer two); Newlands noticed that, listed by atomic mass, every eighth element resembled the first ("octaves"). The decisive step was taken in 1869 by Dmitri Mendeleev (and, independently, Lothar Meyer, who plotted physical properties such as atomic volume). Mendeleev stated that the properties of the elements are a periodic function of their atomic masses, and he trusted the chemical families more than the masses: he left gaps for elements still unknown and predicted their properties. His "eka-aluminium" and "eka-silicon" were discovered within twenty years as gallium (1875) and germanium (1886), with densities, atomic masses and oxide formulas very close to his predictions.

Mendeleev's table had a few awkward spots. To keep tellurium with oxygen and sulphur and iodine with the halogens he had to put Te ($127.6\ \mathrm{u}$) before I ($126.9\ \mathrm{u}$), against the order of mass; argon ($39.9$) has to come before potassium ($39.1$), and cobalt ($58.9$) before nickel ($58.7$). In 1913 Henry Moseley measured the frequencies of the characteristic X-rays emitted by the elements and found that the square root of the frequency rises in a perfectly straight line with the atomic number $Z$ — the number of protons in the nucleus — and not with the atomic mass. The atomic number, not the mass, is the fundamental property, and with it every awkward spot disappears: $Z(\mathrm{Te})=52\lt Z(\mathrm{I})=53$, $Z(\mathrm{Ar})=18\lt Z(\mathrm{K})=19$.

📐 Law 9.1 — The modern periodic law

The physical and chemical properties of the elements are periodic functions of their atomic numbers: when the elements are arranged in order of increasing atomic number, elements with similar properties recur at regular intervals.

The reason (which Mendeleev could not know) is electronic: the chemistry of an atom is decided mainly by the configuration of its outermost (valence) shell, and as $Z$ increases the same kind of valence configuration — $ns^{1}$, $ns^{2}np^{5}$, $ns^{2}np^{6}$ … — keeps coming back with a larger $n$. Periodicity of properties is periodicity of valence-shell configuration.

The long form of the periodic table, used everywhere today, is built directly on this law. Each element is placed in a box with its atomic number; elements are read in order of $Z$ along the rows, and a new row starts every time a new principal shell begins to fill.

📘 Definition 9.1 — Periods and groups of the long-form table

A period is a horizontal row. There are seven. The period number equals the principal quantum number $n$ of the valence (outermost) shell: period $n$ begins with the element whose new electron enters $ns$ and ends with the noble gas whose $np$ subshell has just been completed (period 1 ends at helium, $1s^{2}$).

A group is a vertical column. There are 18, numbered 1 to 18 from left to right (IUPAC numbering, which replaced the older IA–VIIIA / IB–VIIIB labels). Elements of a group have the same number of electrons in their valence shell, in the same kind of orbitals, and so similar chemistry. Some groups have family names: group 1 the alkali metals, group 2 the alkaline earth metals, group 15 the pnictogens, group 16 the chalcogens, group 17 the halogens, group 18 the noble gases.

Why the periods have 2, 8, 8, 18, 18, 32, 32 elements. A period contains one element for each electron that can enter the subshells filled during it, i.e. twice the number of orbitals in those subshells. Following the Aufbau order $1s\,2s\,2p\,3s\,3p$ $4s\,3d\,4p$ $5s\,4d\,5p$ $6s\,4f\,5d\,6p$ $7s\,5f\,6d\,7p$:

Period ($n$)Subshells filledOrbitalsElementsFrom – to
1$1s$12H ($Z=1$) – He ($2$)
2$2s,\ 2p$$1+3=4$8Li ($3$) – Ne ($10$)
3$3s,\ 3p$$4$8Na ($11$) – Ar ($18$)
4$4s,\ 3d,\ 4p$$1+5+3=9$18K ($19$) – Kr ($36$)
5$5s,\ 4d,\ 5p$$9$18Rb ($37$) – Xe ($54$)
6$6s,\ 4f,\ 5d,\ 6p$$1+7+5+3=16$32Cs ($55$) – Rn ($86$)
7$7s,\ 5f,\ 6d,\ 7p$$16$32Fr ($87$) – Og ($118$)

Period 3 has only 8 elements although the third shell can hold 18: the $3d$ orbitals lie above $4s$ in energy, so they fill only in period 4, after potassium and calcium. Likewise the $4f$ orbitals fill in period 6. To keep the table a convenient width, the 14 elements of each $f$ series (lanthanoids in period 6, actinoids in period 7) are printed in two separate rows at the foot of the table; they really belong inside periods 6 and 7, after lanthanum and actinium in group 3.

✏️ Example 1 — The atomic numbers of the noble gases
(a) Using the number of elements in each period, find the atomic numbers of all the noble gases. (b) Which period does the element with $Z=50$ belong to, and how many elements come before it in that period? (c) The elements of a hypothetical eighth period would fill $8s$, then a new $5g$ subshell ($l=4$), then $6f$, $7d$ and $8p$. How many elements would period 8 contain?
(a) Each noble gas ends a period, so its $Z$ is the running total: $2$; $2+8=10$; $10+8=18$; $18+18=36$; $36+18=54$; $54+32=86$; $86+32=118$. These are He, Ne, Ar, Kr, Xe, Rn and Og.
(b) $36\lt 50\le 54$, so $Z=50$ is in period 5 (it is tin). It is the $50-36=14$th element of that period, so 13 elements of period 5 come before it.
(c) Orbitals: $8s$ (1) $+\ 5g$ ($2l+1=9$) $+\ 6f$ (7) $+\ 7d$ (5) $+\ 8p$ (3) $=25$; two electrons each gives $50$ elements.
Check The same rule reproduces the known periods: $2\times(1+3)=8$ and $2\times(1+7+5+3)=32$. The noble-gas atomic numbers are worth memorising — they are the fastest way to place any element (Rule 9.2).

Mendeleev placed tellurium (atomic mass $127.6$) before iodine ($126.9$), against the order of atomic mass. In the modern periodic table this order is

Electronic configuration and the s, p, d and f blocks

Read the long-form table with the Aufbau order in mind and it splits into four rectangular regions. In each region the electron that distinguishes an element from the one before it (the differentiating electron) enters the same type of subshell.

📘 Definition 9.2 — Blocks; representative, transition and inner transition elements

The block of an element is the type of subshell ($s$, $p$, $d$ or $f$) into which its differentiating electron enters in the Aufbau order.

  • s-block: groups 1 and 2; valence configuration $ns^{1}$ or $ns^{2}$. (Helium, $1s^{2}$, is an s-configuration but is placed in group 18 because its shell is complete.)
  • p-block: groups 13 to 18; valence configuration $ns^{2}np^{1}$ to $ns^{2}np^{6}$.
  • d-block: groups 3 to 12; general configuration $(n-1)d^{1-10}\,ns^{0-2}$ (usually $ns^{2}$; $ns^{1}$ in Cr, Cu and some heavier elements; $5s^{0}$ in Pd). Four series: $3d$ (Sc–Zn), $4d$ (Y–Cd), $5d$ (La, Hf–Hg), $6d$ (Ac, Rf–Cn).
  • f-block: the two rows printed below the table — the lanthanoids Ce–Lu ($Z=58$–$71$, filling $4f$) and the actinoids Th–Lr ($Z=90$–$103$, filling $5f$); general configuration $(n-2)f^{1-14}\,(n-1)d^{0-1}\,ns^{2}$.

The s- and p-block elements together are the representative (main-group) elements; the d-block elements are the transition elements and the f-block elements the inner transition elements. The noble gases ($ns^{2}np^{6}$, and He $1s^{2}$) close each period.

How the blocks behave. The block is a strong hint about chemistry, because it tells you what kind of electrons are available for bonding:

Hydrogen ($1s^{1}$) has one valence electron like the alkali metals but is also one electron short of a noble-gas shell, like the halogens; it forms $\mathrm{H^{+}}$ (in water, $\mathrm{H_{3}O^{+}}$) as well as the hydride ion $\mathrm{H^{-}}$ and is a diatomic non-metal gas. It is usually printed at the top of group 1, but it is really a family of its own.

✏️ Example 2 — Configurations and blocks
Write the ground-state electronic configurations of the elements with $Z=20,\ 26,\ 33$ and $64$, and name the block of each. For $Z=64$ use the fact that a half-filled $4f$ subshell is especially stable.
Z = 20 Ca: $\mathrm{[Ar]}\,4s^{2}$. The last electron enters $4s$: s-block (group 2).
Z = 26 Fe: after $\mathrm{[Ar]}\,4s^{2}$ the next six electrons enter $3d$: $\mathrm{[Ar]}\,3d^{6}4s^{2}$. d-block (written in order of $n$, the $3d$ before $4s$, though it fills after it).
Z = 33 As: $\mathrm{[Ar]}\,3d^{10}4s^{2}4p^{3}$. The last electron enters $4p$: p-block. The full $3d^{10}$ is part of the core and does not change the block.
Z = 64 Gd: Aufbau would give $\mathrm{[Xe]}\,4f^{8}6s^{2}$, but the real ground state keeps a half-filled $4f^{7}$ and puts one electron in $5d$: $\mathrm{[Xe]}\,4f^{7}5d^{1}6s^{2}$. Gadolinium lies in the lanthanoid row: f-block.
Check Electron counts: $18+2=20$; $18+6+2=26$; $18+10+2+3=33$; $54+7+1+2=64$ ✓.

In the table builder, slide $Z$ from $20$ (calcium) to $21$ (scandium). Where does the new electron go, and in which block does the new cell light up?

At $Z=21$ the readouts show element Sc ($Z = 21$), configuration $\mathrm{[Ar]}\ 3d^{1}\,4s^{2}$, period 4 and "3 · d-block"; the new cell is green, the d-block colour, in column 3. The $4s$ subshell was completed at calcium, and $3d$ lies below $4p$ in energy, so the next ten electrons (Sc to Zn) enter $3d$ — that is why ten d-block columns open up between groups 2 and 13 from period 4 onwards. Keep going: at $Z=31$ (Ga) the electron finally enters $4p$ and the cell is in group 13. Press Play to watch whole periods fill block by block.
Interactive 1 — Building the Periodic Table Electron by Electron

Move the slider to add protons and electrons one at a time (or press Play). Each new element lights up in the colour of the subshell its differentiating electron enters — red $s$, blue $p$, green $d$, purple $f$ — and the ground-state configuration is shown underneath. Watch where each period ends and why the d-block opens in period 4 and the f-rows in period 6. Known exceptions to the Aufbau order (Cr, Cu, Pd, Gd …) are flagged.

26
element—
configuration—
period—
group · block—

Zinc has the configuration $\mathrm{[Ar]}\,3d^{10}4s^{2}$; its outermost shell holds only $4s$ electrons. Zinc belongs to the

Locating an element; names for elements beyond Z = 100

Because the table is the Aufbau order, the position of an element can be read straight off its configuration — or, even faster, off its atomic number.

📐 Rule 9.2 — Period, block and group from the configuration

For an element with ground-state configuration written out in full:

  1. Period $=$ the principal quantum number $n$ of the valence shell (the largest $n$ in the configuration; for palladium, $\mathrm{[Kr]}\,4d^{10}$, it is the period in which the $5s$ subshell is being filled, i.e. 5).
  2. Block $=$ the subshell receiving the differentiating electron.
  3. Group:
    • s-block: group $=$ number of $ns$ electrons (1 or 2);
    • d-block: group $=$ number of $(n-1)d$ electrons $+$ number of $ns$ electrons;
    • p-block: group $=10+$ number of $ns$ electrons $+$ number of $np$ electrons $=12+$ number of $np$ electrons;
    • f-block: the lanthanoids and actinoids are placed with group 3 (in the separate rows).

From the atomic number. Find the noble gases on either side: if $Z_\text{prev}\lt Z\le Z_\text{next}$, the element is in the period that ends at $Z_\text{next}$, and it is the $k$th element of that period with $k=Z-Z_\text{prev}$. Then group $=k$ for $k\le2$; group $=k+10$ for $k\ge3$ in periods 2 and 3; group $=k$ in periods 4 and 5; and in periods 6 and 7, group $=3$ for $k=3$, f-block for $k=4$ to $17$, group $=k-14$ for $k\ge18$.

The d-block rule works even for the "exceptional" configurations: chromium, $\mathrm{[Ar]}\,3d^{5}4s^{1}$, and the configuration Aufbau would predict, $3d^{4}4s^{2}$, both give $5+1=4+2=6$. Only the total of $(n-1)d$ and $ns$ electrons matters.

🧭 Problem-solving strategy — Placing an element
  1. Given $Z$: bracket it between noble gases ($2, 10, 18, 36, 54, 86, 118$) to get the period and the position $k$ in the period; convert $k$ to a group with Rule 9.2.
  2. Given a configuration: period from the highest $n$; block from the last subshell filled in the Aufbau order; group from the electron count of that block's rule.
  3. Given period and group (reverse): $Z=Z_\text{prev}+k$, where $k=$ group (s-block, and periods 4–5), $k=$ group $-10$ (p-block of periods 2–3), $k=$ group $+14$ (groups 4–18 of periods 6–7).
  4. Check by counting electrons, and remember the special cases: He (group 18), Pd (period 5 with no $5s$ electron), La/Ac (group 3, d-block).
✏️ Example 3 — Reading the position from the configuration
Find the period, block and group of the elements with these ground-state configurations, and identify each: (a) $1s^{2}2s^{2}2p^{6}3s^{2}3p^{4}$; (b) $\mathrm{[Ar]}\,3d^{5}4s^{1}$; (c) $\mathrm{[Kr]}\,4d^{10}$; (d) $\mathrm{[Xe]}\,4f^{14}5d^{10}6s^{2}6p^{2}$.
Find the group of element (d) before you open the solution:
(a) Highest $n=3$: period 3. Last electron in $3p$: p-block. Group $=10+2+4=16$. $Z=16$: sulphur.
(b) Period 4, d-block, group $=5+1=6$. $Z=18+6=24$: chromium (the half-filled $3d^{5}$ exception).
(c) $Z=36+10=46$: palladium. Its configuration shows no $n=5$ electron, but $Z=46$ lies between Kr (36) and Xe (54), so it is in period 5; d-block, group $=10+0=10$, below nickel.
(d) Period 6, p-block, group $=10+2+2=14$. $Z=54+14+10+4=82$: lead.
Check With $Z$: $46-36=10$ in period 5 gives group 10 ✓; $82-54=28$, and $28-14=14$ in period 6 gives group 14 ✓.
✏️ Example 4 — From position to atomic number
Find the atomic number and the ground-state configuration of the element in (a) period 5, group 15; (b) period 6, group 8; (c) period 4, group 11.
Find the atomic number for (b) first:
(a) Period 5 follows Kr ($36$); groups count directly in periods 4–5: $Z=36+15=51$ (antimony). Configuration $\mathrm{[Kr]}\,4d^{10}5s^{2}5p^{3}$ — group $10+2+3=15$ ✓.
(b) Period 6 follows Xe ($54$); for group 8 add the 14 lanthanoids: $Z=54+8+14=76$ (osmium). Configuration $\mathrm{[Xe]}\,4f^{14}5d^{6}6s^{2}$ — group $6+2=8$ ✓.
(c) $Z=18+11=29$ (copper). Aufbau predicts $3d^{9}4s^{2}$, but the real ground state is $\mathrm{[Ar]}\,3d^{10}4s^{1}$ (a completely filled $3d$). Either way the group is $10+1=9+2=11$.
Check Each element sits below its lighter group-mate: Sb below As ($33$), Os below Ru ($44$), Cu below… nothing — copper heads group 11, with Ag ($47$) and Au ($79$) below it.

Naming the superheavy elements. Elements beyond $Z=100$ are made a few atoms at a time in particle accelerators, and claims of discovery may take years to confirm. Until IUPAC approves a permanent name, an element is known by a systematic (temporary) name built directly from its atomic number.

📐 Rule 9.3 — IUPAC systematic names for elements with Z > 100

Write each digit of $Z$ as a numerical root, in order, and add the ending -ium:

Digit0123456789
Rootnilunbitriquadpenthexseptoctenn
Letternubtqphsoe

The symbol is made of the first letters of the roots, the first one capitalised (three letters for $Z=100$–$999$). Two spellings are trimmed: the final "n" of enn is dropped before nil ("ennil", not "ennnil"), and the final "i" of bi or tri is dropped before -ium ("bium", "trium").

$Z$Systematic nameSymbolApproved name$Z$Systematic nameSymbolApproved name
101UnniluniumUnuMendelevium, Md110UnunniliumUunDarmstadtium, Ds
102UnnilbiumUnbNobelium, No111UnununiumUuuRoentgenium, Rg
103UnniltriumUntLawrencium, Lr112UnunbiumUubCopernicium, Cn
104UnnilquadiumUnqRutherfordium, Rf113UnuntriumUutNihonium, Nh
105UnnilpentiumUnpDubnium, Db114UnunquadiumUuqFlerovium, Fl
106UnnilhexiumUnhSeaborgium, Sg115UnunpentiumUupMoscovium, Mc
107UnnilseptiumUnsBohrium, Bh116UnunhexiumUuhLivermorium, Lv
108UnniloctiumUnoHassium, Hs117UnunseptiumUusTennessine, Ts
109UnnilenniumUneMeitnerium, Mt118UnunoctiumUuoOganesson, Og

All elements up to $Z=118$ now have approved names, and the seventh period is complete. The systematic names are still asked about in NEET, and they are what any element from $Z=119$ onwards will be called first.

✏️ Example 5 — Systematic names, symbols and positions
(a) Give the IUPAC systematic name and symbol of the elements with $Z=109$, $120$ and $190$. (b) Which element is "unbiquadium"? (c) Predict the period, group and block of the element with $Z=120$ and the formula of its chloride.
(a) $109$: un-nil-enn-ium $\to$ Unnilennium, Une. $120$: un-bi-nil-ium $\to$ Unbinilium, Ubn. $190$: un-enn-nil-ium — drop one "n" of enn before nil $\to$ Unennilium, Uen.
(b) un $=1$, bi $=2$, quad $=4$: $Z=124$, symbol Ubq.
(c) Oganesson ($118$) completes period 7, so $Z=119$ and $120$ start period 8 by filling $8s$: element 120 is $\mathrm{[Og]}\,8s^{2}$, period 8, group 2, s-block — an alkaline earth metal below radium. Like $\mathrm{RaCl_{2}}$, its chloride is expected to be $\mathrm{MCl_{2}}$ (in systematic symbols $\mathrm{UbnCl_{2}}$).
Check The symbol uses the first letter of each root in order ($\mathrm{U}$-$\mathrm{b}$-$\mathrm{n}$ for 1-2-0); the trimmed spellings never change the symbol.

An element has the configuration $\mathrm{[Ar]}\,3d^{10}4s^{2}4p^{4}$. Its group number is

Metals, non-metals and metalloids

A glance at the table coloured by type shows another pattern: metals on the left and at the bottom, non-metals at the top right, and a narrow diagonal band of in-between elements separating them.

📘 Definition 9.3 — Metals, non-metals and metalloids

Metals — about four-fifths of all elements — are lustrous, good conductors of heat and electricity, malleable and ductile, and (except mercury) solid at room temperature; gallium and caesium melt just above it ($303\ \mathrm{K}$ and $302\ \mathrm{K}$). Chemically they tend to lose electrons, forming cations and basic oxides. All s-block (except hydrogen), d-block and f-block elements are metals, and so are the heavier members of groups 13–15.

Non-metals are usually gases or brittle solids (bromine is the only liquid), are poor conductors, and tend to gain or share electrons, forming anions and acidic oxides. They lie at the top right of the p-block, together with hydrogen.

Metalloids (semi-metals) have properties between the two — they look somewhat metallic, are semiconductors, and form oxides that are amphoteric or weakly acidic. The usual list is boron, silicon, germanium, arsenic, antimony and tellurium; they lie along the zigzag line from boron down to tellurium (polonium and astatine are sometimes added).

The trend behind the pattern. Metallic character — the ease of losing electrons — decreases across a period (the nuclear charge felt by the valence electrons grows) and increases down a group (the valence electrons are farther from the nucleus). So the most metallic elements sit at the bottom left (Cs, Fr) and the most non-metallic at the top right (F, O), and the boundary between the two runs diagonally. Group 14 shows the whole range in one column: carbon is a non-metal, silicon and germanium are metalloids, tin and lead are metals. Group 15 does the same: N and P non-metals, As and Sb metalloids, Bi a metal. Section 9.2 explains these trends in terms of ionisation enthalpy and electronegativity.

✏️ Example 6 — Identify the elements (NEET level)
Three elements X, Y and Z satisfy the following. X lies in period 4 and its atom has six unpaired electrons. Y lies in the d-block of period 4, its atom has exactly one unpaired electron, and the ion $\mathrm{Y^{+}}$ has a completely filled $d$ subshell and no $4s$ electron. Z is in the same group as Y and in the next period. (a) Identify X, Y and Z with their configurations and groups. (b) Find the sum of their atomic numbers. (c) Classify each as metal, non-metal or metalloid.
Find the sum of the atomic numbers of X, Y and Z:
X In period 4 the most unpaired electrons possible come from $3d^{5}4s^{1}$: five in $3d$ and one in $4s$, six in all. That is chromium, $\mathrm{[Ar]}\,3d^{5}4s^{1}$, $Z=24$, group $5+1=6$. (Mn, $3d^{5}4s^{2}$, has only five.)
Y $\mathrm{Y^{+}}=\mathrm{[Ar]}\,3d^{10}$ has $28$ electrons, so Y has $29$: copper, $\mathrm{[Ar]}\,3d^{10}4s^{1}$, one unpaired ($4s$) electron, group 11. (Zn⁺, $3d^{10}4s^{1}$, still has a $4s$ electron, and Zn has no unpaired electron; Sc has one unpaired electron but Sc⁺ is $3d^{1}4s^{1}$.)
Z Below copper in period 5: $Z=36+11=47$, silver, $\mathrm{[Kr]}\,4d^{10}5s^{1}$ (the same $d^{10}s^{1}$ pattern), group 11.
(b), (c) $24+29+47=100$. All three are d-block elements and therefore metals.
Check Each configuration adds up: $18+5+1=24$, $18+10+1=29$, $36+10+1=47$ ✓.

In the configuration decoder set $n=4$, $ns=1$, $(n-1)d=10$ and $np=0$. What will the decoder report?

With $n=4$, $ns=1$, $(n-1)d=10$, $np=0$ the readouts show configuration $\mathrm{[Ar]}\ 3d^{10}\,4s^{1}$, period 4, "11 · d-block" and element Cu ($Z = 29$); the verdict says this is the ground-state configuration of Cu. The group is $(n-1)d+ns=10+1=11$. Now move $ns$ to 2 and $(n-1)d$ to 9: the decoder still says group 11 and copper, but warns that copper's real ground state is $3d^{10}4s^{1}$ — the group does not care how the eleven electrons are shared between $3d$ and $4s$. Then set $np=3$: the decoder fills $3d$ to 10, puts 2 in $4s$ and reports group 15, arsenic.
Interactive 2 — Configuration Decoder: Period, Group and Block

Build a valence configuration: choose the valence shell $n$ and the numbers of electrons in $ns$, $(n-1)d$ and $np$ (the decoder keeps it physically sensible — a $p$ electron needs a full $ns$, and from $n=4$ a full $(n-1)d$). The orbital boxes fill by Hund's rule; the decoder applies Rule 9.2, finds the element in the table below and tells you whether your configuration is that element's real ground state. Press Play to step through a tour of examples.

4250
configuration—
period—
group · block—
element—
✏️ Example 7 — NEET style: group-mates by elimination
The elements directly below and directly above the element with atomic number $33$ in the long-form periodic table have the atomic numbers, respectively, (A) $51$ and $15$ (B) $41$ and $25$ (C) $51$ and $25$ (D) $65$ and $15$
Before you open the solution, find the atomic number of the element directly above $Z=33$:
Place it (10 s) $18\lt33\le36$: period 4, $k=33-18=15$, and in periods 4–5 the group is $k$ itself — group 15, p-block: arsenic, $\mathrm{[Ar]}\,3d^{10}4s^{2}4p^{3}$ (Rule 9.2).
Below and above Period 5, group 15: $Z=36+15=51$ (antimony). Period 3, group 15: $Z=10+(15-10)=15$ (phosphorus).
Answer (A) $51$ and $15$.
⏱ Shortcut In groups 13–18 two group-mates differ by the length of the lower period: $\mathrm{As}-\mathrm{P}=18$ (period 4) and $\mathrm{Sb}-\mathrm{As}=18$ (period 5), because the ten d-block elements are inserted from period 4 on. Options built on a gap of $8$ — (B) and the $25$ of (C) — forget that insertion; the $32$ of (D) is the length of period 6 (bismuth is $51+32=83$). In groups 1 and 2 use the length of the upper period instead: $\mathrm{K}-\mathrm{Na}=19-11=8$.
⚠️ NEET traps

1. Mendeleev's law versus the modern law. Mendeleev ordered by atomic mass; the modern law (Law 9.1) orders by atomic number, the basis Moseley found ($\sqrt{\nu}$ rises linearly with $Z$). The "inverted" pairs Ar/K, Co/Ni and Te/I are anomalies only on the mass scale. Eka-aluminium is gallium and eka-silicon is germanium — not aluminium or silicon themselves.

2. Old group numbers. In the 1–18 numbering a p-block group is $10+(\text{valence electrons})$: oxygen is in group 16, not 6, and aluminium in group 13, not 3. Only in the s-block does the group equal the number of valence electrons.

3. Block from the last-filled subshell, not from the outer shell. Zn, Cd and Hg ($(n-1)d^{10}ns^{2}$) are d-block elements of group 12 even though their outer shell holds only s electrons. Helium has an s configuration but stands in group 18 with the noble gases, because its only shell is complete. La and Ac are d-block (group 3); the f-block rows begin at Ce and Th.

4. Palladium and the f-block count. Pd ($\mathrm{[Kr]}\,4d^{10}$) has no electron with $n=5$ yet is in period 5 — place an element by its $Z$ between noble gases when in doubt. In periods 6 and 7 add the $14$ f-block elements for groups 4–18: hafnium is $54+4+14=72$, not $58$.

5. IUPAC roots and symbols. 0 nil, 1 un, 2 bi, 3 tri, 4 quad, 5 pent, 6 hex, 7 sept, 8 oct, 9 enn. "Hex" is $6$ and "sept" is $7$ — there is no "sext". The symbol uses the first letter of every root: 104 is Unq, 116 is Uuh.

6. Metalloids. The usual list is B, Si, Ge, As, Sb, Te. Aluminium (an amphoteric oxide, but a good conductor) and tin are metals; phosphorus and sulphur are non-metals. "How many are metalloids" questions are built on exactly these near-misses.

Which statement about metallic character is correct?

Exercises

Use the Aufbau order and the noble-gas atomic numbers; groups are numbered 1–18. Answer boxes accept the number only.

I
The periodic law and the structure of the table.
  • 1 State the modern periodic law and explain, using Moseley's work, why atomic number rather than atomic mass is the basis of the table.
  • 2 Argon ($39.9\ \mathrm{u}$) comes before potassium ($39.1\ \mathrm{u}$) in the table. Show that this is the natural order under the modern law and explain why it would be wrong to swap them.
  • 3 How many elements does period 4 contain? Name the subshells that are filled in it.
  • 4 How many elements does period 6 contain? Show the count from the orbitals filled.
  • 5 Find the atomic number of the noble gas that ends period 5.
  • 6 Why does period 3 contain only 8 elements although the third shell can hold 18 electrons?
  • 7 How many elements make up the d-block part of period 4? Name the first and the last.
  • 8 Give the family names of groups 1, 2, 16, 17 and 18, with one example from period 3 for each (where one exists).
1 Properties of the elements are periodic functions of their atomic numbers (Law 9.1). Moseley found that the square root of the characteristic X-ray frequency increases linearly with the nuclear charge $Z$, not with atomic mass; $Z$ fixes the number of electrons, and therefore the configuration that decides the chemistry.
2 $Z(\mathrm{Ar})=18\lt Z(\mathrm{K})=19$, so Ar comes first. Swapping them by mass would put the noble gas argon among the alkali metals and potassium among the noble gases. (The masses are out of order because argon is mostly the heavy isotope $^{40}\mathrm{Ar}$.)
3 $4s$, $3d$, $4p$: $1+5+3=9$ orbitals, $18$ elements (K to Kr).
4 $6s$, $4f$, $5d$, $6p$: $1+7+5+3=16$ orbitals, $32$ elements (Cs to Rn).
5 $2+8+8+18+18=54$ (xenon).
6 After $3s$ and $3p$, the next lowest subshell is $4s$, not $3d$. So a new period (shell $n=4$) starts at potassium; the $3d$ orbitals fill only later, within period 4.
7 The $3d$ series: $10$ elements, scandium ($Z=21$) to zinc ($Z=30$).
8 Group 1 alkali metals (Na); group 2 alkaline earth metals (Mg); group 16 chalcogens (S); group 17 halogens (Cl); group 18 noble gases (Ar).
II
Configurations and blocks.
  • 1 Write the ground-state configurations of the elements with $Z=19$, $24$ and $35$ and name the block of each.
  • 2 Name the block of the elements with $Z=2$, $30$, $57$ and $92$, explaining any that might surprise you.
  • 3 Write the general valence configurations of p-block and d-block elements.
  • 4 How many unpaired electrons are there in an atom of the element with $Z=26$?
  • 5 How many electrons occupy the $3d$ subshell of the element with $Z=29$?
  • 6 How many elements of period 4 have exactly one electron in the $4s$ subshell in the ground state?
  • 7 Which subshells are being filled in the lanthanoids and in the actinoids? Why are these elements printed in separate rows?
  • 8 Give one argument for placing hydrogen in group 1 and one for placing it with the halogens.
1 K $\mathrm{[Ar]}\,4s^{1}$, s-block; Cr $\mathrm{[Ar]}\,3d^{5}4s^{1}$, d-block; Br $\mathrm{[Ar]}\,3d^{10}4s^{2}4p^{5}$, p-block.
2 He: s-block configuration ($1s^{2}$) but placed in group 18. Zn ($30$): d-block (last electron in $3d$). La ($57$, $\mathrm{[Xe]}\,5d^{1}6s^{2}$): d-block, group 3 — the f-rows start at Ce. U ($92$): f-block, an actinoid.
3 p-block $ns^{2}np^{1-6}$; d-block $(n-1)d^{1-10}\,ns^{0-2}$ (mostly $ns^{2}$).
4 Fe $\mathrm{[Ar]}\,3d^{6}4s^{2}$: by Hund's rule five $3d$ orbitals hold $\uparrow\downarrow,\uparrow,\uparrow,\uparrow,\uparrow$ — $4$ unpaired electrons.
5 Cu is $\mathrm{[Ar]}\,3d^{10}4s^{1}$: $10$ electrons in $3d$ (not 9).
6 K ($4s^{1}$), Cr ($3d^{5}4s^{1}$) and Cu ($3d^{10}4s^{1}$): $3$ elements.
7 Lanthanoids (Ce–Lu) fill $4f$; actinoids (Th–Lr) fill $5f$. Placing their 14 + 14 elements inside periods 6 and 7 would make the table 32 columns wide, so they are printed below it; they belong after La and Ac in group 3.
8 Group 1: one valence electron ($1s^{1}$) and forms $\mathrm{H^{+}}$. Halogens: one electron short of a noble-gas shell, forms $\mathrm{H^{-}}$ (in $\mathrm{NaH}$), exists as diatomic $\mathrm{H_{2}}$ and is a non-metal.
III
Locating elements.
  • 1 Find the period, block and group of the element $1s^{2}2s^{2}2p^{6}3s^{2}3p^{3}$ and name it.
  • 2 Find the period, block and group of $\mathrm{[Kr]}\,4d^{10}5s^{2}5p^{5}$ and name it.
  • 3 Find the group of $\mathrm{[Ar]}\,3d^{7}4s^{2}$ and name the element.
  • 4 Find the period and group of $\mathrm{[Xe]}\,4f^{14}5d^{6}6s^{2}$.
  • 5 Find the period, group and block of $\mathrm{[Rn]}\,7s^{1}$ and name it.
  • 6 Find the atomic number of the element in period 4, group 14.
  • 7 Find the atomic number of the element in period 6, group 11.
  • 8 A metal ion $\mathrm{M^{2+}}$ has the configuration $\mathrm{[Ar]}\,3d^{5}$. Find the atomic number of M, its period and its group.
1 Period 3, p-block, group $10+2+3=15$: phosphorus ($Z=15$).
2 Period 5, p-block, group $10+2+5=17$: iodine ($Z=36+10+2+5=53$).
3 d-block, group $7+2=9$: cobalt ($Z=27$), period 4.
4 Period 6, d-block, group $6+2=8$: osmium ($Z=76$).
5 Period 7, s-block, group 1: francium ($Z=87$).
6 $Z=18+14=32$ (germanium).
7 $Z=54+11+14=79$ (gold).
8 $\mathrm{M^{2+}}$ has $23$ electrons, so M has $25$: manganese, $\mathrm{[Ar]}\,3d^{5}4s^{2}$ — the two $4s$ electrons are lost first. Period 4, group $5+2=7$.
IV
IUPAC names, metals and non-metals, and harder problems.
  • 1 Give the IUPAC systematic names and symbols of the elements with $Z=107$, $113$ and $120$.
  • 2 What is the atomic number of "unbiunium"?
  • 3 Element 119 has not yet been made. Predict its period, group and block, and the formula of its oxide.
  • 4 Write the systematic name and symbol of the element with $Z=190$.
  • 5 Classify Na, Si, S, As, Ca, Br, Ge and Te as metals, non-metals or metalloids. How many of them are metalloids?
  • 6 Describe how the metallic character changes down group 14 from carbon to lead, naming the type of each element.
  • 7 An element of period 4 belongs to the p-block and its atom has two unpaired electrons. There are two possibilities. Find the sum of their atomic numbers.
  • 8 (Modelling) Researchers attempting to make element 120 expect it to behave like radium. In which group should it be placed? Give two properties you would expect it to have.
1 107: Unnilseptium, Uns. 113: Ununtrium, Uut ("trium" — the "i" of tri dropped). 120: Unbinilium, Ubn.
2 un-bi-un: $Z=121$ (symbol Ubu).
3 After Og ($118$) the next shell begins: $\mathrm{[Og]}\,8s^{1}$, period 8, group 1, s-block — an alkali metal (Ununennium, Uue), oxide $\mathrm{M_{2}O}$.
4 un-enn-nil-ium with one "n" dropped: Unennilium, Uen.
5 Metals: Na, Ca. Non-metals: S, Br. Metalloids: Si, As, Ge, Te — $4$.
6 C non-metal (diamond is an insulator); Si and Ge metalloids (semiconductors); Sn and Pb metals. Metallic character increases down the group as the valence electrons are held less tightly.
7 Two unpaired p electrons: $4p^{2}$ (germanium, $Z=32$) or $4p^{4}$ (selenium, $Z=34$, with one paired and two unpaired $4p$ electrons). Sum $=66$.
8 Configuration $\mathrm{[Og]}\,8s^{2}$: group 2, an alkaline earth metal. Expected: a reactive metal forming $\mathrm{M^{2+}}$ ions, a basic oxide $\mathrm{MO}$, and a chloride $\mathrm{MCl_{2}}$; like radium, strongly radioactive.
🎯 Exam corner NEET · MCQ

Six original problems in the NEET style — one correct option each, marked $+4$ / $-1$ / $0$. Keep the noble-gas atomic numbers $2,\ 10,\ 18,\ 36,\ 54,\ 86,\ 118$ in your head: with them every "place this element" question takes a few seconds. Aim for about a minute per problem and read the ⏱ steps for the fast route.

E1. NEET · MCQ Given below are two statements. Statement I: The element with atomic number $46$ belongs to period 4, because its ground-state configuration $\mathrm{[Kr]}\,4d^{10}$ contains no electron with $n=5$. Statement II: An element whose atomic number lies in the range $36\lt Z\le54$ belongs to period 5. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true

Statement II Period 5 starts after krypton ($Z=36$) and ends with xenon ($Z=54$), so every $Z$ in $37$–$54$ is in period 5 (Rule 9.2). True.
Statement I $Z=46$ is palladium; $36\lt46\le54$, so it is in period 5, group 10, even though its $5s$ subshell is empty. False.
Answer (D).
⏱ Shortcut Statement II, if true, places $Z=46$ in period 5 at once — so the two statements cannot both be true, and (A) goes. Palladium is the one element whose period is not "the highest $n$ in the configuration".

E2. NEET · MCQ Assertion (A): Zinc ($Z=30$) is placed in the d-block of the periodic table. Reason (R): The outermost shell of a zinc atom contains two electrons, both in the $4s$ subshell. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Both true Zn is $\mathrm{[Ar]}\,3d^{10}4s^{2}$: its outer shell holds just the two $4s$ electrons (R true), and it is the last member of the $3d$ series, group 12 (A true).
The link The block is fixed by the subshell the differentiating electron enters (Definition 9.2) — for Sc to Zn that is $3d$. Two $4s$ electrons would, if anything, suggest group 2 and the s-block, so R does not explain A.
Answer (B).
⏱ Shortcut Put "because" between them: "zinc is d-block because its outer shell is $4s^{2}$" sounds wrong at once — calcium has the same outer shell and is s-block.

E3. NEET · MCQ Match List-I (atomic number) with List-II (block).
List-I: P. $37$ · Q. $58$ · R. $47$ · S. $52$
List-II: I. f-block · II. s-block · III. p-block · IV. d-block
Choose the correct answer. (A) P-II, Q-IV, R-I, S-III (B) P-III, Q-I, R-IV, S-II (C) P-II, Q-I, R-IV, S-III (D) P-II, Q-I, R-III, S-IV

Place each P: $37=36+1$, first element of period 5 — s-block (Rb). R: $47=36+11$, group 11 — d-block (Ag). S: $52=36+16$, group 16 — p-block (Te). Q: $58=54+4$; in period 6, $k=4$ to $17$ are the lanthanoids — f-block (Ce) (Rule 9.2).
Answer (C) P-II, Q-I, R-IV, S-III.
⏱ Shortcut P (one after a noble gas) must be II: that removes (B). Q ($58$, just after La) must be I: that removes (A). Between (C) and (D), S has $k=16$ — p-block.

E4. NEET · MCQ How many of the following statements about the long form of the periodic table are correct? (i) It has 18 groups and 7 periods. (ii) The fourth period contains 32 elements. (iii) The f-block elements are printed in two separate rows but belong to periods 6 and 7. (iv) Every element of group 18 has the valence configuration $ns^{2}np^{6}$. (v) Hydrogen is a metal, because it is placed at the top of group 1. (vi) The element with $Z=118$ completes the seventh period. (vii) Metallic character increases from left to right across a period. (A) $3$ (B) $4$ (C) $5$ (D) $6$

Correct (i) Definition 9.1; (iii) the lanthanoids and actinoids belong after La and Ac; (vi) oganesson, $Z=118$, is the noble gas of period 7.
Wrong (ii) period 4 has $18$ (period 6 has 32); (iv) helium is $1s^{2}$; (v) hydrogen is a non-metal, a family of its own; (vii) metallic character decreases across a period (Section 9.1, metals and non-metals).
Answer (A) $3$.
⏱ Shortcut Tick or cross each statement in the margin as you read it. The words "every" (iv) and a reason attached to a position (v) are the usual false ones.

E5. NEET · MCQ In the outline of the long-form periodic table below, four elements are marked W, X, Y and Z. Their atomic numbers are, respectively, (A) $12,\ 30,\ 16,\ 55$ (B) $20,\ 30,\ 34,\ 55$ (C) $12,\ 30,\ 34,\ 55$ (D) $12,\ 48,\ 34,\ 87$ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 period group W X Y Z (the two f-block rows are not shown)

Read the cells W: period 3, group 2. X: period 4, group 12. Y: period 4, group 16. Z: period 6, group 1.
Atomic numbers W $=10+2=12$ (Mg); X $=18+12=30$ (Zn); Y $=18+16=34$ (Se); Z $=54+1=55$ (Cs) — Rule 9.2, with $k=$ group in period 4.
Answer (C) $12,\ 30,\ 34,\ 55$.
⏱ Shortcut Count the rows carefully: (A) reads Y in period 3 (sulphur), (B) reads W in period 4 (calcium), and (D) moves X and Z one period down. Only X is common to three options, so check W, Y and Z.

E6. NEET · MCQ Which of the following pairs of atomic number and IUPAC systematic name is incorrectly matched? (A) $105$ — Unnilpentium (B) $109$ — Unnilennium (C) $112$ — Ununbium (D) $116$ — Ununsextium

Check the roots 1-0-5: un-nil-pent-ium ✓; 1-0-9: un-nil-enn-ium ✓; 1-1-2: un-un-bi-ium, written "bium" ✓ (Rule 9.3).
The wrong one 1-1-6: the root for 6 is hex, so the name is Ununhexium (Uuh, now livermorium). "Sext" is not a root at all; "sept" means 7.
Answer (D).
⏱ Shortcut Learn the ten roots as one line — nil, un, bi, tri, quad, pent, hex, sept, oct, enn — and read each name digit by digit; an unfamiliar root is the error.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. Does the periodic law really hold for a measured physical property? Plot one property of the first 56 elements against atomic number and test whether its peaks and troughs fall at the same places in every period.

Why it matters. Lothar Meyer's curve of atomic volume against mass was one of the first pieces of evidence for periodicity, and the same kind of plot is still used today: materials scientists screening thousands of compounds by computer (in battery, catalyst and semiconductor research) use the position of each element in the table as an input feature, precisely because so many properties repeat with the period. Seeing the pattern emerge from raw data is the best way to understand why the table works.

What to do.

  1. From an open data source (for example the IUPAC or a national standards body's data pages, or a reputable online periodic table) collect, for $Z=1$ to $56$, the melting point and the density of each element in its standard state. Note which values are missing or estimated.
  2. Compute the molar volume $V_{m}=M/\rho$ (in $\mathrm{cm^{3}\,mol^{-1}}$) for the solid elements.
  3. Plot $V_{m}$ against $Z$ and, on a second graph, the melting point against $Z$. Mark the noble gases and the alkali metals.
  4. Check where the maxima of $V_{m}$ fall (expect the alkali metals) and where the melting point peaks (expect the middle of each period: C, Si, and the d-block metals).
  5. Explain one striking feature in terms of bonding or configuration — for example, why the melting point jumps at carbon and falls to nitrogen.

Tools: A spreadsheet or Python with a plotting library; an open, citable periodic-table data source.

Hand in: Your two plots with the periods marked, a table of the data you used with its source, and one page interpreting the repeating pattern and any element that breaks it.

Going further. Repeat the molar-volume plot against atomic mass instead of $Z$ for the region Ar–K and Te–I. Does the pattern become less regular, as the modern periodic law predicts?

Instructor note: the molar-volume curve shows sharp maxima at Li, Na, K, Rb and Cs and broad minima in the middle of each period, reproducing Meyer's historical curve. Students often need help with the gases (use liquid or solid densities near the boiling point, or leave them out) and with carbon's allotropes (use graphite). The atomic-mass version barely differs except at the inverted pairs, which is a good discussion point about why $Z$ is the true ordering variable.

🧪 Self-check quiz

0/5 correct

Q1. The element that Mendeleev called eka-silicon, and whose properties he predicted before its discovery, is

Q2. The element with atomic number $31$ is placed in

Q3. How many elements does the sixth period contain?

Q4. Statement I: Lanthanum ($Z=57$) is a d-block element. Statement II: Cerium ($Z=58$) is the first member of the lanthanoid series. Choose the correct option.

Q5. Which of the following elements is not a metalloid?