15.1 Alkanes
The saturated hydrocarbons $\mathrm{C_{n}H_{2n+2}}$: how to name them and count their isomers, five ways to make them, why branching lowers the boiling point, how ethane twists between staggered and eclipsed shapes, and how a free-radical chain mechanism decides the ratio of halogenation products.
The gas in a kitchen cylinder, the CNG in a city bus, the petrol in a scooter, the wax of a candle and the bitumen on a road are all mixtures of alkanes — molecules made of nothing but carbon and hydrogen joined by single bonds. The old name paraffins (Latin parum affinis, "little affinity") records how unreactive they are: acids, alkalis and most oxidising agents leave them untouched at room temperature. Yet alkanes are the fuels of the modern world, because two reactions do work on them — burning in oxygen, and attack by halogen atoms in light. Both run through free radicals, and the second one is a favourite NEET source of product-count and product-ratio questions.
In this section we classify hydrocarbons, name alkanes and count their isomers, list the general methods of making them (each one changes the carbon skeleton in a predictable way), explain their physical properties from intermolecular forces, and look at the shapes ethane takes as it rotates about its C–C bond — the conformations drawn as sawhorse and Newman projections. The last part is the mechanism of free-radical halogenation, with the rule that turns "relative reactivity of 1°, 2° and 3° hydrogens" into percentages of products. Section 15.2 moves on to alkenes.
Hydrocarbons, alkanes and their IUPAC names
A compound that contains only carbon and hydrogen is a hydrocarbon. Because carbon forms four bonds and links to itself in chains and rings, there are millions of them, and we sort them first by the shape of the skeleton and then by the kinds of carbon–carbon bonds present.
A hydrocarbon is a compound of carbon and hydrogen only. It is saturated if every carbon–carbon bond is a single bond, and unsaturated if it has at least one C=C or C≡C bond.
- Acyclic (open-chain, aliphatic) hydrocarbons: alkanes $\mathrm{C_{n}H_{2n+2}}$ (all single bonds), alkenes $\mathrm{C_{n}H_{2n}}$ (one C=C), alkynes $\mathrm{C_{n}H_{2n-2}}$ (one C≡C).
- Cyclic hydrocarbons: alicyclic ones, whose rings behave like open chains (cyclohexane $\mathrm{C_{6}H_{12}}$, a cycloalkane $\mathrm{C_{n}H_{2n}}$), and aromatic ones built on the benzene ring ($\mathrm{C_{6}H_{6}}$), which have a special stability (Section 15.4).
Alkanes are acyclic saturated hydrocarbons, general formula $\mathrm{C_{n}H_{2n+2}}$; consecutive members of the series differ by $\mathrm{CH_{2}}$ (14 g mol⁻¹). Every carbon is $sp^{3}$ hybridised and tetrahedral, with bond angles close to $109.5^{\circ}$ and C–C bonds about $154\ \mathrm{pm}$ long; the carbon chains are therefore zig-zag, not straight.
A carbon bonded to one, two, three or four other carbons is called primary (1°), secondary (2°), tertiary (3°) or quaternary (4°). Hydrogens take the name of the carbon that carries them: a $\mathrm{CH_{3}}$ group at a chain end has three 1° hydrogens, a $\mathrm{CH_{2}}$ inside a chain has two 2° hydrogens, a $\mathrm{CH}$ at a branch point has one 3° hydrogen; a quaternary carbon has none.
From butane onwards the same molecular formula fits more than one skeleton. $\mathrm{C_{4}H_{10}}$ can be a straight chain (butane) or a three-carbon chain with a methyl branch (2-methylpropane, "isobutane"). These are chain isomers, a kind of structural isomerism: the atoms are joined in a different order, so the compounds have different physical and chemical properties. The number of alkane isomers grows rapidly: $\mathrm{C_{4}}$ 2, $\mathrm{C_{5}}$ 3, $\mathrm{C_{6}}$ 5, $\mathrm{C_{7}}$ 9, $\mathrm{C_{8}}$ 18, $\mathrm{C_{9}}$ 35, $\mathrm{C_{10}}$ 75. To talk about them without ambiguity we need systematic names.
- Parent chain. Find the longest continuous chain of carbons (it need not be drawn in a straight line). Its length gives the root: meth-, eth-, prop-, but-, pent-, hex-, hept-, oct-, non-, dec- + -ane. If two chains are equally long, choose the one carrying more substituents.
- Numbering. Number the chain from the end that gives the substituents the lowest set of locants, compared term by term at the first point of difference (2,2,4 beats 2,4,4).
- Substituents. Name the alkyl branches (methyl, ethyl, propyl, isopropyl, tert-butyl …), give each its locant, and use di-, tri-, tetra- for repeats, with one locant per group (2,2-dimethyl, never 2-dimethyl).
- Order. Write the substituents in alphabetical order, ignoring the multiplying prefixes di-, tri- and the italic prefixes sec-, tert-, but counting iso- and neo-. If the two directions of numbering still tie, the group cited first alphabetically gets the lower number.
- Punctuation. Commas between numbers, hyphens between numbers and words, the whole name written as one word: 3-ethyl-2-methylhexane.
The IUPAC name of $\mathrm{(CH_{3})_{2}CH{-}CH_{2}{-}C(CH_{3})_{3}}$ ("isooctane", the 100-point standard of petrol octane ratings) is
Preparation and physical properties of alkanes
Alkanes are obtained on a large scale from natural gas and petroleum. In the laboratory, and in exam questions, they are made from compounds that already have the right carbon skeleton or one that can be built up or cut down. The key question for each method is: what happens to the number of carbon atoms?
(a) Hydrogenation of alkenes and alkynes (same carbon skeleton). Hydrogen adds across the multiple bond on the surface of a finely divided metal: platinum or palladium at room temperature, or nickel at about 523–573 K.
$$\mathrm{CH_{3}CH{=}CH_{2} + H_{2} \xrightarrow{\text{Pt / Pd / Ni}} CH_{3}CH_{2}CH_{3}}$$ $$\mathrm{HC{\equiv}CH + 2\,H_{2} \xrightarrow{\text{Pt / Pd / Ni}} CH_{3}CH_{3}}$$(b) Reduction of haloalkanes (same skeleton). Zinc and dilute hydrochloric acid replace the halogen by hydrogen: $\mathrm{CH_{3}CH_{2}CH_{2}Cl + H_{2} \xrightarrow{\mathrm{Zn,\ H^{+}}} CH_{3}CH_{2}CH_{3} + HCl}$.
(c) Wurtz reaction (carbon number doubles). Sodium metal in dry ether joins two alkyl groups of a haloalkane:
$$\mathrm{2\,R{-}X + 2\,Na \xrightarrow{\text{dry ether}} R{-}R + 2\,NaX}$$It gives symmetrical alkanes with an even number of carbons, works best with primary halides, and cannot make methane. A mixture of two different halides gives all three possible products $\mathrm{R{-}R}$, $\mathrm{R'{-}R'}$ and $\mathrm{R{-}R'}$.
(d) Decarboxylation (one carbon fewer). The sodium salt of a carboxylic acid heated with soda lime (NaOH + CaO) loses $\mathrm{CO_{2}}$ as sodium carbonate:
$$\mathrm{R{-}COONa + NaOH \xrightarrow[\Delta]{\text{CaO}} R{-}H + Na_{2}CO_{3}}$$(e) Kolbe electrolysis (two alkyl groups joined). An aqueous solution of the sodium or potassium salt is electrolysed. At the anode the carboxylate ion is oxidised to a radical that loses $\mathrm{CO_{2}}$, and two alkyl radicals pair up; at the cathode water is reduced:
$$\mathrm{anode:\ \ 2\,RCOO^{-} \rightarrow 2\,RCOO^{\bullet} + 2\,e^{-};\quad 2\,RCOO^{\bullet} \rightarrow 2\,R^{\bullet} + 2\,CO_{2};\quad 2\,R^{\bullet} \rightarrow R{-}R}$$ $$\mathrm{cathode:\ \ 2\,H_{2}O + 2\,e^{-} \rightarrow H_{2} + 2\,OH^{-}}$$ $$\mathrm{overall:\ \ 2\,RCOONa + 2\,H_{2}O \rightarrow R{-}R + 2\,CO_{2} + H_{2} + 2\,NaOH}$$An acid with $m+1$ carbons gives an alkane with $2m$ carbons; methane cannot be made this way either.
The two "doubling" reactions are easy to confuse with the "cutting" one. Decarboxylation simply snips off the carboxyl carbon: sodium ethanoate gives methane, sodium propanoate gives ethane. Kolbe electrolysis snips off the carboxyl carbon and joins the two remaining fragments: sodium ethanoate gives ethane, sodium propanoate gives butane. Wurtz joins two alkyl groups taken from halides.
Alkanes are non-polar: the C–C bond is perfectly non-polar and the C–H bond only very slightly polar, and in any case the tetrahedral geometry cancels the small bond dipoles. The only forces between their molecules are weak London dispersion forces, which grow with the number of electrons and with the area over which two molecules can touch.
- State. $\mathrm{C_{1}}$–$\mathrm{C_{4}}$ are gases, $\mathrm{C_{5}}$–$\mathrm{C_{17}}$ liquids and higher members waxy solids at 298 K.
- Boiling point rises with chain length (more electrons, larger contact area): methane 112 K, ethane 185 K, propane 231 K, butane 273 K, pentane 309 K, hexane 342 K.
- Branching lowers the boiling point among isomers: a branched molecule is more compact (closer to a sphere), so it touches its neighbours over a smaller area. Pentane 309 K, 2-methylbutane 301 K, 2,2-dimethylpropane 283 K.
- Melting point depends also on how well the molecules pack in the crystal. Highly symmetrical molecules pack well, so 2,2-dimethylpropane melts at 257 K, far above pentane (143 K) and 2-methylbutane (113 K).
- Solubility and density. "Like dissolves like": alkanes are insoluble in water but mix with non-polar solvents (benzene, tetrachloromethane, ether). They are less dense than water, so they float on it.
Which alkane cannot be prepared by the Wurtz reaction?
Conformations of ethane
A σ bond is cylindrically symmetrical about the line joining the two nuclei, so one end of the molecule can rotate about a C–C single bond without breaking the bond. In ethane, as one $\mathrm{CH_{3}}$ group turns relative to the other, the six hydrogens take up an infinite number of different arrangements in space. These are not different compounds — they turn into each other millions of times a second — but they do differ slightly in energy.
The different spatial arrangements of a molecule that arise by rotation about single bonds are its conformations (conformers, rotamers). For ethane they are described by the dihedral angle $\varphi$: looking along the C–C bond, the angle between a C–H bond on the front carbon and a C–H bond on the rear carbon.
- Eclipsed ($\varphi=0^{\circ},120^{\circ},240^{\circ}$): each rear C–H bond lies directly behind a front C–H bond.
- Staggered ($\varphi=60^{\circ},180^{\circ},300^{\circ}$): each rear C–H bond sits midway between two front ones.
- Skew (gauche-type): any angle in between.
Sawhorse projection: the C–C bond is drawn as a long diagonal line seen obliquely, the front carbon at the lower left and the rear carbon at the upper right, each with its three bonds. Newman projection: the molecule is viewed straight down the C–C bond; the front carbon is a point where three bonds meet, the rear carbon a circle from whose edge its three bonds emerge.
(In the eclipsed Newman drawing the rear bonds are turned by a few degrees only so that they can be seen; in the real eclipsed conformation they are exactly hidden.) Why should the eclipsed form be higher in energy? In it, each pair of bonding electron clouds — a front C–H bond and the rear C–H bond behind it — are as close as they can get, and they repel. In the staggered form the bond pairs are as far apart as possible. A second, smaller contribution is that in the staggered form each filled C–H σ orbital lines up with an empty C–H σ* orbital on the neighbouring carbon, a stabilising interaction of the hyperconjugation type. The extra energy of a conformation caused by eclipsing of bonds is called torsional strain.
- The staggered conformation has the lowest energy and the eclipsed conformation the highest; the difference, the rotational barrier, is about $12.5\ \mathrm{kJ\,mol^{-1}}$ — roughly $4.2\ \mathrm{kJ\,mol^{-1}}$ for each of the three eclipsed H/H pairs.
- The energy varies smoothly with the dihedral angle, rising and falling three times per full turn; a good approximation is $$E(\varphi)=\tfrac12E_{0}\,(1+\cos3\varphi),\qquad E_{0}=12.5\ \mathrm{kJ\,mol^{-1}},$$ with $\varphi=0^{\circ}$ eclipsed.
- Bond lengths and bond angles are (to a very good approximation) the same in every conformation; only the dihedral angle changes.
- The barrier is small compared with the thermal energy available at room temperature ($RT\approx2.5\ \mathrm{kJ\,mol^{-1}}$ at 298 K, with a spread of molecular energies well above that), so rotation is practically free: the conformations interconvert so fast that they cannot be isolated. At any instant most molecules are near a staggered arrangement.
Start from the eclipsed conformation ($\varphi=0^{\circ}$, energy $12.5\ \mathrm{kJ\,mol^{-1}}$) and turn the rear carbon by $20^{\circ}$ — one third of the way to staggered. How much of the torsional strain is left?
In the Newman projection of staggered ethane, the dihedral angle between a front C–H bond and the nearest rear C–H bond is
Free-radical halogenation, combustion and cracking
Because their C–C and C–H bonds are strong and almost non-polar, alkanes do not attract electrophiles or nucleophiles. They do react with species that have an unpaired electron. In diffused sunlight or ultraviolet light, or at about 520–670 K in the dark, chlorine replaces the hydrogens of methane one after another: $\mathrm{CH_{3}Cl}$, $\mathrm{CH_{2}Cl_{2}}$, $\mathrm{CHCl_{3}}$ and finally $\mathrm{CCl_{4}}$. The reaction is a chain reaction: a single photon can lead to thousands of molecules of product.
Initiation. Light (or heat) breaks the weakest bond present, the Cl–Cl bond (about $242\ \mathrm{kJ\,mol^{-1}}$), homolytically — each atom keeps one electron of the bonding pair: $\mathrm{Cl{-}Cl \xrightarrow{h\nu} 2\,Cl^{\bullet}}$.
Propagation (two steps that repeat in a cycle, each consuming one radical and producing another):
$$\mathrm{(i)\ \ Cl^{\bullet} + H{-}CH_{3} \rightarrow H{-}Cl + {}^{\bullet}CH_{3}}$$ $$\mathrm{(ii)\ \ {}^{\bullet}CH_{3} + Cl{-}Cl \rightarrow CH_{3}{-}Cl + Cl^{\bullet}}$$Termination. Two radicals meet and pair their electrons, removing radicals from the chain: $\mathrm{Cl^{\bullet}+{}^{\bullet}Cl \rightarrow Cl_{2}}$, $\mathrm{{}^{\bullet}CH_{3}+{}^{\bullet}CH_{3} \rightarrow CH_{3}{-}CH_{3}}$, $\mathrm{{}^{\bullet}CH_{3}+{}^{\bullet}Cl \rightarrow CH_{3}Cl}$.
The small amount of ethane found among the products is evidence for the methyl radical. A radical inhibitor (e.g. a trace of $\mathrm{O_{2}}$) slows the reaction, and the chlorinated products can be attacked again, so a large excess of the alkane is used when the monohalo compound is wanted.
A single-barbed ("fish-hook") arrow shows the movement of one electron; a full arrowhead (used for polar mechanisms in Section 15.2) shows an electron pair. Every propagation step above has one fish-hook from each of the two electrons that form the new bond, and one to the atom that keeps the leftover electron.
Reactivity of the halogens. The order is $\mathrm{F_{2}\gt Cl_{2}\gt Br_{2}\gt I_{2}}$. Fluorination is explosive and breaks C–C bonds too, so it is not used directly. Iodination is reversible, because the HI formed reduces the iodoalkane back to the alkane; it succeeds only if an oxidising agent such as iodic acid or nitric acid destroys the HI ($\mathrm{5\,HI + HIO_{3} \rightarrow 3\,I_{2} + 3\,H_{2}O}$). Chlorination and bromination are the useful ones — and they behave very differently towards different kinds of hydrogen.
Which hydrogen is removed? In an alkane such as propane there are two kinds of hydrogen, and step (i) decides which product forms: removing a 1° hydrogen gives the 1° radical $\mathrm{CH_{3}CH_{2}CH_{2}^{\bullet}}$ (and 1-chloropropane), removing a 2° hydrogen gives the 2° radical $\mathrm{CH_{3}\dot{C}HCH_{3}}$ (and 2-chloropropane). Alkyl radicals are stabilised by hyperconjugation, so their stability is $3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{CH_{3}^{\bullet}}$, and a C–H bond is easier to break the more stable the radical it leaves behind. Each 3° hydrogen is therefore removed faster than each 2° one, and each 2° faster than each 1°.
For monohalogenation of an alkane, the amount of each product is proportional to
$$(\text{number of equivalent H atoms that give it})\times(\text{relative reactivity per H}),$$so the percentage of product $i$ is $\ \%_{i}=\dfrac{n_{i}\,r_{i}}{\sum_{j}n_{j}\,r_{j}}\times100$.
Typical relative reactivities per hydrogen, $1^{\circ}:2^{\circ}:3^{\circ}$: chlorination at 298 K: $1:3.8:5$; bromination (about 400 K): $1:82:1600$. These values hold for monohalogenation with the alkane in excess, so that polyhalogenation can be ignored.
Why is bromine so much more selective? Compare step (i) for the two halogens. With chlorine it is roughly thermoneutral (C–H about $435\ \mathrm{kJ\,mol^{-1}}$ broken, H–Cl $431\ \mathrm{kJ\,mol^{-1}}$ formed), so the transition state comes early and looks like the reactants: the radical is hardly formed yet, and its stability matters little. With bromine the step is clearly endothermic (H–Br is only $366\ \mathrm{kJ\,mol^{-1}}$), so the transition state comes late and resembles the alkyl radical; differences in radical stability then show up almost fully in the activation energies. The more reactive reagent is the less selective one — the reactivity–selectivity principle.
- Draw the skeleton and sort the carbons that carry hydrogen into sets of equivalent carbons (related by the symmetry of the molecule). Each set gives one structural product: number of monohalo structural isomers = number of sets. A quaternary carbon gives nothing.
- For each set, count its hydrogens $n_{i}$ and note whether they are 1°, 2° or 3°.
- Multiply by the relative reactivity, add, and convert to percentages (Rule 15.6).
- If the question asks for "all isomers including stereoisomers", check every product for a chiral carbon (four different groups) — each such product counts twice (a pair of enantiomers).
- Name each product by IUPAC rules — the chain may need renumbering once the halogen is in.
2-Methylpropane has nine 1° hydrogens and one 3° hydrogen. With chlorine at 298 K ($1:3.8:5$), which monochloro product is the major one?
Alkanes take part in a few other reactions that NEET expects you to recognise — the reagent and the conditions matter as much as the product.
- Complete combustion gives carbon dioxide and water and releases a large amount of heat: $$\mathrm{C_{n}H_{2n+2} + \tfrac{3n+1}{2}\,O_{2} \rightarrow n\,CO_{2} + (n+1)\,H_{2}O},$$ e.g. $\mathrm{CH_{4}(g) + 2\,O_{2}(g) \rightarrow CO_{2}(g) + 2\,H_{2}O(l)}$, $\Delta_{c}H^{\circ}=-890\ \mathrm{kJ\,mol^{-1}}$. In too little air, carbon monoxide and soot (carbon black) form.
- Controlled oxidation with catalysts: $\mathrm{2\,CH_{4}+O_{2}\xrightarrow{\text{Cu, 523 K, 100 atm}}2\,CH_{3}OH}$; $\mathrm{CH_{4}+O_{2}\xrightarrow{\mathrm{Mo_{2}O_{3}},\ \Delta}HCHO+H_{2}O}$; $\mathrm{2\,CH_{3}CH_{3}+3\,O_{2}\xrightarrow{\mathrm{(CH_{3}COO)_{2}Mn},\ \Delta}2\,CH_{3}COOH+2\,H_{2}O}$. A tertiary C–H is oxidised by $\mathrm{KMnO_{4}}$ to an alcohol: $\mathrm{(CH_{3})_{3}CH \rightarrow (CH_{3})_{3}COH}$.
- Isomerisation: n-alkanes heated with anhydrous $\mathrm{AlCl_{3}}$ and HCl give branched isomers (hexane → 2-methylpentane + 3-methylpentane) — branched alkanes burn more smoothly in engines.
- Aromatisation: alkanes with six or more carbons, over $\mathrm{Cr_{2}O_{3}}$, $\mathrm{V_{2}O_{5}}$ or $\mathrm{Mo_{2}O_{3}}$ on alumina at about 773 K and 10–20 atm, cyclise and lose hydrogen: $\mathrm{C_{6}H_{14}\rightarrow C_{6}H_{6}+4\,H_{2}}$.
- Reaction with steam: $\mathrm{CH_{4}+H_{2}O\xrightarrow{\text{Ni, 1273 K}}CO+3\,H_{2}}$ (an industrial source of hydrogen).
- Pyrolysis (cracking): heated to about 773 K in the absence of air, higher alkanes break into smaller alkanes, alkenes and hydrogen by a free-radical process, e.g. $\mathrm{C_{6}H_{14}\rightarrow C_{4}H_{8}+C_{2}H_{6}}$ or $\mathrm{C_{3}H_{6}+C_{2}H_{4}+CH_{4}}$. This is how heavy oil fractions are turned into petrol and how ethene and propene are made.
1. Counting products from atoms instead of sets. Monohalo products = sets of equivalent hydrogens, not hydrogens. 2,2-Dimethylpropane has twelve H but gives one monochloro product; 2,3-dimethylbutane gives two; pentane three; 2-methylbutane four. A quaternary carbon carries no H and gives nothing. Read whether the question counts stereoisomers too.
2. Number alone, or reactivity alone. The share of a product is $n\times r$. 2-Methylpropane with $\mathrm{Cl_{2}}$ gives mostly the primary chloride ($9\times1$ beats $1\times5$) but with $\mathrm{Br_{2}}$ almost only the tertiary bromide. Radicals do not rearrange, so an option with a new carbon skeleton is always wrong.
3. Carbon arithmetic of the preparations. Soda lime removes one carbon ($\mathrm{CH_{3}COONa\to CH_{4}}$); Kolbe electrolysis joins two alkyl groups ($\mathrm{CH_{3}COONa\to C_{2}H_{6}}$, not methane); Wurtz doubles the alkyl group and with two different halides gives three alkanes. Neither Wurtz nor Kolbe can make methane; soda lime and $\mathrm{Zn/H^{+}}$ reduction of $\mathrm{CH_{3}Cl}$ can.
4. Conditions that options swap. Wurtz needs dry ether (water destroys sodium). $\mathrm{H_{2}}$ adds over Pt or Pd at room temperature but over Ni only at about 523–573 K. Halogenation needs light or heat; fluorination is explosive, and iodination is reversible unless $\mathrm{HIO_{3}}$ or $\mathrm{HNO_{3}}$ removes the HI. Isomerisation uses anhydrous $\mathrm{AlCl_{3}}$ + HCl; aromatisation of hexane to benzene uses $\mathrm{Cr_{2}O_{3}}$, $\mathrm{V_{2}O_{5}}$ or $\mathrm{Mo_{2}O_{3}}$ on alumina near 773 K.
5. Branching: boiling point down, melting point not necessarily. Among the pentanes the boiling point falls with branching (309, 301, 283 K), but the compact, symmetrical 2,2-dimethylpropane has by far the highest melting point (257 K).
6. Conformations are not isomers you can bottle. Staggered ($60^{\circ}$) and eclipsed ($0^{\circ}$) ethane differ by about $12.5\ \mathrm{kJ\,mol^{-1}}$ (torsional strain) — far too little to stop rotation at room temperature, so they cannot be separated. Bond lengths and bond angles are the same in both; only the dihedral angle changes, and the staggered form is the more stable one.
Free-radical bromination is far more selective than chlorination because
Exercises
Use the relative reactivities of Rule 15.6 where needed, and C = 12, H = 1, O = 16, Na = 23, Cl = 35.5, Br = 80 (g mol⁻¹).
- 1 Which of $\mathrm{C_{7}H_{16}}$, $\mathrm{C_{5}H_{10}}$, $\mathrm{C_{6}H_{14}}$, $\mathrm{C_{8}H_{16}}$, $\mathrm{C_{9}H_{20}}$ can be alkanes? How many is that? Say what the others could be.
- 2 How many structural isomers does heptane, $\mathrm{C_{7}H_{16}}$, have? Name the ones with a five-carbon parent chain.
- 3 Give IUPAC names: (a) $\mathrm{(CH_{3})_{2}CHCH_{2}CH(CH_{3})_{2}}$; (b) $\mathrm{CH_{3}CH_{2}C(CH_{3})_{2}CH_{2}CH_{3}}$; (c) $\mathrm{(CH_{3})_{3}C{-}CH(CH_{3}){-}CH_{2}CH_{3}}$.
- 4 Each name is wrong. Draw the structure it describes and give the correct name: (a) 2-ethylbutane; (b) 3-methylbutane; (c) 2,3,3-trimethylbutane; (d) 1,1-dimethylpropane.
- 5 In 2,2,4-trimethylpentane, how many carbons are 1°, 2°, 3° and 4°? How many primary hydrogens does it have?
- 6 Name the isomer of $\mathrm{C_{5}H_{12}}$ that has (a) only 1° and 2° carbons; (b) one quaternary carbon; (c) exactly one tertiary carbon.
- 7 An alkane has molar mass $86\ \mathrm{g\,mol^{-1}}$. Find the number of carbon atoms, and name its isomer that has two tertiary carbons.
- 8 Which $\mathrm{C_{6}H_{14}}$ isomer gives the smallest number of structurally different monochloro derivatives? How many?
- 1 Write the equation for the reaction of bromoethane with sodium in dry ether and name the product. Why must the ether be dry?
- 2 A mixture of iodomethane and 1-iodopropane is treated with sodium in dry ether. How many different alkanes can form? Name them.
- 3 Which haloalkane gives 2,3-dimethylbutane as the only alkane in a Wurtz reaction?
- 4 $11.0\ \mathrm{g}$ of sodium butanoate is heated with soda lime. Name the alkane and find its mass, assuming complete reaction.
- 5 Potassium 2-methylpropanoate, $\mathrm{(CH_{3})_{2}CHCOOK}$, is electrolysed in aqueous solution. Name the alkane formed, and find the total number of moles of gas (at both electrodes together) produced per 2 mol of salt.
- 6 Arrange in increasing order of boiling point, with a reason: hexane, 2,2-dimethylbutane, pentane, 2-methylpentane.
- 7 2,2-Dimethylpropane boils lower than pentane but melts more than 100 K higher. Explain both facts.
- 8 How many different alkenes of formula $\mathrm{C_{5}H_{10}}$ give 2-methylbutane on catalytic hydrogenation? Name them.
- 1 How many staggered conformations does ethane pass through in one full turn ($0^{\circ}\le\varphi\lt360^{\circ}$) of one methyl group? At which angles?
- 2 Find the torsional energy at $\varphi=40^{\circ}$.
- 3 Assuming the barrier is shared equally among the eclipsed H/H pairs, find the energy cost of one H/H eclipsing interaction.
- 4 Using $N_{1}/N_{2}=e^{\Delta E/RT}$, estimate the ratio of molecules near the staggered and near the eclipsed arrangement at 298 K ($R=8.314\ \mathrm{J\,mol^{-1}\,K^{-1}}$).
- 5 Explain why the staggered and eclipsed forms of ethane cannot be separated at room temperature, although they differ in energy.
- 6 Draw Newman projections of the staggered and eclipsed forms. In the staggered form, how many front/rear H pairs are anti (dihedral angle $180^{\circ}$)?
- 7 Is the dipole moment of ethane zero in all its conformations? Do its C–C bond length and H–C–H angles change on rotation?
- 1 How many structurally different monochloro products does 2-methylpentane give? Name them.
- 2 Find the percentage of 2-chloro-2-methylpropane formed on monochlorination of 2-methylpropane at 298 K.
- 3 Find the percentage of 2-bromobutane formed on monobromination of butane.
- 4 Why is direct fluorination of alkanes not used, and why must an oxidising agent be present for iodination? Balance the reaction of HI with iodic acid.
- 5 Name the isomer of $\mathrm{C_{5}H_{12}}$, and the isomer of $\mathrm{C_{8}H_{18}}$, that gives only one monochloro derivative.
- 6 How many moles of $\mathrm{O_{2}}$ are needed to burn 1 mol of pentane completely? Write the balanced equation.
- 7 How much heat is released when $8.0\ \mathrm{g}$ of methane burns completely ($\Delta_{c}H^{\circ}=-890\ \mathrm{kJ\,mol^{-1}}$)?
- 8 Write the termination steps for the chlorination of ethane and explain why a little butane is found among the products.
- 9 Cracking of decane, $\mathrm{C_{10}H_{22}}$, gives octane and one other product. Identify it and balance the equation. What does aromatisation of hexane give?
Six original problems in the NEET style — one correct option each, marked $+4$ / $-1$ / $0$. Aim for about a minute per problem. For alkanes, three habits do most of the work: count carbons through every preparation, sort hydrogens into sets before counting products, and remember that the only thing that changes between conformations is the dihedral angle.
E1. NEET · MCQ The graph shows the potential energy of ethane as the rear $\mathrm{CH_{3}}$ group is rotated about the C–C bond. Four points P, Q, R and S are marked on the curve. Which statement is correct? (A) P and S are eclipsed conformations, Q and R are staggered, and $E_{P}-E_{Q}\approx12.5\ \mathrm{kJ\,mol^{-1}}$ (B) P and R are eclipsed conformations, Q and S are staggered, and $E_{P}-E_{Q}\approx12.5\ \mathrm{kJ\,mol^{-1}}$ (C) P and S are staggered conformations, Q and R are eclipsed, and $E_{P}-E_{Q}\approx12.5\ \mathrm{kJ\,mol^{-1}}$ (D) P and S are eclipsed conformations, Q and R are staggered, and the C–C bond is longer at P than at Q
E2. NEET · MCQ Given below are two statements. Statement I: Sodium propanoate heated with soda lime gives propane. Statement II: Electrolysis of an aqueous solution of sodium propanoate gives butane at the anode. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true
E3. NEET · MCQ Assertion (A): Monochlorination of 2-methylpropane in light at 298 K gives 1-chloro-2-methylpropane as the major product. Reason (R): A primary C–H bond is more reactive towards a chlorine atom than a tertiary C–H bond. Choose the correct answer. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E4. NEET · MCQ Match List-I (reaction) with List-II (main organic product).
List-I: P. bromoethane + Na, dry ether · Q. sodium ethanoate + soda lime, heat · R. electrolysis of aqueous sodium ethanoate · S. 1-chloropropane + Zn, dilute HCl
List-II: I. ethane · II. propane · III. methane · IV. butane
Choose the correct answer. (A) P-I, Q-III, R-IV, S-II (B) P-IV, Q-III, R-I, S-II (C) P-IV, Q-I, R-III, S-II (D) P-II, Q-III, R-I, S-IV
E5. NEET · MCQ How many of the following statements are correct? (i) Methane cannot be prepared by the Wurtz reaction. (ii) 2,2-Dimethylpropane boils at a lower temperature than pentane. (iii) Hexane heated with anhydrous $\mathrm{AlCl_{3}}$ and HCl gives branched isomers such as 2-methylpentane. (iv) The staggered and eclipsed conformations of ethane can be separated at room temperature. (v) Iodination of methane goes to completion without any oxidising agent. (vi) Complete combustion of one mole of propane needs five moles of $\mathrm{O_{2}}$. (A) 4 (B) 3 (C) 5 (D) 2
E6. NEET · MCQ An alkane X of formula $\mathrm{C_{5}H_{12}}$ gives only one monochloro derivative in light, and its isomer Y gives four structurally different monochloro derivatives. X and Y are (A) pentane and 2-methylbutane (B) 2,2-dimethylpropane and pentane (C) 2,2-dimethylpropane and 2-methylbutane (D) 2-methylbutane and 2,2-dimethylpropane
Research question. Can a single number that describes the shape of an alkane skeleton predict its boiling point?
Why it matters. Refineries, fuel designers and environmental modellers need properties (boiling point, volatility, octane rating) of thousands of hydrocarbons that have never been measured. "Topological indices" — numbers computed from the bond graph of a molecule — were among the first tools of what is now called cheminformatics, and they still underlie models used to predict how fuels evaporate and how pollutants spread.
What to do.
- Collect the boiling points of all alkanes from $\mathrm{C_{4}}$ to $\mathrm{C_{7}}$ (19 compounds) from an open chemical database.
- For each, draw the carbon skeleton and compute the Wiener index $W$: the sum, over every pair of carbon atoms, of the number of bonds on the shortest path between them (e.g. butane: $W=10$; 2-methylpropane: $W=9$).
- Plot boiling point against $W$, and separately against the number of carbons. Within each group of isomers, does a smaller $W$ (more branched, more compact) mean a lower boiling point?
- Fit a model such as $T_{b}=a+b\,n+c\,W$ by least squares in a spreadsheet and report how far the worst prediction is from the measured value.
Tools: An open chemical database, paper or a short script for the path counts, a spreadsheet with a regression function.
Hand in: A table of $n$, $W$ and $T_{b}$, the two plots, your fitted equation, and a paragraph linking the trend to dispersion forces and contact area.
Going further. Try melting points instead. Why does the model fail badly for 2,2-dimethylpropane and 2,2,3,3-tetramethylbutane? What extra property of a molecule would you need to describe?
🧪 Self-check quiz
Q1. Sodium ethanoate is (i) heated with soda lime and (ii) electrolysed in aqueous solution. The organic products are
Q2. The number of structurally different monochloro derivatives of 3-methylpentane is
Q3. Hexane is converted into benzene (aromatisation) by heating it
Q4. Which of the following alkanes has the highest melting point?
Q5. Which step is a propagation step in the chlorination of methane?