6.4 Salt Hydrolysis, Buffers and Solubility Products
Ions from a salt can react with water, a weak acid mixed with its salt resists changes of pH, and a 'insoluble' salt still dissolves to a tiny, calculable extent. Three equations — the hydrolysis constant, the Henderson–Hasselbalch equation and the solubility product $K_{sp}$ — handle all of it, from blood chemistry to qualitative analysis.
Dissolve common salt in water and the pH stays at 7. Dissolve washing soda and the solution turns soapy and alkaline; dissolve ammonium chloride and it turns acidic — although neither salt contains $\mathrm{H^{+}}$ or $\mathrm{OH^{-}}$. Your blood takes in acids from every meal and every muscle contraction, yet its pH barely moves from 7.4. A chemist adds a drop of potassium chromate to a chloride solution and titrates with silver nitrate; the first brick-red tinge appears exactly when the chloride is used up. And the kidney stones that trouble millions of people are crystals of calcium oxalate, a salt "insoluble" in water that nevertheless dissolves and re-precipitates according to a precise equilibrium.
All of these are applications of the ionic equilibria of Section 6.3. In this section we see how adding an ion that is already present shifts an equilibrium (the common-ion effect), why many salts make water acidic or basic (salt hydrolysis), how mixtures of a weak acid and its salt hold the pH steady (buffers), how indicators and titration curves are read, and finally how the solubility product decides whether a sparingly soluble salt dissolves or precipitates. Throughout, 298 K, $K_{w}=1.0\times10^{-14}$, $\mathrm{p}K_{a}(\mathrm{CH_{3}COOH})=4.74$ and $\mathrm{p}K_{b}(\mathrm{NH_{3}})=4.74$ unless stated.
The common-ion effect and salt hydrolysis
Add sodium acetate to a solution of acetic acid. Sodium acetate is a salt — a strong electrolyte — so it is completely ionised and floods the solution with $\mathrm{CH_{3}COO^{-}}$ ions. These ions are products of the acid's own ionisation, $\mathrm{CH_{3}COOH\rightleftharpoons H^{+}+CH_{3}COO^{-}}$, so by Le Chatelier's principle the equilibrium shifts to the left and the acid ionises less.
The common-ion effect is the suppression of the ionisation (or of the dissolution) of a weak electrolyte or a sparingly soluble salt by adding a strong electrolyte that supplies one of the same ions. The equilibrium constant does not change; the equilibrium position does.
The size of the effect is easy to compute. In $0.10\ \mathrm{M}$ acetic acid alone, $\alpha=1.34\%$ ($[\mathrm{H^{+}}]=1.34\times10^{-3}\ \mathrm{M}$). If the solution also contains $0.10\ \mathrm{M}$ sodium acetate, then $[\mathrm{CH_{3}COO^{-}}]\approx0.10$ and $[\mathrm{CH_{3}COOH}]\approx0.10$ (the acid hardly ionises), so
$$[\mathrm{H^{+}}]=K_{a}\frac{[\mathrm{CH_{3}COOH}]}{[\mathrm{CH_{3}COO^{-}}]}=1.8\times10^{-5}\ \mathrm{M},\qquad \alpha=\frac{1.8\times10^{-5}}{0.10}=0.018\% .$$The degree of ionisation has fallen about 75 times. In general, for a weak acid in the presence of a strong acid of concentration $C\gg[\mathrm{H^{+}}]_\text{acid}$, $\alpha=K_{a}/C$; for a weak acid with its salt at concentration $c_s$, $\alpha=K_{a}/c_s$. The same idea controls the sulphide concentration in acidified $\mathrm{H_{2}S}$ (Section 6.3, Example 6) and, later in this section, the solubility of salts.
Salt hydrolysis. A salt is formed from an acid and a base, and its ions are the conjugate partners of that acid and base. If the parent acid was weak, the anion is a noticeable base; if the parent base was weak, the cation is a noticeable acid. These ions react with water.
Salt hydrolysis is the reaction of the cation or the anion (or both) of a salt with water that produces $\mathrm{H_{3}O^{+}}$ or $\mathrm{OH^{-}}$ and so changes the pH. Its equilibrium constant is the hydrolysis constant $K_{h}$, and the fraction of the salt hydrolysed is the degree of hydrolysis $h$.
- Anion of a weak acid: $\mathrm{A^{-}(aq)+H_{2}O(l)\rightleftharpoons HA(aq)+OH^{-}(aq)}$, $\ K_{h}=\dfrac{[\mathrm{HA}][\mathrm{OH^{-}}]}{[\mathrm{A^{-}}]}=\dfrac{K_{w}}{K_{a}}$.
- Cation of a weak base: $\mathrm{BH^{+}(aq)+H_{2}O(l)\rightleftharpoons B(aq)+H_{3}O^{+}(aq)}$, $\ K_{h}=\dfrac{K_{w}}{K_{b}}$.
- Both: $\mathrm{BH^{+}(aq)+A^{-}(aq)\rightleftharpoons B(aq)+HA(aq)}$, $\ K_{h}=\dfrac{K_{w}}{K_{a}K_{b}}$.
Ions of strong acids and strong bases ($\mathrm{Na^{+}}$, $\mathrm{K^{+}}$, $\mathrm{Ba^{2+}}$, $\mathrm{Cl^{-}}$, $\mathrm{NO_{3}^{-}}$, $\mathrm{ClO_{4}^{-}}$) do not hydrolyse.
Each $K_{h}$ is just Result 6.16 in disguise: $K_{h}$ for $\mathrm{A^{-}}$ is $K_{b}(\mathrm{A^{-}})$. Now take a salt of concentration $c$ whose anion hydrolyses to the extent $h$: $[\mathrm{HA}]=[\mathrm{OH^{-}}]=ch$ and $[\mathrm{A^{-}}]=c(1-h)$, so $K_{h}=\dfrac{ch^{2}}{1-h}\approx ch^{2}$ for small $h$. Hence $h=\sqrt{K_{h}/c}$ and $[\mathrm{OH^{-}}]=ch=\sqrt{K_{h}c}=\sqrt{K_{w}c/K_{a}}$. Taking $-\log$:
$$\mathrm{pOH}=\tfrac12\left(\mathrm{p}K_{w}-\mathrm{p}K_{a}-\log c\right)\ \Rightarrow\ \mathrm{pH}=7+\tfrac12\mathrm{p}K_{a}+\tfrac12\log c .$$For a salt of a weak acid and a weak base both ions hydrolyse and their products ($\mathrm{H_{3}O^{+}}$ and $\mathrm{OH^{-}}$) partly cancel. With $[\mathrm{BH^{+}}]=[\mathrm{A^{-}}]=c(1-h)$ and $[\mathrm{B}]=[\mathrm{HA}]=ch$, we get $\dfrac{h^{2}}{(1-h)^{2}}=K_{h}$, so $\dfrac{h}{1-h}=\sqrt{K_{h}}$ — no $c$ appears. Then $[\mathrm{H^{+}}]=K_{a}\dfrac{[\mathrm{HA}]}{[\mathrm{A^{-}}]}=K_{a}\dfrac{h}{1-h}=\sqrt{\dfrac{K_{w}K_{a}}{K_{b}}}$.
| Salt of | Example | $K_{h}$ | $h$ | pH |
|---|---|---|---|---|
| strong acid + strong base | $\mathrm{NaCl}$, $\mathrm{KNO_{3}}$ | — | 0 | $7$ (neutral) |
| weak acid + strong base | $\mathrm{CH_{3}COONa}$, $\mathrm{Na_{2}CO_{3}}$, $\mathrm{KCN}$ | $K_{w}/K_{a}$ | $\sqrt{K_{h}/c}$ | $7+\tfrac12\mathrm{p}K_{a}+\tfrac12\log c$ (basic) |
| strong acid + weak base | $\mathrm{NH_{4}Cl}$, $\mathrm{CuSO_{4}}$, $\mathrm{FeCl_{3}}$ | $K_{w}/K_{b}$ | $\sqrt{K_{h}/c}$ | $7-\tfrac12\mathrm{p}K_{b}-\tfrac12\log c$ (acidic) |
| weak acid + weak base | $\mathrm{CH_{3}COONH_{4}}$, $\mathrm{NH_{4}CN}$ | $K_{w}/(K_{a}K_{b})$ | $\dfrac{\sqrt{K_{h}}}{1+\sqrt{K_{h}}}$ | $7+\tfrac12(\mathrm{p}K_{a}-\mathrm{p}K_{b})$ |
Conditions: $h\ll1$ in the second and third rows; water's own ions negligible. For the last row pH and $h$ are independent of $c$; the solution is acidic if $K_{a}\gt K_{b}$, basic if $K_{b}\gt K_{a}$, neutral if they are equal. For the hydrolysis of hydrated metal cations such as $\mathrm{[Fe(H_{2}O)_{6}]^{3+}}$ the same "weak base" picture applies: a small, highly charged cation pulls electron density from a coordinated water molecule and releases $\mathrm{H^{+}}$.
The pH of $0.10\ \mathrm{M}$ ammonium acetate is 7.00. If the solution is diluted to $0.010\ \mathrm{M}$, its pH becomes
Buffer solutions
Add $0.010\ \mathrm{mol}$ of HCl to a litre of pure water and the pH crashes from 7 to 2. Add the same acid to a litre containing $0.10\ \mathrm{mol}$ each of acetic acid and sodium acetate, and the pH moves from $4.74$ to $4.65$. The second solution is a buffer.
A buffer solution resists changes in pH when small amounts of acid or base are added or when it is diluted. Common buffers contain comparable amounts of a conjugate acid–base pair:
- acidic buffer: a weak acid and its salt with a strong base, e.g. $\mathrm{CH_{3}COOH+CH_{3}COONa}$ (pH below 7);
- basic buffer: a weak base and its salt with a strong acid, e.g. $\mathrm{NH_{3}+NH_{4}Cl}$ (pH above 7).
The buffer capacity is the amount of strong acid or base a buffer can take for a given small change of pH. It is larger the more concentrated the buffer, and, for a given total concentration, greatest when $[\text{salt}]=[\text{acid}]$ (pH $=\mathrm{p}K_{a}$). A buffer works usefully only within its buffer range, about $\mathrm{p}K_{a}\pm1$.
How a buffer works. The acidic buffer holds two reservoirs. Added $\mathrm{H^{+}}$ is captured by the large reserve of base: $\mathrm{CH_{3}COO^{-}+H^{+}\rightarrow CH_{3}COOH}$. Added $\mathrm{OH^{-}}$ is captured by the large reserve of acid: $\mathrm{CH_{3}COOH+OH^{-}\rightarrow CH_{3}COO^{-}+H_{2}O}$. Either way a strong acid or base is replaced by a weak one, and only the ratio $[\mathrm{A^{-}}]/[\mathrm{HA}]$ changes — slowly, because both are large. Blood is buffered mainly by $\mathrm{H_{2}CO_{3}/HCO_{3}^{-}}$ and by phosphate and proteins.
Rearranging $K_{a}=\dfrac{[\mathrm{H^{+}}][\mathrm{A^{-}}]}{[\mathrm{HA}]}$ and taking $-\log$ gives, for an acidic buffer,
$$\mathrm{pH}=\mathrm{p}K_{a}+\log\frac{[\text{salt}]}{[\text{acid}]},$$and for a basic buffer
$$\mathrm{pOH}=\mathrm{p}K_{b}+\log\frac{[\text{salt}]}{[\text{base}]}.$$Conditions: the weak acid (base) is so little ionised, and the salt's anion (cation) so little hydrolysed, that their equilibrium concentrations equal the amounts put in; both concentrations are much larger than $[\mathrm{H^{+}}]$ and $[\mathrm{OH^{-}}]$; the ratio lies between about $0.1$ and $10$. Because both species are in the same volume, the ratio of amounts (mol or mmol) may be used. A buffer's pH therefore hardly changes on dilution.
Making a buffer by partial neutralisation. Mixing a weak acid with less than its equivalent of NaOH leaves some acid and forms its salt — a buffer. With $n_\text{acid}$ mmol of acid and $n_\text{OH}$ mmol of base: salt $=n_\text{OH}$, acid left $=n_\text{acid}-n_\text{OH}$. At exactly half-neutralisation, salt $=$ acid and $\mathrm{pH}=\mathrm{p}K_{a}$.
Which mixture is a buffer?
Acid–base indicators and titration curves
In an acid–base titration the equivalence point is reached when the titrant added is exactly equivalent to the substance titrated; the end point is where the indicator changes colour. A good indicator makes the two coincide within a drop.
An acid–base indicator is a weak organic acid (or base) HIn whose acid form and conjugate base form have different colours:
$$\mathrm{HIn(aq)\rightleftharpoons H^{+}(aq)+In^{-}(aq)},\qquad K_{\mathrm{In}}=\frac{[\mathrm{H^{+}}][\mathrm{In^{-}}]}{[\mathrm{HIn}]} .$$So $\dfrac{[\mathrm{In^{-}}]}{[\mathrm{HIn}]}=\dfrac{K_{\mathrm{In}}}{[\mathrm{H^{+}}]}$: the colour is set by the pH. Only a few drops are used, so the indicator itself does not change the pH noticeably.
The eye sees one colour clearly when that form is about ten times as abundant as the other, so the colour changes over
$$\mathrm{pH}=\mathrm{p}K_{\mathrm{In}}\pm1 ,$$with equal amounts of the two forms at $\mathrm{pH}=\mathrm{p}K_{\mathrm{In}}$. An indicator is suitable for a titration if its colour-change range lies inside the steep, nearly vertical part of the titration curve around the equivalence point.
| Indicator | pH range | Colour: acid → base | Typical use |
|---|---|---|---|
| methyl orange | 3.1–4.4 | red → yellow | strong acid vs strong or weak base |
| methyl red | 4.4–6.2 | red → yellow | strong acid vs weak base |
| bromothymol blue | 6.0–7.6 | yellow → blue | strong acid vs strong base |
| phenolphthalein | 8.3–10.0 | colourless → pink | weak or strong acid vs strong base |
Titration curves plot pH against the volume of titrant. Their shape follows from what is in the flask at each stage:
| Titration (0.1 M) | Before equivalence | pH at equivalence | Steep part (±0.1 mL) | Indicator |
|---|---|---|---|---|
| strong acid + strong base | excess strong acid | 7 (NaCl) | about 3.7 → 10.3 | any of the four |
| weak acid + strong base | buffer $\mathrm{HA/A^{-}}$; pH $=\mathrm{p}K_{a}$ at half-way | above 7 ($\mathrm{A^{-}}$ hydrolyses) | about 7 → 10.3 | phenolphthalein |
| weak base + strong acid | buffer $\mathrm{B/BH^{+}}$; pOH $=\mathrm{p}K_{b}$ at half-way | below 7 ($\mathrm{BH^{+}}$ hydrolyses) | about 7 → 3.7 | methyl orange, methyl red |
| weak acid + weak base | buffer | $7+\tfrac12(\mathrm{p}K_{a}-\mathrm{p}K_{b})$ | no sharp jump | none suitable |
- Convert everything to millimoles and let the strong reagent react completely with whatever it meets.
- Start (nothing added): pH of the weak acid or base alone (Result 6.19 of Section 6.3).
- Before equivalence: weak species + its conjugate — a buffer: Henderson–Hasselbalch with the mmol ratio. Half-way: $\mathrm{pH}=\mathrm{p}K_{a}$.
- At equivalence: only the salt, in the total volume — salt hydrolysis (Result 6.21).
- After equivalence: excess strong titrant in the total volume decides the pH (hydrolysis of the salt is negligible beside it).
In the titration lab choose "weak acid + NaOH", keep $\mathrm{p}K_{a}=4.74$ and the indicator methyl orange. At what volume of NaOH does methyl orange change colour (its midpoint, pH 3.75)?
In the titration of a weak acid ($\mathrm{p}K_{a}=5.0$) with NaOH, the pH at the half-equivalence point is
Solubility equilibria and the solubility product
Silver chloride, barium sulphate and calcium carbonate are called "insoluble", yet a little of each always dissolves. Being ionic, the part that dissolves is completely ionised, and in a saturated solution the undissolved solid is in dynamic equilibrium with its ions:
$$\mathrm{AgCl(s)\rightleftharpoons Ag^{+}(aq)+Cl^{-}(aq)} .$$The solid is a pure phase, so (as in heterogeneous equilibria, Section 6.1) it does not appear in the equilibrium expression.
For a sparingly soluble salt $\mathrm{M_{x}X_{y}(s)\rightleftharpoons xM^{y+}(aq)+yX^{x-}(aq)}$ in a saturated solution, the solubility product is
$$K_{sp}=[\mathrm{M^{y+}}]^{x}\,[\mathrm{X^{x-}}]^{y}\qquad(\text{saturated solution, at a given temperature}).$$The same expression evaluated with the actual concentrations in any solution (saturated or not) is the ionic product $Q_{sp}$. The molar solubility $s$ is the amount of salt (mol) that dissolves in one litre of saturated solution.
| Salt | $K_{sp}$ (298 K) | Salt | $K_{sp}$ (298 K) |
|---|---|---|---|
| $\mathrm{AgCl}$ | $1.8\times10^{-10}$ | $\mathrm{PbI_{2}}$ | $7.1\times10^{-9}$ |
| $\mathrm{AgBr}$ | $5.0\times10^{-13}$ | $\mathrm{Ag_{2}CrO_{4}}$ | $1.1\times10^{-12}$ |
| $\mathrm{AgI}$ | $8.3\times10^{-17}$ | $\mathrm{Mg(OH)_{2}}$ | $1.8\times10^{-11}$ |
| $\mathrm{BaSO_{4}}$ | $1.1\times10^{-10}$ | $\mathrm{CuS}$ | $6.3\times10^{-36}$ |
| $\mathrm{CaCO_{3}}$ | $2.8\times10^{-9}$ | $\mathrm{ZnS}$ | $1.6\times10^{-24}$ |
If $s$ mol of $\mathrm{M_{x}X_{y}}$ dissolve per litre of pure water, $[\mathrm{M^{y+}}]=xs$ and $[\mathrm{X^{x-}}]=ys$, so $K_{sp}=(xs)^{x}(ys)^{y}$.
| Type | Examples | $K_{sp}$ | $s$ |
|---|---|---|---|
| $\mathrm{MX}$ | $\mathrm{AgCl}$, $\mathrm{BaSO_{4}}$ | $s^{2}$ | $\sqrt{K_{sp}}$ |
| $\mathrm{MX_{2}}$ or $\mathrm{M_{2}X}$ | $\mathrm{PbI_{2}}$, $\mathrm{Mg(OH)_{2}}$, $\mathrm{Ag_{2}CrO_{4}}$ | $4s^{3}$ | $\sqrt[3]{K_{sp}/4}$ |
| $\mathrm{MX_{3}}$ or $\mathrm{M_{3}X}$ | $\mathrm{Al(OH)_{3}}$, $\mathrm{Ag_{3}PO_{4}}$ | $27s^{4}$ | $\sqrt[4]{K_{sp}/27}$ |
| $\mathrm{M_{3}X_{2}}$ or $\mathrm{M_{2}X_{3}}$ | $\mathrm{Ca_{3}(PO_{4})_{2}}$ | $108s^{5}$ | $\sqrt[5]{K_{sp}/108}$ |
Conditions: the dissolved salt is completely ionised and its ions do not hydrolyse or form complexes appreciably. Only salts of the same formula type can be compared for solubility by their $K_{sp}$ values; otherwise compare $s$.
Common ions lower solubility. In a solution that already contains $c$ mol/L of one of the ions, far fewer formula units can dissolve before the product reaches $K_{sp}$. For AgCl in $c\ \mathrm{M}$ NaCl: $K_{sp}=s(s+c)\approx sc$, so $s=K_{sp}/c$ — in $0.10\ \mathrm{M}$ NaCl, $s=1.8\times10^{-9}\ \mathrm{M}$, about 7500 times less than in water ($1.34\times10^{-5}\ \mathrm{M}$). This is why a precipitate is washed with a dilute solution containing a common ion, and why a slight excess of precipitating reagent is used in gravimetric analysis.
Compute the ionic product $Q_{sp}$ from the concentrations after mixing (allow for dilution), before any reaction:
- $Q_{sp}\gt K_{sp}$: supersaturated — a precipitate forms until $Q_{sp}=K_{sp}$;
- $Q_{sp}=K_{sp}$: saturated — equilibrium, no change;
- $Q_{sp}\lt K_{sp}$: unsaturated — no precipitate (more solid would dissolve).
When several ions can be precipitated by one reagent, the one whose $K_{sp}$ is reached at the lowest reagent concentration precipitates first (selective or fractional precipitation).
In qualitative analysis this is used with $\mathrm{H_{2}S}$. In acid solution the common ion $\mathrm{H^{+}}$ keeps $[\mathrm{S^{2-}}]$ extremely low (Section 6.3, Example 6), so only sulphides with very small $K_{sp}$ (such as CuS and PbS, group II) precipitate. In ammoniacal solution $\mathrm{OH^{-}}$ removes $\mathrm{H^{+}}$, $[\mathrm{S^{2-}}]$ rises enormously and the more soluble sulphides (ZnS, NiS, group IV) come down. Similarly $\mathrm{NH_{4}Cl}$ added with $\mathrm{NH_{3}}$ (group III) keeps $[\mathrm{OH^{-}}]$ low — a common-ion effect on a weak base — so that $\mathrm{Al(OH)_{3}}$ and $\mathrm{Fe(OH)_{3}}$ precipitate but $\mathrm{Mg(OH)_{2}}$ does not.
In the precipitation map choose AgCl and set $\log[\mathrm{Ag^{+}}]=-5$ and $\log[\mathrm{Cl^{-}}]=-5$ (both $1.0\times10^{-5}\ \mathrm{M}$ after mixing). What happens?
1. Comparing solubilities by $K_{sp}$. Only for salts of the same formula type. $\mathrm{Ag_{2}CrO_{4}}$ ($K_{sp}=1.1\times10^{-12}$) is more soluble than AgCl ($1.8\times10^{-10}$) — work out $s$ before you rank.
2. The stoichiometric factors. $\mathrm{MX}$: $s^{2}$; $\mathrm{MX_{2}}$ or $\mathrm{M_{2}X}$: $4s^{3}$; $\mathrm{MX_{3}}$: $27s^{4}$; $\mathrm{M_{3}X_{2}}$: $108s^{5}$. With a common ion keep the powers: for $\mathrm{CaF_{2}}$ in $c\ \mathrm{M}$ $\mathrm{F^{-}}$, $s=K_{sp}/c^{2}$ (Example 7). Adding a common ion lowers the solubility but never changes $K_{sp}$.
3. Mixing dilutes. When two solutions are mixed, every concentration is diluted before you compute $Q_{sp}$ or a buffer ratio. Mixing equal volumes halves each.
4. Which salts hydrolyse. The ion from the weak partner reacts with water: $\mathrm{CH_{3}COONa}$, $\mathrm{Na_{2}CO_{3}}$, KCN are basic; $\mathrm{NH_{4}Cl}$, $\mathrm{CuSO_{4}}$, $\mathrm{FeCl_{3}}$, $\mathrm{AlCl_{3}}$ are acidic; NaCl, $\mathrm{KNO_{3}}$ neutral. For a salt of a weak acid and a weak base ($\mathrm{CH_{3}COONH_{4}}$) the pH does not depend on the concentration.
5. Buffers. A buffer needs a weak acid (or base) with its conjugate partner: HCl + NaCl is not a buffer, but a weak acid half-neutralised by NaOH is one, with $\mathrm{pH}=\mathrm{p}K_{a}$. Henderson–Hasselbalch fails when one component is zero (start or equivalence point of a titration) and when the ratio lies outside about $0.1$–$10$. Diluting a buffer leaves its pH unchanged.
6. Indicators and equivalence points. Weak acid + strong base: equivalence above $7$, use phenolphthalein. Strong acid + weak base: below $7$, use methyl orange. Strong + strong: either works. The common-ion effect is also the basis of salt analysis: $\mathrm{NH_{4}Cl}$ holds back $\mathrm{NH_{4}OH}$ in group III, and HCl holds back the ionisation of $\mathrm{H_{2}S}$ in group II.
The solubility of $\mathrm{PbI_{2}}$ in pure water is $s$. Its $K_{sp}$ is
Exercises
298 K, $K_{w}=1.0\times10^{-14}$; $\mathrm{p}K_{a}(\mathrm{CH_{3}COOH})=4.74$, $\mathrm{p}K_{a}(\mathrm{HCOOH})=3.74$, $\mathrm{p}K_{a}(\mathrm{HCN})=9.31$, $\mathrm{p}K_{b}(\mathrm{NH_{3}})=4.74$; $K_{sp}$ values from the table above unless given. $\log2=0.301$, $\log3=0.477$.
- 1 Find the degree of ionisation (in %) of $0.10\ \mathrm{M}$ acetic acid in a solution that also contains $0.050\ \mathrm{M}$ HCl. ($K_{a}=1.8\times10^{-5}$)
- 2 Find $[\mathrm{OH^{-}}]$ and the pH of a solution $0.10\ \mathrm{M}$ in $\mathrm{NH_{3}}$ and $0.20\ \mathrm{M}$ in $\mathrm{NH_{4}Cl}$. ($K_{b}=1.8\times10^{-5}$)
- 3 Find the pH of $0.050\ \mathrm{M}$ potassium acetate.
- 4 Find the pH of $0.10\ \mathrm{M}$ $\mathrm{NH_{4}NO_{3}}$.
- 5 Find the degree of hydrolysis of $0.10\ \mathrm{M}$ $\mathrm{NH_{4}Cl}$. How does it change if the solution is diluted 100 times?
- 6 Find the pH of $0.10\ \mathrm{M}$ ammonium methanoate (ammonium formate).
- 7 Classify the aqueous solutions of $\mathrm{KNO_{3}}$, $\mathrm{Na_{2}CO_{3}}$, $\mathrm{FeCl_{3}}$, $\mathrm{NH_{4}CN}$, $\mathrm{CH_{3}COONH_{4}}$ and $\mathrm{K_{2}SO_{4}}$ as acidic, basic or (nearly) neutral, with reasons.
- 8 Which has the higher pH, $0.10\ \mathrm{M}$ NaCN or $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COONa}$? Find both.
- 9 Explain why the degree of hydrolysis of a salt of a weak acid and a weak base does not depend on its concentration, while that of $\mathrm{CH_{3}COONa}$ does.
- 1 Find the pH of a buffer $0.20\ \mathrm{M}$ in $\mathrm{CH_{3}COOH}$ and $0.30\ \mathrm{M}$ in $\mathrm{CH_{3}COONa}$.
- 2 What ratio $[\mathrm{CH_{3}COO^{-}}]/[\mathrm{CH_{3}COOH}]$ gives a buffer of pH $5.74$?
- 3 One litre of buffer contains $0.10\ \mathrm{mol}$ $\mathrm{NH_{3}}$ and $0.10\ \mathrm{mol}$ $\mathrm{NH_{4}Cl}$. Find its pH before and after adding $0.020\ \mathrm{mol}$ NaOH.
- 4 $100\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COOH}$ is mixed with $50\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ NaOH. Find the pH.
- 5 $100\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COOH}$ is mixed with $20\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ NaOH. Find the pH.
- 6 What mass of $\mathrm{CH_{3}COONa}$ ($M=82\ \mathrm{g\,mol^{-1}}$) must be dissolved in $500\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COOH}$ to give pH $5.00$?
- 7 Buffer A is $0.010\ \mathrm{M}$ in both acetic acid and acetate; buffer B is $0.10\ \mathrm{M}$ in both. Find the pH change when $0.0050\ \mathrm{mol}$ HCl is added to one litre of each. Which has the greater capacity?
- 8 Over what pH range is an $\mathrm{NH_{3}/NH_{4}Cl}$ buffer useful? Could it be used to hold pH $6$?
- 1 $20.0\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ HCl is titrated with $0.10\ \mathrm{M}$ NaOH. Find the pH after adding $10.0$, $19.9$ and $20.1\ \mathrm{mL}$.
- 2 $20.0\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COOH}$ is titrated with $0.10\ \mathrm{M}$ NaOH. Find the pH after $10.0\ \mathrm{mL}$ and at the equivalence point.
- 3 $20.0\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ $\mathrm{NH_{3}}$ is titrated with $0.10\ \mathrm{M}$ HCl. Find the pH at the equivalence point.
- 4 Choose a suitable indicator for each titration in parts 1–3, and explain why no indicator gives a sharp end point for acetic acid titrated with ammonia.
- 5 An indicator has $\mathrm{p}K_{\mathrm{In}}=5.0$. Find $[\mathrm{In^{-}}]/[\mathrm{HIn}]$ at pH $6.0$ and state its colour-change range.
- 6 $25.0\ \mathrm{mL}$ of $\mathrm{Na_{2}CO_{3}}$ solution needs $12.5\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ HCl to reach the phenolphthalein end point ($\mathrm{CO_{3}^{2-}\rightarrow HCO_{3}^{-}}$). Find the molarity of $\mathrm{Na_{2}CO_{3}}$ and the total volume of HCl needed to the methyl orange end point.
- 7 In a titration of a weak acid with NaOH the pH at half-equivalence is $4.20$. Find $K_{a}$.
- 8 Find the pH at the start of the titration in part 2.
- 1 Find the molar solubility of AgBr in water.
- 2 The solubility of a sparingly soluble salt $\mathrm{MX_{2}}$ is $2.0\times10^{-4}\ \mathrm{mol\,L^{-1}}$. Find its $K_{sp}$.
- 3 A salt $\mathrm{MX_{3}}$ has $K_{sp}=2.7\times10^{-15}$. Find its molar solubility.
- 4 Which is more soluble in water, AgCl or $\mathrm{Ag_{2}CrO_{4}}$? Which has the larger $K_{sp}$? Explain the apparent paradox.
- 5 Find the molar solubility of $\mathrm{PbI_{2}}$ in water and in $0.10\ \mathrm{M}$ KI.
- 6 $100\ \mathrm{mL}$ of $1.0\times10^{-3}\ \mathrm{M}$ $\mathrm{BaCl_{2}}$ is mixed with $100\ \mathrm{mL}$ of $2.0\times10^{-4}\ \mathrm{M}$ $\mathrm{Na_{2}SO_{4}}$. Find $Q_{sp}$ and decide whether $\mathrm{BaSO_{4}}$ precipitates.
- 7 At what pH does $\mathrm{Mg(OH)_{2}}$ begin to precipitate from a $0.10\ \mathrm{M}$ $\mathrm{Mg^{2+}}$ solution?
- 8 What mass (in mg) of AgCl ($M=143.5\ \mathrm{g\,mol^{-1}}$) dissolves in $2.0\ \mathrm{L}$ of water?
Six original problems in the NEET style — one correct option each, marked $+4$ / $-1$ / $0$. All at $298\ \mathrm{K}$; take $\mathrm{p}K_{a}(\mathrm{CH_{3}COOH})=\mathrm{p}K_{b}(\mathrm{NH_{3}})=4.74$. Aim for about a minute per problem: first decide what kind of solution you have — strong, weak, salt, buffer or saturated — then pick the formula.
E1. NEET · MCQ Given below are two statements. Statement I: The pH of a $0.10\ \mathrm{M}$ solution of ammonium ethanoate, $\mathrm{CH_{3}COONH_{4}}$, is close to $7$ and hardly changes when the solution is diluted tenfold. Statement II: For the salt of a weak acid and a weak base, $\mathrm{pH}=7+\tfrac12(\mathrm{p}K_{a}-\mathrm{p}K_{b})$. Choose the correct answer. (A) Both Statement I and Statement II are true (B) Both Statement I and Statement II are false (C) Statement I is true but Statement II is false (D) Statement I is false but Statement II is true
E2. NEET · MCQ Assertion (A): Silver chloride is much less soluble in $0.10\ \mathrm{M}$ NaCl than in pure water. Reason (R): The solubility product of AgCl decreases when sodium chloride is added. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E3. NEET · MCQ Match List-I (solution) with List-II (pH at $298\ \mathrm{K}$).
List-I: P. $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COOH}$ + $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COONa}$ · Q. $0.10\ \mathrm{M}$ $\mathrm{NH_{3}}$ + $0.10\ \mathrm{M}$ $\mathrm{NH_{4}Cl}$ · R. $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COONa}$ · S. $0.10\ \mathrm{M}$ $\mathrm{NH_{4}Cl}$
List-II: I. $4.74$ · II. $5.13$ · III. $8.87$ · IV. $9.26$
Choose the correct answer. (A) P-I, Q-III, R-IV, S-II (B) P-II, Q-IV, R-III, S-I (C) P-I, Q-IV, R-II, S-III (D) P-I, Q-IV, R-III, S-II
E4. NEET · MCQ The graph shows the titration of $25.0\ \mathrm{mL}$ of a weak monobasic acid HA with $0.10\ \mathrm{M}$ NaOH at $298\ \mathrm{K}$. Which statement is correct? (A) The concentration of HA is $0.10\ \mathrm{M}$, its $\mathrm{p}K_{a}$ is about $4.7$, and phenolphthalein is a suitable indicator. (B) The concentration of HA is $0.10\ \mathrm{M}$, its $\mathrm{p}K_{a}$ is about $8.7$, and methyl orange is a suitable indicator. (C) The concentration of HA is $0.050\ \mathrm{M}$, its $\mathrm{p}K_{a}$ is about $4.7$, and phenolphthalein is a suitable indicator. (D) The concentration of HA is $0.10\ \mathrm{M}$, its $\mathrm{p}K_{a}$ is about $2.9$, and methyl orange is a suitable indicator.
E5. NEET · MCQ How many of the following mixtures are buffer solutions? (i) $\mathrm{CH_{3}COOH+CH_{3}COONa}$ (ii) $\mathrm{NH_{4}OH+NH_{4}Cl}$ (iii) $\mathrm{HCl+NaCl}$ (iv) $\mathrm{NaH_{2}PO_{4}+Na_{2}HPO_{4}}$ (v) $50\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ $\mathrm{CH_{3}COOH}$ + $25\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ NaOH (vi) $50\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ HCl + $25\ \mathrm{mL}$ of $0.10\ \mathrm{M}$ $\mathrm{NH_{3}}$ (vii) $\mathrm{NaOH+NaCl}$ (A) $3$ (B) $4$ (C) $5$ (D) $6$
E6. NEET · MCQ Equal volumes of $2.0\times10^{-4}\ \mathrm{M}$ $\mathrm{BaCl_{2}}$ and a solution of $\mathrm{Na_{2}SO_{4}}$ are mixed. $K_{sp}(\mathrm{BaSO_{4}})=1.1\times10^{-10}$. The minimum concentration of the $\mathrm{Na_{2}SO_{4}}$ solution, before mixing, for a precipitate of $\mathrm{BaSO_{4}}$ just to appear is (A) $1.1\times10^{-6}\ \mathrm{M}$ (B) $2.2\times10^{-6}\ \mathrm{M}$ (C) $5.5\times10^{-7}\ \mathrm{M}$ (D) $1.05\times10^{-5}\ \mathrm{M}$
Research question. As the ocean absorbs more carbon dioxide, how do its pH and its ability to keep calcium carbonate shells from dissolving change?
Why it matters. The oceans have taken up roughly a quarter of the $\mathrm{CO_{2}}$ released by human activity, and surface sea-water pH has fallen by about $0.1$ since pre-industrial times. Oyster hatcheries on the Pacific coast of North America have lost whole batches of larvae in corrosive upwelling water, and coral reefs such as Australia's Great Barrier Reef depend on calcium carbonate being supersaturated ($Q_{sp}\gt K_{sp}$). The chemistry is exactly this section: the carbonate buffer and the solubility product of $\mathrm{CaCO_{3}}$.
What to do.
- Using $K_{a1}$ and $K_{a2}$ of carbonic acid (Section 6.3) and the speciation formula behind Interactive 2 of that section, compute the fraction of dissolved inorganic carbon present as $\mathrm{CO_{3}^{2-}}$ at pH $8.2$ and at $8.0$.
- Take $[\mathrm{Ca^{2+}}]=0.010\ \mathrm{M}$ and a total dissolved carbonate of $2.0\times10^{-3}\ \mathrm{M}$. Compute the saturation ratio $\Omega=Q_{sp}/K_{sp}$ for $\mathrm{CaCO_{3}}$ at both pH values (note: real sea water needs corrected constants; use the textbook values for a first model).
- In the laboratory, add a few drops of universal indicator to a carbonated mineral water and to tap water; bubble exhaled breath through a beaker of dilute limewater and watch the indicator and the turbidity of $\mathrm{CaCO_{3}}$ as the pH falls.
- Add a small piece of chalk or seashell to a sample of soda water and to tap water; compare after a day.
Tools: pH meter or universal indicator, limewater, carbonated water, chalk or seashell, a spreadsheet; Interactive 2 above to visualise $Q_{sp}$ against $K_{sp}$.
Hand in: A table of carbonate fraction and $\Omega$ against pH, your observations, and a paragraph explaining why a small pH drop matters so much for shell-building organisms.
Going further. Why does the pH of sea water change so little when $\mathrm{CO_{2}}$ dissolves, while $[\mathrm{CO_{3}^{2-}}]$ changes a lot? Relate your answer to buffer capacity and to the position of pH $8.2$ between $\mathrm{p}K_{a1}$ and $\mathrm{p}K_{a2}$.
🧪 Self-check quiz
Q1. The pH of the aqueous solution of which salt is practically independent of its concentration?
Q2. In an acidic buffer with $[\text{salt}]=[\text{acid}]$, the pH equals
Q3. The relation between the solubility $s$ and $K_{sp}$ of $\mathrm{Ca_{3}(PO_{4})_{2}}$ is
Q4. $K_{sp}$ of $\mathrm{BaSO_{4}}$ is $1.1\times10^{-10}$ at 298 K. Its solubility in $0.010\ \mathrm{M}$ $\mathrm{Na_{2}SO_{4}}$ is about
Q5. The best indicator for titrating acetic acid with sodium hydroxide is