Chapter 20 โ Experimental Skills
Every unit of the syllabus ends in a laboratory. NEET asks what you would read on a Vernier or a screw gauge with a zero error, which graph turns your readings into a straight line, where a null point should lie and which measurement dominates the error โ this chapter collects the experiments and the habits behind them.
A physics laboratory is where the formulas of the other nineteen chapters meet the real world โ and where they first meet its errors. A screw gauge whose faces do not quite close, a pendulum that slowly runs down, a capillary tube with a slightly greasy wall, a metre-bridge wire whose ends are not where the scale says they are: each experiment is a small exercise in getting a trustworthy number out of imperfect apparatus. That is a skill every engineer uses, whether calibrating a sensor in a car, checking the thickness of a turbine blade or testing a batch of diodes on a production line.
The NEET (UG) syllabus lists eighteen experiments, and NEET asks about them in a recognisable way: read this instrument, correct for this zero error, interpret this graph, find the quantity from this null point, and say which reading limits the accuracy. This chapter covers them in two sections. First, measuring instruments and the mechanics and heat experiments: Vernier callipers and the screw gauge with their zero errors, the decaying pendulum and its $A^2$โ$t$ graph, the metre-scale balance, Young's modulus with Searle's apparatus, surface tension by capillary rise, viscosity by terminal velocity, the resonance tube and the method of mixtures. Second, electricity, optics and electronics experiments: resistivity with a metre bridge, resistance from a $V$โ$I$ graph, a galvanometer's resistance and figure of merit by half deflection, focal lengths by the uโv method and parallax, the $i$โ$\delta$ curve of a prism, refractive index with a travelling microscope, diode and Zener characteristics, and identifying components from a mixed collection.
The unit asks for "familiarity with the basic approach and observations" of each experiment, and that is exactly what NEET tests: not long calculations but short MCQs on what is measured, what is plotted, which precaution prevents which error, and which way an error pushes the result โ set as single-answer, statement I / II, assertionโreason, matching and "how many are correct" questions, and as graphs or scale diagrams to be read. All eighteen experiments of the NEET (UG) list โ Vernier callipers, screw gauge, the simple pendulum, the metre scale, Young's modulus, surface tension, viscosity, the resonance tube, specific heat capacity by mixtures, the metre bridge, Ohm's law, half deflection, focal lengths by parallax, the prism, the travelling microscope, diode and Zener characteristics, and identifying components โ are covered by the two sections below.
- find the least count of Vernier callipers and a screw gauge, read them, and correct a reading for a positive or negative zero error;
- describe how the external and internal diameter and the depth of a vessel, the diameter of a wire and the thickness of a sheet are measured, and how backlash is avoided;
- use the $A^2$โ$t$ graph of a lightly damped pendulum to find how much energy it has lost, and use the metre-scale balance to find an unknown mass by moments;
- find Young's modulus with Searle's apparatus, surface tension from capillary rise and viscosity from terminal velocity, and say which measurement dominates the percentage error;
- find the speed of sound and the end correction from two resonance lengths, and a specific heat capacity by the method of mixtures;
- find a resistance and a resistivity with a metre bridge, explain why the null point should be near the middle, correct a $V$โ$I$ measurement for the voltmeter, and find a galvanometer's resistance and figure of merit by half deflection;
- find the focal length of a concave mirror, a convex mirror and a convex lens by the uโv method, using parallax to locate images;
- read the $i$โ$\delta$ curve of a prism, and find a refractive index with a travelling microscope;
- read the characteristics of a pโn diode and a Zener diode, and identify a diode, an LED, a resistor and a capacitor from simple tests;
- solve NEET multiple-choice questions on any of the eighteen experiments in every format the paper uses โ single answer, statement I / II, assertionโreason, matching lists, "how many are correct" and graph or diagram reading โ quickly, by eliminating options.
You want to measure an unknown resistance $X\approx6\ \Omega$ with a metre bridge, and you may put any one of $R=1$, $6$ or $20\ \Omega$ in the other gap. The null point can be located to $\pm1\ \text{mm}$. Which choice gives the most accurate value of $X$?
Sections in this chapter
Measuring Instruments and Mechanics and Heat Experiments
Vernier callipers and the screw gauge with zero errors, the decaying pendulum, the metre-scale balance, Young's modulus, capillary rise, viscosity, the resonance tube and the method of mixtures.
Electricity, Optics and Electronics Experiments
The metre bridge, Ohm's law, half deflection, focal lengths by the uโv method, the prism's $i$โ$\delta$ curve, the travelling microscope, diode characteristics and identifying components.
Eight NEET-style questions on experiments from both sections, shuffled as the paper does โ and one of them needs an instrument from Section 20.1 to finish an experiment from Section 20.2. Answer each one and press Submit (NEET marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press โฑ Take as a timed test. The test clock is generous: at real NEET pace โ about a minute per question โ you should finish all eight in ten minutes, so try to beat it comfortably. Try every question before you open any solution.
E1. NEET ยท MCQ On Vernier callipers $20$ Vernier divisions equal $19$ main-scale divisions of $1\ \text{mm}$. With the jaws closed, the Vernier zero lies to the right of the main-scale zero and the $2$nd Vernier division coincides with a main-scale mark. Measuring the internal diameter of a cup, the main scale reads $30\ \text{mm}$ and the $8$th division coincides. The internal diameter is (A) $30.50\ \text{mm}$ (B) $30.40\ \text{mm}$ (C) $30.30\ \text{mm}$ (D) $30.20\ \text{mm}$
E2. NEET ยท MCQ In a metre bridge, $R=2.0\ \Omega$ is in the left gap and a $50.0\ \text{cm}$ length of wire in the right gap; the null point is $25.0\ \text{cm}$ from the left end. The wire's diameter is measured with a screw gauge whose zero error is $-0.02\ \text{mm}$; the observed reading is $0.48\ \text{mm}$. The resistivity of the wire is about (A) $2.4\times10^{-6}\ \Omega\,\text{m}$ (B) $2.2\times10^{-6}\ \Omega\,\text{m}$ (C) $2.6\times10^{-7}\ \Omega\,\text{m}$ (D) $9.4\times10^{-6}\ \Omega\,\text{m}$
E3. NEET ยท MCQ In the experiment on the dissipation of energy of a simple pendulum, the amplitude falls from $12.0\ \text{cm}$ to $9.0\ \text{cm}$ in $5$ minutes. The fraction of the starting energy dissipated in these $5$ minutes is about (A) $25\%$ (B) $44\%$ (C) $56\%$ (D) $75\%$
E4. NEET ยท MCQ Statement I: In a resonance-tube experiment with a tuning fork, the second resonance occurs when the air column is about twice as long as at the first resonance. Statement II: The speed of sound found from $v=2f(l_2-l_1)$ does not depend on the end correction of the tube. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct
E5. NEET ยท MCQ Assertion (A): When the reverse characteristic of a Zener diode is plotted, a resistor is always connected in series with the Zener. Reason (R): Beyond the breakdown voltage the reverse current of a Zener rises very steeply while the voltage across it stays nearly constant. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E6. NEET ยท MCQ In the uโv experiment with a convex lens, the graph of $|v|$ against $|u|$ meets the line $|v|=|u|$ at $40\ \text{cm}$. When the object pin is placed $30\ \text{cm}$ from the lens, the image pin shows no parallax with the image at a distance from the lens of (A) $12\ \text{cm}$ (B) $40\ \text{cm}$ (C) $60\ \text{cm}$ (D) $120\ \text{cm}$
E7. NEET ยท MCQ A travelling microscope reads $2.360\ \text{cm}$ when focused on an ink mark, $3.160\ \text{cm}$ when focused on the same mark seen through a glass slab placed over it, and $4.760\ \text{cm}$ when focused on powder on the top of the slab. The refractive index of the glass is (A) $2.02$ (B) $1.50$ (C) $3.00$ (D) $0.67$
E8. NEET ยท MCQ How many of the following statements are correct?
(i) Backlash error of a screw gauge is avoided by turning the screw in one direction only while taking a reading.
(ii) In the method of mixtures, heat lost while the hot solid is transferred makes its calculated specific heat capacity too large.
(iii) For balls of one material falling in one liquid, the graph of terminal velocity against the square of the radius is a straight line through the origin.
(iv) In the half-deflection method, the galvanometer resistance is nearly equal to the shunt only when the series resistance is much larger than the shunt.
(v) A resistor gives different ohmmeter readings when its leads are reversed.
(A) Two (B) Four (C) Five (D) Three