4.2 Potential Energy, Conservative Forces and Power
When a force's work depends only on where a body starts and ends, it has a potential energy $U$ with $F=-dU/dx$; if only such forces do work, $K+U$ stays constant. One energy equation then handles springs, roller coasters, vertical circles and — divided by time — power.
A roller coaster is hauled once to the top of its first hill and then let go. For the next two minutes no motor touches it, yet it dives, climbs, loops and twists, always slower at the high points and faster at the low ones. A child's toy gun stores a push in a squeezed spring and gives it back as the speed of a dart. A hydroelectric dam collects water high in the hills and turns its fall into electrical power for a city. All three are the same story: energy stored by position being traded for energy of motion and back again.
In Section 4.1 we learned to compute the work done by forces and showed that the net work equals the change in kinetic energy. This section sorts forces into two kinds — those whose work can be "stored" and returned (gravity, springs) and those whose work cannot (friction, drag). The first kind have a potential energy, and when only they do work the total mechanical energy is conserved. We then apply this to the motion in a vertical circle that Section 3.4 could only begin, and finish with power, the rate of doing work.
Conservative forces and potential energy
Lift a $2\ \text{kg}$ book from the floor to a shelf $1.5\ \text{m}$ up. Whether you lift it straight up, or carry it round the room first, gravity does the same work on it, $-mgh=-29.4\ \text{J}$ (Section 4.1: only the vertical component of each little step counts, and they add up to $h$). Put it back on the floor by any route and gravity gives back $+29.4\ \text{J}$; round the closed trip, gravity's total work is zero. Now drag the same book across a rough table from one corner to another. The friction work is $-\mu_kmg$ times the length of the path: a longer route costs more, and a round trip costs twice as much — friction never gives anything back.
A force is conservative if the work it does on a body moving between two points depends only on those two points and not on the path taken. Equivalently, the work it does round any closed path is zero. Gravity, the force of an ideal spring and the electrostatic force are conservative.
A force that does not have this property is non-conservative. Kinetic friction, air resistance and viscous drag are non-conservative: their work depends on the path and is negative round a closed loop. (Forces applied by people, motors or ropes are also treated as non-conservative "external" forces.)
Because a conservative force's work depends only on the end points, we can assign to every position a number — the potential energy — so that the work is simply the drop in that number. The choice of the position where $U=0$ (the reference level) is ours; only differences in $U$ have physical meaning.
For a conservative force $\mathbf{F}$, the potential energy $U$ is defined (up to an additive constant) by
$$\Delta U=U_B-U_A=-W_{A\to B}=-\int_A^B\mathbf{F}\cdot d\mathbf{r}.$$The work done by a conservative force equals the decrease in potential energy. Near the Earth's surface, with the reference level at height $0$, the gravitational potential energy of a mass $m$ at height $h$ is $U=mgh$ (valid while $h$ is small compared with the Earth's radius, so that $g$ is constant).
Run the definition backwards. For a small displacement $dx$ along the $x$-axis, $dU=-F\,dx$, so the force is the negative slope of the potential-energy graph:
For a conservative force along $x$, $\qquad F(x)=-\dfrac{dU}{dx}.$
The force points "downhill" on the $U$–$x$ graph. A body is in equilibrium where $F=0$, i.e. where $\dfrac{dU}{dx}=0$:
- at a minimum of $U$ $\left(\dfrac{d^2U}{dx^2}\gt0\right)$ the equilibrium is stable — a small displacement brings a force back towards it;
- at a maximum of $U$ $\left(\dfrac{d^2U}{dx^2}\lt0\right)$ it is unstable — a small displacement brings a force pushing it further away;
- where $U$ is constant over a range it is neutral.
A marble resting at the bottom of a bowl is in stable equilibrium, one balanced on top of an upturned bowl is in unstable equilibrium, and one on a flat table is in neutral equilibrium. The same graph also shows where a body can go: with total energy $E$, it can only be where $U(x)\le E$, because $K=E-U$ cannot be negative. Points where $U=E$ are turning points, where the body momentarily stops and turns back.
A particle has potential energy $U(x)=5x^2$ (in J, $x$ in m). The force on it at $x=2\ \text{m}$ is
Spring potential energy and conservation of mechanical energy
From Result 4.3, the spring force does work $-\tfrac12k\left(x_2^2-x_1^2\right)$ when its extension changes from $x_1$ to $x_2$ — a quantity that depends only on the end points. So the spring force is conservative, and comparing with Definition 4.5 gives its potential energy.
An ideal spring of spring constant $k$, stretched or compressed by $x$ from its natural length, stores elastic potential energy
$$U=\tfrac12kx^2 \qquad(U=0 \text{ at the natural length}).$$$U$ is the same for a stretch and a compression of the same size, and it grows as the square of $x$. Check: $F=-\dfrac{dU}{dx}=-kx$, Hooke's law.
Now put the two ideas together. Split the net work on a body into the work done by conservative forces, $W_c=-\Delta U$, and the work done by all other forces, $W_\text{nc}$. The work–energy theorem says $W_c+W_\text{nc}=\Delta K$, so
$$W_\text{nc}=\Delta K+\Delta U=\Delta(K+U).$$The mechanical energy of a body (or system) is the sum of its kinetic energy and the potential energies of all the conservative forces acting: $E=K+U$, e.g. $E=\tfrac12mv^2+mgh+\tfrac12kx^2$.
If only conservative forces do work on a body (any other forces present, such as a normal force or a string tension perpendicular to the motion, do no work), its mechanical energy is constant:
$$K_i+U_i=K_f+U_f .$$The law holds in an inertial frame, for any path and for forces that vary along the path.
In general, the work done by the non-conservative forces equals the change in mechanical energy:
$$W_\text{nc}=(K_f+U_f)-(K_i+U_i).$$Kinetic friction acting over a path length $s$ does $W_\text{nc}=-f_ks$; the lost mechanical energy $f_ks$ appears as thermal energy of the surfaces. Total energy (mechanical + thermal + every other form) is always conserved.
A swinging pendulum shows the law at work: the string's tension is always perpendicular to the bob's velocity, so it does no work, and $\tfrac12mv^2+mgh$ stays fixed. A stone thrown from a cliff reaches the ground with the same speed whatever the direction of the throw, $v=\sqrt{u^2+2gH}$. And a smooth roller-coaster car passes every point of equal height with equal speed.
- Pick the two states (initial and final) and a reference level for gravitational $U$ (any convenient height — often the lowest point).
- List the forces. Conservative ones (gravity, springs) go into $U$; check whether any other force does work.
- If none does: $K_i+U_i=K_f+U_f$. If friction or an applied force does work, use $K_i+U_i+W_\text{nc}=K_f+U_f$, with $W_f=-\mu_kN\,s$.
- For springs, measure $x$ from the natural length; at maximum compression the speed is zero (or, for two moving bodies, the relative speed is zero).
- If the question also asks for a force (tension, normal force), use Newton's second law at that point, with the speed from step 3.
In the widget set $k=100\ \text{N/m}$, release stretch $x_0=20\ \text{cm}$ and $\mu_k=0.10$ (the block is $1.0\ \text{kg}$). How far past the natural length, on the other side, does the block get before it first turns back?
A spring stores $2.0\ \text{J}$ when stretched by $4.0\ \text{cm}$. How much energy does it store when stretched by $8.0\ \text{cm}$?
Motion in a vertical circle
Whirl a small stone on a string of length $r$ in a vertical circle. Two forces act: the tension $T$, always along the string towards the centre and so always perpendicular to the velocity (it does no work), and gravity, which slows the stone on the way up and speeds it up on the way down. Energy conservation therefore gives the speed at every point, and Newton's second law along the string gives the tension.
Let the stone have speed $u$ at the lowest point, and let $\theta$ be the angle of the string from the downward vertical. At angle $\theta$ the stone is $r(1-\cos\theta)$ above the bottom, so
$$v^2=u^2-2gr(1-\cos\theta).$$Along the string, towards the centre, the net force is $T-mg\cos\theta$ (the radial component of the weight points away from the centre when the stone is below the horizontal), and it must equal $mv^2/r$:
$$T=\frac{mv^2}{r}+mg\cos\theta=\frac{m}{r}\left(u^2-2gr+3gr\cos\theta\right).$$The tension is largest at the bottom ($\theta=0$) and smallest at the top ($\theta=180^\circ$). A string can only pull: if $T$ would have to become negative, the string goes slack and the stone leaves the circle as a projectile.
- $T_\text{bottom}=m\left(\dfrac{u^2}{r}+g\right)$, $\ T_\text{top}=m\left(\dfrac{v_\text{top}^2}{r}-g\right)$, with $v_\text{top}^2=u^2-4gr$. Hence $T_\text{bottom}-T_\text{top}=6mg$ whenever the stone goes right round.
- Complete circle if and only if $T_\text{top}\ge0$, i.e. $v_\text{top}\ge\sqrt{gr}$ and $u\ge\sqrt{5gr}$. At the critical speed: $T_\text{top}=0$, $T$ at the horizontal $=3mg$, $T_\text{bottom}=6mg$.
- If $\sqrt{2gr}\lt u\lt\sqrt{5gr}$, the string goes slack above the horizontal, where $\cos\theta=\dfrac{2gr-u^2}{3gr}$ (negative), and the stone then moves as a projectile.
- If $u\le\sqrt{2gr}$, the stone never rises above the level of the centre; the string stays taut and the stone swings back and forth like a pendulum.
For a bead on a circular wire, a body on a light rod, or a ball inside a circular tube, the support can push as well as pull, so the only condition is $v_\text{top}\ge0$: $u\ge\sqrt{4gr}=2\sqrt{gr}$. A body on the inside of a smooth loop-the-loop track behaves like the string case ($N\ge0$), so a car released from rest at height $H$ completes a loop of radius $r$ only if $H\ge\tfrac52r$.
Why does a string need $u\ge\sqrt{5gr}$ and not just enough energy to reach the top ($u\ge2\sqrt{gr}$)? Because at the top the stone must still be moving fast enough for gravity alone not to pull it off its circle: $mg\le mv_\text{top}^2/r$. A stone that arrives at the top too slowly has already left the circle before it gets there.
In the widget keep the string ($r=1.0\ \text{m}$, ball $0.20\ \text{kg}$) and set the speed at the bottom to $u=6.0\ \text{m/s}$. What happens?
A small ball is fixed to one end of a light rigid rod of length $r$ and whirled in a vertical circle about the other end. The least speed at the lowest point for it to go round completely is
Power
Two cranes lift identical loads to the same height; one takes ten seconds, the other a minute. They do the same work, but the first is six times more powerful. Power measures how fast work is done (or energy transferred).
The average power of a force over a time interval $\Delta t$ in which it does work $\Delta W$ is $P_\text{av}=\dfrac{\Delta W}{\Delta t}$. The instantaneous power is $P=\dfrac{dW}{dt}$.
The SI unit is the watt, $1\ \text{W}=1\ \text{J/s}$ (dimensions $[\text{ML}^2\text{T}^{-3}]$); $1\ \text{horsepower}=746\ \text{W}$. The kilowatt hour is a unit of energy, not power: $1\ \text{kWh}=1000\ \text{W}\times3600\ \text{s}=3.6\times10^6\ \text{J}$.
A force $\mathbf{F}$ acting on a body moving with velocity $\mathbf{v}$ delivers power
$$P=\frac{\mathbf{F}\cdot d\mathbf{r}}{dt}=\mathbf{F}\cdot\mathbf{v}=Fv\cos\theta .$$The work done in a time interval is $W=\displaystyle\int P\,dt$ (the area under the $P$–$t$ graph).
Vehicles. An engine working at power $P$ and moving at speed $v$ supplies a driving force $F=P/v$: large at low speed, small at high speed. The car reaches its maximum speed when the driving force has fallen to the total resistance $f$: $v_{\max}=P/f$ on the level, and $v_{\max}=\dfrac{P}{f+mg\sin\alpha}$ up a slope of angle $\alpha$. At any lower speed the net force $\dfrac{P}{v}-f$ accelerates the car.
Constant power from rest. If a body starts from rest and all of a constant power $P$ goes into kinetic energy, $\tfrac12mv^2=Pt$, so $v=\sqrt{2Pt/m}\propto t^{1/2}$; then $x=\int v\,dt\propto t^{3/2}$, and the acceleration falls as $t^{-1/2}$.
Pumps and efficiency. A pump lifting water at a rate $\dfrac{dm}{dt}$ through a height $h$ delivers useful power $\dfrac{dm}{dt}gh$ (plus $\tfrac12\dfrac{dm}{dt}v^2$ if the water leaves with speed $v$). The efficiency $\eta=\dfrac{P_\text{useful}}{P_\text{input}}$ is always less than $1$.
(b) A motor in a hospital basement lifts $1200$ litres of water per minute into a tank $10\ \text{m}$ above it ($1$ litre of water has a mass of $1\ \text{kg}$; $g=10\ \text{m/s}^2$). If the motor is $80\%$ efficient and the kinetic energy of the water is neglected, the electrical power it takes is (A) $2.5\ \text{kW}$ (B) $2.0\ \text{kW}$ (C) $1.6\ \text{kW}$ (D) $150\ \text{kW}$
1. Conservation of mechanical energy with friction present. $K_i+U_i=K_f+U_f$ holds only when non-conservative forces do no work. With friction or a push, use $K_i+U_i+W_\text{nc}=K_f+U_f$ — and remember that friction keeps acting while a spring is being compressed (Example 4).
2. The spring's $x$. In $U=\tfrac12kx^2$, $x$ is the stretch or compression from the natural length. A block dropped from height $h$ onto a spring falls $h+x$, not $h$: leaving out the extra $x$ is the usual wrong option.
3. The vertical-circle ladder. String (or the inside of a loop): $u\ge\sqrt{5gr}$ at the bottom and $v_\text{top}\ge\sqrt{gr}$; then $T_\text{top}=0$, $T$ at the horizontal $=3mg$ and $T_\text{bottom}=6mg$. Rod or tube: $u\ge\sqrt{4gr}$. Reaching only the level of the centre: $\sqrt{2gr}$. "$T_\text{bottom}-T_\text{top}=6mg$" holds only if the body really goes round.
4. Sign of $F=-dU/dx$ and the meaning of equilibrium. The force points towards lower $U$. Equilibrium is where the slope of $U$ is zero, not where $U$ is zero; it is stable at a minimum of $U$ and unstable at a maximum. Potential energy can be negative — only differences matter, so the reference level is your choice.
5. Power and energy units. The kilowatt hour is an energy, $3.6\times10^6\ \text{J}$; the watt is a power; $1\ \text{hp}=746\ \text{W}$. For pumps convert "per minute" to per second first, and divide the useful power by the efficiency to get the input. At top speed the driving force equals the resistance — the engine's power is not zero.
6. Which forces are conservative? Gravity, the spring force and the electrostatic force are; friction and air drag are not. A potential energy exists only for a conservative force, and the work of a conservative force round any closed path is zero — statement and assertion–reason questions test these two sentences.
A body starts from rest and is driven by a source of constant power, all of which goes into its kinetic energy. Its speed $v$ after time $t$ is proportional to
Exercises
Take $g=9.8\ \text{m/s}^2$ unless told otherwise. Springs and strings are light; surfaces are smooth unless friction is given.
- 1 Find the gain in gravitational potential energy of a $50\ \text{kg}$ girl who climbs $12\ \text{m}$ up a staircase.
- 2 A particle has $U(x)=3x^2-2x$ (in J, $x$ in m). Find the force on it at $x=2\ \text{m}$.
- 3 For $U(x)=2x^3-6x$ (in J, $x$ in m), find the equilibrium positions and state whether each is stable or unstable.
- 4 A particle has $U(x)=\dfrac{10}{x}$ (in J, $x$ in m, $x\gt0$). Find the size and direction of the force at $x=2\ \text{m}$.
- 5 Classify as conservative or non-conservative: gravity, the force of a spring, kinetic friction, air resistance. Give a one-line reason for friction.
- 6 A $3.0\ \text{kg}$ stone is carried $200\ \text{m}$ along a winding path up to a point $25\ \text{m}$ higher, and then down to a point $10\ \text{m}$ above its start. Find the total work done on it by gravity.
- 7 A $1.0\ \text{kg}$ block is dragged once round a square of side $2.0\ \text{m}$ on a floor with $\mu_k=0.40$, back to its starting point. Find the work done by friction. What does this show?
- 8 A $2.5\ \text{kg}$ particle moves with $U(x)=5x^2$ (in J, $x$ in m) and total mechanical energy $20\ \text{J}$. Find its turning points and its greatest speed.
- 1 Find the energy stored in a spring of $k=250\ \text{N/m}$ compressed by $8.0\ \text{cm}$.
- 2 A spring stores $0.50\ \text{J}$ when stretched by $2.0\ \text{cm}$. How much extra work is needed to stretch it from $2.0\ \text{cm}$ to $6.0\ \text{cm}$?
- 3 A ball is dropped from a height of $5.0\ \text{m}$. Find its speed just before it hits the ground.
- 4 A stone is thrown from the top of a $20\ \text{m}$ tower at $15\ \text{m/s}$. Find its speed on reaching the ground. Does the direction of the throw matter?
- 5 A $0.40\ \text{kg}$ block moving at $2.0\ \text{m/s}$ on a smooth floor hits a spring with $k=100\ \text{N/m}$. Find the maximum compression.
- 6 A $1.5\ \text{kg}$ block is dropped from $0.60\ \text{m}$ above the top of a vertical spring ($k=3000\ \text{N/m}$). Find the maximum compression.
- 7 A $2.0\ \text{kg}$ block slides from rest down a rough curved track from a height of $3.0\ \text{m}$ and reaches the bottom at $6.0\ \text{m/s}$. Find the work done by friction.
- 8 A $0.50\ \text{kg}$ block is pushed against a spring ($k=200\ \text{N/m}$), compressing it by $10\ \text{cm}$, and released on a floor with $\mu_k=0.20$. The block is not attached to the spring. Find its speed as it leaves the spring and the total distance it moves from the release point.
- 9 A roller-coaster car starts from rest at a height of $30\ \text{m}$ on a frictionless track. Find its speed at a point $12\ \text{m}$ above the ground.
- 1 Find the least speed at the lowest point for a stone on a $0.80\ \text{m}$ string to complete a vertical circle.
- 2 Repeat part 1 for a ball on a light rod of the same length.
- 3 A $0.50\ \text{kg}$ bob goes round a vertical circle on a string. Find the difference between the tensions at the lowest and highest points.
- 4 A bob on a $1.0\ \text{m}$ string is given $5.0\ \text{m/s}$ at the bottom. Show that it does not complete the circle, and find the angle above the horizontal at which the string goes slack.
- 5 A car on a smooth roller-coaster track is released from rest and must loop a circular loop of radius $10\ \text{m}$. Find the least release height above the bottom of the loop.
- 6 A $0.10\ \text{kg}$ bob on a $0.50\ \text{m}$ string moving in a vertical circle has a tension of $9.0\ \text{N}$ at the lowest point. Find its speed at the highest point.
- 7 A $0.30\ \text{kg}$ pendulum bob on a $2.0\ \text{m}$ string is released from rest with the string at $60^\circ$ to the vertical. Find the tension at the lowest point.
- 8 A small block starts from rest at the top of a smooth fixed hemisphere of radius $1.2\ \text{m}$ and slides down its outside. At what height above the centre does it leave the surface?
- 1 A crane lifts a $500\ \text{kg}$ load through $12\ \text{m}$ at constant speed in $15\ \text{s}$. Find its power output.
- 2 A pump raises $600\ \text{kg}$ of water per minute through a height of $25\ \text{m}$. Find the useful power, and the input power if the pump is $70\%$ efficient.
- 3 A force $\mathbf{F}=(4\hat{\mathbf{i}}+3\hat{\mathbf{j}})\ \text{N}$ acts on a body moving with velocity $\mathbf{v}=(2\hat{\mathbf{i}}-\hat{\mathbf{j}})\ \text{m/s}$. Find the instantaneous power.
- 4 A car's engine delivers $50\ \text{kW}$ at its maximum speed of $25\ \text{m/s}$ on a level road. Find the total resistive force.
- 5 The car in part 4 has a mass of $1200\ \text{kg}$ and meets the same resistance. Find its maximum speed up a slope with $\sin\alpha=\tfrac1{20}$.
- 6 A $2.0\ \text{kW}$ heater runs for $3.0$ hours. Find the energy used in kWh and in joules.
- 7 A $2.0\ \text{kg}$ body starts from rest and receives a constant power of $16\ \text{W}$, all of which becomes kinetic energy. Find its speed after $4.0\ \text{s}$.
- 8 The power delivered by a machine varies as $P=3t^2\ \text{W}$ ($t$ in s). Find the work done in the first $2.0\ \text{s}$.
E1. NEET · MCQ The graph shows the potential energy $U$ of a particle that moves along the $x$-axis under a conservative force alone. Which statement is correct? (A) At P the particle is in stable equilibrium (B) At Q the particle is in stable equilibrium (C) At R the force on the particle points along $+x$ (D) At S the force on the particle is zero
E2. NEET · MCQ A small stone tied to a light string moves in a vertical circle with the least speed that lets it complete the circle. Statement I: The tension in the string at the highest point is zero. Statement II: The tension in the string at the lowest point is $5mg$. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct
E3. NEET · MCQ A small body moves in a vertical circle of radius $r$. Match List-I with List-II.
List-I: (a) least speed at the lowest point for a body on a string to complete the circle (b) least speed at the lowest point for a body on a light rod to complete the circle (c) speed at the lowest point with which a body on a string just reaches the level of the centre (d) least speed at the highest point for a body on a string
List-II: (i) $\sqrt{gr}$ (ii) $\sqrt{2gr}$ (iii) $\sqrt{4gr}$ (iv) $\sqrt{5gr}$
Choose the correct answer: (A) a-iv, b-ii, c-iii, d-i (B) a-iii, b-iv, c-ii, d-i (C) a-iv, b-iii, c-i, d-ii (D) a-iv, b-iii, c-ii, d-i
E4. NEET · MCQ Assertion (A): The work done by kinetic friction on a box dragged once round a closed path on a rough floor is not zero. Reason (R): Kinetic friction is a non-conservative force. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E5. NEET · MCQ How many of the following statements are correct?
(i) $1\ \text{kWh}=3.6\times10^{6}\ \text{J}$.
(ii) The watt is a unit of energy.
(iii) The instantaneous power delivered by a force $\mathbf{F}$ to a body moving with velocity $\mathbf{v}$ is $\mathbf{F}\cdot\mathbf{v}$.
(iv) One horsepower is about $746\ \text{W}$.
(v) A car moving at its maximum steady speed on a level road needs no engine power.
(vi) The dimensional formula of power is $[\text{ML}^2\text{T}^{-3}]$.
(A) Three (B) Five (C) Four (D) Two
E6. NEET · MCQ A $2\ \text{kg}$ block is dropped from a height of $40\ \text{cm}$ above the top of a light vertical spring of spring constant $1960\ \text{N/m}$ ($g=9.8\ \text{m/s}^2$). The maximum compression of the spring is (A) $10\ \text{cm}$ (B) $8.9\ \text{cm}$ (C) $20\ \text{cm}$ (D) $5.0\ \text{cm}$
Research question. How much of a bouncing ball's mechanical energy survives each bounce, and does the fraction lost stay the same from bounce to bounce?
Why it matters. Sports bodies specify how "lively" a ball must be: a tennis ball, a cricket ball and a football must each rebound to a set height when dropped onto a standard surface. Engineers designing running tracks, playground surfaces and shock absorbers want the opposite — surfaces that absorb energy to protect joints and heads. In both cases the measurement is simple energy bookkeeping: between bounces mechanical energy is conserved, and the drop in $mgh$ at each bounce is the work of non-conservative forces inside the ball and the floor.
What to do.
- Fix a metre scale (or tape) vertically against a wall. Drop a ball from a measured height $h_0$ and film it with a phone in slow motion.
- From the video, read the peak height $h_1,h_2,h_3,\dots$ after each of the first five bounces. Repeat three times and average.
- Compute the fraction of energy kept, $h_{n+1}/h_n$, for each bounce. Is it roughly constant? Plot $\ln h_n$ against $n$ — a straight line means a constant fraction.
- Repeat on two other surfaces (tiles, carpet, grass) and with a second kind of ball.
- For one ball, estimate the energy (in J) turned into heat and sound in the first bounce: $mg(h_0-h_1)$.
Tools: Two or three balls, kitchen scale, metre scale or tape, phone with slow-motion video, spreadsheet.
Hand in: A table of bounce heights; the graph of $\ln h_n$ against $n$ with its slope; the energy fraction per bounce for each ball–surface pair; a paragraph explaining where the "lost" energy went.
Going further. Warm a squash ball in your hands (or in warm water) for a few minutes and repeat. Why do squash players "warm up" the ball before a match?
🧪 Self-check quiz
Q1. Which of these forces is non-conservative?
Q2. The mechanical energy $K+U$ of a body is conserved when
Q3. A $60\ \text{kg}$ student runs up a flight of stairs $10\ \text{m}$ high in $20\ \text{s}$ ($g=10\ \text{m/s}^2$). The average power she develops against gravity is
Q4. A stone is thrown from the top of a cliff with the same speed $u$ in three ways: horizontally, $30^\circ$ above the horizontal, and $30^\circ$ below it. Ignoring air resistance, its speed on reaching the ground at the foot of the cliff is
Q5. A spring stretched by $x$ stores energy $U$. The additional work needed to stretch it from $x$ to $2x$ is