2.4 Uniform Circular Motion
Going round a circle at steady speed is accelerated motion: the velocity keeps turning, and the acceleration $v^2/r=\omega^2r$ points to the centre. Add a tangential part when the speed changes.
A ceiling fan spins at a steady rate; a stone whirled on a string traces the same circle again and again; a satellite circles the Earth every ninety minutes; the drum of a washing machine spins the water out of the clothes. In each case the speed may not change at all — and yet the body is accelerating, because the direction of its velocity changes all the time. Something must keep pulling it off the straight line it would otherwise follow: the string, gravity, the drum wall.
This section describes motion on a circle completely. We first introduce the angular quantities — angular displacement, angular velocity and angular acceleration — that make circular motion as simple as motion in a line. Then we find the acceleration of a body moving round a circle at constant speed, the centripetal acceleration $v^2/r$, in two ways: from a geometric argument and from the vector calculus of Section 2.3. Finally we let the speed change, and add the tangential acceleration that NEET problems on cars and wheels speeding up require. Chapter 3 will supply the forces that produce these accelerations.
Describing motion on a circle: angular variables
For a particle P moving on a circle of radius $r$ with centre O, one number fixes its position: the angle $\theta$ that the radius OP makes with a fixed reference line (say the $+x$-axis). As P moves, $\theta$ changes. Measuring angles in radians links the angle directly to the distance travelled along the circle: an arc of length $s$ subtends $\theta=s/r$ radians, so a full turn is $2\pi\ \text{rad}=360^\circ$.
For a particle on a circle of radius $r$:
- The angular displacement $\Delta\theta$ is the angle turned through by the radius in a time interval, in radians: $\Delta\theta=\Delta s/r$.
- The angular velocity is the rate of change of the angle, $\omega=\dfrac{d\theta}{dt}$ (unit $\text{rad/s}$); its average over an interval is $\bar\omega=\dfrac{\Delta\theta}{\Delta t}$.
- Motion on a circle with constant speed (constant $\omega$) is called uniform circular motion. Its period $T$ is the time for one revolution and its frequency $\nu=1/T$ is the number of revolutions per second (unit $\text{Hz}=\text{s}^{-1}$).
As a vector, $\vec{\omega}$ points along the axis of rotation, in the direction given by the right-hand rule: curl the fingers of the right hand the way the particle goes round, and the thumb points along $\vec{\omega}$. For motion anticlockwise in the $xy$-plane (seen from $+z$), $\vec{\omega}=\omega\,\hat{\mathbf{k}}$.
For a particle moving on a circle of radius $r$, with $\theta$ in radians,
$$s=r\theta,\qquad v=\frac{ds}{dt}=\omega r .$$In uniform circular motion $\omega=\dfrac{2\pi}{T}=2\pi\nu$ and $v=\dfrac{2\pi r}{T}$. In vector form the velocity is $\mathbf{v}=\vec{\omega}\times\mathbf{r}$, where $\mathbf{r}$ is the position vector from the centre: it is tangent to the circle, perpendicular to $\mathbf{r}$.
All points of a rigid body turning about a fixed axis — every point of a fan blade, every point of a wheel — share the same $\omega$, but their speeds $v=\omega r$ grow with distance from the axis. Machines are often rated in revolutions per minute (rpm): to convert, $\omega=\dfrac{2\pi\times(\text{rpm})}{60}\ \text{rad/s}$.
Points P and Q on a fan blade are $0.20\ \text{m}$ and $0.40\ \text{m}$ from the axis. While the fan turns steadily,
Centripetal acceleration
In uniform circular motion the speed is constant, but the velocity — always tangent to the circle — turns through $2\pi$ every revolution. A changing velocity means an acceleration. Two questions: how large is it, and which way does it point?
Geometric argument. Let the particle move from P to Q in a short time $\Delta t$, the radius turning through a small angle $\Delta\theta$. The position vectors $\mathbf{r}_1$, $\mathbf{r}_2$ both have length $r$; the velocities $\mathbf{v}_1$, $\mathbf{v}_2$ both have length $v$ and are perpendicular to them, so they too are separated by the angle $\Delta\theta$. Draw $\mathbf{v}_1$ and $\mathbf{v}_2$ from a common point: the triangle they form with $\Delta\mathbf{v}=\mathbf{v}_2-\mathbf{v}_1$ is similar to the triangle OPQ (both isosceles with apex angle $\Delta\theta$). Hence
$$\frac{|\Delta\mathbf{v}|}{v}=\frac{|\Delta\mathbf{r}|}{r}\quad\Longrightarrow\quad \frac{|\Delta\mathbf{v}|}{\Delta t}=\frac{v}{r}\,\frac{|\Delta\mathbf{r}|}{\Delta t}.$$As $\Delta t\to0$, $|\Delta\mathbf{r}|/\Delta t\to v$ (the chord becomes the arc), so $|\mathbf{a}|=v^2/r$. And as $\Delta\theta\to0$ the vector $\Delta\mathbf{v}$ becomes perpendicular to $\mathbf{v}$, pointing along $-\mathbf{r}$: towards the centre.
Vector (calculus) derivation. Put the centre at the origin and let the particle move anticlockwise with constant $\omega$, starting on the $+x$-axis, so $\theta=\omega t$:
$$\mathbf{r}=r\cos\omega t\,\hat{\mathbf{i}}+r\sin\omega t\,\hat{\mathbf{j}},$$ $$\mathbf{v}=\frac{d\mathbf{r}}{dt}=-\omega r\sin\omega t\,\hat{\mathbf{i}}+\omega r\cos\omega t\,\hat{\mathbf{j}},$$ $$\mathbf{a}=\frac{d\mathbf{v}}{dt}=-\omega^2r\cos\omega t\,\hat{\mathbf{i}}-\omega^2r\sin\omega t\,\hat{\mathbf{j}}=-\omega^2\,\mathbf{r}.$$So $|\mathbf{v}|=\omega r$, $\ \mathbf{v}\cdot\mathbf{r}=0$ (tangent), and the acceleration is $\omega^2r$ in magnitude, directed opposite to $\mathbf{r}$ — towards the centre — at every instant. The two derivations agree, since $\omega^2r=(v/r)^2r=v^2/r$.
A particle in uniform circular motion with speed $v$ and angular velocity $\omega$ on a circle of radius $r$ has an acceleration directed towards the centre of the circle (the centripetal acceleration), of magnitude
$$a_c=\frac{v^2}{r}=\omega^2r=\omega v=\frac{4\pi^2r}{T^2}.$$In vector form, with $\mathbf{r}$ measured from the centre, $\mathbf{a}_c=-\omega^2\mathbf{r}$. Its magnitude is constant but its direction turns with the particle, so $\mathbf{a}_c$ is not a constant vector, and the equations of Theorem 2.8 (constant acceleration) do not apply to circular motion.
In Interactive 1 leave $r=1.5\ \text{m}$ and $\omega=1.2\ \text{rad/s}$. As you shrink $\Delta\theta$ from $120^\circ$ down to $5^\circ$, the average acceleration $|\Delta\mathbf{v}|/\Delta t$
A particle keeps the same period but moves onto a circle of twice the radius. Its centripetal acceleration
Non-uniform circular motion: tangential acceleration
A car pulling away round a roundabout, a fan just switched on, a wheel being braked: these move on circles with changing speed. Now the velocity changes in two ways at once — in direction, which needs the centripetal acceleration $v^2/r$ as before, and in magnitude, which needs an acceleration along the velocity.
NEET's syllabus names uniform circular motion in this unit and the equations of rotational motion in Unit 5 (Section 5.4). Questions on a car, a fan or a wheel speeding up use both, so the few results they need are collected here.
For a particle on a circle of radius $r$, the angular acceleration is the rate of change of angular velocity, $\alpha=\dfrac{d\omega}{dt}$ (unit $\text{rad/s}^2$). The tangential acceleration is the rate of change of speed, $a_t=\dfrac{dv}{dt}=r\alpha$, directed along the tangent (forwards if the particle is speeding up, backwards if it is slowing down). Motion on a circle with $a_t\ne0$ is non-uniform circular motion.
A particle moving on a circle of radius $r$ with instantaneous speed $v$ has acceleration with two perpendicular components, the centripetal component $a_c=v^2/r$ (towards the centre) and the tangential component $a_t=dv/dt$ (along the velocity):
$$\mathbf{a}=\mathbf{a}_c+\mathbf{a}_t,\qquad |\mathbf{a}|=\sqrt{a_c^2+a_t^2},\qquad \tan\phi=\frac{a_t}{a_c},$$where $\phi$ is the angle between $\mathbf{a}$ and the radius drawn towards the centre. The net acceleration points to the centre only in uniform circular motion ($a_t=0$).
To see where this comes from, write $\mathbf{v}=v\,\hat{\mathbf{t}}$, with $\hat{\mathbf{t}}$ the unit tangent. Differentiating, $\mathbf{a}=\dfrac{dv}{dt}\hat{\mathbf{t}}+v\dfrac{d\hat{\mathbf{t}}}{dt}$. The first term changes the speed; the second only turns the velocity, and by the argument of Theorem 2.13 (applied to a unit vector turning at rate $\omega=v/r$) it has magnitude $v\cdot v/r$ and points to the centre.
If the angular acceleration $\alpha$ is constant, with initial angular velocity $\omega_0$ and $\theta=0$ at $t=0$, then
$$\omega=\omega_0+\alpha t,\qquad \theta=\omega_0t+\tfrac12\alpha t^2,\qquad \omega^2=\omega_0^2+2\alpha\theta .$$These mirror the equations of uniformly accelerated motion (Section 2.1) with $x\to\theta$, $v\to\omega$, $a\to\alpha$; multiplying by $r$ gives the same equations for arc length $s$, speed $v$ and a constant tangential acceleration $a_t$.
In Interactive 2, with $r=2\ \text{m}$ and $a_t=0.5\ \text{m/s}^2$, the net acceleration reaches $45^\circ$ to the radius ($a_c=a_t$) at $t=2\ \text{s}$. If you double $a_t$ to $1.0\ \text{m/s}^2$ (same $r$), that moment comes
(b) A particle moves on a circle of radius $2\ \text{m}$ with speed $v=4t$ ($v$ in m/s, $t$ in s). At $t=1\ \text{s}$ the angle between its net acceleration and its velocity is (A) $45^\circ$ (B) $\tan^{-1}\tfrac12$ (C) $\tan^{-1}2$ (D) $90^\circ$
1. "Uniform circular motion has zero acceleration". Uniform refers to the speed only. The velocity and acceleration vectors both change direction all the time; only their magnitudes ($v$, $v^2/r$), $\omega$ and the period are constant. "The acceleration of a body in uniform circular motion is constant" is a false statement — its magnitude is.
2. Forgetting to convert rpm. $\omega$ in $a_c=\omega^2r$ and $v=\omega r$ must be in rad/s: multiply rpm by $2\pi/60$ (or rev/s by $2\pi$). Using rev/s directly makes $a_c$ wrong by a factor of $(2\pi)^2\approx39$.
3. Using the diameter or the height above the surface. $r$ is the radius of the circle actually traced — for a satellite, measured from the Earth's centre (Example 4).
4. Net acceleration "towards the centre" in non-uniform motion. If the speed changes, $\mathbf{a}$ has a tangential part and is tilted from the radius by $\phi=\tan^{-1}(a_t/a_c)$. Add $a_c$ and $a_t$ as perpendicular vectors, never as numbers, and check whether the question measures the angle from the radius or from the velocity (Example 7).
5. Average versus instantaneous. Over a finite arc the average acceleration $|\Delta\mathbf{v}|/\Delta t$ is less than $v^2/r$ (Example 2); over a full lap the average velocity and the average acceleration are both zero, although the average speed is $v$.
6. Same $\omega$, different $v$. All points of a fan blade or a clock hand share one $\omega$; their speeds and centripetal accelerations grow with $r$. With the same period, $a_c\propto r$; with the same speed, $a_c\propto1/r$ — decide which is held fixed before choosing a formula.
A car goes round a circular bend while braking, so its speed is decreasing. Its net acceleration points
Exercises
Take $g=9.8\ \text{m/s}^2$. "rpm" means revolutions per minute. Motion is anticlockwise in the $xy$-plane when a direction is needed.
- 1 Express $300\ \text{rpm}$ in rad/s.
- 2 Find the angular speeds of the second hand, the minute hand and the hour hand of a clock.
- 3 Find the angular speed of the Earth's rotation about its axis (take one rotation in $24\ \text{h}$).
- 4 A point on the rim of a wheel of radius $0.30\ \text{m}$ moves $6.0\ \text{m}$ along its circular path. Through what angle has the wheel turned, in radians and in revolutions?
- 5 A particle moves on a circle of radius $2.0\ \text{m}$ at a steady $4.0\ \text{m/s}$. Find its angular speed and period.
- 6 The tip of a fan blade, $0.60\ \text{m}$ from the axis, moves at $25\ \text{m/s}$. Find the angular speed in rad/s and in rpm.
- 7 The minute hand of a clock is $6.0\ \text{cm}$ long and the hour hand $4.0\ \text{cm}$. Find the ratio of the speeds of their tips.
- 8 The angle turned by a disc is $\theta=2t^2+3t$ (radians, $t$ in seconds). Find its angular velocity at $t=2.0\ \text{s}$ and its angular acceleration.
- 1 A car takes a curve of radius $50\ \text{m}$ at a steady $15\ \text{m/s}$. Find its centripetal acceleration.
- 2 A stone on a string $0.80\ \text{m}$ long is whirled in a horizontal circle at $2.0$ revolutions per second. Find its centripetal acceleration.
- 3 The Moon goes round the Earth in a nearly circular orbit of radius $3.84\times10^8\ \text{m}$ once every $27.3$ days. Find its centripetal acceleration.
- 4 Find the centripetal acceleration of a point on the equator due to the Earth's rotation ($R_E=6.37\times10^6\ \text{m}$). Express it as a fraction of $g$.
- 5 At what speed does a rider going round a circle of radius $10\ \text{m}$ have a centripetal acceleration equal to $g$?
- 6 By what factor does the centripetal acceleration change if the speed is doubled and the radius halved?
- 7 Two particles move on circles of radii in the ratio $1:3$. Find the ratio of their centripetal accelerations if (a) they have the same angular speed, (b) they have the same linear speed.
- 8 A particle moves at $10\ \text{m/s}$ on a circle of radius $5.0\ \text{m}$. Find the magnitude of its average acceleration over half a revolution and compare it with its instantaneous acceleration.
- 9 A particle moves anticlockwise with $\omega=3.0\ \text{rad/s}$ on a circle centred at the origin. At one instant $\mathbf{r}=(4.0\,\hat{\mathbf{i}}-3.0\,\hat{\mathbf{j}})\ \text{m}$. Find $\mathbf{v}$ and $\mathbf{a}$ then.
- 1 A car on a circular track of radius $40\ \text{m}$ speeds up uniformly from $10\ \text{m/s}$ to $14\ \text{m/s}$ in $2.0\ \text{s}$. Find its tangential acceleration, and the magnitude of its net acceleration at the instant its speed is $12\ \text{m/s}$.
- 2 For the car in part 1, at the same instant, find the angle between its net acceleration and the radius towards the centre.
- 3 A fan running at $600\ \text{rpm}$ is switched off and slows uniformly to rest in $30\ \text{s}$. Find its angular acceleration and the number of revolutions it makes before stopping.
- 4 A wheel starts from rest with a constant angular acceleration of $3.0\ \text{rad/s}^2$. Find its angular velocity and the angle turned after $4.0\ \text{s}$.
- 5 A particle moves on a circle of radius $0.50\ \text{m}$ with speed $v=2t$ (m/s, $t$ in s). Find the magnitude of its acceleration at $t=1.0\ \text{s}$.
- 6 For a particle in uniform circular motion, state which of these are constant: speed, velocity, magnitude of acceleration, acceleration vector, angular velocity vector.
- 7 A particle starts from rest on a circle of radius $2.0\ \text{m}$ with constant tangential acceleration $1.0\ \text{m/s}^2$. When is its centripetal acceleration twice its tangential acceleration, and through what angle has it turned by then?
- 1 A laboratory centrifuge must produce a centripetal acceleration of $1.0\times10^4\,g$ at $10\ \text{cm}$ from its axis. At how many rpm must it spin?
- 2 Two runners start together from the same point of a circular track, with angular speeds $0.20\ \text{rad/s}$ and $0.30\ \text{rad/s}$. When do they next meet if they run (a) in the same direction, (b) in opposite directions?
- 3 A particle moves on a circle of radius $1.0\ \text{m}$ with $\theta=t^3$ (radians, $t$ in s). Find its centripetal, tangential and net acceleration at $t=1.0\ \text{s}$.
- 4 (Modelling) An astronaut-training centrifuge has an arm $8.0\ \text{m}$ long. What angular speed (in rad/s and rpm) and what speed of the cabin give a centripetal acceleration of $6.0\,g$?
- 5 The Earth orbits the Sun on a nearly circular path of radius $1.50\times10^{11}\ \text{m}$ in $365.25$ days. Find its orbital speed and centripetal acceleration.
- 6 A particle moving at a constant $5.0\ \text{m/s}$ on a circle turns through $60^\circ$ in $2.0\ \text{s}$. Find the radius, the centripetal acceleration and the magnitude of the change in velocity over those $2.0\ \text{s}$.
E1. NEET · MCQ A particle moves anticlockwise on the circle shown, centre O, and its speed is increasing. At the instant it passes P, which arrow can represent its acceleration? Arrow 1 is along the tangent, arrow 2 points to the centre, and arrows 3 and 4 make $45^\circ$ with the radius PO. (A) 1 (B) 2 (C) 3 (D) 4
E2. NEET · MCQ Assertion (A): A body moving on a circle with constant speed is accelerated. Reason (R): The direction of its velocity changes continuously. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E3. NEET · MCQ A particle is in uniform circular motion. Match each change in List-I with the factor by which its centripetal acceleration changes, in List-II.
List-I: (a) speed doubled, same radius (b) angular speed halved, same radius (c) same period, radius doubled (d) same speed, radius doubled
List-II: (i) $2$ (ii) $4$ (iii) $\tfrac12$ (iv) $\tfrac14$
Choose the correct answer: (A) a-ii, b-iii, c-i, d-iv (B) a-ii, b-iv, c-i, d-iii (C) a-i, b-iv, c-ii, d-iii (D) a-iv, b-ii, c-i, d-iii
E4. NEET · MCQ A particle moves on a circle of radius $r$ with constant speed $v$. Statement I: Its average velocity over one complete revolution is zero. Statement II: The magnitude of its average acceleration over half a revolution is $v^2/r$. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct
E5. NEET · MCQ For a particle in uniform circular motion about a fixed axis, how many of the following remain constant?
speed, velocity, angular velocity, magnitude of the acceleration, acceleration, period, position vector from the centre
(A) Three (B) Five (C) Two (D) Four
E6. NEET · MCQ A car moves on a circular track of radius $100\ \text{m}$. At one instant its speed is $20\ \text{m/s}$ and is increasing at $3\ \text{m/s}^2$. The magnitude of its acceleration at that instant is (A) $7\ \text{m/s}^2$ (B) $5\ \text{m/s}^2$ (C) $4\ \text{m/s}^2$ (D) $1\ \text{m/s}^2$
Research question. Does a phone's accelerometer really read $\omega^2r$ when it is carried round in a circle?
Why it matters. Centrifuges in hospitals separate blood plasma at thousands of $g$; fighter pilots and astronauts train in human centrifuges; engineers design rides, turbines and hard-disk platters around the centripetal acceleration their parts must survive. The smartphone in your pocket contains the same kind of MEMS accelerometer used in cars and drones, so you can test Theorem 2.13 directly.
What to do.
- Tape a phone flat on a rotating platform (a lazy Susan, a record turntable, or a swivel chair) at a measured distance $r$ from the axis, with one sensor axis pointing along the radius. Use a free sensor app that logs acceleration.
- Spin the platform at a steady rate. Time 10 revolutions to find $T$ and hence $\omega=2\pi/T$; record the mean radial acceleration reading.
- Repeat for at least five different rates and two or three radii. Plot the measured acceleration against $\omega^2r$.
- Is the graph a straight line through the origin with slope 1? Spin up the platform from rest and look for the tangential component while the rate is changing.
Tools: Smartphone with a sensor-logging app, a rotating platform, tape, metre rule, stopwatch, spreadsheet.
Hand in: Your table and graph, the fitted slope with its uncertainty, and a paragraph on the main sources of error (the sensor's position inside the phone, wobble, timing).
Going further. Many apps also read the gyroscope, which gives $\omega$ directly. Compare it with your timed value, and use both to estimate where inside the phone the accelerometer chip sits (the $r$ that makes your data fit best).
🧪 Self-check quiz
Q1. For a particle in uniform circular motion, which quantity is constant?
Q2. A stone tied to a string is whirled in a horizontal circle. If the string snaps, just after that the stone moves
Q3. If the angular speed of a particle on a circle of fixed radius is doubled, its centripetal acceleration becomes
Q4. The ratio of the angular speed of the minute hand of a clock to that of its hour hand is
Q5. A particle moves on a circle of radius $1\ \text{m}$ at a constant speed of $2\ \text{m/s}$. The magnitude of the change in its velocity during a quarter of a revolution is