Chapter 3 · Introduction

Chapter 3 — Laws of Motion

Chapter 2 described motion; this chapter explains it. Force changes momentum, forces come in action–reaction pairs, and with free-body diagrams, friction and the centripetal force you can solve blocks, pulleys, lifts and cars on curves.

Ride a fast lift in a tall building with a bathroom scale under your feet and watch the reading: it jumps up as the lift starts upwards, settles back to your true weight while the lift cruises, and drops below it as the lift slows near the top. A loaded truck brakes hard and the crates on its open deck slide forward although nothing pushed them. A bus takes a hairpin bend on a ghat road and the passengers sway outwards, while the road itself is tilted to help the bus round. A rifle kicks back into the shooter's shoulder. None of these needs a new law of nature — each is the same three laws at work.

Newton's first law says a body keeps its velocity unless a net force acts; the second law says how fast the force changes its momentum, $\mathbf{F}=\dfrac{d\mathbf{p}}{dt}$, which becomes $\mathbf{F}=m\mathbf{a}$ for a fixed mass; the third law pairs every force with an equal and opposite one on the other body, and from it follows the conservation of momentum. To use the laws you will learn one skill above all: isolate each body, draw a free-body diagram, and write $\sum\mathbf{F}=m\mathbf{a}$ for it — for blocks in contact, strings over pulleys, lifts and accelerating frames. Then come the two forces that make everyday life possible: friction, which adjusts itself up to $\mu_sN$, and the centripetal force $mv^2/r$ that friction, tension, the normal force or gravity must supply for anything to move on a curve. Laws of motion is one of the most heavily tested units of NEET Physics, and its methods return in work and energy, rotation, gravitation and the motion of charges in fields.

In NEET this chapter comes in two flavours: quick one-step numericals — an impulse read from a graph, the tension in a pulley system, an apparent weight in a lift, a friction force, a safe speed on a curve — and statement questions on the laws themselves: what inertia is, which two forces form an action–reaction pair, when momentum is conserved, which way friction acts. Both reward the same habit: draw the forces first, then let the options guide you. The NEET syllabus for this unit (the three laws, momentum and impulse, conservation of linear momentum, equilibrium of concurrent forces, static, kinetic and rolling friction and the laws of friction, and the centripetal force for vehicles on level and banked roads) is covered completely by the four sections below, together with the standard applications that NEET questions build on — connected bodies, lifts, the conical pendulum and the top and bottom of a vertical circle.

Inertia→First law→$\mathbf{F}=\tfrac{d\mathbf{p}}{dt}$→Impulse→Third law→Momentum conservation→Free-body diagrams→Pseudo force→$f_s\le\mu_sN$→$F_c=\tfrac{mv^2}{r}$
🎯 By the end of this chapter you can…
  • state Newton's three laws, explain inertia and inertial frames, and use $\mathbf{F}=\dfrac{d\mathbf{p}}{dt}$ and $\mathbf{F}=m\mathbf{a}$ in vector and component form;
  • use impulse $\mathbf{J}=\Delta\mathbf{p}$ and the area under a force–time graph for bat-and-ball, catching and machine-gun problems;
  • identify action–reaction pairs and use conservation of linear momentum for recoil and explosions;
  • find unknown forces for a particle in equilibrium under concurrent forces, by components or by Lami's theorem;
  • draw free-body diagrams and solve problems on blocks in contact, the Atwood machine, table pulleys and movable pulleys with constraint relations;
  • find the apparent weight in a lift and use the pseudo force $-m\mathbf{a}_0$ in an accelerating frame;
  • decide whether friction is static or kinetic, use $f_s\le\mu_sN$, $f_k=\mu_kN$ and the angle of repose, and solve rough inclines and stacked blocks;
  • find the speed limits for a vehicle on a level or banked curve and analyse a conical pendulum and the top and bottom of a vertical circle;
  • solve NEET multiple-choice questions on the laws of motion in every format the paper uses — single answer, statement I / II, assertion–reason, matching lists and "how many are correct" — quickly, by eliminating options.

A $4\ \text{kg}$ block rests on a rough table ($\mu_s=0.5$, $\mu_k=0.4$). A string from it runs over a light pulley at the edge to a hanging mass of $1.5\ \text{kg}$. What friction force does the table exert on the block?

Set the hanging mass to $1.5\ \text{kg}$. The pull of the string is $m_2g=14.7\ \text{N}$, less than the limit $\mu_sN=0.5\times4\times9.8=19.6\ \text{N}$, so the block stays at rest and the readout shows static friction $14.7\ \text{N}$ — exactly what is needed to balance the tension, no more (Section 3.3). Now try $3\ \text{kg}$: the pull $29.4\ \text{N}$ beats $19.6\ \text{N}$, friction drops to the kinetic value $15.68\ \text{N}$, and the readouts show $a=1.96\ \text{m/s}^2$ and $T=23.52\ \text{N}$ — less than $m_2g$, because the hanging mass is accelerating downwards (Section 3.2).
Teaser — A Block, a String and a Rough Table

A $4\ \text{kg}$ block on a rough table ($\mu_s=0.5$, $\mu_k=0.4$, $g=9.8\ \text{m/s}^2$) is tied by a light string, over a light frictionless pulley, to a hanging mass $m_2$. The arrows are the free-body diagrams of the two bodies, drawn to scale: tension (blue), friction (red), weight (purple), normal force (green). Choose $m_2$ and press Play.

1.5 kg
friction on the block—
acceleration $a$—
tension $T$—

Sections in this chapter

🎯 Chapter mixed test NEET · MCQ

Eight NEET-style questions drawn from all four sections and shuffled, as in the real paper, where nothing tells you which idea a question needs; several need two sections at once. Answer each one and press Submit (NEET marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test. The test clock is generous: at real NEET pace — about a minute per question — you should finish all eight in ten minutes, so try to beat it comfortably. Start every problem with a free-body diagram, even a rough one in the margin.

E1. NEET · MCQ A $0.50\ \text{kg}$ ball is dropped from a height of $5.0\ \text{m}$ onto a hard floor and rebounds to a height of $1.25\ \text{m}$. The ball is in contact with the floor for $0.050\ \text{s}$. Taking $g=10\ \text{m/s}^2$, the average force exerted by the floor on the ball is (A) $150\ \text{N}$ (B) $155\ \text{N}$ (C) $50\ \text{N}$ (D) $55\ \text{N}$

Speeds It strikes at $\sqrt{2(10)(5.0)}=10\ \text{m/s}$ downwards and leaves at $\sqrt{2(10)(1.25)}=5.0\ \text{m/s}$ upwards (Section 2.1).
Impulse Up positive: $\Delta p=0.50\,(5.0-(-10))=7.5\ \text{N s}$, so the net average force is $\dfrac{7.5}{0.050}=150\ \text{N}$ upwards (Result 3.3).
Floor force The net force is $N-mg$, so $N=150+0.50\times10=155\ \text{N}$.
Answer (B) $155\ \text{N}$.
⏱ Shortcut (A) forgets that the floor must also hold up the weight during contact; (C) and (D) subtract the speeds instead of adding them — a rebound reverses the velocity.

E2. NEET · MCQ A crate rests on the flat, rough floor of a truck; the coefficient of static friction between them is $\mu_s$. The truck accelerates forward at $a$ on a level road. Statement I: The crate moves along with the truck, without sliding on its floor, provided $a\le\mu_sg$. Statement II: While the crate moves along with the truck, the friction on it acts in the direction of the truck's acceleration. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement I The only horizontal force on the crate is friction, so it can accelerate at most at $\dfrac{\mu_smg}{m}=\mu_sg$ (Section 3.3). Correct.
Statement II The crate accelerates forward with the truck, so the force producing that acceleration — friction — points forward. Correct: friction opposes the crate's tendency to slide backwards relative to the floor, not its motion.
Answer (A).
⏱ Shortcut Ask "what makes the crate speed up?" Only friction acts horizontally, so it must point the way the crate accelerates.

E3. NEET · MCQ A $1200\ \text{kg}$ car goes over a hump-backed bridge whose top is a vertical arc of radius $10\ \text{m}$. Taking $g=10\ \text{m/s}^2$, the greatest speed at which the car can pass the top without losing contact with the road is (A) $100\ \text{m/s}$ (B) $5\ \text{m/s}$ (C) $10\sqrt2\ \text{m/s}$ (D) $10\ \text{m/s}$

Radial equation At the top the centre is below the car: $mg-N=\dfrac{mv^2}{r}$ (Result 3.15), so $N=m\left(g-\dfrac{v^2}{r}\right)$.
Losing contact $N\ge0$ requires $v^2\le gr=100$.
Answer (D) $10\ \text{m/s}$.
⏱ Shortcut The mass cancels — the $1200\ \text{kg}$ is a distractor. (A) forgets the square root, (C) is $\sqrt{2gr}$.

E4. NEET · MCQ Assertion (A): The apparent weight of a person standing in a lift that accelerates upwards is greater than the person's true weight. Reason (R): The mass of a body is a measure of its inertia. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Assertion True: $N=m(g+a)\gt mg$ for an upward acceleration (Result 3.9).
Reason True (Definition 3.1) — but it does not explain A. The explanation is that the floor must supply the extra force $ma$ needed to accelerate the person upwards.
Answer (B).
⏱ Shortcut When both are true, try reading "A, because R". "Heavier in an accelerating lift because mass measures inertia" says nothing about the lift — so not (A).

E5. NEET · MCQ A $2.0\ \text{kg}$ block is given a push along a rough horizontal floor and then slides freely. Its velocity–time graph from the moment it is released is shown. Taking $g=10\ \text{m/s}^2$, the coefficient of kinetic friction between the block and the floor is (A) $2.5$ (B) $0.125$ (C) $0.25$ (D) $0.40$
1 2 3 4 5 10 5 0 v (m/s) t (s)

Slope The deceleration is the magnitude of the slope: $a=\dfrac{10}{4}=2.5\ \text{m/s}^2$ (Section 2.1).
Friction Only kinetic friction acts horizontally: $\mu_kmg=ma$, so $\mu_k=\dfrac{a}{g}=\dfrac{2.5}{10}$ (Law 3.11).
Answer (C) $0.25$.
⏱ Shortcut For a body sliding to rest on a level floor, $\mu_k=a/g$ — the mass is not needed. (A) is the deceleration itself, (B) divides it by the weight $mg$ instead of $g$, and (D) is the slope upside down, $t/v$.

E6. NEET · MCQ Strings and pulleys are light, the pulleys are frictionless and tables are smooth; take $g=10\ \text{m/s}^2$. Match each system in List-I with the acceleration of its blocks in List-II.
List-I: (a) an Atwood machine with $3\ \text{kg}$ and $2\ \text{kg}$ (b) a $3\ \text{kg}$ block on a table pulled over an edge pulley by a hanging $2\ \text{kg}$ block (c) a $2\ \text{kg}$ block on a table pulled over an edge pulley by a hanging $3\ \text{kg}$ block (d) an Atwood machine with $2\ \text{kg}$ and $2\ \text{kg}$, given a push
List-II: (i) $6\ \text{m/s}^2$ (ii) $0$ (iii) $4\ \text{m/s}^2$ (iv) $2\ \text{m/s}^2$
Choose the correct answer: (A) a-iv, b-i, c-iii, d-ii (B) a-iii, b-iv, c-i, d-ii (C) a-iv, b-iii, c-ii, d-i (D) a-iv, b-iii, c-i, d-ii

One rule $a=$ (net driving force along the string) $\div$ (total mass), Result 3.8.
Each system (a) $\dfrac{(3-2)10}{5}=2$, (iv). (b) $\dfrac{2\times10}{5}=4$, (iii). (c) $\dfrac{3\times10}{5}=6$, (i). (d) equal masses: $0$ — they keep the speed of the push, (ii).
Answer (D) a-iv, b-iii, c-i, d-ii.
⏱ Shortcut Systems (a)–(c) all have a total mass of $5\ \text{kg}$, so each acceleration is simply the driving force divided by $5$: $10\to2$, $20\to4$, $30\to6$. Equal masses, as in (d), always give zero.

E7. NEET · MCQ How many of the following quantities are independent of the mass of the body concerned?
(i) the angle of repose of a block on a given incline
(ii) the maximum safe speed of a car on a given level curve
(iii) the acceleration of a block sliding down a given rough incline
(iv) the friction force on a block resting on a given incline
(v) the angle of the string of a conical pendulum of given length and angular speed
(vi) the tension in the string of that conical pendulum
(A) Five (B) Three (C) Four (D) Six

Check each (i) $\tan\theta_r=\mu_s$ ✓. (ii) $v_{\max}=\sqrt{\mu_srg}$ ✓. (iii) $a=g(\sin\theta-\mu_k\cos\theta)$ ✓. (iv) $f=mg\sin\theta$ ✗. (v) $\cos\theta=\dfrac{g}{\omega^2L}$ ✓. (vi) $T=m\omega^2L$ ✗.
Answer (C) four: (i), (ii), (iii) and (v).
⏱ Shortcut Accelerations, angles and speeds that come from "force $\propto m$ = $m\times$ acceleration" lose the mass; the forces themselves (friction, tension) keep it.

E8. NEET · MCQ A $10\ \text{kg}$ lamp hangs from the midpoint of a light rope whose two ends are fixed at the same level, so that each half of the rope makes $30^\circ$ with the horizontal. Taking $g=10\ \text{m/s}^2$, the tension in the rope is (A) $100\ \text{N}$ (B) $50\ \text{N}$ (C) $57.7\ \text{N}$ (D) $200\ \text{N}$

Equilibrium By symmetry both halves carry the same tension $T$; their horizontal components cancel and their vertical components hold the lamp: $2T\sin30^\circ=mg=100\ \text{N}$ (Result 3.6).
Answer (A) $T=100\ \text{N}$ — as large as the whole weight.
⏱ Shortcut (B) shares the weight between the halves but ignores the angle; (C) takes the angle from the vertical; (D) forgets that there are two halves. The flatter a rope, the larger its tension — a nearly straight rope cannot hold even a small weight.
✅ Before you start
You will use the equations of uniformly accelerated motion (Section 2.1) in almost every problem, and the area under a graph (Section 2.1) for impulse. Forces are vectors: you need vector addition and, above all, resolving a vector into components along chosen axes (Section 2.2), and motion in a plane with constant acceleration (Section 2.3). Section 3.4 is built on centripetal acceleration $a_c=v^2/r=\omega^2r$ (Section 2.4). Keep the dimension check of Section 1.2 handy for every formula you derive. From mathematics: $\sin$, $\cos$, $\tan$ of standard angles and solving two or three simultaneous linear equations.