Chapter 14 · Electromagnetic Induction and Alternating Currents

14.1 Faraday's Law, Lenz's Law and Motional EMF

Change the magnetic flux through a circuit and an emf appears in it: $\varepsilon=-N\,d\Phi_B/dt$. The minus sign is Lenz's law — the induced current always opposes the change — and a conductor moving through a field carries its own emf, $\varepsilon=Blv$.

In 1831 Michael Faraday wound two coils of wire on one iron ring, connected a battery to the first and a galvanometer to the second, and watched. With a steady current in the first coil, the galvanometer showed nothing. But at the instant he closed the switch the needle kicked one way, and at the instant he opened it the needle kicked the other way. Pushing a bar magnet into a coil did the same thing; holding the magnet still inside the coil did nothing. Joseph Henry in America found the same effect at about the same time. A magnetic field can drive a current — but only while something is changing.

That discovery, electromagnetic induction, is how almost all the world's electricity is generated: in power stations, wind turbines and car alternators a magnet and a coil move relative to each other. It also runs induction cooktops, wireless phone chargers, card readers and the guitar pick-up. In this section we define magnetic flux, state Faraday's law for the size of the induced emf and Lenz's law for its direction, show that Lenz's law is energy conservation in disguise, and work out the emf of a conductor moving through a field — a rod sliding on rails and a rod or disc spinning in a field — problems that NEET sets almost every year. NEET asks about this section in short MCQs: the flux through a tilted coil, the average emf and the induced charge when the flux changes, the direction of an induced current by Lenz's law (and whether a magnet is attracted or repelled), the emf of a rod on rails or of a rotating rod, and statements about Faraday's and Lenz's laws to be judged true or false.

Magnetic flux and electromagnetic induction

Faraday's experiments all have one feature in common. In each case, the number of magnetic field lines threading the coil was changing: the magnet came nearer (more lines), went away (fewer lines), or the current in the first coil grew or died away. The quantity that measures "how much field passes through a surface" is the magnetic flux, defined exactly like the electric flux of Section 11.2.

📘 Definition 14.1 — Magnetic flux

For a flat surface of area $A$ in a uniform magnetic field $\mathbf B$, the magnetic flux through the surface is

$$\Phi_B=\mathbf B\cdot\mathbf A=BA\cos\theta,$$

where the area vector $\mathbf A$ has magnitude $A$ and points along the normal to the surface, and $\theta$ is the angle between $\mathbf B$ and that normal. If the field varies over the surface, divide it into small pieces and add: $\Phi_B=\displaystyle\int\mathbf B\cdot d\mathbf A$. Flux is a scalar (it can be positive, negative or zero). Its SI unit is the weber: $1\ \text{Wb}=1\ \text{T m}^2$; dimensions $[\text{ML}^2\text{T}^{-2}\text{A}^{-1}]$. For a coil of $N$ identical turns the total flux linkage is $N\Phi_B$.

The formula shows the three ways to change the flux through a loop: change the field $B$ (move a magnet, change a current), change the area $A$ (slide a rod along rails, squeeze the loop), or change the angle $\theta$ (rotate the coil — the principle of the generator, taken up in Section 14.3). Flux is greatest, $BA$, when the field is perpendicular to the plane of the loop ($\theta=0^\circ$), and zero when the field lies in the plane ($\theta=90^\circ$).

📘 Definition 14.2 — Electromagnetic induction

Electromagnetic induction is the production of an emf in a circuit whenever the magnetic flux linked with it changes. The emf is called the induced emf; if the circuit is closed it drives an induced current $I=\varepsilon/R$, where $R$ is the total resistance of the circuit. The emf exists even if the circuit is open — then it simply appears as a potential difference across the gap.

An induced emf is not produced by charges at rest, so it is not an electrostatic effect. A changing magnetic field produces an induced electric field whose lines close on themselves; it pushes charges round the loop, and the work it does on unit charge in one trip round is the emf. (An electrostatic field could never do that: its work round a closed path is zero.)

✏️ Example 1 — Flux through a tilted coil
A circular coil of radius $5.0\ \text{cm}$ has $100$ turns. It is placed in a uniform magnetic field of $0.40\ \text{T}$ that makes an angle of $60^\circ$ with the plane of the coil. (a) Find the magnetic flux through one turn and the flux linkage of the coil. (b) Find the flux through one turn when the coil is turned so that its plane is perpendicular to the field, and when the field lies in its plane.
Angle The formula needs the angle with the normal. The field is $60^\circ$ from the plane, so $\theta=90^\circ-60^\circ=30^\circ$ from the normal.
(a) $A=\pi(0.050)^2=7.85\times10^{-3}\ \text{m}^2$. $\Phi_B=BA\cos30^\circ=0.40\times7.85\times10^{-3}\times0.866=2.72\times10^{-3}\ \text{Wb}$. Flux linkage $N\Phi_B=100\times2.72\times10^{-3}=0.272\ \text{Wb}$.
(b) Plane perpendicular to $\mathbf B$ ($\theta=0^\circ$): $\Phi_B=BA=3.14\times10^{-3}\ \text{Wb}$, the maximum. Field in the plane ($\theta=90^\circ$): $\Phi_B=0$.
Check Using the angle with the plane by mistake would give $BA\cos60^\circ=1.57\times10^{-3}\ \text{Wb}$ — a classic slip. A quick test: as the field tilts towards the plane, the flux must fall towards zero.

A flat loop of area $A$ lies in a uniform field $B$ that makes an angle of $30^\circ$ with the plane of the loop. The flux through the loop is

Faraday's law and the induced current

Faraday found that the size of the induced emf depends not on how large the flux is, but on how fast it changes: push the magnet in quickly and the galvanometer kicks hard; push it slowly and the kick is small; hold it still and there is none. Coils with more turns give proportionally more emf, because each turn contributes the same emf and the turns are in series.

📐 Law 14.1 — Faraday's law of electromagnetic induction

The emf induced in a coil of $N$ turns equals the negative of the rate of change of the flux linked with it:

$$\varepsilon=-N\frac{d\Phi_B}{dt}.$$

If the flux changes by $\Delta\Phi_B$ in a time $\Delta t$, the average induced emf is $\varepsilon_\text{av}=-N\dfrac{\Delta\Phi_B}{\Delta t}$. The law holds whatever causes the change — a changing field, a changing area or a changing orientation. The minus sign gives the direction of the emf (Lenz's law, below); for magnitudes we use $|\varepsilon|=N\left|\dfrac{d\Phi_B}{dt}\right|$.

For a coil whose area and orientation are fixed in a field perpendicular to its plane, $\varepsilon=-NA\,\dfrac{dB}{dt}$. For a loop whose area changes in a fixed perpendicular field, $\varepsilon=-NB\,\dfrac{dA}{dt}$. If both change, use the product rule on $\Phi_B=BA$.

The charge that flows. If the coil is part of a closed circuit of total resistance $R$, the induced current is $I=\dfrac{|\varepsilon|}{R}=\dfrac{N}{R}\left|\dfrac{d\Phi_B}{dt}\right|$. The charge that passes in a short time $dt$ is $dq=I\,dt=\dfrac{N}{R}|d\Phi_B|$. Adding these up while the flux changes steadily in one direction:

📐 Result 14.2 — Induced charge

When the flux linked with a coil of $N$ turns changes by $\Delta\Phi_B$ (always in the same direction), the charge that flows through a circuit of total resistance $R$ is

$$q=\frac{N\,|\Delta\Phi_B|}{R}.$$

It depends only on the total change of flux and the resistance — not on how quickly the change happens. If the flux first falls and then rises, the current reverses: the net charge is still $N|\Phi_\text{final}-\Phi_\text{initial}|/R$, but the total charge that has passed (counting both directions) is $N/R$ times the sum of the separate changes.

This is why a "search coil" connected to a ballistic galvanometer measures magnetic fields: flip the coil over in the field (or pull it out of the field), and the charge that flows tells you $\Delta\Phi_B$, whether you did it quickly or slowly.

🧭 Problem-solving strategy — Faraday's law
  1. Write the flux through one turn, $\Phi_B=BA\cos\theta$, as a function of time (or find its initial and final values). Check which angle you are given.
  2. Differentiate for the instantaneous emf, or divide $\Delta\Phi_B$ by $\Delta t$ for the average emf; multiply by $N$.
  3. Current: $I=\varepsilon/R_\text{total}$ (coil resistance plus anything in series). Charge: $q=N|\Delta\Phi_B|/R$, with no time needed.
  4. Direction: use Lenz's law (next subsection), not the minus sign by itself.
✏️ Example 2 — A field switched up
A coil of $200$ turns, each of area $25\ \text{cm}^2$, has a total resistance of $5.0\ \Omega$ (its ends are joined). A uniform magnetic field perpendicular to the plane of the coil rises steadily from $0.10\ \text{T}$ to $0.50\ \text{T}$ in $0.20\ \text{s}$. (a) Find the induced emf and current. (b) Find the charge that flows. (c) Repeat (a) and (b) if the same change takes only $0.050\ \text{s}$.
(a) $|\varepsilon|=NA\dfrac{\Delta B}{\Delta t}=200\times2.5\times10^{-3}\times\dfrac{0.40}{0.20}=1.0\ \text{V}$; $I=\dfrac{1.0}{5.0}=0.20\ \text{A}$.
(b) $q=I\,\Delta t=0.20\times0.20=0.040\ \text{C}$. Check with Result 14.2: $q=\dfrac{NA\,\Delta B}{R}=\dfrac{200\times2.5\times10^{-3}\times0.40}{5.0}=0.040\ \text{C}$ ✓.
(c) Four times faster: $|\varepsilon|=4.0\ \text{V}$ and $I=0.80\ \text{A}$, but for a quarter of the time, so $q=0.80\times0.050=0.040\ \text{C}$ — the same.
Note Faster change $\Rightarrow$ bigger emf and current, same charge. The energy turned into heat is not the same: $I^2R\,\Delta t$ is $0.20\ \text{J}$ in (a) and $0.80\ \text{J}$ in (c) — doing it quickly costs more work.
✏️ Example 3 — A flux that turns back
The magnetic flux through a single-turn loop of resistance $2.0\ \Omega$ varies with time as $\Phi_B=(4t^3-6t^2)\ \text{mWb}$, with $t$ in seconds. (a) Find the magnitude of the induced emf and current at $t=2.0\ \text{s}$. (b) At what instants is the emf zero? (c) Find the net charge that flows between $t=0$ and $t=2.0\ \text{s}$, and the total charge that passes any point of the loop in that time.
Find the emf at $t=2.0\ \text{s}$ before you open the solution:
(a) $\dfrac{d\Phi_B}{dt}=12t^2-12t\ \text{mWb/s}$; at $t=2.0\ \text{s}$ it is $48-24=24\ \text{mWb/s}$. So $|\varepsilon|=24\ \text{mV}$ and $I=\dfrac{24}{2.0}=12\ \text{mA}$.
(b) $12t(t-1)=0$: at $t=0$ and $t=1.0\ \text{s}$. At $t=1.0\ \text{s}$ the flux has its minimum, $\Phi_B=4-6=-2\ \text{mWb}$; there the current reverses.
(c) $\Phi_B(0)=0$, $\Phi_B(1)=-2\ \text{mWb}$, $\Phi_B(2)=32-24=8\ \text{mWb}$. Net charge $=\dfrac{|8-0|}{2.0}=4.0\ \text{mC}$. But from $0$ to $1\ \text{s}$ the flux falls by $2\ \text{mWb}$ ($1.0\ \text{mC}$ one way), and from $1$ to $2\ \text{s}$ it rises by $10\ \text{mWb}$ ($5.0\ \text{mC}$ the other way): total charge passed $=6.0\ \text{mC}$.
⏱ Shortcut Before using $q=\Delta\Phi/R$, check whether $\Phi_B(t)$ turns back in the interval (set $d\Phi_B/dt=0$). If it does, split the interval at the turning point.

A bar magnet is pushed fully into a coil connected to a resistor, once slowly and once quickly. Compared with the slow push, the quick push gives

Lenz's law and conservation of energy

Faraday's law gives the size of the emf. Its direction was stated in 1834 by Heinrich Lenz in a form that is easy to use and easy to remember.

📐 Law 14.3 — Lenz's law

The direction of an induced current is such that it opposes the change in magnetic flux that produces it. (If the circuit is open, the induced emf has the direction in which such a current would flow.) This is the meaning of the minus sign in $\varepsilon=-N\,d\Phi_B/dt$.

Read the law carefully: the induced current opposes the change, not the field. If the flux through a loop is increasing, the induced current makes its own field opposite to the external field inside the loop. If the flux is decreasing, the induced current makes a field in the same direction, trying to keep the flux up. To turn "field inside the loop" into a direction of current, use the right-hand rule for a loop: curl the fingers of your right hand along the current, and your thumb points along the field inside the loop. Equivalently, a loop whose current looks anticlockwise from one side presents a north face to that side; clockwise means a south face.

Either way, the coil resists the motion: you must do work to push the magnet in and work to pull it out. That work is exactly where the electrical energy comes from.

Why it cannot be the other way. Suppose the induced current helped the change: an approaching north pole would meet a south face and be pulled in faster, which would increase the flux faster, which would increase the current and the pull — a magnet given the slightest nudge would accelerate for ever, producing kinetic energy and electrical energy from nothing. Lenz's law is therefore required by the law of conservation of energy: the mechanical work done against the opposing magnetic force equals the electrical energy generated, which ends up as heat $I^2R$ in the circuit. We will check this balance exactly for the sliding rod in the next subsection.

✏️ Example 4 — Which way does the current go?
(a) A long straight wire in the plane of the page carries an upward current that is increasing. A rectangular metal loop lies in the page to the right of the wire. Find the direction of the induced current in the loop and the direction of the net force on it. (b) A copper ring is held horizontal and a bar magnet is dropped through it, north pole first. Describe the induced current (seen from above) while the magnet approaches the ring and after it has passed through, and compare the magnet's acceleration with $g$ in both stages.
(a) Field By the right-hand grip rule, the field of an upward current points into the page on its right-hand side. The current grows, so the flux into the page through the loop increases.
(a) Current The loop opposes the increase by making a field out of the page inside itself: its current is anticlockwise. So the side nearer the wire carries current downward — antiparallel to the wire's current, which repels it — while the far side carries current upward and is attracted, more weakly because it is farther away. Net force: the loop is pushed away from the wire, into weaker field — again opposing the increase of flux.
(b) Approaching The downward flux through the ring increases (field lines leave the north pole). The ring opposes it with an upward field inside: its top face becomes a north pole, current anticlockwise seen from above. It repels the falling magnet, so $a\lt g$.
(b) Leaving Now the south pole moves away below the ring; the downward flux through the ring decreases. The ring makes a downward field to keep it up: current clockwise seen from above, bottom face a north pole, which attracts the magnet's departing south pole upward. Again $a\lt g$. (Just as the magnet's middle passes the ring, the flux is momentarily at its maximum, $d\Phi_B/dt=0$, there is no current and $a=g$.)
⏱ Shortcut "The circuit hates change": an approaching magnet is repelled, a receding one attracted; a loop is pushed out of a growing field and pulled into a weakening one.

In Interactive 1 set $N=100$ turns, magnet strength $1.0\ \text{mWb}$ and speed $0.50\ \text{m/s}$: the peak emf reads $0.859\ \text{V}$. Predict the peak emf when you raise the speed to $1.00\ \text{m/s}$.

At $1.00\ \text{m/s}$ the readout shows a peak emf of $1.72\ \text{V}$: doubling the speed halves the time for the same change of flux, so $d\Phi_B/dt$ — and the emf — doubles. The flux graph is the same shape squeezed into half the time; the emf pulses are twice as tall and half as wide, so the area under each pulse, $N\Phi_\text{max}=0.100\ \text{Wb}$, is unchanged (the same charge flows, Result 14.2). Watch the "near face" readout: while the magnet approaches, the coil's face towards it has the same pole as the magnet's leading end (repulsion); after it passes, the emf reverses sign and the coil attracts the departing magnet.
Interactive 1 — A Magnet Through a Coil: Flux, EMF and Lenz's Law

A bar magnet moves at constant speed along the axis of a coil, passing right through it. The lower graphs show the flux through one turn and the induced emf $\varepsilon=-N\,d\Phi_B/dt$ against time; the dot marks the present instant. The coil's faces are labelled with the poles its induced current creates. Change the speed, the number of turns, the magnet's strength (the flux it sends through one turn when at the centre) and which pole leads.

0.50 m/s1001.0 mWb
flux per turn—
emf now—
peak emf—
coil's near face—

A bar magnet is dropped, north pole downward, through a horizontal copper ring. While the magnet is below the ring and moving away from it, the magnet's acceleration is

Motional emf

So far the flux changed because the field changed. Now keep the field steady and move a conductor through it. Take a straight rod of length $l$ moving with velocity $\mathbf v$ through a uniform field $\mathbf B$, with $l$, $\mathbf v$ and $\mathbf B$ mutually perpendicular. Each free electron in the rod moves with the rod, so it feels a magnetic force $q\mathbf v\times\mathbf B$ along the rod. Electrons pile up at one end, leaving the other end positive, until the electric field $E$ they create balances the magnetic force: $qE=qvB$. The potential difference between the ends is then $El=Blv$. The rod acts like a cell — its emf comes from the magnetic force on the moving charges.

The same answer comes from Faraday's law. Let the rod slide along two parallel rails a distance $l$ apart, joined at one end, so that it closes a rectangle whose length $x$ grows at the rate $dx/dt=v$. The flux through the rectangle is $\Phi_B=Blx$, so $|\varepsilon|=\dfrac{d\Phi_B}{dt}=Bl\dfrac{dx}{dt}=Blv$.

📐 Result 14.4 — Motional emf

A straight conductor of length $l$ moving with velocity $\mathbf v$ in a uniform magnetic field $\mathbf B$ has an emf between its ends of

$$\varepsilon=Blv\qquad(l,\ \mathbf v,\ \mathbf B\ \text{mutually perpendicular}).$$

In general only the components count: $\varepsilon=(\mathbf v\times\mathbf B)\cdot\mathbf l$. The emf is zero if the rod moves along its own length, or parallel to $\mathbf B$, or if the rod lies along $\mathbf B$. The end towards which $\mathbf v\times\mathbf B$ points is the positive end (positive charges are pushed there). For a curved wire moving with velocity $\mathbf v$, $l$ is replaced by the length of the straight line joining its ends, projected perpendicular to $\mathbf v$ and $\mathbf B$.

The rod on rails — energy balance. Join the rails through a resistor $R$ (rod and rails of negligible resistance). The current is $I=\dfrac{Blv}{R}$, and the field exerts a force on the current-carrying rod of size $F_B=BIl=\dfrac{B^2l^2v}{R}$, directed against the velocity (Lenz's law). To keep the rod moving at constant speed an agent must push with an equal force, delivering power

$$P=F_Bv=\frac{B^2l^2v^2}{R}=\frac{\varepsilon^2}{R}=I^2R,$$

exactly the rate at which heat is produced in the resistor. Mechanical work becomes electrical energy becomes heat — Lenz's law and energy conservation in one line.

📐 Result 14.5 — Rod on smooth rails

A rod of mass $m$ and length $l$ slides on smooth horizontal rails joined through a resistance $R$, in a uniform vertical field $B$. The magnetic braking force is $\dfrac{B^2l^2v}{R}$, proportional to the speed. Writing $\tau=\dfrac{mR}{B^2l^2}$:

  • Pulled by a constant force $F$ from rest: $m\dfrac{dv}{dt}=F-\dfrac{B^2l^2v}{R}$, so $v=v_t\left(1-e^{-t/\tau}\right)$ with terminal speed $v_t=\dfrac{FR}{B^2l^2}$.
  • Given a speed $v_0$ and released: $v=v_0e^{-t/\tau}$; it stops after a distance $x=\dfrac{mv_0R}{B^2l^2}$, and all of its kinetic energy $\tfrac12mv_0^2$ becomes heat.
  • A rod sliding down vertical rails reaches $v_t=\dfrac{mgR}{B^2l^2}$ (put $F=mg$).

(The exponentials follow from separating the variables: $\dfrac{dv}{v_t-v}=\dfrac{dt}{\tau}$ integrates to $\ln\dfrac{v_t}{v_t-v}=\dfrac t\tau$. The stopping distance comes from $m\,v\dfrac{dv}{dx}=-\dfrac{B^2l^2v}{R}$, so $m\,dv=-\dfrac{B^2l^2}{R}dx$: the speed falls linearly with distance.)

A rotating rod. A rod of length $l$ rotates with angular velocity $\omega$ about one end, in a plane perpendicular to a uniform field $B$. Different parts of the rod move at different speeds: a small piece $dr$ at distance $r$ from the axis moves at $v=\omega r$ and contributes $d\varepsilon=B(\omega r)\,dr$. Adding up from $0$ to $l$:

📐 Result 14.6 — Rotating rod and rotating disc

The emf between the ends of a rod of length $l$ rotating about one end with angular speed $\omega$, in a plane perpendicular to a uniform field $B$, is

$$\varepsilon=\int_0^lB\omega r\,dr=\tfrac12B\omega l^2.$$

It is the emf of a rod moving with its average speed $\tfrac12\omega l$. A metal disc of radius $R$ rotating about its axis parallel to $B$ (Faraday's disc) has emf $\tfrac12B\omega R^2$ between centre and rim — it behaves like many such rods in parallel. Between two points at distances $r_1$ and $r_2$ from the axis on the same rod, $\varepsilon=\tfrac12B\omega(r_2^2-r_1^2)$.

✏️ Example 5 — Pulled along the rails
A rod of mass $0.10\ \text{kg}$ and length $0.40\ \text{m}$ lies across smooth horizontal rails joined by a $2.0\ \Omega$ resistor, in a uniform vertical field of $0.50\ \text{T}$. The rod and rails have negligible resistance. Starting from rest, the rod is pulled along the rails by a constant horizontal force of $0.20\ \text{N}$. (a) Find its terminal speed. (b) At the terminal speed find the emf, the current and the power delivered by the force, and check it against the heating of the resistor. (c) At what speed is the acceleration half its initial value? (d) Find the speed after $5.0\ \text{s}$.
Find the terminal speed in (a) before you open the solution:
(a) $F=\dfrac{B^2l^2v_t}{R}$: $v_t=\dfrac{FR}{B^2l^2}=\dfrac{0.20\times2.0}{0.25\times0.16}=\dfrac{0.40}{0.040}=10\ \text{m/s}$.
(b) $\varepsilon=Blv_t=0.50\times0.40\times10=2.0\ \text{V}$; $I=\dfrac{2.0}{2.0}=1.0\ \text{A}$ (also $I=\dfrac{F}{Bl}=\dfrac{0.20}{0.20}$ ✓). $P=Fv_t=2.0\ \text{W}$ and $I^2R=1.0\times2.0=2.0\ \text{W}$ ✓.
(c) $a=\dfrac{1}{m}\left(F-\dfrac{B^2l^2v}{R}\right)$ falls linearly with $v$, from $F/m=2.0\ \text{m/s}^2$ at rest to $0$ at $v_t$. It is half when $v=\tfrac12v_t=5.0\ \text{m/s}$.
(d) $\tau=\dfrac{mR}{B^2l^2}=\dfrac{0.10\times2.0}{0.040}=5.0\ \text{s}$, so $v=10\left(1-e^{-1}\right)=6.3\ \text{m/s}$.
⏱ Shortcut $v_t\propto\dfrac{1}{B^2l^2}$: double the field and the terminal speed drops to a quarter, while the terminal current $F/(Bl)$ only halves.
✏️ Example 6 — A spinning rod and Faraday's disc
(a) A copper rod $1.0\ \text{m}$ long rotates about one end at $5.0$ revolutions per second in a plane perpendicular to a uniform field of $0.20\ \text{T}$. Find the emf between its ends. (b) Find the emf between the midpoint of the rod and its free end. (c) If the same rod instead rotates about its midpoint, what is the emf between its two ends? (d) A copper disc of radius $10\ \text{cm}$ spins at $1200\ \text{rpm}$ about its axis, which is parallel to a field of $0.50\ \text{T}$. Find the emf between the axle and the rim.
Find the emf in (b) before you open the solution:
(a) $\omega=2\pi\times5.0=31.4\ \text{rad/s}$; $\varepsilon=\tfrac12B\omega l^2=\tfrac12\times0.20\times31.4\times1.0^2=3.14\ \text{V}$.
(b) $\varepsilon=\tfrac12B\omega\left(l^2-\tfrac{l^2}{4}\right)=\tfrac34\times3.14=2.36\ \text{V}$ — most of the emf comes from the fast-moving outer half.
(c) Each half produces $\tfrac12B\omega(0.50)^2$ from the centre outwards, and both ends are at the same potential relative to the centre: the emf between the ends is zero (each end differs from the midpoint by $0.785\ \text{V}$).
(d) $\omega=\dfrac{1200\times2\pi}{60}=126\ \text{rad/s}$; $\varepsilon=\tfrac12\times0.50\times126\times(0.10)^2=0.314\ \text{V}$.
Check Units: $\text{T}\times\text{s}^{-1}\times\text{m}^2=\text{Wb/s}=\text{V}$ ✓. Remember the $\tfrac12$: using $B\omega l^2$ doubles the answer.

In Interactive 2 choose "pulled by a constant force" with $B=0.50\ \text{T}$, $R=2.0\ \Omega$, $F=0.20\ \text{N}$: the rod settles at $10.0\ \text{m/s}$ with $1.00\ \text{A}$. Predict the terminal speed when you raise $B$ to $1.00\ \text{T}$.

With $B=1.00\ \text{T}$ the rod settles at $2.50\ \text{m/s}$ and the current readout is $0.500\ \text{A}$. The braking force $B^2l^2v/R$ grows as $B^2$, so the same pull is balanced at a quarter of the speed: $v_t=FR/(B^2l^2)$. The current at terminal speed, $F/(Bl)$, only halves. Notice also that the rod now reaches terminal speed four times sooner ($\tau=mR/B^2l^2$ falls from $5.0\ \text{s}$ to $1.25\ \text{s}$). Then switch to "pushed and released" to see the speed die away exponentially.
Interactive 2 — A Rod on Rails: Motional EMF and Magnetic Braking

A rod ($m=0.10\ \text{kg}$, $l=0.40\ \text{m}$) slides on smooth rails joined by a resistor $R$, in a field $B$ into the screen. Either pull it from rest with a constant force $F$, or push it to $8.0\ \text{m/s}$ and let go. Press Play: the induced current (green) flows round the circuit and the field pushes back on the rod (red arrow). The graph shows speed against time (time-lapse: each run shows four time constants).

0.50 T2.0 Ω0.20 N
speed $v$—
emf $Blv$—
current—
braking force—
✏️ Example 7 — NEET-style: average emf and a falling magnet, by elimination
(a) A coil of $50$ turns, each of area $0.020\ \text{m}^2$, lies with its plane perpendicular to a uniform field of $0.30\ \text{T}$. It is pulled completely out of the field in $0.15\ \text{s}$. The average emf induced in it is (A) $0.040\ \text{V}$ (B) $2.0\ \text{V}$ (C) $0.30\ \text{V}$ (D) $4.0\ \text{V}$.
(b) The same bar magnet is dropped, north pole down, along the axis of two horizontal copper rings: ring 1 is a closed ring, ring 2 has a narrow cut in it. While the magnet is approaching each ring its accelerations are $a_1$ and $a_2$. Then (A) $a_1=a_2=g$ (B) $a_1\lt g$, $a_2=g$ (C) $a_1\gt g$, $a_2=g$ (D) $a_1\lt g$, $a_2\lt g$.
(a) Change The flux through one turn falls from $BA=0.30\times0.020=6.0\times10^{-3}\ \text{Wb}$ to zero, so the flux linkage changes by $N|\Delta\Phi_B|=50\times6.0\times10^{-3}=0.30\ \text{Wb}$.
(a) Faraday $\varepsilon_\text{av}=\dfrac{N|\Delta\Phi_B|}{\Delta t}=\dfrac{0.30}{0.15}=2.0\ \text{V}$ (Law 14.1).
Answer (a) (B) $2.0\ \text{V}$. (A) forgets the $50$ turns; (C) is the change of flux linkage in webers, not an emf; (D) doubles the answer.
(b) Lenz In the closed ring the approaching north pole induces a current whose own north face points up at the magnet: the ring repels it, so $a_1\lt g$ (Law 14.3). In the cut ring an emf is still induced, but no current can flow round it, so there is no magnetic force and the magnet falls freely: $a_2=g$.
Answer (b) (B). (C) would mean the ring speeds the magnet up — energy from nothing; (A) ignores the closed ring's current; (D) gives a force without a current.
⏱ Shortcut (a) Any emf option must carry $N$: compute $NBA/\Delta t$ in one line. (b) "Induced current always opposes, never helps" removes every option with $a\gt g$; "no current, no force" fixes $a_2=g$.
⚠️ NEET traps

1. Angle with the plane or with the normal? $\Phi_B=BA\cos\theta$ uses the angle between $\mathbf B$ and the normal. "Field at $30^\circ$ to the plane" means $\theta=60^\circ$. A coil whose plane is parallel to the field has zero flux through it.

2. Flux, flux linkage and the factor $N$. $\Phi_B$ is the flux through one turn; the coil's flux linkage is $N\Phi_B$, and both the emf and the induced charge carry the $N$. An option that is exactly $N$ times too small is the classic trap. Units: $1\ \text{Wb}=1\ \text{T m}^2=1\ \text{V s}$ (not V/s).

3. Rate versus change. The emf depends on how fast the flux changes, $N\,|\Delta\Phi_B|/\Delta t$; the charge depends only on the change, $q=N|\Delta\Phi_B|/R$. Doing the same change twice as fast doubles the emf and the current, but the charge is unchanged. And "flux zero at this instant" does not mean "emf zero" — what matters is the slope of the $\Phi$–$t$ graph.

4. Lenz's law opposes the change, not the field. A decreasing flux produces a current whose field is in the same direction as the external field. A magnet falling through a closed ring has $a\lt g$ both while it approaches (repelled) and while it leaves (attracted back). A ring with a cut in it still has an emf, but no current flows, so it exerts no force: the magnet falls with $a=g$.

5. Motional emf needs perpendicular components. $\varepsilon=Blv$ only when $l$, $v$ and $B$ are mutually perpendicular; a rod moving along its length or along $B$ has no emf. For a rotating rod use $\tfrac12B\omega l^2$ (not $B\omega l^2$), with $\omega$ in rad/s — convert revolutions per second with $\omega=2\pi\nu$. A rod spinning about its midpoint has zero emf between its ends.

6. Magnetic braking grows with speed. The force on a rod on rails is $B^2l^2v/R$, so a constant pull gives a terminal speed $FR/B^2l^2$, not a constant acceleration. At constant speed the mechanical power $Fv$ equals the electrical power $\varepsilon^2/R$ — a quick check on any option.

A metal rod of length $l$ rotates about its midpoint with angular speed $\omega$ in a plane perpendicular to a uniform field $B$. The emf between its two ends is

Exercises

Unless told otherwise, fields are uniform, rails are smooth and the resistance of rods and rails is negligible. Take $g=9.8\ \text{m/s}^2$.

I
Magnetic flux and Faraday's law.
  • 1 A rectangular loop $20\ \text{cm}\times10\ \text{cm}$ is in a field of $0.50\ \text{T}$ whose direction makes $30^\circ$ with the normal to the loop. Find the flux through it.
  • 2 Through what angle (between $\mathbf B$ and the normal) must a loop be turned from the position of maximum flux for the flux to fall to half its maximum?
  • 3 A coil of $500$ turns and area $4.0\ \text{cm}^2$ lies perpendicular to a field that falls steadily from $0.80\ \text{T}$ to zero in $0.10\ \text{s}$. Find the induced emf.
  • 4 The coil of part 3 has a total resistance of $8.0\ \Omega$. Find the induced current and the charge that flows.
  • 5 The flux through each turn of a $20$-turn coil is $\Phi_B=(5t^2+3t+2)\ \text{mWb}$ ($t$ in s). Find the induced emf at $t=3.0\ \text{s}$.
  • 6 A $100$-turn coil of area $50\ \text{cm}^2$ lies perpendicular to a field $B=B_0\sin\omega t$ with $B_0=0.020\ \text{T}$ and $\omega=100\pi\ \text{rad/s}$. Find the largest emf induced.
  • 7 A flexible circular loop in a perpendicular field of $0.50\ \text{T}$ is shrinking: at the instant its radius is $10\ \text{cm}$, the radius decreases at $2.0\ \text{mm/s}$. Find the emf, in mV.
  • 8 A search coil of $50$ turns and area $20\ \text{cm}^2$ lies perpendicular to a field of $0.30\ \text{T}$. It is flipped over through $180^\circ$; the total resistance of the circuit is $3.0\ \Omega$. Find the charge that flows.
1 $\Phi_B=BA\cos30^\circ=0.50\times0.020\times0.866=8.66\times10^{-3}\ \text{Wb}$.
2 $\cos\theta=\tfrac12$: $\theta=60^\circ$.
3 $|\varepsilon|=NA\dfrac{\Delta B}{\Delta t}=500\times4.0\times10^{-4}\times\dfrac{0.80}{0.10}=1.6\ \text{V}$.
4 $I=\dfrac{1.6}{8.0}=0.20\ \text{A}$; $q=I\Delta t=0.020\ \text{C}$ (or $NA\Delta B/R=0.16/8.0$ ✓).
5 $\dfrac{d\Phi_B}{dt}=10t+3=33\ \text{mWb/s}$ at $t=3.0\ \text{s}$; $|\varepsilon|=20\times0.033=0.66\ \text{V}$.
6 $\varepsilon=-NA\dfrac{dB}{dt}=-NAB_0\omega\cos\omega t$; largest value $NAB_0\omega=100\times5.0\times10^{-3}\times0.020\times314=3.14\ \text{V}$.
7 $\Phi_B=B\pi r^2$, so $|\varepsilon|=B\cdot2\pi r\left|\dfrac{dr}{dt}\right|=0.50\times2\pi\times0.10\times2.0\times10^{-3}=6.28\times10^{-4}\ \text{V}=0.628\ \text{mV}$.
8 $\Delta\Phi_B=2BA$ per turn: $q=\dfrac{N\cdot2BA}{R}=\dfrac{50\times2\times0.30\times2.0\times10^{-3}}{3.0}=0.020\ \text{C}$.
II
Lenz's law and energy.
  • 1 The north pole of a magnet is moved away from the face of a coil. What pole appears on that face, and which way does the current circulate as seen from the magnet?
  • 2 Two coaxial loops A and B face each other. A switch is closed so that a current starts in A, anticlockwise as seen from B. Say whether the current induced in B circulates in the same sense as A's current or the opposite sense (both seen from the same side) while A's current grows, once it is steady, and when the switch is opened.
  • 3 A square loop is being pulled to the right out of a region where the field points into the page. Find the direction of the induced current and of the magnetic force on the loop.
  • 4 A rectangular loop moves away from a long straight wire that carries a steady current, staying in the same plane. Is the loop attracted or repelled by the wire while it moves? Explain with Lenz's law.
  • 5 A magnet falls through a copper ring. At the instant the middle of the magnet is at the ring, what is the induced current, and what is the magnet's acceleration?
  • 6 A square loop of side $10\ \text{cm}$ and resistance $0.50\ \Omega$ is pulled out of a field of $0.40\ \text{T}$ (perpendicular to the loop) at a steady $2.0\ \text{m/s}$, with one side still inside the field. Find the force needed and the power delivered by it.
  • 7 Show that if induced currents aided the change of flux, a magnet near a coil could gain kinetic energy without limit. What law would this break?
  • 8 For the loop of part 6, find the work done in pulling it completely out of the field, and say where that energy goes.
1 The flux decreases, so the coil tries to hold the magnet back: the near face becomes a south pole (attracting the north pole), and the current is clockwise as seen from the magnet.
2 While A's current grows, the flux through B increases, so B's current is opposite to A's (clockwise as seen from the same side), and the loops repel. Steady current: no change of flux, no current in B. On opening the switch, the flux falls and B's current is in the same sense as A's was; the loops attract.
3 The flux into the page decreases, so the induced current makes a field into the page inside the loop: clockwise. The only side in the field carries a current on which the force is to the left — opposing the pull.
4 Moving away, the loop is in weaker and weaker field: its flux decreases. It opposes this by being attracted back towards the wire (its nearer side carries current parallel to the wire's current).
5 There the flux through the ring is at its maximum, so $d\Phi_B/dt=0$: no current at that instant and the acceleration is exactly $g$.
6 $\varepsilon=Blv=0.40\times0.10\times2.0=0.080\ \text{V}$; $I=\dfrac{0.080}{0.50}=0.16\ \text{A}$; $F=BIl=0.40\times0.16\times0.10=6.4\times10^{-3}\ \text{N}$. $P=Fv=12.8\ \text{mW}$ $(=I^2R=0.0256\times0.50$ ✓$)$.
7 An approaching pole would meet an opposite pole and be pulled in faster, increasing $d\Phi_B/dt$, the current and the pull without limit: kinetic and electrical energy would appear from nothing, violating the conservation of energy.
8 $W=Fx=6.4\times10^{-3}\times0.10=6.4\times10^{-4}\ \text{J}$ (the loop moves one side-length, $0.10\ \text{m}$). It all becomes heat in the loop: $I^2Rt=0.0128\times0.050\ \text{s}=6.4\times10^{-4}\ \text{J}$ ✓.
III
Motional emf.
  • 1 A rod $0.50\ \text{m}$ long moves at $4.0\ \text{m/s}$ perpendicular to itself and to a field of $0.25\ \text{T}$. Find the emf.
  • 2 The axle of a truck, $1.5\ \text{m}$ long, moves horizontally at $30\ \text{m/s}$ where the vertical component of the Earth's field is $4.0\times10^{-5}\ \text{T}$. Find the emf between the ends of the axle, in mV.
  • 3 A rod $0.50\ \text{m}$ long lies in a plane perpendicular to a $0.40\ \text{T}$ field and moves in that plane at $5.0\ \text{m/s}$ in a direction making $60^\circ$ with its own length. Find the emf.
  • 4 An aircraft with a wing span of $40\ \text{m}$ flies horizontally at $250\ \text{m/s}$ where the vertical component of the Earth's field is $3.0\times10^{-5}\ \text{T}$. Find the emf between the wing tips. Could a voltmeter on board measure it?
  • 5 A rod $20\ \text{cm}$ long rotates about one end at $50\ \text{rad/s}$ in a plane perpendicular to a $0.40\ \text{T}$ field. Find the emf between its ends.
  • 6 A bicycle wheel with $10$ metal spokes, each $0.50\ \text{m}$ long, turns at $2.0\ \text{rev/s}$ with its axle parallel to a field of $4.0\times10^{-4}\ \text{T}$. Find the emf between the axle and the rim, in mV. Does it depend on the number of spokes?
  • 7 A rod $0.30\ \text{m}$ long slides at a steady $2.0\ \text{m/s}$ on rails joined by a $1.5\ \Omega$ resistor, in a perpendicular field of $0.50\ \text{T}$. Find the current and the force needed to keep the speed constant.
  • 8 For part 7, find the mechanical power supplied and show that it equals the rate of heating of the resistor.
1 $\varepsilon=Blv=0.25\times0.50\times4.0=0.50\ \text{V}$.
2 $\varepsilon=B_Vlv=4.0\times10^{-5}\times1.5\times30=1.8\times10^{-3}\ \text{V}=1.8\ \text{mV}$.
3 The component of $\mathbf v$ along the rod gives nothing: $\varepsilon=Bl\,v\sin60^\circ=0.40\times0.50\times5.0\times0.866=0.866\ \text{V}$.
4 $\varepsilon=3.0\times10^{-5}\times40\times250=0.30\ \text{V}$. A voltmeter on board cannot detect it: its leads move with the wing and carry the same motional emf, which cancels.
5 $\varepsilon=\tfrac12B\omega l^2=\tfrac12\times0.40\times50\times0.040=0.40\ \text{V}$.
6 $\omega=4\pi\ \text{rad/s}$; $\varepsilon=\tfrac12\times4.0\times10^{-4}\times4\pi\times0.25=6.28\times10^{-4}\ \text{V}=0.628\ \text{mV}$. The spokes are identical emfs in parallel, so the number of spokes does not matter.
7 $\varepsilon=0.50\times0.30\times2.0=0.30\ \text{V}$; $I=\dfrac{0.30}{1.5}=0.20\ \text{A}$; $F=BIl=0.50\times0.20\times0.30=0.030\ \text{N}$.
8 $P=Fv=0.030\times2.0=0.060\ \text{W}$; $I^2R=0.040\times1.5=0.060\ \text{W}$ ✓.
IV
Harder problems.
  • 1 A rod of mass $20\ \text{g}$ and length $0.50\ \text{m}$ slides without friction down a pair of vertical rails joined at the top by a $0.80\ \Omega$ resistor, in a horizontal field of $0.40\ \text{T}$ perpendicular to the rails' plane. Find its terminal speed.
  • 2 A rod of mass $0.050\ \text{kg}$ and length $0.25\ \text{m}$ on horizontal rails joined by a $0.50\ \Omega$ resistor, in a vertical field of $0.80\ \text{T}$, is given a speed of $6.0\ \text{m/s}$ and released. How far does it slide before stopping? How much heat is produced?
  • 3 For part 2, find the total charge that flows through the resistor.
  • 4 A square loop of side $20\ \text{cm}$ and resistance $0.40\ \Omega$ moves at a steady $1.0\ \text{m/s}$ through a region $50\ \text{cm}$ wide containing a field of $0.50\ \text{T}$ perpendicular to the loop. Describe the emf as a function of time and find the total heat produced while the loop crosses the region.
  • 5 A rod slides on rails $0.20\ \text{m}$ apart, forming a rectangle with the closed end. At one instant the rod is $0.50\ \text{m}$ from the closed end and moving away at $2.0\ \text{m/s}$, while the perpendicular field is $0.10\ \text{T}$ and increasing at $0.40\ \text{T/s}$. Find the emf at that instant.
  • 6 A wire bent into a semicircle of radius $10\ \text{cm}$ moves at $3.0\ \text{m/s}$ in its own plane, perpendicular to the diameter joining its ends, in a perpendicular field of $0.50\ \text{T}$. Find the emf between its ends.
  • 7 Each blade of a helicopter rotor is $5.0\ \text{m}$ long and turns at $6.0\ \text{rev/s}$ in a horizontal plane where the vertical component of the Earth's field is $4.0\times10^{-5}\ \text{T}$. Find the emf between the hub and a blade tip, in mV.
1 $v_t=\dfrac{mgR}{B^2l^2}=\dfrac{0.020\times9.8\times0.80}{0.16\times0.25}=\dfrac{0.157}{0.040}=3.92\ \text{m/s}$.
2 $x=\dfrac{mv_0R}{B^2l^2}=\dfrac{0.050\times6.0\times0.50}{0.64\times0.0625}=\dfrac{0.15}{0.040}=3.75\ \text{m}$. Heat $=\tfrac12mv_0^2=0.90\ \text{J}$.
3 $q=\dfrac{\Delta\Phi_B}{R}=\dfrac{Blx}{R}=\dfrac{0.80\times0.25\times3.75}{0.50}=1.5\ \text{C}$. Check by impulse: $Bl\,q=mv_0$ gives $q=\dfrac{0.30}{0.20}=1.5\ \text{C}$ ✓.
4 Entering (first $0.20\ \text{s}$): $\varepsilon=Blv=0.10\ \text{V}$. Wholly inside (next $0.30\ \text{s}$): flux constant, $\varepsilon=0$. Leaving ($0.20\ \text{s}$): $0.10\ \text{V}$ in the opposite sense. Heat $=2\times\dfrac{(0.10)^2}{0.40}\times0.20=0.010\ \text{J}$.
5 $\Phi_B=Blx$: $\varepsilon=l\left(x\dfrac{dB}{dt}+B\dfrac{dx}{dt}\right)=0.20\,(0.50\times0.40+0.10\times2.0)=0.080\ \text{V}$ — half from the changing field, half from the motion (both increase the flux, so they add).
6 The effective length is the straight line joining the ends, the diameter $0.20\ \text{m}$: $\varepsilon=Bdv=0.50\times0.20\times3.0=0.30\ \text{V}$.
7 $\varepsilon=\tfrac12B\omega l^2=\tfrac12\times4.0\times10^{-5}\times(12\pi)\times25=1.88\times10^{-2}\ \text{V}=18.8\ \text{mV}$.
🎯 Exam corner NEET · MCQ

E1. NEET · MCQ A metal rod of length $0.50\ \text{m}$ rotates about one of its ends with an angular speed of $40\ \text{rad/s}$, in a plane perpendicular to a uniform magnetic field of $0.20\ \text{T}$. The emf induced between the ends of the rod is (A) $0.25\ \text{V}$ (B) $2.0\ \text{V}$ (C) $1.0\ \text{V}$ (D) $4.0\ \text{V}$

Formula For a rod rotating about one end, $\varepsilon=\tfrac12B\omega l^2$ (Result 14.6) — the emf of a rod moving with its average speed $\tfrac12\omega l$.
Numbers $\varepsilon=\tfrac12\times0.20\times40\times0.50^2=1.0\ \text{V}$.
Answer (C) $1.0\ \text{V}$.
⏱ Shortcut (B) is $B\omega l^2$ with the $\tfrac12$ forgotten; (D) is $B\omega l$, whose unit is V/m, not V; (A) is $\tfrac18B\omega l^2$, the emf between the midpoint and an end of a rod pivoted at its centre.

E2. NEET · MCQ Statement I: An emf is induced in a conducting loop by a changing magnetic flux only if the loop is a closed circuit. Statement II: The total charge that flows through a closed coil when the flux linked with it changes by a given amount (always in the same direction) does not depend on the time taken for the change. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement I The emf appears whenever the flux changes, open circuit or not; an open loop simply shows it as a potential difference across the gap (Definition 14.2). Only the current needs a closed circuit. Incorrect.
Statement II $q=N|\Delta\Phi_B|/R$ (Result 14.2): a faster change gives a larger current for a shorter time, and the time cancels. Correct.
Answer (D).
⏱ Shortcut "Emf needs a change of flux; current needs a closed path." Statement I mixes the two.

E3. NEET · MCQ Assertion (A): A bar magnet dropped along the axis of a horizontal closed copper ring falls with an acceleration less than $g$, both while it approaches the ring and while it moves away below it. Reason (R): The current induced in the ring always opposes the relative motion of the magnet and the ring. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Reason By Lenz's law (Law 14.3) the induced current opposes the change that causes it; for a moving magnet that change is the relative motion, so the force on the magnet always opposes its motion. True.
Assertion Approaching, the ring repels the magnet (upward force); receding, the ring attracts it back (again upward). In both stages the net downward force is less than $mg$. True — and it is true because of R.
Answer (A).
⏱ Shortcut If the ring could ever make $a\gt g$, the magnet would gain kinetic energy and the ring would also be heated — energy from nothing. So "less than $g$ throughout" must hold, and the reason is Lenz's law itself.

E4. NEET · MCQ Match each arrangement in List-I with the emf in List-II. The field $B$ is uniform in every case.
List-I: (a) a rod of length $l$ moving with speed $v$ perpendicular to itself and to $\mathbf B$ (b) a rod of length $l$ rotating about one end with angular speed $\omega$ in a plane perpendicular to $\mathbf B$ (c) the same rod rotating about its midpoint (emf between its ends) (d) a metal disc of radius $r$ rotating with angular speed $\omega$ about its axis, which is parallel to $\mathbf B$ (emf between centre and rim)
List-II: (i) $\tfrac12B\omega l^2$ (ii) zero (iii) $Blv$ (iv) $\tfrac12B\omega r^2$
Choose the correct answer: (A) a-iii, b-iv, c-ii, d-i (B) a-iii, b-i, c-ii, d-iv (C) a-i, b-iii, c-iv, d-ii (D) a-iii, b-i, c-iv, d-ii

Match (a) Motional emf, $Blv$ (Result 14.4) — iii. (b) $\tfrac12B\omega l^2$ (Result 14.6) — i. (c) Each half gives $\tfrac18B\omega l^2$ from the centre outwards, so the two ends are at the same potential — ii. (d) Faraday's disc behaves like many rods of length $r$ in parallel, $\tfrac12B\omega r^2$ — iv.
Answer (B) a-iii, b-i, c-ii, d-iv.
⏱ Shortcut Only (a) can be $Blv$ — that removes (C). The rod about its midpoint is the only "zero" — that removes (D). Between (A) and (B), the disc's emf must contain its own radius $r$: d-iv, so (B).

E5. NEET · MCQ The graph shows how the magnetic flux through a single-turn loop of resistance $2.0\ \Omega$ varies with time. In which part of the graph is the induced current largest in magnitude, and what is that current? (A) OA, $1.5\ \text{mA}$ (B) AB, $3.0\ \text{mA}$ (C) BC, $1.5\ \text{mA}$ (D) BC, $3.0\ \text{mA}$
t (s)Φ (mWb)06123456OABC

Slopes The emf is the slope of the $\Phi$–$t$ graph (Law 14.1). OA: $\dfrac{6\ \text{mWb}}{2\ \text{s}}=3\ \text{mV}$. AB: the flux is constant, so the emf is zero — even though the flux is largest there. BC: $\dfrac{6\ \text{mWb}}{1\ \text{s}}=6\ \text{mV}$.
Current In BC, $I=\dfrac{\varepsilon}{R}=\dfrac{6\ \text{mV}}{2.0\ \Omega}=3.0\ \text{mA}$ (in OA it is $1.5\ \text{mA}$, in the opposite sense).
Answer (D) BC, $3.0\ \text{mA}$.
⏱ Shortcut Steepest segment = largest emf: BC falls by the same $6\ \text{mWb}$ as OA rose, in half the time. (B) is the trap "largest flux means largest emf"; (C) has the right segment with OA's current.

E6. NEET · MCQ How many of the following statements are correct?
(i) Magnetic flux is a scalar quantity.
(ii) $1\ \text{weber}=1\ \text{volt second}$.
(iii) Lenz's law is a consequence of the conservation of charge.
(iv) A straight rod moving along its own length in a uniform magnetic field perpendicular to the rod has no emf between its ends.
(v) At an instant when the flux through a coil is zero, the emf induced in it must also be zero.
(A) Two (B) Three (C) Four (D) Five

Check each (i) ✓ — $\Phi_B=\mathbf B\cdot\mathbf A$ is a dot product (Definition 14.1). (ii) ✓ — $\varepsilon=d\Phi_B/dt$, so $\text{Wb}=\text{V s}$. (iii) ✗ — it follows from conservation of energy. (iv) ✓ — $\mathbf v$ is along the rod, so $(\mathbf v\times\mathbf B)\cdot\mathbf l=0$ (Result 14.4). (v) ✗ — the emf depends on the rate of change; in an AC generator the emf is largest exactly when the flux is zero.
Answer (B) three statements: (i), (ii) and (iv).
⏱ Shortcut Mark ✓ / ✗ as you read. The two false ones are the classic pair: "charge" in place of "energy", and "zero flux means zero emf".
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. When a magnet is dropped through a coil from different heights, how does the peak induced emf depend on its speed — and does the area under each emf pulse stay the same, as Faraday's law predicts?

Why it matters. Linear generators — a magnet sliding through a coil — power shake-to-charge torches, harvest energy from the bobbing of ocean-wave buoys in Portugal, Scotland and Australia, and are being tested in road surfaces and footwear. Seismometers and the pick-ups of electric guitars work the same way in reverse: they turn a motion into an emf. Designing any of them starts from $\varepsilon=-N\,d\Phi_B/dt$.

What to do.

  1. Wind a coil of a few hundred turns of thin enamelled wire on a plastic tube wide enough for a small strong magnet to fall through freely.
  2. Connect the coil to a data logger, an oscilloscope, or a laptop's microphone input through a simple voltage divider (free sound-recording software then shows the emf against time).
  3. Drop the magnet through the coil from heights of $5$, $10$, $20$, $40$ and $80\ \text{cm}$ above it. Record the two emf pulses each time.
  4. For each drop, read the peak emf and estimate the area under each pulse (count squares or sum the samples). Compute the speed at the coil, $v=\sqrt{2gh}$.
  5. Plot the peak emf against $v$, and the pulse area against $v$.

Tools: Plastic tube, enamelled copper wire, a neodymium magnet, metre rule, data logger or oscilloscope (or a laptop with sound software), spreadsheet.

Hand in: Your two graphs with a line of best fit, a short explanation of why the second pulse is larger than the first and of opposite sign, and a comparison of the pulse areas with $N\Phi_\text{max}$.

Going further. Repeat with a copper or aluminium tube around the coil. What happens to the pulses, and why? (The answer leads straight into eddy currents, Section 14.2.)

Instructor note: the peak emf should rise in proportion to $v$, while the pulse areas stay nearly constant (equal to the flux linkage $N\Phi_\text{max}$) — a clean confirmation that the emf depends on the rate of change of flux and the charge on the change itself. The second pulse is larger because the magnet has sped up while passing through the coil. Protect the sound-card input: keep the signal below about $1\ \text{V}$.

🧪 Self-check quiz

0/5 correct

Q1. One weber is equal to

Q2. A circular loop lies in the plane of the page in a uniform magnetic field that points out of the page and is increasing. Seen by a reader looking at the page, the induced current in the loop is

Q3. The charge that flows through a closed coil when the flux through it changes (in one direction) depends on

Q4. A straight conductor $2.0\ \text{m}$ long moves at $5.0\ \text{m/s}$ in a uniform field of $0.10\ \text{T}$; the conductor, its velocity and the field are mutually perpendicular. The emf between its ends is

Q5. A rod of length $l$ rotates with angular speed $\omega$ about one end in a plane perpendicular to a field $B$. If both $l$ and $\omega$ are doubled, the emf between its ends becomes