Chapter 3 · Laws of Motion

3.4 Dynamics of Circular Motion

Moving on a circle needs a net force $mv^2/r$ towards the centre. Friction, tension, the normal force and gravity supply it — on a flat road, on a banked curve, in a conical pendulum and at the top and bottom of a loop.

A Formula 1 car takes a corner at over $250\ \text{km/h}$; a bus on a hill road crawls round a hairpin bend; a velodrome cyclist leans into a track banked at more than $40^\circ$; a child's swing ride whirls its seats outward on long chains. In Section 2.4 you learnt the kinematics: a body moving with speed $v$ on a circle of radius $r$ has an acceleration $v^2/r$ directed towards the centre, even if its speed never changes. Newton's second law now asks the question that kinematics cannot: what force produces that acceleration?

The answer is never a new, mysterious force. It is always one of the familiar ones — friction, tension, the normal force, gravity — or a combination of their components. In this section you will learn to find which force is doing the job and how large it must be, and so answer the classic NEET questions: the fastest safe speed on a level curve, the right banking angle for a highway, the range of speeds a banked road with friction can handle, and the angle of a conical pendulum. Motion in a vertical circle is introduced qualitatively; Chapter 4 completes it with energy.

Centripetal force and its sources

Recall the kinematics. For uniform circular motion of radius $r$, speed $v$ and angular speed $\omega$ (so $v=\omega r$), the acceleration is

$$a_c=\frac{v^2}{r}=\omega^2r,$$

directed towards the centre at every instant. By Newton's second law the net force on the body must point the same way.

📘 Definition 3.12 — Centripetal force

The centripetal force on a body moving on a circle is the component of the net force directed towards the centre. For a body of mass $m$ moving with speed $v$ on a circle of radius $r$ it must have magnitude

$$F_c=\frac{mv^2}{r}=m\omega^2r .$$

"Centripetal" describes a role, not a kind of force: in each problem it is supplied by real forces — tension, friction, the normal force, gravity — or by components of them. It is never drawn as an extra arrow on a free-body diagram.

📐 Result 3.15 — Newton's second law for circular motion

Resolve all forces on the body along the radial direction (towards the centre) and the tangential direction (along the velocity). Then

$$\sum F_\text{radial}=\frac{mv^2}{r},\qquad\sum F_\text{tangential}=m\frac{dv}{dt}.$$

For uniform circular motion the tangential sum is zero; for non-uniform circular motion the net force has both components, and its magnitude is $m\sqrt{(v^2/r)^2+(dv/dt)^2}$. Any force perpendicular to the plane of the circle must balance (if the circle stays in a fixed plane).

Who supplies the centripetal force? A stone whirled on a string: the tension. A car on a flat bend: static friction from the road on the tyres. A train on a curved track: the sideways push of the rails on the wheel flanges. The Moon around the Earth: gravity. A rider on the wall of a spinning "rotor" drum: the normal force of the wall. A plane banking to turn: the horizontal component of the lift on its wings.

What happens when the force fails. If the string breaks, nothing pulls the stone towards the centre any more, so by the first law it moves off along the tangent with the speed it had — not radially outward. Mud flies off a bicycle tyre tangentially for the same reason.

The view from the rotating frame. A passenger in a turning car feels "thrown outward". In the ground frame (an inertial frame) there is no outward force: the passenger's body simply tends to go straight while the car turns under it, and the seat or door pushes them inward. In the frame of the car, which is accelerating, Newton's laws work only if we add a pseudo force $m\omega^2r=mv^2/r$ directed away from the centre — the centrifugal force. Use it only when you deliberately work in the rotating frame; then the body is "at rest" and the real forces plus the centrifugal force add to zero. Never mix the two pictures: either $\sum F=mv^2/r$ inward (ground frame) or $\sum F+F_\text{cf}=0$ (rotating frame).

📘 Definition 3.13 — Centrifugal (pseudo) force

In a frame rotating with angular speed $\omega$, a body at distance $r$ from the axis appears to feel a centrifugal force $m\omega^2r$ directed radially outward. It is a pseudo force — no other body exerts it, and it has no third-law partner — introduced so that Newton's laws can be used in the non-inertial rotating frame.

✏️ Example 1 — How fast before the string snaps?
A $0.25\ \text{kg}$ puck is tied to a light string and moves in a horizontal circle of radius $0.80\ \text{m}$ on a frictionless ice table, the other end of the string being fixed at the centre. The string breaks if its tension exceeds $50\ \text{N}$. (a) Find the greatest speed of the puck and the corresponding number of revolutions per second. (b) Find the tension when the puck makes $2.0$ revolutions per second. (c) In which direction does the puck move just after the string breaks?
Source Weight and the normal force of the ice balance vertically; the only horizontal force is the tension, so $T=\dfrac{mv^2}{r}$.
(a) $v_{\max}=\sqrt{\dfrac{T_{\max}r}{m}}=\sqrt{\dfrac{50\times0.80}{0.25}}=\sqrt{160}=12.6\ \text{m/s}$; revolutions per second $=\dfrac{v}{2\pi r}=\dfrac{12.65}{5.03}=2.5\ \text{rev/s}$.
(b) $\omega=2\pi\times2.0=12.57\ \text{rad/s}$; $T=m\omega^2r=0.25\times158\times0.80=31.6\ \text{N}$.
(c) Along the tangent to the circle at the point of breaking, at $12.6\ \text{m/s}$ — the first law, since no horizontal force acts any more.
Check Tension grows as $\omega^2$: going from $2.0$ to $2.5\ \text{rev/s}$ multiplies it by $1.5625$, and $31.6\times1.5625=49.4\approx50\ \text{N}$ ✓.
✏️ Example 2 — A coin on a turntable
A coin is placed $12\ \text{cm}$ from the centre of a horizontal turntable; $\mu_s=0.30$ between coin and turntable. (a) Find the greatest angular speed (in rad/s and in rpm) at which the coin stays on without slipping. (b) Does it stay on at $33\tfrac13\ \text{rpm}$? At $45\ \text{rpm}$? (c) At $45\ \text{rpm}$, how far from the centre could the coin be placed before it slips? (d) Describe the forces in the turntable's rotating frame.
Source Static friction is the only horizontal force: $f=m\omega^2r\le\mu_smg$, so $\omega^2r\le\mu_sg$ — the mass cancels.
(a) $\omega_{\max}=\sqrt{\dfrac{\mu_sg}{r}}=\sqrt{\dfrac{0.30\times9.8}{0.12}}=\sqrt{24.5}=4.95\ \text{rad/s}$, i.e. $4.95\times\dfrac{60}{2\pi}=47\ \text{rpm}$.
(b) $33\tfrac13\ \text{rpm}=3.49\ \text{rad/s}$ and $45\ \text{rpm}=4.71\ \text{rad/s}$ — both below $4.95\ \text{rad/s}$, so the coin stays on in both cases (only just at $45\ \text{rpm}$: it needs $\omega^2r=2.66\ \text{m/s}^2$ out of the available $\mu_sg=2.94\ \text{m/s}^2$).
(c) $r_{\max}=\dfrac{\mu_sg}{\omega^2}=\dfrac{2.94}{4.712^2}=0.132\ \text{m}=13\ \text{cm}$.
(d) In the rotating frame the coin is at rest: friction $m\omega^2r$ inward balances the centrifugal pseudo force $m\omega^2r$ outward. Same equation, different bookkeeping.

A puck on a string moves in a horizontal circle on smooth ice. The number of revolutions per second is doubled, with the same radius. The tension in the string becomes

A vehicle on a level circular road

On a flat road the forces on a car are its weight $mg$ (down), the normal force $N$ (up) and the friction of the road on the tyres (horizontal). The tyres roll without slipping, so this is static friction, and it points sideways, towards the centre of the curve. Vertically $N=mg$; horizontally $f=mv^2/r$. Since $f\le\mu_sN=\mu_smg$:

📐 Result 3.16 — Maximum speed on a level curve

A vehicle can take a level curve of radius $r$ without skidding provided

$$v\le v_{\max}=\sqrt{\mu_srg},$$

where $\mu_s$ is the coefficient of static friction between tyres and road. $v_{\max}$ does not depend on the mass of the vehicle. Above it, friction cannot supply $mv^2/r$ and the vehicle skids towards the outside of the curve. (Here we treat the vehicle as a particle and ignore toppling.)

Because $v_{\max}\propto\sqrt{\mu_s}$, a wet road that halves $\mu_s$ reduces the safe speed by a factor $\sqrt2$ — about $30\%$, not $50\%$. And because $v_{\max}\propto\sqrt r$, a sharper bend (smaller $r$) must be taken more slowly.

✏️ Example 3 — A bend in the rain
A level road curves with radius $50\ \text{m}$. The coefficient of static friction between tyres and road is $0.60$ when dry and $0.25$ when wet. (a) Find the maximum safe speed in each case, in m/s and km/h. (b) A $1200\ \text{kg}$ car takes the bend at $12\ \text{m/s}$. Find the friction force required. Is the car safe on the dry road? On the wet road?
Find the maximum safe speed on the dry road before you open the solution:
(a) dry $v_{\max}=\sqrt{0.60\times50\times9.8}=\sqrt{294}=17.1\ \text{m/s}=61.7\ \text{km/h}$.
(a) wet $v_{\max}=\sqrt{0.25\times490}=\sqrt{122.5}=11.1\ \text{m/s}=39.8\ \text{km/h}$.
(b) Required friction $f=\dfrac{mv^2}{r}=\dfrac{1200\times144}{50}=3456\ \text{N}\approx3.5\ \text{kN}$. Available: dry $\mu_smg=7.06\ \text{kN}$ (safe); wet $2.94\ \text{kN}$ — less than needed, so on the wet road the car skids outward.
Check Consistent with (a): $12\ \text{m/s}$ is below the dry limit $17.1\ \text{m/s}$ but above the wet limit $11.1\ \text{m/s}$.

A loaded truck and a small car take the same level curve; the coefficient of static friction is the same for both. Compared with the car, the truck's maximum safe speed is

Banked roads

Relying on friction alone is risky — it changes with rain, oil and tyre wear. Engineers therefore bank curves: the outer edge of the road is raised so that the road surface is tilted at an angle $\theta$ towards the centre. Now the normal force, being perpendicular to the tilted road, leans towards the centre, and its horizontal component $N\sin\theta$ can supply the centripetal force on its own.

Without friction. Take axes horizontal (towards the centre) and vertical — not along the slope, because the acceleration is horizontal. With only $mg$ and $N$:

$$N\sin\theta=\frac{mv^2}{r},\qquad N\cos\theta=mg\quad\Longrightarrow\quad\tan\theta=\frac{v^2}{rg}.$$

At this one speed $v_0=\sqrt{rg\tan\theta}$ — the design speed or optimum speed — no friction is needed at all, and $N=mg/\cos\theta$, larger than the weight.

With friction. If the car goes faster than $v_0$, it tends to slide up the bank (outward), so friction acts down the slope. Taking $f$ down the slope:

$$N\sin\theta+f\cos\theta=\frac{mv^2}{r},\qquad N\cos\theta-f\sin\theta=mg .$$

Solving, the friction needed and the normal force are

$$f=m\left(\frac{v^2}{r}\cos\theta-g\sin\theta\right),$$ $$N=m\left(g\cos\theta+\frac{v^2}{r}\sin\theta\right).$$

$f$ is positive (down the slope) for $v\gt v_0$ and negative (up the slope) for $v\lt v_0$. The car holds as long as $|f|\le\mu_sN$. Setting $f=+\mu_sN$ gives the top speed; setting $f=-\mu_sN$ gives the lowest speed below which the car would slide down into the curve.

📐 Result 3.17 — Speeds on a banked curve

For a curve of radius $r$ banked at angle $\theta$, with coefficient of static friction $\mu_s$ (vehicle treated as a particle):

$$v_0=\sqrt{rg\tan\theta}\qquad(\text{no friction needed}),$$ $$v_{\max}=\sqrt{rg\,\frac{\tan\theta+\mu_s}{1-\mu_s\tan\theta}},$$ $$v_{\min}=\sqrt{rg\,\frac{\tan\theta-\mu_s}{1+\mu_s\tan\theta}}\quad(\text{and }v_{\min}=0\text{ if }\mu_s\ge\tan\theta).$$

The vehicle can take the curve at any speed from $v_{\min}$ to $v_{\max}$. With $\mu_s=0$ both reduce to $v_0$; with $\theta=0$, $v_{\max}=\sqrt{\mu_srg}$ (Result 3.16). If $\mu_s\tan\theta\ge1$ there is no upper limit. None of these depends on the mass.

The dividing form $\dfrac{\tan\theta\pm\mu_s}{1\mp\mu_s\tan\theta}$ is $\tan(\theta\pm\lambda)$, where $\lambda$ is the angle of friction of Section 3.3: $v_{\max}=\sqrt{rg\tan(\theta+\lambda)}$ and $v_{\min}=\sqrt{rg\tan(\theta-\lambda)}$. Friction acts like extra banking of $\pm\lambda$. Railway tracks are banked by raising the outer rail by a height $h$ (the superelevation or cant); for rails a distance $d$ apart, $\sin\theta=h/d$, and for small angles $h\approx d\,\dfrac{v^2}{rg}$.

✏️ Example 4 — Designing a banked curve
A highway curve of radius $120\ \text{m}$ is to be banked so that cars travelling at $72\ \text{km/h}$ need no friction. (a) Find the banking angle. (b) Find the normal force on a $1000\ \text{kg}$ car at the design speed. (c) On an icy day a car takes this curve at only $15\ \text{m/s}$. Find the size and direction of the friction force it needs.
(a) $v=72\ \text{km/h}=20\ \text{m/s}$. $\tan\theta=\dfrac{v^2}{rg}=\dfrac{400}{1176}=0.340$, so $\theta=18.8^\circ$.
(b) $N=\dfrac{mg}{\cos\theta}=\dfrac{9800}{0.9467}=1.04\times10^4\ \text{N}$ — about $6\%$ more than the weight.
(c) $f=m\left(\dfrac{v^2}{r}\cos\theta-g\sin\theta\right)=1000(1.875\times0.9467-9.8\times0.3220)=-1.38\times10^3\ \text{N}$. The negative sign means friction must act up the slope, $1.38\ \text{kN}$: below the design speed the car tends to slide down into the curve.
Check At (c), $N=1000(9.8\times0.9467+1.875\times0.3220)=9.88\times10^3\ \text{N}$; the car needs $\mu_s\ge\dfrac{1381}{9882}=0.14$ — ice ($\mu_s\approx0.1$) would let it slide down the bank.
✏️ Example 5 — The window of safe speeds
A curve of radius $80\ \text{m}$ is banked at $15^\circ$, and $\mu_s=0.20$ between tyres and road. Find (a) the speed at which no friction is needed, (b) the maximum safe speed, (c) the minimum safe speed. Give the answers in km/h too.
Find both ends of the safe window yourself first:
Data $rg=784\ \text{m}^2/\text{s}^2$, $\tan15^\circ=0.2679$, $\mu_s\tan\theta=0.0536$.
(a) $v_0=\sqrt{784\times0.2679}=14.5\ \text{m/s}=52\ \text{km/h}$.
(b) $v_{\max}=\sqrt{784\times\dfrac{0.4679}{0.9464}}=\sqrt{387.6}=19.7\ \text{m/s}=71\ \text{km/h}$.
(c) $\tan\theta\gt\mu_s$, so $v_{\min}\ne0$: $v_{\min}=\sqrt{784\times\dfrac{0.0679}{1.0536}}=\sqrt{50.6}=7.1\ \text{m/s}=26\ \text{km/h}$.
Check With $\lambda=\tan^{-1}0.20=11.3^\circ$: $\sqrt{784\tan26.3^\circ}=19.7$ and $\sqrt{784\tan3.7^\circ}=7.1\ \text{m/s}$ ✓. Set these values in Interactive 1 and sweep the speed.

Keep the bank at $15^\circ$ and set the speed to $v=5\ \text{m/s}$. With $\mu_s=0.20$ the car slides down into the curve. What happens if you raise $\mu_s$ to $0.30$?

At $v=5$, $\theta=15^\circ$, $\mu_s=0.20$ the readouts show design speed $14.5\ \text{m/s}$, friction needed $2.23\ \text{N/kg}$ up the bank, safe window $7.11$–$19.7\ \text{m/s}$, state "slides in": the road can give only $\mu_sN=1.91\ \text{N/kg}$. Raise $\mu_s$ to $0.30$: the friction needed is unchanged ($2.23\ \text{N/kg}$ — it depends only on $v$, $r$ and $\theta$), but the limit rises to $2.86\ \text{N/kg}$, so the state becomes "holds" and the window reads $0$–$22\ \text{m/s}$. Because now $\mu_s\gt\tan15^\circ=0.268$, $v_{\min}=0$: the car could even park on the bank.
Interactive 1 — Car on a Banked Curve

A cross-section of a curve of radius $80\ \text{m}$ (centre of the curve to the left). The arrows are the weight (black), the normal force (green) and the static friction the car needs (blue), drawn to scale; the dashed red arrow is the net force $mv^2/r$, horizontal and towards the centre. Press Play to sweep the speed: friction points up the bank below $v_0$, vanishes at $v_0$, points down the bank above it — and the car skids when the needed friction exceeds $\mu_sN$. The bar shows the window of safe speeds.

20 m/s15°0.20
design speed $v_0$—
friction needed—
safe window—
state—

A car takes a banked curve at a speed below its design speed $v_0$ and does not slip. The friction of the road on the tyres acts

Conical pendulum and motion in a vertical circle

Tie a small bob to a string of length $L$ and swing it so that it moves in a horizontal circle while the string sweeps out a cone of half-angle $\theta$ about the vertical. This is a conical pendulum. The bob moves on a circle of radius $r=L\sin\theta$ — not $L$. Only two forces act: the weight $mg$ and the tension $T$ along the string. Vertically there is no acceleration; horizontally the net force is centripetal:

$$T\cos\theta=mg,\qquad T\sin\theta=m\omega^2(L\sin\theta).$$
📐 Result 3.18 — Conical pendulum

A bob on a light string of length $L$ moving uniformly in a horizontal circle with the string at angle $\theta$ to the vertical has

$$T=m\omega^2L=\frac{mg}{\cos\theta},\qquad\cos\theta=\frac{g}{\omega^2L},$$ $$\text{period }\ P=\frac{2\pi}{\omega}=2\pi\sqrt{\frac{L\cos\theta}{g}},\qquad\tan\theta=\frac{v^2}{rg}.$$

The motion is possible only for $\omega\gt\sqrt{g/L}$; as $\omega$ grows, $\theta$ approaches (but never reaches) $90^\circ$ and the tension grows without limit. The angle does not depend on the mass. The period depends only on the height $h=L\cos\theta$ of the pivot above the plane of the circle.

Notice that $\tan\theta=v^2/(rg)$ is the same relation as for the frictionless banked road: in both cases a single contact force (tension or normal force), tilted at $\theta$ to the vertical, together with gravity, provides the centripetal force. The same equation describes a cyclist leaning into a flat turn and an aircraft banking to turn — and a ball rolling round inside a smooth bowl.

✏️ Example 6 — A conical pendulum
A $0.20\ \text{kg}$ bob on a $1.0\ \text{m}$ string moves as a conical pendulum with the string at $60^\circ$ to the vertical. Find (a) the tension, (b) the angular speed and the period, (c) the speed of the bob. (d) What is the least angular speed at which the bob can move in a horizontal circle at all?
Find the angular speed in (b) before you open the solution:
(a) $T=\dfrac{mg}{\cos60^\circ}=\dfrac{1.96}{0.5}=3.92\ \text{N}$ — twice the weight.
(b) $\omega=\sqrt{\dfrac{g}{L\cos\theta}}=\sqrt{\dfrac{9.8}{0.5}}=4.43\ \text{rad/s}$; $P=\dfrac{2\pi}{\omega}=1.42\ \text{s}$.
(c) $r=L\sin60^\circ=0.866\ \text{m}$; $v=\omega r=3.83\ \text{m/s}$.
(d) $\cos\theta=\dfrac{g}{\omega^2L}\le1$ needs $\omega\ge\sqrt{g/L}=3.13\ \text{rad/s}$; below that the bob just hangs (or swings as an ordinary pendulum).
Check $T=m\omega^2L=0.20\times19.6\times1.0=3.92\ \text{N}$ ✓, and $\tan60^\circ=\dfrac{v^2}{rg}=\dfrac{14.7}{8.49}=1.73$ ✓.

With the string length $L=1.00\ \text{m}$, set $\omega=3.0\ \text{rad/s}$. At what angle to the vertical does the string settle?

Set $L=1.00\ \text{m}$, $\omega=3.0\ \text{rad/s}$: the readouts show angle $0^\circ$, tension $1.96\ \text{N}$ (just the weight $mg$), bob speed $0$, period $2.09\ \text{s}$. Here $g/(\omega^2L)=9.8/9=1.09$, which is more than $1$, so no angle has that cosine: a cone needs $\omega\gt\sqrt{g/L}=3.13\ \text{rad/s}$. Nudge $\omega$ to $3.2\ \text{rad/s}$ and the cone opens suddenly to $16.9^\circ$; at $5.0\ \text{rad/s}$ it is already $66.9^\circ$.
Interactive 2 — Conical Pendulum

A $0.20\ \text{kg}$ bob whirls on a string (the animation runs slower than real time). Increase $\omega$ and watch the cone open: the angle obeys $\cos\theta=g/(\omega^2L)$, so nothing happens until $\omega$ passes $\sqrt{g/L}$, and then the string rises steeply towards — but never reaches — the horizontal. The arrows show the tension (purple) and weight (black) on the bob; their sum (dashed red) is horizontal and points to the axis. The graph plots $\theta$ against $\omega$ for the chosen length.

5.0 rad/s1.00 m
angle $\theta$—
tension $T$—
bob speed $v$—
period—

Motion in a vertical circle — a first look. When a body moves round a vertical circle (a stone whirled on a string, a car over a hump, a roller-coaster loop), gravity has a component along the path, so the speed changes from point to point; working out how it changes needs the energy methods of Chapter 4. But at the top and bottom points the radial equation alone tells us a great deal, because there the weight is purely radial:

Chapter 4 shows, using energy, that a body on a string needs at least $\sqrt{5gr}$ at the bottom to get round the top.

✏️ Example 7 — NEET-style: scaling and unit checks on curves
(a) On a level road the radius of a curve is doubled, but the road is resurfaced so that the coefficient of static friction is halved. The maximum safe speed on the curve (A) is unchanged (B) is doubled (C) is halved (D) becomes $\sqrt2$ times as large.
(b) A curve of radius $10\ \text{m}$ is to be banked so that vehicles travelling at $36\ \text{km/h}$ need no friction. Taking $g=10\ \text{m/s}^2$, the banking angle is (A) $30^\circ$ (B) $45^\circ$ (C) $85.6^\circ$ (D) $60^\circ$.
Find $\tan\theta$ for part (b) before you open the solution:
(a) Proportions $v_{\max}=\sqrt{\mu_srg}$ (Result 3.16), so $v_{\max}\propto\sqrt{\mu_sr}$. The product $\mu_sr$ is $\tfrac12\times2=1$ times the old value.
Answer (a) (A) unchanged.
(b) Units first $36\ \text{km/h}=10\ \text{m/s}$. Then $\tan\theta=\dfrac{v^2}{rg}=\dfrac{100}{10\times10}=1$ (Result 3.17).
Answer (b) (B) $45^\circ$.
⏱ Shortcut In (a) never compute a speed: write the formula as a proportion and multiply the factors. In (b), (C) is what $v=36$ (unconverted) gives, $\tan\theta=12.96$ — a road banked at $86^\circ$ is a wall, so the option kills itself. NEET distractors are often built from exactly this km/h slip.
⚠️ NEET traps

1. Drawing "the centripetal force" as an extra arrow. In the ground frame the free-body diagram contains only real forces (weight, normal force, tension, friction); their resultant is $mv^2/r$. Add a centrifugal force only if you have chosen to work in the rotating frame — and it has no reaction partner.

2. Statement traps on uniform circular motion. The speed is constant but the velocity is not, so the net force is not zero. The centripetal force is perpendicular to the velocity and does no work. If the string breaks, the body moves off along the tangent, not radially outward.

3. Resolving along the slope on a banked road. The acceleration is horizontal, so resolve horizontally and vertically. That gives $N=mg/\cos\theta$ at the design speed — not $mg\cos\theta$, which belongs to a block at rest on an incline.

4. Friction's direction on a bank. Above $v_0$ the car tends to slide up and out, so friction acts down the slope; below $v_0$ it acts up the slope. If $\mu_s\ge\tan\theta$, $v_{\min}=0$.

5. Wrong radius in the conical pendulum. The bob's circle has radius $L\sin\theta$, not $L$. With the correct radius, $T=m\omega^2L$ exactly.

6. Units, square roots and mass. Convert km/h to m/s ($\div3.6$) before using $v^2/r$; $v_{\max}\propto\sqrt{\mu_sr}$, so halving $\mu_s$ divides the speed by $\sqrt2$. The safe speeds, the banking angle and the conical-pendulum angle do not depend on the mass — an option containing $m$ is wrong.

A bob on a $1.0\ \text{m}$ string moves as a conical pendulum with the string at $30^\circ$ to the vertical. The radius of the bob's circle is

Exercises

Take $g=9.8\ \text{m/s}^2$ unless told otherwise. Treat vehicles as particles.

I
Centripetal force and its sources.
  • 1 Find the net force on a $1200\ \text{kg}$ car moving at a steady $15\ \text{m/s}$ round a circular track of radius $45\ \text{m}$.
  • 2 A $0.50\ \text{kg}$ ball on a $1.2\ \text{m}$ string moves in a horizontal circle on a smooth table at $3.0$ revolutions per second. Find the tension.
  • 3 A string that breaks at $80\ \text{N}$ whirls a $0.40\ \text{kg}$ stone in a horizontal circle of radius $0.60\ \text{m}$ on a smooth surface. Find the greatest possible speed.
  • 4 In a fairground "rotor", riders stand against the wall of a drum of radius $2.5\ \text{m}$ and the floor drops away; $\mu_s=0.40$ between rider and wall. Find the least angular speed (in rad/s and rpm) that keeps them from sliding down.
  • 5 A coin $20\ \text{cm}$ from the centre of a turntable starts to slip when the turntable reaches $40\ \text{rpm}$. Find $\mu_s$.
  • 6 A $0.50\ \text{kg}$ particle moves on a circle of radius $2.0\ \text{m}$. At one instant its speed is $4.0\ \text{m/s}$ and increasing at $3.0\ \text{m/s}^2$. Find the net force on it and its angle with the radius.
  • 7 A $60\ \text{kg}$ passenger sits in a car turning on a circle of radius $30\ \text{m}$ at $12\ \text{m/s}$. Find the centrifugal force in the car's frame, and the real force the seat exerts on the passenger horizontally.
  • 8 A $0.10\ \text{kg}$ puck on a smooth table moves in a circle of radius $0.40\ \text{m}$, held by a string that passes through a hole at the centre to a hanging $0.50\ \text{kg}$ mass at rest. Find the speed of the puck.
1 $F=\dfrac{mv^2}{r}=\dfrac{1200\times225}{45}=6.0\times10^3\ \text{N}$, towards the centre.
2 $\omega=6\pi=18.85\ \text{rad/s}$; $T=m\omega^2r=0.50\times355.3\times1.2=213\ \text{N}$.
3 $v=\sqrt{\dfrac{80\times0.60}{0.40}}=\sqrt{120}=11\ \text{m/s}$.
4 Wall's normal force $N=m\omega^2r$ is centripetal; friction holds the weight: $\mu_sm\omega^2r\ge mg$, so $\omega\ge\sqrt{\dfrac{g}{\mu_sr}}=\sqrt{\dfrac{9.8}{1.0}}=3.13\ \text{rad/s}=30\ \text{rpm}$.
5 $\omega=\dfrac{40\times2\pi}{60}=4.19\ \text{rad/s}$; $\mu_s=\dfrac{\omega^2r}{g}=\dfrac{17.55\times0.20}{9.8}=0.36$.
6 Radial $a=\dfrac{16}{2.0}=8.0\ \text{m/s}^2$, tangential $3.0\ \text{m/s}^2$; $F=0.50\sqrt{64+9}=4.3\ \text{N}$, at $\tan^{-1}\dfrac{3}{8}=21^\circ$ to the radius (ahead of it).
7 Centrifugal $\dfrac{mv^2}{r}=\dfrac{60\times144}{30}=288\ \text{N}$ outward (pseudo); the seat pushes $288\ \text{N}$ inward (real).
8 Tension $=Mg=4.9\ \text{N}=\dfrac{mv^2}{r}$: $v=\sqrt{\dfrac{4.9\times0.40}{0.10}}=4.4\ \text{m/s}$.
II
Level and banked roads.
  • 1 Find the maximum speed at which a car can take a level curve of radius $80\ \text{m}$ if $\mu_s=0.50$.
  • 2 What least coefficient of friction lets a car take a level curve of radius $100\ \text{m}$ at $90\ \text{km/h}$?
  • 3 A cyclist rides round a level circular track of radius $15\ \text{m}$ at $6.0\ \text{m/s}$. At what angle to the vertical must she lean?
  • 4 Find the banking angle for a curve of radius $200\ \text{m}$ designed for $90\ \text{km/h}$.
  • 5 A broad-gauge track (rails $1.676\ \text{m}$ apart) curves with radius $400\ \text{m}$. By how much must the outer rail be raised for trains at $72\ \text{km/h}$ to need no sideways force from the rails?
  • 6 A frictionless track of radius $60\ \text{m}$ is banked at $30^\circ$. Find the speed at which a car can go round it.
  • 7 A curve of radius $100\ \text{m}$ is banked at $20^\circ$; $\mu_s=0.40$. Find the maximum and minimum safe speeds.
  • 8 Repeat part 7 for an oily road with $\mu_s=0.10$.
  • 9 Find the normal force on a $1500\ \text{kg}$ car taking the curve of part 7 at its design (no-friction) speed, and compare it with the car's weight.
1 $v=\sqrt{0.50\times80\times9.8}=\sqrt{392}=19.8\ \text{m/s}=71\ \text{km/h}$.
2 $v=25\ \text{m/s}$; $\mu_s\ge\dfrac{v^2}{rg}=\dfrac{625}{980}=0.64$.
3 The road's contact force must point along the line through her centre of mass: $\tan\theta=\dfrac{v^2}{rg}=\dfrac{36}{147}=0.245$, $\theta=13.8^\circ$.
4 $\tan\theta=\dfrac{625}{1960}=0.319$; $\theta=17.7^\circ$.
5 $\tan\theta=\dfrac{400}{400\times9.8}=0.102$; $h=d\sin\theta=1.676\times0.1015=0.17\ \text{m}$ ($17\ \text{cm}$).
6 $v_0=\sqrt{60\times9.8\times\tan30^\circ}=\sqrt{339.5}=18.4\ \text{m/s}$.
7 $\tan20^\circ=0.364$. $v_{\max}=\sqrt{980\times\dfrac{0.764}{0.854}}=29.6\ \text{m/s}$; since $\mu_s\gt\tan20^\circ$, $v_{\min}=0$ — a car can even stand still on this bank.
8 $v_{\max}=\sqrt{980\times\dfrac{0.464}{0.964}}=21.7\ \text{m/s}$; $v_{\min}=\sqrt{980\times\dfrac{0.264}{1.036}}=15.8\ \text{m/s}$ — a narrow window.
9 $N=\dfrac{mg}{\cos20^\circ}=\dfrac{14\,700}{0.9397}=1.56\times10^4\ \text{N}$, about $6\%$ more than the weight $1.47\times10^4\ \text{N}$.
III
Conical pendulum and vertical circles.
  • 1 A conical pendulum has a string $0.80\ \text{m}$ long at $30^\circ$ to the vertical. Find its period.
  • 2 If the bob in part 1 has mass $0.50\ \text{kg}$, find the tension.
  • 3 A bob on a $1.2\ \text{m}$ string is whirled as a conical pendulum at $1.0$ revolution per second. Find the angle of the string with the vertical.
  • 4 A string can bear a tension of at most three times the weight of its bob. Find the largest angle it can make with the vertical as a conical pendulum, and the corresponding $\omega$ for $L=0.50\ \text{m}$.
  • 5 A $1000\ \text{kg}$ car goes over a hump of radius $25\ \text{m}$ at $10\ \text{m/s}$. Find the normal force at the top, and the speed at which the car would lose contact.
  • 6 A bucket of water is swung in a vertical circle of radius $1.0\ \text{m}$. Find the least speed at the top for the water to stay in.
  • 7 A $70\ \text{kg}$ pilot pulls out of a dive along a vertical circle of radius $400\ \text{m}$ at $100\ \text{m/s}$. Find the force of the seat on the pilot at the lowest point, as a multiple of the weight.
  • 8 An $800\ \text{kg}$ car passes through a dip of radius $30\ \text{m}$ at $12\ \text{m/s}$. Find the normal force at the lowest point.
1 $P=2\pi\sqrt{\dfrac{0.80\cos30^\circ}{9.8}}=2\pi\sqrt{0.0707}=1.67\ \text{s}$.
2 $T=\dfrac{mg}{\cos30^\circ}=\dfrac{4.9}{0.866}=5.66\ \text{N}$.
3 $\omega=2\pi$; $\cos\theta=\dfrac{g}{\omega^2L}=\dfrac{9.8}{39.48\times1.2}=0.207$; $\theta=78^\circ$.
4 $T=\dfrac{mg}{\cos\theta}\le3mg$: $\cos\theta\ge\tfrac13$, $\theta_{\max}=70.5^\circ$. $\omega^2=\dfrac{T}{mL}=\dfrac{3g}{L}$: $\omega=\sqrt{58.8}=7.7\ \text{rad/s}$.
5 $N=m\left(g-\dfrac{v^2}{r}\right)=1000(9.8-4.0)=5.8\times10^3\ \text{N}$; contact is lost at $v=\sqrt{gr}=\sqrt{245}=15.7\ \text{m/s}$.
6 $v_\text{top}\ge\sqrt{gr}=3.1\ \text{m/s}$ (then gravity alone gives the centripetal acceleration).
7 $N=m\left(g+\dfrac{v^2}{r}\right)=70(9.8+25)=2.44\times10^3\ \text{N}=3.6\,mg$.
8 $N=800\left(9.8+\dfrac{144}{30}\right)=800\times14.6=1.17\times10^4\ \text{N}$.
IV
Harder problems and applications.
  • 1 A car starts from rest on a level circular track of radius $50\ \text{m}$ and speeds up with a constant tangential acceleration of $2.0\ \text{m/s}^2$; $\mu_s=0.50$. At what speed does it begin to skid?
  • 2 Two identical coins sit on a turntable, at $10\ \text{cm}$ and $20\ \text{cm}$ from the centre; $\mu_s=0.25$. Which slips first, and at what angular speed?
  • 3 A velodrome track of radius $25\ \text{m}$ is banked at $42^\circ$. Find the speed at which a cyclist needs no sideways friction.
  • 4 (Modelling) A highway exit ramp has radius $60\ \text{m}$ and is banked at $10^\circ$. Designers assume $\mu_s=0.30$ on a wet road. Find the maximum safe speed in km/h and suggest a posted speed limit.
  • 5 A small ball rolls without friction round the inside of a hemispherical bowl of radius $0.50\ \text{m}$, in a horizontal circle; the line from the centre of the bowl to the ball makes $60^\circ$ with the vertical. Find its angular speed.
  • 6 Explain why the design speed of a banked road does not depend on the mass of the vehicle, and why, on a level road, a car skids outward rather than "flying off" radially.
1 Friction supplies both components: $\sqrt{(v^2/r)^2+a_t^2}\le\mu_sg=4.9$. So $\dfrac{v^2}{r}=\sqrt{24.01-4.0}=4.47\ \text{m/s}^2$ and $v=\sqrt{223.7}=15\ \text{m/s}$.
2 The outer coin needs more friction ($\omega^2r$ is larger), so it slips first: $\omega=\sqrt{\dfrac{0.25\times9.8}{0.20}}=3.5\ \text{rad/s}$.
3 $v_0=\sqrt{25\times9.8\times\tan42^\circ}=\sqrt{220.6}=14.9\ \text{m/s}=53\ \text{km/h}$.
4 $v_{\max}=\sqrt{588\times\dfrac{0.1763+0.30}{1-0.0529}}=\sqrt{295.7}=17.2\ \text{m/s}=62\ \text{km/h}$; a posted limit of about $50\ \text{km/h}$ leaves a safety margin.
5 The bowl's normal force acts along the radius of the bowl, like a pendulum string of length $0.50\ \text{m}$: $\omega=\sqrt{\dfrac{g}{R\cos60^\circ}}=\sqrt{39.2}=6.3\ \text{rad/s}$.
6 Both $N\sin\theta=mv^2/r$ and $N\cos\theta=mg$ are proportional to $m$, which cancels in $\tan\theta=v^2/(rg)$. When friction is insufficient, the car is not pushed outward; it fails to turn sharply enough, moving more nearly along its tangent, which carries it towards the outside of the curve.
🎯 Exam corner NEET · MCQ

E1. NEET · MCQ Statement I: When a body moves uniformly in a circle, the centripetal force does no work on it. Statement II: When a car takes a level curve without skidding, the centripetal force is provided by kinetic friction between the tyres and the road. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement I The centripetal force is always perpendicular to the velocity, so it changes only the direction of motion, never the speed: it does no work. Correct.
Statement II The tyres roll without slipping, so there is no sliding at the contact: the sideways force is static friction (Result 3.16). Kinetic friction would mean the car is already skidding. Incorrect.
Answer (C).
⏱ Shortcut "Without skidding" or "without slipping" in a question always means static friction.

E2. NEET · MCQ Assertion (A): Roads are banked at curves, the outer edge being raised above the inner edge. Reason (R): On a banked road the horizontal component of the normal force provides some or all of the centripetal force, so less friction is needed. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Assertion True — highways, railway tracks and velodromes are banked.
Reason True: on a road tilted at $\theta$ the normal force leans towards the centre and $N\sin\theta$ points inward; at the design speed it supplies all of $mv^2/r$ ($\tan\theta=v^2/rg$). This is exactly why roads are banked — friction is unreliable in rain and oil.
Answer (A).
⏱ Shortcut If R is the purpose of A — "why do we do this?" answered by "because it achieves that" — the answer is (A).

E3. NEET · MCQ Match each motion in List-I with the force in List-II that provides its centripetal force.
List-I: (a) the Moon going round the Earth (b) a car taking a level curve (c) a stone whirled in a horizontal circle on a smooth table by a string tied to a peg (d) a rider pressed against the wall of a spinning "rotor" drum
List-II: (i) normal force (ii) tension (iii) static friction (iv) gravitational force
Choose the correct answer: (A) a-iv, b-ii, c-iii, d-i (B) a-i, b-iii, c-ii, d-iv (C) a-iv, b-iii, c-i, d-ii (D) a-iv, b-iii, c-ii, d-i

Pair them (a) The Earth's gravity, (iv). (b) Static friction of the road on the tyres, (iii). (c) The tension in the string, (ii). (d) The wall pushes the rider inward — the normal force, (i); friction on the wall only holds the rider up.
Answer (D) a-iv, b-iii, c-ii, d-i.
⏱ Shortcut The Moon fixes a-iv, leaving (A), (C) and (D); the car fixes b-iii, leaving (C) and (D); the string can only pull by tension — (D).

E4. NEET · MCQ How many of the following statements are correct?
(i) The maximum safe speed of a car on a level curve does not depend on the mass of the car.
(ii) On a frictionless banked road there is only one speed at which a car can take the curve without slipping.
(iii) On a banked road with friction, a car going faster than the design speed needs friction acting up the slope.
(iv) At the design speed of a banked road, the normal force on a car is $mg\cos\theta$.
(v) Taking a level curve at twice the speed needs four times the friction force.
(A) Two (B) Three (C) Four (D) One

Check each (i) ✓ — $v_{\max}=\sqrt{\mu_srg}$. (ii) ✓ — only $v_0=\sqrt{rg\tan\theta}$. (iii) ✗ — above $v_0$ the car tends to slide up and out, so friction acts down the slope. (iv) ✗ — resolving vertically, $N\cos\theta=mg$, so $N=mg/\cos\theta$. (v) ✓ — $f=mv^2/r\propto v^2$.
Answer (B) three: (i), (ii) and (v).
⏱ Shortcut (iii) and (iv) are the two banked-road traps of this section (⚠️ traps 3 and 4) — learn them as a pair.

E5. NEET · MCQ The figure shows a road that rises over a hump (top P) and then runs through a dip (lowest point Q). Both are vertical arcs of radius $40\ \text{m}$. A $1000\ \text{kg}$ car passes P and Q at $10\ \text{m/s}$. Taking $g=10\ \text{m/s}^2$, the ratio of the normal force of the road on the car at Q to that at P is (A) $3/5$ (B) $1$ (C) $5/3$ (D) $4/3$
P Q centre below centre above both arcs: r = 40 m

At P (hump) The centre is below the car, so the net downward force is centripetal: $mg-N_P=\dfrac{mv^2}{r}$, giving $N_P=1000\left(10-\dfrac{100}{40}\right)=7500\ \text{N}$.
At Q (dip) The centre is above: $N_Q-mg=\dfrac{mv^2}{r}$, giving $N_Q=1000(10+2.5)=12\,500\ \text{N}$.
Answer (C) $\dfrac{N_Q}{N_P}=\dfrac{12\,500}{7500}=\dfrac53$.
⏱ Shortcut Work in units of $g$: $v^2/r=2.5=\tfrac14g$, so $N_Q:N_P=(1+\tfrac14):(1-\tfrac14)=5:3$. The car presses harder in the dip, so the ratio must exceed $1$ — (A) is the ratio inverted. The mass is not needed at all.

E6. NEET · MCQ A curve of radius $40\ \text{m}$ is banked at $45^\circ$, and the coefficient of static friction between the tyres and the road is $0.5$. The ratio of the greatest to the least speed at which a car can take the curve without slipping is (A) $3$ (B) $\sqrt3$ (C) $9$ (D) $2$

Formulas Result 3.17 with $\tan45^\circ=1$: $v_{\max}^2=rg\,\dfrac{1+0.5}{1-0.5}=3rg$ and $v_{\min}^2=rg\,\dfrac{1-0.5}{1+0.5}=\dfrac{rg}{3}$.
Ratio $\dfrac{v_{\max}^2}{v_{\min}^2}=9$, so $\dfrac{v_{\max}}{v_{\min}}=3$ ($v_{\max}=20\sqrt3\approx34.6\ \text{m/s}$, $v_{\min}=\tfrac{20}{\sqrt3}\approx11.5\ \text{m/s}$ with $g=10\ \text{m/s}^2$).
Answer (A) $3$.
⏱ Shortcut $r$ and $g$ cancel in the ratio, so the radius is a red herring. (C) forgets the square root — the formulas give $v^2$, not $v$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. How much sideways acceleration do drivers actually use on real roundabouts and bends — and how close is it to the friction limit $\mu_sg$?

Why it matters. Highway engineers in many countries design curves using a "side friction factor" — the fraction of $g$ that the tyres may be asked to supply sideways — usually only about $0.1$ to $0.2$, far below the $0.6$–$0.9$ that dry tyres can give. The gap is a safety margin for rain, worn tyres and driver error. With a phone accelerometer you can measure what drivers really use and test the model $a=v^2/r$.

What to do.

  1. Only as a passenger, with the driver's agreement and the phone fixed flat in a holder, record the sideways acceleration with a free sensor app while the car goes round a few roundabouts and bends at normal speed. Note the speedometer reading at mid-curve (or log speed with a GPS app).
  2. Find the radius of each curve from an online map: fit a circle to three points on the road and measure its radius with the map's scale tool.
  3. Compute $v^2/r$ for each curve and compare with the measured sideways acceleration. Make a table and a graph of measured against predicted values.
  4. Express each measured acceleration as a fraction of $g$. How does it compare with the design range $0.1$–$0.2$ and with a dry-road $\mu_s\approx0.7$?
  5. Estimate, for one curve, the maximum safe speed in the dry and in the wet ($\mu_s\approx0.3$), using Result 3.16.

Tools: Phone with an accelerometer/GPS logging app, phone holder, online map with a scale tool, spreadsheet.

Hand in: The table and graph, the safe-speed estimates, and a short paragraph on whether drivers stay inside the engineers' margin.

Going further. Many curves are slightly banked. Measure (or estimate) the bank angle of one curve with the phone's inclinometer while parked safely, and work out its design speed $v_0=\sqrt{rg\tan\theta}$. Why do race tracks and velodromes use much steeper banking than highways?

Instructor note: typical roundabouts have radii of $15$–$30\ \text{m}$ and are driven at $20$–$30\ \text{km/h}$, giving sideways accelerations of about $1.5$–$3\ \text{m/s}^2$ ($0.15$–$0.3\,g$) — usually agreeing with $v^2/r$ within $20\%$, the main errors being the radius estimate and the speed at the instant measured. Stress safety: the student must never operate the phone while driving.

🧪 Self-check quiz

0/5 correct

Q1. A car takes a level circular curve of radius $20\ \text{m}$; the coefficient of static friction between tyres and road is $0.5$ ($g=10\ \text{m/s}^2$). The greatest speed at which it can take the curve without skidding is

Q2. On a frictionless banked road, the speed at which a vehicle can take the curve depends on

Q3. As the angular speed of a conical pendulum is increased, the angle of its string with the vertical

Q4. A bucket of water is swung in a vertical circle of radius $0.9\ \text{m}$ ($g=10\ \text{m/s}^2$). The least speed at the top for the water not to fall out is

Q5. A stone tied to a string is whirled in a horizontal circle, and the string suddenly breaks. Just afterwards the stone moves