7.4 Surface Tension
A liquid surface behaves like a stretched skin: it pulls along every line drawn on it with a force $S$ per unit length and stores energy $S$ per unit area. From that one idea come round drops, the extra pressure $2S/R$ inside them, the contact angle and the rise of water up a thin tube, $h=2S\cos\theta/\rho gr$.
A steel needle laid gently on water floats, although steel is nearly eight times denser than water. Pond skaters run across the surface of a pond without getting their feet wet. Rain falls as round drops, and a soap film stretched on a wire loop snaps into the smallest area it can. Water creeps up a thin glass tube, into the fibres of a towel and up through the soil to a plant's roots — while mercury in a glass tube sits lower than the mercury around it. All of these come from one property of a liquid's surface: surface tension.
A liquid surface is not just the place where the liquid stops. The molecules there are in a different situation from those inside, and as a result the surface behaves like a stretched elastic membrane, always trying to shrink. In this section we explain where surface tension comes from and link it to surface energy, see how the angle of contact decides whether a liquid wets a solid, find the excess pressure inside drops and bubbles, and put it all together to explain capillary rise — the basis of the experiment on the surface tension of water in the NEET list of experimental skills (Chapter 20). NEET asks about this section almost every year, in short MCQs: the excess pressure inside drops and bubbles (and how many surfaces to count), the work to blow a bubble or split a drop, capillary rise by ratio from $h\propto1/r$, and statements about the angle of contact, detergents and temperature to be judged true or false.
Surface tension and surface energy
Molecules of a liquid attract each other with short-range forces (they act only over a few molecular diameters). A molecule deep inside the liquid is pulled equally in all directions by its neighbours, so the net force on it is zero. A molecule at the surface has liquid neighbours only below and beside it; the pull of the few vapour molecules above is negligible. So it has a net inward pull, and — more importantly — it has fewer neighbours to bond with. Bringing a molecule from the interior to the surface means breaking some of its bonds: it costs energy. A liquid therefore has extra energy in proportion to its surface area, and, left to itself, it takes the shape of least surface area — a sphere, for a small drop where gravity hardly matters.
The surface tension $S$ of a liquid is the force per unit length acting in the surface, perpendicular to any line drawn in the surface, on each side of it, tending to pull the surface together:
$$S=\frac{F}{L}.$$Its SI unit is $\text{N/m}$ and its dimensions are $[\text{MT}^{-2}]$. It depends on the liquid, on what lies on the other side of the surface (air, another liquid, a solid) and on the temperature: for most liquids $S$ decreases as the temperature rises, and dissolved detergents and soaps lower it strongly.
Typical values against air near $20^\circ\text{C}$: water $0.073\ \text{N/m}$, soap solution about $0.025$–$0.030\ \text{N/m}$, ethanol $0.022\ \text{N/m}$, mercury $0.465\ \text{N/m}$. A neat way to see the force is a soap film on a U-shaped wire frame with a light sliding wire of length $L$ across it. The film pulls the slider inwards; to hold it still you must pull outward with a force $F$. A film has two surfaces (front and back), each pulling with $SL$, so $F=2SL$.
Now pull the slider out slowly through a distance $x$. You do work $W=Fx=2SLx$, and the film's area grows by $Lx$ on each face, a total new surface of $\Delta A=2Lx$. So the work done per unit area of new surface is $W/\Delta A=S$. This work is stored as surface energy (at constant temperature).
The surface energy of a liquid is the extra potential energy its surface molecules have compared with molecules in the interior. The work needed to increase the area of a liquid surface by $\Delta A$ at constant temperature is
$$W=S\,\Delta A .$$At constant temperature, the surface tension of a liquid is numerically equal to its surface energy per unit area: $S$ in $\text{N/m}$ is the same number as $S$ in $\text{J/m}^2$. When counting area, count every surface that is created: a soap film or a soap bubble has two surfaces (inside and outside), a liquid drop has one.
Because surface energy is $S\times$area, splitting a drop into many small droplets creates surface and needs work, while droplets that merge into one drop lose surface and release energy (as heat). For a drop of radius $R$ split into $n$ equal droplets, volume conservation gives droplet radius $r=R/n^{1/3}$, and the total area grows from $4\pi R^2$ to $n\cdot4\pi r^2=n^{1/3}\cdot4\pi R^2$, so $W=4\pi R^2S\,(n^{1/3}-1)$.
A soap film is formed on a wire frame with a sliding wire of length $L$. The surface tension of the solution is $S$. The force the film exerts on the slider is
Angle of contact
Where a liquid surface meets a solid, two kinds of attraction compete: cohesion (the attraction between molecules of the liquid) and adhesion (the attraction between molecules of the liquid and of the solid). If adhesion wins, the liquid spreads over the solid and climbs a little up its wall: water in a clean glass tumbler curves up at the edge. If cohesion wins, the liquid pulls back into itself and curves down at the wall: mercury in a glass tube, or water drops on a waxed car or a lotus leaf, which stand up as beads.
The angle of contact $\theta$ between a liquid and a solid is the angle between the solid surface and the tangent to the liquid surface at the point of contact, measured inside the liquid.
- $\theta\lt90^\circ$: the liquid wets the solid (adhesion dominates); the meniscus in a tube is concave (curving up at the wall). Water on clean glass: $\theta\approx0^\circ$.
- $\theta\gt90^\circ$: the liquid does not wet the solid (cohesion dominates); the meniscus is convex. Mercury on glass: $\theta\approx140^\circ$; water on wax or a water-repellent fabric: $\theta\gt90^\circ$.
The angle of contact depends on the pair of substances, on the cleanliness of the surface and on impurities in the liquid.
Why the contact angle has the value it has. A drop on a flat solid has a line of contact where three surfaces meet: solid–air, solid–liquid and liquid–air, each with its own surface tension $S_\text{sa}$, $S_\text{sl}$, $S_\text{la}$. Each pulls the contact line along its own surface. In equilibrium the components along the solid surface balance.
For a liquid resting on a solid in air, the balance of surface-tension forces along the solid surface at the line of contact gives
$$S_\text{sa}=S_\text{sl}+S_\text{la}\cos\theta,\qquad\text{so}\qquad\cos\theta=\frac{S_\text{sa}-S_\text{sl}}{S_\text{la}}.$$If $S_\text{sl}\lt S_\text{sa}$, then $\cos\theta\gt0$ and $\theta$ is acute (the liquid wets the solid); if $S_\text{sl}\gt S_\text{sa}$, $\theta$ is obtuse.
Detergents and waterproofing. Water alone has a fairly large $S_\text{la}$ and does not easily soak into greasy fibres. Detergent molecules gather at the surfaces; they lower the surface tension of water against air and against grease, which reduces the angle of contact. The water then wets the cloth and gets between the fibres and the dirt, and the grease is lifted off in tiny droplets surrounded by detergent. Waterproofing agents do the opposite: they coat fibres with a substance that water does not wet, raising the angle of contact above $90^\circ$, so water stands as beads and runs off. Soldering fluxes and the "wetting agents" sprayed with pesticides are other applications.
Water stands in round beads on a freshly waxed car bonnet, but spreads into a thin film on clean glass. This shows that
Excess pressure across a curved surface
Blow up a balloon and the stretched rubber squeezes the air inside, so the air inside is at a higher pressure than outside. A liquid surface does the same: wherever it is curved, its tension pulls it towards the centre of curvature, and the pressure on the concave side must be larger than on the convex side to hold it in place. The flatter the surface, the smaller this excess pressure; a plane surface has none.
For a spherical surface of radius $R$ of a liquid with surface tension $S$, the pressure on the concave (inner) side exceeds that on the convex side by
- a liquid drop in air, or an air bubble inside a liquid (one surface): $\ \Delta p=p_\text{in}-p_\text{out}=\dfrac{2S}{R}$;
- a soap bubble in air (a thin film with two surfaces, inner and outer, of almost the same radius): $\ \Delta p=\dfrac{4S}{R}$.
For a surface curved in one direction only (a cylinder of radius $R$, such as a liquid film between two close parallel plates), $\Delta p=S/R$.
Derivation (by energy). Imagine the radius of a drop increasing slowly from $R$ to $R+dR$. The excess pressure pushes the surface out through $dR$ over an area $4\pi R^2$, doing work $\Delta p\cdot4\pi R^2\,dR$. The surface area grows by $d(4\pi R^2)=8\pi R\,dR$, which needs energy $S\cdot8\pi R\,dR$. Equating, $\Delta p=\dfrac{2S}{R}$. For a soap bubble two surfaces grow, the energy needed doubles, and $\Delta p=\dfrac{4S}{R}$.
The striking consequence is that the smaller the bubble, the larger the pressure inside it. Connect a small soap bubble to a large one through a tube and open the tap: air flows from the small bubble into the large one, so the small one shrinks and the large one grows (Interactive 1). The same effect makes it hard to start blowing up a balloon — and makes the tiny air sacs (alveoli) of the lungs prone to collapse, which is why the lungs produce a natural "surfactant" that lowers the surface tension of the fluid lining them.
- Count the surfaces: drop or bubble in a liquid — one ($2S/R$); soap bubble in air — two ($4S/R$).
- Find the pressure just outside the surface: $p_0$ in air; $p_0+\rho gh$ for a bubble at depth $h$ in a liquid.
- Add the excess pressure: $p_\text{in}=p_\text{out}+\Delta p$.
- For two bubbles stuck together, the common film separates two gases whose pressure difference is $4S/r_1-4S/r_2$; it bulges into the larger bubble with radius $r=\dfrac{r_1r_2}{r_2-r_1}$.
In Interactive 1 set $r_1=2.0\ \text{cm}$, $r_2=4.0\ \text{cm}$ and $S=0.030\ \text{N/m}$. When the tap is opened (press Play), which way does the air flow, and what are the two excess pressures?
The excess pressure inside a soap bubble of radius $R$ is $\Delta p$. The excess pressure inside a soap bubble of radius $2R$ blown from the same solution is
Capillary rise
Dip a clean glass tube with a fine bore — a capillary tube (Latin capillus, a hair) — into water. The water rises inside it well above the outside level, and the finer the tube, the higher it goes. Dip it into mercury and the mercury inside stands below the outside level. This is capillarity, and it follows from the two ideas above: the angle of contact and the excess pressure across a curved surface.
The pressure argument. Water wets glass ($\theta\approx0$), so the meniscus in the tube is concave, part of a sphere of radius $R=r/\cos\theta$, where $r$ is the radius of the tube (for $\theta=0$ it is a hemisphere, $R=r$). Just below a concave surface the pressure is lower than above it by $2S/R$. At first the water inside is level with the outside, so the pressure just under the meniscus is $p_0-2S/R$, less than the pressure $p_0$ at the same level outside. Water is pushed up the tube until the column of height $h$ makes up the difference: $\rho gh=\dfrac{2S}{R}=\dfrac{2S\cos\theta}{r}$.
The force argument. Around the circle of contact, of length $2\pi r$, the liquid surface pulls with $S$ per unit length along the tangent to the meniscus, which makes angle $\theta$ with the wall. By Newton's third law the wall pulls the liquid up with vertical component $2\pi rS\cos\theta$. This supports the weight of the raised column, $\pi r^2h\rho g$ (neglecting the small volume in the meniscus). Setting them equal gives the same answer.
A liquid of surface tension $S$, density $\rho$ and angle of contact $\theta$ rises in a vertical capillary tube of radius $r$ to a height
$$h=\frac{2S\cos\theta}{\rho gr}$$above the outside level (neglecting the liquid in the meniscus). For $\theta\lt90^\circ$, $h\gt0$ (capillary rise: water in glass); for $\theta\gt90^\circ$, $h\lt0$ (capillary depression: mercury in glass). For a given liquid and tube material, $hr$ is constant: $h\propto1/r$.
Four consequences are NEET favourites:
- Tilted tube. The vertical height $h$ is fixed by the pressure balance, so in a tube inclined at angle $\alpha$ to the vertical the liquid runs further along the tube, a length $\ell=h/\cos\alpha$.
- Tube of insufficient length. If the tube sticks out of the liquid by less than $h$, the liquid rises to the top and does not overflow. It cannot: there is no extra energy to drive a fountain. Instead the meniscus becomes flatter — its radius increases to $R'$ with $R'\times\ell=R\times h$ (so that $2S/R'=\rho g\ell$), and the contact angle at the rim adjusts to $\cos\theta'=r/R'$.
- Weight of the column. The weight of liquid lifted, $2\pi rS\cos\theta$, is proportional to $r$ — a wider tube lifts more liquid, but to a smaller height.
- Effective gravity. $h\propto1/g$: on the Moon water rises six times higher than on the Earth, and in a lift accelerating upward at $a$ you replace $g$ by $g+a$. In free fall — a falling lift, or an orbiting spacecraft — nothing balances the surface-tension pull, and the liquid climbs to the top of the tube, however long, without overflowing.
Capillarity carries water up through the fine gaps in soil and the fibres of a towel, draws ink into the nib of a fountain pen and oil up a lamp wick, and is the basis of the NEET practical (Chapter 20): measure $h$ and $r$ with a travelling microscope and compute $S=\dfrac{\rho grh}{2\cos\theta}$. Add a little detergent and the rise drops sharply, showing that the surface tension has fallen.
In Interactive 2 choose water and a tube of radius $0.50\ \text{mm}$ sticking out $12\ \text{cm}$: the water rises about $3.0\ \text{cm}$. Predict the rise when you reduce the radius to $0.25\ \text{mm}$.
(b) Water rises to a height $h$ in a clean glass capillary tube standing in a beaker of water. The beaker and tube are placed in a lift that accelerates upward at $g/2$. The water now stands at a height (A) $\tfrac23h$ (B) $\tfrac32h$ (C) $h$ (D) $\tfrac12h$.
1. Counting surfaces. A soap bubble or a soap film has two surfaces: excess pressure $4S/R$, work to blow a bubble of radius $R$ equal to $S\times2\times4\pi R^2=8\pi R^2S$, pull on a slider $2SL$. A liquid drop, or an air bubble inside a liquid, has one: $2S/R$ and $4\pi R^2S$. Options built on the other count are always on offer.
2. Splitting and merging drops. $n$ equal droplets from one drop each have radius $R/n^{1/3}$, and the total area grows by the factor $n^{1/3}$ — so the work is $4\pi R^2S\,(n^{1/3}-1)$, not $(n-1)$ times anything. Splitting absorbs energy; merging releases it, and the merged drop warms slightly. The big drop has the smaller excess pressure.
3. "Excess" pressure versus pressure inside. The pressure inside an air bubble at depth $h$ is $p_0+\rho gh+2S/R$; "excess pressure" alone is only the last term. And a smaller bubble has the larger pressure, so a small soap bubble empties into a large one joined to it.
4. What capillary rise depends on. $h=\dfrac{2S\cos\theta}{\rho gr}$: $h\propto1/r$ (the radius — halve a given diameter before using it) and $h\propto1/g$. A tilted tube keeps the same vertical height; a tube shorter than $h$ never overflows; in free fall the liquid rises to the top of any tube. Mercury ($\theta\gt90^\circ$) is depressed, because $\cos\theta\lt0$ — not because its surface tension is small (it is about six times that of water).
5. Statements NEET likes to test. $S$ falls as the temperature rises; detergents and soaps lower both $S$ and the angle of contact with cloth (waterproofing raises it above $90^\circ$); a liquid wets a solid when adhesion beats cohesion ($\theta\lt90^\circ$, concave meniscus). Surface tension (N/m) and surface energy per unit area (J/m²) are the same quantity, with dimensions $[\mathrm{M\,T^{-2}}]$ — the same as a spring constant.
Water rises $4.0\ \text{cm}$ in a capillary tube. In a tube of the same glass with half the radius, tilted so that it makes $60^\circ$ with the vertical, the length of the water column inside the tube is
Exercises
Take $g=9.8\ \text{m/s}^2$, the surface tension of water $0.073\ \text{N/m}$ with angle of contact $0^\circ$ on clean glass, the density of water $1.0\times10^3\ \text{kg/m}^3$ and atmospheric pressure $1.013\times10^5\ \text{Pa}$ unless told otherwise.
- 1 A soap film ($S=0.040\ \text{N/m}$) is held on a frame by a slider $5.0\ \text{cm}$ long. Find the force on the slider.
- 2 Find the work needed to increase the area of a soap film on a frame from $10\ \text{cm}^2$ to $40\ \text{cm}^2$ ($S=0.030\ \text{N/m}$).
- 3 Find the work done in blowing a soap bubble of radius $3.0\ \text{cm}$ ($S=0.030\ \text{N/m}$).
- 4 A thin wire ring of radius $2.5\ \text{cm}$ lies flat on a water surface. Find the extra force, beyond its weight, needed to lift it clear of the surface.
- 5 A greased needle $3.0\ \text{cm}$ long floats on water. Assuming the surface pulls vertically upward along both sides of the needle, estimate the largest mass it can have.
- 6 Find the work needed to spray a water drop of radius $1.0\ \text{mm}$ into droplets of radius $0.10\ \text{mm}$.
- 7 Sixty-four mercury drops, each of radius $1.0\ \text{mm}$, merge into one drop ($S=0.465\ \text{N/m}$). Find the energy released.
- 8 Explain, in terms of molecules, why a small drop is spherical and why surface tension falls as the temperature rises.
- 1 For a liquid on a solid, $S_\text{sa}-S_\text{sl}=0.050\ \text{N/m}$ and $S_\text{la}=0.073\ \text{N/m}$. Find the angle of contact.
- 2 Say whether each liquid wets the solid, and the shape of its meniscus in a tube: water–clean glass, mercury–glass, water–paraffin wax, kerosene–glass.
- 3 Find the excess pressure inside a mercury drop of radius $2.0\ \text{mm}$ ($S=0.465\ \text{N/m}$).
- 4 Find the excess pressure inside a soap bubble of radius $2.5\ \text{cm}$ ($S=0.025\ \text{N/m}$).
- 5 Find the excess pressure inside an air bubble of radius $0.20\ \text{mm}$ just below the surface of water.
- 6 The bubble of part 5 is $1.5\ \text{m}$ below the surface. Find the total pressure inside it.
- 7 Find the radius of a soap bubble ($S=0.030\ \text{N/m}$) whose excess pressure is $12\ \text{Pa}$.
- 8 Explain why hot soapy water washes greasy clothes better than cold plain water.
- 9 As a soap bubble is blown bigger, does the pressure inside it rise or fall? Why is the first breath into a new balloon the hardest?
- 1 Find the height to which water rises in a clean glass capillary of radius $0.40\ \text{mm}$.
- 2 What bore radius is needed for water to rise $10\ \text{cm}$?
- 3 Find the depression of mercury ($S=0.465\ \text{N/m}$, $\theta=140^\circ$, density $13.6\times10^3\ \text{kg/m}^3$) in a glass tube of radius $1.0\ \text{mm}$, in mm.
- 4 A liquid of density $800\ \text{kg/m}^3$ that wets glass ($\theta=0^\circ$) rises $2.5\ \text{cm}$ in a tube of radius $0.30\ \text{mm}$. Find its surface tension.
- 5 Water would rise $8.0\ \text{cm}$ in a certain tube, but only $5.0\ \text{cm}$ of the tube is above the surface. Describe what happens and find the angle the water surface makes with the glass at the rim.
- 6 The tube of part 1 is inclined at $45^\circ$ to the vertical. Find the length of the water column in it.
- 7 How high would water rise in the tube of part 1 in a laboratory on the Moon ($g_\text{Moon}=g/6$)?
- 8 (Experiment) In a tube of radius $0.30\ \text{mm}$ tap water rises $4.8\ \text{cm}$; after a few drops of detergent are added it rises only $2.1\ \text{cm}$. Find the surface tension in each case and comment.
- 1 Two soap bubbles of radii $4.0\ \text{cm}$ and $6.0\ \text{cm}$ stick together. Find the radius of curvature of their common film.
- 2 Find the work done in slowly enlarging a soap bubble from radius $1.0\ \text{cm}$ to $3.0\ \text{cm}$ ($S=0.030\ \text{N/m}$), ignoring the work done against the atmosphere.
- 3 Two clean, parallel vertical glass plates $0.50\ \text{mm}$ apart dip into water. Using a force balance on the water between them, find how high it rises.
- 4 Air is blown slowly through a fine tube whose open end, of radius $0.10\ \text{mm}$, is $5.0\ \text{cm}$ below the surface of water. Find the least gauge pressure in the tube that will form a bubble there.
- 5 Water droplets of radius $0.010\ \text{mm}$ merge to form a drop of radius $1.0\ \text{mm}$. Find the rise in temperature if all the energy released heats the water ($c=4200\ \text{J kg}^{-1}\text{K}^{-1}$).
- 6 A thin water film $0.050\ \text{mm}$ thick lies between two flat glass plates, each $10\ \text{cm}\times10\ \text{cm}$. The water wets the glass and its edges form semicircular (cylindrical) surfaces. Find the force needed to pull the plates straight apart.
- 7 Find the mass of water held up in a clean glass capillary of radius $0.50\ \text{mm}$, in mg.
E1. NEET · MCQ The excess pressure inside one soap bubble is three times the excess pressure inside a second soap bubble blown from the same solution. The ratio of the volume of the first bubble to that of the second is (A) $1:3$ (B) $1:9$ (C) $1:27$ (D) $27:1$
E2. NEET · MCQ Statement I: A small drop of liquid falling freely (so that gravity does not distort it) takes a spherical shape. Statement II: For a given volume a sphere has the least surface area, and the surface energy of a liquid is proportional to its surface area. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct
E3. NEET · MCQ Assertion (A): In a capillary tube of smaller bore, water rises to a greater height. Reason (R): The weight of the water column held up in a capillary tube does not depend on the radius of the tube. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E4. NEET · MCQ A liquid has surface tension $S$ and density $\rho$. Match each quantity in List-I with its expression in List-II ($R$ is a radius, $p_0$ the atmospheric pressure).
List-I: (a) excess pressure inside a drop of the liquid (b) excess pressure inside a soap bubble (c) work done to blow a soap bubble of radius $R$ (d) pressure inside an air bubble of radius $R$ at depth $h$ in the liquid
List-II: (i) $8\pi R^2S$ (ii) $\dfrac{4S}{R}$ (iii) $p_0+\rho gh+\dfrac{2S}{R}$ (iv) $\dfrac{2S}{R}$
Choose the correct answer: (A) a-ii, b-iv, c-i, d-iii (B) a-iv, b-ii, c-iii, d-i (C) a-iv, b-i, c-ii, d-iii (D) a-iv, b-ii, c-i, d-iii
E5. NEET · MCQ The graph shows the capillary rise $h$ against $1/r$ for two liquids P and Q in clean glass tubes of different radii $r$; both liquids wet glass completely ($\theta=0^\circ$). Liquid P has surface tension $0.075\ \text{N/m}$ and density $1000\ \text{kg/m}^3$; liquid Q has density $800\ \text{kg/m}^3$. The surface tension of Q is (A) $0.0375\ \text{N/m}$ (B) $0.030\ \text{N/m}$ (C) $0.047\ \text{N/m}$ (D) $0.060\ \text{N/m}$
E6. NEET · MCQ How many of the following statements are correct?
(i) The SI unit of surface tension, N/m, is also the unit of the force constant of a spring.
(ii) The angle of contact between mercury and clean glass is obtuse.
(iii) Surface energy per unit area has the dimensions $[\mathrm{M\,T^{-2}}]$.
(iv) A capillary tube dipped in water inside a freely falling lift shows no rise at all.
(v) The excess pressure inside a liquid drop of radius $R$ equals that inside a soap bubble of radius $2R$ when the two liquids have the same surface tension.
(A) One (B) Two (C) Three (D) Four
Research question. How much does a household detergent lower the surface tension of water, and is there a concentration beyond which adding more makes no difference?
Why it matters. Surfactants — the molecules in detergents, shampoos and the fluid lining our lungs — are among the most widely used chemicals in the world. Doctors give artificial lung surfactant to premature babies whose lungs cannot yet make their own, because without it the tiny air sacs collapse (Law 7.20: small bubbles have large excess pressures). Agricultural sprays, inkjet inks, firefighting foams and oil-spill clean-ups are all designed around how strongly a surfactant lowers $S$. Capillary rise gives you a simple, accurate way to measure it.
What to do.
- Clean a glass capillary tube (or a few) thoroughly and find its internal radius — with a travelling microscope if you have one, or by drawing a measured length of water into it and weighing it ($m=\rho\pi r^2\ell$).
- Clamp the tube vertically in a beaker of distilled water and measure the capillary rise $h$ from the outside surface to the bottom of the meniscus. Compute $S=\rho grh/2$.
- Make detergent solutions of increasing strength: 1 drop, 2, 4, 8, 16 drops per litre. For each, rinse the tube with the solution and measure $h$.
- Plot $S$ against the number of drops per litre (also try a logarithmic scale). Where does the curve level off?
- Repeat the distilled-water measurement with warm water to see the effect of temperature.
Tools: Capillary tubes, beaker, clamp stand, ruler with mm scale or travelling microscope, magnifying glass, dropper, liquid detergent, thermometer.
Hand in: A table of $h$ and $S$ for each concentration with uncertainties, the graph of $S$ against concentration, and a paragraph explaining the shape of the curve in terms of detergent molecules at the surface.
Going further. Measure the rise in tubes of three different radii in plain water and plot $h$ against $1/r$. Is it a straight line through the origin, as Jurin's law predicts? Use its slope for a more accurate value of $S$.
🧪 Self-check quiz
Q1. Surface tension has the same dimensions as
Q2. Twenty-seven identical drops of water merge into one drop. The total surface energy of the large drop, compared with that of the 27 drops together, is
Q3. Mercury in a clean glass capillary tube stands below the level of the mercury outside because
Q4. Water rises to $4\ \text{cm}$ in a capillary tube $10\ \text{cm}$ long on the ground. The same tube and beaker are taken aboard a satellite orbiting the Earth, where everything is weightless. The water in the tube
Q5. The excess pressure inside a soap bubble of radius $1.0\ \text{cm}$ blown from a solution of surface tension $0.030\ \text{N/m}$ is