5.2 Torque, Angular Momentum and Equilibrium
A force turns a body about a point by its torque $\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F}$; torque changes angular momentum, $\boldsymbol{\tau}=d\mathbf{L}/dt$. With no external torque $\mathbf{L}$ is conserved — why skaters spin faster — and a rigid body is in equilibrium only when both the net force and the net torque vanish.
Try to open a heavy door by pushing right next to its hinges: it barely moves. Push the same amount at the handle, and it swings open easily. Push at the handle but straight towards the hinges, and nothing happens at all. What turns the door is not the force alone but the force together with where and in which direction it is applied. The same idea explains why a spanner has a long handle, why a see-saw balances a light child far from the pivot against a heavy adult close to it, and why a ladder leaning on a wall can suddenly slide out at the foot when you climb too high.
In Section 5.1 we saw that the centre of mass of a body moves as if all the external forces acted there. But a rigid body can also rotate: a wheel spins, a door swings, a thrown hammer tumbles. A rigid body's motion is, in general, a translation of its centre of mass combined with a rotation about an axis; when one axis is held fixed (a door's hinges, a wheel's axle) the body can only rotate, every particle moving on a circle about that axis with the same angular velocity $\omega$ (see Section 2.4). In this section we build the rotational partners of force and momentum — torque and angular momentum — prove that torque changes angular momentum just as force changes momentum, use the conservation of angular momentum, and finish with the two conditions for a rigid body to stay in equilibrium. We use the vector product from Section 2.2 throughout. NEET questions on this section are short and frequent: a torque from $\mathbf{r}\times\mathbf{F}$, a skater or a roundabout whose spin changes, the dimensions of angular momentum, or the forces on the supports of a loaded beam.
Moment of a force: torque
Fix a reference point $O$ (often a pivot or a hinge). A force $\mathbf{F}$ acts at a point $P$ whose position vector from $O$ is $\mathbf{r}$. Experiments with levers and doors show that the turning effect grows in proportion to $F$, in proportion to the distance of the line of the force from $O$, and vanishes when the force points through $O$. All of this is captured by one vector product.
The torque (or moment) of a force $\mathbf{F}$ acting at a point with position vector $\mathbf{r}$ about the point $O$ is
$$\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F},$$ $$\tau=rF\sin\theta=F\,r_\perp=r\,F_\perp ,$$where $\theta$ is the angle between $\mathbf{r}$ and $\mathbf{F}$. Here $r_\perp=r\sin\theta$ is the moment arm (lever arm) — the perpendicular distance from $O$ to the line of action of the force — and $F_\perp=F\sin\theta$ is the component of the force perpendicular to $\mathbf{r}$. The direction of $\boldsymbol{\tau}$ is perpendicular to both $\mathbf{r}$ and $\mathbf{F}$, given by the right-hand rule. Unit: $\text{N m}$ (not written as joule); dimensions $[\text{ML}^2\text{T}^{-2}]$.
Three things to notice. (i) A force whose line of action passes through $O$ has zero moment arm and zero torque — like pushing a door towards its hinges. (ii) Sliding a force along its own line of action does not change its torque, because $r_\perp$ does not change. (iii) Torque depends on the reference point: always say "torque about $O$". In a plane problem every torque points along $\pm\hat{\mathbf{k}}$, so we can treat it as a signed number — positive for anticlockwise turning, negative for clockwise — and in components
$$\tau_z=xF_y-yF_x .$$In three dimensions expand the determinant:
$$\begin{aligned}\tau_x&=yF_z-zF_y,\\ \tau_y&=zF_x-xF_z,\\ \tau_z&=xF_y-yF_x .\end{aligned}$$Torque about an axis. For a body that can only turn about a fixed axis (say the $z$-axis through $O$), only the component of $\boldsymbol{\tau}$ along that axis, $\tau_z$, can turn it; the other components merely press on the bearings. A force parallel to the axis, or one cutting through the axis, has zero torque about it.
A couple of forces is a pair of equal and opposite forces, $\mathbf{F}$ and $-\mathbf{F}$, whose lines of action are parallel but separated by a perpendicular distance $d$. Its net force is zero, but its torque is
$$\tau=Fd,$$the same about every point. A couple produces pure rotation without translation — turning a tap, a steering wheel, or a compass needle in a uniform field.
Proof that a couple's torque does not depend on the point: let the forces act at $\mathbf{r}_1$ and $\mathbf{r}_2$. About any point, $\mathbf{r}_1\times\mathbf{F}+\mathbf{r}_2\times(-\mathbf{F})=(\mathbf{r}_1-\mathbf{r}_2)\times\mathbf{F}$, and $\mathbf{r}_1-\mathbf{r}_2$ is the same whatever origin you pick. More generally, whenever the net force is zero, the net torque is the same about every point — a fact we use for equilibrium.
A door handle is $0.80\ \text{m}$ from the hinge line. A horizontal force of $10\ \text{N}$ is applied at the handle at $30^\circ$ to the plane of the door. The torque about the hinge is
Angular momentum
Force changes linear momentum, $\mathbf{F}=d\mathbf{p}/dt$. The rotational partner of torque must be the "moment of momentum".
A particle of mass $m$ with momentum $\mathbf{p}=m\mathbf{v}$, at position $\mathbf{r}$ from a point $O$, has angular momentum about $O$
$$\mathbf{L}=\mathbf{r}\times\mathbf{p},\qquad L=rp\sin\theta=p\,r_\perp ,$$where $r_\perp$ is the perpendicular distance from $O$ to the line of the velocity. Unit $\text{kg m}^2/\text{s}$ ($=\text{J s}$); dimensions $[\text{ML}^2\text{T}^{-1}]$, the same as Planck's constant.
Two important special cases. (i) A particle on a circle of radius $r$ about $O$ at speed $v$: $\mathbf{r}\perp\mathbf{v}$, so $L=mvr=mr^2\omega$, along the axis by the right-hand rule. (ii) A particle moving in a straight line at constant velocity: $r_\perp$ is the fixed distance $d$ of the line from $O$, so $L=mvd$ is constant — non-zero, even though the particle is not "going round" anything — and it is zero only about points on the line itself.
Rigid body about a fixed axis. Every particle of a rigid body rotating about a fixed axis with angular velocity $\omega$ moves on a circle of radius $r_i$ about the axis, so its angular momentum along the axis is $m_ir_i^2\omega$. Adding up,
$$L=\Big(\sum m_ir_i^2\Big)\omega=I\omega ,$$where $I=\sum m_ir_i^2$ is the moment of inertia about the axis — the subject of Section 5.3. For now, $I$ simply measures how much mass there is and how far from the axis it sits: moving mass outwards increases $I$.
Torque changes angular momentum. Differentiate $\mathbf{L}=\mathbf{r}\times\mathbf{p}$ using the product rule (keeping the order in the cross products):
$$\begin{aligned}\frac{d\mathbf{L}}{dt}&=\frac{d\mathbf{r}}{dt}\times\mathbf{p}+\mathbf{r}\times\frac{d\mathbf{p}}{dt}\\ &=\mathbf{v}\times m\mathbf{v}+\mathbf{r}\times\mathbf{F}=\boldsymbol{\tau},\end{aligned}$$since $\mathbf{v}\times\mathbf{v}=\mathbf{0}$. For a system of particles, add the equations: internal forces come in equal and opposite pairs along the line joining the two particles, so their torques cancel in pairs as well. Only external torques remain.
For a particle, and for any system of particles with total angular momentum $\mathbf{L}$ about a fixed point $O$ (or about the centre of mass),
$$\boldsymbol{\tau}_\text{ext}=\frac{d\mathbf{L}}{dt},$$where $\boldsymbol{\tau}_\text{ext}$ is the total torque of the external forces about the same point. (This assumes internal forces act along the lines joining the particles, as gravitational, electric and contact forces do.) For rotation about a fixed axis, $\tau_\text{ext}=\dfrac{d(I\omega)}{dt}$; and a torque acting for a time changes the angular momentum by the angular impulse $\int\boldsymbol{\tau}\,dt=\Delta\mathbf{L}$.
A particle moves at constant velocity along the straight line $y=3\ \text{m}$ in the $xy$-plane. Its angular momentum about the origin
Conservation of angular momentum and its applications
If the net external torque on a system is zero, Law 5.6 says $d\mathbf{L}/dt=\mathbf{0}$.
If the total external torque on a system about a point (or an axis) is zero, the total angular momentum of the system about that point (or axis) stays constant:
$$\boldsymbol{\tau}_\text{ext}=\mathbf{0}\ \Rightarrow\ \mathbf{L}=\text{constant}.$$For a body or system rotating about a fixed axis whose moment of inertia changes because its parts move: $I_1\omega_1=I_2\omega_2$. Kinetic energy is not conserved in general: $K=\tfrac12I\omega^2=\dfrac{L^2}{2I}$, so it rises when $I$ falls and vice versa.
Applications.
- Spinning skaters, dancers and divers. Pulling the arms in or curling into a tuck reduces $I$, so $\omega$ rises; stretching out slows the spin before landing. The extra kinetic energy comes from the work done by the muscles pulling the arms inward.
- A person on a turntable. Walking towards the centre of a freely rotating platform reduces $I$ and speeds it up; walking out slows it.
- Coupling two spinning bodies. A disc dropped onto a coaxial spinning turntable: friction between them is internal, so $I_1\omega_1+I_2\omega_2=(I_1+I_2)\omega$ — and kinetic energy is lost as heat, like a perfectly inelastic collision.
- Central forces and orbits. The Sun's gravity on a planet points along $\mathbf{r}$, so its torque about the Sun is zero and the planet's $L=mvr_\perp$ is constant. At the nearest and farthest points the velocity is perpendicular to $\mathbf{r}$, so $v_\text{near}r_\text{near}=v_\text{far}r_\text{far}$: planets and comets move fastest near the Sun. This is Kepler's law of areas (Chapter 6).
- Helicopters and collapsing stars. A helicopter's tail rotor provides the external torque that stops the body spinning opposite to the main rotor; a star that collapses to a neutron star shrinks its radius enormously and spins up to hundreds of turns per second.
In the widget the spinner turns at $1.0\ \text{rev/s}$ with the two masses at $r=0.80\ \text{m}$. If the masses are pulled in to $r=0.20\ \text{m}$, how fast will it spin?
A disc spinning at $\omega$ about its axis has an identical, non-rotating disc placed gently on it, coaxially. When they turn together, the fraction of the original kinetic energy that has been lost is
Equilibrium of rigid bodies
A particle is in equilibrium when the net force on it is zero (Section 3.1). A rigid body needs more: two equal and opposite forces that are not in line — a couple — have zero net force, yet they set the body spinning. Equilibrium of a rigid body therefore has two parts, one for each kind of motion.
A rigid body is in (mechanical) equilibrium — its centre of mass has no acceleration and its angular momentum does not change — if and only if
$$\text{(1) translational: }\ \sum\mathbf{F}_\text{ext}=\mathbf{0},\qquad\text{(2) rotational: }\ \sum\boldsymbol{\tau}_\text{ext}=\mathbf{0}\ \text{about any one point}.$$When (1) holds, the net torque is the same about every point, so (2) may be checked about whichever point is most convenient. A body at rest that satisfies both stays at rest (static equilibrium). For forces in a plane this gives three scalar equations: $\sum F_x=0$, $\sum F_y=0$, $\sum\tau_z=0$.
Weight acts at the centre of gravity. In a uniform field the weights of all the particles have the same total torque as the single force $M\mathbf{g}$ acting at the centre of mass (Definition 5.3 in Section 5.1). So a uniform beam's weight acts at its middle.
The principle of moments. For a lever or a beam balanced on a pivot, condition (2) about the pivot reads: sum of anticlockwise moments = sum of clockwise moments. This is how a metre rule balanced on a knife-edge can be used to find an unknown mass (one of the experiments of Unit 20, Experimental Skills): hang the unknown mass on one side and a known mass on the other, move them until the rule balances, and equate moments — remembering the rule's own weight acting at its $50\ \text{cm}$ mark if the knife-edge is elsewhere.
If a rigid body is in equilibrium under exactly three non-parallel forces, their lines of action pass through a single point (they are concurrent), and the forces form a closed triangle — so Lami's theorem of Section 3.1 applies. (Take torques about the meeting point of two of them: the third must have zero torque there too.)
- Draw the body and every external force at its point of action: weight at the centre of gravity, normal forces perpendicular to smooth surfaces, friction along rough ones, tensions along strings, and a hinge force (two unknown components) at a hinge.
- Write $\sum F_x=0$ and $\sum F_y=0$.
- Take torques about the point where the most unknown forces act — they drop out of the torque equation. Use $\tau=F\,r_\perp$ with a sign for clockwise/anticlockwise.
- Solve; if a normal force or tension comes out negative, the assumed contact has been lost — the body tips or the string goes slack.
- For friction: check $f\le\mu_sN$ at the end. On the point of slipping or tipping, set $f=\mu_sN$ or the vanishing normal force to zero.
In the widget set the ladder at $60^\circ$ to the floor and $\mu_s=0.30$, then press Play to send the $60\ \text{kg}$ climber up the $15\ \text{kg}$, $5.0\ \text{m}$ ladder. What happens?
(b) A $30\ \text{kg}$ child stands at the centre of a playground roundabout ($I=120\ \text{kg m}^2$ about its axle) that turns freely at $1.0\ \text{rad/s}$. She walks out to the rim, $2.0\ \text{m}$ from the axle. The new angular velocity is (A) $1.0\ \text{rad/s}$ (B) $2.0\ \text{rad/s}$ (C) $0.50\ \text{rad/s}$ (D) $0.25\ \text{rad/s}$.
1. Distance instead of moment arm. $\tau=rF\sin\theta$, with $\theta$ the angle between $\mathbf{r}$ and $\mathbf{F}$: use the perpendicular distance to the line of action. A force through the pivot, or parallel to the axis, has no torque about it.
2. The order of the cross product. $\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F}$ and $\mathbf{L}=\mathbf{r}\times\mathbf{p}$; $\mathbf{F}\times\mathbf{r}$ gives the negative, and NEET offers both. Use $\boldsymbol{\tau}\cdot\mathbf{F}=0$ and $\boldsymbol{\tau}\cdot\mathbf{r}=0$ to strike out impossible options, then fix the sign with one component (Example 7).
3. Units and dimensions. Torque has the dimensions of work, $[\text{ML}^2\text{T}^{-2}]$, but its unit is written $\text{N m}$, never joule. Angular momentum, $[\text{ML}^2\text{T}^{-1}]$, has the unit $\text{J s}$ of Planck's constant, and an angular impulse $\tau\,\Delta t$ has the same unit as angular momentum.
4. "Angular momentum is conserved, so kinetic energy is conserved." No: $K=L^2/2I$. A skater pulling her arms in gains energy (muscle work); two discs brought to a common spin lose the fraction $\dfrac{I_2}{I_1+I_2}$ (friction heat). Only $I\omega$ is fixed.
5. Checking only $\sum\mathbf{F}=\mathbf{0}$. A couple has zero net force but turns the body: a rigid body in equilibrium needs $\sum\boldsymbol{\tau}=\mathbf{0}$ as well. For a beam on two supports, take moments about one support to find the other — and remember the beam's own weight at its centre of gravity.
6. Angular momentum without a circle. A particle moving in a straight line has $L=mvd$ about a point at distance $d$ from its line — constant and non-zero; it is zero only about points on the line itself.
A uniform rod of mass $2.0\ \text{kg}$ and length $1.0\ \text{m}$ rests horizontally on supports at its two ends. A $3.0\ \text{kg}$ mass hangs $25\ \text{cm}$ from the left end ($g=10\ \text{m/s}^2$). The force of the left support is
Exercises
Take $g=9.8\ \text{m/s}^2$ unless told otherwise. Anticlockwise torques are positive.
- 1 A $50\ \text{N}$ force acts perpendicular to a spanner $0.30\ \text{m}$ from the bolt. Find the torque.
- 2 A $40\ \text{N}$ force acts at the end of a $0.50\ \text{m}$ spanner at $30^\circ$ to the spanner. Find the torque.
- 3 Find $\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F}$ and its magnitude for $\mathbf{r}=2\,\hat{\mathbf{i}}\ \text{m}$ and $\mathbf{F}=(3\,\hat{\mathbf{j}}+4\,\hat{\mathbf{k}})\ \text{N}$.
- 4 A force $\mathbf{F}=(2\,\hat{\mathbf{i}}-\hat{\mathbf{j}})\ \text{N}$ acts at $(3,4)\ \text{m}$. Find its torque about the origin. Is it clockwise or anticlockwise?
- 5 A light rod $1.0\ \text{m}$ long, hinged at its left end O, is horizontal. A $20\ \text{N}$ force acts upward at the right end; a $30\ \text{N}$ force acts downward at $0.50\ \text{m}$ from O at $30^\circ$ to the rod; a $10\ \text{N}$ load hangs from the middle. Find the net torque about O.
- 6 Two opposite $25\ \text{N}$ forces act along parallel lines $0.12\ \text{m}$ apart. Find the torque of this couple, and explain why it is the same about any point.
- 7 A force $\mathbf{F}=(4\,\hat{\mathbf{i}}+3\,\hat{\mathbf{j}})\ \text{N}$ acts at $(1,2)\ \text{m}$. Use the torque about the origin to find the perpendicular distance of its line of action from the origin.
- 8 A wheel of radius $0.40\ \text{m}$ has a $30\ \text{N}$ force applied tangentially at its rim and a $50\ \text{N}$ force applied radially at the rim. Find the torque about the axle.
- 1 A $0.50\ \text{kg}$ particle moves on a circle of radius $2.0\ \text{m}$ at $3.0\ \text{m/s}$. Find its angular momentum about the centre.
- 2 A $2.0\ \text{kg}$ particle moves at $5.0\ \text{m/s}$ in the $+x$ direction along the line $y=4.0\ \text{m}$. Find its angular momentum about the origin. Does it change with time?
- 3 A particle at $\mathbf{r}=(\hat{\mathbf{i}}+2\,\hat{\mathbf{j}})\ \text{m}$ has momentum $\mathbf{p}=(3\,\hat{\mathbf{i}}-\hat{\mathbf{j}})\ \text{kg m/s}$. Find $L_z$ about the origin.
- 4 Estimate the orbital angular momentum of the Earth ($5.97\times10^{24}\ \text{kg}$) about the Sun, treating the orbit as a circle of radius $1.50\times10^{11}\ \text{m}$ traversed in $3.16\times10^7\ \text{s}$.
- 5 A constant torque of $4.0\ \text{N m}$ acts on a wheel at rest for $3.0\ \text{s}$. Find its final angular momentum.
- 6 The angular momentum of a body is $L=(2t^2+3)\ \text{kg m}^2/\text{s}$. Find the torque on it at $t=2.0\ \text{s}$.
- 7 A $0.50\ \text{kg}$ stone is thrown from the origin at $30\ \text{m/s}$, $53^\circ$ above the horizontal ($\sin53^\circ=0.8$, $g=10\ \text{m/s}^2$). Find the magnitude of its angular momentum about the origin just before it lands.
- 8 A $0.10\ \text{kg}$ ball is dropped from rest at the point $(3.0,\,10)\ \text{m}$. Find its angular momentum about the origin $1.0\ \text{s}$ later.
- 1 A disc ($I=0.20\ \text{kg m}^2$) spins freely at $30\ \text{rad/s}$. A ring ($I=0.10\ \text{kg m}^2$) at rest is dropped on it coaxially. Find the final angular velocity and the kinetic energy lost.
- 2 A diver's moment of inertia falls from $4.0$ to $1.6\ \text{kg m}^2$ as she tucks. If she was turning at $2.0\ \text{rev/s}$, find her new rate.
- 3 A merry-go-round ($I=240\ \text{kg m}^2$, radius $2.0\ \text{m}$) turns freely at $1.0\ \text{rad/s}$ with a $60\ \text{kg}$ child at its rim. The child walks to the centre. Find the new angular velocity.
- 4 A comet moves at $54\ \text{km/s}$ at its closest approach to the Sun, $0.60\ \text{AU}$. How fast does it move at its farthest point, $18\ \text{AU}$ away?
- 5 An insect of mass $20\ \text{g}$ is at the centre of a disc ($I=1.0\times10^{-3}\ \text{kg m}^2$) spinning freely at $10\ \text{rad/s}$. It crawls out to $0.10\ \text{m}$ from the axis. Find the new angular velocity.
- 6 Explain why a single-rotor helicopter needs a small rotor on its tail.
- 7 A star of radius $7.0\times10^5\ \text{km}$ turns once in $30$ days. It collapses into a uniform sphere of radius $10\ \text{km}$ ($I\propto R^2$ for the same mass and shape). Find the new rotation period, in milliseconds.
- 8 A door ($I=12\ \text{kg m}^2$ about its hinges, width $1.0\ \text{m}$) is at rest. A $10\ \text{g}$ bullet moving at $400\ \text{m/s}$ perpendicular to the door strikes its outer edge and stays in it. Find the door's angular velocity.
- 1 A uniform metre rule balances at its $50\ \text{cm}$ mark. A $40\ \text{g}$ mass hangs at the $20\ \text{cm}$ mark. Where must a $60\ \text{g}$ mass hang to restore balance?
- 2 A metre rule balances on a knife-edge at its $40\ \text{cm}$ mark when a $50\ \text{g}$ mass hangs at its $10\ \text{cm}$ mark. Find the mass of the rule.
- 3 A uniform $6.0\ \text{m}$, $50\ \text{kg}$ beam rests on supports at its ends. An $80\ \text{kg}$ man stands $2.0\ \text{m}$ from the left end. Find the two support forces.
- 4 A uniform $2.0\ \text{m}$, $10\ \text{kg}$ rod is hinged to a wall at one end and held horizontal by a string from its other end to a point on the wall above the hinge; the string makes $30^\circ$ with the rod. Find the tension and the force of the hinge.
- 5 A uniform $12\ \text{kg}$ ladder rests against a smooth wall at $60^\circ$ to the floor. Find the friction force at the floor and the least coefficient of friction.
- 6 A $20\ \text{kg}$ cubical box of side $0.40\ \text{m}$ stands on a floor with $\mu_s=0.60$. It is pushed horizontally at its top edge. Does it slide or tip first? Find the push that starts the motion.
- 7 A wheel of radius $0.50\ \text{m}$ and weight $400\ \text{N}$ rests against a step $0.20\ \text{m}$ high. Find the least horizontal force applied at the axle that will just lift it over the step.
- 8 Two people carry a uniform $3.0\ \text{m}$, $30\ \text{kg}$ pole on their shoulders, one at each end. A $20\ \text{kg}$ load hangs $1.0\ \text{m}$ from end A. Find the force on each shoulder.
E1. NEET · MCQ A force $\mathbf{F}=(3\,\hat{\mathbf{i}}+4\,\hat{\mathbf{j}})\ \text{N}$ acts at the point $(2\ \text{m},\,1\ \text{m},\,0)$. Its torque about the origin is (A) $5\,\hat{\mathbf{k}}\ \text{N m}$ (B) $-5\,\hat{\mathbf{k}}\ \text{N m}$ (C) $11\,\hat{\mathbf{k}}\ \text{N m}$ (D) $-11\,\hat{\mathbf{k}}\ \text{N m}$
E2. NEET · MCQ Assertion (A): A skater spinning on frictionless ice spins faster when she pulls her arms in. Reason (R): Pulling the arms in reduces her moment of inertia, while her rotational kinetic energy stays constant. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true
E3. NEET · MCQ Match List-I with List-II.
List-I: (a) torque (b) angular momentum (c) moment of inertia (d) angular acceleration
List-II: (i) $[\text{ML}^2\text{T}^{-1}]$ (ii) $[\text{ML}^2]$ (iii) $[\text{T}^{-2}]$ (iv) $[\text{ML}^2\text{T}^{-2}]$
Choose the correct answer: (A) a-i, b-iv, c-ii, d-iii (B) a-iv, b-ii, c-i, d-iii (C) a-iv, b-i, c-iii, d-ii (D) a-iv, b-i, c-ii, d-iii
E4. NEET · MCQ Statement I: A particle moving with constant velocity along a straight line has zero angular momentum about every point. Statement II: If the net external force on a rigid body is zero, the net external torque on it is also zero. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct
E5. NEET · MCQ The figure shows a uniform metre scale of mass $120\ \text{g}$ (marks in cm) balanced horizontally on a knife-edge at the $40\ \text{cm}$ mark, with an unknown mass $m$ hanging at the $10\ \text{cm}$ mark. The value of $m$ is (A) $360\ \text{g}$ (B) $40\ \text{g}$ (C) $120\ \text{g}$ (D) $30\ \text{g}$
E6. NEET · MCQ How many of the following statements are correct?
(i) The torque of a couple is the same about every point.
(ii) The angular momentum of a planet about the Sun is conserved because the Sun's gravitational force on it has zero torque about the Sun.
(iii) When two discs turning about a common axis are pressed together and reach a common angular velocity, their total kinetic energy is conserved.
(iv) Torque and work have the same dimensions, so the unit of torque, $\text{N m}$, may be written as joule.
(v) A rigid body is in equilibrium only if both the net external force and the net external torque on it are zero.
(A) Two (B) Four (C) Five (D) Three
Research question. How accurately can the principle of moments measure an unknown mass with nothing more than a metre rule, a knife-edge and one known mass — and which error dominates?
Why it matters. Steelyard balances, crane load indicators, aircraft weight-and-balance checks and the torque wrenches used on car wheels and wind-turbine bolts all rely on balancing moments. Engineers who certify cranes must know how a small error in a lever arm grows into an error in the load — exactly the propagation of errors you learned in Chapter 1.
What to do.
- Balance a metre rule on a knife-edge (a triangular prism or the edge of a ruler) and record the balance point $G$; it should be near $50\ \text{cm}$.
- Hang a known mass (say a $100\ \text{g}$ slotted mass or a full $200\ \text{mL}$ water packet) on one side and the unknown object on the other, with thread loops. Slide them until the rule balances; record both distances from the knife-edge.
- Compute the unknown mass from $m_1d_1=m_2d_2$. Repeat for five different positions of the known mass.
- Now move the knife-edge to $30\ \text{cm}$ and repeat, this time including the rule's own weight at $G$ in the moment equation. Find the mass of the rule itself as a by-product.
- Estimate the uncertainty: how far can you move a mass before you can see the rule tilt? Propagate that $\Delta d$ into $\Delta m$.
Tools: Metre rule, knife-edge or prism, thread, one known mass, objects to weigh, a kitchen scale for a final check.
Hand in: A results table, a plot of $d_2$ against $d_1$ (a straight line through the origin with slope $m_1/m_2$), your mass with its percentage uncertainty, and a comparison with the kitchen scale.
Going further. Use the slope of the $d_2$–$d_1$ graph instead of single readings. Does it reduce the scatter? Why does placing the masses far from the knife-edge give a smaller percentage error?
🧪 Self-check quiz
Q1. The torque of a couple of forces
Q2. A constant torque of $4.0\ \text{N m}$ acts on a wheel for $3.0\ \text{s}$. The change in its angular momentum is
Q3. Angular momentum has the same dimensions as
Q4. A skater spinning freely on ice pulls her arms in so that her moment of inertia becomes one third of its earlier value. Her rotational kinetic energy
Q5. A planet moves fastest when it is nearest the Sun. The best explanation is