Chapter 4 · Work, Energy, and Power

4.1 Work and the Work–Energy Theorem

Work is force times the displacement along the force — $W=\mathbf{F}\cdot\mathbf{d}$, or the area under the $F$–$x$ graph when the force varies — and the net work done on a body is exactly its change in kinetic energy.

A crane hauls a steel beam up a building site, a bowler's arm whips a cricket ball to $40\ \text{m/s}$, a car's brakes bring it to rest in a few tens of metres, and a bullet buries itself a few centimetres into a block of wood. Newton's second law can describe every one of these, but only if you know how the force changes from instant to instant — and often you do not. What you usually know is how the force depends on position, and over what distance it acts.

This section introduces the quantity that turns "force over a distance" into a single number: work. Then it proves the most useful result in mechanics after Newton's laws themselves — the work–energy theorem — which says that the total work done on a body equals the change in its kinetic energy. With it you can find a speed or a stopping distance without ever computing an acceleration or a time. We use the free-body diagrams of Section 3.2 and the friction laws of Section 3.3 throughout; the next section, 4.2, builds potential energy and conservation of energy on top of this one.

Work done by a constant force

In everyday speech, holding a heavy bag for ten minutes is hard work. In physics it is no work at all: the bag does not move. Physics reserves the word for a force that acts while its point of application moves, and it counts only the part of the motion along the force. Push a lawnmower by its slanting handle: only the horizontal component of your push helps it along the lawn; the vertical component just presses it into the grass.

📘 Definition 4.1 — Work done by a constant force

If a constant force $\mathbf{F}$ acts on a body while its point of application undergoes a displacement $\mathbf{d}$, the work done by the force is the scalar product

$$W=\mathbf{F}\cdot\mathbf{d}=Fd\cos\theta ,$$

where $\theta$ is the angle between $\mathbf{F}$ and $\mathbf{d}$. In components, $W=F_x\,\Delta x+F_y\,\Delta y+F_z\,\Delta z$. Work is a scalar; its SI unit is the joule, $1\ \text{J}=1\ \text{N m}=1\ \text{kg m}^2\text{s}^{-2}$, and its dimensional formula is $[\text{ML}^2\text{T}^{-2}]$.

Read $Fd\cos\theta$ in either of two ways: (force) × (component of the displacement along the force), or (component of the force along the displacement) × (distance moved). Both give the same number. The sign of the work depends only on the angle:

Work is always done by a particular force on a particular body. Always say which: "the work done by friction on the block" is a definite number; "the work done" on its own is not.

Work by gravity. Near the Earth, gravity is the constant force $m\mathbf{g}$ pointing down. If a body moves from height $h_1$ to height $h_2$ by any straight displacement, only the vertical component of the displacement counts, so

$$W_\text{grav}=-mg\,(h_2-h_1).$$

Sliding a block a distance $L$ down a slope of angle $\alpha$ gives $W_\text{grav}=(mg\sin\alpha)L=mg\,(L\sin\alpha)=mgh$, where $h$ is the drop in height — exactly what a vertical drop of $h$ would give. (In Section 4.2 we show that this holds for every path, curved or not.)

📐 Result 4.1 — Net work

When several forces $\mathbf{F}_1,\mathbf{F}_2,\dots$ act on a body that moves as a whole through a displacement $\mathbf{d}$, the total (net) work done on it is the sum of the works done by the individual forces, and equals the work done by the resultant force:

$$W_\text{net}=W_1+W_2+\cdots=(\mathbf{F}_1+\mathbf{F}_2+\cdots)\cdot\mathbf{d}=\mathbf{F}_\text{net}\cdot\mathbf{d}.$$

The two ways of computing $W_\text{net}$ are a good check on each other. Note also that work depends on the frame of reference, because displacement does: a passenger sitting in a moving train does no work against the seat in the train's frame, but in the ground frame the seat's forward friction (while the train accelerates) does positive work on him. Unless told otherwise, use the ground frame.

✏️ Example 1 — Dragging a trunk
A $40\ \text{kg}$ trunk is dragged $5.0\ \text{m}$ along a level floor by a rope inclined at $37^\circ$ above the horizontal ($\sin37^\circ=0.6$, $\cos37^\circ=0.8$). The tension in the rope is $160\ \text{N}$ and $\mu_k=0.25$. Find the work done on the trunk by (a) the tension, (b) friction, (c) gravity and the normal force, and (d) all the forces together. Check (d) using the resultant force.
Forces Vertically there is no acceleration: $N+T\sin37^\circ=mg$, so $N=392-160\times0.6=296\ \text{N}$ (not $392\ \text{N}$ — the rope lifts a little). Friction $f_k=\mu_kN=0.25\times296=74\ \text{N}$, backward.
(a) $W_T=Td\cos37^\circ=160\times5.0\times0.8=640\ \text{J}$.
(b) Friction is opposite to the motion ($\theta=180^\circ$): $W_f=-f_kd=-74\times5.0=-370\ \text{J}$.
(c) Both are vertical, perpendicular to the horizontal displacement: $W_\text{grav}=W_N=0$.
(d) $W_\text{net}=640-370+0+0=270\ \text{J}$.
Check Resultant force: horizontal $160\times0.8-74=54\ \text{N}$, vertical $0$. $W_\text{net}=54\times5.0=270\ \text{J}$ ✓.
✏️ Example 2 — Work from vectors
A constant force $\mathbf{F}=(3\hat{\mathbf{i}}-2\hat{\mathbf{j}}+4\hat{\mathbf{k}})\ \text{N}$ acts on a particle that moves from the point $(1,\,2,\,-1)\ \text{m}$ to the point $(4,\,-1,\,3)\ \text{m}$. Find (a) the work done by the force, (b) the angle between the force and the displacement. (c) Would the answer to (a) change if the particle went along a curved path between the same points?
Displacement $\mathbf{d}=\mathbf{r}_2-\mathbf{r}_1=(3\hat{\mathbf{i}}-3\hat{\mathbf{j}}+4\hat{\mathbf{k}})\ \text{m}$.
(a) $W=\mathbf{F}\cdot\mathbf{d}=3(3)+(-2)(-3)+4(4)=9+6+16=31\ \text{J}$.
(b) $|\mathbf{F}|=\sqrt{29}=5.39\ \text{N}$, $|\mathbf{d}|=\sqrt{34}=5.83\ \text{m}$; $\cos\theta=\dfrac{31}{5.385\times5.831}=0.987$, so $\theta=9.2^\circ$.
(c) No. For a constant force, split any path into small steps $d\mathbf{r}$: $\sum\mathbf{F}\cdot d\mathbf{r}=\mathbf{F}\cdot\sum d\mathbf{r}=\mathbf{F}\cdot\mathbf{d}$. Only the end points matter.

A porter carries a $20\ \text{kg}$ suitcase on his head and walks $30\ \text{m}$ along a level platform at constant speed. The work done by the porter's head on the suitcase is

Work done by a variable force

Many forces change as a body moves: a spring pulls harder the further you stretch it, the push of the gases on a piston falls as they expand, and a rubber catapult's pull dies away as the stone flies off. If the force changes with position, we cannot use $Fd$ directly. Instead, cut the motion along the $x$-axis into many small steps $\Delta x$. Over each step the force is nearly constant, so the work in that step is $F(x)\,\Delta x$ — the area of a thin strip under the graph of $F$ against $x$. Adding the strips and letting $\Delta x\to0$ gives an integral.

📐 Result 4.2 — Work done by a variable force

For a force $F(x)$ along the $x$-axis acting on a body that moves from $x_1$ to $x_2$,

$$W=\int_{x_1}^{x_2}F(x)\,dx=\text{(signed) area under the } F\text{–}x \text{ graph from } x_1 \text{ to } x_2 .$$

Area above the $x$-axis counts as positive work, area below as negative (for motion in the $+x$ direction). For a force that varies in three dimensions along a path $C$,

$$W=\int_C\mathbf{F}\cdot d\mathbf{r}=\int_C\left(F_x\,dx+F_y\,dy+F_z\,dz\right).$$

For a constant force the area is a rectangle, $F\,(x_2-x_1)$, and we are back to Definition 4.1. When each component depends only on its own coordinate ($F_x$ on $x$, $F_y$ on $y$, …), the three integrals can be done separately and the path does not matter — the commonest case in NEET problems.

The spring force. The most important variable force in this chapter is the push or pull of a spring. Fix one end of a light spring and pull the other end out a distance $x$ from its natural (relaxed) length: for small $x$, the spring pulls back with a force proportional to $x$.

📘 Definition 4.2 — Ideal spring and spring constant

An ideal spring is massless and obeys Hooke's law: when its free end is displaced by $x$ from the natural length (stretched for $x\gt0$, compressed for $x\lt0$), it exerts the restoring force

$$F_s=-kx .$$

The positive constant $k$ is the spring constant (or force constant), measured in $\text{N/m}$; a stiff spring has a large $k$. The minus sign says the force always points back towards the natural length.

The graph of $F_s$ against $x$ is a straight line through the origin with slope $-k$, so the work it does is a triangle-shaped area:

📐 Result 4.3 — Work done by a spring

When the end of an ideal spring moves from extension $x_1$ to extension $x_2$, the spring force does work

$$W_s=\int_{x_1}^{x_2}(-kx)\,dx=-\tfrac12k\left(x_2^2-x_1^2\right).$$

Stretching or compressing a spring from its natural length ($x_1=0$) by $x$: $W_s=-\tfrac12kx^2$, the same for both. An agent who does this slowly (no gain in speed) must apply $+kx$ and does work $+\tfrac12k\left(x_2^2-x_1^2\right)$.

The squares matter. Stretching a spring from $0$ to $5\ \text{cm}$ costs some work; stretching it a further $5\ \text{cm}$, from $5$ to $10\ \text{cm}$, costs three times as much, because the force is larger all the way along the second step.

✏️ Example 3 — Work as the area under a graph
A force along the $x$-axis acts on a body moving in the $+x$ direction. It rises uniformly from $0$ to $10\ \text{N}$ between $x=0$ and $x=2\ \text{m}$, stays at $10\ \text{N}$ until $x=5\ \text{m}$, and then falls uniformly to $-5\ \text{N}$ at $x=8\ \text{m}$. Find (a) the work done from $x=0$ to $x=5\ \text{m}$, (b) where the force becomes zero, (c) the work done from $x=0$ to $x=8\ \text{m}$, and (d) the position at which the total work done since $x=0$ is greatest.
(a) Triangle $\tfrac12\times2\times10=10\ \text{J}$ plus rectangle $3\times10=30\ \text{J}$: $W_{0\to5}=40\ \text{J}$.
(b) From $x=5$ to $8\ \text{m}$ the force falls by $15\ \text{N}$ in $3\ \text{m}$, i.e. $5\ \text{N}$ per metre; it reaches zero $2\ \text{m}$ after $x=5$, at $x=7\ \text{m}$.
(c) From $5$ to $7\ \text{m}$: triangle above the axis, $+\tfrac12\times2\times10=+10\ \text{J}$. From $7$ to $8\ \text{m}$: triangle below the axis, $-\tfrac12\times1\times5=-2.5\ \text{J}$. Total $W_{0\to8}=40+10-2.5=47.5\ \text{J}$.
(d) The total grows while $F\gt0$ and shrinks once $F\lt0$, so it is greatest where $F=0$: at $x=7\ \text{m}$, where $W=50\ \text{J}$.
Check Area below the axis is negative work: beyond $x=7\ \text{m}$ the force opposes the motion, just as friction would.
✏️ Example 4 — Integrating a variable force
(a) A force $\mathbf{F}=(3x^2\,\hat{\mathbf{i}}+4\,\hat{\mathbf{j}})\ \text{N}$, with $x$ in metres, acts on a particle that moves in the $xy$-plane from the origin to the point $(2\ \text{m},\,3\ \text{m})$. Find the work done by the force. (b) A spring has $k=800\ \text{N/m}$. Find the work needed to stretch it slowly from its natural length to $5.0\ \text{cm}$, and then from $5.0\ \text{cm}$ to $10\ \text{cm}$.
(a) Set-up $W=\displaystyle\int\left(F_x\,dx+F_y\,dy\right)$. $F_x$ depends only on $x$ and $F_y$ is constant, so the two integrals separate and the path does not matter.
(a) Value $W=\displaystyle\int_0^2 3x^2\,dx+\int_0^3 4\,dy=\Big[x^3\Big]_0^2+4\times3=8+12=20\ \text{J}$.
(b) $W_1=\tfrac12k(0.050)^2=400\times0.0025=1.0\ \text{J}$; $W_2=\tfrac12k\left(0.10^2-0.050^2\right)=400\times0.0075=3.0\ \text{J}$.
Lesson The second $5\ \text{cm}$ costs three times the first: never write $\tfrac12k(\Delta x)^2$ for a stretch that does not start from the natural length.

In the widget, choose the force $F=12-3x$ (in newtons, $x$ in metres) acting on the $2.0\ \text{kg}$ block, which starts from rest at $x=0$ on a smooth floor. Where is the block moving fastest, and how fast is it going there?

Choose $F=12-3x$ and set $x=4.0\ \text{m}$: the readouts show $F=0$, work done $W=24\ \text{J}$, kinetic energy $24\ \text{J}$ and speed $4.9\ \text{m/s}$. The area under the graph keeps growing while $F\gt0$ and starts to shrink once $F\lt0$, so the speed peaks where the force is zero, not where it is largest. Move on to $x=8\ \text{m}$: the negative triangle cancels the positive one, $W=0$, and the block is back at rest.
Interactive 1 — Work as the Area under the F–x Graph

A $2.0\ \text{kg}$ block starts from rest at $x=0$ on a smooth floor and is pushed along by a force that depends on its position. Pick a force law and press Play: the shaded area under the $F$–$x$ graph grows as the block moves (green above the axis, red below), and the block's kinetic energy always equals that area. Drag the slider to stop at any $x$.

4.0 m
force $F(x)$—
work done $W$—
kinetic energy—
speed $v$—

A spring with $k=200\ \text{N/m}$ is already stretched by $10\ \text{cm}$. The work needed to stretch it slowly to $20\ \text{cm}$ is

Kinetic energy and the work–energy theorem

What does net work do to a body? Take the simplest case: a constant net force $F$ along the motion of a body of mass $m$, which accelerates uniformly from speed $u$ to speed $v$ over a distance $d$. From Section 2.1, $v^2=u^2+2ad$, and $F=ma$, so

$$W_\text{net}=Fd=m\,ad=m\,\frac{v^2-u^2}{2}=\tfrac12mv^2-\tfrac12mu^2 .$$

The net work equals the change in the quantity $\tfrac12mv^2$. This quantity deserves a name.

📘 Definition 4.3 — Kinetic energy

The kinetic energy of a body of mass $m$ moving with speed $v$ (every part of it with the same velocity) is

$$K=\tfrac12mv^2=\frac{p^2}{2m},$$

where $p=mv$ is the magnitude of its momentum. Kinetic energy is a scalar, never negative, measured in joules, and depends only on the speed, not on the direction of motion.

The derivation above assumed a constant force, but the result is general. For a force that varies with position, write Newton's second law with the chain rule, $F=m\dfrac{dv}{dt}=m\dfrac{dv}{dx}\dfrac{dx}{dt}=mv\dfrac{dv}{dx}$, and integrate along the motion:

$$W_\text{net}=\int_{x_1}^{x_2}F\,dx=\int_{u}^{v}mv\,dv=\tfrac12mv^2-\tfrac12mu^2 .$$

In two or three dimensions the same steps go through with $\mathbf{F}\cdot d\mathbf{r}=m\,\dfrac{d\mathbf{v}}{dt}\cdot\mathbf{v}\,dt=d\!\left(\tfrac12mv^2\right)$: the part of the force perpendicular to the velocity changes the direction of motion but not the speed, and does no work.

📐 Theorem 4.4 — Work–energy theorem

For a particle (or a body moving without rotation, all of whose parts have the same velocity), observed from an inertial frame, the work done by the net force — that is, the sum of the works done by all the forces acting on it, including friction, normal forces and tensions — equals the change in its kinetic energy:

$$W_\text{net}=K_f-K_i=\tfrac12mv^2-\tfrac12mu^2 .$$

The theorem holds for constant and variable forces and for any path. Positive net work speeds the body up, negative net work slows it down, zero net work leaves its speed unchanged.

The theorem is a scalar statement — one equation, with no directions to resolve — and it never mentions time. That is exactly why it is so quick: use it whenever a problem gives or asks for speeds and distances, and use Newton's second law when it asks for accelerations or times.

Stopping distance. A car of mass $m$ moving at $u$ skids to rest on a level road with kinetic friction $\mu_kmg$. The only force doing work is friction: $-\mu_kmg\,s=0-\tfrac12mu^2$, so

$$s=\frac{u^2}{2\mu_kg}.$$

The stopping distance is independent of the mass and proportional to the square of the speed: double the speed and the car needs four times the distance. This one fact sits behind every speed limit near a school.

Kinetic energy and momentum. Since $K=p^2/2m$: two bodies with the same momentum have kinetic energies inversely proportional to their masses (the lighter one has more), and two bodies with the same kinetic energy have momenta proportional to $\sqrt m$ (the heavier one has more). If the momentum of a body rises by a factor $n$, its kinetic energy rises by $n^2$.

🧭 Problem-solving strategy — Using the work–energy theorem
  1. Choose the body and two instants: "initial" and "final". Write $K_i$ and $K_f$.
  2. Draw its free-body diagram. List every force, including friction, normal forces and tensions.
  3. Find the work done by each force over the motion: $Fd\cos\theta$ for constant forces, an area or an integral for variable ones; $0$ for forces perpendicular to the motion.
  4. Add them (with signs) and set the sum equal to $K_f-K_i$. Solve for the unknown speed, distance or force.
  5. If a force's size depends on $N$ (friction), get $N$ from the equation perpendicular to the motion first.
✏️ Example 5 — A bullet through a plank
A $10\ \text{g}$ bullet moving at $300\ \text{m/s}$ passes through a $6.0\ \text{cm}$ thick wooden plank and emerges at $200\ \text{m/s}$. (a) Find the average resistive force of the wood on the bullet. (b) The bullet is fired at $300\ \text{m/s}$ into a stack of identical planks held firmly together. Assuming the same resistive force, how far into the stack does it go?
Find the average resistive force (a) before you open the solution:
Energies $m=0.010\ \text{kg}$: $K_i=\tfrac12(0.010)(300)^2=450\ \text{J}$; after the plank $K_f=\tfrac12(0.010)(200)^2=200\ \text{J}$.
(a) Work–energy: $-F\times0.060=200-450$, so $F=\dfrac{250}{0.060}=4.2\times10^3\ \text{N}$ — over four hundred times the bullet's weight.
(b) To stop, the wood must take all $450\ \text{J}$: $4167\times s=450$, $s=0.108\ \text{m}=10.8\ \text{cm}$ — through the first plank and $4.8\ \text{cm}$ into the second.
⏱ Shortcut With a constant force, distance $\propto$ kinetic energy lost: one plank removes $250$ of the $450\ \text{J}$, so the bullet goes $\dfrac{450}{250}=1.8$ plank thicknesses.
Check The bullet lost one-third of its speed but five-ninths of its kinetic energy in the first plank — energy goes as $v^2$.
✏️ Example 6 — A fading push on a rough floor
A $2.0\ \text{kg}$ block rests at $x=0$ on a rough horizontal floor with $\mu_k=0.20$ and $\mu_s=0.30$. From $t=0$ a horizontal force $F=(20-4x)\ \text{N}$ ($x$ in metres) acts on it along $+x$. Take $g=10\ \text{m/s}^2$. (a) Find the greatest speed of the block and where it occurs. (b) Find where the block first comes to rest. (c) Does it stay at rest there?
Find the greatest speed and the stopping point yourself first:
Start? At $x=0$ the push is $20\ \text{N}$, more than the static limit $\mu_smg=6\ \text{N}$, so the block starts to slide. While it slides along $+x$, kinetic friction is $\mu_kmg=4\ \text{N}$ backward.
Net work $W_\text{net}(x)=\displaystyle\int_0^x(20-4x'-4)\,dx'=16x-2x^2$, and by the work–energy theorem $\tfrac12mv^2=16x-2x^2$.
(a) $K$ is greatest where $\dfrac{dK}{dx}=16-4x=0$, i.e. at $x=4\ \text{m}$, where the push $20-16=4\ \text{N}$ exactly balances friction. Then $K=64-32=32\ \text{J}$ and $v=\sqrt{2\times32/2.0}=5.66\ \text{m/s}$.
(b) $K=0$ again when $16x-2x^2=0$: at $x=8\ \text{m}$.
(c) At $x=8\ \text{m}$ the applied force is $20-32=-12\ \text{N}$, i.e. $12\ \text{N}$ pointing back towards the origin. The static limit is only $6\ \text{N}$, so the block does not stay: it starts sliding back.
Check Graph check: the net force $16-4x$ is a straight line from $16\ \text{N}$ to $-16\ \text{N}$ over $0$–$8\ \text{m}$; its positive and negative triangles ($32\ \text{J}$ each) cancel, giving $K=0$ at $x=8\ \text{m}$ ✓.

In the braking widget, keep the level road ($\theta=0^\circ$) and $\mu_k=0.50$. Set the speed first to $10\ \text{m/s}$ and then to $20\ \text{m/s}$. By what factor does the stopping distance grow?

With $\mu_k=0.50$ on the level, the readouts show a deceleration of $4.9\ \text{m/s}^2$ and stopping distances $10.2\ \text{m}$ at $10\ \text{m/s}$ and $40.8\ \text{m}$ at $20\ \text{m/s}$ — a factor of $4$. Friction does the same work per metre ($4.9\ \text{kJ}$ per metre for the $1000\ \text{kg}$ car), and doubling the speed gives four times the kinetic energy to remove, so $s=u^2/(2\mu_kg)$ grows as $u^2$. On the graph the straight line of $K$ against distance keeps the same slope but starts four times higher.
Interactive 2 — Braking Distance and the Work–Energy Theorem

A $1000\ \text{kg}$ car locks its brakes at speed $u$ on a road that may slope up ($\theta\gt0$) or down ($\theta\lt0$). Press Play to watch it skid. The graph shows its kinetic energy against the distance skidded — a straight line, because friction and gravity are constant forces, so they remove energy at a fixed rate per metre. The bars show that the work done by friction plus the work done by gravity always equals the change in kinetic energy.

20 m/s0.500°
deceleration—
stopping distance—
work by friction—
work by gravity—
✏️ Example 7 — NEET-style: let the work–energy theorem pick the option
(a) A $0.50\ \text{kg}$ ball is thrown straight up at $20\ \text{m/s}$ and is caught at the same height on its way down, moving at $16\ \text{m/s}$. The work done on it by air resistance during the whole flight is (A) $-36\ \text{J}$ (B) $-64\ \text{J}$ (C) $-100\ \text{J}$ (D) $+36\ \text{J}$
(b) The brakes of a car reduce its speed from $72\ \text{km/h}$ to $36\ \text{km/h}$ in $30\ \text{m}$. With the same braking force, the car travels a further (A) $30\ \text{m}$ (B) $15\ \text{m}$ (C) $10\ \text{m}$ (D) $7.5\ \text{m}$ before it stops.
Before you open the solution, find the work done by air resistance in (a):
(a) Choose the stages Take the whole flight as one motion. The ball starts and ends at the same height, so gravity's work on the way up ($-mgh$) and on the way down ($+mgh$) cancel: $W_\text{grav}=0$. Only air resistance is left in $W_\text{net}$.
(a) Work–energy $W_\text{air}=K_f-K_i=\tfrac12(0.50)\left(16^2-20^2\right)=64-100=-36\ \text{J}$ (Theorem 4.4).
Answer (a) (A) $-36\ \text{J}$.
(b) Energies, not speeds $72\ \text{km/h}=20\ \text{m/s}$ and $36\ \text{km/h}=10\ \text{m/s}$. Halving the speed leaves $\left(\tfrac12\right)^2=\tfrac14$ of the kinetic energy, so the first $30\ \text{m}$ removed $\tfrac34K_0$. A constant braking force removes the same energy in every metre, so the remaining $\tfrac14K_0$ needs $\dfrac{1/4}{3/4}\times30\ \text{m}=10\ \text{m}$.
Answer (b) (C) $10\ \text{m}$.
⏱ Shortcut In (a), air resistance always opposes the motion, so its work is negative: (D) goes at once; (B) and (C) are just the final and the initial kinetic energy. In (b), the total stopping distance goes as $u^2$: from $20\ \text{m/s}$ it is $\dfrac{30}{3/4}=40\ \text{m}$, so $10\ \text{m}$ remain. (B) assumes that distance goes as speed.
⚠️ NEET traps

1. "Work" is not "effort". Holding a load still, carrying a suitcase along a level platform, whirling a stone in a horizontal circle, a satellite in a circular orbit: in each the force does zero work, because nothing moves or the force is perpendicular to the motion. Statement questions are built on exactly these cases.

2. Friction does not always do negative work. Static friction on a crate in an accelerating truck points forward and does positive work in the ground frame. "Friction always does negative work" and "static friction never does work" are both false. Work also depends on the frame, because displacement does.

3. Units before formulas. Convert grams to kilograms, centimetres to metres and $\text{km/h}$ to $\text{m/s}$ (divide by $3.6$) before using $\tfrac12mv^2$ or $\tfrac12kx^2$. A $10\ \text{g}$ bullet at $400\ \text{m/s}$ carries $800\ \text{J}$, not $8\times10^5\ \text{J}$; a spring of $200\ \text{N/m}$ stretched by $10\ \text{cm}$ stores $1\ \text{J}$, not $10^4\ \text{J}$.

4. Forgetting a force, or taking $N=mg$. The work–energy theorem needs the work of all forces. A rope pulling at an angle, a slope or a downward push all change $N$, and so change the friction work (Example 1). Forces perpendicular to the motion contribute zero — say so, then drop them.

5. Spring work with $\tfrac12k(\Delta x)^2$. From extension $x_1$ to $x_2$ the work is $\tfrac12k\left(x_2^2-x_1^2\right)$, with $x$ measured from the natural length. The work done by the spring has the opposite sign to the work done by the hand stretching it.

6. Squares, not sums. $K\propto p^2$ and $K\propto v^2$: a $100\%$ rise in momentum is a $300\%$ rise in kinetic energy (factor $4$), and doubling $K$ multiplies $p$ by only $\sqrt2$. Graph areas below the $x$-axis count as negative work, and the speed peaks where the force changes sign (Example 3).

A $1.0\ \text{kg}$ body and a $4.0\ \text{kg}$ body have momenta of the same magnitude. The ratio of their kinetic energies, $K_1:K_4$, is

Exercises

Take $g=9.8\ \text{m/s}^2$ unless told otherwise. Strings are light and inextensible; springs are ideal.

I
Work done by constant forces.
  • 1 A $5.0\ \text{kg}$ box is lifted vertically through $2.0\ \text{m}$ at constant speed. Find the work done by the lifting force and by gravity.
  • 2 A force of $25\ \text{N}$ acts at $60^\circ$ to the displacement of a body that moves $4.0\ \text{m}$. Find the work done by the force.
  • 3 A $3.0\ \text{kg}$ block slides $2.0\ \text{m}$ down a smooth incline of $30^\circ$. Find the work done on it by gravity and by the normal force.
  • 4 Find the work done by $\mathbf{F}=(2\hat{\mathbf{i}}+3\hat{\mathbf{j}}-\hat{\mathbf{k}})\ \text{N}$ during a displacement $\mathbf{d}=(4\hat{\mathbf{i}}-\hat{\mathbf{j}}+2\hat{\mathbf{k}})\ \text{m}$.
  • 5 A force $\mathbf{F}=(6\hat{\mathbf{i}}-8\hat{\mathbf{j}})\ \text{N}$ acts on a body while it is displaced by $\mathbf{d}=(3\hat{\mathbf{i}}+4\hat{\mathbf{j}})\ \text{m}$. Find the work done and the angle between $\mathbf{F}$ and $\mathbf{d}$.
  • 6 A $15\ \text{kg}$ sledge is pulled $20\ \text{m}$ at constant velocity across level snow by a rope at $30^\circ$ above the horizontal; $\mu_k=0.10$. Find the tension and the work done by it.
  • 7 How much work does the string's tension do on a stone whirled once round a horizontal circle at constant speed? On a pendulum bob during one swing? Explain.
  • 8 A $60\ \text{kg}$ person climbs a staircase $4.0\ \text{m}$ high. Find the work done on the person by gravity.
  • 9 A $2.0\ \text{kg}$ block is pushed $5.0\ \text{m}$ up a rough incline of $37^\circ$ ($\sin37^\circ=0.6$) at constant speed by a force parallel to the incline; $\mu_k=0.25$, $g=10\ \text{m/s}^2$. Find the work done by the push, by gravity and by friction, and the net work.
1 Lifting force $=mg=49\ \text{N}$ upward: $W=+98\ \text{J}$; gravity: $W=-98\ \text{J}$ (net work zero — constant speed).
2 $W=25\times4.0\times\cos60^\circ=50\ \text{J}$.
3 $W_\text{grav}=mg\,(d\sin30^\circ)=29.4\times1.0=29.4\ \text{J}$; $W_N=0$.
4 $W=8-3-2=3\ \text{J}$.
5 $W=18-32=-14\ \text{J}$; $|\mathbf{F}||\mathbf{d}|=10\times5=50$, $\cos\theta=-0.28$, $\theta=106^\circ$.
6 $T\cos30^\circ=\mu_k(mg-T\sin30^\circ)$ gives $T=\dfrac{0.10\times147}{0.866+0.050}=16.0\ \text{N}$; $W_T=16.05\times0.866\times20=278\ \text{J}$ (equal to the size of the friction work — constant velocity).
7 Zero in both cases: the tension is along the string, perpendicular to the velocity at every instant, so $\mathbf{T}\cdot d\mathbf{r}=0$ throughout.
8 $W=-mgh=-60\times9.8\times4.0=-2.4\times10^3\ \text{J}$ ($-2352\ \text{J}$).
9 Push $F=mg(\sin\theta+\mu_k\cos\theta)=20(0.6+0.2)=16\ \text{N}$, $W_F=80\ \text{J}$; $W_\text{grav}=-20\times0.6\times5.0=-60\ \text{J}$; $W_f=-0.25\times16\times5.0=-20\ \text{J}$; net $0$ (constant speed).
II
Variable forces, graphs and springs.
  • 1 A force $F=6x\ \text{N}$ ($x$ in m) acts along the $x$-axis. Find the work done as the body moves from $x=1\ \text{m}$ to $x=3\ \text{m}$.
  • 2 Find the work done by $F=(4-2x)\ \text{N}$ as a body moves from $x=0$ to $x=3\ \text{m}$. Over which part of this motion is the work negative?
  • 3 A force increases uniformly from $0$ to $20\ \text{N}$ as a body moves from $x=0$ to $x=4\ \text{m}$, and then stays at $20\ \text{N}$ until $x=6\ \text{m}$. Find the work done.
  • 4 A spring has $k=400\ \text{N/m}$. Find the work needed to stretch it from its natural length to $5.0\ \text{cm}$, and from $5.0\ \text{cm}$ to $10\ \text{cm}$.
  • 5 A force of $50\ \text{N}$ stretches a spring by $10\ \text{cm}$. Find the work done by the spring when it is stretched further, from $10\ \text{cm}$ to $20\ \text{cm}$.
  • 6 Find the work done by $\mathbf{F}=(2x\,\hat{\mathbf{i}}+3y^2\,\hat{\mathbf{j}})\ \text{N}$ as a particle moves from the origin to $(2\ \text{m},\,1\ \text{m})$.
  • 7 A repulsive force $F=\dfrac{6}{x^2}\ \text{N}$ ($x$ in m) acts along $+x$. Find the work it does as the body moves from $x=1\ \text{m}$ to $x=3\ \text{m}$.
  • 8 A uniform $3.0\ \text{kg}$ chain of length $1.2\ \text{m}$ lies on a smooth table with one-third of its length hanging over the edge. Find the work needed to pull the hanging part slowly back onto the table.
1 $W=\displaystyle\int_1^3 6x\,dx=3(9-1)=24\ \text{J}$.
2 $W=\Big[4x-x^2\Big]_0^3=12-9=3\ \text{J}$. The force is negative for $x\gt2\ \text{m}$, so the work from $2$ to $3\ \text{m}$ is negative ($-1\ \text{J}$; from $0$ to $2$ it is $+4\ \text{J}$).
3 Triangle $\tfrac12\times4\times20=40\ \text{J}$ plus rectangle $2\times20=40\ \text{J}$: $W=80\ \text{J}$.
4 $\tfrac12(400)(0.050)^2=0.50\ \text{J}$; $\tfrac12(400)(0.010-0.0025)=1.5\ \text{J}$.
5 $k=500\ \text{N/m}$; $W_s=-\tfrac12(500)(0.040-0.010)=-7.5\ \text{J}$.
6 $W=\displaystyle\int_0^2 2x\,dx+\int_0^1 3y^2\,dy=4+1=5\ \text{J}$.
7 $W=\displaystyle\int_1^3\frac{6}{x^2}\,dx=6\left(1-\tfrac13\right)=4.0\ \text{J}$.
8 Integrate over the hanging part: an element $dy$ at depth $y$ has mass $\dfrac{m}{L}dy$ and must be raised $y$: $W=\displaystyle\int_0^{L/3}\frac{m}{L}g\,y\,dy=\frac{mgL}{18}=\frac{3.0\times9.8\times1.2}{18}=1.96\ \text{J}$.
III
Kinetic energy and the work–energy theorem.
  • 1 Find the kinetic energy of a $1500\ \text{kg}$ car moving at $72\ \text{km/h}$.
  • 2 Bodies of mass $2.0\ \text{kg}$ and $8.0\ \text{kg}$ have equal kinetic energies. Find the ratio of their momenta.
  • 3 The momentum of a body increases by $20\%$. By what percentage does its kinetic energy increase?
  • 4 Use the work–energy theorem to find how high a $0.50\ \text{kg}$ ball rises when thrown straight up at $14\ \text{m/s}$ (ignore air resistance).
  • 5 A car moving at $15\ \text{m/s}$ locks its wheels on a road with $\mu_k=0.60$. Find the skidding distance.
  • 6 Find the skidding distance in part 5 if the car were moving at $30\ \text{m/s}$.
  • 7 A $2.0\ \text{kg}$ block at rest on a floor ($\mu_k=0.20$) is pushed $5.0\ \text{m}$ by a horizontal $12\ \text{N}$ force. Find its final speed.
  • 8 A $20\ \text{g}$ bullet moving at $500\ \text{m/s}$ stops after penetrating $10\ \text{cm}$ into a fixed block. Find the average resistive force.
  • 9 A bullet loses $20\%$ of its speed in passing through one plank. Assuming the same resistive force in every plank, in which plank of a thick stack does it come to rest?
1 $72\ \text{km/h}=20\ \text{m/s}$; $K=\tfrac12(1500)(20)^2=3.0\times10^5\ \text{J}$.
2 $p=\sqrt{2mK}\propto\sqrt m$: $p_2:p_8=\sqrt2:\sqrt8=1:2$.
3 $K\propto p^2$: factor $1.2^2=1.44$, an increase of $44\%$.
4 Gravity does $-mgh$: $-mgh=0-\tfrac12mu^2$, $h=\dfrac{u^2}{2g}=\dfrac{196}{19.6}=10\ \text{m}$.
5 $s=\dfrac{u^2}{2\mu_kg}=\dfrac{225}{11.76}=19.1\ \text{m}$.
6 Four times as far: $76.5\ \text{m}$ (about $77\ \text{m}$).
7 $W_F=60\ \text{J}$, $W_f=-0.20\times19.6\times5.0=-19.6\ \text{J}$; $K=40.4\ \text{J}$, $v=\sqrt{40.4}=6.36\ \text{m/s}$.
8 $K=\tfrac12(0.020)(500)^2=2500\ \text{J}$; $F=\dfrac{2500}{0.10}=2.5\times10^4\ \text{N}$.
9 After one plank $K$ falls to $0.8^2=0.64$ of its value, so each plank removes $0.36K_0$. $\dfrac{1}{0.36}=2.8$ planks: it stops inside the third plank.
IV
Harder problems and applications.
  • 1 A $1.0\ \text{kg}$ particle starts from rest at $x=0$ on a smooth surface and is acted on only by $F=(8-2x)\ \text{N}$. Find its speed at $x=2\ \text{m}$, its greatest speed, and where it next comes to rest.
  • 2 A $5.0\ \text{kg}$ block slides from rest $5.0\ \text{m}$ down a rough incline of $37^\circ$ ($\sin37^\circ=0.6$); $\mu_k=0.25$, $g=10\ \text{m/s}^2$. Find its speed at the bottom using the work–energy theorem.
  • 3 The position of a $2.0\ \text{kg}$ particle moving along the $x$-axis is $x=t^3-3t$ (in m, $t$ in s). Find the work done on it by the net force in the first $2.0\ \text{s}$.
  • 4 A $0.20\ \text{kg}$ stone dropped from a height of $20\ \text{m}$ hits the ground at $18\ \text{m/s}$. Find the work done by air resistance.
  • 5 A pendulum bob on a $1.0\ \text{m}$ string is released from rest with the string horizontal. Use the work–energy theorem to find its speed at the lowest point.
  • 6 (Modelling) A driver travelling at $90\ \text{km/h}$ sees an obstacle. Her reaction time is $0.70\ \text{s}$, after which the car skids with $\mu_k=0.70$. Find the total stopping distance from the moment she sees the obstacle.
  • 7 A $1.0\ \text{kg}$ block moving at $6.0\ \text{m/s}$ enters a rough strip on which the coefficient of kinetic friction increases with distance as $\mu_k=0.10x$ ($x$ in m, measured from the edge of the strip). Taking $g=10\ \text{m/s}^2$, find how far it goes into the strip.
1 $K=\displaystyle\int_0^x(8-2x')\,dx'=8x-x^2$. At $x=2$: $K=12\ \text{J}$, $v=4.90\ \text{m/s}$. Greatest at $x=4\ \text{m}$ ($F=0$): $K=16\ \text{J}$, $v=5.66\ \text{m/s}$. At rest again where $8x-x^2=0$: $x=8\ \text{m}$.
2 $W_\text{grav}=50\times0.6\times5.0=150\ \text{J}$; $W_f=-0.25\times50\times0.8\times5.0=-50\ \text{J}$; $K=100\ \text{J}$, $v=\sqrt{2\times100/5.0}=6.32\ \text{m/s}$.
3 $v=3t^2-3$: $v(0)=-3\ \text{m/s}$, $v(2)=9\ \text{m/s}$. $W=\tfrac12(2.0)(81-9)=72\ \text{J}$ (only speeds matter — the sign of $v(0)$ is irrelevant).
4 $W_\text{grav}+W_\text{air}=\Delta K$: $39.2+W_\text{air}=\tfrac12(0.20)(18)^2=32.4$, so $W_\text{air}=-6.8\ \text{J}$.
5 Tension is always perpendicular to the motion; only gravity works: $mgL=\tfrac12mv^2$, $v=\sqrt{2gL}=4.43\ \text{m/s}$.
6 $90\ \text{km/h}=25\ \text{m/s}$. Reaction distance $25\times0.70=17.5\ \text{m}$; braking $\dfrac{625}{2\times6.86}=45.6\ \text{m}$; total $63\ \text{m}$ ($63.1\ \text{m}$).
7 $W_f=-\displaystyle\int_0^x 0.10x'(1.0)(10)\,dx'=-0.5x^2$. Set $-0.5x^2=0-\tfrac12(1.0)(36)=-18$: $x=6.0\ \text{m}$.
🎯 Exam corner NEET · MCQ

E1. NEET · MCQ Match List-I with List-II ($g=10\ \text{m/s}^2$).
List-I: (a) work needed to stretch a spring of spring constant $200\ \text{N/m}$ by $10\ \text{cm}$ from its natural length (b) kinetic energy of a $10\ \text{g}$ bullet moving at $200\ \text{m/s}$ (c) work done by gravity on a $2\ \text{kg}$ stone that falls $5\ \text{m}$ (d) work done by $\mathbf{F}=(3\hat{\mathbf{i}}+4\hat{\mathbf{j}})\ \text{N}$ during the displacement $\mathbf{d}=(2\hat{\mathbf{i}}+\hat{\mathbf{j}})\ \text{m}$
List-II: (i) $1\ \text{J}$ (ii) $10\ \text{J}$ (iii) $100\ \text{J}$ (iv) $200\ \text{J}$
Choose the correct answer: (A) a-i, b-iii, c-iv, d-ii (B) a-ii, b-iv, c-iii, d-i (C) a-i, b-iv, c-iii, d-ii (D) a-iv, b-i, c-ii, d-iii

Each item (a) $\tfrac12kx^2=\tfrac12(200)(0.10)^2=1\ \text{J}$ (Result 4.3). (b) $\tfrac12(0.010)(200)^2=200\ \text{J}$. (c) $mgh=2\times10\times5=100\ \text{J}$. (d) $\mathbf{F}\cdot\mathbf{d}=6+4=10\ \text{J}$.
Answer (C) a-i, b-iv, c-iii, d-ii.
⏱ Shortcut (c) and (d) are one-line sums; once c-iii and d-ii are fixed only (C) survives — (A) and (D) fail on (c), (B) on (d). The units trap is in (a) and (b): with $10\ \text{cm}$ or $10\ \text{g}$ left unconverted, nothing in List-II fits.

E2. NEET · MCQ A $2\ \text{kg}$ block is raised vertically through $3\ \text{m}$ by a rope, with a constant upward acceleration of $2\ \text{m/s}^2$ ($g=10\ \text{m/s}^2$). The work done by the rope on the block is (A) $60\ \text{J}$ (B) $72\ \text{J}$ (C) $12\ \text{J}$ (D) $48\ \text{J}$

Tension Newton's second law upwards: $T-mg=ma$, so $T=m(g+a)=2(10+2)=24\ \text{N}$.
Work The tension is along the displacement: $W_T=Th=24\times3=72\ \text{J}$ (Definition 4.1).
Answer (B) $72\ \text{J}$.
⏱ Shortcut Work–energy: $W_T-mgh=\Delta K=mah$, so $W_T=mgh+mah=60+12$. (A) forgets the gain in kinetic energy, (C) is $\Delta K$ alone, and (D) uses $m(g-a)$, the tension for a downward acceleration.

E3. NEET · MCQ Assertion (A): A body moving along the $+x$ direction gains kinetic energy over a stretch in which its $F$–$x$ graph lies below the $x$-axis. Reason (R): The work done by a force along the $x$-axis equals the signed area under its $F$–$x$ graph. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Reason $W=\int F\,dx$ is the signed area under the $F$–$x$ graph (Result 4.2): true.
Assertion Below the axis $F\lt0$ while $dx\gt0$, so the area — the work — is negative, and by the work–energy theorem the body loses kinetic energy there (if this is the net force). False.
Answer (D).
⏱ Shortcut Decide A and R separately first. Here the true Reason itself shows that the Assertion is false.

E4. NEET · MCQ A $1.2\ \text{kg}$ body starts from rest at $x=0$ on a smooth horizontal floor. The only horizontal force on it acts along the $x$-axis and varies with position as shown. The kinetic energy of the body at $x=6\ \text{m}$ is (A) $20\ \text{J}$ (B) $17.5\ \text{J}$ (C) $15\ \text{J}$ (D) $12.5\ \text{J}$
−55123456x (m)F (N)

Read the graph From $4$ to $6\ \text{m}$ the force falls from $5\ \text{N}$ to $-5\ \text{N}$, so it crosses zero at $x=5\ \text{m}$.
Areas $0$–$2\ \text{m}$: $\tfrac12\times2\times5=5\ \text{J}$. $2$–$4\ \text{m}$: $2\times5=10\ \text{J}$. $4$–$5\ \text{m}$: $+\tfrac12\times1\times5=+2.5\ \text{J}$. $5$–$6\ \text{m}$: $-2.5\ \text{J}$ (below the axis).
Answer (C) $K=W=5+10+2.5-2.5=15\ \text{J}$ (Theorem 4.4); the speed is then $\sqrt{2\times15/1.2}=5\ \text{m/s}$.
⏱ Shortcut The two small triangles beyond $x=4\ \text{m}$ cancel, so $K(6)=K(4)=15\ \text{J}$. (A) adds the negative triangle as positive; (B) is the greatest kinetic energy, reached at $x=5\ \text{m}$ where $F=0$.

E5. NEET · MCQ Statement I: The work done by static friction on a body is always zero, because the surfaces in contact do not slide over each other. Statement II: The work–energy theorem holds only when every force on the body is constant. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement I A crate on the floor of a truck that accelerates forward is pushed forward by static friction while it moves forward with the truck, so friction does positive work on it in the ground frame. "No sliding" is about relative motion, not motion over the ground. Incorrect.
Statement II The theorem was proved for a variable force too, by integrating $F=mv\,\dfrac{dv}{dx}$ (Theorem 4.4). Incorrect.
Answer (B).
⏱ Shortcut Words like "always", "never" and "only" in a statement invite a counter-example. One example each — the crate, and any spring problem — settles both.

E6. NEET · MCQ How many of the following statements are correct?
(i) Work is a scalar quantity.
(ii) The SI unit of work is the joule, and its dimensional formula is $[\text{ML}^2\text{T}^{-2}]$.
(iii) The kinetic energy of a body depends on the direction of its velocity.
(iv) For the same coefficient of kinetic friction, the distance in which a vehicle skids to rest is proportional to the square of its initial speed.
(v) The net work done on a body moving with constant velocity is zero.
(vi) The work done on a body by a force perpendicular to its velocity at every instant is negative.
(A) Four (B) Three (C) Five (D) Two

Check each (i) ✓ $W=\mathbf{F}\cdot\mathbf{d}$ is a scalar product. (ii) ✓ $1\ \text{J}=1\ \text{kg m}^2\text{s}^{-2}$. (iii) ✗ $K=\tfrac12mv^2$ depends only on the speed. (iv) ✓ $s=\dfrac{u^2}{2\mu_kg}$. (v) ✓ the speed does not change, so $\Delta K=0$ (indeed the net force is zero). (vi) ✗ such a force does zero work — it turns the velocity without changing the speed.
Answer (A) four: (i), (ii), (iv) and (v).
⏱ Shortcut Mark ✓ / ✗ beside each line as you read; never keep a running count in your head.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. Is the sliding distance of a body really proportional to the square of its launch speed, as the work–energy theorem predicts — and what does the constant of proportionality tell you about friction?

Why it matters. Road-safety engineers, accident investigators and the designers of runway overruns and gravel escape lanes all use $s=u^2/(2\mu g)$. Investigators measure skid marks to estimate how fast a vehicle was going before a crash; lane designers choose a surface whose friction stops a runaway truck within the available length. The square law is why a small increase in speed has a large effect on safety. Testing it yourself shows how well a simple constant-friction model describes a real sliding object.

What to do.

  1. Choose a flat object that slides well (a box of tiles, a book, a hockey puck) on a long, level floor. Mark a start line and fix a phone above it to film the launch at a known frame rate, with a metre scale in view.
  2. Flick the object across the start line at different speeds. From the video, find the launch speed (distance moved in a few frames ÷ time). Measure the sliding distance $s$ with a tape.
  3. Collect at least eight launches over a wide range of speeds. Plot $s$ against $u$, and then $s$ against $u^2$. Which graph is a straight line through the origin?
  4. From the slope of the $s$–$u^2$ line find $\mu_k=\dfrac{1}{2g\times\text{slope}}$. Check it independently by tilting a board until the object slides down at steady speed ($\mu_k=\tan\theta$).
  5. Add a known mass on top and repeat a few launches. Does the stopping distance change?

Tools: Phone camera (slow-motion mode helps) and a free video-analysis app or frame-by-frame player, measuring tape, metre scale, spreadsheet for the graphs.

Hand in: A table of $u$ and $s$; both graphs with best-fit lines; your two values of $\mu_k$ and a short paragraph comparing them and explaining why the mass did or did not matter.

Going further. Accident reports quote speeds "from skid marks". Using a typical dry-road $\mu_k\approx0.7$, make a table of skid length against speed from $30$ to $120\ \text{km/h}$, and discuss how uncertain such an estimate is if $\mu_k$ is only known to $\pm0.1$.

Instructor note: students typically find $s\propto u^2$ with a clear curve on the $s$–$u$ graph; scatter is dominated by the speed measurement, so encourage averaging over several frames. Values of $\mu_k$ from the slope and from the tilted board usually agree within 20–30%; discuss why (wobble at launch, slight floor slope). Adding mass should leave $s$ unchanged within the scatter — a direct test that $s=u^2/(2\mu_kg)$ is independent of $m$. In the extension, a $\pm0.1$ uncertainty in $\mu_k$ gives roughly $\pm7\%$ in the inferred speed.

🧪 Self-check quiz

0/5 correct

Q1. A crate sits on the flat bed of a truck that is accelerating forward, and the crate does not slip. The work done on the crate by friction (in the ground frame) is

Q2. The kinetic energy of a $10\ \text{g}$ bullet moving at $300\ \text{m/s}$ is

Q3. The kinetic energy of a body is doubled. Its momentum becomes

Q4. In which of these cases does the force named do zero work?

Q5. Two cars on the same road (same $\mu_k$) skid to rest with locked wheels from speeds $u$ and $2u$. The ratio of their skidding distances is