Chapter 1 · Physics and Measurement

1.2 Dimensions and Dimensional Analysis

Every physical quantity is a product of powers of the base quantities. Both sides of a correct equation must have the same dimensions — a single rule that catches errors, finds the dimensions of unknown constants, predicts formulas and converts units between systems.

In 1950 the British physicist G. I. Taylor published an estimate of the energy released by the first nuclear explosion, a figure that was still secret. His data were a series of photographs, with a time scale, of the growing fireball. His method was almost entirely dimensional: the radius $R$ of the blast could depend only on the energy $E$, the time $t$ and the density $\rho$ of the air, and the only way to combine these into a length is $R\propto(Et^2/\rho)^{1/5}$. Reading $R$ and $t$ from the photographs gave $E$ — about 17 kilotons of TNT, remarkably close to the classified value of about 20 kilotons.

The idea behind that calculation is simple. Every quantity in mechanics is built from mass, length and time, and an equation can only be true if both sides are built in the same way. This section develops that idea: the dimensions of a quantity, the principle of homogeneity, and its four uses in NEET questions — checking equations, finding the dimensions of constants, deducing how one quantity depends on others, and converting units between systems. We use the base units and the rules of significant figures from Section 1.1.

Dimensions of a physical quantity

Speed is a length divided by a time; force is a mass times a length divided by a time squared. Whatever units are used — metres or feet, seconds or hours — this structure stays the same. The dimensions of a quantity record exactly this structure.

📘 Definition 1.6 — Dimensions, dimensional formula, dimensional equation

The dimensions of a physical quantity are the powers to which the base quantities must be raised to represent it. The base quantities are written as symbols in square brackets: mass $[\text{M}]$, length $[\text{L}]$, time $[\text{T}]$, electric current $[\text{A}]$, temperature $[\text{K}]$, amount of substance $[\text{mol}]$ (and luminous intensity $[\text{cd}]$).

The expression $[\text{M}^a\text{L}^b\text{T}^c\ldots]$ is the dimensional formula of the quantity, and an equation such as $[F]=[\text{M}\text{L}\text{T}^{-2}]$ — "the dimensions of force are …" — is its dimensional equation. Square brackets around a symbol mean "the dimensions of".

To find a dimensional formula, start from any equation that defines the quantity and replace every quantity by its dimensions. Dimensions multiply and divide like algebraic symbols: $[AB]=[A][B]$, $[A/B]=[A]/[B]$, $[A^n]=[A]^n$. Pure numbers ($2$, $\tfrac12$, $\pi$) have no dimensions. For example,

$$[v]=\frac{[\text{L}]}{[\text{T}]}=[\text{L}\text{T}^{-1}],\quad [a]=[\text{L}\text{T}^{-2}],\quad [F]=[m][a]=[\text{M}\text{L}\text{T}^{-2}],\quad [W]=[F][s]=[\text{M}\text{L}^2\text{T}^{-2}].$$

The same rule works for derivatives and integrals, which you will meet from Chapter 2 on: $\left[\dfrac{dy}{dx}\right]=\dfrac{[y]}{[x]}$ and $\left[\displaystyle\int y\,dx\right]=[y][x]$. The table collects the dimensional formulas you will need throughout the course; the electrical quantities are defined properly in their own chapters, but NEET asks about their dimensions from the start — "which pair has the same dimensions?" and "match the quantity with its dimensional formula" are among its favourite questions on this unit.

QuantityDefining relationSI unitDimensions
velocity, speed$v=s/t$$\text{m/s}$$[\text{L}\text{T}^{-1}]$
acceleration, $g$$a=\Delta v/t$$\text{m/s}^2$$[\text{L}\text{T}^{-2}]$
force, weight$F=ma$N$[\text{M}\text{L}\text{T}^{-2}]$
momentum, impulse$p=mv$, $J=F\Delta t$$\text{kg m/s}=\text{N s}$$[\text{M}\text{L}\text{T}^{-1}]$
work, energy, heat, torque$W=Fs$, $\tau=rF$J (torque: N m)$[\text{M}\text{L}^2\text{T}^{-2}]$
power$P=W/t$W$[\text{M}\text{L}^2\text{T}^{-3}]$
pressure, stress, elastic moduli, energy density$p=F/A$Pa$[\text{M}\text{L}^{-1}\text{T}^{-2}]$
density$\rho=m/V$$\text{kg/m}^3$$[\text{M}\text{L}^{-3}]$
frequency, angular velocity$\nu=1/T$, $\omega=\theta/t$Hz, rad/s$[\text{T}^{-1}]$
angular momentum, Planck constant$L=mvr$, $E=h\nu$J s$[\text{M}\text{L}^2\text{T}^{-1}]$
moment of inertia$I=mr^2$$\text{kg m}^2$$[\text{M}\text{L}^2]$
gravitational constant$F=Gm_1m_2/r^2$$\text{N m}^2\text{kg}^{-2}$$[\text{M}^{-1}\text{L}^3\text{T}^{-2}]$
spring constant, surface tension$F=kx$, $S=F/l$N/m$[\text{M}\text{T}^{-2}]$
coefficient of viscosity$F=\eta A\,\dfrac{dv}{dx}$Pa s$[\text{M}\text{L}^{-1}\text{T}^{-1}]$
specific heat capacity$Q=mc\Delta T$$\text{J kg}^{-1}\text{K}^{-1}$$[\text{L}^2\text{T}^{-2}\text{K}^{-1}]$
latent heat$Q=mL$J/kg$[\text{L}^2\text{T}^{-2}]$
gas constant$pV=nRT$$\text{J mol}^{-1}\text{K}^{-1}$$[\text{M}\text{L}^2\text{T}^{-2}\text{K}^{-1}\text{mol}^{-1}]$
Boltzmann constant$E\sim k_BT$J/K$[\text{M}\text{L}^2\text{T}^{-2}\text{K}^{-1}]$
thermal conductivity$\dfrac{Q}{t}=kA\dfrac{\Delta T}{l}$$\text{W m}^{-1}\text{K}^{-1}$$[\text{M}\text{L}\text{T}^{-3}\text{K}^{-1}]$
Stefan constant$P=\sigma AT^4$$\text{W m}^{-2}\text{K}^{-4}$$[\text{M}\text{T}^{-3}\text{K}^{-4}]$
electric charge$q=It$C$[\text{A}\text{T}]$
potential difference, emf$V=W/q$V$[\text{M}\text{L}^2\text{T}^{-3}\text{A}^{-1}]$
resistance$R=V/I$Ω$[\text{M}\text{L}^2\text{T}^{-3}\text{A}^{-2}]$
capacitance$C=q/V$F$[\text{M}^{-1}\text{L}^{-2}\text{T}^4\text{A}^2]$
permittivity $\varepsilon_0$$F=\dfrac{q_1q_2}{4\pi\varepsilon_0r^2}$$\text{C}^2\text{N}^{-1}\text{m}^{-2}$$[\text{M}^{-1}\text{L}^{-3}\text{T}^4\text{A}^2]$
electric field$E=F/q$N/C = V/m$[\text{M}\text{L}\text{T}^{-3}\text{A}^{-1}]$
magnetic field$F=qvB$T$[\text{M}\text{T}^{-2}\text{A}^{-1}]$
magnetic flux$\Phi=BA$Wb$[\text{M}\text{L}^2\text{T}^{-2}\text{A}^{-1}]$
inductance$\varepsilon=L\,\dfrac{dI}{dt}$H$[\text{M}\text{L}^2\text{T}^{-2}\text{A}^{-2}]$
permeability $\mu_0$$B=\dfrac{\mu_0I}{2\pi r}$$\text{N/A}^2$$[\text{M}\text{L}\text{T}^{-2}\text{A}^{-2}]$
📘 Definition 1.7 — Dimensional and dimensionless quantities

A quantity whose dimensional formula is $[\text{M}^0\text{L}^0\text{T}^0]$ is dimensionless. Quantities fall into four groups:

  • dimensional variables — velocity, force, energy …;
  • dimensional constants — $G$, $h$, $c$, $k_B$, $R$: fixed numbers that nonetheless have dimensions;
  • dimensionless variables — angle, strain, refractive index, relative density, coefficient of friction;
  • dimensionless constants — pure numbers such as $2$, $\pi$, $e$.

Having a unit is not the same as having dimensions: the angle $\theta=s/r$ has the unit radian but is dimensionless.

✏️ Example 1 — Dimensions from defining equations
Find the dimensional formulas of (a) the gravitational constant $G$, (b) the Planck constant $h$ (from $E=h\nu$), (c) the coefficient of viscosity $\eta$, using Stokes' law $F=6\pi\eta rv$ for a sphere of radius $r$ moving at speed $v$ through a fluid, and its SI unit, (d) the permittivity $\varepsilon_0$.
(a) $G=\dfrac{Fr^2}{m_1m_2}$: $[G]=\dfrac{[\text{M}\text{L}\text{T}^{-2}][\text{L}^2]}{[\text{M}^2]}=[\text{M}^{-1}\text{L}^3\text{T}^{-2}]$.
(b) $h=\dfrac{E}{\nu}$: $[h]=\dfrac{[\text{M}\text{L}^2\text{T}^{-2}]}{[\text{T}^{-1}]}=[\text{M}\text{L}^2\text{T}^{-1}]$ — the same as angular momentum.
(c) $6\pi$ is a pure number, so $[\eta]=\dfrac{[F]}{[r][v]}=\dfrac{[\text{M}\text{L}\text{T}^{-2}]}{[\text{L}][\text{L}\text{T}^{-1}]}=[\text{M}\text{L}^{-1}\text{T}^{-1}]$. Unit: $\text{kg m}^{-1}\text{s}^{-1}=\text{Pa s}$.
(d) $\varepsilon_0=\dfrac{q_1q_2}{4\pi Fr^2}$: $[\varepsilon_0]=\dfrac{[\text{A}\text{T}]^2}{[\text{M}\text{L}\text{T}^{-2}][\text{L}^2]}=[\text{M}^{-1}\text{L}^{-3}\text{T}^4\text{A}^2]$.
Check $[G][\text{M}]/[\text{L}]=[\text{L}^2\text{T}^{-2}]$ is a speed squared — as in the escape speed $\sqrt{2GM/R}$ you will meet in Chapter 6.

Which of these quantities has the dimensions $[\text{M}\text{L}^2\text{T}^{-2}]$?

The principle of homogeneity

You cannot add $3\ \text{kg}$ to $5\ \text{m}$; the sum has no meaning. Every term of a physical equation must therefore be the same kind of quantity, whatever units are used.

📐 Principle 1.6 — Principle of homogeneity of dimensions

In any physically correct equation, every term on both sides has the same dimensions. Consequently:

  1. only quantities with the same dimensions can be added, subtracted or equated;
  2. the argument of $\sin$, $\cos$, $\tan$, $e^x$ and $\log$ must be dimensionless, and the value of such a function is dimensionless;
  3. an equation that fails the test is certainly wrong; an equation that passes it may still be wrong by a dimensionless factor ($2$, $\tfrac12$, $\pi$) or a dimensionless function.

Some combinations appear so often in NEET options that it pays to know their dimensions at a glance.

📐 Result 1.7 — Combinations worth remembering

Speeds: $\dfrac{1}{\sqrt{\mu_0\varepsilon_0}}$, $\ \dfrac{E}{B}$, $\ \sqrt{\dfrac{GM}{R}}$, $\ \sqrt{\dfrac{T}{\mu}}$ ($T$ tension, $\mu$ mass per unit length) all have dimensions $[\text{L}\text{T}^{-1}]$.

Times: $RC$, $\ \dfrac{L}{R}$, $\ \sqrt{LC}$, $\ \sqrt{\dfrac{l}{g}}$, $\ \sqrt{\dfrac{m}{k}}$ all have dimensions $[\text{T}]$.

Energies: $h\nu$, $\ k_BT$, $\ qV$, $\ \tfrac12CV^2$, $\ \tfrac12LI^2$, $\ pV$ all have dimensions $[\text{M}\text{L}^2\text{T}^{-2}]$.

Energy per unit volume (= pressure): $\tfrac12\varepsilon_0E^2$ and $\dfrac{B^2}{2\mu_0}$ have dimensions $[\text{M}\text{L}^{-1}\text{T}^{-2}]$.

✏️ Example 2 — Checking equations
Check the dimensional consistency of (a) $v^2=u^2+2as$; (b) $s=ut+\tfrac13at^3$; (c) $T=2\pi\sqrt{l/g}$ for a pendulum; (d) the distance covered in the $n$th second of uniformly accelerated motion, $s_n=u+\tfrac{a}{2}(2n-1)$.
(a) $[v^2]=[u^2]=[\text{L}^2\text{T}^{-2}]$; $[as]=[\text{L}\text{T}^{-2}][\text{L}]=[\text{L}^2\text{T}^{-2}]$. Consistent ✓.
(b) $[ut]=[\text{L}]$ but $[at^3]=[\text{L}\text{T}^{-2}][\text{T}^3]=[\text{L}\text{T}]$. Inconsistent: certainly wrong. (The correct term is $\tfrac12at^2$.)
(c) $\left[\sqrt{l/g}\right]=\sqrt{[\text{L}]/[\text{L}\text{T}^{-2}]}=[\text{T}]$, and $2\pi$ is dimensionless. Consistent ✓ — but dimensions alone could not have produced the $2\pi$.
(d) Apparently $[s_n]=[\text{L}]$ while $[u]=[\text{L}\text{T}^{-1}]$ and $[a]=[\text{L}\text{T}^{-2}]$ — inconsistent? No: the formula comes from $s_n=s(n)-s(n-1)$ with the time interval $\Delta t=1\ \text{s}$ silently set to one. Written in full, $s_n=\left[u+\tfrac a2(2n-1)\,\Delta t\right]\Delta t$, which is consistent ($n$ is a pure number).
Lesson Before declaring a formula wrong, look for a quantity that has been set equal to one — a hidden "per unit length", "per second" or "per mole".
✏️ Example 3 — Dimensions of unknown constants
(a) The position of a particle is $x=\alpha t+\beta t^2+\gamma e^{-\kappa t}$. Find the dimensions of $\alpha$, $\beta$, $\gamma$ and $\kappa$. (b) A real gas (one mole) obeys $\left(p+\dfrac{a}{V^2}\right)(V-b)=RT$, with $p$ the pressure and $V$ the volume. Find the dimensions of $a$, $b$ and $a/b$. (c) A force varies as $F=A\sqrt{x}+Bt^2$, with $x$ a distance and $t$ a time. Find the dimensions of $A/B$.
In (b), find the power of $\text{L}$ in $[a]$ before you open the solution:
(a) Every term is a length. $[\alpha]=[\text{L}\text{T}^{-1}]$, $[\beta]=[\text{L}\text{T}^{-2}]$. The exponent must be dimensionless, so $[\kappa]=[\text{T}^{-1}]$; then $e^{-\kappa t}$ is a pure number and $[\gamma]=[\text{L}]$.
(b) $a/V^2$ is added to a pressure: $[a]=[p][V^2]=[\text{M}\text{L}^{-1}\text{T}^{-2}][\text{L}^6]=[\text{M}\text{L}^5\text{T}^{-2}]$. $b$ is subtracted from a volume: $[b]=[\text{L}^3]$. So $\left[\dfrac ab\right]=[\text{M}\text{L}^2\text{T}^{-2}]$ — an energy.
(c) $[A]=\dfrac{[F]}{[\text{L}^{1/2}]}=[\text{M}\text{L}^{1/2}\text{T}^{-2}]$, $[B]=\dfrac{[F]}{[\text{T}^2]}=[\text{M}\text{L}\text{T}^{-4}]$, so $\left[\dfrac AB\right]=[\text{L}^{-1/2}\text{T}^2]$.
⏱ Shortcut For a ratio you need not find each constant: $\dfrac AB=\dfrac{t^2}{\sqrt x}$ dimensionally, because $A\sqrt x$ and $Bt^2$ have the same dimensions.

A speed varies with time as $v=at+\dfrac{b}{t+c}$. The dimensions of $c$ are

Deducing relations: the method of dimensions

If we know which quantities a result depends on, homogeneity can often tell us how it depends on them — before any detailed theory.

🧭 Problem-solving strategy — the method of dimensions
  1. List the quantities $x,y,z$ on which the unknown $Q$ can depend (from physical reasoning).
  2. Assume a product of powers: $Q=k\,x^ay^bz^c$, with $k$ a dimensionless constant.
  3. Substitute dimensional formulas and equate the powers of M, L and T on the two sides: three linear equations.
  4. Solve for $a,b,c$ and write the relation. The constant $k$ must come from experiment or a full theory.

With M, L and T alone, the method fixes at most three exponents.

✏️ Example 4 — How fast does a raindrop wobble?
A small liquid drop, disturbed, oscillates about its spherical shape. Its frequency $\nu$ is expected to depend on the density $\rho$ of the liquid, the radius $r$ of the drop and the surface tension $S$ (force per unit length). Find the form of the relation. By what factor does the frequency change if the radius is doubled?
Find the factor $\nu_{\text{new}}/\nu_{\text{old}}$ when the radius is doubled:
Assume $\nu=k\rho^ar^bS^c$: $[\text{T}^{-1}]=[\text{M}\text{L}^{-3}]^a[\text{L}]^b[\text{M}\text{T}^{-2}]^c=[\text{M}^{a+c}\text{L}^{-3a+b}\text{T}^{-2c}]$.
Equate T: $-2c=-1$, so $c=\tfrac12$. M: $a+c=0$, so $a=-\tfrac12$. L: $-3a+b=0$, so $b=-\tfrac32$.
Result $\nu=k\sqrt{\dfrac{S}{\rho r^3}}$. Doubling $r$ multiplies $\nu$ by $2^{-3/2}=\dfrac{1}{2.83}$: the frequency falls to about $0.35$ of its value.
Check A stiffer surface (larger $S$) makes the drop vibrate faster, and a heavier liquid slower — as a spring and mass would. Interactive 1 solves this case step by step.

The escape speed is to be written as $v=k\,G^aM^bR^c$. Take $a=b=\tfrac12$. Which power $c$ of the radius makes the formula balance?

Choose the problem "escape speed v(G, M, R)", then set $a=0.5$, $b=0.5$ and try values of $c$. Only $c=-0.5$ puts all three dots on their marks: the readouts show needed $[v]=[\text{L}\,\text{T}^{-1}]$, formula gives $[\text{L}\,\text{T}^{-1}]$, status "balanced ✓", formula $v\propto G^{1/2}M^{1/2}R^{-1/2}$. The M and T rows are already balanced by $a$ and $b$; the L row needs $3a+c=1$, so $c=-\tfrac12$. With $c=+\tfrac12$ the formula gives $[\text{L}^2\text{T}^{-1}]$ — the student's wrong $\sqrt{GMR}$ of Exercise II.7. The result is $v=k\sqrt{GM/R}$ (theory gives $k=\sqrt2$).
Interactive 1 — Balancing the Dimensions

Choose a problem and set the three exponents with the sliders. Each row is one base dimension; the coloured segments show how much each factor contributes to the power of M, L or T on the right-hand side, the dot is their total and the purple mark is the power the left-hand side needs. A correct formula makes every dot land on its mark. Press Play to watch the method of dimensions solve each problem one equation at a time.

000
needed (left side)—
formula gives—
formula—
status—
✏️ Example 5 — A different choice of base quantities
Suppose speed $[V]$, time $[T]$ and force $[F]$ are chosen as the fundamental quantities instead of mass, length and time. Find the dimensions of (a) mass, (b) energy, (c) pressure in the new system.
Method Write the unknown as $F^xV^yT^z$ and match powers of M, L, T using $[F]=[\text{M}\text{L}\text{T}^{-2}]$, $[V]=[\text{L}\text{T}^{-1}]$.
(a) Mass: $[\text{M}]=[\text{M}^x\text{L}^{x+y}\text{T}^{-2x-y+z}]$ gives, from M, $x=1$; from L, $x+y=0$, so $y=-1$; from T, $-2x-y+z=0$, so $z=2x+y=1$. So $[m]=[FV^{-1}T]$ — exactly $m=\dfrac{F}{a}=\dfrac{Ft}{v}$.
(b) Energy $=$ force $\times$ distance $=$ force $\times$ speed $\times$ time: $[E]=[FVT]$.
(c) Pressure $=$ force/area, and an area is $(\text{speed}\times\text{time})^2$: $[p]=[FV^{-2}T^{-2}]$.
⏱ Shortcut Rather than solving three equations, write a physical formula that uses only the new base quantities ($m=Ft/v$, $E=Fvt$) and read off the powers.

The method of dimensions gives the speed of a wave on a string as $v=k\sqrt{T/\mu}$. If the tension $T$ is made four times as large (same string), the speed

Converting units between systems; limits of the method

A quantity is the same whatever units are used: $n_1u_1=n_2u_2$ (Section 1.1). If the quantity has dimensions $[\text{M}^a\text{L}^b\text{T}^c]$, its unit is $u=[\text{M}]^a[\text{L}]^b[\text{T}]^c$ built from the units of mass, length and time of the system, and the conversion follows at once.

📐 Principle 1.8 — Converting a numerical value between systems

Let a quantity with dimensions $[\text{M}^a\text{L}^b\text{T}^c]$ have numerical value $n_1$ in a system whose units of mass, length and time are $M_1$, $L_1$, $T_1$. In a second system with units $M_2$, $L_2$, $T_2$, its numerical value is

$$n_2=n_1\left(\frac{M_1}{M_2}\right)^{a}\left(\frac{L_1}{L_2}\right)^{b}\left(\frac{T_1}{T_2}\right)^{c}.$$

Each ratio is a pure number (both units expressed in the same unit). The same pattern extends to current and temperature.

✏️ Example 6 — Joules, ergs and a home-made system
(a) Convert $1\ \text{J}$ to ergs (the CGS unit of energy, $\text{g cm}^2\text{s}^{-2}$). (b) Convert $G=6.67\times10^{-11}\ \text{N m}^2\text{kg}^{-2}$ to CGS units. (c) In a system with unit of mass $10\ \text{kg}$, unit of length $1\ \text{km}$ and unit of time $1\ \text{min}$, find the numerical values of $1\ \text{J}$ and of $1\ \text{W}$.
Do part (c) yourself first:
(a) $[E]=[\text{M}\text{L}^2\text{T}^{-2}]$: $n_2=1\times\left(\dfrac{1\ \text{kg}}{1\ \text{g}}\right)\left(\dfrac{1\ \text{m}}{1\ \text{cm}}\right)^2\left(\dfrac{1\ \text{s}}{1\ \text{s}}\right)^{-2}=10^3\times10^4=10^7$. So $1\ \text{J}=10^7\ \text{erg}$.
(b) $[G]=[\text{M}^{-1}\text{L}^3\text{T}^{-2}]$: $n_2=6.67\times10^{-11}\times(10^3)^{-1}\times(10^2)^3=6.67\times10^{-8}\ \text{dyn cm}^2\text{g}^{-2}$.
(c) $1\ \text{J}$: $n_2=\left(\dfrac{1}{10}\right)\left(\dfrac{1}{1000}\right)^2\left(\dfrac{1}{60}\right)^{-2}=0.1\times10^{-6}\times3600=3.6\times10^{-4}$. $1\ \text{W}$ ($[\text{M}\text{L}^2\text{T}^{-3}]$): $n_2=0.1\times10^{-6}\times60^3=2.16\times10^{-2}$.
Check The new units of mass and length are much larger, so the numbers are much smaller; the larger time unit works the other way, because time appears with a negative power. Interactive 2 shows the three factors separately.

Express a pressure of $1\ \text{Pa}$ in a system whose units are the tonne, the kilometre and the hour. Roughly what is the new numerical value?

Choose quantity "pressure, 1 Pa", mass unit tonne, length unit km, time unit h. The chart shows a mass factor $\times1.00\times10^{-3}$ and a length factor $\times1.00\times10^{3}$ (they do cancel, because $[p]=[\text{M}\text{L}^{-1}\text{T}^{-2}]$), but then the time factor $\left(\tfrac{1\ \text{s}}{1\ \text{h}}\right)^{-2}=\times1.30\times10^{7}$. The readouts give new value $1.30\times10^{7}$ and overall factor $\times1.30\times10^{7}$. Time enters with the power $-2$, so a much larger time unit makes the number much larger; $7.7\times10^{-8}$ is what you get with the time ratio upside down.
Interactive 2 — One Quantity, Many Systems of Units

Pick a quantity and a new unit of mass, length and time. The chart follows Principle 1.8 on a logarithmic scale: starting from the SI value, the mass, length and time factors each multiply the number by $(\text{old unit}/\text{new unit})^{\text{power}}$ — an arrow to the right multiplies by a power of ten, to the left divides. Press Play to tour some famous and some invented systems.

dimensions—
SI value—
new value—
overall factor—
⚠️ What dimensional analysis cannot do

1. No numbers. It cannot find dimensionless constants: the $2\pi$ in $T=2\pi\sqrt{l/g}$, the $\tfrac12$ in $\tfrac12mv^2$, the $6\pi$ in Stokes' law.

2. No sums. It cannot derive a relation with several terms, such as $s=ut+\tfrac12at^2$; it can only check one.

3. No special functions. It cannot produce trigonometric, exponential or logarithmic dependences ($x=A\sin\omega t$, $N=N_0e^{-\lambda t}$).

4. Too many variables. With M, L, T it fixes at most three exponents; if $Q$ depends on four or more mechanical quantities, the method alone is not enough.

5. Same dimensions, different quantities. Work and torque, or stress and pressure, share dimensions; the method cannot tell them apart, nor say whether a quantity is a scalar or a vector.

✏️ Example 7 — NEET-style: answer from definitions, not from long formulas
(a) Which pair of quantities has the same dimensions? (A) work and power (B) stress and strain (C) impulse and linear momentum (D) torque and angular momentum
(b) The speed of a particle varies with time as $v=At+\dfrac{Bt^2}{C+t}$. The dimensions of $B$ are (A) $[\text{L}\text{T}^{-3}]$ (B) $[\text{L}\text{T}^{-2}]$ (C) $[\text{L}\text{T}^{-1}]$ (D) $[\text{L}]$
Before you open the solution, find the power of $\text{T}$ in $[B]$ for part (b):
(a) Relations Link each pair by the relation that defines one in terms of the other: power $=$ work ÷ time (differ by $\text{T}$); strain is a ratio of lengths, stress is a force per area (one dimensionless, one not); impulse $=$ change of momentum (the same); angular momentum $=$ torque × time (differ by $\text{T}$).
Answer (a) (C) impulse and linear momentum.
(b) Homogeneity $C$ is added to $t$, so $[C]=[\text{T}]$ and $C+t$ is a time. Then $\dfrac{Bt^2}{C+t}$ has the dimensions of $B\cdot t$, and must be a speed: $[B]=\dfrac{[\text{L}\text{T}^{-1}]}{[\text{T}]}=[\text{L}\text{T}^{-2}]$.
Answer (b) (B) $[\text{L}\text{T}^{-2}]$ — the same as $[A]$.
⏱ Shortcut In (a), a pair is the same only if one quantity equals the other times a pure number; any extra factor of time, length or mass rules it out — no dimensional formula needs writing. In (b), (A) is the trap for anyone who divides by $t^2$ but forgets the $t$ underneath.
⚠️ NEET traps

1. "Dimensionally correct" is not "correct". An equation that fails the test is certainly wrong; one that passes may still be wrong by a factor such as $2$ or $\pi$ ($s=ut+at^2$ passes). Statement and assertion–reason questions test exactly this sentence.

2. Inverting the conversion. $n_2=n_1(M_1/M_2)^a\cdots$ — old unit over new unit. A larger new unit gives a smaller number when its power is positive; if your answer goes the other way, the ratio is upside down.

3. Forgetting negative powers. Time usually appears as $\text{T}^{-1}$, $\text{T}^{-2}$, $\text{T}^{-3}$. Changing seconds to minutes multiplies the numerical value of an acceleration by $3600$.

4. Arguments of functions. In $y=A\sin(\omega t-kx)$ the bracket is dimensionless, so $[\omega]=[\text{T}^{-1}]$ and $[k]=[\text{L}^{-1}]$; in $e^{-t/\tau}$, $[\tau]=[\text{T}]$. A constant added to $t$ or $x$ has the dimensions of $t$ or $x$.

5. Same dimensions, different quantities. Learn the families: work, energy, heat and torque; pressure, stress, Young's modulus and energy density; angular momentum and Planck's constant; impulse and momentum; frequency, angular velocity and velocity gradient. "Which pair has the same dimensions?" is one of NEET's most frequent questions on this section. Angle, strain and refractive index are dimensionless — and an angle still has a unit, the radian.

6. Electrical dimensions. Build them from $q=It$ and $V=W/q$, not from memory; for $\varepsilon_0$ and $\mu_0$ use $\varepsilon_0\mu_0=1/c^2$ as a check.

Which of these relations could the method of dimensions derive completely, apart from a dimensionless constant?

Exercises

Write dimensions in the form $[\text{M}^a\text{L}^b\text{T}^c\ldots]$. Quantities are in SI unless stated.

I
Dimensional formulas.
  • 1 Find the dimensions of (a) impulse, (b) power, (c) pressure, (d) surface tension.
  • 2 Find the dimensions of the spring constant $k$ (from $F=-kx$) and of $k/m$. Which quantity has the dimensions of $k/m$?
  • 3 Find the dimensions of latent heat and of specific heat capacity.
  • 4 Find the dimensions of the gas constant $R$ in $pV=nRT$.
  • 5 The power radiated by a hot body is $P=\sigma AT^4$. Find the dimensions of $\sigma$.
  • 6 Find the dimensions of electric field ($E=F/q$) and of electric potential ($V=W/q$).
  • 7 Show that $E/B$ has the dimensions of a speed ($F=qvB$ defines $B$).
  • 8 Show that the product $RC$ of a resistance and a capacitance has the dimensions of time.
  • 9 Which pairs have the same dimensions? (a) work and torque (b) angular momentum and Planck constant (c) stress and Young's modulus (d) impulse and force.
1 (a) $[\text{M}\text{L}\text{T}^{-1}]$ (b) $[\text{M}\text{L}^2\text{T}^{-3}]$ (c) $[\text{M}\text{L}^{-1}\text{T}^{-2}]$ (d) $[\text{M}\text{T}^{-2}]$.
2 $[k]=\dfrac{[\text{M}\text{L}\text{T}^{-2}]}{[\text{L}]}=[\text{M}\text{T}^{-2}]$; $[k/m]=[\text{T}^{-2}]$ — the square of an angular frequency, $\omega^2$.
3 Latent heat $Q/m$: $[\text{L}^2\text{T}^{-2}]$. Specific heat $Q/(m\Delta T)$: $[\text{L}^2\text{T}^{-2}\text{K}^{-1}]$.
4 $[R]=\dfrac{[pV]}{[n][T]}=[\text{M}\text{L}^2\text{T}^{-2}\text{K}^{-1}\text{mol}^{-1}]$.
5 $[\sigma]=\dfrac{[\text{M}\text{L}^2\text{T}^{-3}]}{[\text{L}^2][\text{K}^4]}=[\text{M}\text{T}^{-3}\text{K}^{-4}]$.
6 $[E]=\dfrac{[\text{M}\text{L}\text{T}^{-2}]}{[\text{A}\text{T}]}=[\text{M}\text{L}\text{T}^{-3}\text{A}^{-1}]$; $[V]=\dfrac{[\text{M}\text{L}^2\text{T}^{-2}]}{[\text{A}\text{T}]}=[\text{M}\text{L}^2\text{T}^{-3}\text{A}^{-1}]$.
7 $[B]=\dfrac{[F]}{[q][v]}=[\text{M}\text{T}^{-2}\text{A}^{-1}]$; $\left[\dfrac EB\right]=\dfrac{[\text{M}\text{L}\text{T}^{-3}\text{A}^{-1}]}{[\text{M}\text{T}^{-2}\text{A}^{-1}]}=[\text{L}\text{T}^{-1}]$ ✓.
8 $[R]=[\text{M}\text{L}^2\text{T}^{-3}\text{A}^{-2}]$, $[C]=[\text{M}^{-1}\text{L}^{-2}\text{T}^4\text{A}^2]$; product $[\text{T}]$ ✓.
9 (a), (b) and (c) match; (d) does not: impulse $[\text{M}\text{L}\text{T}^{-1}]$, force $[\text{M}\text{L}\text{T}^{-2}]$.
II
Checking equations with the principle of homogeneity.
  • 1 Check $v=u+at$.
  • 2 Check $s=ut+\tfrac12at^2$.
  • 3 A student writes the kinetic energy as $K=\tfrac12mv^3$. Show that it is wrong.
  • 4 Check the speed of a transverse wave on a string, $v=\sqrt{T/\mu}$, where $T$ is the tension and $\mu$ the mass per unit length.
  • 5 A mass $m$ on a spring of constant $k$ oscillates with period $T=2\pi\sqrt{m/k}$. Check this, and show that $T=2\pi\sqrt{k/m}$ is impossible.
  • 6 Check that the bracket in $y=A\sin\left[2\pi\left(\dfrac{t}{T}-\dfrac{x}{\lambda}\right)\right]$ is dimensionless ($T$ period, $\lambda$ wavelength).
  • 7 A student writes the escape speed as $v=\sqrt{2GMR}$. Show that it is wrong and suggest a dimensionally correct form.
  • 8 The speed of sound in a gas is $v=\sqrt{\gamma p/\rho}$, with $\gamma$ a ratio of two heat capacities. Check it, and give an example of an equation that is dimensionally correct but physically wrong.
1 $[v]=[u]=[\text{L}\text{T}^{-1}]$, $[at]=[\text{L}\text{T}^{-2}][\text{T}]=[\text{L}\text{T}^{-1}]$ ✓.
2 $[s]=[ut]=[at^2]=[\text{L}]$ ✓.
3 $[mv^3]=[\text{M}\text{L}^3\text{T}^{-3}]\ne[\text{M}\text{L}^2\text{T}^{-2}]$: wrong.
4 $\left[\dfrac{T}{\mu}\right]=\dfrac{[\text{M}\text{L}\text{T}^{-2}]}{[\text{M}\text{L}^{-1}]}=[\text{L}^2\text{T}^{-2}]$, whose square root is a speed ✓.
5 $\left[\dfrac mk\right]=\dfrac{[\text{M}]}{[\text{M}\text{T}^{-2}]}=[\text{T}^2]$, square root $[\text{T}]$ ✓. $\sqrt{k/m}$ has dimensions $[\text{T}^{-1}]$ — a frequency, not a period.
6 $t/T$ and $x/\lambda$ are each a ratio of like quantities: dimensionless ✓.
7 $[GMR]=[\text{M}^{-1}\text{L}^3\text{T}^{-2}][\text{M}][\text{L}]=[\text{L}^4\text{T}^{-2}]$, so $\sqrt{GMR}$ is $[\text{L}^2\text{T}^{-1}]$, not a speed. $\sqrt{2GM/R}$ gives $[\text{L}\text{T}^{-1}]$ ✓.
8 $\left[\dfrac p\rho\right]=\dfrac{[\text{M}\text{L}^{-1}\text{T}^{-2}]}{[\text{M}\text{L}^{-3}]}=[\text{L}^2\text{T}^{-2}]$ ✓. Example: $s=ut+at^2$ passes the test but is wrong by the factor $\tfrac12$.
III
Dimensions of constants.
  • 1 $x=a+bt+ct^2$, with $x$ in metres and $t$ in seconds. Find the dimensions of $a$, $b$, $c$.
  • 2 A speed varies as $v=\dfrac{\alpha}{t}+\beta t^2$. Find the dimensions of $\alpha$ and $\beta$.
  • 3 A force depends on a distance $x$ as $F=ax+bx^2$. Find the dimensions of $a$ and $b$.
  • 4 A pressure is given by $P=\dfrac{a-t^2}{bx}$, with $t$ a time and $x$ a distance. Find the dimensions of $a$ and $b$.
  • 5 In $y=A\sin(\omega t-kx)$, find the dimensions of $\omega$, $k$ and $\omega/k$.
  • 6 The energy of two molecules a distance $r$ apart is $U=\dfrac{A}{r^{12}}-\dfrac{B}{r^6}$. Find the dimensions of $A$, $B$ and $A/B$.
  • 7 The drag force on a car is $F=\tfrac12C_D\rho Av^2$, with $\rho$ the air density and $A$ the frontal area. Show that $C_D$ is dimensionless.
  • 8 In diffusion, the number of particles crossing unit area per unit time is $J=-D\,\dfrac{n_2-n_1}{x_2-x_1}$, where $n$ is a number of particles per unit volume. Find the dimensions of $D$.
1 $[a]=[\text{L}]$, $[b]=[\text{L}\text{T}^{-1}]$, $[c]=[\text{L}\text{T}^{-2}]$.
2 $[\alpha]=[v][t]=[\text{L}]$; $[\beta]=[v]/[t^2]=[\text{L}\text{T}^{-3}]$.
3 $[a]=[\text{M}\text{T}^{-2}]$; $[b]=[\text{M}\text{L}^{-1}\text{T}^{-2}]$.
4 $a$ is subtracted from $t^2$: $[a]=[\text{T}^2]$. Then $[b]=\dfrac{[\text{T}^2]}{[P][x]}=\dfrac{[\text{T}^2]}{[\text{M}\text{L}^{-1}\text{T}^{-2}][\text{L}]}=[\text{M}^{-1}\text{T}^4]$.
5 $[\omega]=[\text{T}^{-1}]$, $[k]=[\text{L}^{-1}]$, $[\omega/k]=[\text{L}\text{T}^{-1}]$ — the wave speed.
6 $[A]=[U][r^{12}]=[\text{M}\text{L}^{14}\text{T}^{-2}]$, $[B]=[\text{M}\text{L}^8\text{T}^{-2}]$, $[A/B]=[\text{L}^6]$.
7 $[\rho Av^2]=[\text{M}\text{L}^{-3}][\text{L}^2][\text{L}^2\text{T}^{-2}]=[\text{M}\text{L}\text{T}^{-2}]=[F]$, so $C_D$ has no dimensions.
8 $[J]=[\text{L}^{-2}\text{T}^{-1}]$, $\left[\dfrac{\Delta n}{\Delta x}\right]=[\text{L}^{-4}]$, so $[D]=[\text{L}^2\text{T}^{-1}]$.
IV
Deducing relations and converting units.
  • 1 The period $T$ of a simple pendulum may depend on the mass $m$ of the bob, the length $l$ and $g$. Find the form of the relation. Does the mass matter?
  • 2 The speed $v$ of a wave on a string depends on the tension $T$ and the mass per unit length $\mu$. Find the form of the relation.
  • 3 The drag force $F$ on a small sphere moving slowly through a fluid depends on the viscosity $\eta$, the radius $r$ and the speed $v$. Find the relation.
  • 4 (Modelling) Reproduce Taylor's result: the radius $R$ of a blast wave depends on the energy $E$, the time $t$ and the air density $\rho$.
  • 5 The force $F$ needed to keep a mass $m$ moving at speed $v$ on a circle of radius $r$ depends on $m$, $v$ and $r$. Find the form of $F$.
  • 6 Combine $h$, $G$ and $c$ into a length (the Planck length) and evaluate it. ($h=6.63\times10^{-34}\ \text{J s}$, $G=6.67\times10^{-11}\ \text{N m}^2\text{kg}^{-2}$, $c=3.00\times10^8\ \text{m/s}$.)
  • 7 Convert $1\ \text{N}$ to dynes and $1\ \text{Pa}$ to $\text{dyn/cm}^2$.
  • 8 Find the numerical value of $g=9.8\ \text{m/s}^2$ in a system whose unit of length is $1\ \text{km}$ and unit of time $1\ \text{min}$.
  • 9 In a new system the unit of force is $100\ \text{N}$, the unit of length $10\ \text{m}$ and the unit of time $100\ \text{s}$. What is the unit of mass, in kg?
  • 10 The viscosity of water is about $1.0\times10^{-3}\ \text{Pa s}$. Express it in poise (the CGS unit, $\text{g cm}^{-1}\text{s}^{-1}$).
1 $T=km^al^bg^c$: M: $a=0$; T: $-2c=1$, $c=-\tfrac12$; L: $b+c=0$, $b=\tfrac12$. $T=k\sqrt{l/g}$; the mass does not appear.
2 $v=kT^a\mu^b$: M: $a+b=0$; T: $-2a=-1$; so $a=\tfrac12$, $b=-\tfrac12$: $v=k\sqrt{T/\mu}$ (L: $a-b=1$ ✓).
3 $F=k\eta^ar^bv^c$: M: $a=1$; T: $-a-c=-2$, $c=1$; L: $-a+b+c=1$, $b=1$. $F=k\eta rv$ (theory gives $k=6\pi$).
4 $R=kE^at^b\rho^c$: M: $a+c=0$; L: $2a-3c=1$; T: $-2a+b=0$. So $a=\tfrac15$, $c=-\tfrac15$, $b=\tfrac25$: $R=k\left(\dfrac{Et^2}{\rho}\right)^{1/5}$.
5 $F=km^av^br^c$: M: $a=1$; T: $-b=-2$; L: $b+c=1$, $c=-1$. $F=k\dfrac{mv^2}{r}$ (with $k=1$).
6 $l=h^xG^yc^z$ gives $x=y=\tfrac12$, $z=-\tfrac32$: $l_P=\sqrt{\dfrac{hG}{c^3}}=\sqrt{\dfrac{6.63\times10^{-34}\times6.67\times10^{-11}}{2.70\times10^{25}}}=4.05\times10^{-35}\ \text{m}$.
7 $1\ \text{N}=10^3\times10^2=10^5\ \text{dyn}$; $1\ \text{Pa}=10^3\times(10^2)^{-1}=10\ \text{dyn/cm}^2$.
8 $n_2=9.8\times\left(\dfrac{1}{1000}\right)\times\left(\dfrac{1}{60}\right)^{-2}=9.8\times10^{-3}\times3600=35$ (units of $\text{km/min}^2$, 2 s.f.).
9 $m=\dfrac{F}{a}=\dfrac{FT^2}{L}$: unit of mass $=\dfrac{100\times100^2}{10}\ \text{kg}=1.0\times10^5\ \text{kg}$.
10 $[\eta]=[\text{M}\text{L}^{-1}\text{T}^{-1}]$: $n_2=1.0\times10^{-3}\times10^3\times(10^2)^{-1}=1.0\times10^{-2}\ \text{poise}$ (one centipoise).
🎯 Exam corner NEET · MCQ

E1. NEET · MCQ Match List-I with List-II.
List-I: (a) Planck's constant (b) coefficient of viscosity (c) surface tension (d) gravitational constant
List-II: (i) $[\text{M}\text{L}^{-1}\text{T}^{-1}]$ (ii) $[\text{M}\text{L}^{2}\text{T}^{-1}]$ (iii) $[\text{M}^{-1}\text{L}^{3}\text{T}^{-2}]$ (iv) $[\text{M}\text{T}^{-2}]$
Choose the correct answer: (A) a-ii, b-iv, c-i, d-iii (B) a-ii, b-i, c-iv, d-iii (C) a-i, b-ii, c-iv, d-iii (D) a-iii, b-i, c-iv, d-ii

Surest first The gravitational constant is the only quantity with a negative power of mass ($G=Fr^2/m^2$): (d)-(iii). That removes (D).
Next Surface tension is force per length, $[\text{M}\text{T}^{-2}]$: (c)-(iv), which removes (A). Planck's constant $E/\nu$ is $[\text{M}\text{L}^2\text{T}^{-1}]$: (a)-(ii), which removes (C). Viscosity is then (i), as Stokes' law confirms (Example 1).
Answer (B) a-ii, b-i, c-iv, d-iii.
⏱ Shortcut Three facts you know cold eliminated three options; the fourth match never had to be derived.

E2. NEET · MCQ Assertion (A): The equation $v^2=u^2+as$, for a body moving with uniform acceleration $a$, is dimensionally correct. Reason (R): An equation that is dimensionally correct is always physically correct. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Assertion $[v^2]=[u^2]=[\text{L}^2\text{T}^{-2}]$ and $[as]=[\text{L}\text{T}^{-2}][\text{L}]=[\text{L}^2\text{T}^{-2}]$: dimensionally correct, so A is true (even though the correct relation has $2as$).
Reason The equation in A is itself a counter-example: it is dimensionally correct but physically wrong by the factor $2$. Dimensions cannot see dimensionless numbers (Principle 1.6, part 3). R is false.
Answer (C).

E3. NEET · MCQ Statement I: If the units of length and of time are both doubled, the numerical value of a given acceleration is doubled. Statement II: If the units of mass, length and time are all doubled, the numerical value of a given force is unchanged. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement I $[a]=[\text{L}\text{T}^{-2}]$: by Principle 1.8, $n_2=n_1\left(\tfrac12\right)^{1}\left(\tfrac12\right)^{-2}=2n_1$. Correct.
Statement II $[F]=[\text{M}\text{L}\text{T}^{-2}]$: $n_2=n_1\left(\tfrac12\right)\left(\tfrac12\right)\left(\tfrac12\right)^{-2}=n_1$. Correct.
Answer (A).
⏱ Shortcut If every base unit is multiplied by the same factor $k$, the numerical value changes by $k^{-(a+b+c)}$. For force $a+b+c=1+1-2=0$, so nothing changes.

E4. NEET · MCQ How many of the following quantities have the dimensions $[\text{M}\text{L}^2\text{T}^{-2}]$?
work, torque, power, kinetic energy, heat, angular momentum, (pressure × volume)
(A) Three (B) Four (C) Five (D) Six

Check each Work ✓, torque ✓ ($rF$), power ✗ ($[\text{M}\text{L}^2\text{T}^{-3}]$), kinetic energy ✓, heat ✓ (an energy), angular momentum ✗ ($[\text{M}\text{L}^2\text{T}^{-1}]$), pressure × volume ✓ ($[\text{M}\text{L}^{-1}\text{T}^{-2}][\text{L}^3]$).
Answer (C) five.
⏱ Shortcut $pV$ is the one most often missed: remember $pV=nRT$ — it is an energy, as Result 1.7 lists.

E5. NEET · MCQ The period $t$ of a satellite orbiting just above the surface of a planet is found to depend only on the mean density $\rho$ of the planet and the gravitational constant $G$. By the method of dimensions, $t$ is proportional to (A) $\sqrt{G\rho}$ (B) $\dfrac{1}{\sqrt{G\rho}}$ (C) $\dfrac{1}{G\rho}$ (D) $\sqrt{\dfrac{\rho}{G}}$

Assume $t=k\rho^aG^b$: $[\text{T}]=[\text{M}\text{L}^{-3}]^a[\text{M}^{-1}\text{L}^3\text{T}^{-2}]^b$.
Equate T: $-2b=1$, so $b=-\tfrac12$. M: $a-b=0$, so $a=-\tfrac12$ (L: $-3a+3b=0$ ✓).
Answer (B) $t\propto(G\rho)^{-1/2}$.
⏱ Shortcut $[G\rho]=[\text{T}^{-2}]$ — worth remembering — so a time must be $(G\rho)^{-1/2}$. A surprise to enjoy: the period of a surface-skimming satellite does not depend on the planet's size at all, only on its density (theory gives $t=\sqrt{3\pi/(G\rho)}$, about $84$ minutes for the Earth).

E6. NEET · MCQ In a system of units the unit of mass is $2\ \text{kg}$, the unit of length is $4\ \text{m}$ and the unit of time is $2\ \text{s}$. A pressure of $8\ \text{Pa}$, expressed in this system, has the numerical value (A) $1$ (B) $16$ (C) $4$ (D) $64$

Formula $[p]=[\text{M}\text{L}^{-1}\text{T}^{-2}]$: $n_2=8\left(\dfrac{1\ \text{kg}}{2\ \text{kg}}\right)^{1}\left(\dfrac{1\ \text{m}}{4\ \text{m}}\right)^{-1}\left(\dfrac{1\ \text{s}}{2\ \text{s}}\right)^{-2}=8\times\tfrac12\times4\times4$.
Answer (D) $64$.
⏱ Shortcut Build the new unit: $1\ \text{new unit}=\dfrac{2\ \text{kg}}{(4\ \text{m})(2\ \text{s})^2}=0.125\ \text{Pa}$, and $8\div0.125=64$. (A) turns every ratio upside down; (B) forgets the time factor.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. How long does a bottle take to drain through a hole in its base — and how much of the answer can dimensional analysis predict before you do the experiment?

Why it matters. Draining times matter for water tanks and irrigation channels, fuel tanks, industrial hoppers and the gravity drips used in hospitals. Engineers routinely use dimensional analysis to plan such experiments and to scale results from small models to full-size systems, as in wind tunnels and ship-model basins.

What to do.

  1. Predict. For a given bottle and hole, the drain time $t$ can depend on the initial water height $h$ and on $g$ (the water's density cancels, because gravity drives the flow and the water's mass resists it). Show by dimensions that $t=k\sqrt{h/g}$ for a fixed bottle-to-hole shape, so $t\propto\sqrt h$.
  2. Build. Make a hole of about $5\ \text{mm}$ in the base of a straight-sided plastic bottle. Mark heights of $5$, $10$, $15$, $20$ and $25\ \text{cm}$ above the hole.
  3. Measure. Fill to each mark, release, and time how long the water takes to stop flowing; repeat three times and average.
  4. Test. Plot $\log t$ against $\log h$. Is the slope close to $0.5$? Then repeat with a hole of twice the diameter and compare the times at the same $h$ — this ratio is outside what dimensions alone can tell you.

Tools: Plastic bottles, a heated nail or drill for the holes, a ruler, a phone stopwatch, a sink; a spreadsheet for the log–log plot.

Hand in: Your dimensional prediction, a results table with significant figures matched to your stopwatch and ruler, the log–log graph with its slope, and a paragraph on what the hole-size experiment adds.

Going further. Theory based on Bernoulli's principle (Chapter 7) gives $t=\left(\dfrac{D}{d}\right)^2\sqrt{\dfrac{2h}{g}}$ for a bottle of diameter $D$ and a hole of diameter $d$, times a correction near $1.6$ for the narrowing jet. Compare your hole-size ratio with the predicted factor of $4$.

Instructor note: slopes of $0.45$–$0.55$ are typical. Very small holes ($2\ \text{mm}$ or less) drain more slowly than predicted, because viscosity and surface tension bring in new dimensionless numbers — a good way to show limitation 4 of the method in practice. Doubling $d$ usually cuts the time by a factor of $3.5$–$4$.

🧪 Self-check quiz

0/5 correct

Q1. Planck's constant has the same dimensions as

Q2. Which of these quantities is dimensionless?

Q3. The quantity $\dfrac{1}{\sqrt{\mu_0\varepsilon_0}}$ has the dimensions of

Q4. The dimensional formula of the coefficient of viscosity is

Q5. In the wave equation $y=A\sin(\omega t-kx)$, with $t$ a time and $x$ a distance, the quantity $\omega/k$ has the dimensions of