Chapter 8 ยท Introduction

Chapter 8 โ€” Thermodynamics

Thermodynamics keeps the accounts of energy. The zeroth law defines temperature, the first law $Q=\Delta U+W$ balances heat, work and internal energy in every process of a gas, and the second law decides which way energy is willing to flow โ€” and caps every engine at the Carnot efficiency $1-T_2/T_1$.

A diesel engine has no spark plug. It squeezes air so quickly to about a twentieth of its volume that the air becomes hot enough โ€” several hundred degrees Celsius โ€” to ignite the fuel sprayed into it. A bicycle pump grows warm after a few hard strokes for the same reason. A refrigerator does the opposite trick, pushing heat out of a cold box into a warmer kitchen, but only while it is plugged in. And every thermal power station, however modern, throws away more energy as warm water and exhaust than it delivers as electricity. Why can heat not be turned completely into work? Why does compressing a gas quickly heat it while compressing it slowly need not? How good can an engine possibly be?

Thermodynamics answers these questions without looking at a single molecule, using a few state variables โ€” pressure, volume, temperature, internal energy โ€” and three laws. The zeroth law gives temperature its meaning. The first law, $Q=\Delta U+W$, is the conservation of energy with heat included: the heat put into a system goes partly into its internal energy and partly into the work it does, and that work is the area under its path on a $p$โ€“$V$ diagram. Applied to an ideal gas it gives the four standard processes โ€” isochoric, isobaric, isothermal and adiabatic โ€” and the cycles built from them. The second law then says which processes can actually happen, separates reversible from irreversible ones, and sets the ceiling every engine must live under, the Carnot efficiency $\eta=1-\dfrac{T_2}{T_1}$.

These are not only exam ideas. Vaccines travel from the factory to a village clinic inside a "cold chain" of refrigerators and insulated boxes kept between $2$ and $8\ ^\circ\text{C}$ โ€” every link a machine that pays in electrical work to push heat out of a cold space, exactly as the second law demands. Hospitals sterilise instruments with steam under pressure, and the valve of a cylinder of compressed medical gas can frost over when the gas flows out fast, because the expanding gas does work and cools. Your own body is a busy energy account too: of the energy released from food, only a fraction becomes mechanical work in the muscles, and the rest leaves as heat โ€” which is why you get hot when you exercise.

NEET asks about this chapter every year, almost always as short MCQs: the signs in $Q=\Delta U+W$, state and path functions, work as an area on a $p$โ€“$V$ graph, $C_p-C_V=R$ and $\gamma$, isothermal and adiabatic changes compared, the net work of a cycle, the efficiency of a Carnot engine, and statements of the zeroth, first and second laws to be judged. The NEET (UG) syllabus for this unit โ€” thermal equilibrium, the zeroth law of thermodynamics and the concept of temperature; heat, work and internal energy; the first law of thermodynamics; isothermal and adiabatic processes; and the second law of thermodynamics with reversible and irreversible processes โ€” is covered completely by the three sections below, together with the heat capacities, cycles and the Carnot engine needed to use those laws.

Thermal equilibriumโ†’Zeroth law & temperatureโ†’Heat, work, internal energyโ†’$W=\displaystyle\int p\,dV$โ†’First law $Q=\Delta U+W$โ†’Four standard processesโ†’Adiabatic $pV^\gamma=\text{const}$โ†’Cyclesโ†’Second law & reversibilityโ†’Carnot $\eta=1-\tfrac{T_2}{T_1}$
๐ŸŽฏ By the end of this chapter you canโ€ฆ
  • explain thermal equilibrium, state the zeroth law, and use it to define temperature, including readings of a constant-volume gas thermometer;
  • distinguish heat, work and internal energy, treat internal energy as a state variable, and use $\Delta U=nC_V\Delta T$ for an ideal gas in any process;
  • calculate the work done by a gas as the area under its $p$โ€“$V$ path โ€” at constant pressure, along straight lines and power-law curves โ€” and recognise free expansion, where $W=0$;
  • apply the first law with consistent signs to heating, boiling, and gases pushing pistons against the atmosphere and springs;
  • find $W$, $Q$ and $\Delta U$ for isochoric, isobaric, isothermal and adiabatic processes, using $C_p-C_V=R$, $\gamma=\dfrac{C_p}{C_V}$, $pV^\gamma=\text{const}$ and $TV^{\gamma-1}=\text{const}$;
  • work round a cyclic process leg by leg, reading the net work as the enclosed area with its sign set by the direction;
  • state the second law in its Kelvinโ€“Planck and Clausius forms, tell reversible from irreversible processes, and test claims for impossible machines;
  • use the efficiency of a heat engine, the coefficient of performance of a refrigerator or heat pump, and their Carnot limits, and solve NEET multiple-choice questions that mix all three sections in every format the paper uses โ€” single answer, statement I / II, assertionโ€“reason, matching lists, "how many are correct" and graph reading โ€” quickly, by eliminating options.

In the teaser below, air ($\gamma=1.4$) in a pump at $300\ \text{K}$ and $100\ \text{kPa}$ is squeezed to one quarter of its volume so quickly that no heat has time to leave. What is its temperature just afterwards?

Set the compression ratio to $4.0$: the "fast push (adiabatic)" readout shows $T_2=522\ \text{K}$ and $p_2=696\ \text{kPa}$, and the work done on the gas is $185\ \text{J}$. With $Q=0$ the first law gives $\Delta U=-W_\text{by gas}=+185\ \text{J}$: all the work stays in the gas as internal energy, so it heats up even though no heat was supplied. Quantitatively $TV^{\gamma-1}=\text{const}$ gives $T_2=300\times4^{0.4}=522\ \text{K}$. The slow push (isothermal) stays at $300\ \text{K}$ and $400\ \text{kPa}$ because the $139\ \text{J}$ of work leaks out as heat. $1200\ \text{K}$ assumes $T\propto1/V$, which holds for neither process (at constant pressure the gas would actually cool, to $75\ \text{K}$), and $2090\ \text{K}$ uses $4^{1.4}$, which is the pressure ratio.
Teaser โ€” Pump It: Slowly or Quickly?

$1.0\ \text{L}$ of air ($\gamma=1.4$) at $100\ \text{kPa}$ and $300\ \text{K}$ is compressed to $1/r$ of its volume in two ways: slowly, so heat leaks out and the temperature stays at $300\ \text{K}$ (isothermal), or quickly, with no time for heat to leave (adiabatic). Choose the compression ratio $r$; the shaded areas are the work done on the gas.

4.0
slow push (isothermal): final stateโ€”
work on gas = heat given outโ€”
fast push (adiabatic): final stateโ€”
work on gas = rise in Uโ€”

Sections in this chapter

๐ŸŽฏ Chapter mixed test NEET ยท MCQ

Eight NEET-style questions that move between the three sections in no fixed order, as the paper does โ€” and several of them need ideas from two sections at once. Answer each one and press Submit (NEET marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press โฑ Take as a timed test. The test clock is generous: at real NEET pace โ€” about a minute per question โ€” you should finish all eight in ten minutes, so try to beat it comfortably. Throughout, $Q$ is heat given to the gas and $W$ is work done by it. Try them before you open any solution.

E1. NEET ยท MCQ One mole of a diatomic ideal gas is heated at constant pressure and its temperature rises by $20\ \text{K}$. Taking $R=8.3\ \text{J mol}^{-1}\text{K}^{-1}$, the heat absorbed by the gas is (A) $415\ \text{J}$ (B) $581\ \text{J}$ (C) $166\ \text{J}$ (D) $747\ \text{J}$

Heat capacity Diatomic: $C_V=\tfrac52R$, and Mayer's relation gives $C_p=C_V+R=\tfrac72R$ (Section 8.2).
Number $Q=nC_p\Delta T=1\times\tfrac72\times8.3\times20=581\ \text{J}$. Of this, $\Delta U=415\ \text{J}$ stays in the gas and $W=nR\Delta T=166\ \text{J}$ is done pushing back the surroundings (Section 8.1).
Answer (B) $581\ \text{J}$.
โฑ Shortcut $Q:\Delta U:W=7:5:2$: the work $nR\Delta T=166\ \text{J}$ is two parts, so one part is $83\ \text{J}$ and $Q$, seven parts, is $581\ \text{J}$. (A) is $\Delta U$ (the constant-volume heat), (C) the work alone, and (D) adds $R$ to $C_p$ once too often.

E2. NEET ยท MCQ Statement I: In a cyclic process the net heat absorbed by a system equals the net work done by it. Statement II: A heat engine working in a cycle can convert all the heat it absorbs into work, provided there is no friction. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement I Over a cycle the system returns to its initial state, so $\Delta U=0$ and the first law gives $Q_\text{net}=W_\text{net}$ (Sections 8.1 and 8.2). Correct.
Statement II The Kelvinโ€“Planck statement forbids it for every cyclic engine, frictionless or not: some heat must be rejected to a colder sink, and even a reversible engine reaches only $1-T_2/T_1$ (Section 8.3). Incorrect.
Answer (C).
โฑ Shortcut The first law balances the energy of a cycle; the second law says how it must split. "No friction" removes irreversibility, not the sink.

E3. NEET ยท MCQ Match each quantity in List-I with its expression in List-II, for $n$ moles of an ideal gas.
List-I: (a) efficiency of a Carnot engine (b) work done by the gas in a reversible adiabatic change from $T_1$ to $T_2$ (c) work done by the gas in an isothermal change from $V_1$ to $V_2$ (d) work done by the gas at constant pressure
List-II: (i) $\dfrac{nR(T_1-T_2)}{\gamma-1}$ (ii) $1-\dfrac{T_2}{T_1}$ (iii) $nR\,\Delta T$ (iv) $nRT\ln\dfrac{V_2}{V_1}$
Choose the correct answer: (A) a-ii, b-iv, c-i, d-iii (B) a-i, b-ii, c-iv, d-iii (C) a-ii, b-i, c-iii, d-iv (D) a-ii, b-i, c-iv, d-iii

Match (a) ii (Section 8.3). (b) $W=-\Delta U=nC_V(T_1-T_2)$ with $C_V=\dfrac{R}{\gamma-1}$: i. (c) The area under the hyperbola: iv. (d) $p\,\Delta V=nR\,\Delta T$: iii (Section 8.2).
Answer (D) a-ii, b-i, c-iv, d-iii.
โฑ Shortcut Only one entry is a pure number: a-ii removes (B). Only one has a logarithm, and a log means isothermal: c-iv removes (A) and (C).

E4. NEET ยท MCQ Two identical samples of an ideal gas expand quasi-statically from the same state $P$ to the same final volume $V_2$, one isothermally and one adiabatically, along the two curves shown. Which statement is correct? (A) Curve 1 is the adiabatic expansion, and more work is done along curve 1 (B) Curve 2 is the adiabatic expansion, and more work is done along curve 1 (C) Curve 2 is the adiabatic expansion, and more work is done along curve 2 (D) Curve 1 is the isothermal expansion, and equal work is done along both curves
VpVโ‚Vโ‚‚curve 1curve 2PO

Which curve Through the same point the adiabat is steeper than the isotherm by the factor $\gamma$ (Section 8.2): in an expansion it falls faster and ends lower. Curve 2 is the adiabat; curve 1 the isotherm.
Work Work is the area under each curve (Section 8.1). Curve 1 lies above curve 2 the whole way, so more work is done along curve 1 โ€” paid for by the heat the isothermal sample absorbs, while the adiabatic sample uses up its internal energy and cools.
Answer (B).
โฑ Shortcut Expansion: steeper curve, lower curve, less area. (C) reads "steeper" as "more work"; (D) thinks equal $\Delta V$ means equal work.

E5. NEET ยท MCQ Assertion (A): The air in a bicycle pump gets noticeably warmer when the pump is worked quickly. Reason (R): In an adiabatic compression, the work done on a gas increases its internal energy. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Reason $Q=0$, $W\lt0$ (work done on the gas), so $\Delta U=-W\gt0$ (Section 8.1). True.
Link A quick stroke leaves no time for heat to escape, so the compression is nearly adiabatic, and the rise in $U$ of the air is a rise in its temperature (Section 8.2). The reason explains the assertion.
Answer (A).
โฑ Shortcut "Quickly" in a question means "adiabatic". Then the first law alone decides the sign of $\Delta T$.

E6. NEET ยท MCQ $2.0\ \text{mol}$ of an ideal gas run a Carnot cycle between a source at $600\ \text{K}$ and a sink at $300\ \text{K}$, and the volume of the gas doubles during the isothermal expansion. Taking $R=8.3\ \text{J mol}^{-1}\text{K}^{-1}$ and $\ln2=0.693$, the work done by the engine per cycle is about (A) $6.90\ \text{kJ}$ (B) $4.98\ \text{kJ}$ (C) $3.45\ \text{kJ}$ (D) $10.35\ \text{kJ}$

Heat in On the isotherm at $T_1$, $\Delta U=0$ and $Q_1=W=nRT_1\ln\dfrac{V_2}{V_1}=2.0\times8.3\times600\times0.693=6.90\ \text{kJ}$ (Section 8.2).
Efficiency $\eta_\text{C}=1-\dfrac{300}{600}=0.50$ (Section 8.3), so $W=0.50\times6.90=3.45\ \text{kJ}$.
Answer (C) $3.45\ \text{kJ}$.
โฑ Shortcut $W=nR(T_1-T_2)\ln\dfrac{V_2}{V_1}=2.0\times8.3\times300\times0.693=3451\ \text{J}$. (A) is the heat taken in, (B) forgets the logarithm and (D) adds the two heats instead of subtracting them.

E7. NEET ยท MCQ How many of the following statements are correct?
(i) Two bodies each in thermal equilibrium with a third body are in thermal equilibrium with each other.
(ii) When an ideal gas expands freely into a vacuum inside an insulated vessel, its temperature falls.
(iii) The internal energy of an ideal gas depends only on its temperature.
(iv) Every adiabatic process is reversible.
(v) No engine working between two given reservoirs can be more efficient than a Carnot engine working between them.
(A) Three (B) Four (C) Two (D) Five

Check each (i) โœ“ โ€” the zeroth law (Section 8.1). (ii) โœ— โ€” $Q=0$ and $W=0$, so $\Delta U=0$ and $T$ is unchanged. (iii) โœ“ (Section 8.1). (iv) โœ— โ€” a free expansion is adiabatic but irreversible; only a quasi-static, frictionless adiabatic change is reversible (Sections 8.2 and 8.3). (v) โœ“ โ€” Carnot's theorem (Section 8.3).
Answer (A) three statements: (i), (iii) and (v).
โฑ Shortcut Both false statements are about the free expansion โ€” the one process that is adiabatic, does no work, keeps $T$ and still cannot be undone.

E8. NEET ยท MCQ In each cycle of an engine the working gas absorbs $600\ \text{J}$ of heat on one leg and gives out $450\ \text{J}$ on another; the other two legs are adiabatic. The net work per cycle and the efficiency of the engine are (A) $150\ \text{J}$ and $33\%$ (B) $1050\ \text{J}$ and $175\%$ (C) $450\ \text{J}$ and $75\%$ (D) $150\ \text{J}$ and $25\%$

Cycle $\Delta U=0$ over the cycle and the adiabatic legs exchange no heat, so $W=Q_\text{net}=600-450=150\ \text{J}$ (Sections 8.1 and 8.2).
Efficiency $\eta=\dfrac{W}{Q_1}=\dfrac{150}{600}=25\%$ โ€” divide by the heat absorbed (Section 8.3).
Answer (D).
โฑ Shortcut (A) divides by the heat rejected; (B) adds the heats and gives an efficiency above $100\%$, impossible by the first law alone; (C) is the fraction rejected.
โœ… Before you start
You need the ideas of heat and temperature, temperature scales, specific heat capacity and latent heat from Section 7.5, and pressure as force per unit area from Section 7.2. Work done by a gas is the work of a variable force read as the area under a graph (Section 4.1, Section 2.1), and the first law is the conservation of energy of Section 4.2 with heat added to the account. The chapter uses the ideal gas equation $pV=nRT$ as a given rule (it is explained from molecular motion in Section 9.1; you may know it from Class 11 Chemistry). From mathematics, recall natural logarithms and that $\displaystyle\int\frac{dV}{V}=\ln V$.