Chapter 11 · Electrostatics

11.3 Electric Potential and Potential Energy

Fields are vectors, but the work done by an electrostatic field depends only on where a charge starts and ends. That lets us describe the field by a single number at each point — the electric potential $V$, with $V=kq/r$ for a point charge, $E=-dV/dr$, and energy $U=qV$.

Lift a stone and you store energy in it; let it go and the energy comes back as motion. We never need to know the path the stone took — only how high it was lifted. Electrostatic forces behave in exactly the same way. Carry a small charge slowly from one point to another near some fixed charges, and the work you do depends only on the two end points, not on the route. So every point near the charges can be given a number — how much work per coulomb it takes to bring a charge there — and that single number, the electric potential, does the work of the whole vector field in most problems.

Potentials are scalars, so the potential of many charges is a plain sum, with no components and no angles. From the potential we can get the field back by differentiating, find the energy gained by an electron or an alpha particle, explain why the whole of a metal object sits at one potential, and work out the energy stored in an arrangement of charges or in a dipole turned in a field. In this section we build all of these ideas, which carry straight on into capacitors in § 11.4. We use the results of § 11.1 (Coulomb's law, field of a point charge, dipoles) and § 11.2 (Gauss's law, field of a charged shell) and the idea of potential energy from § 4.2. For NEET this section is a steady source of quick marks: the potential of several charges (a plain sum, with no angles), the work $q\,\Delta V$ (zero along an equipotential), the field read from a $V$–$x$ graph, the potential inside a charged shell or conductor, the energy of a pair or a triangle of charges, the energy gained by a particle in electron volts, and the work needed to turn a dipole.

Electric potential and potential difference

Recall from § 4.2 that a force is conservative when the work it does on a body moving between two points is the same for every path (equivalently, zero round any closed path). Only for such forces can a potential energy be defined. The Coulomb force of a fixed charge on a test charge is directed along the line joining them and depends only on the distance $r$ — like gravity — so the work it does depends only on the starting and finishing distances. By superposition the same holds for the field of any set of fixed charges: the electrostatic field is conservative.

Imagine an external agent moving a small positive test charge $q_0$ from $A$ to $B$ slowly, so that it gains no kinetic energy. The agent's force is then equal and opposite to the electric force $q_0\mathbf E$ at every point, and the work it does equals the increase in the electric potential energy of $q_0$. Dividing by $q_0$ removes any dependence on the test charge.

📘 Definition 11.8 — Potential difference

The potential difference between points $B$ and $A$ in an electrostatic field is the work done by an external agent, per unit positive charge, in carrying a test charge slowly (without acceleration) from $A$ to $B$:

$$V_B-V_A=\frac{W_{A\to B}}{q_0}=-\int_A^B\mathbf E\cdot d\mathbf l .$$

It does not depend on the path from $A$ to $B$ or on the size of $q_0$. Its SI unit is the volt: $1\ \text{V}=1\ \text{J/C}$.

The minus sign says that the potential falls as you move along the field. In a uniform field $E$ along $+x$, moving a distance $d$ along the field gives $V_B-V_A=-Ed$. So the field points from high potential to low potential, and the field strength can equally be quoted in $\text{V/m}$ ($1\ \text{V/m}=1\ \text{N/C}$).

📘 Definition 11.9 — Electric potential at a point; the electron volt

Choosing the potential to be zero at infinity (far from all charges), the electric potential $V$ at a point $P$ is the work done by an external agent, per unit positive charge, in bringing a test charge slowly from infinity to $P$:

$$V_P=\frac{W_{\infty\to P}}{q_0}.$$

$V$ is a scalar; it may be positive or negative. Its dimensions are $[\text{ML}^2\text{T}^{-3}\text{A}^{-1}]$. A charge $q$ at a point where the potential is $V$ has electric potential energy $U=qV$.

The electron volt is the energy gained by a particle of charge $e$ moving through a potential difference of $1\ \text{V}$: $1\ \text{eV}=1.6\times10^{-19}\ \text{J}$. A charge $q$ falling freely through a potential difference $\Delta V$ gains kinetic energy $|q\,\Delta V|$.

Potential of a point charge. Take a charge $q$ at the origin. The field at distance $r$ is $\mathbf E=\dfrac{kq}{r^2}\hat{\mathbf r}$. Bring the test charge in along a radius from infinity to distance $r$; with $d\mathbf l$ along the radius, $\mathbf E\cdot d\mathbf l=E\,dr'$:

$$V(r)=-\int_\infty^r\frac{kq}{r'^2}\,dr'=\left[\frac{kq}{r'}\right]_\infty^r=\frac{kq}{r}.$$
📐 Result 11.13 — Potential of a point charge

The potential at distance $r$ from a point charge $q$ in vacuum (or air), with $V=0$ at infinity, is

$$V=\frac{kq}{r}=\frac{1}{4\pi\varepsilon_0}\frac{q}{r}.$$

The sign of $q$ goes in: $V\gt0$ near a positive charge and $V\lt0$ near a negative one. $V$ falls off as $1/r$, more slowly than the field ($1/r^2$). The same formula gives the potential outside any spherically symmetric distribution of total charge $q$, with $r$ measured from its centre.

Because $U=qV$, energy conservation for a charge moving freely in an electrostatic field reads $K_A+qV_A=K_B+qV_B$. A positive charge speeds up as it moves to lower potential; a negative charge (an electron) speeds up as it moves to higher potential.

✏️ Example 1 — Potentials near a small charged sphere
A small sphere carries a charge of $4.0\ \text{nC}$. Points $A$ and $B$ are $0.30\ \text{m}$ and $0.60\ \text{m}$ from its centre. (a) Find $V_A$ and $V_B$. (b) Find the work done by an external agent in carrying a $2.0\ \mu\text{C}$ charge slowly from $B$ to $A$. (c) An electron starts from rest at $B$. Find its kinetic energy (in eV and in J) and its speed when it reaches $A$.
(a) $kq=9.0\times10^9\times4.0\times10^{-9}=36\ \text{V m}$. $V_A=\dfrac{36}{0.30}=120\ \text{V}$; $V_B=\dfrac{36}{0.60}=60\ \text{V}$.
(b) $W=q_0(V_A-V_B)=2.0\times10^{-6}\times60=1.2\times10^{-4}\ \text{J}$. It is positive: you must push a positive charge towards a positive charge.
(c) The electron moves to the higher potential, so it gains $K=e\times60\ \text{V}=60\ \text{eV}=60\times1.6\times10^{-19}=9.6\times10^{-18}\ \text{J}$. Speed $v=\sqrt{\dfrac{2K}{m_e}}=\sqrt{\dfrac{2\times9.6\times10^{-18}}{9.1\times10^{-31}}}=4.6\times10^{6}\ \text{m/s}$.
Check The electron is attracted by the positive sphere, so it should indeed speed up on the way from $B$ to $A$ ✓. The answer did not need the path — only $V_A-V_B$.

The potential at a point $P$ is $+50\ \text{V}$. The work done by an external agent in bringing a charge of $-2.0\ \mu\text{C}$ slowly from infinity to $P$ is

Potential of a system of charges and of a dipole

Work is additive: the work done against the combined field of several fixed charges is the sum of the works done against each field separately. So potentials simply add — as numbers, with their signs.

📐 Result 11.14 — Superposition of potentials

The potential at a point due to point charges $q_1,q_2,\dots,q_n$ at distances $r_1,r_2,\dots,r_n$ from it is the algebraic sum

$$V=k\sum_{i=1}^{n}\frac{q_i}{r_i}.$$

For a continuous distribution, divide it into elements of charge $dq$ at distance $r$ and integrate: $V=k\displaystyle\int\frac{dq}{r}$. For example, every element of a thin ring of radius $R$ and total charge $Q$ is at the same distance $\sqrt{R^2+x^2}$ from a point on the axis at distance $x$ from the centre, so $V=\dfrac{kQ}{\sqrt{R^2+x^2}}$ (and $kQ/R$ at the centre).

Compare this with fields: to add fields you need directions and components; to add potentials you need only distances. A point where $\mathbf E=0$ need not have $V=0$ (the midpoint of two equal positive charges), and a point where $V=0$ need not have $\mathbf E=0$ (the midpoint of a dipole).

Potential of a charged thin spherical shell. In § 11.2 Gauss's law showed that a uniformly charged thin shell of radius $R$ and charge $Q$ has field $kQ/r^2$ outside, as if all the charge were at the centre, and zero field inside. Outside, then, $V=kQ/r$. At the surface $V=kQ/R$. Moving inside costs no work (there is no field), so the potential stays at $kQ/R$ everywhere inside.

📐 Result 11.15 — Potential of a uniformly charged thin spherical shell

For a thin shell of radius $R$ carrying charge $Q$ spread uniformly over it:

$$V=\frac{kQ}{r}\ \ (r\ge R),\qquad V=\frac{kQ}{R}\ \ (r\le R).$$

The potential is continuous at the surface and constant (not zero) inside, while the field jumps from $kQ/R^2$ just outside to zero inside.

Potential of an electric dipole. A dipole consists of charges $+q$ and $-q$ a distance $2a$ apart, with dipole moment $\mathbf p$ of magnitude $p=q\times2a$, pointing from $-q$ to $+q$. Take a point $P$ at distance $r$ from the centre, the line to $P$ making angle $\theta$ with $\mathbf p$. Its distances from the two charges are $r_+$ and $r_-$, and

$$V=kq\left(\frac{1}{r_+}-\frac{1}{r_-}\right)=kq\,\frac{r_--r_+}{r_+r_-}.$$

When $r\gg a$, the two lines to $P$ are almost parallel, so $r_--r_+\approx2a\cos\theta$ and $r_+r_-\approx r^2$. Hence $V\approx\dfrac{kq\,(2a)\cos\theta}{r^2}$.

📐 Result 11.16 — Potential of an electric dipole

At distance $r$ from the centre of a dipole of moment $p$, along a line at angle $\theta$ to $\mathbf p$, for $r\gg a$ (a short dipole):

$$V=\frac{kp\cos\theta}{r^2}=\frac{k\,\mathbf p\cdot\hat{\mathbf r}}{r^2}.$$

On the axis, on the side of $+q$ ($\theta=0$): $V=+kp/r^2$; on the side of $-q$ ($\theta=180^\circ$): $V=-kp/r^2$. On the equatorial (perpendicular-bisector) plane ($\theta=90^\circ$): $V=0$ exactly, at every distance. The dipole potential falls as $1/r^2$, faster than that of a single charge.

✏️ Example 2 — Four charges on a square
Charges $+2.0\ \mu\text{C}$, $-3.0\ \mu\text{C}$, $+4.0\ \mu\text{C}$ and $+1.0\ \mu\text{C}$ sit at the corners $A$, $B$, $C$, $D$ (in order) of a square of side $0.20\ \text{m}$. Find (a) the potential at the centre $O$; (b) the potential at the midpoint $M$ of side $AB$; (c) the work needed to carry a $0.50\ \mu\text{C}$ charge slowly from $M$ to $O$.
(a) Every corner is $0.20/\sqrt2=0.141\ \text{m}$ from $O$, so only the total charge matters: $V_O=\dfrac{k(2-3+4+1)\times10^{-6}}{0.1414}=\dfrac{9.0\times10^9\times4.0\times10^{-6}}{0.1414}=2.55\times10^5\ \text{V}$.
(b) $M$ is $0.10\ \text{m}$ from $A$ and $B$, and $\sqrt{0.10^2+0.20^2}=0.224\ \text{m}$ from $C$ and $D$: $V_M=9.0\times10^3\left(\dfrac{2-3}{0.10}+\dfrac{4+1}{0.2236}\right)=9.0\times10^3(-10+22.36)=1.11\times10^5\ \text{V}$.
(c) $W=q_0(V_O-V_M)=0.50\times10^{-6}\times(2.55-1.11)\times10^5=7.2\times10^{-2}\ \text{J}$.
⏱ Shortcut When all the charges are equidistant from the point, $V=k\left(\sum q\right)/r$. No such shortcut exists for the field at $O$ — that needs the vector sum of four fields.
✏️ Example 3 — Potential round a short dipole
Charges $\pm2.0\ \text{nC}$ are held $4.0\ \text{mm}$ apart. (a) Find the dipole moment. Find the potential at a distance of $0.20\ \text{m}$ from the centre (b) on the axis on the side of the positive charge, (c) along a line at $60^\circ$ to the axis, and (d) on the equatorial line. (e) Check (b) against the exact two-charge calculation.
Find the potential in (c) before you open the solution:
(a) $p=q\times2a=2.0\times10^{-9}\times4.0\times10^{-3}=8.0\times10^{-12}\ \text{C m}$, pointing from $-q$ to $+q$.
(b) $V=\dfrac{kp}{r^2}=\dfrac{9.0\times10^9\times8.0\times10^{-12}}{0.040}=1.8\ \text{V}$.
(c), (d) $V=1.8\cos60^\circ=0.90\ \text{V}$; on the equatorial line $\cos90^\circ=0$, so $V=0$.
(e) Exactly: $V=kq\left(\dfrac{1}{0.198}-\dfrac{1}{0.202}\right)=18\times(5.0505-4.9505)=1.8002\ \text{V}$ — the short-dipole formula is good to $0.01\,\%$ because $r=100a$.
Note A single $2.0\ \text{nC}$ charge would give $kq/r=90\ \text{V}$ at $0.20\ \text{m}$: the two opposite charges almost cancel, leaving a potential that is $2a\cos\theta/r$ times smaller.

In Interactive 1 set $q_1=+4\ \text{nC}$ (at $x=-0.10\ \text{m}$) and $q_2=-1\ \text{nC}$ (at $x=+0.10\ \text{m}$). Where on the $x$-axis is the potential zero?

Set $q_1=+4$, $q_2=-1$ and read "V = 0 on the axis at": $x=0.060\ \text{m}$ and $x=0.167\ \text{m}$. Between the charges, $4/(x+0.1)=1/(0.1-x)$ gives $x=0.06\ \text{m}$; beyond $q_2$, $4/(x+0.1)=1/(x-0.1)$ gives $x=1/6\ \text{m}$. To the left of $q_1$ the big positive charge is always nearer, so $V\gt0$ there. Now drag the probe to $x=0.06\ \text{m}$: $V$ reads $0$ but $E_x$ reads about $7030\ \text{V/m}$ — zero potential does not mean zero field.
Interactive 1 — Potential Along the Line of Two Charges

Two point charges sit on the $x$-axis at $x=\mp0.10\ \text{m}$. The graph shows $V(x)=kq_1/|x+0.1|+kq_2/|x-0.1|$ along the axis (clipped near the charges). Set the charges, then move the probe — or press Play to sweep it. The dashed tangent shows the slope $dV/dx$; the field is $E_x=-dV/dx$.

+3 nC−3 nC0.30 m
probe at—
potential $V$—
field $E_x=-dV/dx$—
V = 0 on the axis at—

At a point on the equatorial line of a short electric dipole (far from it),

Equipotential surfaces, E = −dV/dr, and conductors

Join up all the points that have the same potential and you get a surface — like a contour line on a map, which joins points of the same height.

📘 Definition 11.10 — Equipotential surface

An equipotential surface is a surface on which the electric potential has the same value at every point. Equipotentials are usually drawn for equal steps of potential (say every $10\ \text{V}$).

📐 Result 11.17 — Properties of equipotential surfaces
  1. No work is done by the field (or by an agent) in moving a charge between two points of the same equipotential.
  2. The electric field at every point is perpendicular to the equipotential through that point, and points towards decreasing potential.
  3. Where equipotentials (drawn for equal steps $\Delta V$) are closer together, the field is stronger: $E\approx\Delta V/\Delta n$, with $\Delta n$ the perpendicular spacing.
  4. Two different equipotentials never meet or cross (a point cannot have two potentials, and the field there would need two directions).

Property 2 follows from property 1: if $\mathbf E$ had a component along the surface, moving a charge along it would need work. Some shapes to know: for a point charge, concentric spheres ($r=kq/V$) — for equal steps of $V$ they get farther apart going outwards, because the field weakens; for a uniform field, equally spaced parallel planes perpendicular to the field; for a dipole, a set of closed surfaces round each charge, with the equatorial plane as the $V=0$ surface; for any charged conductor, its own surface (see below).

Getting the field from the potential. Move a short distance $dl$ in some direction. The potential changes by $dV=-\mathbf E\cdot d\mathbf l=-E_l\,dl$, where $E_l$ is the field component in that direction. So $E_l=-dV/dl$: the component of the field in any direction is minus the rate of change of $V$ in that direction. It is largest along the normal to the equipotentials, which is the field's own direction.

📐 Result 11.18 — Field from potential: E = −dV/dr

The field points in the direction in which $V$ decreases fastest, and its magnitude is the rate of that decrease:

$$E=-\frac{dV}{dr}\quad\text{(along the field line)},\qquad E_x=-\frac{\partial V}{\partial x},\ \ E_y=-\frac{\partial V}{\partial y},\ \ E_z=-\frac{\partial V}{\partial z}.$$

Here $\partial V/\partial x$ means: differentiate $V(x,y,z)$ with respect to $x$, treating $y$ and $z$ as constants. In reverse, $V_B-V_A=-\displaystyle\int_A^B\mathbf E\cdot d\mathbf l$; for a uniform field $\mathbf E=E_x\hat{\mathbf i}+E_y\hat{\mathbf j}$, $\ V_B-V_A=-(E_x\Delta x+E_y\Delta y)$.

On graphs: $E_x$ is minus the slope of the $V$–$x$ graph, and $V_A-V_B$ is the area under the $E_x$–$x$ graph from $A$ to $B$. Where $V$ is a maximum or minimum, $E_x=0$; where $V$ is constant over a region, $\mathbf E=0$ there.

✏️ Example 4 — Field from a potential, potential from a field
(a) In a region the potential is $V=5x^2-3xy+2z$ (volts, with $x$, $y$, $z$ in metres). Find the electric field and its magnitude at the point $(1\ \text{m},\,2\ \text{m},\,0)$. (b) In another region the field is uniform, $\mathbf E=(20\,\hat{\mathbf i}+30\,\hat{\mathbf j})\ \text{V/m}$. Find $V_B-V_A$ for $A=(0,0)$ and $B=(2\ \text{m},\,3\ \text{m})$, and the work done by the field on a $-2.0\ \mu\text{C}$ charge that moves from $A$ to $B$.
(a) $\dfrac{\partial V}{\partial x}=10x-3y=10-6=4$, $\ \dfrac{\partial V}{\partial y}=-3x=-3$, $\ \dfrac{\partial V}{\partial z}=2$. So $\mathbf E=(-4\,\hat{\mathbf i}+3\,\hat{\mathbf j}-2\,\hat{\mathbf k})\ \text{V/m}$, $\ E=\sqrt{16+9+4}=\sqrt{29}=5.4\ \text{V/m}$.
(b) $V_B-V_A=-(E_x\Delta x+E_y\Delta y)=-(20\times2+30\times3)=-130\ \text{V}$: $B$ is "downhill" from $A$.
Work Work by the field $=q(V_A-V_B)=(-2.0\times10^{-6})(130)=-2.6\times10^{-4}\ \text{J}$: a negative charge resists being moved to lower potential.
Check In (b) the field is the same everywhere, so any path gives the same answer — e.g. go $2\ \text{m}$ along $x$ ($-40\ \text{V}$) then $3\ \text{m}$ along $y$ ($-90\ \text{V}$) ✓.

Conductors in electrostatics. A metal contains free electrons that move whenever there is a field inside it. When charges are placed on or near a conductor, the free electrons shift for a very short time and then stop. "Electrostatics" means this final state, with nothing moving — and that single fact fixes everything below.

📐 Result 11.19 — Electrostatics of conductors

For a conductor in electrostatic equilibrium:

  1. $\mathbf E=0$ everywhere inside the material (otherwise free electrons would still be moving).
  2. Any net charge resides on the surface (Gauss's law on a surface just inside the metal encloses zero charge).
  3. Just outside, $\mathbf E$ is perpendicular to the surface, with magnitude $E=\sigma/\varepsilon_0$, where $\sigma$ is the local surface charge density.
  4. The whole conductor — inside and surface — is at one potential; its surface is an equipotential.
  5. In an empty cavity inside a conductor (with no charge in the cavity) the field is zero, whatever the charges and fields outside: electrostatic shielding.
  6. On an irregular conductor, $\sigma$ (and so the field outside) is largest where the surface is most sharply curved.

Item 6 is easiest to see with two spheres of radii $R_1$ and $R_2$, far apart and joined by a thin wire, so that they form one conductor. Charge flows until their potentials are equal: $kq_1/R_1=kq_2/R_2$, so $q\propto R$. Then $\sigma=q/4\pi R^2\propto1/R$: the smaller sphere has the larger surface charge density and the stronger field. A sharp point is like a very small sphere — its field can become strong enough to ionise the air (about $3\times10^6\ \text{V/m}$ breaks down dry air), which is how lightning conductors leak charge away. Shielding explains why a car or an aircraft is a safe place in a thunderstorm and why sensitive circuits are enclosed in metal boxes. If a charge $q$ is placed inside a cavity of an uncharged conductor, a charge $-q$ is induced on the cavity wall and $+q$ appears on the outer surface.

✏️ Example 5 — Two spheres joined by a wire
Two metal spheres of radii $3.0\ \text{cm}$ and $1.0\ \text{cm}$, far apart, are joined by a thin wire and given a total charge of $40\ \text{nC}$. Find (a) the charge on each sphere, (b) their common potential, (c) the surface charge densities and (d) the electric field just outside each surface. Ignore the charge on the wire.
Find the charge on the larger sphere first:
(a) One conductor, one potential: $q_1/R_1=q_2/R_2$, so $q_1:q_2=3:1$. With $q_1+q_2=40\ \text{nC}$: $q_1=30\ \text{nC}$, $q_2=10\ \text{nC}$.
(b) $V=\dfrac{kq_1}{R_1}=\dfrac{9.0\times10^9\times30\times10^{-9}}{0.030}=9.0\times10^3\ \text{V}$ (and $\dfrac{kq_2}{R_2}=\dfrac{90}{0.010}=9.0\times10^3\ \text{V}$ ✓).
(c) $\sigma_1=\dfrac{30\times10^{-9}}{4\pi(0.030)^2}=2.7\times10^{-6}\ \text{C/m}^2$, $\ \sigma_2=\dfrac{10\times10^{-9}}{4\pi(0.010)^2}=8.0\times10^{-6}\ \text{C/m}^2$ — three times larger on the small sphere.
(d) $E=\sigma/\varepsilon_0=V/R$: $E_1=\dfrac{9000}{0.030}=3.0\times10^5\ \text{V/m}$, $\ E_2=\dfrac{9000}{0.010}=9.0\times10^5\ \text{V/m}$.
⏱ Shortcut For connected spheres: $q\propto R$, $\sigma\propto1/R$, $E_\text{surface}\propto1/R$. The ratios need no constants at all.

Along the $x$-axis the potential rises uniformly from $10\ \text{V}$ at $x=0$ to $40\ \text{V}$ at $x=0.10\ \text{m}$. The electric field in this region is

Electric potential energy of charges and of a dipole

So far one charge moved while the others stayed put. Now look at the energy of a whole arrangement of charges — the energy you must supply to build it, and which it can give back if it is allowed to fly apart.

📘 Definition 11.11 — Electric potential energy of a system of charges

The electric potential energy $U$ of a system of point charges is the work done by an external agent in assembling it — bringing the charges slowly, one at a time, from infinite separation to their positions. It equals the work the electric forces would do if the charges were allowed to separate to infinity.

Bring $q_1$ first: no work, as nothing else is there yet. Then bring $q_2$ to distance $r_{12}$ from it: the work is $q_2\times(kq_1/r_{12})$. A third charge has to be brought against the potentials of both, adding $kq_1q_3/r_{13}+kq_2q_3/r_{23}$, and so on. The total does not depend on the order: every pair appears once.

📐 Result 11.20 — Potential energy of two or more point charges

For two point charges a distance $r$ apart, and for a system of charges (one term for each pair):

$$U=\frac{kq_1q_2}{r},\qquad U=k\sum_{\text{all pairs } i\lt j}\frac{q_iq_j}{r_{ij}}.$$

The signs of the charges go in. $U\gt0$ for like charges (work was needed to push them together; they fly apart when released); $U\lt0$ for unlike charges (they attract, and work is needed to separate them). For a charge $q$ placed in the potential $V$ of other, fixed charges, $U=qV$.

Energy conservation, $K+U=\text{constant}$, then answers questions about charges that move. A classic is the distance of closest approach: a positive particle of charge $q$ and kinetic energy $K$ fired straight at a fixed nucleus of charge $Ze$ stops momentarily where $K=kqZe/r_0$, so $r_0=kqZe/K$.

A dipole in a uniform field. In § 11.1 we saw that a dipole of moment $\mathbf p$ in a uniform field $\mathbf E$ feels no net force (the forces $\pm q\mathbf E$ cancel) but a torque $\boldsymbol\tau=\mathbf p\times\mathbf E$, of size $pE\sin\theta$, turning it towards the field. To rotate it slowly from $\theta_1$ to $\theta_2$ an agent must supply an equal and opposite torque, doing work

$$W=\int_{\theta_1}^{\theta_2}pE\sin\theta\,d\theta=pE(\cos\theta_1-\cos\theta_2).$$

This work is stored as potential energy. Choosing $U=0$ at $\theta=90^\circ$ (the convenient zero, when the dipole is perpendicular to the field) gives $U(\theta)=-pE\cos\theta$.

📐 Result 11.21 — Potential energy of a dipole in a uniform field

A dipole of moment $\mathbf p$ making angle $\theta$ with a uniform field $\mathbf E$ has potential energy

$$U=-pE\cos\theta=-\mathbf p\cdot\mathbf E\qquad(U=0\text{ at }\theta=90^\circ).$$

Work done by an external agent in turning it slowly from $\theta_1$ to $\theta_2$: $\ W=U_2-U_1=pE(\cos\theta_1-\cos\theta_2)$. Stable equilibrium at $\theta=0$ ($\mathbf p$ along $\mathbf E$, $U=-pE$, the minimum); unstable equilibrium at $\theta=180^\circ$ ($U=+pE$, the maximum). The torque is zero at both. Turning the dipole from $\theta=0$ to $180^\circ$ needs $W=2pE$. (In a non-uniform field there is also a net force.)

✏️ Example 6 — Energy of a charge triangle and of a dipole
(a) Charges $+2.0\ \mu\text{C}$, $-2.0\ \mu\text{C}$ and $+3.0\ \mu\text{C}$ are at the corners of an equilateral triangle of side $0.30\ \text{m}$. Find the electric potential energy of the system and the work needed to separate the charges completely. (b) A dipole of moment $3.0\times10^{-8}\ \text{C m}$ is lined up with a uniform field of $2.0\times10^4\ \text{N/C}$. Find the work needed to turn it through $60^\circ$ and through $180^\circ$, and the torque on it and its potential energy at $60^\circ$.
Find the potential energy of the triangle in (a):
(a) $U=\dfrac{k}{a}(q_1q_2+q_2q_3+q_1q_3)=\dfrac{9.0\times10^9}{0.30}\big[(2)(-2)+(-2)(3)+(2)(3)\big]\times10^{-12}=3.0\times10^{10}\times(-4\times10^{-12})=-0.12\ \text{J}$.
Separate To pull them apart to infinity (final $U=0$), the agent must supply $0-(-0.12)=+0.12\ \text{J}$.
(b) $pE=3.0\times10^{-8}\times2.0\times10^4=6.0\times10^{-4}\ \text{J}$. $W_{0\to60^\circ}=pE(1-\cos60^\circ)=3.0\times10^{-4}\ \text{J}$; $\ W_{0\to180^\circ}=2pE=1.2\times10^{-3}\ \text{J}$.
At 60° $\tau=pE\sin60^\circ=5.2\times10^{-4}\ \text{N m}$; $\ U=-pE\cos60^\circ=-3.0\times10^{-4}\ \text{J}$.
⏱ Shortcut For $n$ charges count $n(n-1)/2$ pairs: here $3$. And for the dipole, "work from the aligned position" is always $pE(1-\cos\theta)$.

In Interactive 2 set $p=4\times10^{-9}\ \text{C m}$, $E=5\times10^4\ \text{N/C}$ and $\theta_0=60^\circ$. How much work is needed to turn the dipole from $\theta=0$ to $60^\circ$?

With these settings $pE=2.0\times10^{-4}\ \text{J}=200\ \mu\text{J}$, and the readouts show torque $173\ \mu\text{N m}$ $(=pE\sin60^\circ)$, $U=-100\ \mu\text{J}$ and work from $\theta=0$ of $100\ \mu\text{J}$ $(=pE(1-\cos60^\circ))$. $173$ is the torque, not the work; $200\ \mu\text{J}$ would be the work to turn it to $90^\circ$. Press Play: released at $60^\circ$, the dipole swings through $\theta=0$ (where all $100\ \mu\text{J}$ has become kinetic energy) to $-60^\circ$ and back — the dot rolls in the bowl of $U=-pE\cos\theta$.
Interactive 2 — Dipole in a Uniform Field: Torque and Energy

A dipole sits in a uniform field pointing right. Set its moment $p$, the field $E$ and the starting angle $\theta_0$ (measured from $\mathbf E$). The readouts give the torque, the potential energy and the work needed to turn it there from $\theta=0$. Press Play to release it: it swings in the energy "bowl" $U=-pE\cos\theta$ shown on the right (no friction; the swing speeds up with $pE$, time not to scale).

4560°
torque at $\theta_0$—
$U=-pE\cos\theta_0$—
work from $\theta=0$—
angle now—
✏️ Example 7 — NEET-style: one-line potential questions
(a) At a point near an isolated point charge, the electric potential is $600\ \text{V}$ and the electric field is $200\ \text{N/C}$. The charge is ($k=9\times10^9\ \text{N m}^2\text{C}^{-2}$) (A) $0.2\ \mu\text{C}$ (B) $2.0\ \mu\text{C}$ (C) $20\ \text{nC}$ (D) $0.067\ \mu\text{C}$.
(b) In a region the potential varies along the $x$-axis as $V=4x^2$ (volts, $x$ in metres). The electric field at $x=1\ \text{m}$ is (A) $8\ \text{V/m}$ along $+x$ (B) $8\ \text{V/m}$ along $-x$ (C) $4\ \text{V/m}$ along $-x$ (D) zero.
(a) Distance For a point charge $V=\dfrac{kq}{r}$ and $E=\dfrac{kq}{r^2}$ (Results 11.5 and 11.13), so $\dfrac VE=r=\dfrac{600}{200}=3\ \text{m}$.
(a) Charge $q=\dfrac{Vr}{k}=\dfrac{600\times3}{9\times10^9}=2\times10^{-7}\ \text{C}$.
Answer (a) (A) $0.2\ \mu\text{C}$. (B) and (C) are power-of-ten slips ($2\times10^{-7}\ \text{C}$ is $200\ \text{nC}$); (D) uses $r=1\ \text{m}$.
(b) Slope $E_x=-\dfrac{dV}{dx}=-8x$ (Result 11.18), so at $x=1\ \text{m}$, $E_x=-8\ \text{V/m}$.
Answer (b) (B) $8\ \text{V/m}$ along $-x$. (A) drops the minus sign; (C) divides $V$ by $x$ instead of differentiating; (D) would need a flat $V$–$x$ graph at $x=1\ \text{m}$.
⏱ Shortcut For a point charge, $V/E$ is the distance. And the field always points "downhill" in potential: here $V$ rises with $x$, so $\mathbf E$ points along $-x$ — that alone removes (A) and (D).
⚠️ NEET traps

1. Dropping the signs. In $V=kq/r$ and $U=kq_1q_2/r$ the charges carry their signs. Work by an agent carrying $q$ from $A$ to $B$ is $q(V_B-V_A)$; work by the field is $q(V_A-V_B)$. Options with the opposite sign are always offered.

2. Scalar against vector. Potentials add as numbers, fields as vectors. $V=0$ does not mean $\mathbf E=0$ (the equatorial line of a dipole), and $\mathbf E=0$ does not mean $V=0$ (midway between two equal positive charges). Charges all equidistant from a point give $V=k\left(\sum q\right)/r$ at once.

3. Inside a shell or a conductor. The field is zero; the potential is $kQ/R$, the same as on the surface — not zero. The whole conductor is one equipotential, and its charge sits on the surface.

4. $E=-dV/dr$ on graphs. The field is minus the slope of the $V$–$x$ graph: a rising line means a field along $-x$, a flat stretch means zero field (whatever the value of $V$). Equipotentials are perpendicular to field lines and closer together where the field is stronger; no work is done along an equipotential.

5. Dipole energy. $U=-pE\cos\theta$ is zero at $90^\circ$, not at $0^\circ$. Turning the dipole from the stable position through $\theta$ needs $pE(1-\cos\theta)$, and right round through $180^\circ$ needs $2pE$ — not $pE$. Torque and energy are different: $pE\sin\theta$ against $-pE\cos\theta$.

6. Electron volts and charge. A charge $q$ falling through $\Delta V$ gains $|q|\Delta V$: $1\ \text{eV}=1.6\times10^{-19}\ \text{J}$. An alpha particle (charge $2e$) through $1\ \text{kV}$ gains $2\ \text{keV}$, not $1\ \text{keV}$. The eV is a unit of energy, not of potential.

7. Joined spheres. Two spheres connected by a wire reach one potential: $q\propto R$, but $\sigma\propto1/R$ and the surface field $\propto1/R$ — the small sphere has the larger charge density.

Two electrons are pushed closer together. The electric potential energy of the pair

Exercises

Take $k=9.0\times10^9\ \text{N m}^2\text{C}^{-2}$, $e=1.6\times10^{-19}\ \text{C}$, $m_e=9.1\times10^{-31}\ \text{kg}$, $m_p=1.67\times10^{-27}\ \text{kg}$ and $V=0$ at infinity unless told otherwise.

I
Potential and potential difference.
  • 1 Find the potential at a distance of $0.50\ \text{m}$ from a charge of $5.0\ \text{nC}$.
  • 2 At what distance from a charge of $-3.0\ \text{nC}$ is the potential $-27\ \text{V}$?
  • 3 Find the work done by an external agent in carrying a $3.0\ \mu\text{C}$ charge slowly from a point at $20\ \text{V}$ to a point at $80\ \text{V}$.
  • 4 A proton starting from rest is accelerated through $2.0\ \text{kV}$. Find its kinetic energy in eV and in J, and its final speed.
  • 5 A uniform field of $500\ \text{V/m}$ points along $+x$. Find $V_A-V_B$ for $A$ at $x=0.10\ \text{m}$ and $B$ at $x=0.40\ \text{m}$.
  • 6 Charges $+6.0\ \text{nC}$ and $-2.0\ \text{nC}$ are at $x=0$ and $x=0.40\ \text{m}$. Find every point on the $x$-axis where $V=0$.
  • 7 Charges $+1.0$, $+2.0$ and $-3.0\ \mu\text{C}$ sit at the corners of an equilateral triangle of side $0.30\ \text{m}$. Find the potential at its centre. Is the field there zero too?
  • 8 A thin ring of radius $0.30\ \text{m}$ carries $10\ \text{nC}$ spread round it. Find the potential at its centre and at a point on its axis $0.40\ \text{m}$ from the centre.
1 $V=\dfrac{9.0\times10^9\times5.0\times10^{-9}}{0.50}=90\ \text{V}$.
2 $r=\dfrac{kq}{V}=\dfrac{-27}{-27}=1.0\ \text{m}$.
3 $W=q(V_B-V_A)=3.0\times10^{-6}\times60=1.8\times10^{-4}\ \text{J}$.
4 $K=2.0\ \text{keV}=2000\times1.6\times10^{-19}=3.2\times10^{-16}\ \text{J}$; $v=\sqrt{\dfrac{2\times3.2\times10^{-16}}{1.67\times10^{-27}}}=6.19\times10^5\ \text{m/s}$.
5 $V_B-V_A=-E\Delta x=-500\times0.30=-150\ \text{V}$, so $V_A-V_B=+150\ \text{V}$.
6 Between: $\dfrac{6}{x}=\dfrac{2}{0.40-x}\Rightarrow x=0.30\ \text{m}$. Beyond the negative charge: $\dfrac{6}{x}=\dfrac{2}{x-0.40}\Rightarrow x=0.60\ \text{m}$. To the left of $x=0$ the larger charge is always nearer, so $V\gt0$: no zero there.
7 All three are $0.30/\sqrt3=0.173\ \text{m}$ from the centre and $\sum q=0$, so $V=0$. The field is not zero: the three fields have different sizes and do not cancel.
8 Centre: $V=\dfrac{kQ}{R}=\dfrac{90}{0.30}=300\ \text{V}$. Axis: $V=\dfrac{kQ}{\sqrt{R^2+x^2}}=\dfrac{90}{0.50}=180\ \text{V}$.
II
Dipoles, equipotentials and E = −dV/dr.
  • 1 A short dipole has moment $6.0\times10^{-11}\ \text{C m}$. Find the potential $0.30\ \text{m}$ from its centre on its axis (on the side of $+q$).
  • 2 For the same dipole, find the potential $0.30\ \text{m}$ from the centre along a line at $120^\circ$ to $\mathbf p$.
  • 3 How much work is needed to carry a charge along the perpendicular bisector of a dipole from one point to another? Explain.
  • 4 For a point charge of $2.0\ \text{nC}$, find the radii of the $60\ \text{V}$ and $30\ \text{V}$ equipotentials and the gap between them. Are equipotentials of a point charge for equal steps of $V$ equally spaced?
  • 5 Along the $x$-axis $V=4x^3-6x$ (volts, $x$ in metres). Find $E_x$ at $x=2.0\ \text{m}$ and the points where $E_x=0$.
  • 6 $V=2xy+3yz$ (volts, coordinates in metres). Find the magnitude of the field at $(1,1,1)$.
  • 7 Two parallel equipotential planes, at $20\ \text{V}$ and $80\ \text{V}$, are $5.0\ \text{cm}$ apart in a uniform field. Find the size and direction of the field.
  • 8 Explain why two equipotential surfaces cannot cross, and why field lines meet equipotentials at right angles.
1 $V=\dfrac{kp}{r^2}=\dfrac{9.0\times10^9\times6.0\times10^{-11}}{0.090}=6.0\ \text{V}$.
2 $V=6.0\cos120^\circ=-3.0\ \text{V}$.
3 None: every point of the bisector (the equatorial plane) is at $V=0$, so $W=q\Delta V=0$, whatever the path along it.
4 $kq=18\ \text{V m}$: $r_{60}=0.30\ \text{m}$, $r_{30}=0.60\ \text{m}$, gap $0.30\ \text{m}$. No — e.g. the $90\ \text{V}$ surface is at $0.20\ \text{m}$, only $0.10\ \text{m}$ inside the $60\ \text{V}$ one; the gaps widen outwards as the field weakens.
5 $E_x=-\dfrac{dV}{dx}=-(12x^2-6)$; at $x=2$: $-(48-6)=-42\ \text{V/m}$ (along $-x$). $E_x=0$ where $x^2=0.5$: $x=\pm0.71\ \text{m}$.
6 $\partial V/\partial x=2y=2$, $\partial V/\partial y=2x+3z=5$, $\partial V/\partial z=3y=3$; $E=\sqrt{4+25+9}=\sqrt{38}=6.16\ \text{V/m}$.
7 $E=\dfrac{\Delta V}{d}=\dfrac{60}{0.050}=1200\ \text{V/m}$, perpendicular to the planes, pointing from the $80\ \text{V}$ plane to the $20\ \text{V}$ plane.
8 At a crossing point the potential would have two values, which is impossible. Moving along an equipotential needs no work, so $\mathbf E$ can have no component along it: $\mathbf E$ is normal to it.
III
Conductors and charged shells.
  • 1 A thin spherical shell of radius $0.10\ \text{m}$ carries $5.0\ \text{nC}$. Find the potential at $0.050\ \text{m}$ and at $0.30\ \text{m}$ from its centre, and the field at $0.050\ \text{m}$.
  • 2 A metal sphere of radius $0.20\ \text{m}$ is at a potential of $3600\ \text{V}$. Find its charge and its surface charge density.
  • 3 Air breaks down in a field of $3.0\times10^6\ \text{V/m}$. Find the highest potential to which a metal sphere of radius $5.0\ \text{cm}$ can be charged in air.
  • 4 Spheres of radii $6.0\ \text{cm}$ and $2.0\ \text{cm}$, far apart, are joined by a thin wire and share $16\ \text{nC}$. Find the common potential.
  • 5 In part 4, find the ratio of the electric field just outside the small sphere to that just outside the large one.
  • 6 Explain why the charge on a conductor lives on its outer surface, and why you are safe inside a car struck by lightning.
  • 7 A point charge of $2.0\ \text{nC}$ is placed at the centre of an uncharged hollow metal sphere of inner radius $0.10\ \text{m}$ and outer radius $0.15\ \text{m}$. State the charges induced on its two surfaces and find the potential of the metal.
1 Inside: $V=\dfrac{kQ}{R}=\dfrac{45}{0.10}=450\ \text{V}$, and $E=0$. At $0.30\ \text{m}$: $\dfrac{45}{0.30}=150\ \text{V}$.
2 $Q=\dfrac{VR}{k}=\dfrac{3600\times0.20}{9.0\times10^9}=8.0\times10^{-8}\ \text{C}=80\ \text{nC}$; $\sigma=\dfrac{Q}{4\pi R^2}=1.6\times10^{-7}\ \text{C/m}^2$.
3 At the surface $E=V/R$, so $V_\text{max}=E_\text{max}R=3.0\times10^6\times0.050=1.5\times10^5\ \text{V}$.
4 $q\propto R$: $12\ \text{nC}$ and $4\ \text{nC}$. $V=\dfrac{9.0\times10^9\times12\times10^{-9}}{0.060}=1800\ \text{V}$.
5 $E=V/R$ at each surface, so $\dfrac{E_\text{small}}{E_\text{large}}=\dfrac{R_\text{large}}{R_\text{small}}=3$.
6 Inside the metal $\mathbf E=0$; Gauss's law over a surface just inside the metal then encloses zero charge, so any excess sits on the surface. The car body is a closed conductor: the field in the space it encloses stays zero (shielding), and the lightning current flows round the outside.
7 $-2.0\ \text{nC}$ on the inner surface, $+2.0\ \text{nC}$ on the outer. In the metal the first two cancel, so $V=\dfrac{k(2.0\times10^{-9})}{0.15}=120\ \text{V}$.
IV
Potential energy and energy conservation.
  • 1 Find the potential energy of charges $+4.0\ \mu\text{C}$ and $-6.0\ \mu\text{C}$ held $0.20\ \text{m}$ apart.
  • 2 How much work must an agent do to pull the charges of part 1 apart to $0.40\ \text{m}$?
  • 3 Four charges of $+1.0\ \mu\text{C}$ each are at the corners of a square of side $0.10\ \text{m}$. Find the potential energy of the system.
  • 4 An alpha particle (charge $2e$) of kinetic energy $4.0\ \text{MeV}$ is aimed straight at a gold nucleus ($Z=79$), which stays at rest. Find the distance of closest approach.
  • 5 Two small spheres, each of mass $2.0\ \text{g}$ and charge $+2.0\ \mu\text{C}$, are released from rest $0.10\ \text{m}$ apart on a smooth horizontal table. Find the speed of each when they are far apart.
  • 6 A dipole of moment $2.0\times10^{-8}\ \text{C m}$ is in a uniform field of $5.0\times10^4\ \text{N/C}$. Find the work needed to turn it from its stable to its unstable equilibrium position.
  • 7 For the dipole of part 6 at $60^\circ$ to the field, find the torque and the potential energy.
  • 8 Show that the net force on a dipole in a uniform field is zero, and explain why its potential energy there depends only on its orientation.
1 $U=\dfrac{9.0\times10^9\times(4.0)(-6.0)\times10^{-12}}{0.20}=-1.08\ \text{J}$.
2 $U_\text{final}=-0.54\ \text{J}$; $W=U_\text{final}-U_\text{initial}=-0.54-(-1.08)=+0.54\ \text{J}$.
3 $U=\dfrac{kq^2}{a}\left(4+\dfrac{2}{\sqrt2}\right)=\dfrac{9.0\times10^9\times10^{-12}}{0.10}\times5.414=0.487\ \text{J}$.
4 $r_0=\dfrac{k(2e)(79e)}{K}=\dfrac{9.0\times10^9\times158\times(1.6\times10^{-19})^2}{4.0\times10^6\times1.6\times10^{-19}}=5.69\times10^{-14}\ \text{m}$ (about $57\ \text{fm}$).
5 $U=\dfrac{kq^2}{r}=\dfrac{9.0\times10^9\times4.0\times10^{-12}}{0.10}=0.36\ \text{J}$; by symmetry each gets $0.18\ \text{J}$: $v=\sqrt{\dfrac{2\times0.18}{0.0020}}=13.4\ \text{m/s}$ (momentum is conserved too: equal and opposite velocities).
6 $W=pE(\cos0^\circ-\cos180^\circ)=2pE=2\times2.0\times10^{-8}\times5.0\times10^4=2.0\times10^{-3}\ \text{J}$.
7 $pE=1.0\times10^{-3}\ \text{J}$: $\tau=pE\sin60^\circ=8.7\times10^{-4}\ \text{N m}$; $U=-pE\cos60^\circ=-5.0\times10^{-4}\ \text{J}$.
8 The forces $+q\mathbf E$ and $-q\mathbf E$ are equal and opposite, so they cancel. Moving the dipole without turning it moves $+q$ and $-q$ through the same displacement: the field does $+q\mathbf E\cdot\mathbf d$ and $-q\mathbf E\cdot\mathbf d$ — zero in total. Only turning changes the energy.
🎯 Exam corner NEET · MCQ

E1. NEET · MCQ A proton and an alpha particle (charge $2e$, mass four times that of the proton) start from rest and are accelerated through the same potential difference. The ratios of their kinetic energies, $K_p:K_\alpha$, and of their speeds, $v_p:v_\alpha$, are (A) $1:2$ and $\sqrt2:1$ (B) $1:2$ and $1:\sqrt2$ (C) $1:1$ and $2:1$ (D) $2:1$ and $1:\sqrt2$

Energy $K=q\,\Delta V$ (Definition 11.9): the same $\Delta V$ gives $K_p:K_\alpha=e:2e=1:2$.
Speed $v=\sqrt{\dfrac{2q\,\Delta V}{m}}\propto\sqrt{\dfrac qm}$: $\dfrac{v_p}{v_\alpha}=\sqrt{\dfrac{e/m}{2e/4m}}=\sqrt2$.
Answer (A) $1:2$ and $\sqrt2:1$.
⏱ Shortcut The alpha particle gets more energy but is four times heavier, so it ends up slower: only (A) has the proton faster with the smaller energy. (C) forgets the alpha particle's double charge.

E2. NEET · MCQ Statement I: The electric potential everywhere inside a charged hollow metal sphere is zero. Statement II: The electric field everywhere inside a charged hollow metal sphere is zero. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement II The charge sits on the outer surface; a Gaussian sphere inside encloses none, so $\mathbf E=0$ inside (Results 11.15 and 11.19). Correct.
Statement I Zero field means the potential does not change inside — it stays at the surface value $kQ/R$, which is not zero for a charged sphere. Incorrect.
Answer (D).
⏱ Shortcut $E=-dV/dr$: zero field means constant potential, never necessarily zero potential.

E3. NEET · MCQ Assertion (A): No work is done by the electric field when a charge is moved between two points on the same equipotential surface. Reason (R): The electric field at every point of an equipotential surface is perpendicular to the surface. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Assertion $W=q(V_A-V_B)=0$ when $V_A=V_B$. True.
Reason True (Result 11.17). And it explains A: along the surface every small step $d\mathbf l$ is perpendicular to the force $q\mathbf E$, so each bit of work $q\mathbf E\cdot d\mathbf l$ is zero.
Answer (A).
⏱ Shortcut Read R as "because …" after A. "No work, because the force is perpendicular to the motion" is a complete explanation.

E4. NEET · MCQ Match each quantity in List-I with its expression in List-II ($k=1/4\pi\varepsilon_0$; $p$ is the moment of a short dipole, $r$ the distance from its centre and $\theta$ the angle between $\mathbf p$ and a uniform field $E$).
List-I: (a) the potential at a point on the axis of the dipole (b) the potential at a point on its equatorial line (c) the potential energy of two point charges $q_1$, $q_2$ a distance $r$ apart (d) the potential energy of the dipole in the uniform field
List-II: (i) zero (ii) $-pE\cos\theta$ (iii) $\dfrac{kp}{r^2}$ (iv) $\dfrac{kq_1q_2}{r}$
Choose the correct answer: (A) a-i, b-iii, c-iv, d-ii (B) a-iii, b-i, c-ii, d-iv (C) a-iii, b-i, c-iv, d-ii (D) a-iv, b-i, c-iii, d-ii

Match (a) $\theta=0$ in $kp\cos\theta/r^2$: iii. (b) $\cos90^\circ=0$: i (Result 11.16). (c) iv (Result 11.20). (d) ii (Result 11.21).
Answer (C) a-iii, b-i, c-iv, d-ii.
⏱ Shortcut Only (iv) contains two charges, so c-iv — that removes (B) and (D). The axial potential cannot be zero, which removes (A).

E5. NEET · MCQ The graph shows how the electric potential $V$ varies with position $x$ along a line. The electric field in the regions $OA$, $AB$ and $BC$ is, in order, (A) $1000\ \text{V/m}$ along $+x$; zero; $2000\ \text{V/m}$ along $-x$ (B) $1000\ \text{V/m}$ along $-x$; zero; $2000\ \text{V/m}$ along $+x$ (C) $10\ \text{V/m}$ along $-x$; $20\ \text{V/m}$; $20\ \text{V/m}$ along $+x$ (D) $1000\ \text{V/m}$ along $-x$; zero; $1000\ \text{V/m}$ along $+x$
1234561020x (cm)V (volt)OABC

Slopes $E_x=-\dfrac{dV}{dx}$ (Result 11.18). $OA$: $V$ rises $20\ \text{V}$ in $2\ \text{cm}$, slope $+1000\ \text{V/m}$, so $E_x=-1000\ \text{V/m}$. $AB$: flat, $E=0$. $BC$: $V$ falls $20\ \text{V}$ in $1\ \text{cm}$, slope $-2000\ \text{V/m}$, so $E_x=+2000\ \text{V/m}$.
Answer (B).
⏱ Shortcut Field points downhill: along $-x$ where $V$ rises, along $+x$ where it falls — that removes (A). A flat stretch has zero field even though $V=20\ \text{V}$ there — that removes (C), which also forgets to convert cm to m. The steeper segment has the stronger field — that removes (D).

E6. NEET · MCQ How many of the following statements are correct?
(i) The equipotential surfaces of an isolated point charge are concentric spheres centred on the charge.
(ii) Two equipotential surfaces with different potentials can intersect.
(iii) In a uniform electric field the equipotential surfaces are planes perpendicular to the field.
(iv) The electric potential energy of a system of two unlike point charges is negative.
(v) The electron volt is a unit of potential difference.
(A) One (B) Two (C) Three (D) Four

Check each (i) ✓ $V=kq/r$ is constant where $r$ is constant. (ii) ✗ — a point where they met would have two potentials (Result 11.17). (iii) ✓ the field is perpendicular to every equipotential. (iv) ✓ $U=kq_1q_2/r\lt0$ when the signs differ (Result 11.20). (v) ✗ — $1\ \text{eV}=1.6\times10^{-19}\ \text{J}$ is a unit of energy (Definition 11.9).
Answer (C) three statements: (i), (iii) and (iv).
⏱ Shortcut "Electron volt" contains the word volt, which is exactly why (v) is set — look at what it measures: charge × potential difference, an energy.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. Can you map the equipotential lines between two electrodes on a sheet of conducting paper, and does the field you work out from them match the pattern expected for two point charges?

Why it matters. Engineers who design high-voltage equipment — power-line insulators, X-ray tubes, the electrodes of electron microscopes, the lenses that steer ion beams in cancer therapy — need to know where the field is strongest, because that is where air or insulation breaks down. Before computers, they built scale models and measured potentials point by point, exactly as you will. Today's simulation software solves the same problem numerically, and its results are still checked against measured equipotential maps. Result 11.17 says the field is perpendicular to the equipotentials and strongest where they crowd together: your map lets you see that directly.

What to do.

  1. Draw two small circles of conducting (silver or graphite) paint or press two drawing-pin electrodes into a sheet of carbon-coated (resistive) paper about $8\ \text{cm}$ apart. Connect them to a $6\ \text{V}$ battery.
  2. Connect one lead of a digital voltmeter to the negative electrode and use the other as a probe. Find and mark about eight points where the meter reads $1.0\ \text{V}$; join them into a smooth curve.
  3. Repeat for $2$, $3$, $4$ and $5\ \text{V}$. You now have an equipotential map.
  4. Draw field lines crossing every equipotential at right angles. Estimate $E\approx\Delta V/\Delta n$ midway between the electrodes and close to one of them.
  5. Replace one round electrode with a straight painted bar and repeat. How does the map change near the straight edge and near its ends?

Tools: Resistive (carbon) paper or a conductive-ink drawing, two electrodes, a $6\ \text{V}$ battery, a digital voltmeter with a fine probe, a soft pencil and ruler. A spreadsheet or a short Python script can plot $V=k(q/r_1-q/r_2)$ for comparison.

Hand in: Your equipotential maps with field lines drawn in, your estimates of $E$ at two places, a comparison with the computed pattern for two point charges, and a paragraph explaining where the field is strongest and why.

Going further. Paint a closed ring of conducting paint between the electrodes. Measure the potential at several points inside the ring. What do you find, and which property of conductors (Result 11.19) does it demonstrate?

Instructor note: current flows in the paper, so strictly this maps a steady-current field, but its potential obeys the same equation as an electrostatic potential in two dimensions, so the shapes agree. Expect the $3\ \text{V}$ line to be close to the perpendicular bisector; deviations show up near the paper's edges. Inside the painted ring the readings are all nearly equal — a striking demonstration of shielding.

🧪 Self-check quiz

0/5 correct

Q1. Charges $+q$, $-q$, $+q$, $-q$ are placed in this order at the corners of a square of side $a$. The electric potential at the centre of the square is

Q2. A charge of $+2.0\ \mu\text{C}$ moves from a point where the potential is $50\ \text{V}$ to a point where it is $20\ \text{V}$. The work done on it by the electric field is

Q3. A thin spherical shell of radius $R$ carries charge $Q$ spread uniformly. The electric potential at a point inside it, a distance $r$ from the centre, is

Q4. Three equal charges $q$ are placed at the corners of an equilateral triangle of side $a$. The electric potential energy of the system is

Q5. Two metal spheres of radii $1\ \text{cm}$ and $3\ \text{cm}$, far apart, are connected by a thin wire and charged. The ratio of the surface charge density on the small sphere to that on the large sphere is