Chapter 4 · Introduction

Chapter 4 — Work, Energy, and Power

Force and acceleration tell you what happens instant by instant; work and energy tell you the result of a whole motion in one line. This chapter builds work, kinetic and potential energy, power and the physics of collisions.

After a road accident, investigators often have no video — only skid marks on the road and two wrecked cars resting where they stopped. From the length of the skid marks and the friction of the road they can work out how fast a car was going when the brakes locked; from the masses of the cars and the direction each slid after the impact they can work out the speeds just before it. They hardly use $\mathbf{F}=m\mathbf{a}$ at all. They use two bookkeeping rules: the work done on a body equals its change in kinetic energy, and in a collision the total momentum stays the same even when a great deal of energy disappears into crumpled metal, heat and sound.

This chapter builds those rules. You will meet work, $W=\mathbf{F}\cdot\mathbf{d}$ for a constant force and the area under the $F$–$x$ graph for a variable one, and the work–energy theorem $W_\text{net}=\Delta K$. Forces such as gravity and a spring's pull, whose work depends only on the start and end points, carry a potential energy $U$ with $F=-\dfrac{dU}{dx}$; when only they do work, $K+U$ stays constant — one equation that handles roller coasters, springs and the vertical circle. Dividing work by time gives power, $P=\mathbf{F}\cdot\mathbf{v}$. Finally, collisions put momentum and energy side by side: momentum is always conserved, kinetic energy only in an elastic collision, and the coefficient of restitution $e$ measures how much bounce is left. Energy methods are among the fastest tools in physics — a problem that takes a page with forces often takes two lines with energy — and they return in rotation, gravitation, oscillations, thermodynamics and electrostatics.

In NEET this unit is a steady source of quick marks: the work of a force read from a graph, stopping distances and ratios of kinetic energies, the speed and tension in a vertical circle, the power of a pump, the velocities after a collision. NEET's syllabus for the unit — work done by a constant and by a variable force; kinetic and potential energy; the work–energy theorem; power; the potential energy of a spring; conservation of mechanical energy; conservative and non-conservative forces; motion in a vertical circle; elastic and inelastic collisions in one and two dimensions — is covered completely by the three sections below. The same bookkeeping runs through your own body: the heart does roughly a joule of work with every beat, an average power of about a watt, and leg muscles that lift you up a flight of stairs deliver a few hundred watts while burning several times as much food energy, because their efficiency is only about one quarter.

$W=\mathbf{F}\cdot\mathbf{d}$→Area under $F$–$x$→$W_\text{net}=\Delta K$→Conservative forces→$F=-\tfrac{dU}{dx}$→$K+U=\text{constant}$→Vertical circle→$P=\mathbf{F}\cdot\mathbf{v}$→Collisions & $e$
🎯 By the end of this chapter you can…
  • find the work done by a constant force as $\mathbf{F}\cdot\mathbf{d}=Fd\cos\theta$, say when it is positive, negative or zero, and add the works of several forces;
  • find the work done by a variable force as $\int F\,dx$ or the area under the $F$–$x$ graph, including the work of a spring $-\tfrac12k\left(x_2^2-x_1^2\right)$;
  • use $K=\tfrac12mv^2=\dfrac{p^2}{2m}$ and the work–energy theorem for braking distances, bullets in blocks and bodies pushed by springs;
  • tell conservative from non-conservative forces, use $F=-\dfrac{dU}{dx}$ and find stable and unstable equilibrium from a $U$–$x$ graph;
  • apply conservation of mechanical energy, and $W_\text{nc}=\Delta(K+U)$ when friction acts, to springs, slopes and roller coasters;
  • find the speed and tension at any point of a vertical circle and the condition for completing it;
  • calculate average and instantaneous power, $P=\mathbf{F}\cdot\mathbf{v}$, and the efficiency of pumps and motors;
  • solve elastic, inelastic and perfectly inelastic collisions in one and two dimensions using momentum conservation and the coefficient of restitution;
  • solve NEET multiple-choice questions on work, energy, power and collisions in every format the paper uses — single answer, statement I / II, assertion–reason, matching lists, "how many are correct" and graph reading — quickly, by eliminating options.

A $10\ \text{g}$ bullet moving at $400\ \text{m/s}$ buries itself in a $1.99\ \text{kg}$ wooden block hanging from a $1\ \text{m}$ string. Just after the impact, what fraction of the bullet's kinetic energy is still kinetic energy (of block + bullet)?

Set the bullet speed to $400\ \text{m/s}$. Momentum is conserved in the impact, so the block and bullet move off at $V=\dfrac{0.01\times400}{2.00}=2.00\ \text{m/s}$ (Section 4.3). The readout shows the kinetic energy falling from $800\ \text{J}$ to $4.00\ \text{J}$ — only $0.5\%$ survives; the rest becomes heat, sound and shattered wood. After the impact only gravity does work, so mechanical energy is conserved during the swing (Section 4.2): the block rises $h=\dfrac{V^2}{2g}=0.204\ \text{m}$ and the string turns through $37.3^\circ$. Change the speed — the fraction kept stays $0.5\%=\dfrac{m}{m+M}$.
Teaser — The Ballistic Pendulum

A $10\ \text{g}$ bullet is fired into a $1.99\ \text{kg}$ block hanging from a light string $1.0\ \text{m}$ long, and stays in it ($g=9.8\ \text{m/s}^2$). The impact obeys momentum conservation; the swing that follows obeys energy conservation. Choose the bullet's speed and press Play (the bullet's flight is shown in slow motion). The bars compare the kinetic energy before and just after the impact.

400 m/s
speed just after impact $V$—
kinetic energy: before → after—
rise $h$ · angle of swing—

Sections in this chapter

🎯 Chapter mixed test NEET · MCQ

Eight NEET-style questions drawn from all three sections and shuffled, as in the real paper — several need momentum and energy, and nothing tells you which idea a question needs. Answer each one and press Submit (NEET marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test. The test clock is generous: at real NEET pace — about a minute per question — you should finish all eight in ten minutes, so try to beat it comfortably.

E1. NEET · MCQ Statement I: If the speed of a car is doubled, the distance in which it can be stopped by the same braking force becomes four times as large. Statement II: If the momentum of a body increases by $100\%$, its kinetic energy increases by $200\%$. In the light of these statements, choose the correct option. (A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct

Statement I Work–energy theorem: $Fs=\tfrac12mu^2$, so $s\propto u^2$ and doubling $u$ gives $4s$ (Theorem 4.4). Correct.
Statement II $K=\dfrac{p^2}{2m}$: doubling $p$ multiplies $K$ by $4$ — an increase of $300\%$, not $200\%$. Incorrect.
Answer (C).
⏱ Shortcut Turn every percentage into a factor first: $+100\%$ is $\times2$; square it, $\times4$; subtract one, $+300\%$.

E2. NEET · MCQ A $0.5\ \text{kg}$ bob on a light string $2.5\ \text{m}$ long is moving in a vertical circle with the least speed at which it can complete the circle ($g=10\ \text{m/s}^2$). The tension in the string when it is horizontal is (A) $5\ \text{N}$ (B) $30\ \text{N}$ (C) $25\ \text{N}$ (D) $15\ \text{N}$

Speed Least speed: $u^2=5gr$ at the bottom; rising by $r$ to the horizontal (Law 4.7), $v^2=u^2-2gr=3gr$.
Tension When the string is horizontal, gravity is perpendicular to it, so the tension alone is the centripetal force: $T=\dfrac{mv^2}{r}=3mg=3\times0.5\times10$.
Answer (D) $15\ \text{N}$.
⏱ Shortcut At the critical speed: $0$ at the top, $3mg$ at the side, $6mg$ at the bottom (Result 4.9) — the length $2.5\ \text{m}$ is never needed. (B) is $6mg$, the bottom; (C) is $5mg$.

E3. NEET · MCQ A $2\ \text{kg}$ block sliding at $6\ \text{m/s}$ on a smooth floor hits and sticks to a $4\ \text{kg}$ block at rest. The pair then slides onto a rough patch with $\mu_k=0.2$ ($g=10\ \text{m/s}^2$). The distance it slides on the patch before stopping is (A) $1\ \text{m}$ (B) $9\ \text{m}$ (C) $3\ \text{m}$ (D) $0.5\ \text{m}$

Collision Momentum (Result 4.12): $2\times6=6V$, so $V=2\ \text{m/s}$.
Slide Work–energy after the impact: $\mu_kMg\,d=\tfrac12MV^2$, so $d=\dfrac{V^2}{2\mu_kg}=\dfrac{4}{4}$.
Answer (A) $1\ \text{m}$.
⏱ Shortcut Momentum across the collision, energy after it. (B) uses the striker's $6\ \text{m/s}$ for the pair — energy carried through a sticking collision, which is never allowed.

E4. NEET · MCQ Assertion (A): The gravitational potential energy of a body can be negative. Reason (R): Only differences in potential energy have physical meaning, so the level at which $U=0$ may be chosen freely. Choose the correct option. (A) Both A and R are true and R is the correct explanation of A (B) Both A and R are true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Reason Potential energy is defined by $\Delta U=-W$ (Definition 4.5), which fixes only differences. True.
Assertion With the reference level at a table top, a book on the floor below has $U=-mgh\lt0$. True — and it is negative precisely because we chose where $U=0$, so R explains A.
Answer (A).

E5. NEET · MCQ The graph shows the kinetic energy $K$ of a body moving along a straight line against its displacement $x$. The net force on the body is (A) $5\ \text{N}$ along the motion (B) $5\ \text{N}$ opposite to the motion (C) $40\ \text{N}$ opposite to the motion (D) $320\ \text{N}$ opposite to the motion
102030402468K (J)x (m)0

Idea Work–energy theorem over a small step: $F_\text{net}\,dx=dK$, so $F_\text{net}=\dfrac{dK}{dx}$, the slope of the $K$–$x$ graph.
Slope $\dfrac{0-40\ \text{J}}{8\ \text{m}}=-5\ \text{N}$: constant, and negative — the force opposes the motion.
Answer (B).
⏱ Shortcut $K$ falls, so the force must oppose the motion — (A) goes. (C) reads the intercept instead of the slope, and (D) multiplies instead of dividing.

E6. NEET · MCQ Match List-I with List-II.
List-I: (a) spring constant (b) power (c) work (d) linear momentum
List-II: (i) $[\text{MLT}^{-1}]$ (ii) $[\text{ML}^2\text{T}^{-2}]$ (iii) $[\text{MT}^{-2}]$ (iv) $[\text{ML}^2\text{T}^{-3}]$
Choose the correct answer: (A) a-iii, b-ii, c-iv, d-i (B) a-i, b-iv, c-ii, d-iii (C) a-iii, b-iv, c-i, d-ii (D) a-iii, b-iv, c-ii, d-i

Each quantity $k=F/x$: $[\text{MLT}^{-2}]/[\text{L}]=[\text{MT}^{-2}]$ (iii). Power $=W/t$: $[\text{ML}^2\text{T}^{-3}]$ (iv). Work $=Fd$: $[\text{ML}^2\text{T}^{-2}]$ (ii). Momentum $=mv$: $[\text{MLT}^{-1}]$ (i).
Answer (D) a-iii, b-iv, c-ii, d-i.
⏱ Shortcut "Momentum is $[\text{MLT}^{-1}]$" removes (B) and (C); "power has $\text{T}^{-3}$" removes (A).

E7. NEET · MCQ A ball of mass $m$ moving at speed $u$ collides head-on and elastically with a ball of mass $M$ at rest, and rebounds along its original line with speed $u/2$. The ratio $M/m$ is (A) $2$ (B) $3$ (C) $\tfrac13$ (D) $4$

Result 4.14 $v_1=\dfrac{m-M}{m+M}\,u=-\dfrac u2$ (negative: it rebounds).
Solve $2(m-M)=-(m+M)$, so $3m=M$.
Answer (B) $M/m=3$.
⏱ Shortcut A ball rebounds only from a heavier target, so $M/m\gt1$ and (C) goes. Check (B): $\tfrac{1-3}{1+3}=-\tfrac12$ ✓.

E8. NEET · MCQ How many of the following statements are correct?
(i) The work done by the centripetal force on a body in uniform circular motion is zero.
(ii) A conservative force does zero work on a body taken round any closed path.
(iii) The coefficient of restitution of a perfectly inelastic collision is zero.
(iv) The kilowatt hour is a unit of power.
(v) Static friction can never do work on a body.
(A) Two (B) Four (C) Three (D) Five

Check each (i) ✓ the force is perpendicular to the velocity at every instant. (ii) ✓ Definition 4.4. (iii) ✓ the bodies do not separate. (iv) ✗ it is energy, $3.6\times10^6\ \text{J}$. (v) ✗ static friction on a crate in an accelerating truck does positive work in the ground frame.
Answer (C) three: (i), (ii) and (iii).
⏱ Shortcut Mark ✓ / ✗ in the margin as you read; "never" in (v) is a signal to hunt for one counter-example.
✅ Before you start
Work is a scalar product, so you need $\mathbf{A}\cdot\mathbf{B}=AB\cos\theta$ and its component form (Section 2.2); the area under a graph and the idea of an integral come from Section 2.1. You will use free-body diagrams, friction and Newton's second law (Section 3.2, Section 3.3), centripetal force for the vertical circle (Section 3.4), and above all momentum and its conservation (Section 3.1) for collisions. Dimensions of energy and power, $[\text{M}\text{L}^2\text{T}^{-2}]$ and $[\text{M}\text{L}^2\text{T}^{-3}]$, come from Section 1.2.