Chapter 14 · Introduction

Chapter 14 — Electromagnetic Induction and Alternating Currents

A changing magnetic flux drives an emf round a circuit. From that single fact come Lenz's law, motional emf, eddy currents, self- and mutual inductance, the AC generator, the behaviour of R, L and C on alternating current, resonance and the transformer.

In 1831 Michael Faraday wound two coils on an iron ring, connected one to a battery and the other to a galvanometer, and saw the needle kick — but only at the instant he closed or opened the switch. A steady current in the first coil did nothing to the second; a changing one drove a current through it. That flicker of a needle is the reason you can read this page. Every power station spins coils in magnetic fields to generate an alternating voltage; transformers step it up to hundreds of kilovolts for the transmission lines and down again to $230\ \text{V}$ for your home; induction cooktops heat a steel pan with currents induced inside the pan itself; and metro trains brake by turning their motors into generators.

The chapter begins with Faraday's law, $\varepsilon=-N\dfrac{d\Phi_B}{dt}$: an emf appears whenever the magnetic flux through a circuit changes — because the field changes, the area changes, or the coil turns. The minus sign is Lenz's law: the induced current always opposes the change that causes it, which is energy conservation in disguise. A rod moving through a field carries a motional emf $Blv$. Changing currents induce currents in lumps of metal (eddy currents), in a neighbouring coil (mutual inductance $M$) and in their own coil (self-inductance $L$, storing energy $\tfrac12LI^2$). A coil rotating in a field gives an alternating emf $NBA\omega\sin\omega t$; on AC, an inductor and a capacitor oppose the current through reactances $\omega L$ and $\dfrac{1}{\omega C}$, a series LCR circuit has impedance $Z$ and resonates at $\omega_0=\dfrac{1}{\sqrt{LC}}$, only the resistance takes power, $V_\text{rms}I_\text{rms}\cos\phi$, and the transformer trades voltage for current. JEE Main returns to this unit in almost every paper, mostly with quick numerical questions on flux, motional emf, inductance and LCR circuits.

Flux $\Phi_B=BA\cos\theta$→$\varepsilon=-N\tfrac{d\Phi_B}{dt}$→Lenz's law→Motional emf $Blv$→Eddy currents→$L$, $M$ and $\tfrac12LI^2$→AC generator→rms, reactance, $Z$→Resonance & power→Transformer
🎯 By the end of this chapter you can…
  • calculate magnetic flux $\Phi_B=BA\cos\theta$, and the induced emf, current and charge when it changes, $\varepsilon=-N\dfrac{d\Phi_B}{dt}$ and $q=\dfrac{N|\Delta\Phi_B|}{R}$;
  • use Lenz's law to find the direction of an induced current and explain it through conservation of energy;
  • find motional emfs — $Blv$ for a sliding rod, $\tfrac12B\omega l^2$ for a rotating rod or disc — and the magnetic braking force and terminal speed of a rod on rails;
  • explain eddy currents, their uses (braking, damping, induction heating) and how laminated cores reduce them;
  • find the self-inductance of a solenoid, the mutual inductance of two coils, the potential difference across an inductor and the energy $\tfrac12LI^2$ it stores;
  • derive the emf $NBA\omega\sin\omega t$ of an AC generator and use peak, rms and mean values of alternating quantities;
  • use reactance, impedance and phasors for R, L, C and series LCR circuits, and find the resonant frequency and the quality factor;
  • calculate average power, the power factor and wattless current, and solve ideal and real transformer problems;
  • solve JEE Main MCQ and numerical-answer problems on induction and AC circuits.

A coil of $100$ turns, each of area $0.010\ \text{m}^2$, spins in a field of $0.50\ \text{T}$ at $25$ revolutions per second. If you make it spin twice as fast ($50$ rev/s), what happens to the peak emf?

Set the frequency to $25\ \text{Hz}$ and then to $50\ \text{Hz}$. The peak flux linkage stays at $NBA=0.50\ \text{Wb}$, but the peak emf rises from $78.5\ \text{V}$ to $157.1\ \text{V}$ (rms $55.5\ \text{V}$ to $111.1\ \text{V}$), and the graph shows twice as many cycles in the same time. Faraday's law depends on how fast the flux changes, not on how large it is: $\varepsilon_0=NBA\omega$ (Section 14.3), so doubling $\omega$ doubles the peak emf as well as the frequency. Watch the coil too: the emf is largest when the plane of the coil is parallel to $\mathbf B$ — when the flux through it is zero but changing fastest.
Teaser — The AC Generator

A flat coil of $N=100$ turns, each of area $A=0.010\ \text{m}^2$, rotates at a steady rate between the poles of a magnet that produces a uniform field $B=0.50\ \text{T}$. Left: the coil seen along its axis of rotation, with its normal $\hat{\mathbf n}$. Right: the flux linkage $N\Phi_B$ (blue) and the induced emf (red) over the first $100\ \text{ms}$. Choose the rotation frequency and press Play (the rotation is shown slowed down $50$ times).

25 Hz
peak flux linkage $NBA$—
peak emf $\varepsilon_0=NBA\omega$—
rms emf · period—

Sections in this chapter

🎯 Chapter mixed test JEE Main · MCQJEE Main · Numerical

Eight problems drawn from all three sections and shuffled, as in the real paper; several join induction to inductance or to AC circuits. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette.

E1. JEE Main · Numerical A coil of $50$ turns, each of area $0.020\ \text{m}^2$, lies with its plane perpendicular to a uniform magnetic field of $0.30\ \text{T}$. In $0.10\ \text{s}$ the field is steadily reversed, to $0.30\ \text{T}$ in the opposite direction. Find the magnitude of the average induced emf in volts. Give the answer to the nearest integer.

Flux change Per turn the flux goes from $+BA$ to $-BA$: $|\Delta\Phi_B|=2BA=2\times0.30\times0.020=0.012\ \text{Wb}$.
Faraday $|\varepsilon_\text{av}|=N\dfrac{|\Delta\Phi_B|}{\Delta t}=\dfrac{50\times0.012}{0.10}=6.0\ \text{V}$ (Section 14.1).
Answer $6\ \text{V}$, i.e. $6$.
⏱ Shortcut Reversing a field is a change of $2B$, not $B$ — forgetting this gives $3\ \text{V}$.

E2. JEE Main · MCQ The voltage of a supply is $v=311\sin(100\pi t)$ volts, with $t$ in seconds. The reading of an AC voltmeter connected across it, and the earliest time after $t=0$ at which the instantaneous voltage equals that reading, are (A) $311\ \text{V}$, $5.0\ \text{ms}$ (B) $220\ \text{V}$, $2.5\ \text{ms}$ (C) $220\ \text{V}$, $5.0\ \text{ms}$ (D) $156\ \text{V}$, $1.7\ \text{ms}$

Reading AC meters read rms values (Section 14.3): $V_\text{rms}=\dfrac{311}{\sqrt2}=220\ \text{V}$.
Time $311\sin(100\pi t)=\dfrac{311}{\sqrt2}$ first when $100\pi t=\dfrac{\pi}{4}$, i.e. $t=\dfrac{1}{400}\ \text{s}=2.5\ \text{ms}$.
Answer (B).
⏱ Shortcut The period is $20\ \text{ms}$; the rms value is reached at one-eighth of a period. (C) is the time of the peak (a quarter period); (D) uses half the peak value, which is not the rms.

E3. JEE Main · Numerical When the current in coil A changes steadily at $50\ \text{A/s}$, an emf of $0.20\ \text{V}$ is induced in a nearby coil B. Find the flux linkage of coil B, in mWb, when coil A carries a steady current of $3.0\ \text{A}$. Give the answer to the nearest integer.

Mutual inductance $|\varepsilon_B|=M\left|\dfrac{dI_A}{dt}\right|$, so $M=\dfrac{0.20}{50}=4.0\times10^{-3}\ \text{H}$ (Section 14.2).
Flux linkage $N_B\Phi_B=MI_A=4.0\times10^{-3}\times3.0=1.2\times10^{-2}\ \text{Wb}$.
Answer $12\ \text{mWb}$, i.e. $12$.
⏱ Shortcut $M$ is a property of the pair of coils; once known, it gives the emf for any rate of change and the flux linkage for any steady current. A steady current induces no emf — but it still links flux.

E4. JEE Main · MCQ Two coaxial circular coils P and Q face each other. Viewed from a point on the common axis beyond Q, coil P carries a steady clockwise current. The current in P is now steadily reduced. Viewed from the same point, the current induced in Q, and the force between the coils while the current is falling, are (A) clockwise; repulsion (B) anticlockwise; attraction (C) clockwise; attraction (D) anticlockwise; repulsion

Lenz The flux through Q due to P is decreasing. The induced current in Q opposes the decrease, so it circulates in the same sense as P's current: clockwise (Section 14.1).
Force Two coaxial loops with currents in the same sense attract, like parallel currents. The attraction tries to bring Q closer — where the flux would be larger — again opposing the change.
Answer (C).
⏱ Shortcut Decreasing current: induced current in the same sense, attraction. Increasing current: opposite sense, repulsion. This is mutual induction (Section 14.2) with Lenz's law deciding the signs.

E5. JEE Main · Numerical A series circuit with $R=60\ \Omega$, $X_L=160\ \Omega$ and $X_C=80\ \Omega$ is connected to a $200\ \text{V}$ (rms) AC source. Find the rms voltage across the inductor, in volts. Give the answer to the nearest integer.

Impedance $Z=\sqrt{R^2+(X_L-X_C)^2}=\sqrt{60^2+80^2}=100\ \Omega$ (Section 14.3).
Current $I_\text{rms}=\dfrac{200}{100}=2.0\ \text{A}$, so $V_L=I_\text{rms}X_L=2.0\times160=320\ \text{V}$.
Answer $320\ \text{V}$, i.e. $320$.
⏱ Shortcut Yes, $V_L$ exceeds the source voltage: $V_L$ and $V_C=160\ \text{V}$ are in antiphase and partly cancel. Check: $\sqrt{V_R^2+(V_L-V_C)^2}=\sqrt{120^2+160^2}=200\ \text{V}$ ✓. Never add rms voltages arithmetically.

E6. JEE Main · MCQ The iron core of a transformer is made of thin sheets insulated from one another, rather than a solid block, in order to (A) reduce the energy lost to eddy currents in the core (B) reduce the resistance of the copper windings (C) increase the flux produced by a steady (DC) current in the primary (D) make the secondary voltage independent of the number of turns

Eddy currents The alternating flux in the core induces eddy currents in it, which heat the core (Section 14.2). Thin insulated sheets cut the long current loops and raise their resistance, so the eddy currents and the $I^2R$ heating become small.
Others The windings' resistance (B) is a separate copper loss; a transformer does not work on DC at all (C) because a steady current gives no changing flux; and $\dfrac{V_s}{V_p}=\dfrac{N_s}{N_p}$ always (D) (Section 14.3).
Answer (A).

E7. JEE Main · Numerical A coil of $50$ turns, each of area $0.020\ \text{m}^2$, rotates at $50$ revolutions per second about an axis in its plane perpendicular to a uniform field of $0.35\ \text{T}$. Taking $\pi=\tfrac{22}{7}$, find the peak emf induced in the coil, in volts. Give the answer to the nearest integer.

Flux With $\theta=\omega t$ the angle between the normal and $\mathbf B$, $N\Phi_B=NBA\cos\omega t$, and Faraday's law (Section 14.1) gives $\varepsilon=NBA\omega\sin\omega t$ (Section 14.3).
Numbers $\omega=2\pi\nu=2\times\tfrac{22}{7}\times50=\tfrac{2200}{7}\ \text{rad/s}$; $\ \varepsilon_0=50\times0.35\times0.020\times\tfrac{2200}{7}=110\ \text{V}$.
Answer $110\ \text{V}$, i.e. $110$.
⏱ Shortcut Use $\omega=2\pi\nu$, not $\nu$: forgetting $2\pi$ gives $17.5\ \text{V}$. The rms emf would be $\dfrac{110}{\sqrt2}\approx78\ \text{V}$.

E8. JEE Main · MCQ An ideal inductor connected to a $220\ \text{V}$, $50\ \text{Hz}$ supply draws an rms current of $2.0\ \text{A}$. The greatest energy stored in the inductor during a cycle is about (A) zero, since the inductor takes no average power (B) $0.70\ \text{J}$ (C) $2.8\ \text{J}$ (D) $1.4\ \text{J}$

Inductance $X_L=\dfrac{V_\text{rms}}{I_\text{rms}}=110\ \Omega=\omega L$, so $L=\dfrac{110}{100\pi}=0.350\ \text{H}$ (Section 14.3).
Energy The stored energy $\tfrac12Li^2$ (Section 14.2) is greatest at the peak current $i_m=\sqrt2\times2.0\ \text{A}$: $U_\text{max}=\tfrac12\times0.350\times8.0=1.40\ \text{J}$.
Answer (D).
⏱ Shortcut $U_\text{max}=LI_\text{rms}^2=\dfrac{V_\text{rms}I_\text{rms}}{\omega}=\dfrac{440}{314}\approx1.4\ \text{J}$. (A) confuses average power with stored energy: the inductor stores and returns energy twice every cycle. (B) uses $I_\text{rms}$ in $\tfrac12Li^2$.
✅ Before you start
You need the magnetic field of a long wire, a loop and a solenoid (Section 13.1), the force $I\mathbf L\times\mathbf B$ on a wire and the torque on a coil (Section 13.2); the flux idea copies electric flux (Section 11.2). Circuits use Ohm's law, electrical power and Kirchhoff's laws (Section 12.1, Section 12.2), and capacitors and the energy $\tfrac12CV^2$ (Section 11.4). Alternating quantities are sinusoidal functions with an amplitude, angular frequency and phase, exactly as in SHM (Section 10.1), and phasors are rotating vectors added by the rules of Section 2.2. From mathematics: differentiating $\sin\omega t$ and $\cos\omega t$, and the derivative as a rate of change.