16.1 Reflection and Spherical Mirrors
A mirror obeys one rule — the angle of reflection equals the angle of incidence — and from it come the upright, laterally inverted image in a plane mirror, the many images between two tilted mirrors, and, with one sign convention, the mirror formula $\frac1v+\frac1u=\frac1f$ and magnification $m=-v/u$ for every curved mirror.
A dentist tilts a small concave mirror to see the back of a tooth, magnified. A driver checks a convex mirror bolted to the door, which squeezes a whole lane of traffic into a few centimetres. Solar power stations line up thousands of curved mirrors to pour sunlight onto one boiler, and the largest telescopes on Earth gather starlight with a curved mirror many metres across. Every one of these devices works because light bounces off a polished surface by one simple law.
In this section light is treated as rays — straight lines along which energy travels. This "ray optics" is excellent whenever mirrors, lenses and openings are much larger than the wavelength of light (about half a micrometre), which covers almost every optical instrument. We state the laws of reflection, work out the images formed by plane mirrors (including the curious multiple images between two tilted mirrors), set up the language and the sign convention for spherical mirrors, and derive the mirror formula and the magnification. The same sign convention is used for refraction and lenses in Section 16.2.
Reflection and plane mirrors
A ray is a line drawn along the direction in which light energy travels; in a uniform medium it is straight. A bundle of rays is a beam: parallel (from a very distant source, such as the Sun), divergent (spreading from a point) or convergent (closing in on a point). Ray optics (geometrical optics) describes light by rays alone; it is valid when the objects, mirrors and apertures involved are much larger than the wavelength.
When a ray strikes a surface, draw the normal — the line perpendicular to the surface at the point of incidence. The angle of incidence $i$ is measured between the incident ray and the normal, and the angle of reflection $r$ between the reflected ray and the normal — not from the surface.
- The incident ray, the reflected ray and the normal to the surface at the point of incidence all lie in one plane.
- The angle of reflection equals the angle of incidence: $r=i$.
The laws hold at every point of any smooth reflecting surface, flat or curved, using the normal at that point. A ray striking along the normal ($i=0$) retraces its path. The deviation of a ray by one reflection (the angle through which its direction is turned) is $\delta=180^\circ-2i$.
A rough surface such as paper also obeys these laws at every tiny facet, but the facets point every which way, so a parallel beam is scattered in all directions (diffuse reflection). That is why we can see a page from anywhere in the room, while a mirror (regular reflection) sends the beam off in one direction only.
Rays leaving one point of an object form an image of that point where, after reflection (or refraction), they meet again.
- A real image is formed where the rays actually meet. It can be caught on a screen.
- A virtual image is formed where the rays only appear to come from — the point where their backward extensions meet. It cannot be caught on a screen, but the eye (or a camera) sees it, because the eye focuses diverging rays wherever they seem to originate.
In ray diagrams, actual rays are drawn solid and backward extensions dashed.
The plane mirror. Take a point object $O$ at perpendicular distance $d$ in front of a plane mirror. Any ray from $O$ that strikes the mirror at angle $i$ leaves at angle $i$ on the other side of the normal; extended backwards, it crosses the perpendicular from $O$ at a point $I$ behind the mirror. The two right-angled triangles formed by $O$, $I$, the foot of the perpendicular and the point of incidence are congruent (they share a side and have equal angles), so $I$ is at distance $d$ behind the mirror — the same point for every ray. All reflected rays therefore appear to come from $I$: a virtual image.
The image formed by a plane mirror is
- virtual and erect, as far behind the mirror as the object is in front of it, on the same normal;
- of the same size as the object (magnification $+1$);
- laterally inverted: left and right are interchanged (more exactly, front and back along the normal are reversed).
Consequences: if the mirror moves through $x$ along its normal (object fixed), the image moves through $2x$; if an object moves towards a fixed mirror at speed $v$, its image moves towards the mirror at speed $v$, so object and image approach each other at $2v$. To see your whole body in a plane mirror you need a mirror at least half your height, whatever your distance from it.
Rotating a mirror. Keep the incident ray fixed and turn the mirror through an angle $\theta$ about an axis in its surface perpendicular to the plane of incidence. The normal turns through $\theta$, so the angle of incidence changes by $\theta$ and the angle of reflection by $\theta$ too, in the same sense; the reflected ray, measured from the fixed incident ray, has turned through $\theta+\theta=2\theta$. This "optical lever" doubles small rotations and is used to read the tiny twists of sensitive galvanometers with a light spot on a scale.
Two inclined mirrors. Place an object between two plane mirrors whose reflecting faces make an angle $\theta$. Light reflected from mirror 1 forms an image; that image can act as an object for mirror 2, whose image acts as an object for mirror 1, and so on. Each chain stops when the latest image lies behind the next mirror (its light cannot reach that mirror's reflecting face). All the images lie on a circle centred on the line where the mirrors meet, through the object.
- If a plane mirror is turned through $\theta$ with the incident ray fixed, the reflected ray turns through $2\theta$.
- A ray reflected once from each of two plane mirrors inclined at $\theta$ (in a plane perpendicular to both) is deviated through $360^\circ-2\theta$, whatever its angle of incidence. For $\theta=90^\circ$ the ray is sent straight back, antiparallel to itself (a corner reflector).
- Number of images of an object between two mirrors at angle $\theta$, when $m=\dfrac{360^\circ}{\theta}$ is an integer: if $m$ is even, $n=m-1$; if $m$ is odd, $n=m-1$ for an object on the bisector of the angle and $n=m$ otherwise. Parallel mirrors ($\theta=0$) give infinitely many images.
The deviation rule follows from the triangle formed by the two points of reflection and the line where the mirrors meet. If the ray makes glancing angles $g_1$ and $g_2$ with the two mirrors, each reflection deviates it by $2g$, and the triangle's angles give $g_1+g_2=180^\circ-\theta$. So the total deviation is $2(g_1+g_2)=360^\circ-2\theta$ — the same for every ray.
In Interactive 1 set the angle between the mirrors to $\theta=72^\circ$ and put the object exactly on the bisector (object position $50\%$). How many images are there — and how many when you move the object to $30\%$?
A light spot is reflected onto a wall by a plane mirror. The mirror is turned through $15^\circ$ while the incident ray stays fixed. The reflected ray turns through
Spherical mirrors and the sign convention
A spherical mirror is a piece cut from a hollow sphere and polished on one side. If the reflecting surface is the inside of the sphere (curving towards the incoming light, like the inside of a spoon), it is a concave mirror; if it is the outside (bulging towards the light, like the back of a spoon), it is a convex mirror.
- The pole $P$ is the centre of the mirror's surface; the centre of curvature $C$ is the centre of the sphere of which the mirror is part, and the radius of curvature $R$ is that sphere's radius.
- The principal axis is the straight line through $P$ and $C$. The width of the reflecting surface is its aperture.
- Paraxial rays are rays close to the principal axis and making small angles with it.
- The principal focus $F$ is the point on the axis where paraxial rays parallel to the axis meet after reflection (concave mirror, real focus), or from which they appear to diverge (convex mirror, virtual focus). The focal length $f$ is the distance $PF$.
A concave mirror makes a parallel beam converge: it is a converging mirror. A convex mirror makes it diverge: a diverging mirror.
Why $f=R/2$. Let a ray parallel to the axis at height $h$ strike a concave mirror at $M$. The radius $CM$ is the normal there; call the angle of incidence $i$. The parallel ray and the axis make equal alternate angles with $CM$, so the angle $MCF$ is also $i$; the reflected ray makes angle $i$ with $CM$ on the other side. Triangle $CFM$ therefore has two equal angles $i$ and is isosceles, with $CF=FM$. Dropping a perpendicular from $F$ onto $CM$ splits it in half: $CF=\dfrac{R}{2\cos i}$. For a paraxial ray $\cos i\approx1$, so $CF=R/2$ and $F$ lies midway between $C$ and $P$. Rays further from the axis have smaller $\cos i$, a longer $CF$, and cross the axis closer to the mirror. This blurring of the focus is spherical aberration; it is why we restrict ourselves to paraxial rays (and why large telescope mirrors are made parabolic).
For paraxial rays, the focus of a spherical mirror lies midway between the pole and the centre of curvature:
$$f=\frac{R}{2}.$$For a concave mirror $F$ and $C$ lie in front of the mirror; for a convex mirror they lie behind it.
To write one formula that works for every mirror and every object position, distances must carry signs. We use the Cartesian sign convention, the same one used for lenses in the next section.
- All distances along the principal axis are measured from the pole (from the optical centre, for a lens).
- Distances measured in the direction of the incident light are positive; those measured against it are negative. (Draw the incident light travelling from left to right: then distances to the right of the pole are positive.)
- Heights measured upwards, perpendicular to the axis, are positive; downwards, negative.
With light incident from the left: a real object in front of a mirror has $u\lt0$; a real image (in front) has $v\lt0$, a virtual image (behind) $v\gt0$. A concave mirror has $R\lt0$ and $f\lt0$; a convex mirror has $R\gt0$ and $f\gt0$. An erect image has positive height, an inverted image negative.
Ray diagrams. To locate the image of the top of an object, draw any two of these four rays from it and find where they (or their extensions) meet:
- a ray parallel to the axis reflects through $F$ (concave) or as if it came from $F$ (convex);
- a ray through $F$ (or heading towards $F$ behind a convex mirror) reflects parallel to the axis;
- a ray through $C$ (or heading towards $C$) strikes the mirror along the normal and returns along itself;
- a ray striking the pole reflects symmetrically about the axis, like a ray on a plane mirror.
In the diagrams the mirror is drawn as a slightly curved line and rays are reflected at the plane through the pole — the paraxial approximation. Interactive 2 draws these rays for you from the formulas.
With light incident from the left and the Cartesian sign convention, the focal lengths of a concave mirror and of a convex mirror, each of radius of curvature $30\ \text{cm}$, are
The mirror formula and magnification
Place an object $AB$ of height $h$ on the axis of a concave mirror, beyond $C$. Draw ray 1 from the tip $B$ parallel to the axis, reflecting through $F$, and ray 4 from $B$ to the pole, reflecting symmetrically. They meet at $B'$, the tip of the image $A'B'$ of height $h'$. Let the parallel ray strike the mirror at $M$, and let $D$ be the foot of the perpendicular from $M$ to the axis; for paraxial rays $D$ practically coincides with $P$, so $DM\approx PM=AB$.
- Triangles $A'B'F$ and $PMF$ are similar (vertically opposite angles at $F$, right angles at $A'$ and $P$): $\dfrac{A'B'}{PM}=\dfrac{FA'}{FP}$, i.e. $\dfrac{A'B'}{AB}=\dfrac{FA'}{FP}$.
- Triangles $A'B'P$ and $ABP$ are similar (equal angles of incidence and reflection at $P$): $\dfrac{A'B'}{AB}=\dfrac{PA'}{PA}$.
So $\dfrac{FA'}{FP}=\dfrac{PA'}{PA}$. In magnitudes $FA'=PA'-FP$. Now put in signs: $PA=-u$, $PA'=-v$, $FP=-f$ (all three lie in front of the mirror). Then $\dfrac{-v+f}{-f}=\dfrac{-v}{-u}$, which rearranges to $uv-uf=vf$; dividing by $uvf$ gives $\dfrac1f-\dfrac1v=\dfrac1u$. The same algebra, with the signs of the convention, works for every position of the object and for convex mirrors too.
For a spherical mirror and paraxial rays, with the Cartesian sign convention, the object distance $u$, image distance $v$ and focal length $f=R/2$ satisfy
$$\frac1v+\frac1u=\frac1f .$$The linear (lateral) magnification is the ratio of image height to object height:
$$m=\frac{h'}{h}=-\frac{v}{u}=\frac{f}{f-u}=\frac{f-v}{f}.$$$m\lt0$: real, inverted image; $m\gt0$: virtual, erect image; $|m|\gt1$: magnified; $|m|\lt1$: diminished.
Where the image lands as a real object moves in from far away:
| Mirror | Object at | Image at | Nature and size |
|---|---|---|---|
| concave | infinity | $F$ | real, inverted, point-sized |
| concave | beyond $C$ | between $F$ and $C$ | real, inverted, diminished |
| concave | $C$ | $C$ | real, inverted, same size |
| concave | between $C$ and $F$ | beyond $C$ | real, inverted, magnified |
| concave | $F$ | infinity | reflected rays parallel |
| concave | between $F$ and $P$ | behind the mirror | virtual, erect, magnified |
| convex | anywhere | behind, between $P$ and $F$ | virtual, erect, diminished |
Two further results come from differentiating the mirror formula, and both are JEE favourites. Since $-\dfrac{dv}{v^2}-\dfrac{du}{u^2}=0$, we get $\dfrac{dv}{du}=-\dfrac{v^2}{u^2}=-m^2$:
- Speed of the image along the axis. If the object moves along the axis with velocity $\dfrac{du}{dt}$, the image moves with $\dfrac{dv}{dt}=-m^2\dfrac{du}{dt}$. The minus sign means the image moves the opposite way in the sign convention: an object moving towards a mirror has its image moving away from it if both are real in front.
- Longitudinal magnification. A short object of length $\Delta u$ lying along the axis forms an image of length $|\Delta v|\approx m^2\,\Delta u$. (For a long object find the images of the two ends separately.)
Measuring distances from the focus instead of the pole gives Newton's form: if the object is $x_1$ and the image $x_2$ from $F$ (both on the same side), $x_1x_2=f^2$ — handy for quick checks.
- Draw the light coming from the left. Write $u$, $f$ (and $R$) with signs: real object $u\lt0$; concave $f\lt0$, convex $f\gt0$.
- Solve $\dfrac1v=\dfrac1f-\dfrac1u$; keep the sign of $v$. Negative: real image in front; positive: virtual image behind.
- $m=-v/u$; the sign of $m$ gives erect/inverted, $|m|$ the size. $h'=mh$.
- Check with a rough ray diagram — a convex mirror must give $0\lt m\lt1$; a concave mirror gives a virtual image only for an object inside $F$.
- For moving objects use $\dfrac{dv}{dt}=-m^2\dfrac{du}{dt}$ (along the axis) and $h'=mh$ for motion perpendicular to the axis.
In Interactive 2 choose the concave mirror with $|f|=15\ \text{cm}$ and put the object $25\ \text{cm}$ away: the image is real, inverted and $1.5$ times larger, $37.5\ \text{cm}$ in front. What do you expect when you slide the object in to $10\ \text{cm}$?
1. Signs. Put the sign of every known quantity in before you substitute: a real object has $u\lt0$; a concave mirror $f\lt0$; a convex mirror $f\gt0$. Then trust the sign of $v$. Writing $f=+15\ \text{cm}$ for a concave mirror is the single commonest error.
2. Magnification of a mirror is $-v/u$. The minus sign is part of the formula (for lenses it is $+v/u$). A negative $m$ means real and inverted; a positive $m$ means virtual and erect.
3. Angles from the normal. The angle of incidence is measured from the normal, not from the mirror surface. A ray making $25^\circ$ with the mirror has $i=65^\circ$.
4. Rotating mirrors and moving mirrors double things. Mirror turned through $\theta$: reflected ray turns $2\theta$. Mirror moved through $x$: image moves $2x$. But an object moving at $v$ towards a fixed mirror has an image moving at $v$ (relative to the mirror).
5. Image speed along the axis is $m^2$ times the object speed, not $m$ times. For motion perpendicular to the axis it is $m$ times. For a long object along the axis, image the two ends separately — $m^2$ is only for short objects.
An object is $30\ \text{cm}$ in front of a mirror and the image is formed $15\ \text{cm}$ behind it. Which statement is correct?
Exercises
Use the Cartesian sign convention with the incident light travelling from left to right. All objects are real unless stated otherwise.
- 1 A ray strikes a plane mirror making an angle of $25^\circ$ with the mirror's surface. Find the angle of reflection and the deviation of the ray.
- 2 A narrow beam reflected from a small plane mirror makes a spot on a vertical scale $1.5\ \text{m}$ away, the reflected beam being initially perpendicular to the scale. The mirror turns through $3.0^\circ$. How far (in cm) does the spot move?
- 3 A girl stands $3.0\ \text{m}$ in front of a plane mirror and then walks $1.0\ \text{m}$ towards it. Find the distance between her and her image now.
- 4 A plane mirror moves away from a stationary object at $2.0\ \text{m/s}$ along its normal. Find the speed of the image relative to the object.
- 5 How many images are formed by two plane mirrors at $45^\circ$ to each other?
- 6 Two plane mirrors are at $120^\circ$. How many images of an object are formed (a) when it lies on the bisector, (b) otherwise?
- 7 Find the least length of a vertical plane mirror in which a man $1.60\ \text{m}$ tall can see his full height. Does it depend on his distance from the mirror?
- 8 Two plane mirrors face each other $40\ \text{cm}$ apart, and an object is $10\ \text{cm}$ from mirror A. Find the distances behind A of the three images in A nearest to it.
- 1 Write, with its sign, the focal length of a concave mirror of radius of curvature $36\ \text{cm}$.
- 2 A convex mirror has $f=+25\ \text{cm}$. Find its radius of curvature, with its sign.
- 3 Describe, with a ray diagram, the image formed by a concave mirror when the object is between $C$ and $F$.
- 4 Give two reasons why convex mirrors are used as rear-view mirrors and at blind corners.
- 5 A concave mirror has $|R|=30\ \text{cm}$. A ray parallel to the axis strikes it at a height of $9.0\ \text{cm}$. Where does the reflected ray cross the axis? Compare with $|f|$.
- 6 Which two principal rays are easiest to draw for a convex mirror? Use them to show that the image of a real object always lies between $P$ and $F$.
- 7 The lower half of a concave mirror forming an image on a screen is covered with black paper. What happens to the image?
- 8 A concave mirror of focal length $1.0\ \text{m}$ forms an image of the Sun, whose disc subtends $0.53^\circ$ at the Earth. Find the diameter of the image.
- 1 A concave mirror of focal length $12\ \text{cm}$ has an object $18\ \text{cm}$ in front of it. Find $v$ and $m$.
- 2 The object of part 1 is moved to $8.0\ \text{cm}$ from the mirror. Find $v$ and $m$ and describe the image.
- 3 A convex mirror of focal length $20\ \text{cm}$ has an object $30\ \text{cm}$ in front. Find $v$ and $m$.
- 4 An object $4.0\ \text{cm}$ tall is $60\ \text{cm}$ from a convex mirror of radius of curvature $40\ \text{cm}$. Find the height of the image.
- 5 A concave mirror forms a real image, three times the size of the object, on a screen $1.2\ \text{m}$ from the mirror. Find the focal length (with sign).
- 6 Where should an object be placed in front of a concave mirror of focal length $24\ \text{cm}$ to get a virtual image twice its size?
- 7 A convex mirror forms an image one-fifth the size of an object placed $40\ \text{cm}$ from it. Find its focal length.
- 8 An object $30\ \text{cm}$ in front of a concave mirror of focal length $10\ \text{cm}$ moves along the axis towards the mirror at $2.0\ \text{cm/s}$. Find the speed and direction of the image at that instant.
- 9 Use Newton's form $x_1x_2=f^2$ to find the image of an object $5.0\ \text{cm}$ beyond the focus of a concave mirror of focal length $20\ \text{cm}$; check with the mirror formula.
- 1 A concave mirror of focal length $12\ \text{cm}$ and a plane mirror face each other on a common axis, $40\ \text{cm}$ apart. A point object on the axis is $18\ \text{cm}$ from the concave mirror. Light reflects first from the concave mirror and then from the plane mirror. Find the position of the final image.
- 2 A thin rod $2.0\ \text{cm}$ long lies along the axis of a concave mirror of focal length $20\ \text{cm}$, its nearer end $30\ \text{cm}$ from the mirror. Find the exact length of its image, and compare with the estimate $m^2\times2.0\ \text{cm}$ using $m$ at the near end.
- 3 The distance between an object and its real image, twice the object's size, formed by a concave mirror is $30\ \text{cm}$. Find the focal length (with sign).
- 4 An object moves along the axis from very far away right up to the pole of a convex mirror of focal length $15\ \text{cm}$. Describe how the image moves and how its size changes.
- 5 A point object $30\ \text{cm}$ in front of a concave mirror of focal length $20\ \text{cm}$ moves perpendicular to the axis at $3.0\ \text{cm/s}$. Find the speed of its image and say which way it moves.
- 6 A solar cooker uses a concave mirror of aperture diameter $0.60\ \text{m}$ and focal length $0.50\ \text{m}$; sunlight delivers $1000\ \text{W/m}^2$, and the Sun's disc subtends $9.3\times10^{-3}\ \text{rad}$. Find the power collected and the intensity at the Sun's image.
- 7 Show that a concave mirror of focal length $f$ gives a real image $n$ times the size of the object when the object is at a distance $\dfrac{(n+1)|f|}{n}$ from the mirror.
E1. JEE Main · MCQ Two plane mirrors are inclined at $40^\circ$. A ray in a plane perpendicular to both is reflected once by each mirror. The total deviation of the ray is (A) $80^\circ$ (B) $280^\circ$ (C) $100^\circ$ (D) $140^\circ$
E2. JEE Main · Numerical An object is placed $30\ \text{cm}$ in front of a concave mirror of focal length $20\ \text{cm}$. Find the distance (in cm) of the image from the mirror. Give the answer to the nearest integer.
E3. JEE Main · MCQ An object is placed in front of a convex mirror at a distance equal to its focal length. The magnification is (A) $+\tfrac12$ (B) $+\tfrac13$ (C) $+2$ (D) infinite
E4. JEE Main · Numerical A point object moves along the principal axis of a concave mirror of focal length $24\ \text{cm}$ at $5.0\ \text{cm/s}$. Find the speed of its image (in cm/s) when the object is $36\ \text{cm}$ from the mirror. Give the answer to the nearest integer.
E5. JEE Main · MCQ A concave mirror of focal length $15\ \text{cm}$ forms an erect image three times the size of the object. The distance of the object from the mirror is (A) $20\ \text{cm}$ (B) $30\ \text{cm}$ (C) $45\ \text{cm}$ (D) $10\ \text{cm}$
E6. JEE Main · Numerical Two plane mirrors inclined at an angle $\theta$ form $9$ images of an object placed anywhere between them. Find $\theta$ in degrees. Give the answer to the nearest integer.
Research question. How accurately does the mirror formula describe a real concave mirror, and how small must the aperture be for it to hold?
Why it matters. Concentrated solar power plants in Spain, Morocco, Chile and India, solar cookers, car headlamps and the primary mirrors of telescopes all depend on curved mirrors bringing light to a well-defined focus. Engineers must decide whether a cheap spherical mirror is good enough or whether an expensive parabolic one is needed — exactly the question of paraxial rays and spherical aberration (Result 16.4). The JEE Main experiment on the focal length of a concave mirror by the $u$–$v$ (parallax) method is the classroom version.
What to do.
- Fix a concave mirror (a shaving mirror will do) on a bench. Find its focal length roughly by focusing a distant window onto a sheet of paper.
- Place a pin (or an illuminated cross-wire) on the axis at several distances beyond $F$. For each, find the real image by moving a second pin until there is no parallax between it and the image, and record $u$ and $v$ with signs.
- Plot $1/v$ against $1/u$. The mirror formula predicts a straight line of slope $-1$ whose intercepts both equal $1/f$. Find $f$ from the intercepts and from the average of $uv/(u+v)$.
- Cover the mirror with card masks having central holes of different diameters, and repeat one measurement for each. Does the sharpness of the image or its position change?
- Estimate the uncertainty in $f$ and compare the two methods.
Tools: Concave mirror, two pins in stands or a lamp with cross-wire and a screen, metre rule or optical bench, card masks, graph paper or a spreadsheet.
Hand in: A table of $u$ and $v$ with signs, the $1/v$–$1/u$ graph with its intercepts, your value of $f$ with uncertainty, and a paragraph on how the aperture affected the image.
Going further. Use Newton's form: plot $x_2$ against $1/x_1$, where $x_1$ and $x_2$ are measured from $F$. Which graph gives the most precise $f$? Research why the James Webb Space Telescope uses segmented mirrors of a non-spherical shape.
🧪 Self-check quiz
Q1. The image of an object in a plane mirror is
Q2. In the Cartesian sign convention with light incident from the left, a convex mirror has
Q3. An object is placed at the centre of curvature of a concave mirror. The image is
Q4. A mirror gives magnification $m=-2$. The image is
Q5. A point object moves along the axis of a concave mirror at speed $v_0$. At an instant when the magnification is $-3$, the speed of the image is