7.3 Fluid Flow and Viscosity
A moving fluid keeps two books: its volume flow rate $Av$ never changes along a pipe, and its energy per unit volume $p+\tfrac12\rho v^2+\rho gh$ stays constant along a streamline. Add internal friction — viscosity — and you can explain why water speeds up in a nozzle, how a wing is lifted and why a falling raindrop stops accelerating.
Put your thumb over the end of a garden hose and the water shoots out much faster and further. Hold a sheet of paper below your lips and blow over its top: the paper rises into the moving air instead of being blown down. Pour honey and water side by side, and the honey creeps while the water rushes. Drop a steel ball into a tall jar of glycerine and, after the first instant, it sinks at a perfectly steady speed. Each of these is a property of a fluid in motion.
In Section 7.2 the fluid was at rest, and pressure depended only on depth. Once the fluid flows, pressure also depends on speed, and a new property — the fluid's internal friction, or viscosity — starts to matter. In this section we describe smooth (streamline) and chaotic (turbulent) flow, derive the two great accounting rules of an ideal fluid — the equation of continuity and Bernoulli's principle — apply them to tanks, Venturi meters and aircraft wings, and then bring in viscosity: the viscous force between layers, Stokes' law, terminal velocity and the critical velocity at which smooth flow breaks up.
Streamline flow and the equation of continuity
Follow one tiny parcel of water as it moves through a pipe. Its path is a curve; at each point of that curve the parcel has some velocity. If the flow is gentle, every parcel that later passes the same point does so with exactly the same velocity — the pattern of flow is frozen in time even though the water itself is moving. This is the simplest kind of flow, and the one in which a fluid can be analysed with a few lines of algebra.
The flow of a fluid is steady (or streamline) if the velocity of the fluid at every fixed point does not change with time. The path traced by a fluid particle in steady flow is a streamline; the velocity of the fluid at any point is along the tangent to the streamline through that point. A bundle of streamlines through a small closed curve forms a tube of flow.
Flow in which the velocity at a fixed point changes erratically from moment to moment — with eddies, swirls and mixing between layers — is turbulent.
Two streamlines can never cross: at a crossing point the fluid would have two different velocities at once. So fluid inside a tube of flow stays inside it, as if the tube had walls. Where streamlines crowd together the fluid moves faster; where they spread out it moves more slowly. Smoke rising from an incense stick shows both kinds of flow: a smooth, straight column near the stick (streamline), which breaks into swirls a few centimetres higher where it has speeded up (turbulent).
For the rest of this subsection and the next we use the model of an ideal fluid: (i) it is incompressible — its density $\rho$ is the same everywhere (an excellent approximation for liquids, and for gases at speeds well below the speed of sound); (ii) it is non-viscous — no internal friction; (iii) its flow is steady; (iv) its flow is irrotational — no small whirlpools.
In the steady flow of an incompressible fluid through a tube of flow (or a pipe with no leaks), the volume flow rate is the same at every cross-section:
$$Q=A_1v_1=A_2v_2=\text{constant},$$where $A$ is the cross-sectional area and $v$ the speed of the fluid across it (taken uniform over the section). For a compressible fluid in steady flow the mass flow rate $\rho_1A_1v_1=\rho_2A_2v_2$ is constant instead. The equation of continuity is the law of conservation of mass for a flowing fluid.
Derivation. Take two cross-sections of a pipe, of areas $A_1$ and $A_2$. In a short time $\Delta t$ the fluid that crosses section 1 fills a cylinder of length $v_1\Delta t$, so a mass $\rho A_1v_1\Delta t$ enters the region between the sections; similarly a mass $\rho A_2v_2\Delta t$ leaves through section 2. In steady flow the mass between the sections does not change, so these two masses are equal and $A_1v_1=A_2v_2$. The unit of $Q$ is $\text{m}^3/\text{s}$ (note $1\ \text{L}=10^{-3}\ \text{m}^3$).
For a pipe of circular cross-section $A=\pi d^2/4$, so $\dfrac{v_2}{v_1}=\dfrac{A_1}{A_2}=\left(\dfrac{d_1}{d_2}\right)^2$: halve the diameter and the speed becomes four times as large. This is the thumb-on-the-hose effect. It also explains why a stream of water falling from a tap gets thinner as it falls: gravity speeds it up, so to carry the same $Q$ its cross-section must shrink.
Water flows steadily through a pipe whose diameter narrows from $6.0\ \text{cm}$ to $2.0\ \text{cm}$. In the wide part the speed is $0.50\ \text{m/s}$. In the narrow part the speed is
Bernoulli's principle and its applications
Continuity tells us that the fluid speeds up in a narrow part of a pipe. But something must push it to speed up. If the pipe is horizontal, the only candidate is a difference in pressure: the fluid entering the narrow part must be pushed from behind harder than it is held back in front. So where the speed is greater, the pressure is lower. Bernoulli's principle turns this idea into an exact equation by applying the work–energy theorem to a moving slab of fluid.
For the steady flow of an ideal fluid (incompressible, non-viscous, irrotational), at every point along a streamline
$$p+\tfrac12\rho v^2+\rho gh=\text{constant},$$where $p$ is the pressure, $v$ the speed and $h$ the height above a chosen reference level at that point. The three terms are the pressure energy, the kinetic energy and the gravitational potential energy per unit volume; Bernoulli's principle is the conservation of mechanical energy for a flowing fluid. Between two points 1 and 2 on the same streamline:
$$p_1+\tfrac12\rho v_1^2+\rho gh_1=p_2+\tfrac12\rho v_2^2+\rho gh_2 .$$Derivation. Consider the fluid between section 1 (area $A_1$, pressure $p_1$, speed $v_1$, height $h_1$) and section 2 (area $A_2$, pressure $p_2$, speed $v_2$, height $h_2$) of a tube of flow. In time $\Delta t$ the fluid behind section 1 pushes this body of fluid forward through a distance $v_1\Delta t$, doing work $p_1A_1v_1\Delta t=p_1\Delta V$; at section 2 the fluid ahead does work $-p_2\Delta V$ on it, where $\Delta V=A_1v_1\Delta t=A_2v_2\Delta t$ by continuity. The net effect of the motion is that a volume $\Delta V$ (mass $\Delta m=\rho\Delta V$) has been carried from section 1 to section 2 — the fluid in between is in the same state as before. So the change in kinetic energy is $\tfrac12\rho\Delta V(v_2^2-v_1^2)$ and the work done by gravity is $-\rho\Delta V\,g(h_2-h_1)$. A non-viscous fluid has no friction, so the work–energy theorem gives
$$(p_1-p_2)\Delta V-\rho\Delta V\,g(h_2-h_1)=\tfrac12\rho\Delta V(v_2^2-v_1^2).$$Dividing by $\Delta V$ and collecting the terms for each section gives Law 7.13. For a fluid at rest ($v_1=v_2=0$) it reduces to $p_1-p_2=\rho g(h_2-h_1)$ — the variation of pressure with depth from Section 7.2. Since every term has the unit $\text{Pa}=\text{J/m}^3$, you may use gauge or absolute pressures, provided you use the same kind at both points.
- Choose two points on the same streamline: one where you know everything, one where you want something. Good choices are free surfaces and jets open to the air (there $p=p_0$, atmospheric) and the surface of a wide tank (there $v\approx0$).
- Use continuity, $A_1v_1=A_2v_2$, to relate the speeds.
- Pick a reference level for $h$ and write Bernoulli's equation between the two points; cancel $p_0$ if it appears on both sides.
- Check: the pressure should be lowest where the fluid is fastest and highest (at equal speeds the lower point has the higher pressure).
$=3.0\times10^5-16\,875-58\,800=2.24\times10^5\ \text{Pa}$ (gauge).
Speed of efflux: Torricelli's law. A wide open tank holds liquid to a height $h$ above a small hole in its side. Apply Bernoulli between a point on the free surface (pressure $p_0$, speed $\approx0$ because the tank is wide, height $h$ above the hole) and a point in the jet just outside the hole (pressure $p_0$, speed $v$, height $0$): $p_0+\rho gh=p_0+\tfrac12\rho v^2$.
Liquid flows out of a small hole at depth $h$ below the free surface of a wide tank open to the air with speed
$$v=\sqrt{2gh},$$the speed a body gains in falling freely through $h$. It does not depend on the liquid's density or on the direction the hole faces. If the surface is under a gauge pressure $p_\text{g}$ (a closed tank with compressed air above the liquid), $v=\sqrt{2gh+2p_\text{g}/\rho}$.
If the tank stands on level ground with liquid to a height $H$, a jet from a hole at depth $h$ leaves horizontally at $\sqrt{2gh}$ from a height $H-h$; it falls for a time $\sqrt{2(H-h)/g}$, so it lands a horizontal distance
$$x=\sqrt{2gh}\sqrt{\frac{2(H-h)}{g}}=2\sqrt{h(H-h)}$$from the tank. The range is the same for holes at depths $h$ and $H-h$, and is greatest, $x_{\max}=H$, for a hole at the middle, $h=H/2$.
The Venturi meter. A Venturi meter measures the flow rate in a pipe. The pipe (area $A_1$) narrows smoothly to a throat (area $A_2$) and widens again. A manometer connected between the wide part and the throat measures the pressure difference. For a horizontal meter, Bernoulli and continuity give $p_1-p_2=\tfrac12\rho(v_2^2-v_1^2)$ with $v_2=v_1A_1/A_2$.
For a horizontal Venturi meter carrying a fluid of density $\rho$, with pressure difference $\Delta p=p_1-p_2$ between the wide section ($A_1$) and the throat ($A_2$):
$$v_1=\sqrt{\frac{2\,\Delta p}{\rho\left[(A_1/A_2)^2-1\right]}},\qquad Q=A_1v_1 .$$If the manometer contains a liquid of density $\rho_m$ and shows a level difference $\Delta h$, then $\Delta p=(\rho_m-\rho)g\,\Delta h$ (use $\rho_mg\,\Delta h$ when the flowing fluid is a gas).
More applications. All of these are "fast fluid, low pressure":
- Dynamic lift on a wing. An aerofoil is shaped and tilted so that air flows faster over its upper surface than under it. The pressure above is lower, and the difference, $\Delta p\approx\tfrac12\rho(v_\text{top}^2-v_\text{bottom}^2)$ (the height difference is negligible for air), acting over the wing area $A$ gives an upward lift $\Delta p\,A$. A spinning ball swerves for a related reason: the spin drags air round with it, so the air moves faster on one side than the other.
- Atomisers, spray guns and the Bunsen burner. A fast jet of air (or gas) across the top of a narrow tube lowers the pressure there below atmospheric; the liquid (or air) is pushed up the tube by the atmosphere and broken into a spray (or mixed with the gas).
- Roofs in a storm. Wind blowing fast over a roof lowers the pressure above it while the air inside stays still at atmospheric pressure; the roof can be lifted off. Two boats moving side by side, or a train and a person standing too close to the platform edge, are pushed together for the same reason.
- Blood flow. Where an artery is narrowed by a deposit, blood speeds up and its pressure falls; the outside pressure can then squeeze the artery further — one reason narrowed arteries can flutter and close.
In Interactive 1 set the inlet speed $v_1=1.0\ \text{m/s}$, the inlet gauge pressure $15\ \text{kPa}$ and the throat diameter to half the pipe diameter ($d_2/d_1=0.50$). By how much is the pressure in the throat lower than at the inlet?
Two holes of the same size are made at the same depth $h$ in two identical open tanks, one filled with water and the other with mercury. Compared with the water jet, the mercury jet leaves
Viscosity, Stokes' law and terminal velocity
Real fluids are not ideal. Stir a cup of tea and it soon stops swirling; push a spoon through honey and you feel a drag that grows with speed. When neighbouring layers of a fluid move at different speeds, each layer pulls its faster neighbour back and drags its slower neighbour forward. This internal friction is viscosity. Viscosity is why a fluid in a pipe moves fastest along the axis and is at rest right at the wall, and why a pump is needed to keep oil moving through a long pipeline even when it is level.
Picture a layer of liquid of thickness $d$ between a fixed plate and a plate of area $A$ that slides over it at speed $v$. The liquid touching each plate moves with that plate; in between, the speed changes steadily from $0$ to $v$. The rate at which the speed changes across the layers, $dv/dx$, is the velocity gradient (here $v/d$). Experiment shows that the force needed to keep the plate moving is proportional to $A$ and to $dv/dx$.
When adjacent layers of a fluid in streamline flow move with different speeds, the tangential (viscous) force between two layers of area $A$ is
$$F=\eta A\,\frac{dv}{dx},$$where $dv/dx$ is the velocity gradient perpendicular to the flow. The constant $\eta$ is the coefficient of viscosity of the fluid. Its SI unit is the pascal second, $\text{Pa s}=\text{N s m}^{-2}$ (the c.g.s. unit, the poise, is $0.1\ \text{Pa s}$); its dimensions are $[\text{ML}^{-1}\text{T}^{-1}]$.
Typical values near $20^\circ\text{C}$: air $1.8\times10^{-5}\ \text{Pa s}$, water $1.0\times10^{-3}\ \text{Pa s}$, blood about $3$–$4\times10^{-3}\ \text{Pa s}$, engine oil $0.1$–$0.3\ \text{Pa s}$, glycerine about $1.5\ \text{Pa s}$, honey about $10\ \text{Pa s}$. The viscosity of liquids falls sharply as they are heated (warm honey pours easily) because the molecules escape their neighbours more easily; the viscosity of gases rises slightly with temperature, because faster molecules carry more momentum between layers.
Stokes' law. A small sphere moving slowly through a viscous fluid drags a thin shell of fluid with it and sets up velocity gradients around itself. The resulting drag depends only on the viscosity $\eta$, the radius $r$ and the speed $v$; dimensional analysis already forces it to be proportional to $\eta rv$, and a full calculation supplies the factor $6\pi$.
A sphere of radius $r$ moving with speed $v$ through a fluid of viscosity $\eta$ experiences a viscous drag, opposite to its velocity, of magnitude
$$F=6\pi\eta rv .$$Conditions: the flow round the sphere must be streamline (slow motion, small sphere — in practice a Reynolds number $\rho_f v(2r)/\eta$ well below $1$), the fluid must extend far from the sphere in all directions, and the sphere must be rigid and smooth.
Terminal velocity. Release a sphere of density $\rho$ and radius $r$ in a fluid of density $\sigma$. Three forces act on it: its weight $W=\tfrac43\pi r^3\rho g$ down, the buoyant force $B=\tfrac43\pi r^3\sigma g$ up, and the viscous drag $6\pi\eta rv$ up (opposing the motion). At first $v=0$ and the drag is zero, so the sphere accelerates; as it speeds up the drag grows, the net force shrinks, and the speed approaches a limiting value at which the forces balance.
A sphere of radius $r$ and density $\rho$ falling through a fluid of density $\sigma$ and viscosity $\eta$ (with Stokes' law valid) reaches the terminal velocity
$$v_t=\frac{2r^2(\rho-\sigma)g}{9\eta},$$found from $6\pi\eta rv_t=\tfrac43\pi r^3(\rho-\sigma)g$. At $v_t$ the net force is zero, so the sphere moves at constant velocity. If $\sigma\gt\rho$ (an air bubble in water) $v_t$ is negative: the sphere rises at its terminal velocity. The speed grows as $v=v_t\left(1-e^{-t/\tau}\right)$ with time constant $\tau=\dfrac{2\rho r^2}{9\eta}$.
Two consequences are tested again and again: $v_t\propto r^2$ (a sphere twice as wide falls four times as fast), and $v_t\propto(\rho-\sigma)$ (the buoyancy matters). Turned round, Result 7.17 is a way of measuring viscosity: drop a steel ball of known radius into a tall jar of the liquid, time it between two marks well below the surface (where it has reached $v_t$), and compute $\eta=\dfrac{2r^2(\rho-\sigma)g}{9v_t}$. Millikan used the same law, in air, to find the radius of his tiny charged oil drops.
Critical velocity and the Reynolds number. Streamline flow does not last at high speeds. Water flowing slowly through a glass tube with a thin thread of dye in it keeps the thread straight; as the speed is raised, at a definite speed the thread suddenly wavers and breaks up, colouring the whole tube. What decides this is the competition between the fluid's inertia (which tends to carry disturbances along and amplify them) and its viscosity (which smooths them out). The ratio of the two is a dimensionless number.
For a fluid of density $\rho$ and viscosity $\eta$ flowing with speed $v$ through a pipe of diameter $D$, the Reynolds number is
$$\text{Re}=\frac{\rho vD}{\eta}\quad(\text{dimensionless}).$$In pipes the flow is streamline for $\text{Re}$ below about $1000$, turbulent for $\text{Re}$ above about $2000$, and unstable (changing between the two) in between. The critical velocity $v_c$ is the speed above which streamline flow becomes turbulent:
$$v_c=\frac{\text{Re}_c\,\eta}{\rho D}.$$So streamline flow is favoured by a viscous fluid, a low density, a narrow pipe and a low speed. For water ($\eta=1.0\times10^{-3}\ \text{Pa s}$) in a $2.0\ \text{cm}$ pipe, with $\text{Re}_c=2000$, $v_c=\dfrac{2000\times1.0\times10^{-3}}{1000\times0.020}=0.10\ \text{m/s}$: ordinary tap water, moving at about $1\ \text{m/s}$, is turbulent. Turbulence wastes energy as heat and noise, so engineers streamline cars, aircraft and pipe bends; but it also mixes things well, which is exactly what you want in a combustion chamber or when stirring sugar into tea. Bernoulli's equation and Stokes' law both assume streamline flow.
In Interactive 2 choose a steel ball, set $\eta=1.5\ \text{Pa s}$ and radius $1.0\ \text{mm}$: the terminal velocity reads about $9.5\ \text{mm/s}$. Predict the terminal velocity when you double the radius to $2.0\ \text{mm}$.
1. Diameter versus area in continuity. $A_1v_1=A_2v_2$ uses areas. If the diameter (or radius) halves, the speed becomes $4$ times, not $2$ times. The same square appears in Venturi problems through $(A_1/A_2)^2$.
2. Measuring $h$ from the wrong place. In Torricelli's law $h$ is the depth of the hole below the free surface, not its height above the bottom. In the range formula $2\sqrt{h(H-h)}$ the fall height is $H-h$ (plus the height of any stand the tank is on).
3. Mixing gauge and absolute pressures in Bernoulli's equation. Use the same kind at both points. A jet or free surface open to the air is at $p_0$ (gauge $0$). A closed, pressurised tank adds $2p_\text{g}/\rho$ to $v^2$.
4. Forgetting buoyancy or using the diameter in Stokes' law. Terminal velocity contains $(\rho-\sigma)$, not $\rho$, and $r$ is the radius. When drops merge, the radius grows as $n^{1/3}$, so $v_t$ grows as $n^{2/3}$ — not $n$.
5. Using Bernoulli or Stokes outside their conditions. Both assume streamline flow; Bernoulli also assumes no viscosity and applies along one streamline. Above the critical velocity (high Reynolds number) neither applies as written.
A small steel ball falls through oil at its terminal velocity of $2.0\ \text{cm/s}$. A second ball of the same steel but three times the radius is dropped into the same oil. Assuming Stokes' law still holds, its terminal velocity is
Exercises
Take $g=9.8\ \text{m/s}^2$, the density of water $1.0\times10^3\ \text{kg/m}^3$, its viscosity $1.0\times10^{-3}\ \text{Pa s}$ and atmospheric pressure $1.013\times10^5\ \text{Pa}$ unless told otherwise. Treat liquids as ideal (incompressible and non-viscous) in Cards I and II.
- 1 Water flows at $0.80\ \text{m/s}$ through a pipe of diameter $5.0\ \text{cm}$. Find the volume flow rate (in L/s) and the mass flow rate.
- 2 The pipe in part 1 narrows to a diameter of $2.0\ \text{cm}$. Find the speed in the narrow part.
- 3 Blood leaves the heart through the aorta (radius $1.0\ \text{cm}$) at an average $0.30\ \text{m/s}$ and eventually passes through capillaries of radius $4.0\ \mu\text{m}$ at about $0.50\ \text{mm/s}$. Estimate the number of capillaries.
- 4 How long does a hose of diameter $4.0\ \text{cm}$, delivering water at $2.5\ \text{m/s}$, take to fill a $50\ \text{m}^3$ swimming pool? Give the answer in hours.
- 5 Water leaves a tap of diameter $1.2\ \text{cm}$ at $0.50\ \text{m/s}$. Find the diameter of the falling stream $15\ \text{cm}$ below the tap.
- 6 Explain why two streamlines can never cross, and what crowding of streamlines tells you about the speed.
- 7 A river $20\ \text{m}$ wide and $4.0\ \text{m}$ deep flows at $0.50\ \text{m/s}$. At a gorge it is $8.0\ \text{m}$ wide and $2.5\ \text{m}$ deep. Find its speed in the gorge.
- 8 Smoke rises from an incense stick in a smooth column that breaks into swirls a few centimetres higher. Name the two kinds of flow and explain why the change happens where it does.
- 1 Water flows through a horizontal pipe. At a wide section the speed is $2.0\ \text{m/s}$ and the pressure $1.8\times10^5\ \text{Pa}$; at a narrow section the speed is $5.0\ \text{m/s}$. Find the pressure at the narrow section.
- 2 Find the speed of efflux from a small hole $3.2\ \text{m}$ below the surface of water in a wide open tank.
- 3 The hole in part 2 has area $1.0\ \text{cm}^2$. Find the rate of outflow in L/s.
- 4 An open tank on a $1.2\ \text{m}$ high stand holds water $1.6\ \text{m}$ deep. A small hole is made at the bottom of its side. How far from the tank does the jet hit the ground?
- 5 A tank on level ground holds water $3.0\ \text{m}$ deep. At what heights above the ground can a hole be made so that the jet lands $2.0\ \text{m}$ from the tank?
- 6 A horizontal Venturi meter has pipe diameter $8.0\ \text{cm}$ and throat diameter $4.0\ \text{cm}$. With water flowing, the pressure difference is $18\ \text{kPa}$. Find the flow rate in L/s.
- 7 At cruising altitude (air density $0.90\ \text{kg/m}^3$) the air moves at $250\ \text{m/s}$ over the upper surface of an airliner's wings and $230\ \text{m/s}$ under them. The total wing area is $80\ \text{m}^2$. Find the lift.
- 8 A wind of $30\ \text{m/s}$ blows over a flat roof of area $150\ \text{m}^2$; the air inside the house is still. Find the net force on the roof (density of air $1.2\ \text{kg/m}^3$).
- 9 Two boats sailing side by side close together tend to be drawn towards each other. Explain using Bernoulli's principle.
- 1 A plate of area $0.040\ \text{m}^2$ slides at $0.15\ \text{m/s}$ over a $0.50\ \text{mm}$ film of oil ($\eta=0.20\ \text{Pa s}$) on a fixed surface. Find the force needed to keep it moving.
- 2 Write the SI unit and the dimensional formula of the coefficient of viscosity, and convert $15$ poise to SI units.
- 3 Find the viscous drag on a sphere of radius $2.0\ \text{mm}$ moving at $5.0\ \text{cm/s}$ through oil of viscosity $0.80\ \text{Pa s}$ (in mN).
- 4 A glass bead of radius $0.50\ \text{mm}$ (density $2500\ \text{kg/m}^3$) falls through oil of density $900\ \text{kg/m}^3$ and viscosity $0.50\ \text{Pa s}$. Find its terminal velocity in mm/s.
- 5 An air bubble of radius $1.0\ \text{mm}$ rises through glycerine (density $1260\ \text{kg/m}^3$, $\eta=1.5\ \text{Pa s}$). Neglecting the density of air, find its terminal velocity in mm/s.
- 6 A steel ball of radius $1.5\ \text{mm}$ (density $7.8\times10^3\ \text{kg/m}^3$) falls at constant speed through $20\ \text{cm}$ of a liquid of density $1.2\times10^3\ \text{kg/m}^3$ in $4.0\ \text{s}$. Find the viscosity of the liquid.
- 7 Taking the critical Reynolds number as $2000$, find the critical velocity for water in a tube of diameter $1.0\ \text{cm}$. Is a flow at $0.50\ \text{m/s}$ streamline or turbulent?
- 8 Blood (density $1060\ \text{kg/m}^3$, $\eta=4.0\times10^{-3}\ \text{Pa s}$) flows at $0.30\ \text{m/s}$ through an aorta of diameter $2.0\ \text{cm}$. Find the Reynolds number and say whether the flow is likely to be streamline.
- 1 A wide open tank of cross-section $0.50\ \text{m}^2$ holds water $1.8\ \text{m}$ deep and drains through a hole of area $1.0\ \text{cm}^2$ in its base. Find the initial speed of efflux and, using $A\,dh/dt=-a\sqrt{2gh}$, the time the tank takes to empty.
- 2 A closed tank holds water with air above it at a gauge pressure of $50\ \text{kPa}$. Find the speed of efflux from a hole $2.0\ \text{m}$ below the water surface.
- 3 A horizontal syringe has a piston of area $2.0\ \text{cm}^2$ and a very fine needle. The piston is pushed with a force of $2.0\ \text{N}$. Find the speed of the water leaving the needle (neglect the piston's speed and viscosity).
- 4 A siphon tube of uniform bore drains water from a tank; its outlet is $0.80\ \text{m}$ below the water surface and its highest point $0.50\ \text{m}$ above it. Find the speed of the water in the tube and the absolute pressure at its highest point.
- 5 Two spheres of the same material, of radii in the ratio $1:3$, fall through the same liquid at their terminal velocities. Find the ratios of their terminal velocities and of the viscous forces on them.
- 6 The same steel ball (density $7800\ \text{kg/m}^3$) is dropped into liquid A (density $1000\ \text{kg/m}^3$, $\eta=0.40\ \text{Pa s}$) and liquid B (density $1300\ \text{kg/m}^3$, $\eta=1.2\ \text{Pa s}$). Find the ratio of its terminal velocities $v_A/v_B$.
- 7 (Modelling) A skydiver reaches a terminal speed of about $55\ \text{m/s}$. Show that Stokes' law cannot be used for this motion (estimate the Reynolds number with a body size of $0.5\ \text{m}$ in air of density $1.2\ \text{kg/m}^3$), and explain why a terminal speed still exists.
E1. JEE Main · MCQ Water flows steadily through a horizontal pipe. At section A the diameter is $6.0\ \text{cm}$ and the speed $1.0\ \text{m/s}$; at section B the diameter is $2.0\ \text{cm}$. The pressure at A exceeds that at B by (density of water $1000\ \text{kg/m}^3$) (A) $4.0\ \text{kPa}$ (B) $8.0\ \text{kPa}$ (C) $40\ \text{kPa}$ (D) $80\ \text{kPa}$
E2. JEE Main · Numerical An open tank stands on a platform $80\ \text{cm}$ above level ground and contains water to a depth of $20\ \text{cm}$. A small hole is opened in its side at the bottom of the tank. Find the horizontal distance, in cm, from the hole to the point where the jet strikes the ground. Give the answer to the nearest integer.
E3. JEE Main · Numerical A tiny water droplet falls through air with a terminal velocity of $6.0\ \text{cm/s}$. Sixty-four identical droplets coalesce to form one drop. Assuming Stokes' law holds and neglecting the density of air, find the terminal velocity of the new drop in cm/s. Give the answer to the nearest integer.
E4. JEE Main · MCQ A liquid flows through a pipe. The pipe is replaced by one of twice the diameter, and the liquid by another of the same density but twice the viscosity. The critical velocity for the onset of turbulence (A) stays the same (B) doubles (C) becomes half (D) becomes four times
E5. JEE Main · Numerical A light aircraft of mass $3600\ \text{kg}$ flies level. Its wings have a total area of $40\ \text{m}^2$, and the air flows past their lower surface at $70\ \text{m/s}$. Taking the density of air as $1.2\ \text{kg/m}^3$ and $g=10\ \text{m/s}^2$, and assuming the lift comes entirely from the pressure difference between the two surfaces, find the speed (in m/s) of the air over the upper surface. Give the answer to the nearest integer.
E6. JEE Main · MCQ A closed tank contains water with compressed air above it at a gauge pressure of $1.5\times10^5\ \text{Pa}$. Water flows out of a small hole $5.0\ \text{m}$ below the water surface. Taking $g=10\ \text{m/s}^2$, the speed of efflux is (A) $10\ \text{m/s}$ (B) $17.3\ \text{m/s}$ (C) $14.1\ \text{m/s}$ (D) $20\ \text{m/s}$
Research question. How does the viscosity of a household liquid (honey, glycerine, cooking oil or shampoo) change with temperature — and is Stokes' law a reliable way to measure it?
Why it matters. Viscosity decides how fast engine oil reaches the bearings on a cold morning, how easily blood flows through narrowed arteries, how quickly lava from a volcano spreads, and how food and cosmetic factories size their pumps. Oil grades such as "10W-40" are a statement about how viscosity changes between a cold start and hot running. The falling-ball method in Result 7.17 is a standard laboratory technique precisely because it needs only a ruler, a clock and a ball.
What to do.
- Fill a tall transparent jar or measuring cylinder (at least $25\ \text{cm}$ deep) with the liquid. Mark two lines with tape, the upper one at least $5\ \text{cm}$ below the surface.
- Measure the diameter of several small steel balls (ball bearings) with a screw gauge, and find the densities of the steel and the liquid (mass and volume).
- Drop each ball gently at the centre of the jar and time it between the marks (a phone slow-motion video helps). Check that the time between the first and second halves of the marked distance is the same — that is, the ball has reached $v_t$.
- Plot $v_t$ against $r^2$. Is it a straight line through the origin? From its slope find $\eta$ using $v_t=\tfrac{2(\rho-\sigma)g}{9\eta}r^2$, and estimate $\text{Re}$ for the largest ball.
- Repeat with the jar warmed (stand it in warm water) and cooled (in a fridge), measuring the liquid's temperature each time.
Tools: Tall jar or cylinder, steel balls of 2–5 mm, screw gauge, metre rule, stopwatch or phone video, kitchen thermometer, graph paper or a spreadsheet.
Hand in: The $v_t$–$r^2$ graph with its best-fit line, your value of $\eta$ with an uncertainty, a table of $\eta$ against temperature, and a paragraph on whether Stokes' law was valid for each ball.
Going further. The walls of the jar slow the ball down a little. Repeat with a narrower and a wider container and estimate how big this "wall effect" is. Then look up how the viscosity of a liquid typically falls with temperature, and test whether $\ln\eta$ against $1/T$ is a straight line for your data.
🧪 Self-check quiz
Q1. The equation of continuity for the steady flow of an incompressible fluid expresses the conservation of
Q2. For a small sphere falling through a viscous liquid under Stokes' law, the terminal velocity is proportional to
Q3. Bernoulli's principle for an ideal fluid is a statement of the conservation of
Q4. A liquid flows steadily through a horizontal pipe of varying cross-section. The pressure is lowest where
Q5. Streamline flow is most likely for a liquid of