10.4 Superposition, Standing Waves and Beats
When waves meet, their displacements simply add. A wave and its reflection add up to a standing wave, $y=2a\sin kx\cos\omega t$, so a string or an air column can ring only at its harmonics — $\nu_n=nv/2L$ for a string or an open pipe, odd multiples of $v/4L$ for a closed pipe — and two close frequencies give beats at $|\nu_1-\nu_2|$.
Pluck a guitar string and it does not sound every frequency: it sounds one clear note, plus fainter notes at exactly two, three, four… times that frequency, and nothing in between. Blow across the mouth of an empty bottle and you hear a single deep hum; pour in some water and the hum rises. A tabla player taps the drum skin and tightens its straps until two notes stop "wobbling" against each other. All of this is the physics of waves meeting other waves.
The key is one simple rule: when two waves pass through the same place, the displacement there is just the sum of the displacements each wave would cause on its own. In this section we use that rule to combine two waves of the same frequency (interference), to see what happens when a wave is reflected from a fixed or a free end, to build standing waves from a wave and its reflection, to find the normal modes — fundamental and harmonics — of strings and of open and closed organ pipes (including the resonance tube of the JEE Main experiment), and finally to explain beats. Everything rests on the progressive-wave relation $y=a\sin(kx-\omega t+\phi)$ of Section 10.3.
The principle of superposition
Send a hump along a stretched rope from each end. The two pulses run towards each other, overlap for a moment — the rope then has the shape you get by adding the two humps point by point — and then emerge from the meeting place exactly as they went in, each continuing on its way as if the other had never been there. Waves do not bounce off or damage each other; they pass through each other.
When two or more waves travel through the same region of a medium, the resultant displacement of any particle at any instant is the (vector) sum of the displacements that the individual waves would produce there:
$$y(x,t)=y_1(x,t)+y_2(x,t)+\cdots$$Each wave continues unaffected after the waves have crossed. The principle holds when the restoring force is proportional to the displacement (a linear medium) — true for waves of small amplitude, which is the case in all JEE Main problems.
The most important case is two waves of the same frequency (and wavelength) travelling the same way, with amplitudes $a_1$ and $a_2$ and a phase difference $\phi$ between them: $y_1=a_1\sin(kx-\omega t)$ and $y_2=a_2\sin(kx-\omega t+\phi)$. At each point both are SHMs of the same frequency, and adding two such SHMs is like adding two vectors (phasors) of lengths $a_1$ and $a_2$ at an angle $\phi$.
The resultant is a wave of the same frequency and wavelength, $y=A\sin(kx-\omega t+\delta)$, with
$$A=\sqrt{a_1^2+a_2^2+2a_1a_2\cos\phi},\qquad \tan\delta=\frac{a_2\sin\phi}{a_1+a_2\cos\phi}.$$Since the energy carried (the intensity) is proportional to the square of the amplitude, $I=I_1+I_2+2\sqrt{I_1I_2}\cos\phi$.
- Constructive: $\phi=0,2\pi,4\pi,\dots$ (path difference $0,\lambda,2\lambda,\dots$): $A_\text{max}=a_1+a_2$.
- Destructive: $\phi=\pi,3\pi,\dots$ (path difference $\lambda/2,3\lambda/2,\dots$): $A_\text{min}=|a_1-a_2|$.
So $\dfrac{I_\text{max}}{I_\text{min}}=\left(\dfrac{a_1+a_2}{a_1-a_2}\right)^2$. A path difference $\Delta x$ gives a phase difference $\phi=\dfrac{2\pi}{\lambda}\Delta x$.
Interference is the redistribution of energy that occurs when two waves of the same frequency with a constant phase difference superpose: where they arrive in phase the resultant is large (constructive interference), where they arrive in opposite phase it is small or zero (destructive interference). Energy is not destroyed; it is moved from the places of destructive interference to those of constructive interference.
Two loudspeakers driven by the same amplifier are a good example: walking across the room in front of them, you pass through loud and quiet spots, according to whether the path difference from the two speakers is a whole number of wavelengths or an odd number of half-wavelengths. Noise-cancelling headphones do the same deliberately — they play the incoming noise back with its phase reversed, so that the two cancel at your ear.
Two waves of the same frequency and the same amplitude $a$ travel together with a phase difference of $2\pi/3$. The amplitude of the resultant wave is
Reflection of waves and standing waves
A wave reaching the end of a string, or the end of a pipe, is reflected. What comes back depends on the end.
- Rigid (fixed) end — a string tied to a wall: the end cannot move, so the reflected wave must cancel the incident wave there. The reflected wave is inverted (a crest returns as a trough): a phase change of $\pi$.
- Free end — a string ending in a light ring that slides on a smooth rod: the end can move freely and the slope there is zero. The reflected wave returns upright: no phase change.
- Joint of two strings: a wave going from a lighter to a heavier string (into a slower medium) is partly reflected inverted, like a fixed end; from heavier to lighter it is reflected upright, like a free end. The transmitted wave is never inverted. The frequency is the same for all three waves.
- Sound in a pipe: at a closed end the air cannot move (a displacement node, where the pressure varies most); at an open end the air moves freely and the pressure stays at atmospheric (a displacement antinode, a pressure node).
Take an incident wave travelling towards $-x$, $y_i=a\sin(kx+\omega t)$, and a rigid end at $x=0$. The reflected wave travels towards $+x$ with the same amplitude and must make $y_i+y_r=0$ at $x=0$ for all $t$; that is $y_r=a\sin(kx-\omega t)$, since $\sin(\omega t)+\sin(-\omega t)=0$. (Compared with the incident wave written as $a\sin(\omega t+kx)$, the reflected wave $-a\sin(\omega t-kx)$ carries the minus sign of the phase change $\pi$.) Adding them with $\sin A+\sin B=2\sin\dfrac{A+B}{2}\cos\dfrac{A-B}{2}$:
$$y=a\sin(kx+\omega t)+a\sin(kx-\omega t)=2a\sin kx\cos\omega t .$$This is no longer a travelling wave: $x$ and $t$ appear in separate factors. Every particle performs SHM, $\cos\omega t$, with its own fixed amplitude $2a\sin kx$; the shape swells and shrinks in place without moving along the string.
Two waves of equal amplitude $a$ and equal frequency travelling in opposite directions superpose to give a standing wave. With a displacement node at $x=0$ (rigid end),
$$y=2a\sin kx\cos\omega t ,$$and with a displacement antinode at $x=0$ (free end), $y=2a\cos kx\cos\omega t$. The amplitude at position $x$ is $|2a\sin kx|$ (or $|2a\cos kx|$).
- Nodes (zero amplitude) for $\sin kx=0$: $x=0,\ \dfrac{\lambda}{2},\ \lambda,\ \dfrac{3\lambda}{2},\dots$
- Antinodes (amplitude $2a$) for $\sin kx=\pm1$: $x=\dfrac{\lambda}{4},\ \dfrac{3\lambda}{4},\ \dfrac{5\lambda}{4},\dots$
- Adjacent nodes (or antinodes) are $\lambda/2$ apart; a node and the next antinode are $\lambda/4$ apart.
- All particles between two adjacent nodes move in phase; particles in neighbouring loops move in opposite phase.
A standing (or stationary) wave is the pattern of vibration formed by two identical waves travelling in opposite directions: the waveform does not travel and no energy is transported past any node. A node is a point that is permanently at rest; an antinode is a point where the amplitude is greatest. Between nodes, energy surges back and forth between kinetic (all particles passing the mean position together) and elastic potential (all at their extremes together).
Compare the two kinds of wave carefully. In a progressive wave all particles have the same amplitude and their phases change steadily along $x$; energy flows. In a standing wave the amplitude changes with position (from $0$ at nodes to $2a$ at antinodes), the phase is the same within a loop and jumps by $\pi$ at each node, and there is no net flow of energy. In a sound standing wave, the displacement nodes are pressure antinodes and vice versa: where the air does not move, it is squeezed and stretched the most.
In a standing wave of wavelength $\lambda$, the distance between a node and the nearest antinode is
Normal modes of strings and organ pipes
On a string of length $L$ fixed at both ends, waves bounce back and forth. A standing wave can survive only if both ends are nodes, i.e. if a whole number of half-wavelengths fits exactly into the length: $L=n\dfrac{\lambda}{2}$. Any other frequency is quickly killed by the reflections cancelling each other. The allowed patterns are the natural ways the string can vibrate.
A string of length $L$, tension $T$ and linear mass density $\mu$, fixed at both ends, can vibrate in standing waves with
$$\lambda_n=\frac{2L}{n},\qquad \nu_n=\frac{nv}{2L}=\frac{n}{2L}\sqrt{\frac{T}{\mu}},\qquad n=1,2,3,\dots$$The $n$-th mode has $n$ loops, $n+1$ nodes (counting the ends) and $n$ antinodes. All whole-number multiples of the lowest frequency $\nu_1=\dfrac{1}{2L}\sqrt{\dfrac{T}{\mu}}$ occur. For the fundamental: $\nu\propto\dfrac1L$ (at fixed $T,\mu$), $\nu\propto\sqrt T$, $\nu\propto\dfrac{1}{\sqrt\mu}$ — the "laws of vibrating strings" used with a sonometer.
The normal modes of a vibrating system are the patterns in which every part oscillates with the same frequency; their frequencies are its natural frequencies. The lowest is the fundamental mode (first harmonic), of frequency $\nu_1$. A natural frequency equal to $n\nu_1$ is the $n$-th harmonic. The natural frequencies above the fundamental, in order, are the first, second, … overtones. For a string, the first overtone is the second harmonic; in general the $(n-1)$-th overtone is the $n$-th harmonic. A system that has only odd harmonics (a closed pipe, below) has first overtone $=$ third harmonic.
A plucked or bowed string usually vibrates in several modes at once; the mixture of harmonics gives an instrument its tone quality (timbre), while the fundamental fixes the pitch. A guitarist touching a string lightly at its midpoint kills every mode that does not have a node there, leaving only the even harmonics — a "harmonic" an octave up. In a sonometer a wire is stretched over two bridges by a hanging mass; when its fundamental equals the frequency of a tuning fork held on the box, the wire vibrates strongly (resonance) and a paper rider placed on it jumps off.
Organ pipes. Air columns have normal modes too. At a closed end the air is held still (displacement node); at an open end it moves most (displacement antinode). Draw the displacement pattern of each mode and count quarter-wavelengths.
With $v$ the speed of sound and $L$ the length of the pipe:
- Closed pipe (closed at one end, open at the other): node at the closed end, antinode at the open end, so $L=(2n-1)\dfrac{\lambda}{4}$ and $$\nu=\frac{(2n-1)\,v}{4L},\qquad n=1,2,3,\dots$$ Only odd harmonics occur: $\nu_1,\ 3\nu_1,\ 5\nu_1,\dots$ with $\nu_1=\dfrac{v}{4L}$.
- Open pipe (open at both ends): antinodes at both ends, so $L=n\dfrac{\lambda}{2}$ and $$\nu=\frac{nv}{2L},\qquad n=1,2,3,\dots$$ All harmonics occur, with $\nu_1=\dfrac{v}{2L}$ — twice the fundamental of a closed pipe of the same length.
End correction. The antinode at an open end lies slightly outside the pipe, at about $e\approx0.3d$ beyond it ($d$ the internal diameter, so $e\approx0.6r$). Then a closed pipe has $\nu_1=\dfrac{v}{4(L+e)}$ and an open pipe $\nu_1=\dfrac{v}{2(L+2e)}$.
The resonance tube. The JEE Main experiment on the speed of sound in air (Unit 20, Experimental Skills) uses a closed pipe of adjustable length: a glass tube whose lower end dips into water, the water level set by a reservoir. A tuning fork of frequency $\nu$ is held over the open end and the air column is lengthened from zero. The sound swells loudly at a length $l_1$ (first resonance) and again at $l_2$ (second resonance). With the end correction $e$,
$$l_1+e=\frac{\lambda}{4},\qquad l_2+e=\frac{3\lambda}{4}\quad\Longrightarrow\quad \lambda=2(l_2-l_1),\quad v=2\nu(l_2-l_1),\quad e=\frac{l_2-3l_1}{2}.$$Using the difference of the two lengths removes the end correction from the result — the reason the experiment needs two resonances.
- Decide the ends: fixed string end or closed pipe end = displacement node; open pipe end = antinode (plus the end correction if the diameter is given).
- Sketch the mode and count: node to node or antinode to antinode $=\lambda/2$; node to antinode $=\lambda/4$. Express $L$ in terms of $\lambda$.
- Find $v$: $\sqrt{T/\mu}$ on a string, the given speed of sound (or $\sqrt{\gamma RT/M}$) in a pipe. Then $\nu=v/\lambda$.
- Two consecutive natural frequencies: their difference is $\nu_1$ for a string or open pipe and $2\nu_1$ for a closed pipe. If the ratios are $1:2:3$ it is a string or open pipe; $1:3:5$ means a closed pipe.
- "Unison" means equal frequencies; "first overtone" of a closed pipe is the third harmonic, $3v/4L$.
In Interactive 1 choose the closed pipe, set $L=0.85\ \text{m}$ and select mode $2$. What frequency does the pipe sound, and what is this mode called?
Which of these frequencies can a pipe of length $L$ closed at one end not produce? ($v$ is the speed of sound; ignore end correction.)
Beats
Strike two tuning forks of nearly the same frequency — say $256\ \text{Hz}$ and $260\ \text{Hz}$ — together. You do not hear two notes; you hear one note, of about $258\ \text{Hz}$, whose loudness swells and fades four times a second: wah–wah–wah–wah. This waxing and waning of loudness is called beats. It is superposition again, but now in time at one place, between two waves of slightly different frequencies.
At the listener's position let the two waves give $y_1=a\cos2\pi\nu_1t$ and $y_2=a\cos2\pi\nu_2t$, with $\nu_1\gt\nu_2$. Using $\cos A+\cos B=2\cos\dfrac{A-B}{2}\cos\dfrac{A+B}{2}$,
$$y=\underbrace{2a\cos\left(2\pi\,\frac{\nu_1-\nu_2}{2}\,t\right)}_{\text{slowly varying amplitude}}\ \cos\left(2\pi\,\frac{\nu_1+\nu_2}{2}\,t\right).$$The ear hears a tone of the average frequency $\dfrac{\nu_1+\nu_2}{2}$ whose amplitude $\left|2a\cos\pi(\nu_1-\nu_2)t\right|$ rises and falls slowly. The amplitude is greatest ($2a$) whenever $\cos\pi(\nu_1-\nu_2)t=\pm1$, i.e. at $t=0,\ \dfrac{1}{\nu_1-\nu_2},\ \dfrac{2}{\nu_1-\nu_2},\dots$ — the two vibrations are back in step — and zero half-way between, when they are in opposite phase.
Beats are the periodic rise and fall in the loudness of sound heard when two sound waves of slightly different frequencies (and similar amplitudes) superpose at a point. One beat is one cycle from loud to faint and back to loud.
The ear can count beats only when $|\nu_1-\nu_2|$ is small — up to about $10$ per second; for larger differences the two notes are heard separately (or as a rough sound). If the amplitudes are unequal, the loudness varies between $(a_1+a_2)^2$ and $(a_1-a_2)^2$ but never falls to zero.
Finding an unknown frequency. Beats tell you the size of the difference, not its sign: a fork giving $4$ beats/s with a $256\ \text{Hz}$ fork is at $252$ or $260\ \text{Hz}$. To decide, change the unknown fork slightly and watch the beats. Loading a prong with a little wax lowers its frequency; filing a prong (removing metal from its end) raises it. If loading the unknown fork increases the beats, it moves away from $256$: so it was already below, at $252\ \text{Hz}$. If loading decreases the beats, it was above. For strings, tightening raises the frequency. Musicians use exactly this to tune: they adjust until the beats slow down and vanish.
In Interactive 2 set $\nu_1=25\ \text{Hz}$, $\nu_2=22\ \text{Hz}$ and equal amplitudes ($a_2/a_1=1.0$). How often does the loudness reach a maximum?
The Doppler effect is not in the JEE Main 2026 syllabus list (it is listed for JEE Advanced 2026, and it is not in the CBSE syllabus). This box is for interest only; nothing here is used in the exercises, the Exam corner or the quiz.
When a source of sound and a listener move towards each other, the listener hears a higher frequency than the source emits; when they move apart, a lower one — the rise and fall in pitch of a passing ambulance siren. For motion along the line joining them, in still air with speed of sound $v$, a source of frequency $\nu$ moving at $v_s$ and a listener moving at $v_o$ give $\nu'=\nu\,\dfrac{v+v_o}{v-v_s}$, with $v_o$ positive when the listener moves towards the source and $v_s$ positive when the source moves towards the listener. A $700\ \text{Hz}$ siren approaching at $20\ \text{m/s}$ ($v=340\ \text{m/s}$) is heard at $744\ \text{Hz}$, and at $661\ \text{Hz}$ once it has passed. Sound reflected from a moving object and mixed with the original gives beats at the frequency shift — the principle of Doppler radar and of Doppler ultrasound scans of blood flow.
1. Closed pipes have only odd harmonics. Their natural frequencies are $\nu_1,3\nu_1,5\nu_1,\dots$; the first overtone is the third harmonic, and two consecutive frequencies differ by $2\nu_1$. Strings and open pipes have all harmonics, differing by $\nu_1$.
2. Node/antinode spacing. Node to node $=\lambda/2$, node to antinode $=\lambda/4$. In a pipe, displacement nodes are pressure antinodes — read which one the question asks for.
3. End correction. When a diameter is given, the effective length is $L+0.3d$ (closed) or $L+0.6d$ (open). In the resonance tube, $\lambda=2(l_2-l_1)$ is free of end correction, while $4l_1$ is not.
4. Beats: the sign of the difference. Beats give only $|\nu_1-\nu_2|$. Wax lowers a fork's frequency, filing raises it; tighter strings go up. Decide the sign from whether the beats increase or decrease.
5. Adding amplitudes, not intensities. Two waves combine by $A^2=a_1^2+a_2^2+2a_1a_2\cos\phi$; intensities add simply only when $\cos\phi=0$. $I_\max/I_\min=\left(\dfrac{a_1+a_2}{a_1-a_2}\right)^2$ — square the amplitude ratio, and if you are given intensities, take square roots first.
A tuning fork of unknown frequency gives $5$ beats per second with a fork of $300\ \text{Hz}$. When the unknown fork is filed slightly, the beats fall to $3$ per second. The unknown frequency was
Exercises
Take the speed of sound in air as $340\ \text{m/s}$ and neglect end corrections unless told otherwise.
- 1 Two waves of the same frequency with amplitudes $5.0\ \text{mm}$ and $12\ \text{mm}$ travel together with a phase difference of $\pi/2$. Find the resultant amplitude.
- 2 For the two waves of part 1, find the largest and smallest possible resultant amplitudes and the ratio $I_\max/I_\min$.
- 3 Two identical waves of amplitude $a$ superpose and the resultant also has amplitude $a$. Find their phase difference in degrees.
- 4 Two waves of the same frequency have intensities in the ratio $9:4$. Find the ratio of the greatest to the least intensity they can produce together.
- 5 Two loudspeakers in phase emit $1000\ \text{Hz}$ sound. A listener is $0.85\ \text{m}$ further from one than from the other. Is the sound loud or quiet there? (Take $\lambda=0.34\ \text{m}$.)
- 6 Describe the reflected pulse when a crest reaches (a) a string's end tied to a wall; (b) an end tied to a light ring that slides freely on a smooth vertical rod.
- 7 The wave $y_i=3.0\sin(4\pi x+100\pi t)$ (cm, with $x$ in m, $t$ in s) is reflected without loss at $x=0$. Write the reflected wave if $x=0$ is (a) a rigid support, (b) a free end.
- 8 A light string is joined to a heavy string. A pulse travels from the light string towards the joint. Which of the reflected and transmitted pulses is inverted? Which travels faster?
- 1 Find the wavelength and the distance between adjacent nodes.
- 2 Find the amplitude and the speed of the two travelling waves that make up this standing wave.
- 3 Find the amplitude of the particle at $x=1.0\ \text{cm}$.
- 4 A string $1.2\ \text{m}$ long with linear mass density $6.0\ \text{g/m}$ is fixed at both ends under a tension of $96\ \text{N}$. Find its fundamental frequency.
- 5 For the string of part 4, find the frequency of the third harmonic and the number of nodes (including the ends) in that mode.
- 6 A string fixed at both ends has two consecutive natural frequencies $375\ \text{Hz}$ and $450\ \text{Hz}$. Find its fundamental frequency and the harmonic numbers of the two given frequencies.
- 7 A sonometer wire $50\ \text{cm}$ long resonates in its fundamental with a $256\ \text{Hz}$ fork. At what length (same tension) will it resonate with a $384\ \text{Hz}$ fork?
- 8 By what percentage must the tension in a string be increased to raise its fundamental frequency by $10\%$?
- 9 A sonometer wire is stretched by a metal block hanging from it, and its fundamental is $300\ \text{Hz}$. The block (density $9.0\times10^3\ \text{kg/m}^3$) is then completely immersed in water. Find the new fundamental frequency.
- 1 An open pipe has a fundamental of $425\ \text{Hz}$. Find its length in cm.
- 2 Find the fundamental and the first two overtones of a pipe $25\ \text{cm}$ long closed at one end.
- 3 A closed pipe has a fundamental of $170\ \text{Hz}$. Find its length and the frequency of its second overtone.
- 4 An open pipe and a closed pipe have the same fundamental frequency. Find the ratio of their lengths, $L_\text{open}/L_\text{closed}$.
- 5 A pipe resonates at $375$, $625$ and $875\ \text{Hz}$, and at no frequency in between. Is it open or closed? Find its fundamental and its length in cm.
- 6 A pipe $32\ \text{cm}$ long and $5.0\ \text{cm}$ in diameter is closed at one end. Using the end correction $0.3d$, find its fundamental frequency.
- 7 In a resonance tube experiment with a $480\ \text{Hz}$ fork the first two resonances occur at $17.0\ \text{cm}$ and $52.5\ \text{cm}$. Find the speed of sound and the end correction.
- 8 In the fundamental mode of a closed pipe, where is the pressure variation greatest and where is it zero? Explain.
- 1 Forks of $384\ \text{Hz}$ and $380\ \text{Hz}$ are sounded together. Find the beat frequency and the time between successive maxima of loudness.
- 2 A fork P gives $6$ beats per second with a $400\ \text{Hz}$ fork. When P is loaded with a little wax the beats fall to $4$ per second. Find the frequency of P before loading.
- 3 A tuning fork gives $5$ beats per second with a sonometer wire when the vibrating length is $95\ \text{cm}$, and again $5$ beats per second when it is $100\ \text{cm}$ (tension unchanged, fundamental mode). Find the frequency of the fork.
- 4 Two open pipes, $50\ \text{cm}$ and $51\ \text{cm}$ long, sound their fundamentals together. Find the beat frequency.
- 5 Two identical strings are both tuned to $300\ \text{Hz}$. The tension in one is increased by $2\%$. How many beats per second are heard when both sound their fundamentals?
- 6 A string $1.5\ \text{m}$ long, fixed at both ends, vibrates in four loops at $120\ \text{Hz}$. Find the speed of waves on it.
- 7 Why can we not hear beats between a $256\ \text{Hz}$ fork and a $300\ \text{Hz}$ fork?
- 8 A wire $1.0\ \text{m}$ long with linear mass density $1.0\ \text{g/m}$, vibrating in its fundamental mode, is in unison with the fundamental of a $25\ \text{cm}$ pipe closed at one end. Find the tension in the wire.
E1. JEE Main · MCQ The waves $y_1=3\sin(\omega t-kx)$ and $y_2=4\cos(\omega t-kx)$ (in cm) travel together along a string. The amplitude of the resultant wave is (A) $7\ \text{cm}$ (B) $1\ \text{cm}$ (C) $5\ \text{cm}$ (D) $\sqrt7\ \text{cm}$
E2. JEE Main · Numerical A string $75\ \text{cm}$ long is fixed at both ends. Two of its consecutive natural frequencies are $420\ \text{Hz}$ and $490\ \text{Hz}$. Find the speed of transverse waves on the string in m/s. Give the answer to the nearest integer.
E3. JEE Main · MCQ The first overtone of an open organ pipe has the same frequency as the first overtone of a pipe $30\ \text{cm}$ long closed at one end. Neglecting end corrections, the length of the open pipe is (A) $20\ \text{cm}$ (B) $60\ \text{cm}$ (C) $80\ \text{cm}$ (D) $40\ \text{cm}$
E4. JEE Main · Numerical In a resonance-tube experiment with a $500\ \text{Hz}$ tuning fork, the first resonance occurs at an air-column length of $16.5\ \text{cm}$ and the second at $50.5\ \text{cm}$. Find the speed of sound in air in m/s. Give the answer to the nearest integer.
E5. JEE Main · Numerical A tuning fork of unknown frequency produces $3$ beats per second with a standard fork of $250\ \text{Hz}$. When the unknown fork is loaded with a small amount of wax, it produces $5$ beats per second with the same standard fork. Find the unknown frequency (before loading) in Hz. Give the answer to the nearest integer.
E6. JEE Main · MCQ A standing wave on a string is $y=4\sin\left(\dfrac{\pi x}{15}\right)\cos(96\pi t)$, with $x$ and $y$ in cm and $t$ in s. The distance between a node and the nearest antinode is (A) $7.5\ \text{cm}$ (B) $15\ \text{cm}$ (C) $30\ \text{cm}$ (D) $3.75\ \text{cm}$
Research question. Is the end correction of an open pipe really about $0.3$ times its diameter, and does it matter for the notes a pipe plays?
Why it matters. Organ builders, flute and bansuri makers and the designers of bass-reflex loudspeaker ports all tune air columns. A pipe sounds flat compared with $v/4L$ because the vibrating air extends beyond its end, and in a short, wide pipe the error is large. The same end correction limits the accuracy of the resonance-tube measurement of the speed of sound — one of the JEE Main experiments.
What to do.
- Collect three or four plastic pipes of different internal diameters ($1$–$5\ \text{cm}$), each about $50\ \text{cm}$ long, and a tall bucket or measuring cylinder of water.
- Use a phone tone-generator app at a fixed frequency (say $500\ \text{Hz}$) held just above the pipe. Lower the pipe into the water until the sound is loudest (first resonance), and measure the air column $l_1$; raise it to find the second resonance $l_2$.
- For each pipe find $\lambda=2(l_2-l_1)$, $v=\nu\lambda$ and $e=\tfrac12(l_2-3l_1)$. Measure the air temperature and compare $v$ with $332\sqrt{T/273}\ \text{m/s}$.
- Plot $e$ against the diameter $d$. Is it a straight line through the origin, and what is its slope?
- Repeat one pipe at two other frequencies to see whether $e$ depends on frequency.
Tools: Plastic pipes, vernier callipers or a ruler for the diameters, metre scale, bucket of water, smartphone with tone-generator (and a sound-level meter app, if available, to find the loudest point).
Hand in: A table of $d$, $l_1$, $l_2$, $\lambda$, $v$ and $e$ for every pipe; the graph of $e$ against $d$ with its slope; a paragraph comparing your slope with $0.3$ and explaining why using $l_2-l_1$ gives a better $v$ than $4l_1$.
Going further. Theory for a pipe with a wide flange at its mouth gives a larger correction (about $0.82r$) than for an unflanged pipe ($0.61r$). Fit a cardboard collar round the top of one pipe and see whether $e$ increases.
🧪 Self-check quiz
Q1. In a standing wave of wavelength $\lambda$, the distance between two adjacent nodes is
Q2. A pipe closed at one end has a fundamental frequency of $200\ \text{Hz}$. Which of these is one of its natural frequencies?
Q3. Two sources of frequencies $512\ \text{Hz}$ and $508\ \text{Hz}$ sound together. The number of beats heard per second is
Q4. When a wave on a string is reflected from a rigid support, the reflected wave
Q5. Which statement about a standing wave on a string is correct?