1.2 Dimensions and Dimensional Analysis
Every physical quantity is a product of powers of the base quantities. Both sides of a correct equation must have the same dimensions — a single rule that catches errors, finds the dimensions of unknown constants, predicts formulas and converts units between systems.
In 1950 the British physicist G. I. Taylor published an estimate of the energy released by the first nuclear explosion, a figure that was still secret. His data were a series of photographs, with a time scale, of the growing fireball. His method was almost entirely dimensional: the radius $R$ of the blast could depend only on the energy $E$, the time $t$ and the density $\rho$ of the air, and the only way to combine these into a length is $R\propto(Et^2/\rho)^{1/5}$. Reading $R$ and $t$ from the photographs gave $E$ — about 17 kilotons of TNT, remarkably close to the classified value of about 20 kilotons.
The idea behind that calculation is simple. Every quantity in mechanics is built from mass, length and time, and an equation can only be true if both sides are built in the same way. This section develops that idea: the dimensions of a quantity, the principle of homogeneity, and its four uses in JEE Main — checking equations, finding the dimensions of constants, deducing how one quantity depends on others, and converting units between systems. We use the base units and the rules of significant figures from Section 1.1.
Dimensions of a physical quantity
Speed is a length divided by a time; force is a mass times a length divided by a time squared. Whatever units are used — metres or feet, seconds or hours — this structure stays the same. The dimensions of a quantity record exactly this structure.
The dimensions of a physical quantity are the powers to which the base quantities must be raised to represent it. The base quantities are written as symbols in square brackets: mass $[\text{M}]$, length $[\text{L}]$, time $[\text{T}]$, electric current $[\text{A}]$, temperature $[\text{K}]$, amount of substance $[\text{mol}]$ (and luminous intensity $[\text{cd}]$).
The expression $[\text{M}^a\text{L}^b\text{T}^c\ldots]$ is the dimensional formula of the quantity, and an equation such as $[F]=[\text{M}\text{L}\text{T}^{-2}]$ — "the dimensions of force are …" — is its dimensional equation. Square brackets around a symbol mean "the dimensions of".
To find a dimensional formula, start from any equation that defines the quantity and replace every quantity by its dimensions. Dimensions multiply and divide like algebraic symbols: $[AB]=[A][B]$, $[A/B]=[A]/[B]$, $[A^n]=[A]^n$. Pure numbers ($2$, $\tfrac12$, $\pi$) have no dimensions. For example,
$$[v]=\frac{[\text{L}]}{[\text{T}]}=[\text{L}\text{T}^{-1}],\quad [a]=[\text{L}\text{T}^{-2}],\quad [F]=[m][a]=[\text{M}\text{L}\text{T}^{-2}],\quad [W]=[F][s]=[\text{M}\text{L}^2\text{T}^{-2}].$$The same rule works for derivatives and integrals, which you will meet from Chapter 2 on: $\left[\dfrac{dy}{dx}\right]=\dfrac{[y]}{[x]}$ and $\left[\displaystyle\int y\,dx\right]=[y][x]$. The table collects the dimensional formulas you will need throughout the course; the electrical quantities are defined properly in their own chapters, but JEE Main asks about their dimensions from the start.
| Quantity | Defining relation | SI unit | Dimensions |
|---|---|---|---|
| velocity, speed | $v=s/t$ | $\text{m/s}$ | $[\text{L}\text{T}^{-1}]$ |
| acceleration, $g$ | $a=\Delta v/t$ | $\text{m/s}^2$ | $[\text{L}\text{T}^{-2}]$ |
| force, weight | $F=ma$ | N | $[\text{M}\text{L}\text{T}^{-2}]$ |
| momentum, impulse | $p=mv$, $J=F\Delta t$ | $\text{kg m/s}=\text{N s}$ | $[\text{M}\text{L}\text{T}^{-1}]$ |
| work, energy, heat, torque | $W=Fs$, $\tau=rF$ | J (torque: N m) | $[\text{M}\text{L}^2\text{T}^{-2}]$ |
| power | $P=W/t$ | W | $[\text{M}\text{L}^2\text{T}^{-3}]$ |
| pressure, stress, elastic moduli, energy density | $p=F/A$ | Pa | $[\text{M}\text{L}^{-1}\text{T}^{-2}]$ |
| density | $\rho=m/V$ | $\text{kg/m}^3$ | $[\text{M}\text{L}^{-3}]$ |
| frequency, angular velocity | $\nu=1/T$, $\omega=\theta/t$ | Hz, rad/s | $[\text{T}^{-1}]$ |
| angular momentum, Planck constant | $L=mvr$, $E=h\nu$ | J s | $[\text{M}\text{L}^2\text{T}^{-1}]$ |
| moment of inertia | $I=mr^2$ | $\text{kg m}^2$ | $[\text{M}\text{L}^2]$ |
| gravitational constant | $F=Gm_1m_2/r^2$ | $\text{N m}^2\text{kg}^{-2}$ | $[\text{M}^{-1}\text{L}^3\text{T}^{-2}]$ |
| spring constant, surface tension | $F=kx$, $S=F/l$ | N/m | $[\text{M}\text{T}^{-2}]$ |
| coefficient of viscosity | $F=\eta A\,\dfrac{dv}{dx}$ | Pa s | $[\text{M}\text{L}^{-1}\text{T}^{-1}]$ |
| specific heat capacity | $Q=mc\Delta T$ | $\text{J kg}^{-1}\text{K}^{-1}$ | $[\text{L}^2\text{T}^{-2}\text{K}^{-1}]$ |
| latent heat | $Q=mL$ | J/kg | $[\text{L}^2\text{T}^{-2}]$ |
| gas constant | $pV=nRT$ | $\text{J mol}^{-1}\text{K}^{-1}$ | $[\text{M}\text{L}^2\text{T}^{-2}\text{K}^{-1}\text{mol}^{-1}]$ |
| Boltzmann constant | $E\sim k_BT$ | J/K | $[\text{M}\text{L}^2\text{T}^{-2}\text{K}^{-1}]$ |
| thermal conductivity | $\dfrac{Q}{t}=kA\dfrac{\Delta T}{l}$ | $\text{W m}^{-1}\text{K}^{-1}$ | $[\text{M}\text{L}\text{T}^{-3}\text{K}^{-1}]$ |
| Stefan constant | $P=\sigma AT^4$ | $\text{W m}^{-2}\text{K}^{-4}$ | $[\text{M}\text{T}^{-3}\text{K}^{-4}]$ |
| electric charge | $q=It$ | C | $[\text{A}\text{T}]$ |
| potential difference, emf | $V=W/q$ | V | $[\text{M}\text{L}^2\text{T}^{-3}\text{A}^{-1}]$ |
| resistance | $R=V/I$ | Ω | $[\text{M}\text{L}^2\text{T}^{-3}\text{A}^{-2}]$ |
| capacitance | $C=q/V$ | F | $[\text{M}^{-1}\text{L}^{-2}\text{T}^4\text{A}^2]$ |
| permittivity $\varepsilon_0$ | $F=\dfrac{q_1q_2}{4\pi\varepsilon_0r^2}$ | $\text{C}^2\text{N}^{-1}\text{m}^{-2}$ | $[\text{M}^{-1}\text{L}^{-3}\text{T}^4\text{A}^2]$ |
| electric field | $E=F/q$ | N/C = V/m | $[\text{M}\text{L}\text{T}^{-3}\text{A}^{-1}]$ |
| magnetic field | $F=qvB$ | T | $[\text{M}\text{T}^{-2}\text{A}^{-1}]$ |
| magnetic flux | $\Phi=BA$ | Wb | $[\text{M}\text{L}^2\text{T}^{-2}\text{A}^{-1}]$ |
| inductance | $\varepsilon=L\,\dfrac{dI}{dt}$ | H | $[\text{M}\text{L}^2\text{T}^{-2}\text{A}^{-2}]$ |
| permeability $\mu_0$ | $B=\dfrac{\mu_0I}{2\pi r}$ | $\text{N/A}^2$ | $[\text{M}\text{L}\text{T}^{-2}\text{A}^{-2}]$ |
A quantity whose dimensional formula is $[\text{M}^0\text{L}^0\text{T}^0]$ is dimensionless. Quantities fall into four groups:
- dimensional variables — velocity, force, energy …;
- dimensional constants — $G$, $h$, $c$, $k_B$, $R$: fixed numbers that nonetheless have dimensions;
- dimensionless variables — angle, strain, refractive index, relative density, coefficient of friction;
- dimensionless constants — pure numbers such as $2$, $\pi$, $e$.
Having a unit is not the same as having dimensions: the angle $\theta=s/r$ has the unit radian but is dimensionless.
Which of these quantities has the dimensions $[\text{M}\text{L}^2\text{T}^{-2}]$?
The principle of homogeneity
You cannot add $3\ \text{kg}$ to $5\ \text{m}$; the sum has no meaning. Every term of a physical equation must therefore be the same kind of quantity, whatever units are used.
In any physically correct equation, every term on both sides has the same dimensions. Consequently:
- only quantities with the same dimensions can be added, subtracted or equated;
- the argument of $\sin$, $\cos$, $\tan$, $e^x$ and $\log$ must be dimensionless, and the value of such a function is dimensionless;
- an equation that fails the test is certainly wrong; an equation that passes it may still be wrong by a dimensionless factor ($2$, $\tfrac12$, $\pi$) or a dimensionless function.
Some combinations appear so often in JEE Main that it pays to know their dimensions at a glance.
Speeds: $\dfrac{1}{\sqrt{\mu_0\varepsilon_0}}$, $\ \dfrac{E}{B}$, $\ \sqrt{\dfrac{GM}{R}}$, $\ \sqrt{\dfrac{T}{\mu}}$ ($T$ tension, $\mu$ mass per unit length) all have dimensions $[\text{L}\text{T}^{-1}]$.
Times: $RC$, $\ \dfrac{L}{R}$, $\ \sqrt{LC}$, $\ \sqrt{\dfrac{l}{g}}$, $\ \sqrt{\dfrac{m}{k}}$ all have dimensions $[\text{T}]$.
Energies: $h\nu$, $\ k_BT$, $\ qV$, $\ \tfrac12CV^2$, $\ \tfrac12LI^2$, $\ pV$ all have dimensions $[\text{M}\text{L}^2\text{T}^{-2}]$.
Energy per unit volume (= pressure): $\tfrac12\varepsilon_0E^2$ and $\dfrac{B^2}{2\mu_0}$ have dimensions $[\text{M}\text{L}^{-1}\text{T}^{-2}]$.
A speed varies with time as $v=at+\dfrac{b}{t+c}$. The dimensions of $c$ are
Deducing relations: the method of dimensions
If we know which quantities a result depends on, homogeneity can often tell us how it depends on them — before any detailed theory.
- List the quantities $x,y,z$ on which the unknown $Q$ can depend (from physical reasoning).
- Assume a product of powers: $Q=k\,x^ay^bz^c$, with $k$ a dimensionless constant.
- Substitute dimensional formulas and equate the powers of M, L and T on the two sides: three linear equations.
- Solve for $a,b,c$ and write the relation. The constant $k$ must come from experiment or a full theory.
With M, L and T alone, the method fixes at most three exponents.
The escape speed is to be written as $v=k\,G^aM^bR^c$. Take $a=b=\tfrac12$. Which power $c$ of the radius makes the formula balance?
The method of dimensions gives the speed of a wave on a string as $v=k\sqrt{T/\mu}$. If the tension $T$ is made four times as large (same string), the speed
Converting units between systems; limits of the method
A quantity is the same whatever units are used: $n_1u_1=n_2u_2$ (Section 1.1). If the quantity has dimensions $[\text{M}^a\text{L}^b\text{T}^c]$, its unit is $u=[\text{M}]^a[\text{L}]^b[\text{T}]^c$ built from the units of mass, length and time of the system, and the conversion follows at once.
Let a quantity with dimensions $[\text{M}^a\text{L}^b\text{T}^c]$ have numerical value $n_1$ in a system whose units of mass, length and time are $M_1$, $L_1$, $T_1$. In a second system with units $M_2$, $L_2$, $T_2$, its numerical value is
$$n_2=n_1\left(\frac{M_1}{M_2}\right)^{a}\left(\frac{L_1}{L_2}\right)^{b}\left(\frac{T_1}{T_2}\right)^{c}.$$Each ratio is a pure number (both units expressed in the same unit). The same pattern extends to current and temperature.
Express a pressure of $1\ \text{Pa}$ in a system whose units are the tonne, the kilometre and the hour. Roughly what is the new numerical value?
1. No numbers. It cannot find dimensionless constants: the $2\pi$ in $T=2\pi\sqrt{l/g}$, the $\tfrac12$ in $\tfrac12mv^2$, the $6\pi$ in Stokes' law.
2. No sums. It cannot derive a relation with several terms, such as $s=ut+\tfrac12at^2$; it can only check one.
3. No special functions. It cannot produce trigonometric, exponential or logarithmic dependences ($x=A\sin\omega t$, $N=N_0e^{-\lambda t}$).
4. Too many variables. With M, L, T it fixes at most three exponents; if $Q$ depends on four or more mechanical quantities, the method alone is not enough.
5. Same dimensions, different quantities. Work and torque, or stress and pressure, share dimensions; the method cannot tell them apart, nor say whether a quantity is a scalar or a vector.
1. Inverting the conversion. $n_2=n_1(M_1/M_2)^a\cdots$ — old unit over new unit. A larger new unit gives a smaller number; if your answer goes the other way, the ratio is upside down.
2. Forgetting negative powers. Time usually appears as $\text{T}^{-1}$, $\text{T}^{-2}$, $\text{T}^{-3}$. Changing seconds to minutes multiplies the value of an acceleration by $3600$.
3. Arguments of functions. In $y=A\sin(kx-\omega t)$ the bracket is dimensionless, so $[k]=[\text{L}^{-1}]$ and $[\omega]=[\text{T}^{-1}]$; in $e^{-t/\tau}$, $[\tau]=[\text{T}]$.
4. "Dimensionless" versus "unitless". Angle, strain and refractive index are dimensionless; angle still has a unit (rad). Planck's constant and angular momentum share dimensions, so do torque and energy — a frequent MCQ.
5. Electrical dimensions. Build them from $q=It$ and $V=W/q$, not from memory; for $\varepsilon_0$ and $\mu_0$ use $\varepsilon_0\mu_0=1/c^2$ as a check.
Which of these relations could the method of dimensions derive completely, apart from a dimensionless constant?
Exercises
Write dimensions in the form $[\text{M}^a\text{L}^b\text{T}^c\ldots]$. Quantities are in SI unless stated.
- 1 Find the dimensions of (a) impulse, (b) power, (c) pressure, (d) surface tension.
- 2 Find the dimensions of the spring constant $k$ (from $F=-kx$) and of $k/m$. Which quantity has the dimensions of $k/m$?
- 3 Find the dimensions of latent heat and of specific heat capacity.
- 4 Find the dimensions of the gas constant $R$ in $pV=nRT$.
- 5 The power radiated by a hot body is $P=\sigma AT^4$. Find the dimensions of $\sigma$.
- 6 Find the dimensions of electric field ($E=F/q$) and of electric potential ($V=W/q$).
- 7 Show that $E/B$ has the dimensions of a speed ($F=qvB$ defines $B$).
- 8 Show that the product $RC$ of a resistance and a capacitance has the dimensions of time.
- 9 Which pairs have the same dimensions? (a) work and torque (b) angular momentum and Planck constant (c) stress and Young's modulus (d) impulse and force.
- 1 Check $v=u+at$.
- 2 Check $s=ut+\tfrac12at^2$.
- 3 A student writes the kinetic energy as $K=\tfrac12mv^3$. Show that it is wrong.
- 4 Check the speed of a transverse wave on a string, $v=\sqrt{T/\mu}$, where $T$ is the tension and $\mu$ the mass per unit length.
- 5 A mass $m$ on a spring of constant $k$ oscillates with period $T=2\pi\sqrt{m/k}$. Check this, and show that $T=2\pi\sqrt{k/m}$ is impossible.
- 6 Check that the bracket in $y=A\sin\left[2\pi\left(\dfrac{t}{T}-\dfrac{x}{\lambda}\right)\right]$ is dimensionless ($T$ period, $\lambda$ wavelength).
- 7 A student writes the escape speed as $v=\sqrt{2GMR}$. Show that it is wrong and suggest a dimensionally correct form.
- 8 The speed of sound in a gas is $v=\sqrt{\gamma p/\rho}$, with $\gamma$ a ratio of two heat capacities. Check it, and give an example of an equation that is dimensionally correct but physically wrong.
- 1 $x=a+bt+ct^2$, with $x$ in metres and $t$ in seconds. Find the dimensions of $a$, $b$, $c$.
- 2 A speed varies as $v=\dfrac{\alpha}{t}+\beta t^2$. Find the dimensions of $\alpha$ and $\beta$.
- 3 A force depends on a distance $x$ as $F=ax+bx^2$. Find the dimensions of $a$ and $b$.
- 4 A pressure is given by $P=\dfrac{a-t^2}{bx}$, with $t$ a time and $x$ a distance. Find the dimensions of $a$ and $b$.
- 5 In $y=A\sin(\omega t-kx)$, find the dimensions of $\omega$, $k$ and $\omega/k$.
- 6 The energy of two molecules a distance $r$ apart is $U=\dfrac{A}{r^{12}}-\dfrac{B}{r^6}$. Find the dimensions of $A$, $B$ and $A/B$.
- 7 The drag force on a car is $F=\tfrac12C_D\rho Av^2$, with $\rho$ the air density and $A$ the frontal area. Show that $C_D$ is dimensionless.
- 8 In diffusion, the number of particles crossing unit area per unit time is $J=-D\,\dfrac{n_2-n_1}{x_2-x_1}$, where $n$ is a number of particles per unit volume. Find the dimensions of $D$.
- 1 The period $T$ of a simple pendulum may depend on the mass $m$ of the bob, the length $l$ and $g$. Find the form of the relation. Does the mass matter?
- 2 The speed $v$ of a wave on a string depends on the tension $T$ and the mass per unit length $\mu$. Find the form of the relation.
- 3 The drag force $F$ on a small sphere moving slowly through a fluid depends on the viscosity $\eta$, the radius $r$ and the speed $v$. Find the relation.
- 4 (Modelling) Reproduce Taylor's result: the radius $R$ of a blast wave depends on the energy $E$, the time $t$ and the air density $\rho$.
- 5 The force $F$ needed to keep a mass $m$ moving at speed $v$ on a circle of radius $r$ depends on $m$, $v$ and $r$. Find the form of $F$.
- 6 Combine $h$, $G$ and $c$ into a length (the Planck length) and evaluate it. ($h=6.63\times10^{-34}\ \text{J s}$, $G=6.67\times10^{-11}\ \text{N m}^2\text{kg}^{-2}$, $c=3.00\times10^8\ \text{m/s}$.)
- 7 Convert $1\ \text{N}$ to dynes and $1\ \text{Pa}$ to $\text{dyn/cm}^2$.
- 8 Find the numerical value of $g=9.8\ \text{m/s}^2$ in a system whose unit of length is $1\ \text{km}$ and unit of time $1\ \text{min}$.
- 9 In a new system the unit of force is $100\ \text{N}$, the unit of length $10\ \text{m}$ and the unit of time $100\ \text{s}$. What is the unit of mass, in kg?
- 10 The viscosity of water is about $1.0\times10^{-3}\ \text{Pa s}$. Express it in poise (the CGS unit, $\text{g cm}^{-1}\text{s}^{-1}$).
E1. JEE Main · MCQ If $\varepsilon_0$ is the permittivity of free space and $E$ an electric field, the quantity $\tfrac12\varepsilon_0E^2$ has the same dimensions as (A) force (B) energy (C) pressure (D) power
E2. JEE Main · Numerical The speed $v$ of short ripples on a water surface depends on the wavelength $\lambda$, the surface tension $S$ and the density $\rho$ of water as $v\propto\lambda^aS^b\rho^c$. Find the value of $2(b-a)$. Give the answer to the nearest integer.
E3. JEE Main · MCQ If momentum $[P]$, area $[A]$ and time $[T]$ are taken as fundamental quantities, the dimensional formula of energy is (A) $[PAT^{-1}]$ (B) $[P^2AT]$ (C) $[PA^{-1/2}T]$ (D) $[PA^{1/2}T^{-1}]$
E4. JEE Main · Numerical In a new system of units the unit of mass is $100\ \text{g}$, the unit of length is $10\ \text{cm}$ and the unit of time is $0.5\ \text{s}$. What is the numerical value of a power of $1\ \text{W}$ in this system? Give the answer to the nearest integer.
E5. JEE Main · MCQ The position of a particle moving against air resistance is $x=\dfrac{a}{b}\left(1-e^{-bt}\right)$, where $t$ is time. The dimensions of $a$ and $b$ are respectively (A) $[\text{L}\text{T}^{-1}]$ and $[\text{T}^{-1}]$ (B) $[\text{L}]$ and $[\text{T}]$ (C) $[\text{L}\text{T}^{-2}]$ and $[\text{T}^{-1}]$ (D) $[\text{L}\text{T}]$ and $[\text{T}^{-1}]$
E6. JEE Main · Numerical The Planck time $t_P$ is the only time that can be formed from $h$, $G$ and $c$. If $t_P\propto h^xG^yc^z$, find the value of $2(x+y-z)$. Give the answer to the nearest integer.
Research question. How long does a bottle take to drain through a hole in its base — and how much of the answer can dimensional analysis predict before you do the experiment?
Why it matters. Draining times matter for water tanks and irrigation channels, fuel tanks, industrial hoppers and the gravity drips used in hospitals. Engineers routinely use dimensional analysis to plan such experiments and to scale results from small models to full-size systems, as in wind tunnels and ship-model basins.
What to do.
- Predict. For a given bottle and hole, the drain time $t$ can depend on the initial water height $h$ and on $g$ (the water's density cancels, because gravity drives the flow and the water's mass resists it). Show by dimensions that $t=k\sqrt{h/g}$ for a fixed bottle-to-hole shape, so $t\propto\sqrt h$.
- Build. Make a hole of about $5\ \text{mm}$ in the base of a straight-sided plastic bottle. Mark heights of $5$, $10$, $15$, $20$ and $25\ \text{cm}$ above the hole.
- Measure. Fill to each mark, release, and time how long the water takes to stop flowing; repeat three times and average.
- Test. Plot $\log t$ against $\log h$. Is the slope close to $0.5$? Then repeat with a hole of twice the diameter and compare the times at the same $h$ — this ratio is outside what dimensions alone can tell you.
Tools: Plastic bottles, a heated nail or drill for the holes, a ruler, a phone stopwatch, a sink; a spreadsheet for the log–log plot.
Hand in: Your dimensional prediction, a results table with significant figures matched to your stopwatch and ruler, the log–log graph with its slope, and a paragraph on what the hole-size experiment adds.
Going further. Theory based on Bernoulli's principle (Chapter 7) gives $t=\left(\dfrac{D}{d}\right)^2\sqrt{\dfrac{2h}{g}}$ for a bottle of diameter $D$ and a hole of diameter $d$, times a correction near $1.6$ for the narrowing jet. Compare your hole-size ratio with the predicted factor of $4$.
🧪 Self-check quiz
Q1. Planck's constant has the same dimensions as
Q2. Which of these quantities is dimensionless?
Q3. The quantity $\dfrac{1}{\sqrt{\mu_0\varepsilon_0}}$ has the dimensions of
Q4. The dimensional formula of the coefficient of viscosity is
Q5. The units of length and of time are both doubled. The numerical value of a given acceleration