Chapter 9 · Kinetic Theory of Gases

9.1 The Ideal Gas and Kinetic Theory

A gas is a huge number of tiny molecules flying about and bouncing off the walls. From that picture come the ideal gas equation $pV=nRT$, the pressure $p=\tfrac13\rho\,v_\text{rms}^2$, the meaning of temperature, $\tfrac12m\overline{v^2}=\tfrac32k_BT$, and the three molecular speeds JEE Main asks about.

Pump up a bicycle tyre and it gets warm and hard; leave a sealed bottle of water in a hot car and the cap bulges; a weather balloon released at sea level swells to many times its size before it bursts high in the atmosphere. Each of these is a gas responding to changes in pressure, volume and temperature, and remarkably, almost every gas responds in the same way. Hydrogen, nitrogen, carbon dioxide and air, at ordinary pressures, all obey one simple equation linking $p$, $V$ and $T$.

Why should such different substances behave alike? The answer is the kinetic theory of gases: a gas is a crowd of about $10^{25}$ molecules per cubic metre, flying in all directions at hundreds of metres per second, and the pressure we measure is nothing but the steady drumming of these molecules on the walls. In this section we first collect the gas laws into the equation of state of a perfect gas and find the work needed to compress a gas. Then we set out the assumptions of kinetic theory, derive the pressure from Newton's laws, and discover what temperature really is — the average kinetic energy of the molecules. The section ends with the three "typical" molecular speeds and how they depend on temperature and molar mass.

The equation of state of a perfect gas

A fixed amount of gas has three easily measured properties: its pressure $p$, its volume $V$ and its temperature $T$. Experiments done over two centuries showed how they are linked, one pair at a time, for a gas that is not too dense:

Extrapolating Charles's law or the pressure law to zero volume or zero pressure gives the same temperature for every gas, $-273.15^\circ\text{C}$: this is absolute zero, the zero of the kelvin scale ($T/\text{K}=t/{}^\circ\text{C}+273.15$; JEE Main problems usually round to $273$). The first three laws combine into $pV/T=\text{constant}$ for a fixed amount of gas, and Avogadro's law says the constant is proportional to the number of molecules. To count molecules we use the mole.

📘 Definition 9.1 — Mole and Avogadro's number

One mole of a substance contains exactly $N_A=6.022\times10^{23}$ elementary entities (molecules, for a gas); $N_A$ is Avogadro's number (Avogadro constant, unit $\text{mol}^{-1}$). A sample of $N$ molecules, of mass $m_\text{tot}$, of a gas with molar mass $M$ (mass of one mole) contains

$$n=\frac{N}{N_A}=\frac{m_\text{tot}}{M}\ \text{moles}.$$

The mass of one molecule is $m=M/N_A$. Careful with units: $M$ for oxygen is $32\ \text{g/mol}=0.032\ \text{kg/mol}$.

📘 Definition 9.2 — Ideal (perfect) gas

An ideal gas (or perfect gas) is a gas that obeys the equation $pV=nRT$ exactly, at every pressure and temperature. Real gases behave like an ideal gas when the pressure is low and the temperature is high (well above the temperature at which they liquefy), because the molecules are then far apart compared with their size and the forces between them hardly matter.

📐 Law 9.1 — Equation of state of an ideal gas

For $n$ moles ($N$ molecules) of an ideal gas at absolute pressure $p$, volume $V$ and absolute temperature $T$,

$$pV=nRT=Nk_BT,$$

where $R=8.31\ \text{J mol}^{-1}\text{K}^{-1}$ is the universal gas constant (the same for every gas) and $k_B=R/N_A=1.38\times10^{-23}\ \text{J/K}$ is the Boltzmann constant — the gas constant per molecule. Useful equivalent forms:

$$p=\frac{\rho RT}{M},\qquad p=n_vk_BT,$$ $$\frac{p_1V_1}{T_1}=\frac{p_2V_2}{T_2}\ \ (\text{fixed amount}),$$

where $\rho$ is the density and $n_v=N/V$ the number of molecules per unit volume. $T$ must be in kelvin and $p$ is the absolute pressure (not the gauge pressure).

One mole of any ideal gas at STP ($273\ \text{K}$, $1\ \text{atm}=1.013\times10^5\ \text{Pa}$) occupies $V=RT/p=(8.31\times273)/(1.013\times10^5)$, that is $V=0.0224\ \text{m}^3=22.4\ \text{L}$ — the molar volume. And at STP every cubic metre of gas holds $n_v=p/k_BT=2.69\times10^{25}$ molecules, whatever the gas.

Real gases do not obey $pV=nRT$ exactly. If you plot $pV/nRT$ against $p$ at a fixed temperature, an ideal gas gives a horizontal line at $1$; real gases curve away from it at high pressure (where the volume of the molecules themselves and the attraction between them matter), and all of them approach $1$ as $p\to0$. That is why the ideal gas is the low-pressure limit of every real gas.

✏️ Example 1 — How much oxygen is in the cylinder?
A hospital oxygen cylinder of internal volume $20\ \text{L}$ holds oxygen ($M=32\ \text{g/mol}$) at $27^\circ\text{C}$ and an absolute pressure of $15\ \text{atm}$. Treating oxygen as an ideal gas, find (a) the number of moles, (b) the mass of oxygen, (c) the number of molecules in the cylinder.
SI units $p=15\times1.013\times10^5=1.52\times10^6\ \text{Pa}$, $V=20\ \text{L}=0.020\ \text{m}^3$, $T=27+273=300\ \text{K}$.
(a) $n=\dfrac{pV}{RT}=\dfrac{1.52\times10^6\times0.020}{8.31\times300}=\dfrac{3.04\times10^4}{2493}=12.2\ \text{mol}$.
(b), (c) $m_\text{tot}=nM=12.2\times0.032=0.39\ \text{kg}$; $\ N=nN_A=12.2\times6.02\times10^{23}=7.3\times10^{24}$ molecules.
Check At STP $12.2\ \text{mol}$ would fill $12.2\times22.4=273\ \text{L}$; squeezing it into $20\ \text{L}$ needs about $273/20\times\tfrac{300}{273}=15\ \text{atm}$ ✓.
✏️ Example 2 — Two connected flasks, one heated
Two flasks of volumes $1.0\ \text{L}$ and $2.0\ \text{L}$ are joined by a thin tube of negligible volume. They contain air at $1.0\ \text{atm}$ and $300\ \text{K}$. The $2.0\ \text{L}$ flask is now placed in an oven at $400\ \text{K}$ while the $1.0\ \text{L}$ flask is kept at $300\ \text{K}$. (a) Find the new pressure. (b) What fraction of all the air has moved from the hot flask into the cold one?
Find the new pressure in (a) before you open the solution:
Idea The tube keeps the pressure equal in both flasks, but the temperatures differ, so the gas is not a single sample at one $T$. What is conserved is the total amount: $n_1+n_2=\text{constant}$, with $n=pV/RT$ for each flask.
(a) $\dfrac{p_0(V_1+V_2)}{T_0}=p\left(\dfrac{V_1}{T_1}+\dfrac{V_2}{T_2}\right)$: $\ \dfrac{1.0\times3.0}{300}=p\left(\dfrac{1.0}{300}+\dfrac{2.0}{400}\right)$, so $0.0100=p\times0.00833$ and $p=1.2\ \text{atm}$.
(b) In units of $\text{atm L/K}$ (proportional to moles): the hot flask held $\tfrac{1.0\times2.0}{300}=0.00667$ and now holds $\tfrac{1.2\times2.0}{400}=0.00600$. It lost $0.00067$ out of a total of $0.0100$: $\tfrac{1}{15}\approx6.7\%$ of all the air moved into the cold flask.
Check The pressure rises less than in a sealed $2.0\ \text{L}$ flask heated alone ($\tfrac{400}{300}=1.33\ \text{atm}$), because some gas escapes into the cold flask ✓. The cold flask's amount rose from $0.00333$ to $\tfrac{1.2\times1.0}{300}=0.00400$ — the same $0.00067$ ✓.
⏱ Shortcut Write "moles $\propto pV/T$" and conserve $\sum pV/T$; never add pressures or volumes of gases at different temperatures.

The absolute pressure of a fixed mass of ideal gas is doubled and at the same time its kelvin temperature is doubled. Its density

Work done on compressing a gas

To squeeze a gas into a smaller volume we must push on it, and pushing through a distance is work. Picture gas in a cylinder closed by a piston of area $A$. If the gas pressure is $p$, the gas pushes on the piston with force $pA$. When the piston moves outward a small distance $dx$, the gas does work $dW=pA\,dx=p\,dV$, where $dV=A\,dx$ is the increase in volume. The process must be quasi-static (slow enough for the gas to have a single, well-defined pressure at every instant) for $p$ to have a meaning during it.

📘 Definition 9.3 — Work done by a gas

When a gas changes volume quasi-statically from $V_1$ to $V_2$, the work done by the gas is

$$W=\int_{V_1}^{V_2}p\,dV,$$

the area under the curve of the process on a $p$–$V$ diagram. $W\gt0$ when the gas expands, $W\lt0$ when it is compressed. The work done on the gas by the surroundings is $W_\text{on}=-W$; in a compression it is positive.

We use this sign convention — $W$ is work done by the gas, so that the first law reads $\Delta U=Q-W$ — throughout the course; it is set up with the first law in Section 8.1, and Section 8.2 treats isothermal and adiabatic processes in full. Here we need only the work itself. Because the area under a curve depends on the curve, the work done in going from one state to another depends on the path, not just on the end states.

📐 Result 9.2 — Work in simple processes of an ideal gas

For $n$ moles of an ideal gas going quasi-statically from $(p_1,V_1,T_1)$ to $(p_2,V_2,T_2)$:

  • constant volume (isochoric): $W=0$;
  • constant pressure (isobaric): $W=p\,(V_2-V_1)=nR\,(T_2-T_1)$;
  • constant temperature (isothermal): $W=nRT\ln\dfrac{V_2}{V_1}=nRT\ln\dfrac{p_1}{p_2}$.

So the work done on a gas compressed isothermally from $V_1$ to a smaller $V_2$ is $W_\text{on}=nRT\ln\dfrac{V_1}{V_2}$. For any closed cycle the net work done by the gas equals the area enclosed on the $p$–$V$ diagram (positive if the cycle runs clockwise).

Derivation of the isothermal result. At constant $T$ the pressure at volume $V$ is $p=nRT/V$, so

$$W=\int_{V_1}^{V_2}\frac{nRT}{V}\,dV=nRT\Big[\ln V\Big]_{V_1}^{V_2},$$ $$W=nRT\ln\frac{V_2}{V_1}.$$

Since $p_1V_1=p_2V_2$ at constant $T$, $V_2/V_1=p_1/p_2$. Notice two things. The isothermal work depends only on the ratio of volumes, so compressing from $10\ \text{L}$ to $5\ \text{L}$ needs exactly as much work as from $2\ \text{L}$ to $1\ \text{L}$. And at a higher temperature the same compression needs more work, because the gas pushes back harder at every volume.

🧭 Problem-solving strategy — Work done by or on a gas
  1. Identify the process: what is constant ($V$, $p$ or $T$)? If none, sketch the path on a $p$–$V$ diagram.
  2. Use the matching formula of Result 9.2, or find the area under the path (rectangles, triangles, trapezia for straight-line paths).
  3. Fix the sign: expansion means the gas does positive work; compression means positive work is done on the gas.
  4. Convert to SI: $1\ \text{L}=10^{-3}\ \text{m}^3$, $1\ \text{atm}=1.013\times10^5\ \text{Pa}$; then $\text{Pa}\times\text{m}^3=\text{J}$ (and $1\ \text{atm L}=101.3\ \text{J}$).
✏️ Example 3 — Same start, same finish, different work
$0.50\ \text{mol}$ of an ideal gas at $300\ \text{K}$ occupies $10\ \text{L}$. It is compressed to $2.5\ \text{L}$ and ends at $300\ \text{K}$ again. Find the work done on the gas if (a) the compression is isothermal; (b) the gas is first compressed at its initial constant pressure to $2.5\ \text{L}$ (it cools as it does so) and then heated at constant volume back to $300\ \text{K}$. Also find the initial and final pressures.
Find the work done on the gas in the isothermal compression (a):
Pressures $nRT=0.50\times8.31\times300=1246.5\ \text{J}$. $\ p_1=\dfrac{1246.5}{0.010}=1.25\times10^5\ \text{Pa}$; $\ p_2=\dfrac{1246.5}{0.0025}=4.99\times10^5\ \text{Pa}$ (four times larger, as Boyle's law says).
(a) $W_\text{on}=nRT\ln\dfrac{V_1}{V_2}=1246.5\times\ln4=1246.5\times1.386=1.73\times10^3\ \text{J}$.
(b) Constant-pressure step: $W_\text{on}=p_1(V_1-V_2)=1.25\times10^5\times7.5\times10^{-3}=935\ \text{J}$ (the temperature falls to $300/4=75\ \text{K}$). Constant-volume step: no work. Total $W_\text{on}=935\ \text{J}$.
Check Same end states, different work ($1730\ \text{J}$ against $935\ \text{J}$): on the $p$–$V$ diagram the isothermal curve lies above the horizontal line at $p_1$ throughout, so it encloses more area beneath it ✓. Work is a path quantity.

An ideal gas is compressed isothermally from $V$ to $V/2$, needing work $W_0$. Compressing it further, at the same temperature, from $V/2$ to $V/4$ needs

Kinetic theory: the pressure of a gas

Why should all gases obey the same equation? Kinetic theory answers by building a gas out of molecules obeying Newton's laws. The model is deliberately simple, and its assumptions describe exactly the conditions — low density, no forces between molecules — in which real gases behave ideally.

📘 Definition 9.4 — Assumptions of the kinetic theory of an ideal gas
  1. A gas consists of a very large number of identical molecules, in random motion in all directions with a range of speeds.
  2. The molecules are point-like: their total volume is negligible compared with the volume of the container.
  3. There are no forces between molecules except during collisions; between collisions each molecule moves in a straight line at constant velocity (gravity is neglected).
  4. Collisions with each other and with the walls are perfectly elastic and last a negligible time compared with the time between collisions.
  5. Newton's laws apply to every molecule, and the gas is in a steady state: the number density and the distribution of velocities are the same everywhere in the container and do not change with time.

Derivation of the pressure. Put $N$ molecules, each of mass $m$, in a cube of side $L$. Follow one molecule with velocity components $(v_x,v_y,v_z)$. When it hits the right-hand wall (perpendicular to $x$) elastically, $v_x$ reverses and $v_y$, $v_z$ are unchanged, so the molecule's momentum changes by $-2mv_x$ and, by Newton's third law, the wall receives momentum $2mv_x$. The molecule then crosses to the opposite wall and back, a distance $2L$ in the $x$-direction, before it hits the right-hand wall again, so it hits that wall every $2L/v_x$ seconds. (Collisions with other molecules only swap velocities between identical molecules, so they do not change the result.) The average force it exerts on the wall is

$$F_1=\frac{2mv_x}{2L/v_x}=\frac{mv_x^2}{L}.$$

Adding up all $N$ molecules and dividing by the wall's area $L^2$,

$$p=\frac{m}{L^3}\left(v_{x1}^2+v_{x2}^2+\dots+v_{xN}^2\right),$$ $$\text{i.e.}\quad p=\frac{Nm}{V}\,\overline{v_x^2},$$

where $\overline{v_x^2}$ is the average of $v_x^2$ over all molecules. Since $v^2=v_x^2+v_y^2+v_z^2$ for each molecule and the motion is random (no direction is special), $\overline{v_x^2}=\overline{v_y^2}=\overline{v_z^2}=\tfrac13\overline{v^2}$. This gives the central result of kinetic theory.

📐 Law 9.3 — Pressure of an ideal gas (kinetic theory)

A gas of $N$ molecules of mass $m$ in volume $V$, with mean square speed $\overline{v^2}$, exerts a pressure

$$p=\frac13\,\frac{Nm}{V}\,\overline{v^2}=\frac13\,\rho\,v_\text{rms}^2,$$

where $\rho=Nm/V$ is the density and $v_\text{rms}=\sqrt{\overline{v^2}}$ is the root-mean-square speed. Equivalently, if $E_\text{tr}=\tfrac12Nm\overline{v^2}$ is the total translational kinetic energy of the molecules, $\ p=\dfrac23\,\dfrac{E_\text{tr}}{V}$: the pressure is two-thirds of the translational kinetic energy per unit volume. The result holds for any container shape, and the assumptions are those of Definition 9.4.

Each molecule contributes to the pressure independently of the others. So in a mixture of non-reacting gases, each gas exerts the pressure it would exert if it filled the container alone — its partial pressure — and the total pressure is the sum. This is Dalton's law of partial pressures, $p=p_1+p_2+\dots$, a direct consequence of the kinetic model; for ideal gases $p_i=n_iRT/V$.

✏️ Example 4 — How fast are air molecules?
At STP ($273\ \text{K}$, $1.013\times10^5\ \text{Pa}$) the density of nitrogen is $1.25\ \text{kg/m}^3$. Find (a) the rms speed of its molecules, (b) the total translational kinetic energy of the molecules in $1.0\ \text{m}^3$, (c) the mass of one $\text{N}_2$ molecule ($M=28\ \text{g/mol}$) and the number of molecules per cubic metre.
(a) $v_\text{rms}=\sqrt{\dfrac{3p}{\rho}}=\sqrt{\dfrac{3\times1.013\times10^5}{1.25}}=\sqrt{2.43\times10^5}=493\ \text{m/s}$ — about one and a half times the speed of sound.
(b) $E_\text{tr}=\tfrac32pV=1.5\times1.013\times10^5\times1.0=1.52\times10^5\ \text{J}$ in every cubic metre.
(c) $m=\dfrac{M}{N_A}=\dfrac{0.028}{6.02\times10^{23}}=4.65\times10^{-26}\ \text{kg}$; $\ n_v=\dfrac{\rho}{m}=\dfrac{1.25}{4.65\times10^{-26}}=2.69\times10^{25}\ \text{m}^{-3}$.
Check $n_v=\dfrac{p}{k_BT}=\dfrac{1.013\times10^5}{1.38\times10^{-23}\times273}=2.69\times10^{25}\ \text{m}^{-3}$ ✓ — kinetic theory and the gas equation agree.

In Interactive 1 ($0.10\ \text{mol}$ of nitrogen) start at $T=300\ \text{K}$ and $V=2.0\ \text{L}$: the pressure is about $125\ \text{kPa}$. Now set $T=600\ \text{K}$ and $V=4.0\ \text{L}$. What happens to the pressure?

At $300\ \text{K}$, $2.0\ \text{L}$ the readouts show $p=125\ \text{kPa}$ and $v_\text{rms}=517\ \text{m/s}$. At $600\ \text{K}$, $4.0\ \text{L}$ the pressure is again $125\ \text{kPa}$ while $v_\text{rms}=731\ \text{m/s}$ and the average kinetic energy per molecule has doubled from $6.21$ to $12.42\times10^{-21}\ \text{J}$. Each molecule is now $\sqrt2$ times faster, so every hit is $\sqrt2$ times harder and the round trips are $\sqrt2$ times quicker — a factor $2$ in the force — but the piston is twice as far away, which halves how often it is hit. The two factors cancel: $p=nRT/V$ is unchanged. Note that doubling $T$ multiplies the speed by $\sqrt2$, not $2$. With Play on, the "pressure from piston hits" readout counts the actual impacts and agrees with $nRT/V$ to within the random scatter.
Interactive 1 — Gas in a Box: Pressure from Molecular Hits

Forty molecules stand in for $0.10\ \text{mol}$ of nitrogen in a cylinder closed by a piston. Red molecules are faster than the rms speed, blue ones slower. Change the temperature (the molecules speed up as $\sqrt T$) and the volume (the piston moves), and press Play. Every hit on the piston flashes amber; the widget adds up the momentum the molecules give the piston and converts it to a pressure, to compare with $p=nRT/V$.

300 K2.0 L
$p=nRT/V$—
$v_\text{rms}$—
KE per molecule—
pressure from piston hits—

The speed of every molecule of a gas in a closed rigid container is suddenly doubled. The pressure of the gas becomes

Kinetic interpretation of temperature; molecular speeds

Put the kinetic result next to the gas equation. Kinetic theory gives $pV=\tfrac13Nm\overline{v^2}=\tfrac23\left(N\cdot\tfrac12m\overline{v^2}\right)$; experiment gives $pV=Nk_BT$. Both describe the same gas, so

$$\tfrac12m\overline{v^2}=\tfrac32k_BT .$$

This is one of the deepest results in physics: temperature, which we first met as "how hot something feels", is a measure of the average kinetic energy of random molecular motion.

📐 Law 9.4 — Kinetic interpretation of temperature

In an ideal gas at absolute temperature $T$, the average translational kinetic energy of a molecule is

$$\overline{K}=\tfrac12m\overline{v^2}=\tfrac32k_BT,$$

the same for every gas at that temperature, whatever the mass of its molecules. The total translational kinetic energy of $n$ moles is $E_\text{tr}=\tfrac32nRT=\tfrac32pV$. It follows that

$$v_\text{rms}=\sqrt{\frac{3k_BT}{m}}=\sqrt{\frac{3RT}{M}},$$ $$v_\text{rms}=\sqrt{\frac{3p}{\rho}} .$$

So $v_\text{rms}\propto\sqrt{T}$ for a given gas, and $v_\text{rms}\propto1/\sqrt{M}$ for different gases at the same temperature.

Two consequences. First, Avogadro's law follows: two gases at the same $p$, $V$ and $T$ have $N=pV/k_BT$ molecules each — the same number, whatever the gas. Second, $T=0$ would mean zero molecular kinetic energy: absolute zero is the temperature at which (in this classical picture) molecular motion would stop. In a mixture at one temperature, light and heavy molecules share the same average kinetic energy, so the light ones move faster: at $300\ \text{K}$ hydrogen molecules have $v_\text{rms}=1.93\ \text{km/s}$ but oxygen only $0.48\ \text{km/s}$. That is one reason Earth has lost almost all its free hydrogen to space while keeping its oxygen and nitrogen.

The molecules do not all move at $v_\text{rms}$. Collisions constantly share energy among them, and in equilibrium their speeds follow a definite spread — the Maxwell distribution, sketched in Interactive 2. Few molecules are nearly at rest, few are very fast, and the curve has a single peak. Three "typical" speeds describe it.

📘 Definition 9.5 — Average, rms and most probable speeds

For $N$ molecules with speeds $v_1,v_2,\dots,v_N$:

  • average (mean) speed $\ \bar v=\dfrac{v_1+v_2+\dots+v_N}{N}$;
  • root-mean-square speed $\ v_\text{rms}=\sqrt{\dfrac{v_1^2+v_2^2+\dots+v_N^2}{N}}$;
  • most probable speed $v_\text{mp}$: the speed at the peak of the distribution — the speed near which the largest number of molecules move.
📐 Result 9.5 — The three molecular speeds of an ideal gas

For an ideal gas of molar mass $M$ at temperature $T$ in equilibrium (Maxwell distribution),

$$v_\text{mp}=\sqrt{\frac{2RT}{M}},\qquad \bar v=\sqrt{\frac{8RT}{\pi M}},$$ $$v_\text{rms}=\sqrt{\frac{3RT}{M}},$$

so $v_\text{mp}\lt\bar v\lt v_\text{rms}$ always, in the fixed ratio $\sqrt2:\sqrt{8/\pi}:\sqrt3\approx1:1.13:1.22$. All three grow as $\sqrt{T/M}$. (We quote $v_\text{mp}$ and $\bar v$; their derivation needs the full Maxwell distribution and is not required for JEE Main.)

Why is $v_\text{rms}$ larger than $\bar v$? Squaring gives extra weight to the fast molecules, so the root of the mean square is pulled above the plain mean. For any set of numbers that are not all equal, $v_\text{rms}\gt\bar v$ (and the two are equal only if every molecule has the same speed). As the temperature rises, the whole distribution shifts to higher speeds and becomes lower and broader — the area under it, which is the total number of molecules, stays the same.

✏️ Example 5 — Oxygen at room temperature
For oxygen ($M=32\ \text{g/mol}$) at $27^\circ\text{C}$ find (a) $v_\text{rms}$, $\bar v$ and $v_\text{mp}$; (b) the temperature at which $v_\text{rms}$ is twice as large; (c) the temperature at which hydrogen molecules ($M=2.0\ \text{g/mol}$) have the same rms speed as the oxygen molecules at $27^\circ\text{C}$.
(a) $\dfrac{RT}{M}=\dfrac{8.31\times300}{0.032}=7.79\times10^4\ \text{m}^2/\text{s}^2$. $\ v_\text{rms}=\sqrt{3\times7.79\times10^4}=483\ \text{m/s}$; $\ \bar v=\sqrt{\tfrac{8}{\pi}\times7.79\times10^4}=445\ \text{m/s}$; $\ v_\text{mp}=\sqrt{2\times7.79\times10^4}=395\ \text{m/s}$.
(b) $v_\text{rms}\propto\sqrt T$: doubling it needs $4T=1200\ \text{K}$, i.e. $927^\circ\text{C}$ (not $54^\circ\text{C}$ — always work in kelvin).
(c) Equal $v_\text{rms}$ means equal $T/M$: $T_\text{H}=300\times\dfrac{2.0}{32}=18.8\ \text{K}$.
Check Set O₂ and $300\ \text{K}$ in Interactive 2: the readouts give $395$, $445$ and $483\ \text{m/s}$ ✓, in the ratio $1:1.13:1.22$.

In Interactive 2, oxygen at $300\ \text{K}$ has $v_\text{rms}=483\ \text{m/s}$. Which gas, at the same temperature, has an rms speed four times larger?

Keep $T=300\ \text{K}$ and switch to H₂: the readout shows $v_\text{rms}=1934\ \text{m/s}$, which is $4.00$ times $483\ \text{m/s}$. Since $v_\text{rms}=\sqrt{3RT/M}$, a factor 4 in speed needs a factor 16 in molar mass: $32/2=16$. Helium gives only $\sqrt8=2.83$ times ($1367\ \text{m/s}$). At the same temperature it is the average kinetic energy that is the same for all gases, not the speed. Notice also how the hydrogen curve is spread over a far wider range of speeds (the axis is rescaled for each gas).
Interactive 2 — The Spread of Molecular Speeds

The shaded curve is the Maxwell distribution of molecular speeds for the chosen gas and temperature: its height at speed $v$ shows how many molecules move near that speed. The dashed curve is the same gas at $300\ \text{K}$. The three lines mark $v_\text{mp}$ (green), $\bar v$ (purple) and $v_\text{rms}$ (red). Press Play to sweep the temperature from $100$ to $1500\ \text{K}$ and watch the peak move right and flatten.

300 K
$v_\text{mp}$—
$\bar v$—
$v_\text{rms}$—
KE per molecule—
✏️ Example 6 — A mixture of oxygen and helium
A $20\ \text{L}$ vessel contains $1.0\ \text{mol}$ of oxygen ($M=32\ \text{g/mol}$) and $2.0\ \text{mol}$ of helium ($M=4.0\ \text{g/mol}$) at $300\ \text{K}$. Find (a) the partial pressure of each gas and the total pressure; (b) the ratio of the average translational kinetic energy of an oxygen molecule to that of a helium atom; (c) the ratio $v_\text{rms,O}:v_\text{rms,He}$; (d) the total translational kinetic energy of all the molecules in the vessel.
Find the total translational kinetic energy in (d) first:
(a) $p_\text{O}=\dfrac{n_\text{O}RT}{V}=\dfrac{1.0\times8.31\times300}{0.020}=1.25\times10^5\ \text{Pa}$; $\ p_\text{He}=2.49\times10^5\ \text{Pa}$. Dalton: $p=3.74\times10^5\ \text{Pa}$.
(b) $\overline{K}=\tfrac32k_BT$ depends only on $T$: the ratio is $1:1$ ($6.21\times10^{-21}\ \text{J}$ each).
(c) $\dfrac{v_\text{rms,O}}{v_\text{rms,He}}=\sqrt{\dfrac{M_\text{He}}{M_\text{O}}}=\sqrt{\dfrac{4}{32}}=\dfrac{1}{2\sqrt2}=0.354$: the oxygen molecules are $2.83$ times slower.
(d) $E_\text{tr}=\tfrac32(n_\text{O}+n_\text{He})RT=1.5\times3.0\times8.31\times300=1.12\times10^4\ \text{J}$.
Check $E_\text{tr}=\tfrac32pV=1.5\times3.74\times10^5\times0.020=1.12\times10^4\ \text{J}$ ✓. (This counts only translation; oxygen molecules also rotate — Section 9.2.)
⚠️ JEE Main traps

1. Celsius in the gas laws. $pV=nRT$, $v_\text{rms}\propto\sqrt T$ and $\overline K\propto T$ need kelvin. "Heated from $27^\circ\text{C}$ to $327^\circ\text{C}$" doubles $T$ (300 K to 600 K), not multiplies it by $12$.

2. Molar mass in g/mol. In $v=\sqrt{3RT/M}$ the molar mass must be in kg/mol ($0.032$ for O₂). Using $32$ gives a speed $\sqrt{1000}\approx32$ times too small.

3. Same temperature means same average KE, not same speed. At one $T$, every gas has $\overline K=\tfrac32k_BT$ per molecule; the lighter gas is faster, $v_\text{rms}\propto1/\sqrt M$.

4. Mixing up the three speeds. $v_\text{mp}:\bar v:v_\text{rms}=\sqrt2:\sqrt{8/\pi}:\sqrt3$; the rms speed is the largest. For a list of given speeds compute $\bar v$ and $v_\text{rms}$ from the definitions — never from $\sqrt{3RT/M}$.

5. Gauge pressure and "doubling". Use absolute pressure in $pV=nRT$. Doubling the speed of every molecule multiplies $p$ (and $T$) by $4$; doubling $T$ multiplies the speed by $\sqrt2$ only.

A container holds helium and oxygen in thermal equilibrium. Compared with an oxygen molecule, a helium atom has

Exercises

Treat every gas as ideal. Take $R=8.31\ \text{J mol}^{-1}\text{K}^{-1}$, $k_B=1.38\times10^{-23}\ \text{J/K}$, $N_A=6.02\times10^{23}\ \text{mol}^{-1}$, $1\ \text{atm}=1.013\times10^5\ \text{Pa}$, $g=9.8\ \text{m/s}^2$ and $T/\text{K}=t/{}^\circ\text{C}+273$ unless told otherwise.

I
The equation of state.
  • 1 Find the pressure of $2.0\ \text{mol}$ of gas held in $10\ \text{L}$ at $27^\circ\text{C}$.
  • 2 How many molecules are there in $1.0\ \text{cm}^3$ of any gas at STP ($273\ \text{K}$, $1\ \text{atm}$)?
  • 3 Find the density of carbon dioxide ($M=44\ \text{g/mol}$) at $1\ \text{atm}$ and $300\ \text{K}$.
  • 4 An air bubble rises from the bottom of a lake $20\ \text{m}$ deep, where the water is at $7^\circ\text{C}$, to the surface, where it is at $27^\circ\text{C}$ (density of water $1.0\times10^3\ \text{kg/m}^3$). By what factor does its volume grow?
  • 5 A car tyre holds air at an absolute pressure of $3.0\ \text{atm}$ at $15^\circ\text{C}$. After a long drive the air is at $45^\circ\text{C}$. Assuming the volume is constant, find the new pressure.
  • 6 A cylinder contains $4.0\ \text{kg}$ of gas at $15\ \text{atm}$ and $27^\circ\text{C}$. Some gas is used, after which the pressure is $10\ \text{atm}$ and the temperature $17^\circ\text{C}$. What mass of gas was used?
  • 7 Show from $pV=Nk_BT$ that equal volumes of two different gases at the same temperature and pressure contain equal numbers of molecules.
  • 8 Explain why real gases follow $pV=nRT$ closely at low pressure and high temperature but not near liquefaction.
1 $p=\dfrac{nRT}{V}=\dfrac{2.0\times8.31\times300}{0.010}=4.99\times10^5\ \text{Pa}$ (about $4.9\ \text{atm}$).
2 $N=\dfrac{pV}{k_BT}=\dfrac{1.013\times10^5\times1.0\times10^{-6}}{1.38\times10^{-23}\times273}=2.69\times10^{19}$.
3 $\rho=\dfrac{pM}{RT}=\dfrac{1.013\times10^5\times0.044}{8.31\times300}=1.79\ \text{kg/m}^3$.
4 $p_1=1.013\times10^5+1000\times9.8\times20=2.97\times10^5\ \text{Pa}$, $p_2=1.013\times10^5\ \text{Pa}$; $\ \dfrac{V_2}{V_1}=\dfrac{p_1}{p_2}\cdot\dfrac{T_2}{T_1}=2.935\times\dfrac{300}{280}=3.14$.
5 Constant volume: $p_2=3.0\times\dfrac{318}{288}=3.31\ \text{atm}$.
6 Fixed $V$: $m\propto p/T$. $\ m_2=4.0\times\dfrac{10}{15}\times\dfrac{300}{290}=2.76\ \text{kg}$; used $4.0-2.76=1.24\ \text{kg}$.
7 $N=\dfrac{pV}{k_BT}$ contains only $p$, $V$, $T$ and the universal constant $k_B$ — nothing about the gas — so equal $p$, $V$, $T$ give equal $N$ (Avogadro's law).
8 At low pressure the molecules are far apart, so their own volume is negligible and the attractive forces between them hardly act; at high temperature their kinetic energy is large compared with the attraction. Near liquefaction the molecules are close and slow, the attractions reduce the pressure and their finite size reduces the free volume, so the kinetic-theory assumptions fail.
II
Work done on or by a gas.
  • 1 $0.20\ \text{mol}$ of gas is cooled at constant pressure from $400\ \text{K}$ to $300\ \text{K}$. Find the work done on the gas.
  • 2 $1.0\ \text{mol}$ of gas is compressed isothermally at $300\ \text{K}$ from $6.0\ \text{L}$ to $2.0\ \text{L}$. Find the work done on it ($\ln3=1.099$).
  • 3 In part 2 the initial pressure was $p_0$. What is the final pressure?
  • 4 Explain why no work is done when a gas in a rigid steel cylinder is heated.
  • 5 A gas is compressed from $4.0\ \text{L}$ at $1.0\times10^5\ \text{Pa}$ to $1.0\ \text{L}$ at $4.0\times10^5\ \text{Pa}$ along a straight line on the $p$–$V$ diagram. Find the work done on it.
  • 6 Find the work done on $2.0\ \text{mol}$ of gas compressed isothermally to half its volume at $600\ \text{K}$. Is it more or less than at $300\ \text{K}$?
  • 7 A gas is taken round the rectangular cycle: expand at $2.0\times10^5\ \text{Pa}$ from $1.0\ \text{L}$ to $3.0\ \text{L}$; cool at constant volume to $1.0\times10^5\ \text{Pa}$; compress at that pressure to $1.0\ \text{L}$; heat at constant volume back to the start. Find the net work done by the gas per cycle.
  • 8 Show that for $n$ moles of ideal gas at constant pressure, $W=p\Delta V=nR\Delta T$, and hence that $R$ is the work done by one mole heated through $1\ \text{K}$ at constant pressure.
1 $W=nR\Delta T=0.20\times8.31\times(-100)=-166\ \text{J}$ by the gas, so $166\ \text{J}$ is done on it.
2 $W_\text{on}=nRT\ln\dfrac{V_1}{V_2}=8.31\times300\times\ln3=2493\times1.099=2.74\times10^3\ \text{J}$.
3 Boyle's law: $p=p_0\times\dfrac{6.0}{2.0}=3p_0$.
4 Work needs a change of volume ($W=\int p\,dV$). A rigid cylinder keeps $dV=0$, so all the heat goes into internal energy and the pressure rises.
5 Area of the trapezium: $\tfrac12(1.0+4.0)\times10^5\times3.0\times10^{-3}=750\ \text{J}$ done on the gas.
6 $W_\text{on}=2.0\times8.31\times600\times\ln2=6.91\times10^3\ \text{J}$ — twice as much as at $300\ \text{K}$, because at every volume the pressure is twice as large.
7 Enclosed area: $(2.0-1.0)\times10^5\times(3.0-1.0)\times10^{-3}=200\ \text{J}$, positive since the cycle runs clockwise (expansion at the higher pressure).
8 $W=p(V_2-V_1)=pV_2-pV_1=nRT_2-nRT_1=nR\Delta T$. With $n=1$ and $\Delta T=1\ \text{K}$, $W=R=8.31\ \text{J}$.
III
Pressure and temperature from kinetic theory.
  • 1 Helium at $1.0\times10^5\ \text{Pa}$ has a density of $0.18\ \text{kg/m}^3$. Find the rms speed of its atoms.
  • 2 Find the average translational kinetic energy of a gas molecule at $27^\circ\text{C}$.
  • 3 At what temperature is the average translational kinetic energy of a molecule equal to $1.6\times10^{-19}\ \text{J}$ ($1\ \text{eV}$)?
  • 4 Find the rms speed of nitrogen molecules ($M=28\ \text{g/mol}$) at $300\ \text{K}$.
  • 5 Find the ratio of the rms speeds of hydrogen and oxygen molecules at the same temperature.
  • 6 At what temperature do hydrogen molecules have the same rms speed as oxygen molecules at $47^\circ\text{C}$?
  • 7 Find the total translational kinetic energy of the molecules in $1.0\ \text{L}$ of air at $1\ \text{atm}$.
  • 8 Every second $1.0\times10^{23}$ molecules, each of mass $4.7\times10^{-26}\ \text{kg}$, strike $1.0\ \text{cm}^2$ of a wall head-on at $500\ \text{m/s}$ and rebound elastically. Find the pressure they exert.
1 $v_\text{rms}=\sqrt{3p/\rho}=\sqrt{3\times10^5/0.18}=1.29\times10^3\ \text{m/s}$.
2 $\overline K=\tfrac32k_BT=1.5\times1.38\times10^{-23}\times300=6.21\times10^{-21}\ \text{J}$.
3 $T=\dfrac{2\overline K}{3k_B}=\dfrac{2\times1.6\times10^{-19}}{3\times1.38\times10^{-23}}=7.7\times10^3\ \text{K}$ — so molecules at room temperature have only about $\tfrac1{26}\ \text{eV}$.
4 $v_\text{rms}=\sqrt{\dfrac{3\times8.31\times300}{0.028}}=517\ \text{m/s}$.
5 $\dfrac{v_\text{H}}{v_\text{O}}=\sqrt{\dfrac{32}{2}}=4$, i.e. $4:1$.
6 Equal $T/M$: $T_\text{H}=320\times\dfrac{2}{32}=20\ \text{K}$ ($-253^\circ\text{C}$).
7 $E_\text{tr}=\tfrac32pV=1.5\times1.013\times10^5\times1.0\times10^{-3}=152\ \text{J}$ (independent of the kind of gas).
8 Momentum given per second $=1.0\times10^{23}\times2\times4.7\times10^{-26}\times500=4.7\ \text{N}$; $p=\dfrac{4.7}{1.0\times10^{-4}}=4.7\times10^4\ \text{Pa}$.
IV
Molecular speeds, mixtures and harder problems.
  • 1 Five molecules have speeds $100$, $200$, $300$, $400$ and $500\ \text{m/s}$. Find their average speed and their rms speed.
  • 2 Find the most probable and average speeds of nitrogen molecules at $300\ \text{K}$.
  • 3 A $10\ \text{L}$ vessel holds $2.0\ \text{mol}$ of helium and $1.0\ \text{mol}$ of argon at $300\ \text{K}$. Find the partial pressure of helium and the total pressure.
  • 4 To what temperature (in $^\circ\text{C}$) must a gas at $27^\circ\text{C}$ be heated to increase its rms speed by $20\%$?
  • 5 Compare the rms speed of hydrogen molecules at $300\ \text{K}$ with Earth's escape speed, $11.2\ \text{km/s}$. Why has Earth nevertheless lost most of its hydrogen?
  • 6 $4.0\ \text{g}$ of helium and $32\ \text{g}$ of oxygen are put into a $5.0\ \text{L}$ vessel at $27^\circ\text{C}$. Find the pressure.
  • 7 In a sealed rigid vessel the kelvin temperature of a gas is increased until its rms speed doubles. By what factors have the pressure and the average kinetic energy per molecule changed?
  • 8 The rms speed of the molecules of a gas at $300\ \text{K}$ is $500\ \text{m/s}$. Find the molar mass of the gas.
1 $\bar v=\dfrac{1500}{5}=300\ \text{m/s}$; $\ v_\text{rms}=\sqrt{\dfrac{(1+4+9+16+25)\times10^4}{5}}=100\sqrt{11}=332\ \text{m/s}$ — larger than $\bar v$, as it must be.
2 $v_\text{mp}=\sqrt{\dfrac{2\times8.31\times300}{0.028}}=422\ \text{m/s}$; $\ \bar v=\sqrt{\dfrac{8\times8.31\times300}{\pi\times0.028}}=476\ \text{m/s}$.
3 $p_\text{He}=\dfrac{2.0\times8.31\times300}{0.010}=4.99\times10^5\ \text{Pa}$; $\ p=\dfrac{3.0\times8.31\times300}{0.010}=7.48\times10^5\ \text{Pa}$.
4 $T\propto v_\text{rms}^2$: $T=300\times1.2^2=432\ \text{K}=159^\circ\text{C}$.
5 $v_\text{rms}=1.93\ \text{km/s}$, only $0.17$ of the escape speed. But the speeds are spread out: a small fraction of molecules in the fast tail of the distribution, high in the hot upper atmosphere, exceeds $11.2\ \text{km/s}$ and escapes; over billions of years this drains away the light gases while heavy ones (with $v_\text{rms}$ four times smaller) stay.
6 $n=\dfrac{4.0}{4.0}+\dfrac{32}{32}=2.0\ \text{mol}$; $\ p=\dfrac{2.0\times8.31\times300}{5.0\times10^{-3}}=9.97\times10^5\ \text{Pa}$.
7 $v_\text{rms}\propto\sqrt T$, so $T$ becomes $4$ times larger; at constant volume $p\propto T$, so $p\times4$; and $\overline K\propto T$, also $\times4$.
8 $M=\dfrac{3RT}{v_\text{rms}^2}=\dfrac{3\times8.31\times300}{2.5\times10^5}=0.0299\ \text{kg/mol}\approx30\ \text{g/mol}$ (nitric oxide, NO, for instance).
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ For an ideal gas in equilibrium, the most probable speed $v_\text{mp}$, the average speed $\bar v$ and the rms speed $v_\text{rms}$ are in the ratio (A) $\sqrt3:\sqrt{8/\pi}:\sqrt2$ (B) $1:1:1$ (C) $\sqrt2:\sqrt{8/\pi}:\sqrt3$ (D) $\sqrt2:\sqrt3:\sqrt{8/\pi}$

Idea $v_\text{mp}=\sqrt{2RT/M}$, $\bar v=\sqrt{8RT/\pi M}$, $v_\text{rms}=\sqrt{3RT/M}$; the common factor $\sqrt{RT/M}$ cancels.
Order $\sqrt2=1.41\lt\sqrt{8/\pi}=1.60\lt\sqrt3=1.73$, so the order mp, mean, rms is increasing.
Answer (C).
⏱ Shortcut Remember "2, 8/π, 3" under the root — in that order, smallest first. (A) is the right numbers in reverse; (D) puts the rms speed in the middle, which is impossible.

E2. JEE Main · Numerical A gas is at $27^\circ\text{C}$. To what temperature, in $^\circ\text{C}$, must it be heated so that the rms speed of its molecules doubles? Take $0^\circ\text{C}=273\ \text{K}$. Give the answer to the nearest integer.

Idea $v_\text{rms}\propto\sqrt T$ with $T$ in kelvin, so doubling $v_\text{rms}$ needs $4T$.
Number $T_2=4\times300=1200\ \text{K}$, i.e. $1200-273=927^\circ\text{C}$.
Answer $927$.
⏱ Shortcut The trap answers are $54$ (doubling the Celsius value twice) and $327$ (doubling $T$ instead of quadrupling it).

E3. JEE Main · MCQ Vessel A contains hydrogen at pressure $p$ and temperature $T$. Vessel B, of the same volume, contains oxygen at pressure $2p$ and temperature $2T$. The ratio of the number of molecules in A to that in B is (A) $1:1$ (B) $1:2$ (C) $1:4$ (D) $1:16$

Idea $N=\dfrac{pV}{k_BT}$: the kind of gas does not enter.
Ratio $\dfrac{N_A}{N_B}=\dfrac{p/T}{2p/2T}=1$.
Answer (A) $1:1$.
⏱ Shortcut Molar masses are a distraction: they matter for mass and speed, never for the number of molecules at given $p$, $V$, $T$. (D) comes from wrongly using the mass ratio $1:16$.

E4. JEE Main · Numerical $2.0\ \text{mol}$ of an ideal gas at $400\ \text{K}$ is compressed isothermally to one quarter of its volume. Taking $R=8.31\ \text{J mol}^{-1}\text{K}^{-1}$ and $\ln2=0.693$, find the work done on the gas in kJ. Give the answer to the nearest integer.

Formula $W_\text{on}=nRT\ln\dfrac{V_1}{V_2}=nRT\ln4=2nRT\ln2$.
Number $W_\text{on}=2\times2.0\times8.31\times400\times0.693=9.21\times10^3\ \text{J}=9.2\ \text{kJ}$.
Answer $9$.

E5. JEE Main · MCQ In a gas, the mass of each molecule is halved and the speed of each molecule is doubled, while the number of molecules per unit volume stays the same. If the original pressure was $p$, the new pressure is (A) $p/2$ (B) $p$ (C) $4p$ (D) $2p$

Idea $p=\tfrac13n_v\,m\,\overline{v^2}\propto m\,v^2$ at fixed number density.
Factor $\tfrac12\times2^2=2$.
Answer (D) $2p$.
⏱ Shortcut $p=\tfrac23n_v\overline K$: the kinetic energy per molecule $\tfrac12mv^2$ doubles, so $p$ doubles. (C) forgets the halved mass.

E6. JEE Main · Numerical Two identical flasks joined by a narrow tube contain air at $300\ \text{K}$ and $101.3\ \text{kPa}$. One flask is then kept at $300\ \text{K}$ and the other is heated to $600\ \text{K}$. Neglecting the volume of the tube and any expansion of the flasks, find the final pressure in kPa. Give the answer to the nearest integer.

Idea The total number of moles is conserved and the pressure is common: $\dfrac{p_0(2V)}{T_0}=p\left(\dfrac{V}{T_0}+\dfrac{V}{T_1}\right)$.
Solve $p=\dfrac{2p_0/300}{1/300+1/600}=\dfrac{2p_0}{1.5}=\tfrac43p_0=\tfrac43\times101.3=135.1\ \text{kPa}$.
Answer $135$.
⏱ Shortcut For two equal flasks, $p=p_0\cdot\dfrac{2T_1}{T_0+T_1}$ when one goes from $T_0$ to $T_1$ — here $p_0\times\dfrac{1200}{900}$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. Can you find absolute zero with a bottle of air, a thermometer and a pressure gauge — and how close to $-273^\circ\text{C}$ do you get?

Why it matters. The constant-volume gas thermometer, which uses exactly this idea, defined the kelvin scale for a century and is still used in metrology laboratories to calibrate thermometers at very low temperatures. Engineers use $pV=nRT$ daily: tyre-pressure monitoring in cars and aircraft, compressed-gas storage for hospitals and divers, and the design of weather and research balloons all rest on the same law.

What to do.

  1. Seal a rigid metal or thick glass bottle with a stopper carrying a tube to a pressure gauge (a digital tyre gauge, or a phone or school pressure sensor); keep the tube short so most of the air is inside the bottle.
  2. Stand the bottle in turn in ice–water, cold tap water, warm water and near-boiling water, wait a few minutes each time, and record the water temperature and the absolute pressure (gauge reading plus atmospheric pressure).
  3. Plot $p$ against $t$ in $^\circ\text{C}$, draw the best straight line and extend it to $p=0$. Read off the intercept on the temperature axis.
  4. Estimate the uncertainty of the intercept from the steepest and shallowest lines that fit your points.

Tools: Rigid bottle, stopper and tubing, pressure gauge or sensor, thermometer, kettle and ice, spreadsheet for the graph.

Hand in: Your table and graph, the intercept with its uncertainty, and a short paragraph naming the two largest sources of error and their effect on the intercept.

Going further. Repeat with a different amount of air in the bottle (a different starting pressure). Do the lines have the same intercept? What does kinetic theory say the molecules are doing at that temperature?

Instructor note: careful work usually gives intercepts between about $-250^\circ\text{C}$ and $-300^\circ\text{C}$. The main errors are air in the tube not being at the bath temperature, slow thermal equilibrium of the bottle, and small leaks; all tend to flatten the line and push the intercept further from $-273^\circ\text{C}$. Emphasise that the intercept does not depend on the amount of gas — only the slope does.

🧪 Self-check quiz

0/5 correct

Q1. The average translational kinetic energy of a molecule of an ideal gas depends on

Q2. The rms speed of oxygen molecules at a certain temperature is $v$. The rms speed of helium atoms at the same temperature is

Q3. The pressure of an ideal gas is $p$. The total translational kinetic energy of its molecules per unit volume is

Q4. $1.0\ \text{mol}$ of an ideal gas is compressed isothermally at temperature $T$ from volume $3V$ to $V$. The work done on the gas is

Q5. Four molecules have speeds $1$, $2$, $3$ and $4\ \text{km/s}$. Their rms speed is closest to