Chapter 3 · Introduction

Chapter 3 — Laws of Motion

Chapter 2 described motion; this chapter explains it. Force changes momentum, forces come in action–reaction pairs, and with free-body diagrams, friction and the centripetal force you can solve blocks, pulleys, lifts and cars on curves.

Ride a fast lift in a tall building with a bathroom scale under your feet and watch the reading: it jumps up as the lift starts upwards, settles back to your true weight while the lift cruises, and drops below it as the lift slows near the top. A loaded truck brakes hard and the crates on its open deck slide forward although nothing pushed them. A bus takes a hairpin bend on a ghat road and the passengers sway outwards, while the road itself is tilted to help the bus round. A rifle kicks back into the shooter's shoulder. None of these needs a new law of nature — each is the same three laws at work.

Newton's first law says a body keeps its velocity unless a net force acts; the second law says how fast the force changes its momentum, $\mathbf{F}=\dfrac{d\mathbf{p}}{dt}$, which becomes $\mathbf{F}=m\mathbf{a}$ for a fixed mass; the third law pairs every force with an equal and opposite one on the other body, and from it follows the conservation of momentum. To use the laws you will learn one skill above all: isolate each body, draw a free-body diagram, and write $\sum\mathbf{F}=m\mathbf{a}$ for it — for blocks in contact, strings over pulleys, lifts and accelerating frames. Then come the two forces that make everyday life possible: friction, which adjusts itself up to $\mu_sN$, and the centripetal force $mv^2/r$ that friction, tension, the normal force or gravity must supply for anything to move on a curve. Laws of motion is one of the most tested units of JEE Main, and its methods return in work and energy, rotation, gravitation and the motion of charges in fields.

Inertia→First law→$\mathbf{F}=\tfrac{d\mathbf{p}}{dt}$→Impulse→Third law→Momentum conservation→Free-body diagrams→Pseudo force→$f_s\le\mu_sN$→$F_c=\tfrac{mv^2}{r}$
🎯 By the end of this chapter you can…
  • state Newton's three laws, explain inertia and inertial frames, and use $\mathbf{F}=\dfrac{d\mathbf{p}}{dt}$ and $\mathbf{F}=m\mathbf{a}$ in vector and component form;
  • use impulse $\mathbf{J}=\Delta\mathbf{p}$ and the area under a force–time graph for bat-and-ball, catching and machine-gun problems;
  • identify action–reaction pairs and use conservation of linear momentum for recoil and explosions;
  • find unknown forces for a particle in equilibrium under concurrent forces, by components or by Lami's theorem;
  • draw free-body diagrams and solve problems on blocks in contact, the Atwood machine, table pulleys and movable pulleys with constraint relations;
  • find the apparent weight in a lift and use the pseudo force $-m\mathbf{a}_0$ in an accelerating frame;
  • decide whether friction is static or kinetic, use $f_s\le\mu_sN$, $f_k=\mu_kN$ and the angle of repose, and solve rough inclines and stacked blocks;
  • find the speed limits for a vehicle on a level or banked curve and analyse a conical pendulum and the top and bottom of a vertical circle;
  • solve JEE Main MCQ and numerical-answer problems on the laws of motion.

A $4\ \text{kg}$ block rests on a rough table ($\mu_s=0.5$, $\mu_k=0.4$). A string from it runs over a light pulley at the edge to a hanging mass of $1.5\ \text{kg}$. What friction force does the table exert on the block?

Set the hanging mass to $1.5\ \text{kg}$. The pull of the string is $m_2g=14.7\ \text{N}$, less than the limit $\mu_sN=0.5\times4\times9.8=19.6\ \text{N}$, so the block stays at rest and the readout shows static friction $14.7\ \text{N}$ — exactly what is needed to balance the tension, no more (Section 3.3). Now try $3\ \text{kg}$: the pull $29.4\ \text{N}$ beats $19.6\ \text{N}$, friction drops to the kinetic value $15.68\ \text{N}$, and the readouts show $a=1.96\ \text{m/s}^2$ and $T=23.52\ \text{N}$ — less than $m_2g$, because the hanging mass is accelerating downwards (Section 3.2).
Teaser — A Block, a String and a Rough Table

A $4\ \text{kg}$ block on a rough table ($\mu_s=0.5$, $\mu_k=0.4$, $g=9.8\ \text{m/s}^2$) is tied by a light string, over a light frictionless pulley, to a hanging mass $m_2$. The arrows are the free-body diagrams of the two bodies, drawn to scale: tension (blue), friction (red), weight (purple), normal force (green). Choose $m_2$ and press Play.

1.5 kg
friction on the block—
acceleration $a$—
tension $T$—

Sections in this chapter

🎯 Chapter mixed test JEE Main · MCQJEE Main · Numerical

Eight problems drawn from all four sections and shuffled, as in the real paper; several need two sections at once. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette. Start every problem with a free-body diagram.

E1. JEE Main · MCQ A $0.5\ \text{kg}$ ball at rest on a smooth floor is struck by a horizontal force that rises uniformly from $0$ to $40\ \text{N}$ in $0.05\ \text{s}$ and then falls uniformly to $0$ at $t=0.10\ \text{s}$. The speed of the ball afterwards is (A) $2\ \text{m/s}$ (B) $4\ \text{m/s}$ (C) $8\ \text{m/s}$ (D) $0.4\ \text{m/s}$

Impulse $J$ is the area under the force–time graph (Definition 3.3), a triangle: $J=\tfrac12(0.10)(40)=2.0\ \text{N s}$.
Momentum $J=\Delta p=mv-0$ (Result 3.3), so $v=\dfrac{2.0}{0.5}$.
Answer (B) $4\ \text{m/s}$.
⏱ Shortcut (C) uses the peak force for the whole $0.10\ \text{s}$ instead of the average force $20\ \text{N}$.

E2. JEE Main · Numerical A $5\ \text{kg}$ block is held against a vertical wall of a lift by a horizontal force $F$. The coefficient of static friction between block and wall is $0.5$, and the lift is accelerating upwards at $2\ \text{m/s}^2$. Taking $g=10\ \text{m/s}^2$, find the least $F$ (in N) that keeps the block from sliding down the wall. Give the answer to the nearest integer.

Free-body diagram Horizontally $N=F$. Vertically, in the ground frame the block must accelerate upwards with the lift: $f-mg=ma$, so $f=m(g+a)=5\times12=60\ \text{N}$ (the same as Result 3.9 for a scale in a lift).
Friction limit Static friction can supply at most $\mu_sN=0.5F$ (Law 3.11), so $0.5F\ge60$.
Answer $F_{\min}=120\ \text{N}$, i.e. $120$.
⏱ Shortcut In the lift frame the block simply "weighs" $m(g+a)$: $F_{\min}=\dfrac{m(g+a)}{\mu_s}$. Using $g$ alone gives $100$ — the lift's acceleration is the point of the question.

E3. JEE Main · MCQ A car of mass $1000\ \text{kg}$ passes the lowest point of a dip in the road, a vertical arc of radius $20\ \text{m}$, at $10\ \text{m/s}$. Taking $g=10\ \text{m/s}^2$, the normal force of the road on the car there is (A) $5000\ \text{N}$ (B) $10\,000\ \text{N}$ (C) $15\,000\ \text{N}$ (D) $20\,000\ \text{N}$

Radial equation The centre of the arc is above the car, so the net upward force is the centripetal force (Result 3.15): $N-mg=\dfrac{mv^2}{r}$.
Numbers $N=1000\left(10+\dfrac{100}{20}\right)=1000\times15$.
Answer (C) $15\,000\ \text{N}$.
⏱ Shortcut In a dip $N=m\left(g+\tfrac{v^2}{r}\right)$; over a hump $N=m\left(g-\tfrac{v^2}{r}\right)$ — like a lift accelerating up or down. (A) is the hump answer.

E4. JEE Main · Numerical A rifle of mass $4\ \text{kg}$ fires a $20\ \text{g}$ bullet horizontally at $400\ \text{m/s}$. The shooter's shoulder brings the recoiling rifle to rest in $0.05\ \text{s}$. Find the average force (in N) on the shoulder. Give the answer to the nearest integer.

Recoil Momentum of rifle + bullet is zero before and after firing (Result 3.5): $4V=0.020\times400$, so $V=2\ \text{m/s}$.
Stopping The shoulder removes the rifle's momentum $4\times2=8\ \text{N s}$ in $0.05\ \text{s}$: $F_\text{av}=\dfrac{\Delta p}{\Delta t}=\dfrac{8}{0.05}$.
Answer $160\ \text{N}$, i.e. $160$.
⏱ Shortcut The rifle's momentum equals the bullet's, $0.02\times400=8\ \text{N s}$; you never need $V$.

E5. JEE Main · MCQ A $6\ \text{kg}$ lamp hangs at rest from two light strings fixed to a horizontal ceiling; one string makes $30^\circ$ and the other $60^\circ$ with the ceiling. Taking $g=10\ \text{m/s}^2$, the tensions in the strings at $30^\circ$ and at $60^\circ$ to the ceiling are respectively (A) $30\ \text{N}$ and $30\sqrt3\ \text{N}$ (B) $30\sqrt3\ \text{N}$ and $30\ \text{N}$ (C) $60\ \text{N}$ and $60\ \text{N}$ (D) $30\ \text{N}$ and $30\ \text{N}$

Equilibrium Horizontal: $T_1\cos30^\circ=T_2\cos60^\circ$, so $T_2=\sqrt3\,T_1$. Vertical: $T_1\sin30^\circ+T_2\sin60^\circ=60$ (Result 3.6).
Solve $\tfrac12T_1+\tfrac32T_1=60$, so $T_1=30\ \text{N}$ and $T_2=30\sqrt3\ \text{N}\approx52\ \text{N}$.
Answer (A).
⏱ Shortcut The strings are at right angles, so the weight resolves along them: the steeper string (at $60^\circ$ to the ceiling) carries $mg\sin60^\circ$, the shallower one $mg\sin30^\circ$. The steeper string always carries more.

E6. JEE Main · Numerical A block is projected up a rough incline of $37^\circ$ with a speed of $10\ \text{m/s}$. The coefficient of kinetic friction is $0.5$. Taking $g=10\ \text{m/s}^2$ and $\sin37^\circ=0.6$, find the distance (in m) it travels up the incline before it stops. Give the answer to the nearest integer.

Forces along the slope Moving up, both the weight component and kinetic friction act down the slope (Result 3.13): retardation $=g(\sin37^\circ+\mu_k\cos37^\circ)=10(0.6+0.5\times0.8)=10\ \text{m/s}^2$.
Kinematics $0=10^2-2(10)s$ (Theorem 2.2).
Answer $s=5\ \text{m}$, i.e. $5$.
⏱ Shortcut Friction always opposes the sliding: up the slope it adds to $g\sin\theta$; coming back down it would subtract, giving $2\ \text{m/s}^2$.

E7. JEE Main · MCQ A curve of radius $20\ \text{m}$ is banked at $37^\circ$ ($\tan37^\circ=0.75$), and the coefficient of static friction between tyres and road is $0.5$. Taking $g=10\ \text{m/s}^2$, the greatest speed at which a car can take the curve without skidding is (A) $10\sqrt3\ \text{m/s}$ (B) $10\sqrt2\ \text{m/s}$ (C) $10\ \text{m/s}$ (D) $20\ \text{m/s}$

Formula At top speed friction acts down the slope (Result 3.17): $v_{\max}^2=rg\,\dfrac{\tan\theta+\mu_s}{1-\mu_s\tan\theta}$.
Numbers $v_{\max}^2=200\times\dfrac{0.75+0.5}{1-0.375}=200\times\dfrac{1.25}{0.625}=400$.
Answer (D) $20\ \text{m/s}$.
⏱ Shortcut $\dfrac{\tan\theta+\mu}{1-\mu\tan\theta}=\tan(\theta+\lambda)$ with $\tan\lambda=\mu$. (C) is the limit on a level road, $\sqrt{\mu_srg}=10\ \text{m/s}$; banking raises it, and even the no-friction speed $\sqrt{rg\tan\theta}\approx12.2\ \text{m/s}$ is higher.

E8. JEE Main · Numerical Masses of $5\ \text{kg}$ and $3\ \text{kg}$ hang at the ends of a light inextensible string passing over a light frictionless pulley, which is held by a clamp. Taking $g=10\ \text{m/s}^2$, find the force (in N) exerted by the clamp on the pulley while the masses move. Give the answer to the nearest integer.

Tension Atwood machine (Result 3.8): $T=\dfrac{2m_1m_2g}{m_1+m_2}=\dfrac{2\times5\times3\times10}{8}=37.5\ \text{N}$.
Pulley Both sides of the string pull the light pulley down with $T$, so the clamp must pull up with $2T$.
Answer $2T=75\ \text{N}$, i.e. $75$.
⏱ Shortcut The clamp force is less than the total weight $80\ \text{N}$ because the centre of mass of the system accelerates downwards. Answering $80$ treats the system as if it were at rest.
✅ Before you start
You will use the equations of uniformly accelerated motion (Section 2.1) in almost every problem, and the area under a graph (Section 2.1) for impulse. Forces are vectors: you need vector addition and, above all, resolving a vector into components along chosen axes (Section 2.2), and motion in a plane with constant acceleration (Section 2.3). Section 3.4 is built on centripetal acceleration $a_c=v^2/r=\omega^2r$ (Section 2.4). Keep the dimension check of Section 1.2 handy for every formula you derive. From mathematics: $\sin$, $\cos$, $\tan$ of standard angles and solving two or three simultaneous linear equations.