16.4 Wavefronts, Huygens' Principle and Interference
Treat light as a wave and two ideas take over: every point of a wavefront acts as a new source (Huygens), and two coherent waves add with a phase difference that decides the brightness. Together they explain refraction, the bright and dark fringes of Young's double slit, the fringe width $\beta=\lambda D/d$, and how a thin sheet or a liquid moves and squeezes the pattern.
Shine a laser pointer through two scratches a fraction of a millimetre apart on a blackened glass slide, and the wall does not show two bright lines. It shows a long row of evenly spaced bright and dark bands. Adding a second opening has made some places on the wall darker than they were with one opening alone — light added to light has given darkness. No stream of particles can do that; waves can. When Thomas Young showed this effect around 1801, he settled a century-old argument: light is a wave, and its wavelength could now be measured with a ruler.
In this section we build the wave picture of light from the ground up. We describe a wave by its wavefronts and use Huygens' principle to rederive the laws of reflection and refraction. Then we ask when two light waves can interfere in a steady pattern (they must be coherent), work out how their intensities combine, and apply everything to Young's double-slit experiment: the positions of the fringes, the fringe width, the intensity across the screen, and what happens when a thin transparent sheet covers one slit or the whole apparatus is put under water. These are among the most frequently examined ideas in the optics unit of JEE Main.
Wavefronts and Huygens' principle
Drop a stone into a still pond. Circular ripples spread out, and every point on one ripple crest was disturbed at the same moment and is moving in step with every other point on that crest. A light wave spreading from a small lamp is the same in three dimensions, with the oscillating electric field in place of the water surface. Surfaces joining points that oscillate in step are the natural way to describe how the wave travels.
A wavefront is a surface on which every point of the wave has the same phase at a given instant. The wavefront moves outward with the wave speed $v$, and the direction of travel of the energy — the ray — is everywhere perpendicular to the wavefront (in an isotropic medium).
- A point source gives spherical wavefronts; the rays are radial lines.
- A line source (a long narrow lit slit) gives cylindrical wavefronts.
- Far from any source a small part of a sphere is practically flat: a plane wavefront, with parallel rays. Light from the Sun or a distant star, and light from a point source at the focus of a convex lens, arrives as plane wavefronts.
Two wavefronts one wavelength apart differ in phase by $2\pi$. More generally, two points on the same ray separated by a distance $\Delta x$ differ in phase by
$$\Delta\phi=\frac{2\pi}{\lambda}\,\Delta x ,$$where $\lambda$ is the wavelength in the medium the light is travelling through. This one relation, which converts a path difference into a phase difference, is the key to everything about interference later in this section.
How does a wavefront move forward? In 1678 Christiaan Huygens proposed a geometrical rule that answers this without any detailed theory of what is vibrating.
- Every point on a wavefront acts as a source of secondary wavelets, which spread out in the forward direction with the speed of the wave in that medium.
- After a time $t$, the new position of the wavefront is the surface that touches all these wavelets in the forward direction — their forward envelope.
Each wavelet has radius $vt$. The backward-travelling part of the wavelets is ignored (a fuller theory shows that its amplitude is zero).
For a plane wavefront in a uniform medium the wavelets all have the same radius $vt$, so their envelope is a parallel plane a distance $vt$ ahead; for a spherical wavefront of radius $R$ the envelope is a sphere of radius $R+vt$. Nothing new so far — but at a boundary between two media the wavelets on the two sides grow at different speeds, and the construction then gives the laws of reflection and refraction.
Reflection. A plane wavefront $AB$ approaches a plane mirror at angle of incidence $i$ (the angle between the wavefront and the mirror equals the angle between the ray and the normal). End $A$ touches the mirror first. In the time $t$ that end $B$ takes to travel $BC=vt$ to the mirror, the wavelet from $A$ grows to radius $AE=vt$, back in the same medium. The reflected wavefront is the tangent $CE$ from $C$ to this wavelet. Triangles $ABC$ and $CEA$ are right-angled (at $B$ and $E$), share the hypotenuse $AC$ and have $BC=AE$, so they are congruent and the angle the reflected wavefront makes with the mirror equals the angle the incident one made: the angle of reflection equals the angle of incidence. The incident and reflected rays and the normal lie in one plane — the plane of the figure.
Refraction. Now let the boundary separate medium 1 (speed $v_1$) from medium 2 (speed $v_2$). While $B$ travels $BC=v_1t$ in medium 1, the wavelet from $A$ grows to radius $AE=v_2t$ in medium 2. The refracted wavefront is the tangent $CE$, and the refracted ray $AE$ makes angle $r$ with the normal. In the right-angled triangles $ABC$ and $AEC$:
$$\sin i=\frac{BC}{AC}=\frac{v_1t}{AC},\qquad \sin r=\frac{AE}{AC}=\frac{v_2t}{AC}\qquad\Rightarrow\qquad \frac{\sin i}{\sin r}=\frac{v_1}{v_2}.$$When light passes from medium 1 into medium 2,
$$\frac{\sin i}{\sin r}=\frac{v_1}{v_2}=\frac{n_2}{n_1}=\frac{\lambda_1}{\lambda_2},$$where the refractive index of a medium is $n=c/v$. The frequency does not change at the boundary (the field on both sides must oscillate together), so the wavelength scales with the speed: in a medium of index $n$, $\ v=\dfrac cn$ and $\lambda=\dfrac{\lambda_0}{n}$, where $\lambda_0$ is the wavelength in vacuum. Light slows down and bends towards the normal on entering a denser medium ($n_2\gt n_1$).
This was a real test of the wave theory. The particle (corpuscular) model explained refraction towards the normal only by assuming light speeds up in glass and water; the wave model needs it to slow down. When Foucault measured the speed of light in water in 1850 and found it smaller than in air, the wave picture won.
Optical path. In a length $L$ of a medium of index $n$, light takes time $L/v=nL/c$ — the same time it would take to cover a length $nL$ in vacuum. The product $nL$ is called the optical path. It also fits $nL/\lambda_0=L/\lambda$ wavelengths, so the phase change along a path is $\dfrac{2\pi}{\lambda_0}\times(\text{optical path})$. Comparing two routes by their optical paths, with the vacuum wavelength, is the safe way to handle interference when glass sheets or liquids are involved.
A beam of red light passes from air into water. Which of these is the same in the water as in the air?
Coherent sources and the superposition of light waves
When two light waves arrive at the same point, the principle of superposition applies: the resultant electric field is the sum of the two fields. Let the two waves at a point be $E_1=a_1\sin\omega t$ and $E_2=a_2\sin(\omega t+\phi)$, with the same angular frequency $\omega$ and a phase difference $\phi$. Adding them (as two vectors of lengths $a_1$ and $a_2$ at angle $\phi$ — the same algebra as adding two SHMs) gives a single oscillation $E=A\sin(\omega t+\alpha)$ with
$$A^2=a_1^2+a_2^2+2a_1a_2\cos\phi .$$The intensity of light (power per unit area) is proportional to the square of the amplitude, $I\propto A^2$. Writing $I_1\propto a_1^2$ and $I_2\propto a_2^2$ gives the central result of interference.
Two waves of the same frequency, with intensities $I_1$ and $I_2$ and a phase difference $\phi$ at a point, produce there the intensity
$$I=I_1+I_2+2\sqrt{I_1I_2}\,\cos\phi .$$- Constructive interference (bright): $\phi=0,\ 2\pi,\ 4\pi,\dots$, i.e. path difference $\Delta x=0,\ \lambda,\ 2\lambda,\dots$: $\ I_\text{max}=\left(\sqrt{I_1}+\sqrt{I_2}\right)^2$.
- Destructive interference (dark): $\phi=\pi,\ 3\pi,\dots$, i.e. $\Delta x=\tfrac{\lambda}{2},\ \tfrac{3\lambda}{2},\dots$: $\ I_\text{min}=\left(\sqrt{I_1}-\sqrt{I_2}\right)^2$.
- For equal intensities $I_1=I_2=I_0$: $\ I=4I_0\cos^2\dfrac{\phi}{2}$, ranging from $4I_0$ (bright) to $0$ (completely dark).
Phase and path differences are linked by $\phi=\dfrac{2\pi}{\lambda}\Delta x$ (or $\dfrac{2\pi}{\lambda_0}\times$ optical path difference).
If the amplitude ratio is $a_1/a_2=r$, then $\dfrac{I_\text{max}}{I_\text{min}}=\left(\dfrac{r+1}{r-1}\right)^2$. Equal amplitudes give the best contrast — perfectly dark minima. Notice also that the bright places get more than $I_1+I_2$ and the dark places less: interference does not create or destroy energy, it only redistributes it. Averaged over many fringes, $\cos\phi$ averages to zero and the mean intensity is exactly $I_1+I_2$.
Why two torches never show fringes. An ordinary source emits light in short, independent bursts from countless atoms, each lasting about $10^{-8}\ \text{s}$ or less. Two separate lamps therefore have a phase difference that jumps randomly millions of times a second. The term $2\sqrt{I_1I_2}\cos\phi$ then averages to zero during any observation, and we simply see $I=I_1+I_2$ everywhere: the intensities add. A steady pattern needs the phase difference at each point to stay fixed in time.
Two sources are coherent if they emit waves of the same frequency with a constant phase difference (which may be zero). Waves from coherent sources produce a stationary interference pattern, in which the intensities combine according to Law 16.21. Waves from incoherent sources have a randomly changing phase difference; their intensities simply add, $I=I_1+I_2$.
In practice two coherent sources are made from one source, so that any random jump in phase happens in both copies at once and cancels from their phase difference. There are two ways to do it:
- Division of wavefront — two different parts of the same wavefront are allowed through two openings, as in Young's double slit below.
- Division of amplitude — a partly reflecting surface splits one wave into a reflected and a transmitted part, as in the colours of soap films and oil layers.
A laser emits light whose phase stays regular over long stretches, so a laser beam is a highly coherent source and makes interference easy to see.
- Coherent sources — derived from a single source, so the phase difference stays constant. This is essential: without it there are no fringes at all.
- Same frequency (monochromatic light, or one colour at a time); otherwise the phase difference drifts.
- Nearly equal amplitudes, so that the minima are dark and the fringes have good contrast ($I_\text{min}=0$ when $a_1=a_2$).
- Narrow sources, close together, and a distant screen, so that the fringes are sharp and wide enough to see (fringe width $\propto1/d$).
- The two waves should travel nearly the same direction and have the same state of polarisation.
Two identical sodium lamps are placed side by side and shine on a white wall. No interference fringes are seen because
Young's double-slit experiment
In Young's arrangement, monochromatic light from a narrow slit $S$ falls on two parallel narrow slits $S_1$ and $S_2$, a small distance $d$ apart and equidistant from $S$. The two slits are lit by the same wavefront, so they act as two coherent sources in phase. The light from them overlaps on a screen at a distance $D$ from the slits, with $D\gg d$ (typically $D\sim1\ \text{m}$ and $d\sim0.1$–$1\ \text{mm}$). Let $O$ be the point of the screen on the perpendicular bisector of $S_1S_2$, and $P$ a point a distance $y$ from $O$.
Path difference. Using Pythagoras for the two paths to $P$,
$$S_2P^2-S_1P^2=\left[D^2+\left(y+\tfrac d2\right)^2\right]-\left[D^2+\left(y-\tfrac d2\right)^2\right]=2yd .$$So $S_2P-S_1P=\dfrac{2yd}{S_2P+S_1P}$. For $y$ and $d$ much smaller than $D$, $S_2P+S_1P\approx2D$, and the path difference is
$$\Delta x=S_2P-S_1P=\frac{yd}{D}=d\sin\theta\approx d\,\theta ,$$where $\theta$ is the angle that $OP$ subtends at the midpoint of the slits.
For two coherent in-phase slits a distance $d$ apart, a screen a distance $D$ away ($D\gg d$) and light of wavelength $\lambda$:
- bright fringes ($\Delta x=n\lambda$) at $\ y_n=\dfrac{n\lambda D}{d}$, $\ n=0,\pm1,\pm2,\dots$ — the central fringe ($n=0$) at $O$ is bright;
- dark fringes ($\Delta x=(2n-1)\tfrac{\lambda}{2}$) at $\ y'_n=\dfrac{(2n-1)\lambda D}{2d}$, $\ n=1,2,3,\dots$ on each side;
- the fringe width (distance between consecutive bright, or consecutive dark, fringes) is $$\beta=\frac{\lambda D}{d},$$ the same for all fringes, and the angular fringe width is $\ \beta/D=\lambda/d$.
Combining the path difference with Law 16.21 for two equal waves (each of intensity $I_0$) gives the whole intensity pattern:
Bright and dark fringes have equal widths, and in the ideal experiment all the bright fringes are equally bright. (In reality each slit has a finite width, and diffraction at each slit makes the fringes fade gradually away from the centre — see §16.5.)
What the formula $\beta=\lambda D/d$ tells you:
- $\beta\propto\lambda$: red fringes are wider than blue ones. With white light the central fringe is white (zero path difference for every colour), the fringes on either side are coloured — violet edge nearest the centre, red farthest — and after a few fringes the colours overlap into uniform white.
- $\beta\propto D$ and $\beta\propto1/d$: move the screen back or bring the slits closer to widen the fringes. With $d$ much larger than about $1\ \text{mm}$ the fringes become too fine to see.
- If the whole apparatus is immersed in a liquid of refractive index $n$, the wavelength becomes $\lambda/n$ and $\beta'=\dfrac{\beta}{n}$: the fringes crowd together.
- Moving the source slit $S$ sideways shifts the whole pattern the opposite way (the central fringe stays where the total path from $S$ is equal); widening $S$ too much smears the fringes out.
- Measuring $\beta$, $d$ and $D$ gives the wavelength: $\lambda=\beta d/D$. This is how Young first measured the wavelength of light.
In Interactive 1 start from $\lambda=600\ \text{nm}$, $d=0.30\ \text{mm}$, $D=1.5\ \text{m}$ in air (fringe width $3.00\ \text{mm}$). Predict the fringe width after you change the slit separation to $d=0.60\ \text{mm}$ and the screen distance to $D=2.0\ \text{m}$.
In a Young's double-slit experiment the fringe width is $\beta$. The wavelength is increased by $20\%$ and the slit separation is doubled, with the screen unchanged. The new fringe width is
A thin sheet over one slit, and a liquid
Cover slit $S_1$ with a thin transparent sheet (mica, glass or plastic film) of thickness $t$ and refractive index $n$. Light from $S_1$ now crosses a thickness $t$ of the sheet instead of $t$ of air, so its optical path is longer by
$$\Delta=(n-1)\,t .$$At a point $P$ at height $y$ the optical path difference between the two waves becomes $\dfrac{yd}{D}-(n-1)t$ (measured as path via $S_2$ minus path via $S_1$). The central fringe — zero optical path difference — is no longer at $O$ but where $\dfrac{y_0d}{D}=(n-1)t$, i.e. on the side of the covered slit: there the geometric path via $S_1$ is shorter, which makes up for the delay in the sheet. Every other fringe moves with it by the same amount, because the extra term is the same for every point.
A thin transparent sheet of thickness $t$ and refractive index $n$ placed over one slit of a Young's double slit (in air) shifts the whole fringe pattern towards the covered slit by
$$y_0=\frac{(n-1)\,t\,D}{d}=\frac{(n-1)\,t}{\lambda}\,\beta ,$$i.e. by $N=\dfrac{(n-1)t}{\lambda}$ fringes. The fringe width does not change. If the experiment is done in a medium of index $n_\text{m}$, replace $(n-1)$ by $(n-n_\text{m})$ and use the wavelength in the medium: $y_0=\dfrac{(n-n_\text{m})\,t\,D}{n_\text{m}\,d}$.
This is a sensitive way to measure the thickness or refractive index of a thin film: with white light, find the new position of the white central fringe and count how many fringes it has moved. Notice also what happens at $O$: the waves arrive there with phase difference $\phi=\dfrac{2\pi}{\lambda}(n-1)t$, so $O$ is bright when $(n-1)t$ is a whole number of wavelengths and dark when it is an odd number of half-wavelengths. The least thickness that makes $O$ dark is $t=\dfrac{\lambda}{2(n-1)}$.
Liquid between the slits and the screen. Filling the space with a liquid of index $n$ changes every path into $n$ times its length, so all fringes come closer: $\beta'=\beta/n$. The central fringe stays at $O$ (the two paths are still equal there). This gives a neat method of measuring the refractive index of a liquid: $n=\beta_\text{air}/\beta_\text{liquid}$.
In Interactive 2 (light of $600\ \text{nm}$, $d=0.25\ \text{mm}$, $D=1.0\ \text{m}$, in air) set the sheet's index to $1.6$ and increase its thickness from $0$ to $3.0\ \mu\text{m}$. What happens to the pattern?
1. Intensity ratios need square roots. $I_\text{max}/I_\text{min}=\left(\dfrac{\sqrt{I_1}+\sqrt{I_2}}{\sqrt{I_1}-\sqrt{I_2}}\right)^2$. Intensities $9:1$ give amplitudes $3:1$ and $I_\text{max}/I_\text{min}=4$, not $(10/8)^2$.
2. Counting dark fringes. The first dark fringe is at $\beta/2$, the $n$th at $(n-\tfrac12)\beta$. Bright and dark fringes on opposite sides of the centre: add their distances.
3. In a liquid the fringes shrink. $\beta'=\beta/n$ because the wavelength becomes $\lambda/n$; the frequency is unchanged. Don't multiply by $n$.
4. The thin sheet. The extra path is $(n-1)t$, not $nt$; the pattern moves towards the covered slit; the fringe width stays the same. In a liquid use $(n-n_\text{m})t$.
5. Incoherent sources. Two independent lamps (or two halves of a lamp filament) give $I=I_1+I_2$ — no fringes, no factor $4$. And $d$ is the separation of the slit centres, not the width of a slit.
In a Young's double-slit experiment with light of wavelength $\lambda$, a thin glass plate of refractive index $1.5$ covering the lower slit shifts the pattern by $6$ fringes. The thickness of the plate is
Exercises
Take $c=3.0\times10^8\ \text{m/s}$ and the refractive index of air as $1$ unless told otherwise. In Young's experiment $d$ is the slit separation and $D$ the slit-to-screen distance.
- 1 Name the shape of the wavefront in each case: (a) a short distance from a small bulb; (b) light from a distant star reaching the Earth; (c) light from a long, narrow illuminated slit; (d) light leaving a convex lens when a point source is at its focus.
- 2 Yellow light of wavelength $589\ \text{nm}$ in air enters water ($n=1.33$). Find its speed, its wavelength and its frequency in the water.
- 3 Light falls on glass ($n=1.5$) at $45^\circ$. Find the angle of refraction.
- 4 A ray in glass ($n=1.5$) meets a glass–water boundary ($n_\text{water}=\tfrac43$) at $30^\circ$. Find the angle of refraction in the water.
- 5 Find the optical path of $4.5\ \text{cm}$ of water ($n=\tfrac43$) and the time light takes to cross it.
- 6 Light of vacuum wavelength $600\ \text{nm}$ travels in glass ($n=1.5$). Find the phase difference, in radians, between two points $0.15\ \mu\text{m}$ apart along a ray.
- 7 Use Huygens' construction to explain why a wavefront entering a slower medium obliquely turns so that the ray bends towards the normal. What would the construction predict if light travelled faster in glass?
- 1 Two coherent waves of amplitudes $3$ and $4$ units meet. Find the resultant amplitude when the phase difference is (a) $0$, (b) $\pi$, (c) $\pi/2$.
- 2 The intensities of two coherent sources are in the ratio $25:9$. Find $I_\text{max}/I_\text{min}$ in their interference pattern.
- 3 In an interference pattern $I_\text{max}/I_\text{min}=49$. Find the ratio of the amplitudes and of the intensities of the two waves.
- 4 Two coherent waves, each of intensity $I_0$, meet with a path difference of $\lambda/3$. Find the resultant intensity in terms of $I_0$.
- 5 Repeat part 4 for a path difference of $\lambda/4$.
- 6 Explain why the light from the two headlamps of a car never produces interference fringes on a wall.
- 7 Coherent waves of intensities $I$ and $9I$ meet with a phase difference of $60^\circ$. Find the resultant intensity.
- 8 For the waves of part 7, find $I_\text{max}$, $I_\text{min}$ and the average intensity over many fringes, and show that energy is conserved.
- 1 Light of wavelength $500\ \text{nm}$ falls on slits $0.20\ \text{mm}$ apart; the screen is $1.2\ \text{m}$ away. Find the fringe width.
- 2 For part 1, find the distances of the fourth bright fringe and of the third dark fringe from the centre.
- 3 Fringes $2.0\ \text{mm}$ wide are obtained with slits $0.30\ \text{mm}$ apart and a screen $1.0\ \text{m}$ away. Find the wavelength.
- 4 The angular fringe width for light of $600\ \text{nm}$ is $0.20^\circ$. Find the slit separation in mm.
- 5 The screen distance is doubled and the slit separation is halved. By what factor does the fringe width change?
- 6 For part 1, find the distance between the second bright fringe on one side of the centre and the fifth dark fringe on the other side.
- 7 Describe the pattern when white light is used. Why are only a few coloured fringes seen?
- 8 In a fixed field of view, $24$ fringes are seen with light of $500\ \text{nm}$. How many are seen with light of $600\ \text{nm}$?
- 9 The fringe width is $3.0\ \text{mm}$ and the intensity of the central fringe is $I_\text{max}$. Find the intensity at $0.50\ \text{mm}$ from the centre, as a fraction of $I_\text{max}$.
- 1 The fringe width in air is $2.4\ \text{mm}$. Find it when the whole apparatus is immersed in water ($n=\tfrac43$).
- 2 A glass sheet ($n=1.5$) $6.0\ \mu\text{m}$ thick covers one slit; $\lambda=600\ \text{nm}$ and the fringe width is $2.0\ \text{mm}$. Find the number of fringes by which the pattern shifts, and the shift in mm.
- 3 Find the least thickness of a sheet of index $1.5$ which, placed over one slit, makes the centre of the screen dark for light of $500\ \text{nm}$.
- 4 A film $9.6\ \mu\text{m}$ thick over one slit moves the central bright fringe to the position previously occupied by the eighth bright fringe ($\lambda=600\ \text{nm}$). Find the refractive index of the film.
- 5 Sheets of the same thickness $6.0\ \mu\text{m}$ but indices $1.6$ (over $S_1$) and $1.4$ (over $S_2$) cover the two slits; $\lambda=600\ \text{nm}$. By how many fringes, and towards which slit, does the pattern move?
- 6 The fringe width is $1.50\ \text{mm}$ in air and $1.20\ \text{mm}$ when the space between the slits and the screen is filled with a liquid. Find the refractive index of the liquid.
- 7 The source slit $S$, $20\ \text{cm}$ behind the double slit, is moved $1.0\ \text{mm}$ upward ($D=1.0\ \text{m}$). Where does the central fringe go?
- 8 With equal slits, the intensity at the centre of the screen is $I_\text{max}$. A film of index $1.5$ and thickness $0.20\ \mu\text{m}$ is placed over one slit ($\lambda=600\ \text{nm}$). Find the new intensity at the centre, as a fraction of $I_\text{max}$.
E1. JEE Main · MCQ In a Young's double-slit experiment in air the fringe width is $0.80\ \text{mm}$. The whole apparatus is immersed in a liquid of refractive index $1.6$ and the slit separation is halved. The new fringe width is (A) $0.64\ \text{mm}$ (B) $0.25\ \text{mm}$ (C) $1.0\ \text{mm}$ (D) $2.56\ \text{mm}$
E2. JEE Main · Numerical In the interference pattern of two coherent sources the ratio of maximum to minimum intensity is $25:9$. The ratio of the intensities of the two sources is $x:1$. Find $x$ to the nearest integer.
E3. JEE Main · MCQ When a thin transparent film of refractive index $1.5$ is placed over one slit of a Young's double slit lit by light of wavelength $500\ \text{nm}$, the central bright fringe moves to the position of the seventh bright fringe. The thickness of the film is (A) $7.0\ \mu\text{m}$ (B) $3.5\ \mu\text{m}$ (C) $2.3\ \mu\text{m}$ (D) $10.5\ \mu\text{m}$
E4. JEE Main · Numerical A Young's double slit with slit separation $0.50\ \text{mm}$ and screen distance $1.0\ \text{m}$ is lit by a mixture of light of wavelengths $500\ \text{nm}$ and $600\ \text{nm}$. Find the least distance from the central maximum, in mm, at which bright fringes of the two wavelengths coincide. Give the answer to the nearest integer.
E5. JEE Main · Numerical In a Young's double-slit experiment with two identical slits the fringe width is $6.0\ \text{mm}$ and the intensity at the central maximum is $100$ units. Find the intensity, in the same units, at a point $1.0\ \text{mm}$ from the central maximum. Give the answer to the nearest integer.
E6. JEE Main · MCQ A plane wavefront passes from medium 1 into medium 2. The angle of incidence is $45^\circ$ and the angle of refraction is $30^\circ$. The ratio of the wavelength in medium 1 to that in medium 2 is (A) $1/\sqrt2$ (B) $\sqrt3/\sqrt2$ (C) $1$ (D) $\sqrt2$
Research question. How accurately can you measure the wavelength of a laser pointer with a home-made double slit, a wall and a tape measure?
Why it matters. Interference turns lengths far too small to see into lengths you can measure with a ruler. The same principle, refined, is used in interferometers that check the flatness of telescope mirrors to a few nanometres, in the fibre-optic sensors that monitor strain in bridges and aircraft wings, and in the kilometre-long detectors in the USA, Italy, Japan and (soon) India that sense gravitational waves by measuring changes in length far smaller than an atomic nucleus.
What to do.
- Coat a microscope slide with soot from a candle (or use the dark part of an exposed photographic film). Holding two razor blades taped together, scratch two parallel lines; the blade thickness sets $d$ (about $0.1$–$0.2\ \text{mm}$).
- Measure $d$: project the slits' shadow, or view them through a magnifier against a fine scale; repeat and average.
- In a dark room, shine a red laser pointer through the slits onto a wall $2$–$4\ \text{m}$ away. Never look into the beam or its reflection. Measure $D$.
- Mark the centres of as many bright fringes as you can see and measure the distance spanned by $10$ or more fringe widths; divide to get $\beta$.
- Compute $\lambda=\beta d/D$ and compare with the value printed on the pointer. Repeat for three values of $D$ and plot $\beta$ against $D$.
Tools: Laser pointer (red, and green if available), glass slide, candle or marker, two razor blades and tape, magnifying glass or travelling microscope, measuring tape, clamp or books to steady the pointer.
Hand in: A table of $D$, the measured span of fringes and $\beta$; the graph of $\beta$ against $D$ with its slope; your value of $\lambda$ with an uncertainty estimate (which measurement contributes most?); and a comparison of red and green fringe widths.
Going further. Look closely: the fringes fade in and out in groups. Measure the width of the whole bright patch — it is set by the width of each slit, not their separation (§16.5). Can you estimate the slit width from it?
🧪 Self-check quiz
Q1. Two sources of light are said to be coherent when they have
Q2. In a Young's double-slit experiment the wavelength is changed from $500\ \text{nm}$ to $600\ \text{nm}$, with everything else unchanged. The fringe width
Q3. A thin transparent sheet is placed over one slit in Young's experiment. Then
Q4. Two coherent sources have intensities in the ratio $9:1$. The ratio $I_\text{max}/I_\text{min}$ in their interference pattern is
Q5. Light from a point source placed at the focus of a convex lens emerges from the lens with wavefronts that are