18.3 Nuclei, Binding Energy, Fission and Fusion
A nucleus is a tiny, incredibly dense ball of protons and neutrons, of radius $R=R_0A^{1/3}$. It weighs less than its parts: the missing mass $\Delta M$ is the binding energy $\Delta M c^2$, and the way the binding energy per nucleon rises and falls with $A$ explains why both splitting heavy nuclei and fusing light ones release energy.
A uranium fuel pellet the size of a fingertip gives out as much heat in a reactor as about a tonne of coal. The Sun has poured out $3.8\times10^{26}$ joules every second for four and a half billion years without running down. Neither can be explained by chemistry: burning, rusting and every other chemical reaction rearranges electrons and releases a few electronvolts per atom. Nuclear reactions rearrange protons and neutrons and release millions of electronvolts per nucleus. Where does that energy come from?
The answer is one of the most surprising facts in physics: a nucleus has less mass than the protons and neutrons it is made of. The missing mass is not lost — by Einstein's relation $E=mc^2$ it is the energy that holds the nucleus together. In this section we describe what a nucleus is made of and how big it is, define atomic masses and the atomic mass unit, measure the binding energy of a nucleus from its mass defect, read the famous curve of binding energy per nucleon against mass number, and use it to explain why both fission of heavy nuclei and fusion of light ones release energy. The scattering experiment of Section 18.1 showed that the nucleus exists; now we look inside it.
Composition and size of the nucleus
A nucleus is built from two kinds of particle, together called nucleons: the proton (charge $+e$, mass $1.6726\times10^{-27}\ \text{kg}$) and the neutron (no charge, slightly heavier, $1.6749\times10^{-27}\ \text{kg}$), discovered by James Chadwick in 1932. Before the neutron was known there was a puzzle: helium has twice the charge of hydrogen but four times its mass. Two protons plus two neutrons settles it at once. The electrons of the atom are outside the nucleus; the number of electrons in a neutral atom equals the number of protons, and it is that number which fixes the chemistry of the element.
For a nucleus of element X,
- the atomic number $Z$ is the number of protons (so the nuclear charge is $Ze$);
- the neutron number $N$ is the number of neutrons;
- the mass number $A=Z+N$ is the total number of nucleons.
The nucleus (or the atom) is written ${}^{A}_{Z}\text{X}$, for example ${}^{4}_{2}\text{He}$, ${}^{56}_{26}\text{Fe}$, ${}^{235}_{\ 92}\text{U}$. Since $Z$ is fixed by the element's name, it is often dropped: ${}^{235}\text{U}$, "uranium-235". A species of nucleus with given $Z$ and $N$ is called a nuclide.
Nuclei of one element need not all have the same number of neutrons. Chlorine, for instance, is a mixture of ${}^{35}\text{Cl}$ ($18$ neutrons) and ${}^{37}\text{Cl}$ ($20$ neutrons); chemically the two are identical. Three families of related nuclides have names that JEE Main expects you to know.
- Isotopes: same $Z$, different $N$ (and so different $A$) — the same element: ${}^{1}_{1}\text{H}$, ${}^{2}_{1}\text{H}$ (deuterium), ${}^{3}_{1}\text{H}$ (tritium); ${}^{12}_{\ 6}\text{C}$, ${}^{13}_{\ 6}\text{C}$, ${}^{14}_{\ 6}\text{C}$. They have the same chemistry but different masses.
- Isobars: same $A$, different $Z$ — different elements of (almost) the same mass: ${}^{14}_{\ 6}\text{C}$ and ${}^{14}_{\ 7}\text{N}$; ${}^{3}_{1}\text{H}$ and ${}^{3}_{2}\text{He}$.
- Isotones: same $N$, different $Z$: ${}^{3}_{1}\text{H}$ and ${}^{4}_{2}\text{He}$ (both $N=2$); ${}^{14}_{\ 6}\text{C}$, ${}^{15}_{\ 7}\text{N}$ and ${}^{16}_{\ 8}\text{O}$ (all $N=8$).
Memory aid: isotopes share protons, isotones share neutrons, isobars share $A$.
Atomic masses. Nuclear and atomic masses are tiny in kilograms, so a more convenient unit is used. It is defined from the most common isotope of carbon, and atomic masses are measured very precisely by deflecting ions in electric and magnetic fields in a mass spectrometer: ions of the same charge but different mass follow paths of different radius, so the instrument separates isotopes and compares their masses with that of ${}^{12}\text{C}$.
One atomic mass unit ($1\ \text{u}$) is one-twelfth of the mass of a neutral atom of carbon-12:
$$1\ \text{u}=\frac{\text{mass of one }{}^{12}\text{C atom}}{12}=\frac{12\ \text{g}/N_A}{12}$$ $$1\ \text{u}=1.6605\times10^{-27}\ \text{kg}.$$In this unit $m_p=1.007276\ \text{u}$, $m_n=1.008665\ \text{u}$, $m_e=0.000549\ \text{u}$, and the mass of a hydrogen-1 atom is $m_\text{H}=1.007825\ \text{u}$. Tables list atomic masses (nucleus plus $Z$ electrons), not nuclear masses; the mass number $A$ is the atomic mass rounded to the nearest whole number.
The atomic mass of an element printed in the periodic table is the average over its natural isotopes, weighted by their abundances. Chlorine is $75.8\%$ ${}^{35}\text{Cl}$ ($34.969\ \text{u}$) and $24.2\%$ ${}^{37}\text{Cl}$ ($36.966\ \text{u}$), which gives $0.758\times34.969+0.242\times36.966=35.45\ \text{u}$ — the reason chlorine's atomic mass is not close to a whole number.
The size of a nucleus. In Section 18.1 the distance of closest approach gave an upper limit on the size of the gold nucleus. Fast electrons and alpha particles scattered from many different nuclei show more: the radius of a nucleus grows with its mass number in a very simple way.
A nucleus of mass number $A$ is roughly a sphere of radius
$$R=R_0A^{1/3},\qquad R_0\approx1.2\ \text{fm}=1.2\times10^{-15}\ \text{m}.$$So the volume of a nucleus, $\tfrac43\pi R^3=\tfrac43\pi R_0^3A$, is proportional to the number of nucleons, and the density of nuclear matter is the same for all nuclei, about $2.3\times10^{17}\ \text{kg/m}^3$. (One femtometre, $1\ \text{fm}=10^{-15}\ \text{m}$, is also called a fermi. The edge of a nucleus is not sharp, so $R_0$ is quoted between $1.1$ and $1.4\ \text{fm}$; JEE Main uses $1.2\ \text{fm}$ unless told otherwise.)
Why the density is constant. The mass of a nucleus is very nearly $A\times(1\ \text{u})$, so
$$\rho=\frac{A\,m_\text{u}}{\tfrac43\pi R_0^3A}=\frac{m_\text{u}}{\tfrac43\pi R_0^3}$$ $$\rho=\frac{1.66\times10^{-27}}{\tfrac43\pi(1.2\times10^{-15})^3}\approx2.3\times10^{17}\ \text{kg/m}^3,$$independent of $A$. Nucleons pack together like marbles in a bag: each takes up the same volume, however many there are. That is $2.3\times10^{14}$ times the density of water — a teaspoon of nuclear matter would weigh about a billion tonnes. Atoms, by contrast, are almost all empty space: an atomic radius ($\sim10^{-10}\ \text{m}$) is some $10^4$–$10^5$ times a nuclear radius, and atomic radii do not grow like $A^{1/3}$, because they are set by the electrons.
The radius of nucleus X is twice the radius of nucleus Y. The ratio of the density of nucleus X to that of nucleus Y is
Mass–energy relation, mass defect and binding energy
Special relativity, which Einstein published in 1905, showed that mass and energy are not separate things. A body at rest has an energy simply because it has mass, and when a system gives out energy — as light, heat or the kinetic energy of fragments — its mass goes down by a matching amount. In chemistry the change is far too small to notice (burning a kilogram of coal lowers the mass of the products by about a third of a microgram); in nuclear physics it is a large, easily measured fraction of a per cent.
A mass $m$ is equivalent to an energy
$$E=mc^2,\qquad c=3.0\times10^8\ \text{m/s}.$$Whenever a system releases energy $E$, its mass decreases by $\Delta m=E/c^2$; whenever energy is supplied to it, its mass increases. In any process the total energy, including the rest energy $mc^2$, is conserved. With $1\ \text{u}=1.6605\times10^{-27}\ \text{kg}$ and $1\ \text{MeV}=1.602\times10^{-13}\ \text{J}$,
$$1\ \text{u}\times c^2=931.5\ \text{MeV}$$— that is, $1\ \text{u}=931.5\ \text{MeV}/c^2$.
Check the conversion: $(1.6605\times10^{-27}\ \text{kg})$ $\times(2.998\times10^8\ \text{m/s})^2$ $=1.4924\times10^{-10}\ \text{J}$, and dividing by $1.602\times10^{-13}\ \text{J/MeV}$ gives $931.5\ \text{MeV}$. (With the rounded values $c=3\times10^8$ and $e=1.6\times10^{-19}$ you get $934$ — so in problems always use $931.5\ \text{MeV}$ per u, or $931\ \text{MeV}$ if the problem gives it.) On the same scale the electron's rest energy is $0.000549\times931.5=0.511\ \text{MeV}$ and one gram of anything is worth $9\times10^{13}\ \text{J}$, about the energy a large power station sends out in a day.
The mass defect. Add up the masses of the separate parts of a helium-4 atom and compare with what a mass spectrometer measures:
$$2m_\text{H}+2m_n=4.032980\ \text{u},$$ $$M({}^{4}\text{He})=4.002603\ \text{u}.$$The atom is lighter than its parts by $0.030377\ \text{u}$, about $0.75\%$. Nothing has been miscounted: when two protons and two neutrons come together they give out energy, and the mass of that energy has gone. To pull them apart again you would have to supply the same energy back.
The mass defect of a nucleus ${}^{A}_{Z}\text{X}$ is the amount by which its mass is less than the total mass of its separate nucleons:
$$\Delta M=\left[Zm_p+(A-Z)m_n\right]-M_\text{nucleus}.$$With atomic masses (as tables give them) use the mass of the hydrogen atom in place of the proton:
$$\Delta M=\left[Zm_\text{H}+(A-Z)m_n\right]-M_\text{atom}({}^{A}_{Z}\text{X}),$$because the $Z$ electron masses in $Zm_\text{H}$ cancel the $Z$ electron masses in $M_\text{atom}$ (the tiny electron binding energies, a few eV, are negligible).
The binding energy $E_b$ of a nucleus is the energy needed to separate it completely into its $Z$ protons and $N$ neutrons at rest far apart — equivalently, the energy released when it is assembled from them:
$$E_b=\Delta M\,c^2=\Delta M\,(\text{in u})\times931.5\ \text{MeV}.$$The binding energy per nucleon is $E_b/A$, the average energy needed to remove a nucleon. The larger $E_b/A$, the more tightly bound — the more stable — the nucleus.
The total binding energy of a big nucleus is naturally large because it has many nucleons, so total $E_b$ is no guide to stability: ${}^{238}\text{U}$ has $E_b\approx1800\ \text{MeV}$ against $492\ \text{MeV}$ for ${}^{56}\text{Fe}$, but iron is the more tightly bound ($8.79$ against $7.57\ \text{MeV}$ per nucleon). Compare nuclei by $E_b/A$.
A closely related quantity is the energy to remove just one nucleon. Removing a neutron from ${}^{A}\text{X}$ leaves ${}^{A-1}\text{X}$, so the neutron separation energy is $S_n=\left[M({}^{A-1}\text{X})+m_n-M({}^{A}\text{X})\right]c^2$, which is the same as $E_b({}^{A}\text{X})-E_b({}^{A-1}\text{X})$. It differs from nucleus to nucleus, and need not equal the average $E_b/A$.
- Read $Z$ and $A$ from the symbol; $N=A-Z$.
- Decide which masses you are given. Atomic masses → use $m_\text{H}=1.007825\ \text{u}$; nuclear masses → use $m_p=1.007276\ \text{u}$. Never mix an atomic mass with $m_p$.
- $\Delta M=Zm_\text{H}+Nm_n-M$ (keep six decimal places: $\Delta M$ is a small difference of large numbers).
- $E_b=\Delta M\times931.5\ \text{MeV}$; divide by $A$ for $E_b/A$. Convert to joules with $1\ \text{MeV}=1.6\times10^{-13}\ \text{J}$ only at the end.
- For "energy to remove one nucleon" or "to split into smaller nuclei", compare the binding energies (or masses) before and after.
In Interactive 1 choose ${}^{56}\text{Fe}$ and then ${}^{238}\text{U}$. Which statement will the readouts confirm?
Compare the mass of a ${}^{4}\text{He}$ nucleus with the total mass of two free protons and two free neutrons.
Binding energy per nucleon and the nuclear force
Work out $E_b/A$ for nuclides right across the periodic table and plot it against $A$ (Interactive 1 shows nine of them; Interactive 2 the whole curve). The result is one of the most important graphs in physics, because its shape decides which nuclear reactions can release energy.
- For light nuclei $E_b/A$ rises steeply with $A$: $1.11\ \text{MeV}$ for ${}^{2}\text{H}$, $2.83\ \text{MeV}$ for ${}^{3}\text{H}$, and then a sharp peak at ${}^{4}\text{He}$ ($7.07\ \text{MeV}$); ${}^{12}\text{C}$ ($7.68$) and ${}^{16}\text{O}$ ($7.98$) also stand above their neighbours.
- It reaches a broad maximum of about $8.8\ \text{MeV}$ near $A\approx56$–$62$ (${}^{56}\text{Fe}$ $8.79$, ${}^{62}\text{Ni}$ $8.79\ \text{MeV}$): these are the most tightly bound nuclei.
- For $30\lt A\lt170$ it is nearly constant, between about $8$ and $8.8\ \text{MeV}$.
- For heavy nuclei it falls slowly, to $7.87\ \text{MeV}$ for ${}^{208}\text{Pb}$ and $7.57\ \text{MeV}$ for ${}^{238}\text{U}$.
Consequence: energy is released whenever nucleons end up in nuclei with a larger binding energy per nucleon — by fusion of light nuclei (moving up the steep left-hand side) or by fission of heavy nuclei into middle-weight ones (moving up from the right). Nuclei near the peak can release energy neither way.
What the shape tells us about the force. The protons in a nucleus repel each other electrically, with forces of hundreds of newtons at $10^{-15}\ \text{m}$. Something much stronger must hold the nucleus together: the nuclear force (the strong force) between nucleons. The near-constant $E_b/A$ is its most revealing fingerprint. If every nucleon attracted every other one, a nucleus of $A$ nucleons would have $\tfrac12A(A-1)$ bonds and $E_b$ would grow like $A^2$ — so $E_b/A$ would grow steadily with $A$. Instead $E_b$ is roughly proportional to $A$: each nucleon interacts only with its few nearest neighbours, and once it has those, adding more nucleons elsewhere makes no difference. The force saturates, because it is short-ranged — and this is also why nuclear matter has a constant density.
The shape at both ends follows. In a light nucleus a large fraction of the nucleons are at the surface, with fewer neighbours to bind to, so $E_b/A$ is low and rises quickly as the nucleus grows. In a heavy nucleus the electric repulsion, which is long-ranged and acts between every pair of protons, grows roughly like $Z^2$ and steadily eats into the binding: $E_b/A$ falls. Beyond about $Z=83$ no nucleus is completely stable. Heavy nuclei also need more neutrons than protons ($N/Z\approx1.5$ for uranium) — the extra neutrons add nuclear attraction without adding repulsion.
- It is the strongest known force — at a separation of about $1\ \text{fm}$ roughly a hundred times stronger than the electric repulsion between two protons. It acts between all nucleons and does not act on electrons.
- It is short-ranged: strongly attractive at separations of about $0.8$–$2\ \text{fm}$, negligible beyond a few fm, and strongly repulsive below about $0.8\ \text{fm}$ (which keeps nucleons from collapsing into one another and fixes the nuclear density).
- It is charge-independent: the nuclear forces proton–proton, neutron–neutron and proton–neutron are almost the same.
- It saturates: each nucleon interacts only with its nearest neighbours, so $E_b\propto A$ and $E_b/A$ is roughly constant.
- Unlike gravity and the Coulomb force it does not follow a simple inverse-square law (it also depends on the spins of the nucleons).
Think of the potential energy of two nucleons as a function of their separation $r$: very high (repulsive core) inside $0.8\ \text{fm}$, a deep well with its minimum near $1\ \text{fm}$, and rising quickly to zero by $2$–$3\ \text{fm}$. Compare the Coulomb potential energy of two protons, $\dfrac{ke^2}{r}=\dfrac{1.44\ \text{MeV fm}}{r}$, which is only $0.5\ \text{MeV}$ at $3\ \text{fm}$ but stretches out forever. Close in, nuclear attraction wins; far out, only the Coulomb repulsion is left — and that, as we shall see, is the obstacle to fusion.
Why is energy released both when a heavy nucleus such as ${}^{235}\text{U}$ splits into two middle-sized nuclei and when two deuterons fuse into helium?
Nuclear reactions: the Q-value, fission and fusion
In a nuclear reaction a nucleus is struck by a particle (or splits by itself) and different nuclei come out, for example ${}^{14}_{\ 7}\text{N}+{}^{4}_{2}\text{He}\to{}^{17}_{\ 8}\text{O}+{}^{1}_{1}\text{H}$, Rutherford's first artificial transmutation (1919). In every reaction the total charge (the sum of the $Z$'s) and the total number of nucleons (the sum of the $A$'s) are conserved, and so are momentum and total energy. A free neutron is written ${}^{1}_{0}\text{n}$ and a proton ${}^{1}_{1}\text{p}$ or ${}^{1}_{1}\text{H}$.
For a reaction $a+X\to Y+b$, the Q-value is the energy released — the rest energy of the reactants minus the rest energy of the products:
$$Q=\left[(m_a+m_X)-(m_Y+m_b)\right]c^2 .$$If $Q\gt0$ the reaction is exothermic: rest mass is turned into kinetic energy of the products (and gamma rays). If $Q\lt0$ it is endothermic and can happen only if the incoming particle brings in at least $|Q|$ (in fact somewhat more, since momentum must also be conserved). Atomic masses may be used whenever the electrons balance on the two sides, as they do when $Z$ is conserved.
Because $Z$ and $A$ are both conserved, the masses of the free protons and neutrons cancel, and
$$Q=\sum E_b(\text{products})-\sum E_b(\text{reactants})$$ $$\phantom{Q}=\sum_\text{products}A\,\frac{E_b}{A}-\sum_\text{reactants}A\,\frac{E_b}{A},$$with $E_b=0$ for a free proton or neutron. Energy is released exactly when the products are more tightly bound than the reactants.
Nuclear fission. In 1938 Otto Hahn and Fritz Strassmann found barium among the products of uranium bombarded with neutrons; Lise Meitner and Otto Frisch explained that the uranium nucleus had split in two. A slow neutron absorbed by ${}^{235}\text{U}$ forms ${}^{236}\text{U}$ in an excited state, which wobbles, stretches and splits into two middle-weight fragments and two or three fast neutrons, for example
$${}^{1}_{0}\text{n}+{}^{235}_{\ 92}\text{U}\to{}^{236}_{\ 92}\text{U}^{*}$$ $${}^{236}_{\ 92}\text{U}^{*}\to{}^{141}_{\ 56}\text{Ba}+{}^{92}_{36}\text{Kr}+3\,{}^{1}_{0}\text{n}.$$Many other pairs of fragments are possible (${}^{140}\text{Xe}+{}^{94}\text{Sr}+2\,{}^{1}_{0}\text{n}$ is another), usually of unequal size. Read off the curve: the uranium nucleons have $E_b/A\approx7.6\ \text{MeV}$, the fragments $\approx8.5\ \text{MeV}$, so each of the roughly $236$ nucleons gains $\approx0.9\ \text{MeV}$ of binding — about $200\ \text{MeV}$ per fission. Most of it appears as kinetic energy of the fragments, which becomes heat as they slow down in the fuel; the rest is carried by the neutrons, by gamma rays and by the later radioactive decay of the neutron-rich fragments.
The chain reaction. Each fission sets free $2$–$3$ neutrons, and each of these can cause another fission. If on average $k$ neutrons from one fission go on to cause another (the multiplication factor), the number of fissions grows by a factor $k$ every generation: for $k\gt1$ the reaction runs away (a supercritical system — the principle of the atom bomb), for $k=1$ it is steady (critical), for $k\lt1$ it dies out. Neutrons escape through the surface of a lump of fuel, so a chain reaction needs at least a critical size (critical mass) of fissile material.
The nuclear reactor keeps $k=1$ under control. Its main parts:
- Fuel — uranium enriched in ${}^{235}\text{U}$ (natural uranium has only $0.7\%$ of it), or natural uranium in heavy-water reactors such as India's PHWRs, in rods.
- Moderator — heavy water, ordinary water or graphite. Fission neutrons are fast (about $2\ \text{MeV}$), but ${}^{235}\text{U}$ captures slow (thermal, about $0.03\ \text{eV}$) neutrons far more readily. Collisions with light nuclei in the moderator slow them down without absorbing them.
- Control rods — cadmium or boron, which absorb neutrons strongly; pushing them in lowers $k$, pulling them out raises it. They can shut the reactor down at once.
- Coolant (water, heavy water, liquid sodium) carries the heat to a boiler, where steam drives turbines as in any power station; shielding of concrete and water protects people from the neutrons and gamma rays.
Nuclear fusion. At the other end of the curve, light nuclei release energy by joining. The reaction behind most fusion-power research is
$${}^{2}_{1}\text{H}+{}^{3}_{1}\text{H}\to{}^{4}_{2}\text{He}+{}^{1}_{0}\text{n}+17.6\ \text{MeV},$$and two deuterons can fuse in two ways: ${}^{2}_{1}\text{H}+{}^{2}_{1}\text{H}\to{}^{3}_{2}\text{He}+{}^{1}_{0}\text{n}+3.27\ \text{MeV}$ or $\to{}^{3}_{1}\text{H}+{}^{1}_{1}\text{H}+4.03\ \text{MeV}$. Per event these are smaller than the $200\ \text{MeV}$ of fission, but per nucleon of fuel D–T fusion gives $17.6/5=3.5\ \text{MeV}$, about four times fission's $0.85\ \text{MeV}$ — because the curve is so much steeper on the left.
Why fusion is hard. Both nuclei are positive. To fuse they must come within the range of the nuclear force, a few femtometres, and to get there they must climb the Coulomb barrier — about $0.5\ \text{MeV}$ for two deuterons. Matter must be heated to many millions of kelvin so that the nuclei move fast enough; fusion driven in this way is called a thermonuclear reaction. In practice fusion happens at temperatures well below what the barrier alone would suggest, because of the fastest nuclei in the Maxwell distribution and because quantum mechanics lets nuclei "tunnel" through the top of the barrier. On Earth the hot fuel (a plasma) must also be held together long enough — by magnetic fields in tokamaks such as the international ITER project in France, or by compressing tiny pellets with lasers. The hydrogen bomb releases fusion energy uncontrollably, using a fission bomb to reach the temperature.
Fusion in stars. The core of the Sun is at about $1.5\times10^7\ \text{K}$ and is held together by gravity. There, a chain of reactions (the proton–proton cycle) turns four protons into one helium-4 nucleus, two positrons and two neutrinos; with the annihilation of the positrons the net result is
$$4\,{}^{1}_{1}\text{H}\to{}^{4}_{2}\text{He}+2e^{+}+2\nu+\text{energy},$$and the energy follows from the atomic masses: $4m_\text{H}-M({}^{4}\text{He})=0.0287\ \text{u}$, i.e. $26.7\ \text{MeV}$.
Hotter, heavier stars also burn hydrogen through a cycle involving carbon, nitrogen and oxygen as catalysts, and later fuse helium into carbon ($3\,{}^{4}\text{He}\to{}^{12}\text{C}$) and so on up to iron. There it stops: beyond the peak of the curve fusion would absorb energy. Elements heavier than iron are made in rarer, more violent events such as supernovae and neutron-star collisions.
In Interactive 2 choose fission with $A=236$ and lighter fragment $A_1=95$, then switch to ²H + ³H. Which statement do the readouts support?
In the JEE Advanced 2026 syllabus; not in the JEE Main 2026 list (nor in NEET or the CBSE Class 12 syllabus). This box is for interest only; nothing here is used in the exercises, the Exam corner or the quiz.
Nuclei that are not on the stable line change by themselves into other nuclei, emitting alpha particles (${}^{4}_{2}\text{He}$ nuclei: $A$ falls by $4$, $Z$ by $2$ — common for heavy nuclei), beta particles (electrons or positrons: $Z$ changes by $\pm1$, $A$ stays the same, with an antineutrino or neutrino) or gamma rays (photons from an excited nucleus: neither $Z$ nor $A$ changes). Each decay has a Q-value found exactly as above, e.g. ${}^{238}\text{U}\to{}^{234}\text{Th}+{}^{4}\text{He}$ releases $4.27\ \text{MeV}$.
Decay is random: each nucleus has the same probability $\lambda\,dt$ of decaying in a time $dt$, whatever its age. So $dN/dt=-\lambda N$, giving the decay law $N=N_0e^{-\lambda t}$. The half-life is $T_{1/2}=\dfrac{\ln2}{\lambda}=\dfrac{0.693}{\lambda}$, the mean life $\tau=1/\lambda$, and the activity $R=\lambda N$ is measured in becquerels ($1\ \text{Bq}=1$ decay per second). After $n$ half-lives a fraction $(1/2)^n$ remains: a sample of ${}^{131}\text{I}$ ($T_{1/2}=8.0$ days) falls to $1/8$ of its activity in $24$ days.
1. Atomic or nuclear masses? Tables give atomic masses. With them use $m_\text{H}=1.007825\ \text{u}$ for each proton, so the electrons cancel. Using $m_p$ with an atomic mass leaves $Z$ electron masses ($0.511\ \text{MeV}$ each) in the answer — for uranium an error of $47\ \text{MeV}$.
2. Total binding energy is not stability. Compare nuclei by $E_b/A$. ${}^{238}\text{U}$ has the larger $E_b$ but ${}^{56}\text{Fe}$ the larger $E_b/A$; the nucleus with the largest $E_b/A$ is the most stable.
3. The sign of $Q$. $Q=(\text{mass before}-\text{mass after})\,c^2$, and also $Q=E_b(\text{after})-E_b(\text{before})$ — the two subtractions go in opposite orders. Free nucleons have zero binding energy but full mass: count every neutron that goes in or comes out.
4. Cube roots. $R\propto A^{1/3}$, volume $\propto A$, density independent of $A$. Doubling the radius means eight times the nucleons; "radius ratio" questions need cube roots, "density ratio" questions always give $1$.
5. Units and powers of ten. $1\ \text{u}=931.5\ \text{MeV}/c^2$; $1\ \text{MeV}=1.6\times10^{-13}\ \text{J}$; $1\ \text{fm}=10^{-15}\ \text{m}$. Energy per fission ($\sim10^{-11}\ \text{J}$) versus energy per kilogram ($\sim10^{14}\ \text{J}$) differ by Avogadro's number over the molar mass — keep track of grams and kilograms.
In a nuclear reactor, the control rods (of cadmium or boron) are there to
Exercises
Use $m_\text{H}=1.007825\ \text{u}$, $m_n=1.008665\ \text{u}$, $m_p=1.007276\ \text{u}$, $m_e=0.000549\ \text{u}$, $1\ \text{u}=1.6605\times10^{-27}\ \text{kg}=931.5\ \text{MeV}/c^2$, $1\ \text{MeV}=1.6\times10^{-13}\ \text{J}$, $R_0=1.2\ \text{fm}$, $c=3.0\times10^8\ \text{m/s}$ and $N_A=6.02\times10^{23}\ \text{mol}^{-1}$ unless told otherwise. Masses given are atomic masses.
- 1 For ${}^{56}_{26}\text{Fe}$ state the number of protons, neutrons and nucleons in the nucleus and of electrons in the neutral atom.
- 2 From ${}^{12}_{\ 6}\text{C}$, ${}^{13}_{\ 6}\text{C}$, ${}^{14}_{\ 6}\text{C}$, ${}^{14}_{\ 7}\text{N}$, ${}^{15}_{\ 7}\text{N}$, ${}^{16}_{\ 8}\text{O}$ pick out all sets of isotopes, isobars and isotones.
- 3 Find the radius of the nucleus of ${}^{216}_{\ 84}\text{Po}$.
- 4 Find the ratio of the radius of the ${}^{27}\text{Al}$ nucleus to that of the ${}^{64}\text{Cu}$ nucleus, and the ratio of their volumes.
- 5 The radius of a certain nucleus is twice that of ${}^{7}\text{Li}$. Find its mass number.
- 6 Boron has two stable isotopes, ${}^{10}\text{B}$ ($10.0129\ \text{u}$) and ${}^{11}\text{B}$ ($11.0093\ \text{u}$). Its atomic mass is $10.81\ \text{u}$. Find the percentage abundance of ${}^{10}\text{B}$.
- 7 The atomic mass of ${}^{40}_{20}\text{Ca}$ is $39.962591\ \text{u}$. Find the mass of its nucleus in kg and hence the density of the nucleus.
- 8 Explain why $R=R_0A^{1/3}$ means that all nuclei have the same density, and why the radii of atoms do not follow the same rule.
- 1 Find the energy equivalent of $1.0\ \text{g}$ of mass, in joules and in kilowatt-hours.
- 2 Find the rest energy of an electron in MeV.
- 3 The atomic mass of deuterium ${}^{2}_{1}\text{H}$ is $2.014102\ \text{u}$. Find its mass defect and binding energy.
- 4 The atomic mass of ${}^{16}_{\ 8}\text{O}$ is $15.994915\ \text{u}$. Find its binding energy per nucleon.
- 5 The atomic mass of ${}^{56}_{26}\text{Fe}$ is $55.934936\ \text{u}$. Find its binding energy and binding energy per nucleon.
- 6 A nucleus with $A=20$ has a binding energy of $8.0\ \text{MeV}$ per nucleon. Find its mass defect in u.
- 7 The atomic mass of ${}^{17}_{\ 8}\text{O}$ is $16.999132\ \text{u}$. Find the energy needed to remove one neutron from it (use part 4's ${}^{16}\text{O}$ mass).
- 8 Find the least energy needed to split a ${}^{12}\text{C}$ nucleus into three alpha particles (${}^{4}\text{He}$: $4.002603\ \text{u}$).
- 1 Arrange ${}^{2}\text{H}$, ${}^{4}\text{He}$, ${}^{56}\text{Fe}$ and ${}^{238}\text{U}$ in order of increasing stability, and give the reason.
- 2 True or false, with a reason: (a) the nuclear force between two neutrons is much weaker than between two protons; (b) the nuclear force is negligible at a separation of $10\ \text{fm}$; (c) two nucleons $0.3\ \text{fm}$ apart attract each other strongly.
- 3 Find the Q-value of ${}^{7}_{3}\text{Li}+{}^{1}_{1}\text{H}\to2\,{}^{4}_{2}\text{He}$ (${}^{7}\text{Li}$: $7.016003\ \text{u}$).
- 4 Find the Q-value of ${}^{14}_{\ 7}\text{N}+{}^{4}_{2}\text{He}\to{}^{17}_{\ 8}\text{O}+{}^{1}_{1}\text{H}$ (${}^{14}\text{N}$: $14.003074\ \text{u}$, ${}^{17}\text{O}$: $16.999132\ \text{u}$). Is it exothermic or endothermic?
- 5 A nucleus with $A=240$ and $E_b/A=7.6\ \text{MeV}$ splits into two equal fragments, each with $E_b/A=8.5\ \text{MeV}$. Find the energy released.
- 6 Two nuclei with $A=2$ and $E_b/A=1.1\ \text{MeV}$ fuse into one with $A=4$ and $E_b/A=7.1\ \text{MeV}$. Find the energy released.
- 7 Explain why $E_b/A$ falls for heavy nuclei, although the nuclear force between neighbouring nucleons is the same as in medium nuclei.
- 8 The total binding energies of ${}^{4}\text{He}$ and ${}^{238}\text{U}$ are $28.3$ and $1802\ \text{MeV}$. Compare their ratio with what you would expect (a) if each nucleon bound only to near neighbours and (b) if every nucleon attracted every other equally. What does this show?
- 1 Find the energy released by the complete fission of $1.0\ \text{kg}$ of ${}^{235}\text{U}$, and the mass of coal ($3.0\times10^7\ \text{J/kg}$) that gives the same heat.
- 2 A reactor produces heat at $500\ \text{MW}$. Find the number of fissions per second and the mass of ${}^{235}\text{U}$ used per day.
- 3 A power station delivers $300\ \text{MW}$ of electrical power from a reactor with an overall efficiency of $30\%$. Find the mass of ${}^{235}\text{U}$ it uses in a year ($3.156\times10^7\ \text{s}$).
- 4 In an assembly of uranium the multiplication factor is $k=1.1$. By what factor has the number of fissions per generation grown after $50$ generations? What value of $k$ does a working reactor keep?
- 5 State the job of the moderator, the control rods and the coolant in a reactor, and why a moderator must be made of light nuclei.
- 6 Find the Q-value of ${}^{2}_{1}\text{H}+{}^{2}_{1}\text{H}\to{}^{3}_{2}\text{He}+{}^{1}_{0}\text{n}$ (${}^{2}\text{H}$: $2.014102\ \text{u}$, ${}^{3}\text{He}$: $3.016029\ \text{u}$).
- 7 The Sun radiates $3.8\times10^{26}\ \text{W}$. Each conversion of four protons into helium releases $26.7\ \text{MeV}$. Find how many such conversions occur each second and the mass of hydrogen consumed per second (take the mass of a proton as $1.67\times10^{-27}\ \text{kg}$).
- 8 D–T fusion releases $17.6\ \text{MeV}$ per reaction. Find the energy per kilogram of D–T fuel (molar mass $5\ \text{g/mol}$ per D–T pair) and how many times the energy per kilogram of ${}^{235}\text{U}$ this is.
E1. JEE Main · MCQ The nuclei ${}^{27}_{13}\text{Al}$ and ${}^{125}_{\ 52}\text{Te}$ have radii $R_1$ and $R_2$ and densities $\rho_1$ and $\rho_2$. Then (A) $R_1:R_2=27:125$ and $\rho_1:\rho_2=1:1$ (B) $R_1:R_2=3:5$ and $\rho_1:\rho_2=125:27$ (C) $R_1:R_2=3:5$ and $\rho_1:\rho_2=1:1$ (D) $R_1:R_2=1:1$ and $\rho_1:\rho_2=27:125$
E2. JEE Main · Numerical The binding energies per nucleon of ${}^{2}_{1}\text{H}$ and ${}^{4}_{2}\text{He}$ are $1.1\ \text{MeV}$ and $7.0\ \text{MeV}$. Find the energy released, in MeV, when two deuterons fuse to form one ${}^{4}_{2}\text{He}$ nucleus. Give the answer to the nearest integer.
E3. JEE Main · MCQ Which statement is correct? (A) ${}^{56}\text{Fe}$ has the largest total binding energy of all nuclei (B) the nuclear force between two protons is much weaker than that between two neutrons (C) heavy nuclei such as ${}^{238}\text{U}$ have the largest binding energy per nucleon, which makes them the most stable (D) energy is released when nuclei on either side of $A\approx60$ are converted into nuclei closer to $A\approx60$
E4. JEE Main · Numerical A nuclear reactor produces heat at $320\ \text{MW}$, each fission of ${}^{235}\text{U}$ releasing $200\ \text{MeV}$. If the number of fissions per second is $x\times10^{18}$, find $x$. ($1\ \text{MeV}=1.6\times10^{-13}\ \text{J}$.) Give the answer to the nearest integer.
E5. JEE Main · MCQ In the reaction ${}^{6}_{3}\text{Li}+{}^{2}_{1}\text{H}\to2\,{}^{4}_{2}\text{He}$, the atomic masses are ${}^{6}\text{Li}=6.015123\ \text{u}$, ${}^{2}\text{H}=2.014102\ \text{u}$ and ${}^{4}\text{He}=4.002603\ \text{u}$. Taking $1\ \text{u}=931.5\ \text{MeV}/c^2$, the energy released is (A) $11.2\ \text{MeV}$ (B) $22.4\ \text{MeV}$ (C) $-22.4\ \text{MeV}$ (D) $44.7\ \text{MeV}$
E6. JEE Main · Numerical In the cores of old stars three ${}^{4}_{2}\text{He}$ nuclei fuse into one ${}^{12}_{\ 6}\text{C}$ nucleus. The binding energies per nucleon of ${}^{4}\text{He}$ and ${}^{12}\text{C}$ are $7.07\ \text{MeV}$ and $7.68\ \text{MeV}$. Find the energy released per reaction in MeV. Give the answer to the nearest integer.
Research question. How many kilograms of fuel — coal, natural gas, uranium-235 or deuterium–tritium — would it take to supply the electricity used by a city of ten million people for one year, and what mass "disappears" in each case?
Why it matters. Every country is deciding how to make electricity with less carbon dioxide. Nuclear fission already supplies about a tenth of the world's electricity, from France and the USA to India's heavy-water reactors and new plants in China and the UAE, and fusion experiments such as ITER aim to prove the next step. The comparison of fuel masses — and of the waste each produces — rests directly on $E=\Delta m\,c^2$ and the binding-energy curve.
What to do.
- Find the yearly electricity use of a large city of your choice (city or national statistics give it in TWh) and convert it to joules.
- Look up typical efficiencies of coal, gas and nuclear power stations (about $33$–$40\%$, up to $60\%$ for combined-cycle gas) and find the heat each must produce.
- Using $3\times10^7\ \text{J/kg}$ for coal, $5\times10^7\ \text{J/kg}$ for natural gas, $200\ \text{MeV}$ per ${}^{235}\text{U}$ fission and $17.6\ \text{MeV}$ per D–T fusion, find the mass of fuel for each. For natural uranium (only $0.7\%$ ${}^{235}\text{U}$), how much ore-derived uranium is that?
- For each fuel compute the mass actually converted into energy, $\Delta m=E/c^2$. Compare it with the fuel mass.
- Estimate the mass of carbon dioxide produced by the coal and gas options (about $3.7\ \text{kg}$ of $\text{CO}_2$ per kg of carbon burnt).
Tools: A spreadsheet, published energy statistics (national grid operators, the International Energy Agency), the data in this section.
Hand in: A one-page table of fuel mass, mass converted to energy and $\text{CO}_2$ for each option, with your assumptions stated, and a paragraph comparing them — including one disadvantage of each that the numbers do not show (waste, safety, cost, land, technology readiness).
Going further. Deuterium makes up about $1$ in $6400$ hydrogen atoms in sea water. Estimate how much sea water would supply the deuterium for your city for a year, and where tritium (which is not found in nature) would come from.
🧪 Self-check quiz
Q1. The ratio of the radius of a ${}^{64}\text{Cu}$ nucleus to that of a ${}^{8}\text{Be}$ nucleus is
Q2. The energy equivalent of one atomic mass unit is
Q3. Which of these nuclei has the largest binding energy per nucleon?
Q4. The moderator in a thermal nuclear reactor
Q5. Nuclear fusion needs temperatures of the order of $10^7\ \text{K}$ or more because