Chapter 5 · Rotational Motion

5.1 Centre of Mass

Every system of particles — a dumbbell, a plate with a hole, a family on a boat, a shell that bursts in mid-air — has one special point, the centre of mass, that moves as if all the mass were there and all the external forces acted on it: $M\mathbf{a}_\text{cm}=\mathbf{F}_\text{ext}$.

Toss a hammer to a friend. The handle and the head tumble over each other in a complicated way, yet one point of the hammer — a little way up the handle from the head — sails along a perfect parabola, exactly like a small stone thrown with the same speed. Watch a firework shell burst at the top of its flight: the glowing fragments fly off in every direction, but the "average position" of the debris carries on along the path the shell was following. A high-jumper arching backwards over the bar can clear it while that same special point of her body passes under the bar.

The special point is the centre of mass. It lets us treat any body, or any group of bodies, as a single particle as far as its overall motion is concerned — the internal pushes and pulls, however violent, drop out. In this section we define the centre of mass for two particles and for many, find it for continuous rigid bodies (rods, rings, discs, plates with holes cut in them), and then prove the law that makes it so useful: the centre of mass accelerates as $\mathbf{F}_\text{ext}/M$. That law is the key to every "man walking on a boat" and "shell exploding in mid-air" problem in JEE Main. It builds on Newton's laws and the conservation of momentum from Section 3.1 and on vectors from Section 2.2.

Centre of mass of a two-particle system

Think of a dumbbell made of two balls on a light rod. If you support it with one finger, there is exactly one place where it balances: closer to the heavier ball. If the masses are equal, it balances in the middle; if one ball is three times as heavy, the balance point is three times closer to it. This balance point is the centre of mass, and the rule "nearer the heavier mass, in inverse proportion" is the whole idea. Let us make it precise.

Put the two particles on the $x$-axis: mass $m_1$ at $x_1$ and mass $m_2$ at $x_2$. We want a single position that "averages" the two, giving each particle a weight equal to its mass.

📘 Definition 5.1 — Centre of mass of a system of particles

For two particles of masses $m_1$, $m_2$ at positions $x_1$, $x_2$ on a line, the centre of mass is at

$$x_\text{cm}=\frac{m_1x_1+m_2x_2}{m_1+m_2}.$$

For $n$ particles of masses $m_i$ at position vectors $\mathbf{r}_i$, with total mass $M=\sum m_i$, the centre of mass is the point with position vector

$$\mathbf{r}_\text{cm}=\frac{1}{M}\sum_{i=1}^{n}m_i\mathbf{r}_i,$$

that is, $x_\text{cm}=\dfrac{\sum m_ix_i}{M}$, $y_\text{cm}=\dfrac{\sum m_iy_i}{M}$, $z_\text{cm}=\dfrac{\sum m_iz_i}{M}$ — a mass-weighted average of the positions, one coordinate at a time.

Two quick consequences. If $m_1=m_2$, then $x_\text{cm}=\tfrac12(x_1+x_2)$: the midpoint. And if one mass is much larger, $x_\text{cm}$ is practically at the larger mass — the centre of mass of the Sun and a small planet is almost at the centre of the Sun.

Now put the origin at $m_1$ and let $d$ be the separation, so $x_1=0$ and $x_2=d$. Then $x_\text{cm}=\dfrac{m_2d}{m_1+m_2}$, and its distance from $m_2$ is $d-x_\text{cm}=\dfrac{m_1d}{m_1+m_2}$.

📐 Result 5.1 — Centre of mass of two particles

The centre of mass of two particles $m_1$ and $m_2$ a distance $d$ apart lies on the line joining them, between them, at distances

$$r_1=\frac{m_2}{m_1+m_2}\,d\quad\text{from }m_1,\qquad r_2=\frac{m_1}{m_1+m_2}\,d\quad\text{from }m_2 .$$

Hence $m_1r_1=m_2r_2$: the distances are in the inverse ratio of the masses, and the centre of mass is nearer the heavier particle.

The relation $m_1r_1=m_2r_2$ is just the balance condition for a see-saw — the moments of the two weights about the balance point are equal. We will meet moments of forces properly in Section 5.2; here it is enough to see that the centre of mass is the point about which the masses "balance".

Properties worth knowing. (i) The centre of mass is a property of the system, not of the coordinates: shifting the origin by a vector $\mathbf{a}$ shifts every $\mathbf{r}_i$ and also $\mathbf{r}_\text{cm}$ by $\mathbf{a}$, so the point itself does not move. (ii) Measured from the centre of mass, the mass-weighted positions add to zero: $\sum m_i(\mathbf{r}_i-\mathbf{r}_\text{cm})=\mathbf{0}$. (iii) You may replace any group of particles by a single particle of the group's total mass placed at the group's centre of mass — the overall centre of mass is unchanged. Property (iii) is what lets us build up the centre of mass of complicated bodies from simple pieces.

✏️ Example 1 — Where is the centre of mass of the Earth–Moon system?
The Earth ($5.97\times10^{24}\ \text{kg}$) and the Moon ($7.35\times10^{22}\ \text{kg}$) are $3.84\times10^{8}\ \text{m}$ apart, centre to centre. (a) Find the distance of their centre of mass from the centre of the Earth. (b) Is it inside or outside the Earth (radius $6.37\times10^6\ \text{m}$)?
Formula Distance from the Earth: $r_E=\dfrac{m_\text{Moon}}{M_E+m_\text{Moon}}\,d$ (Result 5.1).
(a) $M_E+m_\text{Moon}=6.04\times10^{24}\ \text{kg}$, so $r_E=\dfrac{7.35\times10^{22}}{6.04\times10^{24}}\times3.84\times10^8=4.67\times10^6\ \text{m}$.
(b) $4.67\times10^6\ \text{m}\lt6.37\times10^6\ \text{m}$: the centre of mass is inside the Earth, about $1700\ \text{km}$ below the surface.
Meaning Both bodies actually circle this point once a month, so the Earth's centre wobbles around a circle of radius $4670\ \text{km}$. Astronomers detect planets around other stars by exactly this kind of wobble.
Check $m_1r_1=m_2r_2$: $5.97\times10^{24}\times4.67\times10^6\approx2.79\times10^{31}$ and $7.35\times10^{22}\times(3.84\times10^8-4.67\times10^6)\approx2.79\times10^{31}$ ✓.
✏️ Example 2 — Three particles in a plane
Particles of masses $1.0\ \text{kg}$, $2.0\ \text{kg}$ and $3.0\ \text{kg}$ are at the points $(0,0)$, $(4,0)$ and $(1,3)$, all in metres. (a) Find the centre of mass. (b) Where should a fourth particle of mass $2.0\ \text{kg}$ be placed so that the centre of mass of all four is at $(1,1)$?
(a) $M=6.0\ \text{kg}$. $x_\text{cm}=\dfrac{1(0)+2(4)+3(1)}{6}=\dfrac{11}{6}=1.83\ \text{m}$; $y_\text{cm}=\dfrac{1(0)+2(0)+3(3)}{6}=1.5\ \text{m}$. So $\mathbf{r}_\text{cm}=(1.83,\,1.5)\ \text{m}$.
(b) Set up Now $M=8.0\ \text{kg}$ and $\sum m_ix_i=11+2x$, $\sum m_iy_i=9+2y$ (in kg m).
Solve $\dfrac{11+2x}{8}=1\Rightarrow x=-1.5\ \text{m}$; $\dfrac{9+2y}{8}=1\Rightarrow y=-0.5\ \text{m}$. The fourth particle goes at $(-1.5,\,-0.5)\ \text{m}$.
Check Using property (iii): the first three act like $6\ \text{kg}$ at $(1.83,1.5)$; the new centre $(1,1)$ must divide the line from there to $(-1.5,-0.5)$ in the ratio $2:6$. Along $x$: $1.83-1=0.83$ and $1-(-1.5)=2.5$, ratio $1:3$ ✓.

Particles of $1.0\ \text{kg}$ and $3.0\ \text{kg}$ are $40\ \text{cm}$ apart. How far is their centre of mass from the $1.0\ \text{kg}$ particle?

Centre of mass of a rigid body

A ruler, a wheel or a steel plate contains something like $10^{25}$ atoms. Summing $m_i\mathbf{r}_i$ over all of them is hopeless — but it is also unnecessary, because for these bodies the atoms keep fixed distances from each other and the mass is spread smoothly.

📘 Definition 5.2 — Rigid body; centre of mass of a continuous body

A rigid body is a body in which the distance between every pair of its particles stays the same, whatever forces act on it. (Real bodies are very nearly rigid when their deformations are tiny compared with their size.)

For a body whose mass is spread continuously, divide it into small elements of mass $dm$ at position $\mathbf{r}$ and replace the sum by an integral:

$$\mathbf{r}_\text{cm}=\frac{1}{M}\int\mathbf{r}\,dm,\qquad x_\text{cm}=\frac{1}{M}\int x\,dm,\quad y_\text{cm}=\frac{1}{M}\int y\,dm,\quad M=\int dm .$$

For a thin rod along the $x$-axis with linear mass density $\lambda(x)$ (mass per unit length, in kg/m), $dm=\lambda\,dx$. For a thin plate with surface density $\sigma$ (kg/m²), $dm=\sigma\,dA$; for a solid with density $\rho$, $dm=\rho\,dV$.

For a rigid body the centre of mass is a fixed point of the body (it moves with the body) — although, as a ring shows, it need not lie in the material at all.

Symmetry first. If a uniform body has a centre of symmetry (a uniform rod, ring, disc, sphere, rectangular plate, cube), the centre of mass is at that centre: every element $dm$ at $\mathbf{r}$ is matched by an equal element at $-\mathbf{r}$, and the integral vanishes. If it has an axis or a plane of symmetry, the centre of mass lies on it. Symmetry usually tells you two of the three coordinates for free; you integrate only for the third.

A non-uniform rod. For a rod from $x=0$ to $x=L$ with $\lambda=kx$ (getting heavier towards $x=L$): $M=\int_0^Lkx\,dx=\tfrac12kL^2$ and $\int_0^Lx\,kx\,dx=\tfrac13kL^3$, so $x_\text{cm}=\tfrac23L$ — beyond the middle, towards the heavy end, as it should be.

A semicircular ring (thin uniform wire bent into a half-circle of radius $R$, mass $M$). Measure the angle $\theta$ from the diameter; an element of arc $R\,d\theta$ has mass $dm=\dfrac{M}{\pi R}R\,d\theta=\dfrac{M}{\pi}d\theta$ and height $y=R\sin\theta$. By symmetry $x_\text{cm}=0$, and

$$y_\text{cm}=\frac1M\int_0^\pi R\sin\theta\,\frac{M}{\pi}\,d\theta=\frac{R}{\pi}\Big[-\cos\theta\Big]_0^\pi=\frac{2R}{\pi}.$$

A semicircular disc (uniform half-disc of radius $R$). Cut it into thin semicircular rings of radius $r$ and width $dr$. Each has mass $dm=\dfrac{M}{\tfrac12\pi R^2}\,\pi r\,dr=\dfrac{2Mr}{R^2}dr$ and, from the ring result, its centre of mass at height $\dfrac{2r}{\pi}$. By property (iii):

$$y_\text{cm}=\frac1M\int_0^R\frac{2r}{\pi}\cdot\frac{2Mr}{R^2}\,dr=\frac{4}{\pi R^2}\cdot\frac{R^3}{3}=\frac{4R}{3\pi}.$$

The disc's centre of mass ($0.42R$) is lower than the ring's ($0.64R$) because the disc has mass spread right down to the centre. The same strip-and-integrate method gives the rest of the standard results below; JEE Main expects you to know them.

📐 Result 5.2 — Centres of mass of uniform bodies
Uniform bodyCentre of mass
rod of length $L$midpoint, $L/2$ from either end
ring, disc, sphere (solid or hollow), rectangle, cubegeometric centre
triangular platecentroid (meeting point of the medians)
semicircular ring, radius $R$$2R/\pi$ from the centre, on the axis
semicircular disc, radius $R$$4R/(3\pi)$ from the centre, on the axis
hollow hemisphere (shell), radius $R$$R/2$ from the centre of the flat face
solid hemisphere, radius $R$$3R/8$ from the centre of the flat face
solid cone, height $h$$h/4$ above the base, on the axis
hollow cone (curved surface only), height $h$$h/3$ above the base, on the axis

These hold only for uniform bodies (constant $\lambda$, $\sigma$ or $\rho$). Distances for the hemispheres are measured from the centre of the flat face, not from the top.

✏️ Example 3 — A rod that gets heavier along its length
A rod of length $L=1.2\ \text{m}$ lies along the $x$-axis from $x=0$ to $x=L$. Its linear mass density is $\lambda=\lambda_0\left(1+\dfrac{x}{L}\right)$ with $\lambda_0=2.0\ \text{kg/m}$. Find (a) the mass of the rod, (b) the position of its centre of mass.
(a) $M=\displaystyle\int_0^L\lambda_0\left(1+\frac xL\right)dx=\lambda_0\left(L+\frac L2\right)=\frac32\lambda_0L=\frac32\times2.0\times1.2=3.6\ \text{kg}$.
Moment $\displaystyle\int_0^Lx\,\lambda\,dx=\lambda_0\left(\frac{L^2}{2}+\frac{L^2}{3}\right)=\frac56\lambda_0L^2$.
(b) $x_\text{cm}=\dfrac{\tfrac56\lambda_0L^2}{\tfrac32\lambda_0L}=\dfrac59L=\dfrac59\times1.2=0.67\ \text{m}$ from the light end.
Check The density rises from $\lambda_0$ to $2\lambda_0$, so the centre of mass must lie between the middle ($0.5L$) and the $\lambda=kx$ answer ($0.67L$, density rising from zero). $\tfrac59L=0.56L$ ✓.

Composite bodies and bodies with holes. Property (iii) turns a complicated body into a few "particles": split the body into simple parts, replace each part by its mass at its own centre of mass, and use Definition 5.1. A hole is handled by a neat trick: a plate with a hole is the full plate minus the piece that was removed. Treat the removed piece as a particle of negative mass at the centre of the hole:

$$x_\text{cm}=\frac{M\,x_\text{full}-m\,x_\text{hole}}{M-m}.$$

For uniform plates the masses are proportional to areas, and for uniform solids to volumes — so for circles use $r^2$, for spheres $r^3$.

🧭 Problem-solving strategy — Centre of mass of a composite body
  1. Choose the origin at a point of symmetry and the $x$-axis along a symmetry line — then you need only one coordinate.
  2. Split the body into pieces whose centres of mass you know (Result 5.2). A removed piece counts with a minus sign.
  3. Find each mass from its length, area or volume (same density ⇒ mass $\propto$ size).
  4. Apply $x_\text{cm}=\dfrac{\sum m_ix_i}{\sum m_i}$, keeping signs of both masses and coordinates.
  5. Check: the centre of mass moves away from a hole and towards an added lump.
✏️ Example 4 — A disc with a hole cut in it
From a uniform disc of radius $12\ \text{cm}$, a circular hole of radius $6.0\ \text{cm}$ is cut out. The hole touches the rim, so its centre is $6.0\ \text{cm}$ from the centre $O$ of the disc. (a) Find the position of the centre of mass of the remaining plate. (b) Show that for a hole of radius $R/2$ touching the rim of a disc of radius $R$, the shift is always $R/6$.
Find the distance of the new centre of mass from $O$ before you open the solution:
Masses Put $O$ at the origin and the hole's centre at $x=+6.0\ \text{cm}$. Mass $\propto$ area: full disc $M\propto144$, hole $m\propto36$, so $m=\tfrac14M$ and the plate left has $\tfrac34M$.
(a) $x_\text{cm}=\dfrac{M(0)-\tfrac14M(6.0)}{\tfrac34M}=-2.0\ \text{cm}$: $2.0\ \text{cm}$ from $O$, on the side away from the hole.
(b) Hole of radius $R/2$ at $x=R/2$: $m=\tfrac14M$, so $x_\text{cm}=\dfrac{-\tfrac14M\cdot\tfrac R2}{\tfrac34M}=-\dfrac R6$, whatever the size of the disc.
Check Two-particle balance about the new centre: remaining $\tfrac34M$ at $2.0\ \text{cm}$ on one side "balances" the missing $\tfrac14M$ at $8.0\ \text{cm}$ on the other — $\tfrac34\times2=\tfrac14\times6$, measured from $O$ ✓.

In the widget the disc has radius $10\ \text{cm}$. Set the hole radius to $r=5\ \text{cm}$ and its centre at $d=5\ \text{cm}$ from $O$. Where will the centre of mass of the plate be?

Set $r=5$ and $d=5$: the readouts show removed mass $25.0\%$ of $M$ and $x_\text{cm}=-1.67\ \text{cm}$ — the minus sign means the side opposite the hole. The removed quarter, at $5\ \text{cm}$, has moment $0.25\times5=1.25$; the remaining $0.75M$ must have the same moment on the other side, so $|x_\text{cm}|=1.25/0.75=1.67\ \text{cm}$. ($2.5\ \text{cm}$ would come from dividing by $M$ instead of by the remaining mass $0.75M$.) Press Play to grow a hole that always touches the rim: the shift rises to $3.56\ \text{cm}$ at $r=8\ \text{cm}$.
Interactive 1 — Cut a Hole: Where Does the Centre of Mass Go?

A uniform disc of radius $10\ \text{cm}$ has a circular hole of radius $r$ whose centre is a distance $d$ from the disc's centre $O$. The plate is "full disc at $O$" plus "negative mass at the hole's centre", so its centre of mass (red) sits on the line through $O$ and the hole, on the far side. The graph shows the shift against $r$ for your $d$ (solid) and for a hole that touches the rim (dashed). Press Play to grow a rim-touching hole.

5 cm5 cm
removed mass—
centre of mass $x_\text{cm}$—
hole centre $d$—
moments about O—
📘 Definition 5.3 — Centre of gravity

The centre of gravity of a body is the point through which the resultant of the gravitational forces on all its particles acts, whatever the orientation of the body. In a uniform gravitational field (the same $\mathbf{g}$ at every particle — true for any body small compared with the Earth) the centre of gravity coincides with the centre of mass.

The proof is one line: the weights $m_i\mathbf{g}$ are parallel, and their total moment about the centre of mass is $\sum(\mathbf{r}_i-\mathbf{r}_\text{cm})\times m_i\mathbf{g}=\left[\sum m_i(\mathbf{r}_i-\mathbf{r}_\text{cm})\right]\times\mathbf{g}=\mathbf{0}$ by property (ii). For a very tall building or a satellite, $\mathbf{g}$ varies across the body and the two points separate slightly. This is why a plate hung from a pin settles with its centre of mass vertically below the pin — the classic way to find the centre of mass of an irregular lamina: hang it from two different holes and see where the two plumb lines cross.

A uniform metre rule has its centre of mass at the $50\ \text{cm}$ mark. The piece from $0$ to $20\ \text{cm}$ is cut off and thrown away. Where is the centre of mass of the remaining piece?

Motion of the centre of mass

Why is the centre of mass worth all this trouble? Because it moves in a remarkably simple way. Differentiate $M\mathbf{r}_\text{cm}=\sum m_i\mathbf{r}_i$ with respect to time (the masses are constant):

$$M\mathbf{v}_\text{cm}=\sum m_i\mathbf{v}_i=\mathbf{P},\qquad M\mathbf{a}_\text{cm}=\sum m_i\mathbf{a}_i .$$

The first says that the total momentum $\mathbf{P}$ of the system is the same as if all the mass moved with the centre of mass. For the second, Newton's second law for particle $i$ says $m_i\mathbf{a}_i$ equals the total force on it — the external forces from outside the system plus the internal forces from the other particles. When we add over all particles, the internal forces come in action–reaction pairs ($\mathbf{F}_{12}=-\mathbf{F}_{21}$, Newton's third law) and cancel completely. Only the external forces survive.

📐 Law 5.3 — Motion of the centre of mass

For a system of particles of constant total mass $M$, with total external force $\mathbf{F}_\text{ext}$,

$$M\mathbf{a}_\text{cm}=\mathbf{F}_\text{ext},\qquad \mathbf{P}=M\mathbf{v}_\text{cm},\qquad \mathbf{F}_\text{ext}=\frac{d\mathbf{P}}{dt}.$$

The centre of mass moves like a single particle of mass $M$ acted on by the external forces alone. Internal forces — however large, and whether they are springs, explosions, friction between parts or muscles — cannot change the motion of the centre of mass.

📐 Result 5.4 — Isolated systems

If $\mathbf{F}_\text{ext}=\mathbf{0}$, then $\mathbf{P}$ is conserved and $\mathbf{v}_\text{cm}$ is constant. In particular, if the centre of mass starts at rest, it stays at rest, whatever the parts of the system do. If the external force is zero along one direction only (say horizontally), these statements hold for that component only.

Three pictures to keep in mind. A shell bursting in flight: the explosion is internal, so the centre of mass of the fragments carries on along the original parabola — until a fragment hits the ground, when the ground's force (external) spoils it. Two skaters pulling on a rope: they start at rest on frictionless ice, so their centre of mass stays fixed and they meet there. A person walking on a boat on still water: there is no horizontal external force (we neglect water resistance), so as the person walks forward the boat slides back, keeping the centre of mass in place.

📐 Result 5.5 — Walking on a floating boat

A person of mass $m$ walks a distance $L$ relative to a boat (or plank) of mass $M$ that floats freely, with the system initially at rest and no horizontal external force. Then the boat moves backwards through

$$\Delta x_\text{boat}=\frac{m}{m+M}\,L,\qquad\text{and the person moves forwards through}\qquad \Delta x_\text{person}=\frac{M}{m+M}\,L$$

relative to the ground. Proof: $m\,\Delta x_\text{person}=M\,\Delta x_\text{boat}$ (centre of mass fixed) and $\Delta x_\text{person}+\Delta x_\text{boat}=L$.

✏️ Example 5 — Walking along a rowing boat
A $60\ \text{kg}$ man stands at the back of a $140\ \text{kg}$ boat, $4.0\ \text{m}$ long, at rest on still water. He walks to the front. Neglect water resistance. (a) How far does the boat move, and in which direction? (b) How far does the man move relative to the shore? (c) If he walks at $1.0\ \text{m/s}$ relative to the boat, find the boat's speed.
Find how far the boat moves before you open the solution:
Idea No horizontal external force, system at rest: the centre of mass of man + boat does not move horizontally (Result 5.4).
(a) $\Delta x_\text{boat}=\dfrac{m}{m+M}L=\dfrac{60}{200}\times4.0=1.2\ \text{m}$, backwards (opposite to his walk).
(b) $\Delta x_\text{man}=4.0-1.2=2.8\ \text{m}$ forwards. Check: $60\times2.8=168=140\times1.2$ ✓.
(c) Momentum stays zero: $60\,v_\text{man}=140\,v_\text{boat}$ with $v_\text{man}+v_\text{boat}=1.0\ \text{m/s}$, so $v_\text{boat}=\dfrac{60}{200}\times1.0=0.30\ \text{m/s}$ backwards.
⏱ Shortcut The boat moves the fraction $\dfrac{m}{m+M}$ of the relative distance; the man the fraction $\dfrac{M}{m+M}$. Never use $4.0\ \text{m}$ as the man's displacement over the ground.
✏️ Example 6 — A shell that bursts at the top
A $5.0\ \text{kg}$ shell is fired from level ground at $50\ \text{m/s}$, $37^\circ$ above the horizontal ($\sin37^\circ=0.6$, $\cos37^\circ=0.8$; take $g=10\ \text{m/s}^2$, no air resistance). At the highest point it explodes into two pieces. The $2.0\ \text{kg}$ piece is left momentarily at rest and falls vertically. (a) Find the velocity of the $3.0\ \text{kg}$ piece just after the explosion. (b) Where does it land? (c) Confirm that the centre of mass of the pieces lands where the unexploded shell would have.
Find where the $3.0\ \text{kg}$ piece lands (distance from the gun):
Flight $u_x=40\ \text{m/s}$, $u_y=30\ \text{m/s}$. Top reached at $t=3.0\ \text{s}$, height $H=\dfrac{u_y^2}{2g}=45\ \text{m}$, at $x=120\ \text{m}$. Range of the unexploded shell $R=\dfrac{2u_xu_y}{g}=240\ \text{m}$.
(a) The explosion is internal, so momentum is conserved: $5.0\times40=2.0\times0+3.0\,v$, giving $v=66.7\ \text{m/s}$, horizontal.
(b) Both pieces start with zero vertical velocity at $45\ \text{m}$, so each falls for $3.0\ \text{s}$. The $3.0\ \text{kg}$ piece lands at $x=120+66.7\times3.0=320\ \text{m}$; the $2.0\ \text{kg}$ piece at $120\ \text{m}$.
(c) $x_\text{cm}=\dfrac{2.0(120)+3.0(320)}{5.0}=\dfrac{1200}{5.0}=240\ \text{m}=R$ ✓.
⏱ Shortcut When the pieces land together, $x_\text{cm}=R$; so $2(R/2)+3x=5R$ gives $x=\tfrac43R=320\ \text{m}$ without finding any velocity.

Use the widget's shell ($5\ \text{kg}$, range $240\ \text{m}$). Set piece A to $2\ \text{kg}$ and its velocity just after the burst to $-40\ \text{m/s}$, so that it flies straight back along the path it came on. Where does piece B land?

With $m_A=2\ \text{kg}$ and $v_A=-40\ \text{m/s}$ the readouts show $v_B=93.3\ \text{m/s}$, A landing at $0\ \text{m}$ (back at the gun), B at $400\ \text{m}$ and the centre of mass at $240\ \text{m}$. Momentum: $5\times40=2(-40)+3v_B$, so $v_B=93.3\ \text{m/s}$; both fall for $3\ \text{s}$, so B lands at $120+93.3\times3=400\ \text{m}$. And $\dfrac{2(0)+3(400)}{5}=240\ \text{m}$ — the centre of mass is not disturbed by the explosion.
Interactive 2 — The Bursting Shell: the Centre of Mass Keeps Going

A $5\ \text{kg}$ shell is fired at $50\ \text{m/s}$, $37^\circ$ ($g=10\ \text{m/s}^2$). At the top ($x=120\ \text{m}$, $45\ \text{m}$ up, moving at $40\ \text{m/s}$) it bursts into piece A (red) and piece B (blue). You choose A's mass and its horizontal velocity just after the burst; momentum conservation fixes B's. Press Play: the purple centre of mass rides the dashed parabola of the unexploded shell, wherever the pieces go.

2 kg0 m/s
velocity of B—
A lands at—
B lands at—
centre of mass lands at—
⚠️ JEE Main traps

1. Measuring from the wrong particle. The centre of mass is nearer the heavier particle: $r_1=\dfrac{m_2}{m_1+m_2}d$ has the other mass on top.

2. Holes and cut-outs. Use a negative mass at the centre of the removed piece, with masses proportional to area ($r^2$) for plates and to volume ($r^3$) for solids — not to the radius. Divide by the remaining mass $M-m$, not by $M$ (widget 1).

3. Letting internal forces move the centre of mass. Explosions, springs, people walking and friction between parts of the system are internal. Only external forces appear in $M\mathbf{a}_\text{cm}=\mathbf{F}_\text{ext}$. The ground's push on a fragment that has landed is external.

4. Relative versus ground displacement. In boat and plank problems the given distance is usually relative to the boat. The boat moves $\dfrac{m}{m+M}L$ and the person $\dfrac{M}{m+M}L$ over the ground (Result 5.5).

5. Standard results from the wrong reference point. $3R/8$ (solid hemisphere) and $R/2$ (hollow hemisphere) are measured from the centre of the flat face; $h/4$ (solid cone) from the base. They hold only for uniform bodies — for a non-uniform rod, integrate.

A shell moving along a parabola bursts into several fragments in mid-air. Just after the explosion, before any fragment lands, the centre of mass of the fragments

Exercises

Take $g=9.8\ \text{m/s}^2$ unless told otherwise. All bodies are uniform unless a density is given.

I
Centre of mass of particles.
  • 1 A $2.0\ \text{kg}$ particle is at $x=0$ and a $3.0\ \text{kg}$ particle at $x=5.0\ \text{m}$. Find $x_\text{cm}$.
  • 2 Particles of $1.0\ \text{kg}$, $2.0\ \text{kg}$ and $2.0\ \text{kg}$ are at $(1,2)$, $(3,-1)$ and $(-2,4)$ (metres). Find the centre of mass.
  • 3 Particles of $3.0\ \text{kg}$ and $5.0\ \text{kg}$ are $0.80\ \text{m}$ apart. Find the distance of the centre of mass from the $3.0\ \text{kg}$ particle.
  • 4 In a carbon monoxide molecule the carbon ($12\ \text{u}$) and oxygen ($16\ \text{u}$) nuclei are $0.113\ \text{nm}$ apart. Find the distance of the centre of mass from the carbon nucleus, in nm.
  • 5 Three equal masses sit at the corners of an equilateral triangle of side $0.30\ \text{m}$. How far is the centre of mass from each corner?
  • 6 Masses of $1$, $2$, $3$ and $4\ \text{kg}$ are at the corners $(0,0)$, $(1,0)$, $(1,1)$ and $(0,1)$ of a square of side $1.0\ \text{m}$. Find the centre of mass.
  • 7 A $4.0\ \text{kg}$ particle is at the origin and a $6.0\ \text{kg}$ particle at $x=2.0\ \text{m}$. The $6.0\ \text{kg}$ particle is moved $0.50\ \text{m}$ towards the origin. How far, and which way, must the $4.0\ \text{kg}$ particle be moved to keep the centre of mass where it was?
  • 8 Show that the centre of mass of two particles does not depend on where the origin is chosen.
1 $x_\text{cm}=\dfrac{0+3.0\times5.0}{5.0}=3.0\ \text{m}$.
2 $M=5.0\ \text{kg}$: $x_\text{cm}=\dfrac{1+6-4}{5}=0.60\ \text{m}$, $y_\text{cm}=\dfrac{2-2+8}{5}=1.6\ \text{m}$; so $(0.60,\,1.6)\ \text{m}$.
3 $r=\dfrac{5.0}{8.0}\times0.80=0.50\ \text{m}$ (and $0.30\ \text{m}$ from the $5.0\ \text{kg}$ particle).
4 $r_\text{C}=\dfrac{16}{28}\times0.113=0.0646\ \text{nm}=6.46\times10^{-11}\ \text{m}$.
5 At the centroid, which is $\dfrac{a}{\sqrt3}=\dfrac{0.30}{1.732}=0.17\ \text{m}$ from each corner.
6 $M=10\ \text{kg}$: $x_\text{cm}=\dfrac{0+2+3+0}{10}=0.50\ \text{m}$, $y_\text{cm}=\dfrac{0+0+3+4}{10}=0.70\ \text{m}$.
7 Need $\sum m_i\Delta x_i=0$: $6.0(-0.50)+4.0\,\Delta x=0$, so $\Delta x=+0.75\ \text{m}$ — towards the $6.0\ \text{kg}$ particle.
8 Shift the origin so every position becomes $x_i'=x_i-a$. Then $x_\text{cm}'=\dfrac{m_1(x_1-a)+m_2(x_2-a)}{m_1+m_2}=x_\text{cm}-a$: the new coordinate of the same point. The point itself is unchanged.
II
Centre of mass of rigid and composite bodies.
  • 1 A $3.0\ \text{kg}$ rod $2.0\ \text{m}$ long carries a $1.0\ \text{kg}$ point mass at one end. Find the distance of the centre of mass from the other end.
  • 2 A rod of length $1.5\ \text{m}$ has linear density $\lambda=kx$, measured from one end. Find its centre of mass.
  • 3 A thin uniform wire is bent into a semicircle of radius $0.21\ \text{m}$. Find the distance of its centre of mass from the centre of the circle.
  • 4 Find the distance of the centre of mass of a uniform semicircular plate of radius $0.15\ \text{m}$ from the midpoint of its straight edge.
  • 5 An L-shaped plate is made of three identical square tiles of side $1.0\ \text{m}$ occupying $0\le x\le2,\ 0\le y\le1$ and $0\le x\le1,\ 1\le y\le2$. Find its centre of mass.
  • 6 A hole of radius $0.10\ \text{m}$ is cut from a uniform disc of radius $0.30\ \text{m}$, the hole's centre being $0.15\ \text{m}$ from the disc's centre. Find the shift of the centre of mass, in cm.
  • 7 A uniform solid cone is $24\ \text{cm}$ high. How far is its centre of mass from (a) the base, (b) the apex?
  • 8 Two uniform rods, each $1.0\ \text{m}$ long and $1.0\ \text{kg}$, form a letter T: the stem hangs from the middle of the cross-bar. How far below the cross-bar is the centre of mass?
  • 9 A uniform wire $1.2\ \text{m}$ long is bent at its midpoint into a right angle. How far is its centre of mass from the corner?
1 Rod: $3.0\ \text{kg}$ at $1.0\ \text{m}$; point mass $1.0\ \text{kg}$ at $2.0\ \text{m}$. $x=\dfrac{3.0+2.0}{4.0}=1.25\ \text{m}$.
2 $x_\text{cm}=\dfrac{\int_0^Lkx^2dx}{\int_0^Lkx\,dx}=\dfrac23L=1.0\ \text{m}$ from the light end.
3 $\dfrac{2R}{\pi}=\dfrac{0.42}{3.142}=0.134\ \text{m}$, on the axis of symmetry.
4 $\dfrac{4R}{3\pi}=\dfrac{0.60}{9.425}=0.0637\ \text{m}$ (about $6.4\ \text{cm}$).
5 Tile centres $(0.5,0.5)$, $(1.5,0.5)$, $(0.5,1.5)$, equal masses: $x_\text{cm}=y_\text{cm}=\dfrac{2.5}{3}=0.83\ \text{m}$ — on the line of symmetry $y=x$.
6 Masses $\propto r^2$: hole $=\tfrac19$ of the disc. Shift $=\dfrac{\tfrac19\times0.15}{\tfrac89}=\dfrac{0.15}{8}=0.019\ \text{m}=1.9\ \text{cm}$ away from the hole.
7 (a) $h/4=6.0\ \text{cm}$ above the base; (b) $18\ \text{cm}$ below the apex.
8 Cross-bar's centre at the junction ($0$); stem's centre $0.50\ \text{m}$ below. $y=\dfrac{1.0(0)+1.0(0.50)}{2.0}=0.25\ \text{m}$ below the cross-bar.
9 Two $0.60\ \text{m}$ arms along the axes, centres at $(0.30,0)$ and $(0,0.30)$: centre of mass $(0.15,0.15)\ \text{m}$, a distance $0.15\sqrt2=0.21\ \text{m}$ from the corner — outside the wire.
III
Motion of the centre of mass.
  • 1 A $2.0\ \text{kg}$ particle moves at $4.0\ \text{m/s}$ along $+x$ and a $3.0\ \text{kg}$ particle at $1.0\ \text{m/s}$ along $+y$. Find the speed of their centre of mass.
  • 2 Two blocks of $1.0\ \text{kg}$ and $3.0\ \text{kg}$ on a smooth floor are joined by a stretched spring that pulls them together with $5.0\ \text{N}$. A force of $6.0\ \text{N}$ east acts on the first and $2.0\ \text{N}$ west on the second. Find the acceleration of the centre of mass.
  • 3 Skaters of $50\ \text{kg}$ and $70\ \text{kg}$ stand $12\ \text{m}$ apart on frictionless ice and pull on a rope until they meet. How far does the $50\ \text{kg}$ skater move?
  • 4 A $70\ \text{kg}$ man walks from one end to the other of a $3.0\ \text{m}$, $30\ \text{kg}$ plank lying on frictionless ice. How far does the plank move?
  • 5 A $3.0\ \text{kg}$ ball moving at $5.0\ \text{m/s}$ hits a $2.0\ \text{kg}$ ball at rest on a smooth floor. Find the velocity of the centre of mass before and after the collision.
  • 6 A shell is fired at $30\ \text{m/s}$ at $53^\circ$ to the horizontal ($\sin53^\circ=0.8$, $g=10\ \text{m/s}^2$). At the top it splits into two equal halves; one half flies straight back along the path with the speed the shell had. Where does the other half land?
  • 7 A $4.0\ \text{kg}$ bomb at rest explodes into three pieces. Two $1.0\ \text{kg}$ pieces fly off at right angles to each other with speeds $12\ \text{m/s}$ and $16\ \text{m/s}$. Find the speed of the $2.0\ \text{kg}$ piece.
  • 8 A $60\ \text{kg}$ man is on a rope ladder hanging from a balloon of total mass $240\ \text{kg}$, all at rest in the air. He climbs $5.0\ \text{m}$ up the ladder. How far, and which way, does the balloon move?
1 $\mathbf{v}_\text{cm}=\dfrac{2.0(4.0\,\hat{\mathbf{i}})+3.0(1.0\,\hat{\mathbf{j}})}{5.0}=(1.6\,\hat{\mathbf{i}}+0.60\,\hat{\mathbf{j}})\ \text{m/s}$; speed $\sqrt{2.56+0.36}=1.71\ \text{m/s}$.
2 The spring force is internal and drops out: $a_\text{cm}=\dfrac{6.0-2.0}{4.0}=1.0\ \text{m/s}^2$ east.
3 They meet at the centre of mass, $\dfrac{70}{120}\times12=7.0\ \text{m}$ from the $50\ \text{kg}$ skater.
4 $\Delta x_\text{plank}=\dfrac{70}{100}\times3.0=2.1\ \text{m}$, opposite to his walk (he moves only $0.90\ \text{m}$ over the ice).
5 $v_\text{cm}=\dfrac{3.0\times5.0}{5.0}=3.0\ \text{m/s}$ — the same after the collision, since the collision forces are internal.
6 $u_x=18\ \text{m/s}$, $u_y=24\ \text{m/s}$: range $R=\dfrac{2u_xu_y}{g}=86.4\ \text{m}$, top at $43.2\ \text{m}$. The returning half lands at $0$; both land together, so $\dfrac{0+x}{2}=86.4$ and $x=173\ \text{m}$. (Its speed after the burst is $54\ \text{m/s}$: $m(18)=\tfrac m2(-18)+\tfrac m2v$.)
7 Momentum of the two light pieces: $\sqrt{12^2+16^2}=20\ \text{kg m/s}$. The third piece carries $20\ \text{kg m/s}$ the opposite way: $v=\dfrac{20}{2.0}=10\ \text{m/s}$.
8 The centre of mass stays still (the buoyant force balances the total weight, so no net external force): the balloon moves down by $\dfrac{60}{300}\times5.0=1.0\ \text{m}$; the man rises $4.0\ \text{m}$.
IV
Harder problems and applications.
  • 1 A rod of length $2.0\ \text{m}$ has density $\lambda=\lambda_0x^2$, with $x$ measured from one end. Find its centre of mass.
  • 2 A spherical cavity of radius $7.0\ \text{cm}$ is hollowed out of a uniform solid sphere of radius $14\ \text{cm}$; the cavity touches the surface. Find the shift of the centre of mass.
  • 3 A $2.0\ \text{kg}$ block slides from the top to the bottom of the smooth sloping face of an $8.0\ \text{kg}$ wedge, which rests on a smooth floor. The base of the slope is $1.0\ \text{m}$ long. How far does the wedge move?
  • 4 Masses of $3.0\ \text{kg}$ and $5.0\ \text{kg}$ hang over a light smooth pulley and are released. Find the acceleration of their centre of mass, and its direction.
  • 5 A $4.0\ \text{kg}$ shell moving horizontally at $30\ \text{m/s}$ explodes into a $1.0\ \text{kg}$ piece that moves vertically upward at $60\ \text{m/s}$ and a $3.0\ \text{kg}$ piece. Find the speed and direction of the $3.0\ \text{kg}$ piece.
  • 6 (Modelling) An $800\ \text{kg}$ cannon on smooth rails fires a $10\ \text{kg}$ shell horizontally at $400\ \text{m/s}$. Find the recoil speed, and show that $2.0\ \text{s}$ later (ignoring the shell's fall) the centre of mass of cannon + shell is still at the firing point.
  • 7 (Modelling) Using Example 1, the Earth's centre circles the Earth–Moon centre of mass at radius $4670\ \text{km}$ once every $27.3$ days. Find the speed of this wobble.
1 $x_\text{cm}=\dfrac{\int_0^Lx^3dx}{\int_0^Lx^2dx}=\dfrac{L^4/4}{L^3/3}=\dfrac34L=1.5\ \text{m}$.
2 Masses $\propto r^3$: cavity $=\tfrac18M$, centre $7.0\ \text{cm}$ from $O$. Shift $=\dfrac{\tfrac18\times7.0}{\tfrac78}=1.0\ \text{cm}$ away from the cavity (in general $R/14$).
3 No horizontal external force: the block moves $1.0\ \text{m}$ horizontally relative to the wedge, so the wedge moves $\dfrac{2.0}{10}\times1.0=0.20\ \text{m}$ the opposite way.
4 $a=\dfrac{(5.0-3.0)g}{8.0}=2.45\ \text{m/s}^2$ (5 kg down, 3 kg up). $a_\text{cm}=\dfrac{5.0a-3.0a}{8.0}=0.613\ \text{m/s}^2$ downward $\left(=g\left(\tfrac{m_2-m_1}{m_1+m_2}\right)^2\right)$. External check: $(8.0g-2T)/8.0$ with $T=36.75\ \text{N}$ gives the same.
5 $\mathbf{P}=120\,\hat{\mathbf{i}}$; $3.0\,\mathbf{v}=120\,\hat{\mathbf{i}}-60\,\hat{\mathbf{j}}$, so $\mathbf{v}=(40\,\hat{\mathbf{i}}-20\,\hat{\mathbf{j}})\ \text{m/s}$: $44.7\ \text{m/s}$ at $\tan^{-1}0.5=26.6^\circ$ below the horizontal.
6 $800V=10\times400$, so $V=5.0\ \text{m/s}$ backwards. After $2.0\ \text{s}$: shell at $+800\ \text{m}$, cannon at $-10\ \text{m}$; $x_\text{cm}=\dfrac{10(800)+800(-10)}{810}=0$ ✓.
7 $v=\dfrac{2\pi r}{T}=\dfrac{2\pi\times4.67\times10^6}{27.3\times86400}=12\ \text{m/s}$.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ A rod of length $L$ lies along the $x$-axis from $x=0$ to $x=L$; its linear mass density is $\lambda=\lambda_0\left(1+\dfrac{2x}{L}\right)$. The centre of mass of the rod is at $x=$ (A) $\dfrac L2$ (B) $\dfrac{2L}{3}$ (C) $\dfrac{7L}{12}$ (D) $\dfrac{5L}{9}$

Mass $M=\lambda_0\displaystyle\int_0^L\left(1+\frac{2x}{L}\right)dx=\lambda_0(L+L)=2\lambda_0L$.
Moment $\lambda_0\displaystyle\int_0^L\left(x+\frac{2x^2}{L}\right)dx=\lambda_0\left(\frac{L^2}{2}+\frac{2L^2}{3}\right)=\frac76\lambda_0L^2$, so $x_\text{cm}=\dfrac{7L}{12}$.
Answer (C).
⏱ Shortcut A linear density is a uniform part plus a $\lambda\propto x$ part: here masses $\lambda_0L$ at $\tfrac L2$ and $\lambda_0L$ at $\tfrac{2L}{3}$. Average: $\tfrac12\left(\tfrac L2+\tfrac{2L}3\right)=\tfrac{7L}{12}$. (D) is the answer for $1+x/L$.

E2. JEE Main · Numerical A $50\ \text{kg}$ girl stands at one end of a $150\ \text{kg}$ boat $6.0\ \text{m}$ long, at rest on still water. She walks to the middle of the boat. Neglecting the resistance of the water, find the distance (in cm) moved by the boat. Give the answer to the nearest integer.

Idea No horizontal external force and the system starts at rest, so the centre of mass of girl + boat stays fixed.
Distance She walks $3.0\ \text{m}$ relative to the boat: $\Delta x_\text{boat}=\dfrac{50}{200}\times3.0=0.75\ \text{m}$.
Answer $75$.
⏱ Shortcut "To the middle" means half the length — the common slip is to use $6.0\ \text{m}$ and get $150$.

E3. JEE Main · MCQ A shell of mass $3m$ fired from level ground would have a horizontal range $R$. At the highest point of its path it splits into two pieces of masses $m$ and $2m$. The piece of mass $m$ has zero velocity just after the explosion and falls vertically. Neglecting air resistance, the piece of mass $2m$ lands at a distance from the gun of (A) $\dfrac{3R}{2}$ (B) $\dfrac{5R}{4}$ (C) $2R$ (D) $\dfrac{7R}{4}$

Idea Both pieces start at the top with zero vertical velocity, so they land at the same instant, and the centre of mass lands at $R$.
Equation $m\cdot\dfrac R2+2m\,x=3m\,R$, so $x=\dfrac{3R-R/2}{2}=\dfrac{5R}{4}$.
Answer (B).
⏱ Shortcut (A) is the answer for two equal pieces; with the heavier piece going on, it lands nearer.

E4. JEE Main · Numerical A spherical cavity of radius $21\ \text{cm}$ is made inside a uniform solid sphere of radius $42\ \text{cm}$, the cavity touching the surface of the sphere. Find the distance (in cm) of the centre of mass of the remaining body from the centre of the original sphere. Give the answer to the nearest integer.

Masses Mass $\propto$ volume $\propto r^3$: the cavity is $\left(\tfrac12\right)^3=\tfrac18$ of the sphere; its centre is $21\ \text{cm}$ from $O$.
Shift $x=\dfrac{\tfrac18M\times21}{M-\tfrac18M}=\dfrac{21}{7}=3\ \text{cm}$, on the side away from the cavity.
Answer $3$.
⏱ Shortcut Cavity of radius $R/2$ touching the surface: shift $R/14$ (for a disc with a hole of radius $R/2$ it is $R/6$). Using $r^2$ here would give $7$.

E5. JEE Main · MCQ Blocks of masses $m$ and $3m$ hang from the ends of a light string over a light frictionless pulley and are released from rest. The acceleration of the centre of mass of the two blocks is (A) $\dfrac g2$ (B) $\dfrac g8$ (C) zero (D) $\dfrac g4$

Blocks $a=\dfrac{(3m-m)g}{4m}=\dfrac g2$: $3m$ down, $m$ up.
Centre of mass $a_\text{cm}=\dfrac{3m\cdot\tfrac g2-m\cdot\tfrac g2}{4m}=\dfrac g4$, downward.
Answer (D).
⏱ Shortcut $a_\text{cm}=g\left(\dfrac{m_2-m_1}{m_1+m_2}\right)^2=g\left(\tfrac12\right)^2$. It is not zero: the pulley's upward force $2T=3mg$ is less than the total weight $4mg$.

E6. JEE Main · Numerical A $6\ \text{kg}$ bomb at rest explodes into three pieces. A $1\ \text{kg}$ piece flies east at $24\ \text{m/s}$ and a $2\ \text{kg}$ piece flies north at $9\ \text{m/s}$. Find the speed (in m/s) of the $3\ \text{kg}$ piece. Give the answer to the nearest integer.

Momentum Total momentum stays zero: $\mathbf{p}_3=-(24\,\hat{\mathbf{i}}+18\,\hat{\mathbf{j}})\ \text{kg m/s}$.
Speed $p_3=\sqrt{24^2+18^2}=30\ \text{kg m/s}$, so $v_3=\dfrac{30}{3}=10\ \text{m/s}$ (towards the south-west).
Answer $10$.
⏱ Shortcut Add momenta, not velocities: $(24,18)$ is a $3$–$4$–$5$ triangle scaled by $6$, giving $30$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. Can you predict the centre of mass of an irregular flat object from measurements and the composite-body method — and how close does the prediction come to the point found by hanging the object?

Why it matters. Aircraft are loaded so that the centre of mass stays inside a narrow safe range; a truck, a racing car or a crane is designed to keep its centre of mass low and between its wheels; prosthetic limbs and sports equipment are balanced by moving their centre of mass. In biomechanics, the centre of mass of the human body is estimated from tables of segment masses and positions — exactly the "sum of $m_ix_i$" method — and compared with force-plate measurements.

What to do.

  1. Cut an irregular shape from stiff cardboard: for example an L or a T made of rectangles, with a circular hole cut out of one arm.
  2. Predict the centre of mass: split it into rectangles (positive mass) and the hole (negative mass), measure each piece's area and centre with a ruler on graph paper, and use $x_\text{cm}=\sum A_ix_i/\sum A_i$.
  3. Find it experimentally: make two small holes near the edge, hang the shape from a pin through each in turn with a plumb line (thread and a small weight), and mark the vertical lines. Their crossing point is the centre of gravity.
  4. Repeat with a third hanging point as a check, and measure the distance between predicted and measured points.
  5. Tape a coin to one corner and predict, then measure, how far the centre of mass shifts.

Tools: Cardboard, scissors, graph paper, ruler, pin, thread and a small weight, a coin, kitchen scale (optional, to check that mass is proportional to area).

Hand in: A labelled sketch with both points marked; your calculation table ($A_i$, $x_i$, $y_i$); the measured discrepancy in mm with a sentence on its causes.

Going further. Estimate your own centre of mass when standing by lying on a plank supported on two bathroom scales: the readings give the position by the principle of moments (Section 5.2). Raise your arms above your head and measure how far it moves.

Instructor note: with careful cutting, predictions typically agree with the plumb-line point within 2–4 mm on a 20 cm shape; the main errors are non-uniform card thickness and the width of the pencil lines. The coin step makes the "nearer the heavier mass" rule tangible. The plank-and-scales extension usually puts the centre of mass of a standing adult at about 55–57% of the height, rising by a few cm when the arms are raised.

🧪 Self-check quiz

0/5 correct

Q1. The centre of mass of a uniform semicircular wire of radius $R$ lies on its axis of symmetry at a distance from the centre of

Q2. A man walks from one end of a boat to the other on still, frictionless water. The centre of mass of the man–boat system

Q3. Internal forces between the particles of a system can change

Q4. Which statement about the centre of mass of a rigid body is correct?

Q5. Particles of masses $m$ and $2m$ are a distance $d$ apart. The distance of their centre of mass from the particle of mass $m$ is