Chapter 5 · Rotational Motion

5.2 Torque, Angular Momentum and Equilibrium

A force turns a body about a point by its torque $\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F}$; torque changes angular momentum, $\boldsymbol{\tau}=d\mathbf{L}/dt$. With no external torque $\mathbf{L}$ is conserved — why skaters spin faster — and a rigid body is in equilibrium only when both the net force and the net torque vanish.

Try to open a heavy door by pushing right next to its hinges: it barely moves. Push the same amount at the handle, and it swings open easily. Push at the handle but straight towards the hinges, and nothing happens at all. What turns the door is not the force alone but the force together with where and in which direction it is applied. The same idea explains why a spanner has a long handle, why a see-saw balances a light child far from the pivot against a heavy adult close to it, and why a ladder leaning on a wall can suddenly slide out at the foot when you climb too high.

In Section 5.1 we saw that the centre of mass of a body moves as if all the external forces acted there. But a rigid body can also rotate: a wheel spins, a door swings, a thrown hammer tumbles. A rigid body's motion is, in general, a translation of its centre of mass combined with a rotation about an axis; when one axis is held fixed (a door's hinges, a wheel's axle) the body can only rotate, every particle moving on a circle about that axis with the same angular velocity $\omega$ (see Section 2.4). In this section we build the rotational partners of force and momentum — torque and angular momentum — prove that torque changes angular momentum just as force changes momentum, use the conservation of angular momentum, and finish with the two conditions for a rigid body to stay in equilibrium. We use the vector product from Section 2.2 throughout.

Moment of a force: torque

Fix a reference point $O$ (often a pivot or a hinge). A force $\mathbf{F}$ acts at a point $P$ whose position vector from $O$ is $\mathbf{r}$. Experiments with levers and doors show that the turning effect grows in proportion to $F$, in proportion to the distance of the line of the force from $O$, and vanishes when the force points through $O$. All of this is captured by one vector product.

📘 Definition 5.4 — Torque (moment of a force)

The torque (or moment) of a force $\mathbf{F}$ acting at a point with position vector $\mathbf{r}$ about the point $O$ is

$$\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F},$$ $$\tau=rF\sin\theta=F\,r_\perp=r\,F_\perp ,$$

where $\theta$ is the angle between $\mathbf{r}$ and $\mathbf{F}$. Here $r_\perp=r\sin\theta$ is the moment arm (lever arm) — the perpendicular distance from $O$ to the line of action of the force — and $F_\perp=F\sin\theta$ is the component of the force perpendicular to $\mathbf{r}$. The direction of $\boldsymbol{\tau}$ is perpendicular to both $\mathbf{r}$ and $\mathbf{F}$, given by the right-hand rule. Unit: $\text{N m}$ (not written as joule); dimensions $[\text{ML}^2\text{T}^{-2}]$.

Three things to notice. (i) A force whose line of action passes through $O$ has zero moment arm and zero torque — like pushing a door towards its hinges. (ii) Sliding a force along its own line of action does not change its torque, because $r_\perp$ does not change. (iii) Torque depends on the reference point: always say "torque about $O$". In a plane problem every torque points along $\pm\hat{\mathbf{k}}$, so we can treat it as a signed number — positive for anticlockwise turning, negative for clockwise — and in components

$$\tau_z=xF_y-yF_x .$$

In three dimensions expand the determinant:

$$\begin{aligned}\tau_x&=yF_z-zF_y,\\ \tau_y&=zF_x-xF_z,\\ \tau_z&=xF_y-yF_x .\end{aligned}$$

Torque about an axis. For a body that can only turn about a fixed axis (say the $z$-axis through $O$), only the component of $\boldsymbol{\tau}$ along that axis, $\tau_z$, can turn it; the other components merely press on the bearings. A force parallel to the axis, or one cutting through the axis, has zero torque about it.

📘 Definition 5.5 — Couple of forces

A couple of forces is a pair of equal and opposite forces, $\mathbf{F}$ and $-\mathbf{F}$, whose lines of action are parallel but separated by a perpendicular distance $d$. Its net force is zero, but its torque is

$$\tau=Fd,$$

the same about every point. A couple produces pure rotation without translation — turning a tap, a steering wheel, or a compass needle in a uniform field.

Proof that a couple's torque does not depend on the point: let the forces act at $\mathbf{r}_1$ and $\mathbf{r}_2$. About any point, $\mathbf{r}_1\times\mathbf{F}+\mathbf{r}_2\times(-\mathbf{F})=(\mathbf{r}_1-\mathbf{r}_2)\times\mathbf{F}$, and $\mathbf{r}_1-\mathbf{r}_2$ is the same whatever origin you pick. More generally, whenever the net force is zero, the net torque is the same about every point — a fact we use for equilibrium.

✏️ Example 1 — Torque as a vector product
A force $\mathbf{F}=(3\,\hat{\mathbf{i}}-\hat{\mathbf{j}}+2\,\hat{\mathbf{k}})\ \text{N}$ acts at the point $\mathbf{r}=(\hat{\mathbf{i}}+2\,\hat{\mathbf{j}}-\hat{\mathbf{k}})\ \text{m}$. (a) Find its torque about the origin and the magnitude. (b) Check that $\boldsymbol{\tau}$ is perpendicular to $\mathbf{r}$ and to $\mathbf{F}$. (c) Find the torque about the point $(1,0,1)\ \text{m}$.
(a) $\tau_x=yF_z-zF_y=2(2)-(-1)(-1)=3$; $\tau_y=zF_x-xF_z=(-1)(3)-1(2)=-5$; $\tau_z=xF_y-yF_x=1(-1)-2(3)=-7$. So $\boldsymbol{\tau}=(3\,\hat{\mathbf{i}}-5\,\hat{\mathbf{j}}-7\,\hat{\mathbf{k}})\ \text{N m}$ and $\tau=\sqrt{9+25+49}=\sqrt{83}=9.1\ \text{N m}$.
(b) $\boldsymbol{\tau}\cdot\mathbf{r}=3-10+7=0$ and $\boldsymbol{\tau}\cdot\mathbf{F}=9+5-14=0$ ✓ — as every vector product must be.
(c) Use the position relative to the new point: $\mathbf{r}'=\mathbf{r}-(1,0,1)=(0,2,-2)\ \text{m}$. Then $\tau'_x=2(2)-(-2)(-1)=2$, $\tau'_y=(-2)(3)-0=-6$, $\tau'_z=0-2(3)=-6$, so $\boldsymbol{\tau}'=(2\,\hat{\mathbf{i}}-6\,\hat{\mathbf{j}}-6\,\hat{\mathbf{k}})\ \text{N m}$.
Lesson The same force has different torques about different points. Always measure $\mathbf{r}$ from the reference point to the point of application.

A door handle is $0.80\ \text{m}$ from the hinge line. A horizontal force of $10\ \text{N}$ is applied at the handle at $30^\circ$ to the plane of the door. The torque about the hinge is

Angular momentum

Force changes linear momentum, $\mathbf{F}=d\mathbf{p}/dt$. The rotational partner of torque must be the "moment of momentum".

📘 Definition 5.6 — Angular momentum of a particle

A particle of mass $m$ with momentum $\mathbf{p}=m\mathbf{v}$, at position $\mathbf{r}$ from a point $O$, has angular momentum about $O$

$$\mathbf{L}=\mathbf{r}\times\mathbf{p},\qquad L=rp\sin\theta=p\,r_\perp ,$$

where $r_\perp$ is the perpendicular distance from $O$ to the line of the velocity. Unit $\text{kg m}^2/\text{s}$ ($=\text{J s}$); dimensions $[\text{ML}^2\text{T}^{-1}]$, the same as Planck's constant.

Two important special cases. (i) A particle on a circle of radius $r$ about $O$ at speed $v$: $\mathbf{r}\perp\mathbf{v}$, so $L=mvr=mr^2\omega$, along the axis by the right-hand rule. (ii) A particle moving in a straight line at constant velocity: $r_\perp$ is the fixed distance $d$ of the line from $O$, so $L=mvd$ is constant — non-zero, even though the particle is not "going round" anything — and it is zero only about points on the line itself.

Rigid body about a fixed axis. Every particle of a rigid body rotating about a fixed axis with angular velocity $\omega$ moves on a circle of radius $r_i$ about the axis, so its angular momentum along the axis is $m_ir_i^2\omega$. Adding up,

$$L=\Big(\sum m_ir_i^2\Big)\omega=I\omega ,$$

where $I=\sum m_ir_i^2$ is the moment of inertia about the axis — the subject of Section 5.3. For now, $I$ simply measures how much mass there is and how far from the axis it sits: moving mass outwards increases $I$.

Torque changes angular momentum. Differentiate $\mathbf{L}=\mathbf{r}\times\mathbf{p}$ using the product rule (keeping the order in the cross products):

$$\begin{aligned}\frac{d\mathbf{L}}{dt}&=\frac{d\mathbf{r}}{dt}\times\mathbf{p}+\mathbf{r}\times\frac{d\mathbf{p}}{dt}\\ &=\mathbf{v}\times m\mathbf{v}+\mathbf{r}\times\mathbf{F}=\boldsymbol{\tau},\end{aligned}$$

since $\mathbf{v}\times\mathbf{v}=\mathbf{0}$. For a system of particles, add the equations: internal forces come in equal and opposite pairs along the line joining the two particles, so their torques cancel in pairs as well. Only external torques remain.

📐 Law 5.6 — Torque and angular momentum

For a particle, and for any system of particles with total angular momentum $\mathbf{L}$ about a fixed point $O$ (or about the centre of mass),

$$\boldsymbol{\tau}_\text{ext}=\frac{d\mathbf{L}}{dt},$$

where $\boldsymbol{\tau}_\text{ext}$ is the total torque of the external forces about the same point. (This assumes internal forces act along the lines joining the particles, as gravitational, electric and contact forces do.) For rotation about a fixed axis, $\tau_\text{ext}=\dfrac{d(I\omega)}{dt}$; and a torque acting for a time changes the angular momentum by the angular impulse $\int\boldsymbol{\tau}\,dt=\Delta\mathbf{L}$.

✏️ Example 2 — Angular momentum of a projectile
A $0.20\ \text{kg}$ ball is thrown from the origin $O$ at $20\ \text{m/s}$, $37^\circ$ above the horizontal ($\sin37^\circ=0.6$; take $g=10\ \text{m/s}^2$). (a) Find its angular momentum about $O$ at the highest point. (b) Show that in general $L=\tfrac12mgu_xt^2$ about $O$. (c) Verify $\tau=dL/dt$ at the highest point.
Find the angular momentum at the highest point before you open the solution:
Numbers $u_x=16\ \text{m/s}$, $u_y=12\ \text{m/s}$; top at $t=1.2\ \text{s}$, height $H=\dfrac{u_y^2}{2g}=7.2\ \text{m}$.
(a) At the top $\mathbf{v}$ is horizontal and its line is $H$ above $O$: $L=mu_xH=0.20\times16\times7.2=23\ \text{kg m}^2/\text{s}$, directed into the page (clockwise sense) for a ball moving to the right.
(b) $L_z=xp_y-yp_x$ $=m\big[u_xt(u_y-gt)-(u_yt-\tfrac12gt^2)u_x\big]$ $=-\tfrac12mgu_xt^2$. Its magnitude $\tfrac12mgu_xt^2$ grows from zero; at $t=1.2\ \text{s}$: $\tfrac12(0.20)(10)(16)(1.44)=23\ \text{kg m}^2/\text{s}$ ✓.
(c) $\dfrac{dL}{dt}=mgu_xt=0.20\times10\times16\times1.2=38.4\ \text{N m}$. Torque of gravity about $O$: weight $mg=2.0\ \text{N}$ times moment arm $x=19.2\ \text{m}$ $=38.4\ \text{N m}$ ✓.
Lesson Gravity has a torque about the launch point, so $\mathbf{L}$ about $O$ is not conserved for a projectile — though it would be about a point the weight passes through.

A particle moves at constant velocity along the straight line $y=3\ \text{m}$ in the $xy$-plane. Its angular momentum about the origin

Conservation of angular momentum and its applications

If the net external torque on a system is zero, Law 5.6 says $d\mathbf{L}/dt=\mathbf{0}$.

📐 Law 5.7 — Conservation of angular momentum

If the total external torque on a system about a point (or an axis) is zero, the total angular momentum of the system about that point (or axis) stays constant:

$$\boldsymbol{\tau}_\text{ext}=\mathbf{0}\ \Rightarrow\ \mathbf{L}=\text{constant}.$$

For a body or system rotating about a fixed axis whose moment of inertia changes because its parts move: $I_1\omega_1=I_2\omega_2$. Kinetic energy is not conserved in general: $K=\tfrac12I\omega^2=\dfrac{L^2}{2I}$, so it rises when $I$ falls and vice versa.

Applications.

✏️ Example 3 — The spinning skater
A skater spins at $1.5\ \text{rev/s}$ with her arms stretched out; her moment of inertia is then $3.6\ \text{kg m}^2$. She pulls her arms in, reducing it to $1.2\ \text{kg m}^2$. Ignore friction with the ice. (a) Find her new rate of spin. (b) Find her kinetic energy before and after. (c) Where does the extra energy come from?
Why conserved The ice pushes up and gravity pulls down along the vertical spin axis: no torque about that axis. So $I\omega$ is constant.
(a) $\omega_2=\dfrac{I_1}{I_2}\omega_1=\dfrac{3.6}{1.2}\times1.5=4.5\ \text{rev/s}$ (rev/s may be used on both sides — the ratio needs no conversion).
(b) In rad/s, $\omega_1=3\pi$, $\omega_2=9\pi$. $K_1=\tfrac12(3.6)(3\pi)^2=160\ \text{J}$; $K_2=\tfrac12(1.2)(9\pi)^2=480\ \text{J}$ — three times as much, since $K=L^2/2I$.
(c) Her muscles do $480-160=320\ \text{J}$ of work pulling her arms inward against their tendency to fly outward.
Check $L=I\omega=3.6\times3\pi=1.2\times9\pi=34\ \text{kg m}^2/\text{s}$ both times ✓.
✏️ Example 4 — Dropping a disc onto a spinning turntable
A turntable ($I_1=0.30\ \text{kg m}^2$) spins freely at $40\ \text{rad/s}$. A disc ($I_2=0.10\ \text{kg m}^2$ about the same axis), not rotating, is dropped onto it, coaxially; friction soon makes them turn together. (a) Find the common angular velocity. (b) Find the kinetic energy lost and the fraction lost.
Find the common angular velocity first:
(a) $I_1\omega_1=(I_1+I_2)\omega$: $\omega=\dfrac{0.30\times40}{0.40}=30\ \text{rad/s}$.
Energies Before: $\tfrac12(0.30)(40)^2=240\ \text{J}$. After: $\tfrac12(0.40)(30)^2=180\ \text{J}$.
(b) Loss $=60\ \text{J}$, i.e. $25\%$ — turned into heat by the friction that brought the two to a common speed.
⏱ Shortcut Fraction lost $=\dfrac{I_2}{I_1+I_2}=\dfrac{0.10}{0.40}=\dfrac14$ (when the second body starts at rest) — the rotational copy of a perfectly inelastic collision.

In the widget the spinner turns at $1.0\ \text{rev/s}$ with the two masses at $r=0.80\ \text{m}$. If the masses are pulled in to $r=0.20\ \text{m}$, how fast will it spin?

Keep $\omega_0=1.0\ \text{rev/s}$ and move the slider from $r=0.80$ to $0.20\ \text{m}$: the readouts show $I$ falling from $4.20$ to $1.20\ \text{kg m}^2$, $\omega$ rising from $1.00$ to $3.50\ \text{rev/s}$, $L$ fixed at $26.4\ \text{kg m}^2/\text{s}$, and $K$ rising from $82.9$ to $290\ \text{J}$. The body's own $I_0=1.0\ \text{kg m}^2$ does not change, so $I$ does not scale as $r^2$: $\omega_2=\dfrac{1.0+5(0.64)}{1.0+5(0.04)}\times1.0=3.5\ \text{rev/s}$, not $16$ (which ignores the body) or $4$ (the ratio of radii).
Interactive 1 — The Spinning Stool: Pull In, Spin Up

A person on a frictionless spinning stool ($I_0=1.0\ \text{kg m}^2$) holds two $2.5\ \text{kg}$ masses at distance $r$ from the axis, so $I=I_0+2mr^2$. No external torque acts, so $L=I\omega$ never changes. Set the starting spin $\omega_0$ (at $r=0.80\ \text{m}$) and drag $r$, or press Play to move the arms in and out. The bars compare $L$ (constant) and kinetic energy (not!).

0.80 m1.0 rev/s
moment of inertia $I$—
spin $\omega$—
angular momentum $L$—
kinetic energy $K$—

A disc spinning at $\omega$ about its axis has an identical, non-rotating disc placed gently on it, coaxially. When they turn together, the fraction of the original kinetic energy that has been lost is

Equilibrium of rigid bodies

A particle is in equilibrium when the net force on it is zero (Section 3.1). A rigid body needs more: two equal and opposite forces that are not in line — a couple — have zero net force, yet they set the body spinning. Equilibrium of a rigid body therefore has two parts, one for each kind of motion.

📐 Law 5.8 — Conditions for equilibrium of a rigid body

A rigid body is in (mechanical) equilibrium — its centre of mass has no acceleration and its angular momentum does not change — if and only if

$$\text{(1) translational: }\ \sum\mathbf{F}_\text{ext}=\mathbf{0},\qquad\text{(2) rotational: }\ \sum\boldsymbol{\tau}_\text{ext}=\mathbf{0}\ \text{about any one point}.$$

When (1) holds, the net torque is the same about every point, so (2) may be checked about whichever point is most convenient. A body at rest that satisfies both stays at rest (static equilibrium). For forces in a plane this gives three scalar equations: $\sum F_x=0$, $\sum F_y=0$, $\sum\tau_z=0$.

Weight acts at the centre of gravity. In a uniform field the weights of all the particles have the same total torque as the single force $M\mathbf{g}$ acting at the centre of mass (Definition 5.3 in Section 5.1). So a uniform beam's weight acts at its middle.

The principle of moments. For a lever or a beam balanced on a pivot, condition (2) about the pivot reads: sum of anticlockwise moments = sum of clockwise moments. This is how a metre rule balanced on a knife-edge can be used to find an unknown mass (one of the JEE Main experiments): hang the unknown mass on one side and a known mass on the other, move them until the rule balances, and equate moments — remembering the rule's own weight acting at its $50\ \text{cm}$ mark if the knife-edge is elsewhere.

📐 Result 5.9 — Three-force equilibrium

If a rigid body is in equilibrium under exactly three non-parallel forces, their lines of action pass through a single point (they are concurrent), and the forces form a closed triangle — so Lami's theorem of Section 3.1 applies. (Take torques about the meeting point of two of them: the third must have zero torque there too.)

🧭 Problem-solving strategy — Static equilibrium of a rigid body
  1. Draw the body and every external force at its point of action: weight at the centre of gravity, normal forces perpendicular to smooth surfaces, friction along rough ones, tensions along strings, and a hinge force (two unknown components) at a hinge.
  2. Write $\sum F_x=0$ and $\sum F_y=0$.
  3. Take torques about the point where the most unknown forces act — they drop out of the torque equation. Use $\tau=F\,r_\perp$ with a sign for clockwise/anticlockwise.
  4. Solve; if a normal force or tension comes out negative, the assumed contact has been lost — the body tips or the string goes slack.
  5. For friction: check $f\le\mu_sN$ at the end. On the point of slipping or tipping, set $f=\mu_sN$ or the vanishing normal force to zero.
✏️ Example 5 — A plank on two supports
A uniform plank $4.0\ \text{m}$ long and of mass $20\ \text{kg}$ rests horizontally on two supports: A at $0.50\ \text{m}$ from the left end and B at $3.0\ \text{m}$ from the left end. A $30\ \text{kg}$ child stands $1.5\ \text{m}$ from the left end. (a) Find the forces of the supports. (b) The child walks to the right. How far beyond B can she go before the plank tips?
Forces Weights: plank $196\ \text{N}$ at $x=2.0\ \text{m}$; child $294\ \text{N}$ at $x=1.5\ \text{m}$. Upward $N_A$ at $0.50\ \text{m}$ and $N_B$ at $3.0\ \text{m}$.
Torques about A $N_B(2.5)=196(1.5)+294(1.0)=588$, so $N_B=235\ \text{N}$.
(a) $\sum F_y=0$: $N_A=490-235=255\ \text{N}$. (Check about B: $N_A(2.5)=196(1.0)+294(1.5)=637$, $N_A=255\ \text{N}$ ✓.)
(b) On the point of tipping about B, $N_A=0$. Torques about B: $294\,s=196\times1.0$, so $s=0.67\ \text{m}$ beyond B — at $3.67\ \text{m}$ from the left end, short of the $4.0\ \text{m}$ end.
Lesson Tipping is the moment one normal force reaches zero. Taking torques about the other support removes it at once.
✏️ Example 6 — Can he climb to the top of the ladder?
A uniform ladder $5.0\ \text{m}$ long and of mass $20\ \text{kg}$ leans against a smooth vertical wall, making $53^\circ$ with the rough floor ($\sin53^\circ=0.8$, $\cos53^\circ=0.6$; take $g=10\ \text{m/s}^2$). A $60\ \text{kg}$ man climbs it. (a) Find the least coefficient of friction at the floor that lets him reach the top. (b) If $\mu_s=0.50$, how far along the ladder can he climb?
Find the least coefficient of friction for (a) first:
Forces Weights $200\ \text{N}$ (at the middle) and $600\ \text{N}$ (at distance $s$ along the ladder); smooth wall: only a horizontal $N_w$; floor: $N_f$ up and friction $f$ towards the wall.
Balance Vertical: $N_f=800\ \text{N}$. Horizontal: $f=N_w$. Torques about the foot: $N_w(5.0\sin53^\circ)=200(2.5\cos53^\circ)+600(s\cos53^\circ)$, so $N_w=(100+120\,s)\times0.75$ with $s$ in metres.
(a) At the top ($s=5.0\ \text{m}$): $N_w=700\times0.75=525\ \text{N}$, so $f=525\ \text{N}\le\mu_s(800)$ needs $\mu_s\ge0.656$.
(b) With $\mu_s=0.50$ the floor can give at most $400\ \text{N}$: $(100+120\,s)(0.75)=400$, so $s=3.6\ \text{m}$ — about $72\%$ of the way up.
⏱ Shortcut For a ladder of weight $W$ with a person of weight $W'$ at fraction $k$ of its length, $\mu_\text{min}=\dfrac{(W/2+kW')\cot\theta}{W+W'}$. The higher he climbs, the more friction is needed.

In the widget set the ladder at $60^\circ$ to the floor and $\mu_s=0.30$, then press Play to send the $60\ \text{kg}$ climber up the $15\ \text{kg}$, $5.0\ \text{m}$ ladder. What happens?

Set $\theta=60^\circ$, $\mu_s=0.30$: the floor's limit is $\mu_sN_f=0.30\times735=221\ \text{N}$ (with $N_f=75\times9.8=735\ \text{N}$). The friction needed equals $N_w=g\cot60^\circ(7.5+60k)$, where $k$ is his fraction of the way up; it reaches $221\ \text{N}$ at $k=0.52$, i.e. $2.6\ \text{m}$ along — the verdict reports the slip there. At the top he would need $382\ \text{N}$. A steeper ladder (try $75^\circ$) has a smaller $\cot\theta$ and holds all the way.
Interactive 2 — Climbing a Ladder: When Does It Slip?

A uniform $15\ \text{kg}$ ladder, $5.0\ \text{m}$ long, leans on a smooth wall; a $60\ \text{kg}$ person stands a fraction $k$ of the way up. Torques about the foot give the wall's push $N_w$, which the floor's friction must match. The graph shows the friction needed (red) against $k$ and the limit $\mu_sN_f$ (dashed). Press Play to climb: the ladder holds while the red curve is below the line.

60°0.300.40
floor normal $N_f$—
wall push $N_w$ = friction needed—
friction limit $\mu_sN_f$—
slips at—
⚠️ JEE Main traps

1. Distance instead of moment arm. $\tau=rF\sin\theta$: use the perpendicular distance to the line of action. A force through the pivot, or parallel to the axis, has no torque about it.

2. Forgetting the reference point. Torque and angular momentum are always about a point. A particle moving in a straight line has $L=mvd\ne0$ about a point off its line; a projectile's $L$ about the launch point is not conserved (gravity has a torque there).

3. "Angular momentum conserved, so kinetic energy is conserved." No: $K=L^2/2I$. A skater pulling in gains energy (muscle work); coupled discs lose energy (friction heat). Only $I\omega$ is fixed.

4. Checking only $\sum\mathbf{F}=\mathbf{0}$. A rigid body needs $\sum\boldsymbol{\tau}=\mathbf{0}$ too — a couple has zero net force but turns the body. Take torques about the point where the unknown forces meet.

5. Ladder directions. A smooth wall gives only a horizontal push; the floor gives the whole vertical support $N_f=$ total weight, and friction at the foot points towards the wall. Climbing higher needs more friction.

A uniform rod of mass $2.0\ \text{kg}$ and length $1.0\ \text{m}$ rests horizontally on supports at its two ends. A $3.0\ \text{kg}$ mass hangs $25\ \text{cm}$ from the left end ($g=10\ \text{m/s}^2$). The force of the left support is

Exercises

Take $g=9.8\ \text{m/s}^2$ unless told otherwise. Anticlockwise torques are positive.

I
Torque.
  • 1 A $50\ \text{N}$ force acts perpendicular to a spanner $0.30\ \text{m}$ from the bolt. Find the torque.
  • 2 A $40\ \text{N}$ force acts at the end of a $0.50\ \text{m}$ spanner at $30^\circ$ to the spanner. Find the torque.
  • 3 Find $\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F}$ and its magnitude for $\mathbf{r}=2\,\hat{\mathbf{i}}\ \text{m}$ and $\mathbf{F}=(3\,\hat{\mathbf{j}}+4\,\hat{\mathbf{k}})\ \text{N}$.
  • 4 A force $\mathbf{F}=(2\,\hat{\mathbf{i}}-\hat{\mathbf{j}})\ \text{N}$ acts at $(3,4)\ \text{m}$. Find its torque about the origin. Is it clockwise or anticlockwise?
  • 5 A light rod $1.0\ \text{m}$ long, hinged at its left end O, is horizontal. A $20\ \text{N}$ force acts upward at the right end; a $30\ \text{N}$ force acts downward at $0.50\ \text{m}$ from O at $30^\circ$ to the rod; a $10\ \text{N}$ load hangs from the middle. Find the net torque about O.
  • 6 Two opposite $25\ \text{N}$ forces act along parallel lines $0.12\ \text{m}$ apart. Find the torque of this couple, and explain why it is the same about any point.
  • 7 A force $\mathbf{F}=(4\,\hat{\mathbf{i}}+3\,\hat{\mathbf{j}})\ \text{N}$ acts at $(1,2)\ \text{m}$. Use the torque about the origin to find the perpendicular distance of its line of action from the origin.
  • 8 A wheel of radius $0.40\ \text{m}$ has a $30\ \text{N}$ force applied tangentially at its rim and a $50\ \text{N}$ force applied radially at the rim. Find the torque about the axle.
1 $\tau=0.30\times50=15\ \text{N m}$.
2 $\tau=0.50\times40\times\sin30^\circ=10\ \text{N m}$.
3 $\boldsymbol{\tau}=(0\cdot4-0\cdot3)\hat{\mathbf{i}}+(0\cdot0-2\cdot4)\hat{\mathbf{j}}+(2\cdot3-0)\hat{\mathbf{k}}=(-8\,\hat{\mathbf{j}}+6\,\hat{\mathbf{k}})\ \text{N m}$; $|\boldsymbol{\tau}|=10\ \text{N m}$.
4 $\tau_z=xF_y-yF_x=3(-1)-4(2)=-11$: $\boldsymbol{\tau}=-11\,\hat{\mathbf{k}}\ \text{N m}$, clockwise.
5 $+20(1.0)-30(0.50)\sin30^\circ-10(0.50)=20-7.5-5=+7.5\ \text{N m}$, anticlockwise.
6 $\tau=Fd=25\times0.12=3.0\ \text{N m}$. About any point the torques combine to $(\mathbf{r}_1-\mathbf{r}_2)\times\mathbf{F}$, which does not depend on the origin.
7 $\tau_z=1(3)-2(4)=-5\ \text{N m}$; $F=5\ \text{N}$; $r_\perp=\dfrac{|\tau|}{F}=1.0\ \text{m}$.
8 The radial force passes through the axle (zero torque): $\tau=0.40\times30=12\ \text{N m}$.
II
Angular momentum and $\boldsymbol{\tau}=d\mathbf{L}/dt$.
  • 1 A $0.50\ \text{kg}$ particle moves on a circle of radius $2.0\ \text{m}$ at $3.0\ \text{m/s}$. Find its angular momentum about the centre.
  • 2 A $2.0\ \text{kg}$ particle moves at $5.0\ \text{m/s}$ in the $+x$ direction along the line $y=4.0\ \text{m}$. Find its angular momentum about the origin. Does it change with time?
  • 3 A particle at $\mathbf{r}=(\hat{\mathbf{i}}+2\,\hat{\mathbf{j}})\ \text{m}$ has momentum $\mathbf{p}=(3\,\hat{\mathbf{i}}-\hat{\mathbf{j}})\ \text{kg m/s}$. Find $L_z$ about the origin.
  • 4 Estimate the orbital angular momentum of the Earth ($5.97\times10^{24}\ \text{kg}$) about the Sun, treating the orbit as a circle of radius $1.50\times10^{11}\ \text{m}$ traversed in $3.16\times10^7\ \text{s}$.
  • 5 A constant torque of $4.0\ \text{N m}$ acts on a wheel at rest for $3.0\ \text{s}$. Find its final angular momentum.
  • 6 The angular momentum of a body is $L=(2t^2+3)\ \text{kg m}^2/\text{s}$. Find the torque on it at $t=2.0\ \text{s}$.
  • 7 A $0.50\ \text{kg}$ stone is thrown from the origin at $30\ \text{m/s}$, $53^\circ$ above the horizontal ($\sin53^\circ=0.8$, $g=10\ \text{m/s}^2$). Find the magnitude of its angular momentum about the origin just before it lands.
  • 8 A $0.10\ \text{kg}$ ball is dropped from rest at the point $(3.0,\,10)\ \text{m}$. Find its angular momentum about the origin $1.0\ \text{s}$ later.
1 $L=mvr=0.50\times3.0\times2.0=3.0\ \text{kg m}^2/\text{s}$.
2 $L=mv\,r_\perp=2.0\times5.0\times4.0=40\ \text{kg m}^2/\text{s}$, along $-\hat{\mathbf{k}}$ (clockwise). Constant: no force, no torque.
3 $L_z=xp_y-yp_x=1(-1)-2(3)=-7\ \text{kg m}^2/\text{s}$.
4 $L=mr^2\omega=5.97\times10^{24}\times(1.50\times10^{11})^2\times\dfrac{2\pi}{3.16\times10^7}=2.7\times10^{40}\ \text{kg m}^2/\text{s}$.
5 $\Delta L=\tau\,\Delta t=12\ \text{kg m}^2/\text{s}$.
6 $\tau=\dfrac{dL}{dt}=4t=8.0\ \text{N m}$.
7 $u_x=18$, $u_y=24\ \text{m/s}$; flight time $4.8\ \text{s}$; $L=\tfrac12mgu_xT^2=\tfrac12(0.50)(10)(18)(4.8)^2=1.0\times10^3\ \text{kg m}^2/\text{s}$ (check: $R\,m|v_y|=86.4\times0.50\times24=1037$).
8 Velocity $9.8\ \text{m/s}$ straight down, moment arm $x=3.0\ \text{m}$: $L=3.0\times0.10\times9.8=2.94\ \text{kg m}^2/\text{s}$ (clockwise). It grows as $mgxt$, matching the torque $mgx$.
III
Conservation of angular momentum.
  • 1 A disc ($I=0.20\ \text{kg m}^2$) spins freely at $30\ \text{rad/s}$. A ring ($I=0.10\ \text{kg m}^2$) at rest is dropped on it coaxially. Find the final angular velocity and the kinetic energy lost.
  • 2 A diver's moment of inertia falls from $4.0$ to $1.6\ \text{kg m}^2$ as she tucks. If she was turning at $2.0\ \text{rev/s}$, find her new rate.
  • 3 A merry-go-round ($I=240\ \text{kg m}^2$, radius $2.0\ \text{m}$) turns freely at $1.0\ \text{rad/s}$ with a $60\ \text{kg}$ child at its rim. The child walks to the centre. Find the new angular velocity.
  • 4 A comet moves at $54\ \text{km/s}$ at its closest approach to the Sun, $0.60\ \text{AU}$. How fast does it move at its farthest point, $18\ \text{AU}$ away?
  • 5 An insect of mass $20\ \text{g}$ is at the centre of a disc ($I=1.0\times10^{-3}\ \text{kg m}^2$) spinning freely at $10\ \text{rad/s}$. It crawls out to $0.10\ \text{m}$ from the axis. Find the new angular velocity.
  • 6 Explain why a single-rotor helicopter needs a small rotor on its tail.
  • 7 A star of radius $7.0\times10^5\ \text{km}$ turns once in $30$ days. It collapses into a uniform sphere of radius $10\ \text{km}$ ($I\propto R^2$ for the same mass and shape). Find the new rotation period, in milliseconds.
  • 8 A door ($I=12\ \text{kg m}^2$ about its hinges, width $1.0\ \text{m}$) is at rest. A $10\ \text{g}$ bullet moving at $400\ \text{m/s}$ perpendicular to the door strikes its outer edge and stays in it. Find the door's angular velocity.
1 $\omega=\dfrac{0.20\times30}{0.30}=20\ \text{rad/s}$. $K$: $90\ \text{J}\to60\ \text{J}$, so $30\ \text{J}$ lost (one third $=I_2/(I_1+I_2)$).
2 $\omega_2=\dfrac{4.0}{1.6}\times2.0=5.0\ \text{rev/s}$.
3 $I_1=240+60(2.0)^2=480\ \text{kg m}^2$, $I_2=240\ \text{kg m}^2$: $\omega_2=\dfrac{480}{240}\times1.0=2.0\ \text{rad/s}$.
4 Gravity is central (no torque about the Sun) and $\mathbf{v}\perp\mathbf{r}$ at both points: $v=\dfrac{54\times0.60}{18}=1.8\ \text{km/s}$.
5 $I_2=1.0\times10^{-3}+0.020(0.10)^2=1.2\times10^{-3}\ \text{kg m}^2$; $\omega_2=\dfrac{10}{1.2}=8.3\ \text{rad/s}$.
6 The engine exerts a torque on the main rotor; the rotor exerts an equal and opposite torque on the body (internal pair), which would spin the body the other way to keep $\mathbf{L}$ fixed. The tail rotor's sideways thrust supplies an external counter-torque from the air.
7 $T\propto I\propto R^2$: $T_2=30\times86400\ \text{s}\times\left(\dfrac{10}{7.0\times10^5}\right)^2=5.3\times10^{-4}\ \text{s}=0.53\ \text{ms}$.
8 About the hinge: $mvd=(I+md^2)\omega$, so $\omega=\dfrac{0.010\times400\times1.0}{12+0.010}=0.33\ \text{rad/s}$. (Linear momentum is not conserved — the hinge pushes — but its torque about the hinge is zero.)
IV
Equilibrium of rigid bodies.
  • 1 A uniform metre rule balances at its $50\ \text{cm}$ mark. A $40\ \text{g}$ mass hangs at the $20\ \text{cm}$ mark. Where must a $60\ \text{g}$ mass hang to restore balance?
  • 2 A metre rule balances on a knife-edge at its $40\ \text{cm}$ mark when a $50\ \text{g}$ mass hangs at its $10\ \text{cm}$ mark. Find the mass of the rule.
  • 3 A uniform $6.0\ \text{m}$, $50\ \text{kg}$ beam rests on supports at its ends. An $80\ \text{kg}$ man stands $2.0\ \text{m}$ from the left end. Find the two support forces.
  • 4 A uniform $2.0\ \text{m}$, $10\ \text{kg}$ rod is hinged to a wall at one end and held horizontal by a string from its other end to a point on the wall above the hinge; the string makes $30^\circ$ with the rod. Find the tension and the force of the hinge.
  • 5 A uniform $12\ \text{kg}$ ladder rests against a smooth wall at $60^\circ$ to the floor. Find the friction force at the floor and the least coefficient of friction.
  • 6 A $20\ \text{kg}$ cubical box of side $0.40\ \text{m}$ stands on a floor with $\mu_s=0.60$. It is pushed horizontally at its top edge. Does it slide or tip first? Find the push that starts the motion.
  • 7 A wheel of radius $0.50\ \text{m}$ and weight $400\ \text{N}$ rests against a step $0.20\ \text{m}$ high. Find the least horizontal force applied at the axle that will just lift it over the step.
  • 8 Two people carry a uniform $3.0\ \text{m}$, $30\ \text{kg}$ pole on their shoulders, one at each end. A $20\ \text{kg}$ load hangs $1.0\ \text{m}$ from end A. Find the force on each shoulder.
1 Moments about $50\ \text{cm}$: $40\times30=60\times d$, $d=20\ \text{cm}$ — at the $70\ \text{cm}$ mark.
2 The rule's weight acts at $50\ \text{cm}$, $10\ \text{cm}$ beyond the edge: $m(10)=50(30)$, so $m=150\ \text{g}$.
3 Torques about the right end: $N_L(6.0)=490(3.0)+784(4.0)$, $N_L=768\ \text{N}$; $N_R=1274-768=506\ \text{N}$.
4 Torques about the hinge: $T\sin30^\circ(2.0)=98(1.0)$, $T=98\ \text{N}$. Hinge: horizontal $T\cos30^\circ=84.9\ \text{N}$ pushing the rod away from the wall (balancing the string's pull towards the wall), vertical $98-49=49\ \text{N}$ up; magnitude $98\ \text{N}$.
5 Torques about the foot: $N_w L\sin60^\circ=mg\tfrac L2\cos60^\circ$, so $f=N_w=\tfrac12(117.6)\cot60^\circ=34\ \text{N}$; $\mu_\text{min}=\dfrac{f}{mg}=\tfrac12\cot60^\circ=0.29$.
6 Slide: $F=\mu_smg=118\ \text{N}$. Tip about the front edge: $F(0.40)=196(0.20)$, $F=98\ \text{N}$. Tipping needs less, so it tips first at $98\ \text{N}$.
7 On the point of lifting, the floor's force vanishes; torques about the step's edge: $F(R-h)=W\sqrt{h(2R-h)}$, so $F=\dfrac{400\times\sqrt{0.20\times0.80}}{0.30}=533\ \text{N}$.
8 Torques about B: $N_A(3.0)=294(1.5)+196(2.0)=833$, $N_A=278\ \text{N}$; $N_B=490-278=212\ \text{N}$.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ A force $\mathbf{F}=(2\,\hat{\mathbf{i}}-3\,\hat{\mathbf{j}}+\hat{\mathbf{k}})\ \text{N}$ acts at the point $(\hat{\mathbf{i}}+\hat{\mathbf{j}}-\hat{\mathbf{k}})\ \text{m}$. Its torque about the origin is (A) $(-2\,\hat{\mathbf{i}}-3\,\hat{\mathbf{j}}-5\,\hat{\mathbf{k}})\ \text{N m}$ (B) $(2\,\hat{\mathbf{i}}+3\,\hat{\mathbf{j}}+5\,\hat{\mathbf{k}})\ \text{N m}$ (C) $(-4\,\hat{\mathbf{i}}-\hat{\mathbf{j}}-5\,\hat{\mathbf{k}})\ \text{N m}$ (D) $(-2\,\hat{\mathbf{i}}+3\,\hat{\mathbf{j}}-\hat{\mathbf{k}})\ \text{N m}$

Components $\tau_x=yF_z-zF_y=1(1)-(-1)(-3)=-2$; $\tau_y=zF_x-xF_z=(-1)(2)-1(1)=-3$; $\tau_z=xF_y-yF_x=1(-3)-1(2)=-5$.
Check $\boldsymbol{\tau}\cdot\mathbf{F}=-4+9-5=0$ ✓.
Answer (A).
⏱ Shortcut (B) is $\mathbf{F}\times\mathbf{r}$ — the order matters. Dot each option with $\mathbf{F}$: only (A) and (B) give zero.

E2. JEE Main · Numerical A flywheel of moment of inertia $2.0\ \text{kg m}^2$ spins freely at $60\ \text{rad/s}$. A second wheel of moment of inertia $1.0\ \text{kg m}^2$, initially at rest, is suddenly coupled to it on the same axle, and they turn together. Find the heat produced (in J). Give the answer to the nearest integer.

Common ω $2.0\times60=3.0\,\omega$, so $\omega=40\ \text{rad/s}$.
Energy Before $\tfrac12(2.0)(60)^2=3600\ \text{J}$; after $\tfrac12(3.0)(40)^2=2400\ \text{J}$; heat $1200\ \text{J}$.
Answer $1200$.
⏱ Shortcut Loss $=K_1\dfrac{I_2}{I_1+I_2}=3600\times\tfrac13=1200\ \text{J}$.

E3. JEE Main · MCQ A particle of mass $m$ moves with constant velocity $v$ along a straight line at perpendicular distance $d$ from a point $O$. Its angular momentum about $O$ (A) is zero (B) increases with time (C) is constant and equal to $mvd$ (D) decreases with time

Idea $L=p\,r_\perp$ and the moment arm of the velocity is always $d$.
Check No force acts, so no torque, so $\mathbf{L}$ is constant ✓.
Answer (C).
⏱ Shortcut Moving in a circle is not needed for angular momentum; only a line through $O$ gives zero.

E4. JEE Main · Numerical A uniform ladder of length $10\ \text{m}$ and mass $20\ \text{kg}$ rests against a smooth vertical wall, making an angle of $53^\circ$ with the rough horizontal floor. A $60\ \text{kg}$ man stands on it two-thirds of the way up. Taking $g=10\ \text{m/s}^2$ and $\tan53^\circ=\tfrac43$, find the friction force (in N) exerted by the floor on the ladder. Give the answer to the nearest integer.

Torques About the foot: $N_w(L\sin53^\circ)=200\left(\tfrac L2\cos53^\circ\right)+600\left(\tfrac{2L}{3}\cos53^\circ\right)$.
Solve $N_w=(100+400)\cot53^\circ=500\times\tfrac34=375\ \text{N}$; horizontal balance gives $f=N_w=375\ \text{N}$, towards the wall.
Answer $375$.
⏱ Shortcut The length $L$ cancels: $f=\left(\tfrac W2+kW'\right)\cot\theta$.

E5. JEE Main · MCQ A uniform spherical star rotates with period $T$. With no external torque, it shrinks to half its radius while keeping its mass and staying uniform. Its new period is (A) $\dfrac T2$ (B) $2T$ (C) $4T$ (D) $\dfrac T4$

Idea $I\omega$ constant with $I\propto MR^2$, so $\omega\propto\dfrac1{R^2}$ and $T\propto R^2$.
Value $T'=T\left(\tfrac12\right)^2=\dfrac T4$.
Answer (D).
⏱ Shortcut (A) uses $T\propto R$. Note its kinetic energy $L^2/2I$ becomes four times larger.

E6. JEE Main · Numerical A horizontal platform of moment of inertia $200\ \text{kg m}^2$ rotates freely about a vertical axis at $10$ revolutions per minute. A $50\ \text{kg}$ child stands on it $2.0\ \text{m}$ from the axis and walks inward to $1.0\ \text{m}$ from the axis. Treating the child as a point mass, find the new rate of rotation in revolutions per minute. Give the answer to the nearest integer.

Moments of inertia $I_1=200+50(2.0)^2=400\ \text{kg m}^2$; $I_2=200+50(1.0)^2=250\ \text{kg m}^2$.
Conservation $\omega_2=\dfrac{400}{250}\times10=16\ \text{rpm}$.
Answer $16$.
⏱ Shortcut Keep rpm on both sides — the ratio needs no conversion. Forgetting the platform's own $200\ \text{kg m}^2$ gives $40$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. How accurately can the principle of moments measure an unknown mass with nothing more than a metre rule, a knife-edge and one known mass — and which error dominates?

Why it matters. Steelyard balances, crane load indicators, aircraft weight-and-balance checks and the torque wrenches used on car wheels and wind-turbine bolts all rely on balancing moments. Engineers who certify cranes must know how a small error in a lever arm grows into an error in the load — exactly the propagation of errors you learned in Chapter 1.

What to do.

  1. Balance a metre rule on a knife-edge (a triangular prism or the edge of a ruler) and record the balance point $G$; it should be near $50\ \text{cm}$.
  2. Hang a known mass (say a $100\ \text{g}$ slotted mass or a full $200\ \text{mL}$ water packet) on one side and the unknown object on the other, with thread loops. Slide them until the rule balances; record both distances from the knife-edge.
  3. Compute the unknown mass from $m_1d_1=m_2d_2$. Repeat for five different positions of the known mass.
  4. Now move the knife-edge to $30\ \text{cm}$ and repeat, this time including the rule's own weight at $G$ in the moment equation. Find the mass of the rule itself as a by-product.
  5. Estimate the uncertainty: how far can you move a mass before you can see the rule tilt? Propagate that $\Delta d$ into $\Delta m$.

Tools: Metre rule, knife-edge or prism, thread, one known mass, objects to weigh, a kitchen scale for a final check.

Hand in: A results table, a plot of $d_2$ against $d_1$ (a straight line through the origin with slope $m_1/m_2$), your mass with its percentage uncertainty, and a comparison with the kitchen scale.

Going further. Use the slope of the $d_2$–$d_1$ graph instead of single readings. Does it reduce the scatter? Why does placing the masses far from the knife-edge give a smaller percentage error?

Instructor note: students usually get within 2–5% of the scale reading. The common errors are forgetting the rule's own moment when the knife-edge is not at $G$ and reading distances from the end of the rule rather than from the knife-edge. The graph method shows clearly that random errors in $d$ matter least when the distances are large.

🧪 Self-check quiz

0/5 correct

Q1. The torque of a couple of forces

Q2. If the net external torque on a system is zero, which quantity must stay constant?

Q3. Angular momentum has the same dimensions as

Q4. A rigid body is in equilibrium under three non-parallel forces. Their lines of action must

Q5. A planet moves fastest when it is nearest the Sun. The best explanation is