4.1 Work and the Work–Energy Theorem
Work is force times the displacement along the force — $W=\mathbf{F}\cdot\mathbf{d}$, or the area under the $F$–$x$ graph when the force varies — and the net work done on a body is exactly its change in kinetic energy.
A crane hauls a steel beam up a building site, a bowler's arm whips a cricket ball to $40\ \text{m/s}$, a car's brakes bring it to rest in a few tens of metres, and a bullet buries itself a few centimetres into a block of wood. Newton's second law can describe every one of these, but only if you know how the force changes from instant to instant — and often you do not. What you usually know is how the force depends on position, and over what distance it acts.
This section introduces the quantity that turns "force over a distance" into a single number: work. Then it proves the most useful result in mechanics after Newton's laws themselves — the work–energy theorem — which says that the total work done on a body equals the change in its kinetic energy. With it you can find a speed or a stopping distance without ever computing an acceleration or a time. We use the free-body diagrams of Section 3.2 and the friction laws of Section 3.3 throughout; the next section, 4.2, builds potential energy and conservation of energy on top of this one.
Work done by a constant force
In everyday speech, holding a heavy bag for ten minutes is hard work. In physics it is no work at all: the bag does not move. Physics reserves the word for a force that acts while its point of application moves, and it counts only the part of the motion along the force. Push a lawnmower by its slanting handle: only the horizontal component of your push helps it along the lawn; the vertical component just presses it into the grass.
If a constant force $\mathbf{F}$ acts on a body while its point of application undergoes a displacement $\mathbf{d}$, the work done by the force is the scalar product
$$W=\mathbf{F}\cdot\mathbf{d}=Fd\cos\theta ,$$where $\theta$ is the angle between $\mathbf{F}$ and $\mathbf{d}$. In components, $W=F_x\,\Delta x+F_y\,\Delta y+F_z\,\Delta z$. Work is a scalar; its SI unit is the joule, $1\ \text{J}=1\ \text{N m}=1\ \text{kg m}^2\text{s}^{-2}$, and its dimensional formula is $[\text{ML}^2\text{T}^{-2}]$.
Read $Fd\cos\theta$ in either of two ways: (force) × (component of the displacement along the force), or (component of the force along the displacement) × (distance moved). Both give the same number. The sign of the work depends only on the angle:
- Positive work ($0\le\theta\lt90^\circ$): the force has a component along the motion — your pull on a trolley, gravity on a falling stone.
- Zero work ($\theta=90^\circ$, or $d=0$): the force is perpendicular to the motion, or nothing moves. The normal force on a block sliding along a level floor, the tension in the string of a stone whirled in a horizontal circle, the gravity on a satellite in a circular orbit, and the vertical force of a porter's head on a suitcase he carries along a level platform all do zero work.
- Negative work ($90^\circ\lt\theta\le180^\circ$): the force has a component opposing the motion — kinetic friction on a sliding block, gravity on a ball thrown upward, the brakes on a moving car.
Work is always done by a particular force on a particular body. Always say which: "the work done by friction on the block" is a definite number; "the work done" on its own is not.
Work by gravity. Near the Earth, gravity is the constant force $m\mathbf{g}$ pointing down. If a body moves from height $h_1$ to height $h_2$ by any straight displacement, only the vertical component of the displacement counts, so
$$W_\text{grav}=-mg\,(h_2-h_1).$$Sliding a block a distance $L$ down a slope of angle $\alpha$ gives $W_\text{grav}=(mg\sin\alpha)L=mg\,(L\sin\alpha)=mgh$, where $h$ is the drop in height — exactly what a vertical drop of $h$ would give. (In Section 4.2 we show that this holds for every path, curved or not.)
When several forces $\mathbf{F}_1,\mathbf{F}_2,\dots$ act on a body that moves as a whole through a displacement $\mathbf{d}$, the total (net) work done on it is the sum of the works done by the individual forces, and equals the work done by the resultant force:
$$W_\text{net}=W_1+W_2+\cdots=(\mathbf{F}_1+\mathbf{F}_2+\cdots)\cdot\mathbf{d}=\mathbf{F}_\text{net}\cdot\mathbf{d}.$$The two ways of computing $W_\text{net}$ are a good check on each other. Note also that work depends on the frame of reference, because displacement does: a passenger sitting in a moving train does no work against the seat in the train's frame, but in the ground frame the seat's forward friction (while the train accelerates) does positive work on him. Unless told otherwise, use the ground frame.
A porter carries a $20\ \text{kg}$ suitcase on his head and walks $30\ \text{m}$ along a level platform at constant speed. The work done by the porter's head on the suitcase is
Work done by a variable force
Many forces change as a body moves: a spring pulls harder the further you stretch it, the push of the gases on a piston falls as they expand, and a rubber catapult's pull dies away as the stone flies off. If the force changes with position, we cannot use $Fd$ directly. Instead, cut the motion along the $x$-axis into many small steps $\Delta x$. Over each step the force is nearly constant, so the work in that step is $F(x)\,\Delta x$ — the area of a thin strip under the graph of $F$ against $x$. Adding the strips and letting $\Delta x\to0$ gives an integral.
For a force $F(x)$ along the $x$-axis acting on a body that moves from $x_1$ to $x_2$,
$$W=\int_{x_1}^{x_2}F(x)\,dx=\text{(signed) area under the } F\text{–}x \text{ graph from } x_1 \text{ to } x_2 .$$Area above the $x$-axis counts as positive work, area below as negative (for motion in the $+x$ direction). For a force that varies in three dimensions along a path $C$,
$$W=\int_C\mathbf{F}\cdot d\mathbf{r}=\int_C\left(F_x\,dx+F_y\,dy+F_z\,dz\right).$$For a constant force the area is a rectangle, $F\,(x_2-x_1)$, and we are back to Definition 4.1. When each component depends only on its own coordinate ($F_x$ on $x$, $F_y$ on $y$, …), the three integrals can be done separately and the path does not matter — the commonest JEE Main case.
The spring force. The most important variable force in this chapter is the push or pull of a spring. Fix one end of a light spring and pull the other end out a distance $x$ from its natural (relaxed) length: for small $x$, the spring pulls back with a force proportional to $x$.
An ideal spring is massless and obeys Hooke's law: when its free end is displaced by $x$ from the natural length (stretched for $x\gt0$, compressed for $x\lt0$), it exerts the restoring force
$$F_s=-kx .$$The positive constant $k$ is the spring constant (or force constant), measured in $\text{N/m}$; a stiff spring has a large $k$. The minus sign says the force always points back towards the natural length.
The graph of $F_s$ against $x$ is a straight line through the origin with slope $-k$, so the work it does is a triangle-shaped area:
When the end of an ideal spring moves from extension $x_1$ to extension $x_2$, the spring force does work
$$W_s=\int_{x_1}^{x_2}(-kx)\,dx=-\tfrac12k\left(x_2^2-x_1^2\right).$$Stretching or compressing a spring from its natural length ($x_1=0$) by $x$: $W_s=-\tfrac12kx^2$, the same for both. An agent who does this slowly (no gain in speed) must apply $+kx$ and does work $+\tfrac12k\left(x_2^2-x_1^2\right)$.
The squares matter. Stretching a spring from $0$ to $5\ \text{cm}$ costs some work; stretching it a further $5\ \text{cm}$, from $5$ to $10\ \text{cm}$, costs three times as much, because the force is larger all the way along the second step.
In the widget, choose the force $F=12-3x$ (in newtons, $x$ in metres) acting on the $2.0\ \text{kg}$ block, which starts from rest at $x=0$ on a smooth floor. Where is the block moving fastest, and how fast is it going there?
A spring with $k=200\ \text{N/m}$ is already stretched by $10\ \text{cm}$. The work needed to stretch it slowly to $20\ \text{cm}$ is
Kinetic energy and the work–energy theorem
What does net work do to a body? Take the simplest case: a constant net force $F$ along the motion of a body of mass $m$, which accelerates uniformly from speed $u$ to speed $v$ over a distance $d$. From Section 2.1, $v^2=u^2+2ad$, and $F=ma$, so
$$W_\text{net}=Fd=m\,ad=m\,\frac{v^2-u^2}{2}=\tfrac12mv^2-\tfrac12mu^2 .$$The net work equals the change in the quantity $\tfrac12mv^2$. This quantity deserves a name.
The kinetic energy of a body of mass $m$ moving with speed $v$ (every part of it with the same velocity) is
$$K=\tfrac12mv^2=\frac{p^2}{2m},$$where $p=mv$ is the magnitude of its momentum. Kinetic energy is a scalar, never negative, measured in joules, and depends only on the speed, not on the direction of motion.
The derivation above assumed a constant force, but the result is general. For a force that varies with position, write Newton's second law with the chain rule, $F=m\dfrac{dv}{dt}=m\dfrac{dv}{dx}\dfrac{dx}{dt}=mv\dfrac{dv}{dx}$, and integrate along the motion:
$$W_\text{net}=\int_{x_1}^{x_2}F\,dx=\int_{u}^{v}mv\,dv=\tfrac12mv^2-\tfrac12mu^2 .$$In two or three dimensions the same steps go through with $\mathbf{F}\cdot d\mathbf{r}=m\,\dfrac{d\mathbf{v}}{dt}\cdot\mathbf{v}\,dt=d\!\left(\tfrac12mv^2\right)$: the part of the force perpendicular to the velocity changes the direction of motion but not the speed, and does no work.
For a particle (or a body moving without rotation, all of whose parts have the same velocity), observed from an inertial frame, the work done by the net force — that is, the sum of the works done by all the forces acting on it, including friction, normal forces and tensions — equals the change in its kinetic energy:
$$W_\text{net}=K_f-K_i=\tfrac12mv^2-\tfrac12mu^2 .$$The theorem holds for constant and variable forces and for any path. Positive net work speeds the body up, negative net work slows it down, zero net work leaves its speed unchanged.
The theorem is a scalar statement — one equation, with no directions to resolve — and it never mentions time. That is exactly why it is so quick: use it whenever a problem gives or asks for speeds and distances, and use Newton's second law when it asks for accelerations or times.
Stopping distance. A car of mass $m$ moving at $u$ skids to rest on a level road with kinetic friction $\mu_kmg$. The only force doing work is friction: $-\mu_kmg\,s=0-\tfrac12mu^2$, so
$$s=\frac{u^2}{2\mu_kg}.$$The stopping distance is independent of the mass and proportional to the square of the speed: double the speed and the car needs four times the distance. This one fact sits behind every speed limit near a school.
Kinetic energy and momentum. Since $K=p^2/2m$: two bodies with the same momentum have kinetic energies inversely proportional to their masses (the lighter one has more), and two bodies with the same kinetic energy have momenta proportional to $\sqrt m$ (the heavier one has more). If the momentum of a body rises by a factor $n$, its kinetic energy rises by $n^2$.
- Choose the body and two instants: "initial" and "final". Write $K_i$ and $K_f$.
- Draw its free-body diagram. List every force, including friction, normal forces and tensions.
- Find the work done by each force over the motion: $Fd\cos\theta$ for constant forces, an area or an integral for variable ones; $0$ for forces perpendicular to the motion.
- Add them (with signs) and set the sum equal to $K_f-K_i$. Solve for the unknown speed, distance or force.
- If a force's size depends on $N$ (friction), get $N$ from the equation perpendicular to the motion first.
In the braking widget, keep the level road ($\theta=0^\circ$) and $\mu_k=0.50$. Set the speed first to $10\ \text{m/s}$ and then to $20\ \text{m/s}$. By what factor does the stopping distance grow?
1. Forgetting a force in $W_\text{net}$. The work–energy theorem needs the work of all forces. Leaving out friction, or the work of gravity on a slope, is the commonest error. Forces perpendicular to the motion (normal force on a level floor, string tension in circular motion) contribute zero — say so, then drop them.
2. Taking $N=mg$ when computing friction work. A rope pulling at an angle, a slope, or a push pressing down all change $N$, and so change the friction work (Example 1).
3. Spring work with $\tfrac12k(\Delta x)^2$. The work to stretch from $x_1$ to $x_2$ is $\tfrac12k\left(x_2^2-x_1^2\right)$, not $\tfrac12k(x_2-x_1)^2$. Measure $x$ from the natural length, in metres.
4. Signs of graph areas. Area below the $x$-axis is negative work for motion in the $+x$ direction. The speed is greatest where the force (or net force) changes sign, not where it is largest (Example 3, Interactive 1).
5. Percentages of $K$ and $p$. $K\propto p^2$ and $K\propto v^2$: a $20\%$ rise in momentum means a $44\%$ rise in kinetic energy, not $20\%$ or $40\%$. Work the factor out — $(1.2)^2=1.44$ — never add percentages.
A $1.0\ \text{kg}$ body and a $4.0\ \text{kg}$ body have momenta of the same magnitude. The ratio of their kinetic energies, $K_1:K_4$, is
Exercises
Take $g=9.8\ \text{m/s}^2$ unless told otherwise. Strings are light and inextensible; springs are ideal.
- 1 A $5.0\ \text{kg}$ box is lifted vertically through $2.0\ \text{m}$ at constant speed. Find the work done by the lifting force and by gravity.
- 2 A force of $25\ \text{N}$ acts at $60^\circ$ to the displacement of a body that moves $4.0\ \text{m}$. Find the work done by the force.
- 3 A $3.0\ \text{kg}$ block slides $2.0\ \text{m}$ down a smooth incline of $30^\circ$. Find the work done on it by gravity and by the normal force.
- 4 Find the work done by $\mathbf{F}=(2\hat{\mathbf{i}}+3\hat{\mathbf{j}}-\hat{\mathbf{k}})\ \text{N}$ during a displacement $\mathbf{d}=(4\hat{\mathbf{i}}-\hat{\mathbf{j}}+2\hat{\mathbf{k}})\ \text{m}$.
- 5 A force $\mathbf{F}=(6\hat{\mathbf{i}}-8\hat{\mathbf{j}})\ \text{N}$ acts on a body while it is displaced by $\mathbf{d}=(3\hat{\mathbf{i}}+4\hat{\mathbf{j}})\ \text{m}$. Find the work done and the angle between $\mathbf{F}$ and $\mathbf{d}$.
- 6 A $15\ \text{kg}$ sledge is pulled $20\ \text{m}$ at constant velocity across level snow by a rope at $30^\circ$ above the horizontal; $\mu_k=0.10$. Find the tension and the work done by it.
- 7 How much work does the string's tension do on a stone whirled once round a horizontal circle at constant speed? On a pendulum bob during one swing? Explain.
- 8 A $60\ \text{kg}$ person climbs a staircase $4.0\ \text{m}$ high. Find the work done on the person by gravity.
- 9 A $2.0\ \text{kg}$ block is pushed $5.0\ \text{m}$ up a rough incline of $37^\circ$ ($\sin37^\circ=0.6$) at constant speed by a force parallel to the incline; $\mu_k=0.25$, $g=10\ \text{m/s}^2$. Find the work done by the push, by gravity and by friction, and the net work.
- 1 A force $F=6x\ \text{N}$ ($x$ in m) acts along the $x$-axis. Find the work done as the body moves from $x=1\ \text{m}$ to $x=3\ \text{m}$.
- 2 Find the work done by $F=(4-2x)\ \text{N}$ as a body moves from $x=0$ to $x=3\ \text{m}$. Over which part of this motion is the work negative?
- 3 A force increases uniformly from $0$ to $20\ \text{N}$ as a body moves from $x=0$ to $x=4\ \text{m}$, and then stays at $20\ \text{N}$ until $x=6\ \text{m}$. Find the work done.
- 4 A spring has $k=400\ \text{N/m}$. Find the work needed to stretch it from its natural length to $5.0\ \text{cm}$, and from $5.0\ \text{cm}$ to $10\ \text{cm}$.
- 5 A force of $50\ \text{N}$ stretches a spring by $10\ \text{cm}$. Find the work done by the spring when it is stretched further, from $10\ \text{cm}$ to $20\ \text{cm}$.
- 6 Find the work done by $\mathbf{F}=(2x\,\hat{\mathbf{i}}+3y^2\,\hat{\mathbf{j}})\ \text{N}$ as a particle moves from the origin to $(2\ \text{m},\,1\ \text{m})$.
- 7 A repulsive force $F=\dfrac{6}{x^2}\ \text{N}$ ($x$ in m) acts along $+x$. Find the work it does as the body moves from $x=1\ \text{m}$ to $x=3\ \text{m}$.
- 8 A uniform $3.0\ \text{kg}$ chain of length $1.2\ \text{m}$ lies on a smooth table with one-third of its length hanging over the edge. Find the work needed to pull the hanging part slowly back onto the table.
- 1 Find the kinetic energy of a $1500\ \text{kg}$ car moving at $72\ \text{km/h}$.
- 2 Bodies of mass $2.0\ \text{kg}$ and $8.0\ \text{kg}$ have equal kinetic energies. Find the ratio of their momenta.
- 3 The momentum of a body increases by $20\%$. By what percentage does its kinetic energy increase?
- 4 Use the work–energy theorem to find how high a $0.50\ \text{kg}$ ball rises when thrown straight up at $14\ \text{m/s}$ (ignore air resistance).
- 5 A car moving at $15\ \text{m/s}$ locks its wheels on a road with $\mu_k=0.60$. Find the skidding distance.
- 6 Find the skidding distance in part 5 if the car were moving at $30\ \text{m/s}$.
- 7 A $2.0\ \text{kg}$ block at rest on a floor ($\mu_k=0.20$) is pushed $5.0\ \text{m}$ by a horizontal $12\ \text{N}$ force. Find its final speed.
- 8 A $20\ \text{g}$ bullet moving at $500\ \text{m/s}$ stops after penetrating $10\ \text{cm}$ into a fixed block. Find the average resistive force.
- 9 A bullet loses $20\%$ of its speed in passing through one plank. Assuming the same resistive force in every plank, in which plank of a thick stack does it come to rest?
- 1 A $1.0\ \text{kg}$ particle starts from rest at $x=0$ on a smooth surface and is acted on only by $F=(8-2x)\ \text{N}$. Find its speed at $x=2\ \text{m}$, its greatest speed, and where it next comes to rest.
- 2 A $5.0\ \text{kg}$ block slides from rest $5.0\ \text{m}$ down a rough incline of $37^\circ$ ($\sin37^\circ=0.6$); $\mu_k=0.25$, $g=10\ \text{m/s}^2$. Find its speed at the bottom using the work–energy theorem.
- 3 The position of a $2.0\ \text{kg}$ particle moving along the $x$-axis is $x=t^3-3t$ (in m, $t$ in s). Find the work done on it by the net force in the first $2.0\ \text{s}$.
- 4 A $0.20\ \text{kg}$ stone dropped from a height of $20\ \text{m}$ hits the ground at $18\ \text{m/s}$. Find the work done by air resistance.
- 5 A pendulum bob on a $1.0\ \text{m}$ string is released from rest with the string horizontal. Use the work–energy theorem to find its speed at the lowest point.
- 6 (Modelling) A driver travelling at $90\ \text{km/h}$ sees an obstacle. Her reaction time is $0.70\ \text{s}$, after which the car skids with $\mu_k=0.70$. Find the total stopping distance from the moment she sees the obstacle.
- 7 A $1.0\ \text{kg}$ block moving at $6.0\ \text{m/s}$ enters a rough strip on which the coefficient of kinetic friction increases with distance as $\mu_k=0.10x$ ($x$ in m, measured from the edge of the strip). Taking $g=10\ \text{m/s}^2$, find how far it goes into the strip.
E1. JEE Main · MCQ A constant force $\mathbf{F}=(5\hat{\mathbf{i}}+3\hat{\mathbf{j}}+2\hat{\mathbf{k}})\ \text{N}$ acts on a particle that moves from the point $(2,\,-1,\,0)\ \text{m}$ to the point $(0,\,3,\,2)\ \text{m}$. The work done by the force is (A) $26\ \text{J}$ (B) $6\ \text{J}$ (C) $-6\ \text{J}$ (D) $14\ \text{J}$
E2. JEE Main · Numerical The position of a $2\ \text{kg}$ particle moving along the $x$-axis is $x=2t^2+t$ ($x$ in metres, $t$ in seconds). Find the work (in J) done by the net force on the particle during the first $2\ \text{s}$. Give the answer to the nearest integer.
E3. JEE Main · MCQ The linear momentum of a body is increased by $50\%$. Its kinetic energy increases by (A) $50\%$ (B) $100\%$ (C) $125\%$ (D) $150\%$
E4. JEE Main · Numerical A $0.9\ \text{kg}$ body at rest at $x=0$ on a smooth horizontal surface is acted on by a force along $+x$ that rises uniformly from $0$ to $15\ \text{N}$ between $x=0$ and $x=3\ \text{m}$ and then falls uniformly to $0$ at $x=6\ \text{m}$. Find the speed of the body (in m/s) at $x=6\ \text{m}$. Give the answer to the nearest integer.
E5. JEE Main · MCQ A bullet fired into a fixed wooden block loses half of its speed after penetrating $6.0\ \text{cm}$. Assuming a constant resistive force, it will penetrate a further (A) $6.0\ \text{cm}$ (B) $3.0\ \text{cm}$ (C) $1.5\ \text{cm}$ (D) $2.0\ \text{cm}$ before coming to rest.
E6. JEE Main · Numerical A $2\ \text{kg}$ block sliding at $4\ \text{m/s}$ on a smooth horizontal floor runs into a light horizontal spring of spring constant $800\ \text{N/m}$ fixed at its far end. Find the maximum compression of the spring in centimetres. Give the answer to the nearest integer.
Research question. Is the sliding distance of a body really proportional to the square of its launch speed, as the work–energy theorem predicts — and what does the constant of proportionality tell you about friction?
Why it matters. Road-safety engineers, accident investigators and the designers of runway overruns and gravel escape lanes all use $s=u^2/(2\mu g)$. Investigators measure skid marks to estimate how fast a vehicle was going before a crash; lane designers choose a surface whose friction stops a runaway truck within the available length. The square law is why a small increase in speed has a large effect on safety. Testing it yourself shows how well a simple constant-friction model describes a real sliding object.
What to do.
- Choose a flat object that slides well (a box of tiles, a book, a hockey puck) on a long, level floor. Mark a start line and fix a phone above it to film the launch at a known frame rate, with a metre scale in view.
- Flick the object across the start line at different speeds. From the video, find the launch speed (distance moved in a few frames ÷ time). Measure the sliding distance $s$ with a tape.
- Collect at least eight launches over a wide range of speeds. Plot $s$ against $u$, and then $s$ against $u^2$. Which graph is a straight line through the origin?
- From the slope of the $s$–$u^2$ line find $\mu_k=\dfrac{1}{2g\times\text{slope}}$. Check it independently by tilting a board until the object slides down at steady speed ($\mu_k=\tan\theta$).
- Add a known mass on top and repeat a few launches. Does the stopping distance change?
Tools: Phone camera (slow-motion mode helps) and a free video-analysis app or frame-by-frame player, measuring tape, metre scale, spreadsheet for the graphs.
Hand in: A table of $u$ and $s$; both graphs with best-fit lines; your two values of $\mu_k$ and a short paragraph comparing them and explaining why the mass did or did not matter.
Going further. Accident reports quote speeds "from skid marks". Using a typical dry-road $\mu_k\approx0.7$, make a table of skid length against speed from $30$ to $120\ \text{km/h}$, and discuss how uncertain such an estimate is if $\mu_k$ is only known to $\pm0.1$.
🧪 Self-check quiz
Q1. A crate sits on the flat bed of a truck that is accelerating forward, and the crate does not slip. The work done on the crate by friction (in the ground frame) is
Q2. The dimensional formula of work is
Q3. The kinetic energy of a body is doubled. Its momentum becomes
Q4. A body moves along $+x$ under a force whose $F$–$x$ graph lies below the $x$-axis between $x=3\ \text{m}$ and $x=5\ \text{m}$. Over that interval the force
Q5. Two cars on the same road (same $\mu_k$) skid to rest with locked wheels from speeds $u$ and $2u$. The ratio of their skidding distances is