Chapter 20 — Experimental Skills
Every unit of the syllabus ends in a laboratory. JEE Main asks what you would read on a Vernier or a screw gauge with a zero error, which graph turns your readings into a straight line, where a null point should lie and which measurement dominates the error — this chapter collects the experiments and the habits behind them.
A physics laboratory is where the formulas of the other nineteen chapters meet the real world — and where they first meet its errors. A screw gauge whose faces do not quite close, a pendulum that slowly runs down, a capillary tube with a slightly greasy wall, a metre-bridge wire whose ends are not where the scale says they are: each experiment is a small exercise in getting a trustworthy number out of imperfect apparatus. That is a skill every engineer uses, whether calibrating a sensor in a car, checking the thickness of a turbine blade or testing a batch of diodes on a production line.
JEE Main lists twenty-odd experiments and asks about them in a recognisable way: read this instrument, correct for this zero error, interpret this graph, find the quantity from this null point, and say which reading limits the accuracy. This chapter covers them in two sections. First, measuring instruments and the mechanics and heat experiments: Vernier callipers and the screw gauge with their zero errors, the decaying pendulum and its $A^2$–$t$ graph, the metre-scale balance, Young's modulus with Searle's apparatus, surface tension by capillary rise, viscosity by terminal velocity, the resonance tube and the method of mixtures. Second, electricity, optics and electronics experiments: resistivity with a metre bridge, resistance from a $V$–$I$ graph, a galvanometer's resistance and figure of merit by half deflection, focal lengths by the u–v method and parallax, the $i$–$\delta$ curve of a prism, refractive index with a travelling microscope, diode and Zener characteristics, and identifying components from a mixed collection.
- find the least count of Vernier callipers and a screw gauge, read them, and correct a reading for a positive or negative zero error;
- describe how the external and internal diameter and the depth of a vessel, the diameter of a wire and the thickness of a sheet are measured, and how backlash is avoided;
- use the $A^2$–$t$ graph of a lightly damped pendulum to find how much energy it has lost, and use the metre-scale balance to find an unknown mass by moments;
- find Young's modulus with Searle's apparatus, surface tension from capillary rise and viscosity from terminal velocity, and say which measurement dominates the percentage error;
- find the speed of sound and the end correction from two resonance lengths, and a specific heat capacity by the method of mixtures;
- find a resistance and a resistivity with a metre bridge, explain why the null point should be near the middle, correct a $V$–$I$ measurement for the voltmeter, and find a galvanometer's resistance and figure of merit by half deflection;
- find the focal length of a concave mirror, a convex mirror and a convex lens by the u–v method, using parallax to locate images;
- read the $i$–$\delta$ curve of a prism, and find a refractive index with a travelling microscope;
- read the characteristics of a p–n diode and a Zener diode, and identify a diode, an LED, a resistor and a capacitor from simple tests.
You want to measure an unknown resistance $X\approx6\ \Omega$ with a metre bridge, and you may put any one of $R=1$, $6$ or $20\ \Omega$ in the other gap. The null point can be located to $\pm1\ \text{mm}$. Which choice gives the most accurate value of $X$?
Sections in this chapter
Measuring Instruments and Mechanics and Heat Experiments
Vernier callipers and the screw gauge with zero errors, the decaying pendulum, the metre-scale balance, Young's modulus, capillary rise, viscosity, the resonance tube and the method of mixtures.
Electricity, Optics and Electronics Experiments
The metre bridge, Ohm's law, half deflection, focal lengths by the u–v method, the prism's $i$–$\delta$ curve, the travelling microscope, diode characteristics and identifying components.
Eight experiment-based problems drawn from both sections and shuffled, as in the real paper: reading instruments, interpreting graphs, null points and errors; one of them needs an instrument from one section and an experiment from the other. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette.
E1. JEE Main · MCQ A screw gauge has a pitch of $0.5\ \text{mm}$ and $50$ divisions on its circular scale. With the studs touching, the zero of the circular scale lies above the reference line (it has not reached it) and the $47$th division is on the line. Measuring a wire, the main scale shows $2$ divisions ($0.5\ \text{mm}$ each) and the $36$th circular division is on the reference line. The diameter of the wire is (A) $1.33\ \text{mm}$ (B) $1.36\ \text{mm}$ (C) $1.39\ \text{mm}$ (D) $1.86\ \text{mm}$
E2. JEE Main · Numerical In a metre-bridge experiment a $4.0\ \Omega$ resistor is in the left gap and a $50.0\ \text{cm}$ length of wire in the right gap; the null point is at $40.0\ \text{cm}$ from the left end. The diameter of the wire, measured with a screw gauge that has a zero error of $+0.02\ \text{mm}$, gives an observed reading of $0.42\ \text{mm}$. The resistivity of the wire is $x\times10^{-7}\ \Omega\,\text{m}$. Find $x$ to the nearest integer.
E3. JEE Main · MCQ In an experiment on a lightly damped simple pendulum, the amplitude is $10.0\ \text{cm}$ at $t=0$ and $8.0\ \text{cm}$ at $t=20\ \text{s}$, and the graph of the square of the amplitude against time shows that $A^2$ falls by the same factor in every equal interval of time. The amplitude at $t=40\ \text{s}$ is (A) $6.0\ \text{cm}$ (B) $6.4\ \text{cm}$ (C) $4.1\ \text{cm}$ (D) $7.2\ \text{cm}$
E4. JEE Main · Numerical In plotting the $i$–$\delta$ curve for a glass prism, a student finds the same angle of deviation, $40^\circ$, for two different angles of incidence, $35^\circ$ and $65^\circ$. Find the angle of the prism in degrees. Give the answer to the nearest integer.
E5. JEE Main · MCQ On the forward characteristic of a silicon diode, the current is $10\ \text{mA}$ at $0.70\ \text{V}$ and $30\ \text{mA}$ at $0.75\ \text{V}$. The dynamic resistance of the diode in this range is (A) $25\ \Omega$ (B) $70\ \Omega$ (C) $0.4\ \Omega$ (D) $2.5\ \Omega$
E6. JEE Main · Numerical In Searle's experiment the length of the wire, $2.000\ \text{m}$, is measured with a metre scale to $1\ \text{mm}$; its diameter, $0.50\ \text{mm}$, with a screw gauge of least count $0.01\ \text{mm}$; and its extension, $0.50\ \text{mm}$, with a micrometer of least count $0.01\ \text{mm}$. Taking the load as exact, find the maximum percentage error in Young's modulus. Give the answer to the nearest integer.
E7. JEE Main · MCQ To verify Ohm's law, a voltmeter of resistance $900\ \Omega$ is connected directly across a wire, and an ammeter in series with the combination reads $50\ \text{mA}$ when the voltmeter reads $4.5\ \text{V}$. The true resistance of the wire is (A) $100\ \Omega$ (B) $90\ \Omega$ (C) $81\ \Omega$ (D) $110\ \Omega$
E8. JEE Main · Numerical In the u–v experiment with a convex lens, the object pin is $30.0\ \text{cm}$ from the lens, and the image pin shows no parallax with the image when it is $60.0\ \text{cm}$ from the lens on the other side. Find the focal length of the lens in centimetres. Give the answer to the nearest integer.