11.3 Electric Potential and Potential Energy
Fields are vectors, but the work done by an electrostatic field depends only on where a charge starts and ends. That lets us describe the field by a single number at each point — the electric potential $V$, with $V=kq/r$ for a point charge, $E=-dV/dr$, and energy $U=qV$.
Lift a stone and you store energy in it; let it go and the energy comes back as motion. We never need to know the path the stone took — only how high it was lifted. Electrostatic forces behave in exactly the same way. Carry a small charge slowly from one point to another near some fixed charges, and the work you do depends only on the two end points, not on the route. So every point near the charges can be given a number — how much work per coulomb it takes to bring a charge there — and that single number, the electric potential, does the work of the whole vector field in most problems.
Potentials are scalars, so the potential of many charges is a plain sum, with no components and no angles. From the potential we can get the field back by differentiating, find the energy gained by an electron or an alpha particle, explain why the whole of a metal object sits at one potential, and work out the energy stored in an arrangement of charges or in a dipole turned in a field. In this section we build all of these ideas, which carry straight on into capacitors in § 11.4. We use the results of § 11.1 (Coulomb's law, field of a point charge, dipoles) and § 11.2 (Gauss's law, field of a charged shell) and the idea of potential energy from § 4.2.
Electric potential and potential difference
Recall from § 4.2 that a force is conservative when the work it does on a body moving between two points is the same for every path (equivalently, zero round any closed path). Only for such forces can a potential energy be defined. The Coulomb force of a fixed charge on a test charge is directed along the line joining them and depends only on the distance $r$ — like gravity — so the work it does depends only on the starting and finishing distances. By superposition the same holds for the field of any set of fixed charges: the electrostatic field is conservative.
Imagine an external agent moving a small positive test charge $q_0$ from $A$ to $B$ slowly, so that it gains no kinetic energy. The agent's force is then equal and opposite to the electric force $q_0\mathbf E$ at every point, and the work it does equals the increase in the electric potential energy of $q_0$. Dividing by $q_0$ removes any dependence on the test charge.
The potential difference between points $B$ and $A$ in an electrostatic field is the work done by an external agent, per unit positive charge, in carrying a test charge slowly (without acceleration) from $A$ to $B$:
$$V_B-V_A=\frac{W_{A\to B}}{q_0}=-\int_A^B\mathbf E\cdot d\mathbf l .$$It does not depend on the path from $A$ to $B$ or on the size of $q_0$. Its SI unit is the volt: $1\ \text{V}=1\ \text{J/C}$.
The minus sign says that the potential falls as you move along the field. In a uniform field $E$ along $+x$, moving a distance $d$ along the field gives $V_B-V_A=-Ed$. So the field points from high potential to low potential, and the field strength can equally be quoted in $\text{V/m}$ ($1\ \text{V/m}=1\ \text{N/C}$).
Choosing the potential to be zero at infinity (far from all charges), the electric potential $V$ at a point $P$ is the work done by an external agent, per unit positive charge, in bringing a test charge slowly from infinity to $P$:
$$V_P=\frac{W_{\infty\to P}}{q_0}.$$$V$ is a scalar; it may be positive or negative. Its dimensions are $[\text{ML}^2\text{T}^{-3}\text{A}^{-1}]$. A charge $q$ at a point where the potential is $V$ has electric potential energy $U=qV$.
The electron volt is the energy gained by a particle of charge $e$ moving through a potential difference of $1\ \text{V}$: $1\ \text{eV}=1.6\times10^{-19}\ \text{J}$. A charge $q$ falling freely through a potential difference $\Delta V$ gains kinetic energy $|q\,\Delta V|$.
Potential of a point charge. Take a charge $q$ at the origin. The field at distance $r$ is $\mathbf E=\dfrac{kq}{r^2}\hat{\mathbf r}$. Bring the test charge in along a radius from infinity to distance $r$; with $d\mathbf l$ along the radius, $\mathbf E\cdot d\mathbf l=E\,dr'$:
$$V(r)=-\int_\infty^r\frac{kq}{r'^2}\,dr'=\left[\frac{kq}{r'}\right]_\infty^r=\frac{kq}{r}.$$The potential at distance $r$ from a point charge $q$ in vacuum (or air), with $V=0$ at infinity, is
$$V=\frac{kq}{r}=\frac{1}{4\pi\varepsilon_0}\frac{q}{r}.$$The sign of $q$ goes in: $V\gt0$ near a positive charge and $V\lt0$ near a negative one. $V$ falls off as $1/r$, more slowly than the field ($1/r^2$). The same formula gives the potential outside any spherically symmetric distribution of total charge $q$, with $r$ measured from its centre.
Because $U=qV$, energy conservation for a charge moving freely in an electrostatic field reads $K_A+qV_A=K_B+qV_B$. A positive charge speeds up as it moves to lower potential; a negative charge (an electron) speeds up as it moves to higher potential.
The potential at a point $P$ is $+50\ \text{V}$. The work done by an external agent in bringing a charge of $-2.0\ \mu\text{C}$ slowly from infinity to $P$ is
Potential of a system of charges and of a dipole
Work is additive: the work done against the combined field of several fixed charges is the sum of the works done against each field separately. So potentials simply add — as numbers, with their signs.
The potential at a point due to point charges $q_1,q_2,\dots,q_n$ at distances $r_1,r_2,\dots,r_n$ from it is the algebraic sum
$$V=k\sum_{i=1}^{n}\frac{q_i}{r_i}.$$For a continuous distribution, divide it into elements of charge $dq$ at distance $r$ and integrate: $V=k\displaystyle\int\frac{dq}{r}$. For example, every element of a thin ring of radius $R$ and total charge $Q$ is at the same distance $\sqrt{R^2+x^2}$ from a point on the axis at distance $x$ from the centre, so $V=\dfrac{kQ}{\sqrt{R^2+x^2}}$ (and $kQ/R$ at the centre).
Compare this with fields: to add fields you need directions and components; to add potentials you need only distances. A point where $\mathbf E=0$ need not have $V=0$ (the midpoint of two equal positive charges), and a point where $V=0$ need not have $\mathbf E=0$ (the midpoint of a dipole).
Potential of a charged thin spherical shell. In § 11.2 Gauss's law showed that a uniformly charged thin shell of radius $R$ and charge $Q$ has field $kQ/r^2$ outside, as if all the charge were at the centre, and zero field inside. Outside, then, $V=kQ/r$. At the surface $V=kQ/R$. Moving inside costs no work (there is no field), so the potential stays at $kQ/R$ everywhere inside.
For a thin shell of radius $R$ carrying charge $Q$ spread uniformly over it:
$$V=\frac{kQ}{r}\ \ (r\ge R),\qquad V=\frac{kQ}{R}\ \ (r\le R).$$The potential is continuous at the surface and constant (not zero) inside, while the field jumps from $kQ/R^2$ just outside to zero inside.
Potential of an electric dipole. A dipole consists of charges $+q$ and $-q$ a distance $2a$ apart, with dipole moment $\mathbf p$ of magnitude $p=q\times2a$, pointing from $-q$ to $+q$. Take a point $P$ at distance $r$ from the centre, the line to $P$ making angle $\theta$ with $\mathbf p$. Its distances from the two charges are $r_+$ and $r_-$, and
$$V=kq\left(\frac{1}{r_+}-\frac{1}{r_-}\right)=kq\,\frac{r_--r_+}{r_+r_-}.$$When $r\gg a$, the two lines to $P$ are almost parallel, so $r_--r_+\approx2a\cos\theta$ and $r_+r_-\approx r^2$. Hence $V\approx\dfrac{kq\,(2a)\cos\theta}{r^2}$.
At distance $r$ from the centre of a dipole of moment $p$, along a line at angle $\theta$ to $\mathbf p$, for $r\gg a$ (a short dipole):
$$V=\frac{kp\cos\theta}{r^2}=\frac{k\,\mathbf p\cdot\hat{\mathbf r}}{r^2}.$$On the axis, on the side of $+q$ ($\theta=0$): $V=+kp/r^2$; on the side of $-q$ ($\theta=180^\circ$): $V=-kp/r^2$. On the equatorial (perpendicular-bisector) plane ($\theta=90^\circ$): $V=0$ exactly, at every distance. The dipole potential falls as $1/r^2$, faster than that of a single charge.
In Interactive 1 set $q_1=+4\ \text{nC}$ (at $x=-0.10\ \text{m}$) and $q_2=-1\ \text{nC}$ (at $x=+0.10\ \text{m}$). Where on the $x$-axis is the potential zero?
At a point on the equatorial line of a short electric dipole (far from it),
Equipotential surfaces, E = −dV/dr, and conductors
Join up all the points that have the same potential and you get a surface — like a contour line on a map, which joins points of the same height.
An equipotential surface is a surface on which the electric potential has the same value at every point. Equipotentials are usually drawn for equal steps of potential (say every $10\ \text{V}$).
- No work is done by the field (or by an agent) in moving a charge between two points of the same equipotential.
- The electric field at every point is perpendicular to the equipotential through that point, and points towards decreasing potential.
- Where equipotentials (drawn for equal steps $\Delta V$) are closer together, the field is stronger: $E\approx\Delta V/\Delta n$, with $\Delta n$ the perpendicular spacing.
- Two different equipotentials never meet or cross (a point cannot have two potentials, and the field there would need two directions).
Property 2 follows from property 1: if $\mathbf E$ had a component along the surface, moving a charge along it would need work. Some shapes to know: for a point charge, concentric spheres ($r=kq/V$) — for equal steps of $V$ they get farther apart going outwards, because the field weakens; for a uniform field, equally spaced parallel planes perpendicular to the field; for a dipole, a set of closed surfaces round each charge, with the equatorial plane as the $V=0$ surface; for any charged conductor, its own surface (see below).
Getting the field from the potential. Move a short distance $dl$ in some direction. The potential changes by $dV=-\mathbf E\cdot d\mathbf l=-E_l\,dl$, where $E_l$ is the field component in that direction. So $E_l=-dV/dl$: the component of the field in any direction is minus the rate of change of $V$ in that direction. It is largest along the normal to the equipotentials, which is the field's own direction.
The field points in the direction in which $V$ decreases fastest, and its magnitude is the rate of that decrease:
$$E=-\frac{dV}{dr}\quad\text{(along the field line)},\qquad E_x=-\frac{\partial V}{\partial x},\ \ E_y=-\frac{\partial V}{\partial y},\ \ E_z=-\frac{\partial V}{\partial z}.$$Here $\partial V/\partial x$ means: differentiate $V(x,y,z)$ with respect to $x$, treating $y$ and $z$ as constants. In reverse, $V_B-V_A=-\displaystyle\int_A^B\mathbf E\cdot d\mathbf l$; for a uniform field $\mathbf E=E_x\hat{\mathbf i}+E_y\hat{\mathbf j}$, $\ V_B-V_A=-(E_x\Delta x+E_y\Delta y)$.
On graphs: $E_x$ is minus the slope of the $V$–$x$ graph, and $V_A-V_B$ is the area under the $E_x$–$x$ graph from $A$ to $B$. Where $V$ is a maximum or minimum, $E_x=0$; where $V$ is constant over a region, $\mathbf E=0$ there.
Conductors in electrostatics. A metal contains free electrons that move whenever there is a field inside it. When charges are placed on or near a conductor, the free electrons shift for a very short time and then stop. "Electrostatics" means this final state, with nothing moving — and that single fact fixes everything below.
For a conductor in electrostatic equilibrium:
- $\mathbf E=0$ everywhere inside the material (otherwise free electrons would still be moving).
- Any net charge resides on the surface (Gauss's law on a surface just inside the metal encloses zero charge).
- Just outside, $\mathbf E$ is perpendicular to the surface, with magnitude $E=\sigma/\varepsilon_0$, where $\sigma$ is the local surface charge density.
- The whole conductor — inside and surface — is at one potential; its surface is an equipotential.
- In an empty cavity inside a conductor (with no charge in the cavity) the field is zero, whatever the charges and fields outside: electrostatic shielding.
- On an irregular conductor, $\sigma$ (and so the field outside) is largest where the surface is most sharply curved.
Item 6 is easiest to see with two spheres of radii $R_1$ and $R_2$, far apart and joined by a thin wire, so that they form one conductor. Charge flows until their potentials are equal: $kq_1/R_1=kq_2/R_2$, so $q\propto R$. Then $\sigma=q/4\pi R^2\propto1/R$: the smaller sphere has the larger surface charge density and the stronger field. A sharp point is like a very small sphere — its field can become strong enough to ionise the air (about $3\times10^6\ \text{V/m}$ breaks down dry air), which is how lightning conductors leak charge away. Shielding explains why a car or an aircraft is a safe place in a thunderstorm and why sensitive circuits are enclosed in metal boxes. If a charge $q$ is placed inside a cavity of an uncharged conductor, a charge $-q$ is induced on the cavity wall and $+q$ appears on the outer surface.
Along the $x$-axis the potential rises uniformly from $10\ \text{V}$ at $x=0$ to $40\ \text{V}$ at $x=0.10\ \text{m}$. The electric field in this region is
Electric potential energy of charges and of a dipole
So far one charge moved while the others stayed put. Now look at the energy of a whole arrangement of charges — the energy you must supply to build it, and which it can give back if it is allowed to fly apart.
The electric potential energy $U$ of a system of point charges is the work done by an external agent in assembling it — bringing the charges slowly, one at a time, from infinite separation to their positions. It equals the work the electric forces would do if the charges were allowed to separate to infinity.
Bring $q_1$ first: no work, as nothing else is there yet. Then bring $q_2$ to distance $r_{12}$ from it: the work is $q_2\times(kq_1/r_{12})$. A third charge has to be brought against the potentials of both, adding $kq_1q_3/r_{13}+kq_2q_3/r_{23}$, and so on. The total does not depend on the order: every pair appears once.
For two point charges a distance $r$ apart, and for a system of charges (one term for each pair):
$$U=\frac{kq_1q_2}{r},\qquad U=k\sum_{\text{all pairs } i\lt j}\frac{q_iq_j}{r_{ij}}.$$The signs of the charges go in. $U\gt0$ for like charges (work was needed to push them together; they fly apart when released); $U\lt0$ for unlike charges (they attract, and work is needed to separate them). For a charge $q$ placed in the potential $V$ of other, fixed charges, $U=qV$.
Energy conservation, $K+U=\text{constant}$, then answers questions about charges that move. A classic is the distance of closest approach: a positive particle of charge $q$ and kinetic energy $K$ fired straight at a fixed nucleus of charge $Ze$ stops momentarily where $K=kqZe/r_0$, so $r_0=kqZe/K$.
A dipole in a uniform field. In § 11.1 we saw that a dipole of moment $\mathbf p$ in a uniform field $\mathbf E$ feels no net force (the forces $\pm q\mathbf E$ cancel) but a torque $\boldsymbol\tau=\mathbf p\times\mathbf E$, of size $pE\sin\theta$, turning it towards the field. To rotate it slowly from $\theta_1$ to $\theta_2$ an agent must supply an equal and opposite torque, doing work
$$W=\int_{\theta_1}^{\theta_2}pE\sin\theta\,d\theta=pE(\cos\theta_1-\cos\theta_2).$$This work is stored as potential energy. Choosing $U=0$ at $\theta=90^\circ$ (the convenient zero, when the dipole is perpendicular to the field) gives $U(\theta)=-pE\cos\theta$.
A dipole of moment $\mathbf p$ making angle $\theta$ with a uniform field $\mathbf E$ has potential energy
$$U=-pE\cos\theta=-\mathbf p\cdot\mathbf E\qquad(U=0\text{ at }\theta=90^\circ).$$Work done by an external agent in turning it slowly from $\theta_1$ to $\theta_2$: $\ W=U_2-U_1=pE(\cos\theta_1-\cos\theta_2)$. Stable equilibrium at $\theta=0$ ($\mathbf p$ along $\mathbf E$, $U=-pE$, the minimum); unstable equilibrium at $\theta=180^\circ$ ($U=+pE$, the maximum). The torque is zero at both. Turning the dipole from $\theta=0$ to $180^\circ$ needs $W=2pE$. (In a non-uniform field there is also a net force.)
In Interactive 2 set $p=4\times10^{-9}\ \text{C m}$, $E=5\times10^4\ \text{N/C}$ and $\theta_0=60^\circ$. How much work is needed to turn the dipole from $\theta=0$ to $60^\circ$?
1. Dropping the signs. In $V=kq/r$ and $U=kq_1q_2/r$ the charges carry their signs. A negative charge has negative potential near it; unlike charges have negative potential energy. The work by an agent is $q(V_B-V_A)$; the work by the field is $q(V_A-V_B)$ — opposite signs.
2. Treating potential like a vector, or field like a scalar. Potentials add as numbers; fields add as vectors. $V=0$ does not imply $\mathbf E=0$ (dipole's equator), and $\mathbf E=0$ does not imply $V=0$ (midpoint of equal like charges, inside a charged shell).
3. Zero inside a shell. Inside a charged conducting or thin shell the field is zero but the potential is $kQ/R$, the same as on the surface — not zero.
4. The minus sign in $E=-dV/dx$. The field points towards falling potential. On a $V$–$x$ graph, a rising line means a field in the $-x$ direction.
5. Dipole energy zero and work. $U=-pE\cos\theta$ is zero at $90^\circ$, not at $0^\circ$. Work to turn from the stable position is $pE(1-\cos\theta)$, and $2pE$ to turn it round completely — not $pE$.
Two electrons are pushed closer together. The electric potential energy of the pair
Exercises
Take $k=9.0\times10^9\ \text{N m}^2\text{C}^{-2}$, $e=1.6\times10^{-19}\ \text{C}$, $m_e=9.1\times10^{-31}\ \text{kg}$, $m_p=1.67\times10^{-27}\ \text{kg}$ and $V=0$ at infinity unless told otherwise.
- 1 Find the potential at a distance of $0.50\ \text{m}$ from a charge of $5.0\ \text{nC}$.
- 2 At what distance from a charge of $-3.0\ \text{nC}$ is the potential $-27\ \text{V}$?
- 3 Find the work done by an external agent in carrying a $3.0\ \mu\text{C}$ charge slowly from a point at $20\ \text{V}$ to a point at $80\ \text{V}$.
- 4 A proton starting from rest is accelerated through $2.0\ \text{kV}$. Find its kinetic energy in eV and in J, and its final speed.
- 5 A uniform field of $500\ \text{V/m}$ points along $+x$. Find $V_A-V_B$ for $A$ at $x=0.10\ \text{m}$ and $B$ at $x=0.40\ \text{m}$.
- 6 Charges $+6.0\ \text{nC}$ and $-2.0\ \text{nC}$ are at $x=0$ and $x=0.40\ \text{m}$. Find every point on the $x$-axis where $V=0$.
- 7 Charges $+1.0$, $+2.0$ and $-3.0\ \mu\text{C}$ sit at the corners of an equilateral triangle of side $0.30\ \text{m}$. Find the potential at its centre. Is the field there zero too?
- 8 A thin ring of radius $0.30\ \text{m}$ carries $10\ \text{nC}$ spread round it. Find the potential at its centre and at a point on its axis $0.40\ \text{m}$ from the centre.
- 1 A short dipole has moment $6.0\times10^{-11}\ \text{C m}$. Find the potential $0.30\ \text{m}$ from its centre on its axis (on the side of $+q$).
- 2 For the same dipole, find the potential $0.30\ \text{m}$ from the centre along a line at $120^\circ$ to $\mathbf p$.
- 3 How much work is needed to carry a charge along the perpendicular bisector of a dipole from one point to another? Explain.
- 4 For a point charge of $2.0\ \text{nC}$, find the radii of the $60\ \text{V}$ and $30\ \text{V}$ equipotentials and the gap between them. Are equipotentials of a point charge for equal steps of $V$ equally spaced?
- 5 Along the $x$-axis $V=4x^3-6x$ (volts, $x$ in metres). Find $E_x$ at $x=2.0\ \text{m}$ and the points where $E_x=0$.
- 6 $V=2xy+3yz$ (volts, coordinates in metres). Find the magnitude of the field at $(1,1,1)$.
- 7 Two parallel equipotential planes, at $20\ \text{V}$ and $80\ \text{V}$, are $5.0\ \text{cm}$ apart in a uniform field. Find the size and direction of the field.
- 8 Explain why two equipotential surfaces cannot cross, and why field lines meet equipotentials at right angles.
- 1 A thin spherical shell of radius $0.10\ \text{m}$ carries $5.0\ \text{nC}$. Find the potential at $0.050\ \text{m}$ and at $0.30\ \text{m}$ from its centre, and the field at $0.050\ \text{m}$.
- 2 A metal sphere of radius $0.20\ \text{m}$ is at a potential of $3600\ \text{V}$. Find its charge and its surface charge density.
- 3 Air breaks down in a field of $3.0\times10^6\ \text{V/m}$. Find the highest potential to which a metal sphere of radius $5.0\ \text{cm}$ can be charged in air.
- 4 Spheres of radii $6.0\ \text{cm}$ and $2.0\ \text{cm}$, far apart, are joined by a thin wire and share $16\ \text{nC}$. Find the common potential.
- 5 In part 4, find the ratio of the electric field just outside the small sphere to that just outside the large one.
- 6 Explain why the charge on a conductor lives on its outer surface, and why you are safe inside a car struck by lightning.
- 7 A point charge of $2.0\ \text{nC}$ is placed at the centre of an uncharged hollow metal sphere of inner radius $0.10\ \text{m}$ and outer radius $0.15\ \text{m}$. State the charges induced on its two surfaces and find the potential of the metal.
- 1 Find the potential energy of charges $+4.0\ \mu\text{C}$ and $-6.0\ \mu\text{C}$ held $0.20\ \text{m}$ apart.
- 2 How much work must an agent do to pull the charges of part 1 apart to $0.40\ \text{m}$?
- 3 Four charges of $+1.0\ \mu\text{C}$ each are at the corners of a square of side $0.10\ \text{m}$. Find the potential energy of the system.
- 4 An alpha particle (charge $2e$) of kinetic energy $4.0\ \text{MeV}$ is aimed straight at a gold nucleus ($Z=79$), which stays at rest. Find the distance of closest approach.
- 5 Two small spheres, each of mass $2.0\ \text{g}$ and charge $+2.0\ \mu\text{C}$, are released from rest $0.10\ \text{m}$ apart on a smooth horizontal table. Find the speed of each when they are far apart.
- 6 A dipole of moment $2.0\times10^{-8}\ \text{C m}$ is in a uniform field of $5.0\times10^4\ \text{N/C}$. Find the work needed to turn it from its stable to its unstable equilibrium position.
- 7 For the dipole of part 6 at $60^\circ$ to the field, find the torque and the potential energy.
- 8 Show that the net force on a dipole in a uniform field is zero, and explain why its potential energy there depends only on its orientation.
E1. JEE Main · MCQ The electric potential in a region is $V=(3x^2+2y-5z)\ \text{V}$, with $x$, $y$, $z$ in metres. The magnitude of the electric field at the point $(1\ \text{m},1\ \text{m},1\ \text{m})$ is (A) $\sqrt{40}\ \text{V/m}$ (B) $\sqrt{65}\ \text{V/m}$ (C) $\sqrt{38}\ \text{V/m}$ (D) $3\ \text{V/m}$
E2. JEE Main · Numerical A point charge $Q=2.0\ \mu\text{C}$ is fixed. A charge $q=10\ \mu\text{C}$ moves from a point $0.20\ \text{m}$ from $Q$ to a point $0.50\ \text{m}$ from $Q$. Find the work done by the electric field on $q$, in millijoules ($k=9\times10^9\ \text{N m}^2\text{C}^{-2}$). Give the answer to the nearest integer.
E3. JEE Main · MCQ An electric dipole of moment $p$ is in a uniform field $E$, its moment making $60^\circ$ with the field. The work needed to turn it slowly until its moment points opposite to the field is (A) $pE/2$ (B) $2pE$ (C) $3pE/2$ (D) $\sqrt3\,pE/2$
E4. JEE Main · Numerical A proton with kinetic energy $1.8\ \text{MeV}$ is fired from far away straight towards a fixed nucleus of charge $50e$. Find the distance of closest approach in femtometres ($1\ \text{fm}=10^{-15}\ \text{m}$; $k=9\times10^9\ \text{N m}^2\text{C}^{-2}$, $e=1.6\times10^{-19}\ \text{C}$). Give the answer to the nearest integer.
E5. JEE Main · MCQ A hollow metal sphere of radius $R$ carries a charge $Q$. The electric potential at a distance $R/2$ from its centre is (A) zero (B) $2kQ/R$ (C) $kQ/2R$ (D) $kQ/R$
E6. JEE Main · Numerical Charges $1.0\ \mu\text{C}$, $1.0\ \mu\text{C}$ and $2.0\ \mu\text{C}$ are placed at the corners of an equilateral triangle of side $10\ \text{cm}$. Find the work, in millijoules, needed to assemble this arrangement from charges initially far apart ($k=9\times10^9\ \text{N m}^2\text{C}^{-2}$). Give the answer to the nearest integer.
Research question. Can you map the equipotential lines between two electrodes on a sheet of conducting paper, and does the field you work out from them match the pattern expected for two point charges?
Why it matters. Engineers who design high-voltage equipment — power-line insulators, X-ray tubes, the electrodes of electron microscopes, the lenses that steer ion beams in cancer therapy — need to know where the field is strongest, because that is where air or insulation breaks down. Before computers, they built scale models and measured potentials point by point, exactly as you will. Today's simulation software solves the same problem numerically, and its results are still checked against measured equipotential maps. Result 11.17 says the field is perpendicular to the equipotentials and strongest where they crowd together: your map lets you see that directly.
What to do.
- Draw two small circles of conducting (silver or graphite) paint or press two drawing-pin electrodes into a sheet of carbon-coated (resistive) paper about $8\ \text{cm}$ apart. Connect them to a $6\ \text{V}$ battery.
- Connect one lead of a digital voltmeter to the negative electrode and use the other as a probe. Find and mark about eight points where the meter reads $1.0\ \text{V}$; join them into a smooth curve.
- Repeat for $2$, $3$, $4$ and $5\ \text{V}$. You now have an equipotential map.
- Draw field lines crossing every equipotential at right angles. Estimate $E\approx\Delta V/\Delta n$ midway between the electrodes and close to one of them.
- Replace one round electrode with a straight painted bar and repeat. How does the map change near the straight edge and near its ends?
Tools: Resistive (carbon) paper or a conductive-ink drawing, two electrodes, a $6\ \text{V}$ battery, a digital voltmeter with a fine probe, a soft pencil and ruler. A spreadsheet or a short Python script can plot $V=k(q/r_1-q/r_2)$ for comparison.
Hand in: Your equipotential maps with field lines drawn in, your estimates of $E$ at two places, a comparison with the computed pattern for two point charges, and a paragraph explaining where the field is strongest and why.
Going further. Paint a closed ring of conducting paint between the electrodes. Measure the potential at several points inside the ring. What do you find, and which property of conductors (Result 11.19) does it demonstrate?
🧪 Self-check quiz
Q1. The dimensional formula of electric potential is
Q2. Inside a thin spherical shell of radius $R$ carrying charge $Q$ uniformly,
Q3. A charge of $2.0\ \mu\text{C}$ is carried from one point to another on an equipotential surface at $100\ \text{V}$. The work done is
Q4. An electron starting from rest is accelerated through a potential difference of $100\ \text{V}$. Its kinetic energy is
Q5. An electric dipole is free to turn in a uniform electric field. It is in stable equilibrium when the angle between $\mathbf p$ and $\mathbf E$ is