Reference

Glossary

Every technical word in the course and what it means in plain language, with flashcards for practice.

Every technical term in the course, with a plain-language meaning. On every page these words are marked with a dotted underline: hover or tap one to see its meaning. The “Used in” links point to the sections where each term appears.

Flashcards — term ⇄ meaning
Ch 1 · Units and Measurements
TermMeaningUsed in
accuracyHow close a measured value is to the true value (compare precision: how closely repeated readings agree).1.3 5.4 7.1 10.2
base unitA unit of one of the independent base quantities of a system; the SI has seven: m, kg, s, A, K, mol, cd.1.1 1.2 12.1
derived unitA unit formed as a product of powers of base units, such as $\text{kg m s}^{-2}$ (the newton).1.1
dimensional analysisUsing dimensions to check equations, find dimensions of constants, deduce relations between quantities and convert units.1.2 7.3 10.3
dimensional constantA fixed quantity that has dimensions, such as $G$, $h$ or $c$ (unlike pure numbers such as $2\pi$).1.2
dimensional equationAn equation stating the dimensions of a quantity, for example $[F]=[\text{M}\text{L}\text{T}^{-2}]$.1.2 2.3
dimensional formulaAn expression such as $[\text{M}\text{L}\text{T}^{-2}]$ showing the dimensions of a quantity.1.2 4.1 6.1 7.1
dimensionless quantityA quantity with dimensions $[\text{M}^0\text{L}^0\text{T}^0]$, such as strain, refractive index or angle (which still has the unit radian).1.2
dimensionsThe powers to which the base quantities (M, L, T, A, K, mol, cd) must be raised to represent a quantity.1.2
least countThe smallest change an instrument can resolve, usually the value of its smallest division; readings are recorded to this place.1.1 1.3 20.1 20.2
mean absolute errorThe average of the magnitudes of the deviations of repeated readings from their mean, $\Delta\bar a=\tfrac1n\sum|a_i-\bar a|$; the result is quoted as $\bar a\pm\Delta\bar a$.1.3 20.1
parsecThe distance at which $1\ \text{AU}$ subtends one second of arc: $1\ \text{pc}=3.09\times10^{16}\ \text{m}=3.26$ light years.1.1
percentage errorThe relative error expressed as a percentage, $\tfrac{\Delta a}{a}\times100\%$.1.3 5.2 7.1 17.2
physical quantityA property of a body, substance or process that can be measured; its value is a number times a unit, $Q=nu$.1.1 1.2 1.3
Planck lengthThe length $\sqrt{hG/c^3}\approx4\times10^{-35}\ \text{m}$ formed from $h$, $G$ and $c$ alone.1.2
precisionHow finely a quantity is resolved and how closely repeated measurements agree with one another, whether or not they are close to the true value.1.1 1.3 6.1 6.3
principle of homogeneityEvery term of a physically correct equation has the same dimensions; arguments of sin, exp and log are dimensionless.1.2
random errorAn error that varies irregularly in size and sign from reading to reading; it is reduced by averaging many readings.1.3 5.2 20.1
relative errorThe absolute error divided by the measured value, $\Delta a/a$ — a pure number that shows how good a measurement is.1.3 7.1 12.3 20.1
screw gaugeAn instrument that measures small lengths with a fine screw; least count $=$ pitch ÷ number of circular-scale divisions.1.1 1.3 7.1 7.3
SIThe International System of Units, built on seven base units each defined (since 2019) by fixing an exact value of a constant of nature.1.1 1.2 2.1 2.3
significant figuresThe digits of a measured value that are known reliably plus the first uncertain digit.1.1 1.2 1.3 7.5
steradianThe unit of solid angle: a patch of area $A$ on a sphere of radius $r$ subtends $A/r^2$ sr; a whole sphere is $4\pi$ sr.1.1
systematic errorAn error that shifts every reading in the same direction (instrument, method or observer); it is not reduced by repeating the measurement and must be corrected.1.3 2.4 17.1 20.2
Vernier calliperA calliper with a sliding Vernier scale; if $n$ VSD $=(n-1)$ MSD its least count is $1\ \text{MSD}/n$.1.1 1.3 5.4 7.1
zero errorThe reading an instrument shows when the true value is zero (jaws closed). Corrected reading = observed reading − zero error, with its sign.1.1 1.3 20.1 20.2
Ch 2 · Kinematics
TermMeaningUsed in
accelerationThe rate of change of velocity, $a=dv/dt=v\,dv/dx$: the slope of the v–t graph, in $\text{m/s}^2$.1.1 1.2 2.1 2.2
angle of projectionThe angle $\theta$ between the initial velocity of a projectile and the horizontal.2.3 6.2
angular accelerationThe rate of change of angular velocity, $\alpha=d\omega/dt$ (rad/s²); for a particle on a circle $a_t=r\alpha$.2.4 5.4
angular displacementThe angle, in radians, turned through by the radius to a moving particle: $\Delta\theta=\Delta s/r$.2.4 5.4
angular velocityThe rate of change of angle, $\omega=d\theta/dt$ (rad/s); as a vector it points along the axis by the right-hand rule.1.2 2.4 5.2 5.3
average speedTotal distance travelled divided by the time taken; never negative and at least as large as $|\bar v|$.1.1 2.1 2.4 5.4
average velocityDisplacement divided by the time taken, $\bar v=\Delta x/\Delta t$; it has a sign (direction).2.1 2.4 10.1 12.1
centripetal accelerationThe acceleration of a body moving on a circle that points towards the centre, of magnitude $v^2/r=\omega^2r$; it changes only the direction of the velocity.2.4 3.4 5.4 6.1
direction cosinesThe cosines of the angles a vector makes with the $x$, $y$, $z$ axes, $A_x/A$, $A_y/A$, $A_z/A$; their squares add to 1.2.2
displacementThe change of position, $\Delta x=x_2-x_1$: a signed (vector) quantity that depends only on the start and end points.2.1 2.2 2.3 2.4
driftIn a river crossing, the distance a boat is carried downstream from the point directly opposite its start.1.1 2.2 11.4 12.1
frame of referenceA chosen origin, axes with stated positive directions, and a clock, relative to which positions and times are measured.2.1 3.1 3.2 4.1
free fallMotion under gravity alone (air resistance neglected): constant acceleration $g=9.8\ \text{m/s}^2$ downward, for every body.2.1 2.3 3.2 5.4
horizontal projectionA launch with a purely horizontal initial velocity from a height $h$; the body lands after $T=\sqrt{2h/g}$, whatever its speed.2.3
horizontal rangeThe horizontal distance from launch point to landing point; $R=u^2\sin2\theta/g$ on level ground, greatest ($u^2/g$) at $45^\circ$.2.3 5.1
instantaneous velocityThe limit of the average velocity as the interval shrinks to zero, $v=dx/dt$: the slope of the x–t graph.2.1
maximum heightThe greatest height of a projectile above its launch level, reached when $v_y=0$: $H=u^2\sin^2\theta/2g$.2.1 2.3 6.2
non-uniform circular motionMotion on a circle with changing speed; the acceleration has both a centripetal part $v^2/r$ and a tangential part $dv/dt$.2.4 3.4
parallelogram lawRule for adding vectors: drawn from one point, their sum is the diagonal of the parallelogram they form (equivalently, head to tail in a triangle).2.2
period of revolutionThe time $T$ for one complete turn in uniform circular motion; $T=2\pi/\omega=1/\nu$.6.3 13.2 18.2
position vectorThe vector $\mathbf{r}=x\,\hat{\mathbf{i}}+y\,\hat{\mathbf{j}}$ from the origin to a particle; its rate of change is the velocity.2.3 2.4 5.1 5.2
projectileA body that is given an initial velocity and then moves under gravity alone (air resistance neglected), with constant acceleration $g$ downwards.2.1 2.2 2.3 3.1
relative velocityThe velocity of one body as measured by an observer moving with another, $\mathbf{v}_{AB}=\mathbf{v}_A-\mathbf{v}_B$.2.1 2.2 3.3 4.3
resolution of a vectorWriting a vector as a sum of vectors along chosen perpendicular axes, $\mathbf{A}=A_x\hat{\mathbf{i}}+A_y\hat{\mathbf{j}}+A_z\hat{\mathbf{k}}$.2.2
scalar product$\mathbf{A}\cdot\mathbf{B}=AB\cos\theta=A_xB_x+A_yB_y+A_zB_z$, a scalar; zero for perpendicular vectors.2.2 4.1
scalar quantityA quantity fully described by a number and a unit (mass, time, speed, work), combining by ordinary arithmetic.
tangential accelerationThe component of acceleration along the velocity of a body on a curved path, $a_t=dv/dt$; it changes the speed.2.4 3.4 5.4 10.2
time of flightThe time a projectile spends in the air; $T=2u\sin\theta/g$ when it lands at the launch level.2.1 2.3
trajectoryThe path followed by a moving body; for a projectile it is the parabola $y=x\tan\theta-\dfrac{gx^2}{2u^2\cos^2\theta}$.2.3
uniform circular motionMotion on a circle at constant speed; the velocity turns continuously, so the body accelerates towards the centre with $v^2/r$.2.4 3.4 10.1 13.2
uniformly accelerated motionStraight-line motion with constant acceleration, described by $v=u+at$, $s=ut+\tfrac12at^2$, $v^2=u^2+2as$.1.2 2.1 2.3 2.4
unit vectorA vector of magnitude 1 that only gives a direction, $\hat{\mathbf{A}}=\mathbf{A}/A$; along the axes $\hat{\mathbf{i}},\hat{\mathbf{j}},\hat{\mathbf{k}}$.2.2 2.3 2.4 6.1
vector product$\mathbf{A}\times\mathbf{B}$: magnitude $AB\sin\theta$, perpendicular to both by the right-hand rule; zero for parallel vectors.2.2 5.2 13.1 13.2
vector quantityA quantity with magnitude and direction that adds by the triangle law (displacement, velocity, force).2.1
Ch 3 · Laws of Motion
TermMeaningUsed in
angle of frictionThe angle $\lambda$ between the total contact force and the normal when friction is limiting; $\tan\lambda=\mu_s$.3.3 3.4
angle of reposeThe steepest angle of an incline on which a body can stay at rest under gravity alone; $\tan\theta_r=\mu_s$, so it equals the angle of friction.3.3
apparent weightThe normal force from the supporting floor or scale, $N=m(g+a)$ for upward acceleration $a$; zero in free fall.3.2 7.2
Atwood machineTwo masses on a string over a fixed pulley; $a=\dfrac{(m_1-m_2)g}{m_1+m_2}$ and $T=\dfrac{2m_1m_2g}{m_1+m_2}$.3.2 5.4
banking of roadsTilting a curved road or track towards the centre of the curve so that the normal force has a horizontal component that helps provide the centripetal force.3.4
centrifugal forceThe outward pseudo force $m\omega^2r$ that must be added when Newton's laws are used in a rotating frame; no body exerts it.3.4
centripetal forceThe component of the net force on a body moving in a circle that points towards the centre, of size $mv^2/r=m\omega^2r$; it is supplied by real forces such as tension, friction or the normal force.3.4 6.3 7.1 10.2
coefficient of frictionThe dimensionless ratio of friction to normal force for a pair of surfaces: $\mu_s$ for limiting static friction, $\mu_k$ for sliding.1.2 3.3 3.4 4.1
concurrent forcesForces whose lines of action pass through one point; they are in equilibrium when their vector sum is zero.3.1
conical pendulumA bob on a string moving uniformly in a horizontal circle so that the string sweeps out a cone; $\cos\theta=g/(\omega^2L)$.3.4
conservation of linear momentumIf the net external force on a system is zero, its total linear momentum stays constant (also component by component).3.1 5.1 5.2 12.2
constraint relationAn equation linking the positions, velocities and accelerations of connected bodies, found from the constant length of the strings (e.g. $a_A=2a_B$ with a movable pulley).3.2
contact forceThe total force one surface exerts on another where they touch; its perpendicular component is the normal force and its parallel component is friction, $R=\sqrt{N^2+f^2}$.3.2 3.3 3.4 4.3
critical speed at the topThe least speed $\sqrt{gr}$ at the top of a vertical circle for which a body on a string (or inside a loop) stays on its circular path; there gravity alone provides the centripetal force.3.4 4.2 6.3
design speedThe speed $v_0=\sqrt{rg\tan\theta}$ at which a vehicle can take a banked curve with no friction at all.3.4
free-body diagramA sketch of one body on its own with an arrow for every force acting on it, and none of the forces it exerts on other bodies.3.2 3.3 3.4 4.1
ideal stringA massless, inextensible string: the tension is the same all along it and the bodies on it share the same speed along it.3.2
impulse$\mathbf{J}=\int\mathbf{F}\,dt=\mathbf{F}_{\text{av}}\Delta t$, the area under the force–time graph; the impulse of the net force equals the change in momentum.1.1 1.2 3.1 4.3
impulsive forceA large force acting for a very short time (a bat on a ball, a hammer on a nail) whose effect is described by its impulse.3.1 4.3
inertiaThe property of a body by which it resists any change in its state of rest or of uniform motion in a straight line; mass is its measure.1.2 3.1 5.2 5.3
inertial frameA frame of reference in which a body with zero net force on it moves with constant velocity, so that Newton's laws hold as stated.3.1 3.2 3.4 4.1
kinetic frictionFriction between surfaces that are sliding over each other, $f_k=\mu_kN$, opposing their relative velocity.3.3 3.4 4.1 4.2
Lami's theoremFor three concurrent coplanar forces in equilibrium, each force is proportional to the sine of the angle between the other two: $F_1/\sin\alpha=F_2/\sin\beta=F_3/\sin\gamma$.3.1 5.2
limiting frictionThe largest value static friction can take, $\mu_sN$, reached when a body is just about to slide.3.3
linear momentumThe vector $\mathbf{p}=m\mathbf{v}$; for a system, the vector sum of the momenta of its parts. SI unit kg m/s.1.2 3.1 4.1 4.3
movable pulleyA pulley that hangs in a loop of string and moves with its load; with two supporting strands the load moves half as far as the free end.3.2
Newton's third lawForces between two bodies are equal in magnitude and opposite in direction, $\mathbf{F}_{\text{AB}}=-\mathbf{F}_{\text{BA}}$, and act on different bodies.3.1 3.2 3.3 4.3
non-inertial frameA frame of reference that accelerates relative to an inertial frame; Newton's laws hold in it only after pseudo forces are added.3.1 3.2
normal forceThe component of a contact force perpendicular to the surfaces in contact; it pushes, and is as large as needed to stop one body moving into the other.3.1 3.2 3.3 3.4
pseudo forceThe fictitious force $-m\mathbf{a}_0$ added to every body when Newton's second law is used in a frame with acceleration $\mathbf{a}_0$.3.2 3.4 10.2
recoilThe backward motion of a gun (or any body) that pushes something forward; by momentum conservation $V=-\dfrac{m}{M}v$.3.1 5.1 18.1 18.2
rolling frictionThe small resistance to rolling without slipping, caused by deformation at the contact rather than by sliding; far smaller than sliding friction.3.3 4.2
static frictionFriction between surfaces that are not sliding over each other; it adjusts itself to oppose the tendency to slide, up to the limit $\mu_sN$.3.3 3.4 4.1 5.4
superelevationThe height by which the outer rail (or edge) of a curved track is raised above the inner one to bank it.3.4
tensionThe pull of a taut string, rope or cable on a body attached to it, directed along the string away from the body; the same throughout an ideal string.1.2 3.1 3.2 3.3
Ch 4 · Work, Energy and Power
TermMeaningUsed in
ballistic pendulumA block hung on a string that a bullet embeds itself in; from the height of the swing the bullet's speed is found by momentum across the impact and energy afterwards.4.3
coefficient of restitution$e=$ speed of separation $\div$ speed of approach, measured along the line of impact; $e=1$ for elastic and $e=0$ for perfectly inelastic collisions.4.3
conservative forceA force whose work between two points does not depend on the path (zero work round any closed path), so it has a potential energy — e.g. gravity, an ideal spring.4.2 5.4
elastic collisionA collision in which the total kinetic energy of the bodies is the same after the impact as before it ($e=1$).4.3 18.1 18.3
head-on collisionA collision in which both velocities before impact lie along the line of impact, so the motion stays on one straight line.4.3
inelastic collisionA collision in which some kinetic energy is turned into heat, sound or deformation; momentum is still conserved ($0\le e\lt1$).4.3 5.2 11.4
instantaneous powerThe rate of doing work: average $P=\Delta W/\Delta t$, instantaneous $P=dW/dt=\mathbf{F}\cdot\mathbf{v}$, measured in watts.4.2 5.4 10.2 14.3
jouleThe SI unit of work and energy: $1\ \text{J}=1\ \text{N m}$, the work done by a force of $1\ \text{N}$ acting through $1\ \text{m}$ along its own direction.1.1 1.2 4.1 4.2
kilowatt hourA unit of energy (not power): the energy delivered in one hour at $1\ \text{kW}$, $1\ \text{kWh}=3.6\times10^6\ \text{J}$.1.1 4.2 12.1 18.3
kinetic energyThe energy a body has because of its motion, $K=\tfrac12mv^2=p^2/2m$; never negative, independent of the direction of motion.1.2 1.3 3.1 4.1
line of impactThe common normal to the two surfaces at the point of contact in a collision (for spheres, the line of centres); smooth contact forces act along it.4.3
mechanical energyThe sum $E=K+U$ of kinetic and potential energy; constant when only conservative forces do work.4.2 4.3 5.4 6.2
non-conservative forceA force whose work depends on the path taken, such as kinetic friction or air drag; its work round a closed path is not zero, and it changes the mechanical energy.4.2
oblique collisionA collision in which the velocities are not along the line of impact, so the bodies move off in different directions in a plane.4.3
perfectly inelastic collisionA collision in which the bodies stick together and move with a common velocity; the largest kinetic-energy loss momentum conservation allows ($e=0$).4.3 5.2 11.4
potential energyEnergy of position or configuration, defined for a conservative force by $\Delta U=-W$; only differences matter. Near the Earth $U=mgh$; for a spring $U=\tfrac12kx^2$.4.1 4.2 5.4 6.1
reduced mass$\mu=\dfrac{m_1m_2}{m_1+m_2}$; the kinetic energy of relative motion of two bodies is $\tfrac12\mu u_\text{rel}^2$.4.3 9.2 10.2
spring constantThe constant $k$ (in N/m) in Hooke's law $F_s=-kx$ for an ideal spring: the restoring force per unit extension or compression. A stiffer spring has a larger $k$.1.2 4.1 4.2 4.3
stable equilibriumAn equilibrium at a minimum of $U(x)$: a small displacement produces a force back towards it.4.2 10.2 11.1 11.3
unstable equilibriumAn equilibrium at a maximum of $U(x)$: a small displacement produces a force pushing the body further away.4.2 11.3 13.3
variable forceA force whose size or direction changes as the body moves; its work is $\int F\,dx$, the signed area under the $F$–$x$ graph.4.1
wattThe SI unit of power, $1\ \text{W}=1\ \text{J/s}$; $1$ horsepower $=746\ \text{W}$.1.1 4.2 5.4 12.1
work doneFor a constant force, $W=\mathbf{F}\cdot\mathbf{d}=Fd\cos\theta$; for a variable force, $\int\mathbf{F}\cdot d\mathbf{r}$. A scalar, positive when the force has a component along the motion, negative when it opposes it, zero when it is perpendicular.2.2 3.1 4.1 4.2
work–energy theoremThe net work done by all the forces on a particle equals the change in its kinetic energy, $W_\text{net}=K_f-K_i$; valid for constant and variable forces in an inertial frame.4.1 4.2 4.3 5.4
Ch 5 · Rotational Motion
TermMeaningUsed in
angular momentumThe moment of momentum about a point, $\mathbf{L}=\mathbf{r}\times\mathbf{p}$; for rotation about a fixed axis $L=I\omega$. Torque changes it: $\boldsymbol{\tau}=d\mathbf{L}/dt$.1.2 2.2 5.2 5.4
annular discA flat ring-shaped plate (a washer) between radii $R_1$ and $R_2$; about its central axis $I=\tfrac12M(R_1^2+R_2^2)$.5.3
centre of gravityThe point through which the resultant weight of a body acts; it coincides with the centre of mass in a uniform gravitational field.5.1 5.2 20.1
centre of massThe mass-weighted average position of a system, $\mathbf{r}_\text{cm}=\sum m_i\mathbf{r}_i/M$; it moves as if all the mass were there and all the external forces acted on it.2.3 3.1 3.2 3.4
conservation of angular momentumIf the net external torque on a system is zero, its total angular momentum stays constant ($I_1\omega_1=I_2\omega_2$ about a fixed axis).5.2 6.3
couple of forcesTwo equal and opposite forces along parallel lines a distance $d$ apart; zero net force but a torque $Fd$, the same about every point.5.2
flywheelA heavy wheel with a large moment of inertia, used to store rotational kinetic energy and to smooth out changes in a machine's speed.5.2 5.3 5.4
internal forceA force exerted by one part of a system on another part; such forces cancel in action–reaction pairs and cannot change the motion of the centre of mass.3.1 3.2 5.1 5.2
linear mass densityMass per unit length of a rod or wire, $\lambda=dm/dx$, in kg/m.5.1 10.3 10.4
moment armThe perpendicular distance from the reference point (or axis) to the line of action of a force.2.2 5.2
moment of inertiaThe rotational counterpart of mass for a chosen axis, $I=\sum m_ir_i^2$ (or $\int r^2\,dm$), where $r$ is the perpendicular distance from the axis; unit $\text{kg m}^2$.1.2 5.2 5.3 5.4
Newton's second law for rotationFor a rigid body turning about a fixed axis, $\tau_\text{ext}=I\alpha$, with torque and moment of inertia about the same axis.5.4
parallel axes theorem$I=I_\text{cm}+Md^2$: the moment of inertia about any axis equals that about the parallel axis through the centre of mass plus $Md^2$, where $d$ is the distance between the axes.5.3
perpendicular axes theoremFor a plane lamina, $I_z=I_x+I_y$, where $x$ and $y$ lie in the plane, $z$ is perpendicular to it, and all three axes meet at one point.5.3
plane laminaA flat body of negligible thickness whose mass lies in one plane, such as a thin plate, disc, ring or wire frame.5.3
principle of momentsFor a body balanced about a pivot, the sum of the clockwise moments equals the sum of the anticlockwise moments.5.1 5.2 20.1
radius of gyrationThe distance $k$ from an axis at which the whole mass $M$ of a body could be placed without changing its moment of inertia: $I=Mk^2$.5.3
rigid bodyA body in which the distance between every pair of particles stays fixed, whatever forces act on it.2.4 5.1 5.2 5.3
rotation about a fixed axisMotion of a rigid body in which every particle moves in a circle centred on one fixed line, all turning through the same angle in the same time.5.2 5.4
rotational equilibriumThe condition $\sum\boldsymbol{\tau}_\text{ext}=\mathbf{0}$; together with $\sum\mathbf{F}_\text{ext}=\mathbf{0}$ it makes a rigid body be in equilibrium.
rotational kinematicsThe description of rotation by $\theta$, $\omega$ and $\alpha$; for constant $\alpha$: $\omega=\omega_0+\alpha t$, $\theta=\omega_0t+\tfrac12\alpha t^2$, $\omega^2=\omega_0^2+2\alpha\theta$.5.4
rotational kinetic energyThe kinetic energy of a body turning about an axis, $K=\tfrac12I\omega^2=L^2/2I$.5.2 5.3 5.4 9.2
system of particlesA collection of bodies treated together; forces between its members are internal, forces from outside are external.3.1 5.1 5.2 5.3
torqueThe turning effect of a force about a point, $\boldsymbol{\tau}=\mathbf{r}\times\mathbf{F}$, of magnitude $F\,r_\perp$; unit N m.1.2 2.2 3.3 5.1
Ch 6 · Gravitation
TermMeaningUsed in
acceleration due to gravityThe free-fall acceleration $g$ produced by a planet's gravitational field; at the surface $g=GM/R^2$, about $9.8\ \text{m/s}^2$ on the Earth.6.1 10.2
aphelionThe point of an orbit farthest from the Sun (apogee: farthest from the Earth), where the orbiting body moves slowest.6.3
areal velocityThe area swept per unit time by the line from the centre of force to an orbiting body, $\dfrac{dA}{dt}=\dfrac{L}{2m}$; constant for any central force.6.3
bound systemA system whose total mechanical energy is negative, so its parts cannot separate to infinity; a body launched below the escape speed stays bound and falls back or orbits.6.2
eccentricityHow stretched an ellipse is: the centre-to-focus distance divided by $a$; $0$ for a circle, and $r_p=a(1-e)$, $r_a=a(1+e)$.6.3
escape speedThe least launch speed from a planet's surface for a body never to return, $v_e=\sqrt{2GM/R}=\sqrt{2gR}$; about $11.2\ \text{km/s}$ for the Earth.1.2 6.1 6.2 6.3
geostationary orbitA circular equatorial west-to-east orbit with a period of one day (radius about $4.22\times10^7\ \text{m}$), so the satellite stays above one point of the equator.6.3 15.2
gravitational constantThe universal constant $G=6.67\times10^{-11}\ \text{N m}^2\,\text{kg}^{-2}$ in Newton's law of gravitation; the same everywhere and independent of the medium.1.2 6.1
gravitational field intensityThe gravitational force per unit mass on a small test mass, $\mathbf{E}=\mathbf{F}/m$, in N/kg; for a point mass $E=GM/r^2$ towards the mass.6.1
gravitational potentialGravitational potential energy per unit mass at a point, $V=U/m$ (J/kg), a scalar; $V=-GM/r$ for a point mass, with $V=0$ at infinity.4.2 6.2 6.3 7.3
gravitational potential energyThe work needed to assemble a system of masses from infinite separation; for two masses $U=-GMm/r$, negative and rising towards zero as they move apart.4.2 6.2 6.3 7.3
inverse-square lawA law in which a force or field falls off as $1/r^2$ with distance: doubling the distance makes it four times weaker.2.4 6.1 13.1 18.3
law of areasKepler's second law: the line from the Sun to a planet sweeps out equal areas in equal times — a consequence of conservation of angular momentum.5.2 6.3
law of orbitsKepler's first law: every planet moves in an ellipse with the Sun at one focus.6.3
law of periodsKepler's third law: the square of the period is proportional to the cube of the semi-major axis, $T^2=\dfrac{4\pi^2}{GM}a^3$.6.3
orbital velocityThe speed needed for a circular orbit of radius $r$: $v_0=\sqrt{GM/r}$, independent of the satellite's mass.2.4 6.3
perihelionThe point of an orbit nearest the Sun (perigee: nearest the Earth), where the orbiting body moves fastest.6.3
semi-major axisHalf the longest diameter of an ellipse, $a=\tfrac12(r_p+r_a)$; it fixes the period of an orbit.6.3
shell theoremA uniform spherical shell attracts an outside particle as if all its mass were at its centre, and exerts zero net force on a particle anywhere inside it.6.1
universal law of gravitationEvery particle attracts every other particle with a force $F=Gm_1m_2/r^2$ along the line joining them; exact for point masses and for spherically symmetric bodies with $r$ measured between centres.6.1 11.1
Ch 7 · Properties of Solids and Liquids
TermMeaningUsed in
angle of contactThe angle, measured inside the liquid, between the solid surface and the tangent to the liquid surface where they meet; acute if the liquid wets the solid, obtuse if it does not.7.4 20.1
anomalous expansion of waterWater contracts when heated from $0\ ^\circ\text{C}$ to $4\ ^\circ\text{C}$ and expands above that, so its density is greatest at about $4\ ^\circ\text{C}$.7.5
Archimedes' principleA body wholly or partly immersed in a fluid is pushed up by a force equal to the weight of the fluid it displaces.7.2
atmospheric pressureThe pressure of the air at a place, due to the weight of the air above; $1\ \text{atm}=1.013\times10^5\ \text{Pa}=760\ \text{mm Hg}$ at sea level.7.2 7.3 7.4 8.1
Bernoulli's principleAlong a streamline of an ideal fluid in steady flow, $p+\tfrac12\rho v^2+\rho gh$ is constant: where the fluid moves faster, its pressure is lower.1.2 7.3
black bodyAn ideal body that absorbs all radiation falling on it; at any temperature it is also the best possible emitter.7.5
breaking stressThe greatest stress a material can bear before it breaks; the breaking load of a wire is this stress times its cross-sectional area.7.1
bulk modulusPressure increase divided by the fractional decrease in volume, $B=-\dfrac{\Delta p}{\Delta V/V}$; possessed by solids, liquids and gases.7.1 7.2 10.3
buoyant forceThe net upward force of a fluid on an immersed body, equal to the weight of the fluid displaced, $\rho_\text{f}V_\text{sub}g$.5.1 7.2 7.3
capillary riseThe rise (or fall) of a liquid in a narrow tube, $h=2S\cos\theta/\rho gr$ (Jurin's law); water rises in glass, mercury is depressed.7.4 20.1
coefficient of linear expansionThe fractional increase in length per kelvin rise in temperature, $\alpha=\dfrac{\Delta L}{L\,\Delta T}$; for an isotropic solid the area and volume coefficients are $2\alpha$ and $3\alpha$.7.5 10.2
coefficient of viscosityThe internal friction of a fluid; $\eta$ in $F=\eta A\,dv/dx$ for the tangential force between layers. SI unit $\text{Pa s}$.1.2 7.3 7.4 8.3
cohesion and adhesionCohesion is the attraction between molecules of the same substance; adhesion is the attraction between molecules of different substances, such as a liquid and a solid wall.7.4
compressibilityThe reciprocal of the bulk modulus, $1/B$: the fractional decrease in volume per unit increase in pressure.7.1
critical velocityThe speed above which streamline flow becomes turbulent, $v_c=\text{Re}_c\,\eta/\rho D$; the Reynolds number $\text{Re}=\rho vD/\eta$ decides the type of flow.7.3
elastic limitThe greatest stress from which a material still returns to its original dimensions when the load is removed; beyond it there is a permanent set.7.1 10.2 20.1
elasticityThe property of a body by which it regains its original size and shape when the deforming force is removed.7.1 10.3
emissivityThe ratio $e$ ($0\le e\le1$) of the power a surface radiates to that of a black body of the same area and temperature.7.5
equation of continuityFor steady flow of an incompressible fluid the volume flow rate is the same at every cross-section: $A_1v_1=A_2v_2$ — conservation of mass.7.3
excess pressureThe extra pressure on the concave side of a curved liquid surface: $2S/R$ inside a drop or an air bubble in a liquid, $4S/R$ inside a soap bubble.7.4 8.2 10.3
fluidA substance that can flow — a liquid or a gas; at rest it cannot resist a shearing force, so it pushes normally on any surface it touches.1.2 7.1 7.2 7.3
gauge pressurePressure above atmospheric pressure, $p-p_0$; at depth $h$ in an open liquid it is $\rho gh$.7.2 7.3 7.4 9.1
Hooke's lawWithin the proportional limit, stress is proportional to strain; the constant ratio is a modulus of elasticity.4.1 4.2 7.1 7.2
hydrostatic paradoxThe fact that the pressure (and force) on the base of a vessel depends only on the liquid's depth and the base area, not on the vessel's shape or the amount of liquid.7.2
latent heatThe heat needed to change the state of unit mass of a substance at constant temperature and pressure, $Q=mL$; for water $L_f=3.36\times10^5\ \text{J/kg}$ and $L_v=2.26\times10^6\ \text{J/kg}$.1.2 7.5 8.1 8.3
law of flotationA floating body displaces its own weight of the liquid in which it floats; for a uniform body the fraction submerged is $\rho/\rho_\text{f}$.7.2
manometerA U-tube containing a liquid, used to measure a pressure difference (often a gauge pressure) as the difference in height of the liquid in its two arms.7.2 7.3 8.2
meniscusThe curved surface of a liquid in a tube: concave for a liquid that wets the wall (water in glass), convex for one that does not (mercury in glass).7.2 7.4 20.1
modulus of rigidityShearing stress divided by shearing strain, $G=\dfrac{F/A}{\theta}$; only solids have it.7.1
Pascal's lawA change of pressure applied to an enclosed incompressible fluid at rest is transmitted undiminished to every part of the fluid and the walls of its container.7.2
principle of calorimetryIn an isolated system, the heat lost by the hotter bodies equals the heat gained by the colder ones — conservation of energy applied to mixing.7.5 20.1
relative densityThe density of a substance divided by the density of water, $1.0\times10^3\ \text{kg/m}^3$; a pure number.1.2 7.2
specific heat capacityThe heat needed to raise the temperature of $1\ \text{kg}$ of a substance by $1\ \text{K}$: $c=\dfrac{Q}{m\,\Delta T}$, in $\text{J kg}^{-1}\text{K}^{-1}$.1.2 7.4 7.5 8.2
speed of effluxThe speed $v=\sqrt{2gh}$ with which liquid leaves a small hole at depth $h$ below the free surface of a wide open tank.7.3
Stokes' lawThe viscous drag on a small sphere moving slowly through a fluid: $F=6\pi\eta rv$, valid for streamline flow round the sphere.1.2 7.3 20.1
strainFractional deformation: change in length, volume or shape angle divided by the original value. Dimensionless.1.2 7.1 7.5 10.3
streamline flowFlow in which the fluid velocity at every fixed point stays the same in time; fluid particles follow smooth paths (streamlines) that never cross.7.3
stressRestoring force per unit area inside a deformed body, $\sigma=F/A$; tensile, compressive, shearing or hydraulic. Unit: pascal.1.2 3.4 7.1 7.5
surface energyThe extra energy of the molecules in a liquid surface; the work to create new area $\Delta A$ is $S\,\Delta A$, so $S$ is also the surface energy per unit area.7.4
surface tensionThe force per unit length $S=F/L$ acting in a liquid surface across any line drawn in it, pulling the surface together; SI unit N/m.1.1 1.2 7.4 20.1
terminal velocityThe constant velocity reached by a body falling through a fluid when the drag and buoyancy balance its weight; for a sphere $v_t=2r^2(\rho-\sigma)g/9\eta$.7.3 20.1
thermal conductivityThe rate of heat flow through unit area per unit temperature gradient, $k$ in $H=kA\,\Delta T/L$; unit $\text{W m}^{-1}\text{K}^{-1}$.1.2 7.5
thermal resistance$R=\dfrac{L}{kA}$ for a slab, so that $H=\Delta T/R$; resistances add in series, their reciprocals add in parallel.7.5
turbulent flowIrregular flow in which the velocity at a fixed point changes erratically, with eddies and mixing between layers; it sets in above the critical velocity.7.3 8.3
Venturi meterA pipe with a narrow throat and a manometer between the throat and the main pipe; the pressure difference gives the flow rate through Bernoulli's principle.7.3
water equivalentThe mass of water that has the same heat capacity as a given body, $mc/c_\text{w}$.7.5
Young's modulusLongitudinal stress divided by longitudinal strain, $Y=\dfrac{FL}{A\,\Delta L}$; a property of the material.1.2 1.3 7.1 7.5
Ch 8 · Thermodynamics
TermMeaningUsed in
adiabatA curve on the $p$–$V$ diagram followed in a quasi-static adiabatic process, $pV^\gamma=$ constant; steeper than the isotherm through the same point by the factor $\gamma$.8.2 8.3
adiabatic processA process in which no heat is exchanged ($Q=0$), so $\Delta U=-W$. A quasi-static adiabatic change of an ideal gas obeys $pV^\gamma=$ constant.8.1 8.2 8.3 9.1
adiabatic wallA boundary that allows no heat to pass, whatever the temperatures on either side (an ideal insulator). Work can still be done through it.8.1
Carnot cycleThe reversible cycle of two isothermal and two adiabatic steps between a source at $T_1$ and a sink at $T_2$; a Carnot engine has the greatest possible efficiency $\eta=1-T_2/T_1$.8.3
Clausius statementThe second law in the form: no process can have as its sole result the transfer of heat from a colder body to a hotter one — a refrigerator always needs work.8.3
coefficient of performanceThe figure of merit of a refrigerator, $\beta=Q_2/W$, or of a heat pump, $Q_1/W=\beta+1$; it is normally greater than 1. For a Carnot refrigerator $\beta=T_2/(T_1-T_2)$.8.3
cyclic processA process that returns a system to its initial state; $\Delta U=0$ and the net heat equals the net work, the area enclosed on the $p$–$V$ diagram (positive if clockwise).8.1 8.2
diathermic wallA boundary through which heat passes freely, so that systems on either side can come to thermal equilibrium (e.g. a thin metal sheet).8.1
first law of thermodynamicsConservation of energy for heat and work: $Q=\Delta U+W$, where $Q$ is the heat supplied to the system and $W$ the work done by it.8.1 8.3
heat engineA device that, working in a cycle, takes heat $Q_1$ from a hot source, does work $W$ and rejects heat $Q_2$ to a cold sink; $W=Q_1-Q_2$ and its efficiency is $\eta=W/Q_1$.8.2 8.3
heat pumpA refrigerator used for heating: it takes heat from the cold outside and delivers $Q_1=Q_2+W$ indoors, with coefficient of performance $Q_1/W$.8.3
heat reservoirA body so large that it can give out or take in any amount of heat without changing its temperature; an engine's hot reservoir is its source, the cold one its sink.7.5 8.2 8.3
internal energyThe total kinetic and mutual potential energy of the molecules of a system, measured in its centre-of-mass frame. A state function; for an ideal gas it depends on temperature only, $\Delta U=nC_V\Delta T$.4.3 7.5 8.1 8.2
irreversible processA process that cannot be undone without leaving a change in the surroundings — e.g. free expansion, heat flow across a finite temperature difference, friction, mixing. All real processes are irreversible.8.3
isobaric processA process at constant pressure: $W=p\Delta V=nR\Delta T$ and $Q=nC_p\Delta T$ for an ideal gas.8.1 8.2 9.1
isochoric processA process at constant volume. The gas does no work, so the heat supplied all goes into internal energy: $Q=\Delta U=nC_V\Delta T$.8.1 8.2 9.1
isothermA curve on the $p$–$V$ diagram along which the temperature is constant; for an ideal gas a hyperbola $pV=$ constant, with slope $-p/V$.8.2 8.3
isothermal processA process at constant temperature. For an ideal gas $pV$ is constant, $\Delta U=0$ and $Q=W=nRT\ln(V_2/V_1)$.8.1 8.2 8.3 9.1
Kelvin–Planck statementThe second law in the form: no process can have as its sole result the absorption of heat from a single reservoir and its complete conversion into work — no cyclic engine has efficiency 1.8.3
Mayer's relationFor an ideal gas $C_p-C_V=R$: at constant pressure the extra heat per mole per kelvin is the work of expansion, $R$.8.2 9.2
molar heat capacityThe heat needed per mole per kelvin in a given process, $C=\frac{1}{n}\frac{dQ}{dT}$; $C_V$ at constant volume, $C_p$ at constant pressure.8.1 8.2 9.2
quasi-static processA process carried out so slowly that the system passes through a continuous sequence of equilibrium states; only such a process can be drawn as a curve on a $p$–$V$ diagram.8.1 8.3
ratio of specific heats$\gamma=C_p/C_V$, greater than 1: $5/3$ for a monatomic and $7/5$ for a diatomic ideal gas near room temperature.9.2
refrigeratorA heat engine run in reverse: work $W$ is supplied to take heat $Q_2$ from a cold space and deliver $Q_1=Q_2+W$ to the warmer surroundings.7.5 8.2 8.3
reversible processA process that can be reversed so that both the system and its surroundings return exactly to their initial states; it must be quasi-static and free of friction and other dissipation.8.3
state variableA macroscopic quantity ($p$, $V$, $T$, $U$, …) whose value depends only on the present equilibrium state of a system, not on how it got there. Heat and work are not state variables.8.1 8.2
thermal equilibriumThe state of two systems in thermal contact when no net heat flows between them and their state variables no longer change; they are then at the same temperature.7.5 8.1 9.1 9.2
thermodynamic systemA definite quantity of matter or region of space chosen for study; everything outside it that can exchange energy with it is the surroundings. It may be open, closed or isolated.8.1
zeroth law of thermodynamicsIf two systems are each in thermal equilibrium with a third, they are in thermal equilibrium with each other. It is the basis of the concept of temperature and of thermometers.8.1
Ch 9 · Kinetic Theory of Gases
TermMeaningUsed in
Avogadro's numberThe number of molecules (or other entities) in one mole, $N_A=6.022\times10^{23}\ \text{mol}^{-1}$.1.1 9.1 18.3
Boltzmann constantThe gas constant per molecule, $k_B=R/N_A=1.38\times10^{-23}\ \text{J/K}$, so that $pV=Nk_BT$ and the average translational kinetic energy of a molecule is $\tfrac32k_BT$.1.1 1.2 9.1
collision cross-sectionThe target area $\pi d^2$ that a molecule of diameter $d$ presents to others: two molecules collide if their centres pass within a distance $d$.9.2
collision frequencyThe number of collisions a gas molecule makes per second, $z=\bar v/\lambda$; its reciprocal is the mean free time.9.2
degrees of freedomThe number of independent ways a molecule can move and store energy (independent quadratic energy terms): $3$ for a monatomic gas, $5$ for a rigid diatomic or linear molecule, $6$ for a rigid non-linear one; each vibrational mode adds $2$.9.2
diatomic moleculeA molecule of two atoms (N₂, O₂, HCl). Treated as rigid it has $3$ translational and $2$ rotational degrees of freedom, giving $C_v=\tfrac52R$ and $\gamma=\tfrac75$.8.1 8.2 8.3 9.2
equipartition of energyThe classical law that in thermal equilibrium every independent quadratic term in a molecule's energy has, on average, $\tfrac12k_BT$ per molecule ($\tfrac12RT$ per mole).9.2
ideal gasA gas that obeys $pV=nRT$ exactly at every pressure and temperature; real gases approach it at low pressure and high temperature, where the molecules are far apart and hardly attract each other.7.5 8.1 8.2 8.3
kinetic theory of gasesThe model of a gas as a huge number of tiny, freely moving molecules colliding elastically; it explains pressure as molecular impacts on the walls and temperature as average molecular kinetic energy.8.2 9.1 10.3 17.2
mean free pathThe average distance a gas molecule travels between successive collisions, $\lambda=1/(\sqrt2\,\pi d^2n_v)=k_BT/(\sqrt2\,\pi d^2p)$.9.2
monatomic gasA gas whose molecules are single atoms (helium, neon, argon); it has only translational energy, $f=3$, $C_v=\tfrac32R$ and $\gamma=\tfrac53$.8.1 8.2 8.3 9.2
most probable speedThe speed at the peak of the Maxwell distribution, near which the largest number of molecules move: $v_\text{mp}=\sqrt{2RT/M}$, smaller than the average and rms speeds.9.1
partial pressureThe pressure one gas in a mixture would exert if it filled the container alone; by Dalton's law the total pressure of a non-reacting mixture is the sum of the partial pressures.9.1
polyatomic moleculeA molecule of three or more atoms. If rigid and non-linear (H₂O, NH₃, CH₄) it has $3$ translational and $3$ rotational degrees of freedom, so $C_v=3R$ and $\gamma=\tfrac43$; a linear one (CO₂) has only $2$ rotations.9.2
rms speedThe square root of the mean of the squares of the molecular speeds; for an ideal gas $v_\text{rms}=\sqrt{3RT/M}$.9.1 10.3
universal gas constantThe constant $R=8.31\ \text{J mol}^{-1}\text{K}^{-1}$ in $pV=nRT$, the same for every ideal gas; it equals the work done by one mole heated through $1\ \text{K}$ at constant pressure.9.1
Ch 10 · Oscillations and Waves
TermMeaningUsed in
amplitudeThe magnitude $A$ of the largest displacement from the equilibrium position in an oscillation.4.2 6.1 7.5 10.1
angular frequency$\omega=2\pi\nu=2\pi/T$, the rate at which the phase of an SHM increases; measured in rad/s.1.2 10.1 10.2 10.3
angular wave number$k=2\pi/\lambda$ (rad/m): the phase change per metre along a wave, the spatial partner of the angular frequency $\omega$.10.3 15.1
antinodeA point of a standing wave where the amplitude is greatest ($2a$), half-way between two nodes and $\lambda/4$ from each. An open end of a pipe is a displacement antinode.10.4 15.1
beatsThe periodic rise and fall of loudness heard when two sounds of slightly different frequencies superpose; the number of beats per second is $|\nu_1-\nu_2|$.3.2 5.4 10.1 10.4
end correctionThe small distance, about $0.3d$ for a pipe of diameter $d$, by which the displacement antinode lies beyond an open end, so the effective length is $L+0.3d$ per open end.10.4 12.3 20.1
frequencyThe number of complete cycles per second, $\nu=1/T$; measured in hertz (Hz).1.1 1.2 2.4 9.2
fundamental modeThe normal mode of lowest frequency of a vibrating string or air column (the first harmonic): $v/2L$ for a string or open pipe, $v/4L$ for a closed pipe.10.4 19.2
harmonicsThe natural frequencies that are whole-number multiples $n\nu_1$ of the fundamental. Strings and open pipes have all harmonics; a closed pipe has only the odd ones.10.4 20.1
hertzThe SI unit of frequency: $1\ \text{Hz}=1$ cycle per second $=1\ \text{s}^{-1}$.10.1 14.3 15.1 15.2
isochronismThe property of an oscillator whose period does not depend on its amplitude — exact for SHM, and true for a pendulum only at small angles.10.2
Laplace correctionThe recognition that sound compressions in a gas are adiabatic, not isothermal, so the bulk modulus is $\gamma p$ and $v=\sqrt{\gamma p/\rho}$ instead of Newton's $\sqrt{p/\rho}$.10.3
longitudinal waveA wave in which the particles oscillate along the direction of travel, forming compressions and rarefactions (sound). It can travel through solids, liquids and gases.10.3 15.1 16.5
mechanical waveA disturbance that travels through a material medium because of the elastic forces between its parts, carrying energy and momentum but not the medium itself; each particle only oscillates about its own place.10.3 15.2
nodeA point of a standing wave that is always at rest; adjacent nodes are $\lambda/2$ apart. A fixed string end or the closed end of a pipe is a displacement node.10.4 12.2 12.3
oscillatory motionA periodic to-and-fro motion about a fixed equilibrium position, such as a swinging pendulum or a vibrating spring.10.1
overtoneA natural frequency above the fundamental, counted in order: the first overtone is the next one up — the 2nd harmonic of a string or open pipe, but the 3rd harmonic of a closed pipe.10.4 20.1
periodic motionA motion that repeats itself exactly after equal intervals of time; the smallest such interval is the period $T$.10.1 10.3
phase constantThe value $\phi$ of the phase $\omega t+\phi$ at $t=0$; it fixes where the particle is, and which way it moves, at the start.10.1 10.3
principle of superposition of wavesWhen waves overlap, the resultant displacement at each point is the sum of the displacements the separate waves would produce; each wave carries on unchanged afterwards (valid for small amplitudes).10.4 16.5
progressive waveA wave that moves through the medium, carrying energy with it. A sinusoidal one travelling towards +x is $y=a\sin(kx-\omega t+\phi)$, with speed $v=\omega/k$.10.3 10.4 15.1
rarefactionA region of a longitudinal wave where the particles are spread apart, so the density and pressure are below normal; the opposite of a compression.10.3
reference circleA circle of radius $A$ round which a point moves uniformly with angular speed $\omega$; the projection of that point on a diameter performs SHM.10.1
restoring forceA force that always points back towards the equilibrium position; in SHM it is proportional to the displacement, $F=-kx$.4.1 7.1 10.1 10.2
seconds pendulumA simple pendulum whose period is exactly $2\ \text{s}$ (one second per swing); its length is $g/\pi^2\approx0.99\ \text{m}$ on the Earth.10.2
simple harmonic motionOscillation in which the displacement varies sinusoidally with time, $x=A\cos(\omega t+\phi)$; equivalently the acceleration is $a=-\omega^2x$, proportional to the displacement and directed towards equilibrium.7.1 10.1 10.2 10.3
simple pendulumA point-like bob on a light, inextensible string swinging from a rigid support; for small swings $T=2\pi\sqrt{L/g}$.1.2 7.5 10.2 20.1
springs in parallelSprings that share the same extension, so their forces add: $k_p=k_1+k_2$.
springs in seriesSprings joined end to end, so they carry the same force and their extensions add: $\dfrac1{k_s}=\dfrac1{k_1}+\dfrac1{k_2}$.7.1 10.2
standing waveThe pattern formed by two identical waves travelling in opposite directions, e.g. $y=2a\sin kx\cos\omega t$: the shape oscillates in place, the amplitude varies with position, and no energy flows past the nodes.10.4 18.2 20.1
time periodThe time $T$ taken for one complete cycle of a periodic motion, after which the motion repeats; measured in seconds.6.3 10.1 18.2 20.1
transverse waveA wave in which the particles of the medium oscillate perpendicular to the direction in which the wave travels (a wave on a string). It needs a medium that resists shear, so it cannot cross the bulk of a liquid or gas.1.2 10.3 10.4 15.2
wavelengthThe smallest distance between two points of a wave that are always in the same phase, e.g. crest to next crest; $\lambda=v/\nu$.1.1 1.2 7.5 10.3
Ch 11 · Electrostatics
TermMeaningUsed in
area vectorA vector $d\mathbf A=dA\,\hat{\mathbf n}$ whose size is the area of a small flat surface and whose direction is normal to it (outward for a closed surface).11.2 13.2 14.1
capacitanceThe charge stored per unit potential difference, $C=Q/V$, measured in farads; $\varepsilon_0A/d$ for parallel plates in air.1.2 11.4 12.3 14.3
capacitorTwo conductors, insulated from each other, that hold equal and opposite charges $\pm Q$ and so store charge and energy.8.3 10.1 11.1 11.2
charge densityCharge per unit length $\lambda$ (C/m), per unit area $\sigma$ (C/m²) or per unit volume $\rho$ (C/m³) of a continuous charge distribution.11.1 11.2 11.3 11.4
conservation of chargeThe total (algebraic) charge of an isolated system never changes: charge can be moved, or created and destroyed in equal and opposite amounts, but the net charge stays the same.11.1 12.2 14.1
Coulomb's lawTwo point charges at rest attract or repel along the line joining them with force $F=k|q_1q_2|/r^2$, $k=1/4\pi\varepsilon_0=9.0\times10^9\ \text{N m}^2\text{C}^{-2}$.11.1 11.2 11.3 13.1
dielectricAn insulating material in which an electric field produces or lines up molecular dipoles, so that it weakens the field inside it.11.1 11.4 15.1
dielectric constantThe factor $K=E_0/E=\varepsilon/\varepsilon_0$ by which a material reduces an electric field; filling a capacitor with it multiplies the capacitance by $K$.11.1 11.4 15.1
dielectric strengthThe largest electric field a material can withstand without breaking down and conducting; about $3\times10^6\ \text{V/m}$ for dry air.11.4
electric chargeThe property of matter that makes it exert and feel electric forces; positive or negative, like charges repel and unlike attract. SI unit: the coulomb (C).1.1 1.2 11.1
electric dipoleA pair of equal and opposite charges $\pm q$ a small distance $2a$ apart; its field falls off as $1/r^3$.11.1 11.3 13.1 13.3
electric dipole momentThe vector $\mathbf p=q(2a)$ of a dipole, pointing from $-q$ to $+q$; SI unit C m. In a uniform field it feels torque $\boldsymbol\tau=\mathbf p\times\mathbf E$.11.1
electric fieldThe force per unit positive charge at a point, $\mathbf E=\mathbf F/q_0$; a charge $q$ placed there feels $\mathbf F=q\mathbf E$. SI unit N/C (= V/m).1.2 11.1 11.2 11.3
electric field lineA curve whose tangent at every point gives the direction of the electric field; lines start on positive charges, end on negative charges, never cross and crowd together where the field is strong.11.1 13.3 15.1
electric fluxThe amount of electric field passing through a surface, $\Phi_E=\int\mathbf E\cdot d\mathbf A$ ($EA\cos\theta$ for a flat surface in a uniform field); proportional to the net number of field lines crossing it. SI unit N m²/C.11.2 14.1 15.1
electric polarisationThe net electric dipole moment per unit volume of a dielectric, $\mathbf P$ (unit C/m²); it equals the bound charge per unit area on the faces of a slab.11.4
electric potentialThe work done per unit positive charge in bringing a test charge slowly from infinity to a point; a scalar measured in volts. For a point charge $V=kq/r$.1.2 11.3 11.4 12.1
electric potential energyThe work done in assembling a system of charges from infinite separation; for two point charges $U=kq_1q_2/r$, and for a charge in a potential $U=qV$.11.3 11.4 12.1 18.1
electron voltThe energy gained by a particle of charge $e$ moving through a potential difference of $1\ \text{V}$: $1\ \text{eV}=1.6\times10^{-19}\ \text{J}$.1.1 11.3 17.1 18.2
electrostatic shieldingThe fact that the electric field is zero inside an empty cavity of a conductor, whatever the charges and fields outside it.11.3
equipotential surfaceA surface on which the electric potential has the same value everywhere. No work is done moving a charge along it, and the field is perpendicular to it.11.3 12.3
equivalent capacitanceThe single capacitance that stores the same charge as a network across the same voltage: $C_1+C_2+\dots$ in parallel, $1/C=1/C_1+1/C_2+\dots$ in series.11.4
Gauss's lawThe net electric flux out of any closed surface equals the charge enclosed divided by $\varepsilon_0$: $\oint\mathbf E\cdot d\mathbf A=q_{\text{enc}}/\varepsilon_0$.11.1 11.2 11.3 13.1
Gaussian surfaceAny closed surface, real or imaginary, to which Gauss's law is applied; to find a field it is chosen to match the symmetry of the charges.11.2
permittivity of free spaceThe constant $\varepsilon_0=8.85\times10^{-12}\ \text{C}^2\text{N}^{-1}\text{m}^{-2}$ in Coulomb's law, $k=1/4\pi\varepsilon_0$.1.2 11.1
pillboxA short Gaussian cylinder that straddles a charged surface, with its flat end faces parallel to the surface on either side.11.2
polar moleculeA molecule with a permanent electric dipole moment (e.g. H₂O, HCl). In a non-polar molecule (e.g. O₂) a dipole exists only when a field induces it.11.4
potential differenceThe work done per unit positive charge in carrying a test charge slowly from one point to another: $V_B-V_A=-\int_A^B\mathbf E\cdot d\mathbf l$. Unit: volt (J/C).1.2 7.5 11.3 11.4
quantisation of chargeEvery free charge is a whole-number multiple of the elementary charge: $q=ne$ with $e=1.6\times10^{-19}\ \text{C}$.11.1
Ch 12 · Current Electricity
TermMeaningUsed in
balanced bridgeA bridge in which the galvanometer arm carries no current because its two ends are at the same potential; its middle arm may then be removed or replaced by a wire.12.3
balancing lengthIn a metre bridge, the distance $l$ of the null point from the end of the wire next to the left gap.12.3
current densityA vector along the flow whose magnitude is the current per unit area perpendicular to the flow, $j=I/A$ for a uniform current; unit $\text{A/m}^2$.12.1 13.1 19.1
drift velocityThe small average velocity $v_d=eE\tau/m$ that free electrons acquire, opposite to an applied field, on top of their random motion; it gives $I=neAv_d$.12.1
electric currentThe rate of flow of charge through a cross-section, $I=dq/dt$; SI unit the ampere ($1\ \text{A}=1\ \text{C/s}$). Its direction is that of positive-charge flow.1.1 1.2 2.2 7.5
electrical conductivityThe reciprocal of resistivity, $\sigma=1/\rho=ne^2\tau/m$; unit $\text{S/m}$. It links current density and field: $j=\sigma E$.7.5 11.2 12.1 14.2
electromotive forceThe work done by a source's non-electrostatic (e.g. chemical) forces per unit charge carried from its negative to its positive terminal; equal to the terminal voltage on open circuit. Unit: volt.1.2 11.4 12.2 12.3
end errorThe extra resistance at an end of a metre-bridge wire (joins, strips, scale offset), expressed as an equivalent extra length $\alpha$ or $\beta$ of the wire; it changes the balance to $R/X=(l+\alpha)/(100-l+\beta)$.12.3 20.2
equivalent resistanceThe single resistance that would draw the same current from the same potential difference as a whole combination of resistors: $R_\text{eq}=V/I$.1.3 12.2 12.3
internal resistanceThe resistance $r$ of the material inside a cell; it causes the terminal voltage to fall to $\varepsilon-Ir$ when the cell delivers a current $I$.12.2 12.3 14.2 20.2
jockeyThe knife-edge sliding contact that is pressed onto the wire of a metre bridge to find the null point.12.3 20.2
Joule heatingThe conversion of electrical energy into heat in a resistor carrying a current, at the rate $P=I^2R=V^2/R$.12.1 14.2
Kirchhoff's junction ruleThe sum of the currents entering any junction equals the sum leaving it — conservation of charge.12.2
Kirchhoff's loop ruleThe algebraic sum of the changes in potential round any closed loop of a circuit is zero — conservation of energy.12.2 14.2 14.3
maximum power transferA source of internal resistance $r$ delivers the greatest power, $\varepsilon^2/4r$, to an external resistance $R=r$, at $50\%$ efficiency.12.2
metre bridgeA Wheatstone bridge whose ratio arms are the two parts of a uniform 1 m wire on either side of a sliding contact; with $R$ in the left gap, $X=R(100-l)/l$.12.3 20.2
mixed grouping of cellsIdentical cells arranged as $m$ parallel rows of $n$ cells in series; the current $\dfrac{n\varepsilon}{R+nr/m}$ is greatest when $nr/m=R$.12.2
mobilityThe drift speed of a charge carrier per unit electric field, $\mu=v_d/E=e\tau/m$; unit $\text{m}^2\,\text{V}^{-1}\text{s}^{-1}$.12.1 19.1
null pointThe setting (for example the jockey position on a metre bridge) at which the galvanometer shows zero deflection, so the bridge is balanced.6.1 11.1 12.3 20.2
ohmic conductorA conductor whose V–I graph is a straight line through the origin, the same for both directions, so that $V/I$ is constant (at fixed temperature).12.1 20.2
potential dividerResistors in series sharing a voltage in proportion to their resistances: $V_k=\dfrac{R_k}{R_\text{eq}}V$.12.1 12.2 14.1 17.1
ratio armsThe two arms $P$ and $Q$ of a Wheatstone bridge that meet at the galvanometer corner $B$; their ratio fixes the ratio of the other two arms at balance.12.3
relaxation timeThe average time $\tau$ between successive collisions of a free electron with the ions of a conductor, about $10^{-14}\ \text{s}$ in metals.12.1
resistivityThe resistance of a sample of a material of unit length and unit cross-section, $\rho=RA/L$; unit $\Omega\,\text{m}$. It depends on the material and temperature only.12.1 12.3 19.1 20.2
temperature coefficient of resistivityThe fractional change in resistivity per kelvin, $\alpha=\Delta\rho/(\rho_0\Delta T)$; positive for metals, negative for semiconductors.12.1 12.3
terminal voltageThe potential difference between the terminals of a cell: $\varepsilon-Ir$ when discharging, $\varepsilon+Ir$ when being charged, $\varepsilon$ on open circuit.12.1 12.2 14.3
Wheatstone bridgeFour resistors $P$, $Q$, $S$, $R$ in a loop $ABCDA$ with a cell across one diagonal and a galvanometer across the other; it balances (no galvanometer current) when $P/Q=R/S$.12.3
Ch 13 · Magnetic Effects of Current and Magnetism
TermMeaningUsed in
Amperian loopAn imagined closed path chosen so that $\mathbf B$ is tangent to it with constant size (or perpendicular to it, or zero) along each part, so that Ampère's law can be solved for $B$.13.1
Ampère's circuital lawFor steady currents, $\oint\mathbf B\cdot d\mathbf l=\mu_0I_\text{enc}$ round any closed path, where $I_\text{enc}$ is the net current threading the path.13.1 14.2 15.1
bar magnetA straight permanent magnet with a north and a south pole near its ends; outside, its field is that of a magnetic dipole of moment $m=q_m(2l)$, the same as a solenoid of equal moment.13.1 13.3 14.1
Biot–Savart lawThe field of a current element: $d\mathbf B=\dfrac{\mu_0}{4\pi}\dfrac{I\,d\mathbf l\times\hat{\mathbf r}}{r^2}$; the field of a whole circuit is the vector sum over its elements.13.1 13.3 14.2
Curie temperatureThe temperature $T_C$ above which a ferromagnet loses its spontaneous domain alignment and becomes paramagnetic (iron: 1043 K).13.3
Curie's lawFor a paramagnet the susceptibility is inversely proportional to the absolute temperature: $\chi=C/T$.13.3
current elementA tiny straight piece $d\mathbf l$ of a wire multiplied by the current $I$ in it, $I\,d\mathbf l$ — the source of magnetic field in the Biot–Savart law.13.1
current sensitivityThe deflection of a galvanometer per unit current, $\phi/I=NAB/k$.13.2 20.2
diamagnetic substanceA material whose atoms have no permanent magnetic moment; a field induces a weak moment opposite to it ($\chi\lt0$), so it is pushed towards weaker fields. Examples: Bi, Cu, water; a superconductor is a perfect diamagnet.13.3
ferromagnetic substanceA material in which atomic moments line up spontaneously in domains, so a weak field produces a very large magnetisation ($\mu_r\gg1$). Examples: Fe, Co, Ni, Gd.13.3
Fleming's left-hand ruleA memory aid for the force on a current in a field: First finger along the Field, seCond finger along the Current, thuMb gives the Motion (force).13.2
Lorentz forceThe total electromagnetic force on a moving charge, $\mathbf F=q(\mathbf E+\mathbf v\times\mathbf B)$; its magnetic part is perpendicular to $\mathbf v$ and does no work.13.2
magnetic fieldThe vector field $\mathbf B$ around currents and magnets; a charge $q$ moving with velocity $\mathbf v$ in it feels the force $q\mathbf v\times\mathbf B$. SI unit: the tesla.1.2 6.2 10.3 13.1
magnetic susceptibilityThe dimensionless ratio $\chi=M/H$: small and negative for diamagnets, small and positive for paramagnets, very large for ferromagnets.11.4 13.3
magnetisationThe net magnetic moment per unit volume of a material, $\mathbf M=\mathbf m_\text{net}/V$, in A/m; the field inside the material is $\mathbf B=\mu_0(\mathbf H+\mathbf M)$.13.3 14.3
moving-coil galvanometerA current-detecting meter: a coil in a radial magnetic field turns until the magnetic torque $NIAB$ balances a spring's torque $k\phi$, so the deflection $\phi=(NAB/k)I$ is proportional to the current.13.2 14.2 20.2
paramagnetic substanceA material whose atoms carry permanent moments that a field aligns only slightly ($\chi$ small and positive), weakly attracted towards stronger fields. Examples: Al, Pt, O₂.13.3
permeability of free spaceThe constant $\mu_0=4\pi\times10^{-7}\ \text{T m/A}$ that fixes the strength of magnetic fields produced by currents in vacuum.13.1
pitch of a helixThe distance a charged particle moves along the magnetic field in one revolution of its helical path: $v\cos\theta\times2\pi m/qB$.13.2
pole strengthThe quantity $q_m$ (unit A m) assigned to each pole of a magnet in the two-pole model, so that the magnetic moment is $q_m$ times the magnetic length $2l$.13.3
radial magnetic fieldA field directed along radii towards an axis, made by concave pole pieces and a soft-iron core in a galvanometer; it keeps the coil's plane along the field, so the torque does not depend on the deflection.13.2
relative permeability$\mu_r=1+\chi$, the factor by which filling a solenoid with a material multiplies the field inside: $B=\mu_0\mu_rH$.13.3 14.2
shuntA small resistance connected in parallel with a galvanometer to carry most of the current, turning it into an ammeter: $S=I_gG/(I-I_g)$.12.3 13.2 20.2
solenoidA long coil of wire wound as a tight helix; with $n$ turns per metre carrying current $I$ its inside field is uniform, $B=\mu_0nI$, and the outside field is nearly zero.13.1 13.3 14.2 14.3
teslaThe SI unit of magnetic field: $1\ \text{T}=1\ \text{N A}^{-1}\text{m}^{-1}$. The Earth's field is about $5\times10^{-5}\ \text{T}$; $1\ \text{gauss}=10^{-4}\ \text{T}$.13.1 15.1
velocity selectorMutually perpendicular uniform electric and magnetic fields that let through undeflected only particles with speed $v=E/B$, whatever their charge or mass.13.2
voltage sensitivityThe deflection of a galvanometer per unit potential difference across it, $\phi/V=NAB/kG$, where $G$ is the coil's resistance.13.2
Ch 14 · Electromagnetic Induction and Alternating Currents
TermMeaningUsed in
AC generatorA machine that turns a coil steadily in a magnetic field (or a magnet inside coils) to produce an alternating emf $\varepsilon=NBA\omega\sin\omega t$, taken out through slip rings and brushes.14.1 14.3
back emfThe emf induced in a coil by a change of its own current (or in a motor by its own rotation); it opposes the change that causes it.14.2
capacitive reactanceThe opposition of a capacitor to alternating current, $X_C=1/\omega C$, in ohms; it falls as the frequency rises and the current leads the voltage by $90^\circ$.14.3
eddy currentAn induced current circulating in closed loops inside a bulk conductor when the magnetic flux through it changes; it opposes the change and heats the metal.14.1 14.2 14.3
electromagnetic dampingSlowing of a moving conductor (or of a magnet near one) by the forces on the eddy currents induced in it; the force grows with the speed.14.2
electromagnetic inductionThe production of an emf in a circuit whenever the magnetic flux linked with it changes.14.1 14.2
Faraday's law of inductionThe induced emf in a coil equals the negative rate of change of its flux linkage, $\varepsilon=-N\,d\Phi_B/dt$.14.1 14.2 14.3 15.1
flux linkageThe total flux through all the turns of a coil, $N\Phi_B$ for $N$ identical turns.14.1 14.2 14.3
impedanceThe ratio of the rms (or peak) voltage to the rms (or peak) current in an AC circuit; for a series LCR circuit $Z=\sqrt{R^2+(X_L-X_C)^2}$.14.3 15.2
induced currentThe current driven round a closed circuit by an induced emf, $I=\varepsilon/R$ for total resistance $R$.14.1 14.2 14.3
induced emfThe emf produced in a circuit by a change of the magnetic flux through it; by Faraday's law $\varepsilon=-N\,d\Phi_B/dt$.14.1 14.2 14.3
inductive reactanceThe opposition of an inductor to alternating current, $X_L=\omega L=2\pi\nu L$, in ohms; it grows with frequency and the current lags the voltage by $90^\circ$.14.3
inductorA coil designed to have a large self-inductance; it opposes changes of current and stores energy $\tfrac12LI^2$ in its magnetic field.14.2 14.3
laminationA thin insulated sheet of iron; a core built from laminations lying along the field has much smaller eddy-current losses than a solid one.14.2 14.3
Lenz's lawAn induced current always flows in the direction that opposes the change of flux producing it — a consequence of conservation of energy.13.3 14.1 14.2 14.3
magnetic energy densityThe energy stored per unit volume in a magnetic field in vacuum or air, $u_B=B^2/2\mu_0$.14.2 15.1
magnetic fluxThe amount of magnetic field passing through a surface, $\Phi_B=\mathbf B\cdot\mathbf A=BA\cos\theta$, with $\theta$ measured from the normal; measured in webers.1.2 13.3 14.1 14.2
motional emfThe emf across a conductor moving through a magnetic field, $\varepsilon=Blv$ when $l$, $v$ and $B$ are mutually perpendicular.14.1
mutual inductanceThe flux linkage of one coil per unit current in another, $M=N_2\Phi_{21}/I_1$, the same both ways; $\varepsilon_2=-M\,dI_1/dt$.14.2
phasorA rotating arrow whose length is the peak value of a sinusoidal quantity and whose projection on the vertical axis gives its instantaneous value; phase differences appear as angles between phasors.10.1 10.4 14.3
power factorThe factor $\cos\phi$ in the average power $P=V_\text{rms}I_\text{rms}\cos\phi$ of an AC circuit, where $\phi$ is the phase difference between voltage and current; $\cos\phi=R/Z$ for a series circuit.14.3
quality factorA measure of the sharpness of resonance of a series LCR circuit, $Q=\omega_0L/R=\omega_0/\Delta\omega$; at resonance the voltage across $L$ or $C$ is $Q$ times the source voltage.10.2 14.3 15.2
rms valueThe square root of the mean of the square of an alternating quantity over one period; the steady value that gives the same average heating. For a sine wave it is the peak value divided by $\sqrt2$.14.3 15.1 19.2
self-inductanceThe flux linkage of a coil per unit current in it, $L=N\Phi_B/I$; the back emf is $-L\,dI/dt$. For a long solenoid $L=\mu_0N^2A/l$.12.3 14.2 14.3
transformerTwo coils on a common iron core that change an alternating voltage by the turns ratio, $V_s/V_p=N_s/N_p$, while (ideally) conserving power; it does not work on steady DC.13.1 13.3 14.2 14.3
wattless currentThe component $I_\text{rms}\sin\phi$ of an alternating current that is $90^\circ$ out of phase with the voltage; it flows but transfers no average power.14.3
weberThe SI unit of magnetic flux: $1\ \text{Wb}=1\ \text{T m}^2=1\ \text{V s}$.14.1
Ch 15 · Electromagnetic Waves
TermMeaningUsed in
Ampère–Maxwell lawAmpère's law with the displacement current added: $\oint\mathbf B\cdot d\mathbf l=\mu_0 i_c+\mu_0\varepsilon_0\,d\Phi_E/dt$. Currents and changing electric fields both produce magnetic fields.15.1
conduction currentThe ordinary current carried by moving charges in a conductor, as opposed to the displacement current produced by a changing electric field.15.1
displacement current$\varepsilon_0$ times the rate of change of electric flux through a surface, $i_d=\varepsilon_0\,d\Phi_E/dt$. It is not a flow of charge, but it produces a magnetic field exactly as a current does — e.g. in the gap of a charging capacitor.15.1
electromagnetic spectrumThe whole range of electromagnetic waves in order of frequency: radio waves, microwaves, infrared, visible light, ultraviolet, X-rays and gamma rays. All travel at $c$ in vacuum and obey $c=\nu\lambda$.15.2
electromagnetic waveA travelling disturbance of mutually sustaining electric and magnetic fields, produced by accelerated charges. It is transverse, $\mathbf E$ and $\mathbf B$ are in phase, $E_0=cB_0$, and it travels at $c=3.0\times10^8\ \text{m/s}$ in vacuum with no medium needed.7.5 15.1 15.2 16.5
gamma raysThe highest-frequency electromagnetic waves (wavelength below about $10^{-3}\ \text{nm}$), emitted by atomic nuclei; the most penetrating band, used in radiotherapy and for sterilisation.11.1 15.2 17.1 18.3
infrared radiationElectromagnetic radiation just beyond the red end of the visible spectrum ($700\ \text{nm}$ to $1\ \text{mm}$), emitted by warm bodies and vibrating molecules; felt as warmth and used in remote controls, thermal imaging and optical fibres.7.5 15.2 18.2 19.1
intensity of a waveThe average energy a wave carries per unit time across unit area perpendicular to its direction of travel, in $\text{W/m}^2$. For an electromagnetic wave in vacuum $I=\tfrac12\varepsilon_0cE_0^2$; from a point source $I=P/4\pi r^2$.15.1
ionising radiationRadiation whose individual quanta carry enough energy to knock electrons out of atoms — in the electromagnetic spectrum, short-wavelength ultraviolet, X-rays and gamma rays. It can damage living cells.15.2
Maxwell's equationsThe four laws of electromagnetism taken together: Gauss's law for $\mathbf E$, Gauss's law for $\mathbf B$, Faraday's law and the Ampère–Maxwell law. They predict electromagnetic waves travelling at $1/\sqrt{\mu_0\varepsilon_0}$.15.1
microwavesElectromagnetic waves of wavelength about $1\ \text{mm}$ to $0.1\ \text{m}$, produced by magnetrons, klystrons and Gunn diodes; used in radar, microwave ovens, satellite links and Wi-Fi.15.1 15.2 19.3
radiation pressureThe pressure exerted by electromagnetic radiation on a surface because it carries momentum: $I/c$ for normal incidence on a perfect absorber, $2I/c$ on a perfect reflector.15.1
radio wavesElectromagnetic waves of wavelength longer than about $0.1\ \text{m}$ (frequency below about $3\times10^9\ \text{Hz}$), produced by oscillating currents in aerials and received with a tuned LC circuit; used for radio, TV and mobile communication.10.3 15.1 15.2 17.1
ultraviolet radiationElectromagnetic radiation from about $1\ \text{nm}$ to $400\ \text{nm}$, beyond the violet; emitted by the Sun and discharge lamps, largely absorbed by the ozone layer; used to sterilise water, but causes sunburn.15.1 15.2 17.1 17.2
visible lightThe narrow band of electromagnetic waves, about $400$–$700\ \text{nm}$, that the human eye can detect — violet at the short-wavelength end, red at the long.15.1 15.2 17.1 17.2
X-raysElectromagnetic waves of wavelength about $10^{-3}$ to $1\ \text{nm}$, produced when fast electrons strike a metal target; they penetrate soft tissue and are used in radiography and crystallography. They are ionising.1.1 10.3 11.3 15.1
Ch 16 · Optics
TermMeaningUsed in
apparent depthThe depth at which an object under a plane surface appears to lie when viewed nearly along the normal: real depth $\times\,n_\text{observer}/n_\text{object}$ ($h/n$ from air).16.2 20.2
astronomical telescopeA telescope with a long-focus objective lens and a short-focus eyepiece; it gives an inverted image with $M=f_o/f_e$ in normal adjustment.16.3
Brewster's lawAt the angle of incidence $\theta_B$ with $\tan\theta_B=n$ the reflected light is completely plane-polarised and the reflected and refracted rays are perpendicular.16.5
central maximumThe broad bright band in the middle of a single-slit pattern, between the first minima at $a\sin\theta=\pm\lambda$; angular width $2\lambda/a$, linear width $2\lambda D/a$.16.4 16.5
centre of curvatureThe centre of the sphere of which a spherical mirror (or lens surface) is a part; its distance from the pole is the radius of curvature $R$.7.4 16.1 16.2 20.2
coherent sourcesSources emitting waves of the same frequency with a constant phase difference; only coherent sources give a steady interference pattern. Incoherent sources simply add intensities.16.4 16.5
compound microscopeA microscope with a short-focus objective that forms a real, inverted, magnified image and an eyepiece that magnifies it again; $M\approx\dfrac{L}{f_o}\cdot\dfrac{D}{f_e}$ in normal adjustment.16.3
constructive and destructive interferenceConstructive: waves meet in phase (path difference $n\lambda$) and give maximum intensity. Destructive: they meet in antiphase (path difference $(n+\tfrac12)\lambda$) and give minimum intensity.10.4 16.4
critical angleThe angle of incidence in the denser medium for which the angle of refraction is $90^\circ$; $\sin C=n_\text{rarer}/n_\text{denser}$.16.2 16.5
diffractionThe spreading of a wave into the geometrical shadow behind an aperture or obstacle, with a pattern of bright and dark bands; appreciable when the aperture is comparable with the wavelength.15.2 16.3 16.4 16.5
dioptreThe unit of the power of a lens, $P=1/f$ with $f$ in metres: $1\ \text{D}=1\ \text{m}^{-1}$. Converging lenses have positive power.16.2 16.3
eyepieceThe lens of a microscope or telescope nearest the eye; it acts as a simple microscope on the image formed by the objective.16.3 20.1
focal lengthThe distance $f$ from the pole of a mirror (or optical centre of a lens) to its principal focus; for a spherical mirror $f=R/2$. It carries a sign in the Cartesian convention.16.1 16.2 16.3 16.5
fringe widthThe distance $\beta=\lambda D/d$ between consecutive bright (or dark) fringes in Young's experiment; the angular fringe width is $\lambda/d$.16.4 16.5
Huygens' principleEvery point of a wavefront acts as a source of secondary wavelets moving forward at the wave speed; the new wavefront is their forward envelope.16.4 16.5
lateral inversionThe left–right reversal of an image in a plane mirror (strictly, a reversal of front and back along the mirror's normal).16.1
lateral shiftThe sideways displacement of a ray that passes through a parallel-sided slab: $d=t\sin(i-r)/\cos r$; the emergent ray stays parallel to the incident ray.16.2
laws of reflectionThe incident ray, the reflected ray and the normal at the point of incidence lie in one plane, and the angle of reflection equals the angle of incidence (both measured from the normal).16.1 16.4
lens maker's formula$\dfrac1f=\left(\dfrac{n_2}{n_1}-1\right)\left(\dfrac1{R_1}-\dfrac1{R_2}\right)$: the focal length of a thin lens from its refractive index (relative to the surrounding medium) and the radii of its surfaces.16.2
magnifying powerThe ratio $M=\beta/\alpha$ of the angle subtended at the eye by the final image of an instrument to the angle subtended by the object at the unaided eye (object at the near point for a microscope, at its actual place for a telescope).16.3
Malus's lawPlane-polarised light of intensity $I_0$ passing through a Polaroid whose axis makes angle $\theta$ with the vibration direction emerges with intensity $I=I_0\cos^2\theta$.16.5
minimum deviationThe smallest angle of deviation $\delta_m$ produced by a prism, reached when the ray passes symmetrically ($i=e$, $r_1=r_2=A/2$); then $n=\sin\frac{A+\delta_m}{2}\big/\sin\frac A2$.16.2 20.2
near pointThe closest point at which an eye can see an object clearly; for a normal eye it is at $D=25\ \text{cm}$, the least distance of distinct vision.16.3
normal adjustmentThe setting of a microscope or telescope in which the final image is at infinity, so that a normal eye views it relaxed; for a telescope the length is then $f_o+f_e$.16.3
objective (of an instrument)The lens or mirror of a microscope or telescope that faces the object and forms the first, real image.16.3
optical fibreA thin glass or plastic core surrounded by a cladding of lower refractive index, which guides light along its length by repeated total internal reflection.15.2 16.2
optical pathThe product $nL$ of refractive index and distance travelled: the distance light would cover in vacuum in the same time. Phase change along a path $=\dfrac{2\pi}{\lambda_0}\times$ optical path.16.4
paraxial rayA ray close to the principal axis and making a small angle with it; the mirror and lens formulas are exact only for such rays.16.1 16.2 20.2
plane-polarised lightLight whose electric field vibrates along one fixed direction perpendicular to the direction of travel.15.1 16.5
PolaroidA plastic sheet of aligned long-chain molecules that transmits only the electric-field component along its pass axis, turning unpolarised light into plane-polarised light.16.5
principal axisThe straight line through the pole and the centre of curvature of a spherical mirror (for a lens, through both centres of curvature).16.1 16.2
principal focusThe point on the principal axis where paraxial rays parallel to the axis meet after reflection or refraction, or from which they appear to diverge.16.1 16.2 20.2
real imageAn image formed where rays from an object point actually meet after reflection or refraction; it can be caught on a screen.16.1 16.2 16.3 20.2
reflecting telescopeA telescope whose objective is a concave (usually paraboloidal) mirror; free of chromatic aberration. In a Cassegrain design a convex secondary mirror sends the light back through a hole in the primary.16.3
refractive indexThe ratio $n=c/v$ of the speed of light in vacuum to its speed in a medium; the relative index of medium 2 with respect to medium 1 is $n_2/n_1$.1.2 15.1 15.2 16.2
simple microscopeA single convex lens held close to the eye with the object inside its focus; $M=1+D/f$ with the image at the near point, $D/f$ with the image at infinity.7.4 16.3 16.4 20.1
Snell's lawThe law of refraction: $n_1\sin i=n_2\sin r$, with the incident ray, refracted ray and normal in one plane.16.2 16.5
spherical aberrationThe blurring of the focus of a spherical mirror or lens because rays far from the axis cross it closer to the mirror or lens than paraxial rays do.16.1 16.3
total internal reflectionThe complete reflection of light back into a denser medium when it meets the boundary with a rarer medium at an angle of incidence greater than the critical angle.16.2
unpolarised lightNatural light whose electric-field direction changes randomly over all directions perpendicular to the ray; a Polaroid passes half of its intensity at any orientation.16.5
virtual imageAn image formed where rays only appear to come from (their backward extensions meet); it can be seen but not caught on a screen.16.1 16.2 16.3 20.2
wavefrontA surface on which every point of a wave has the same phase at a given instant; rays are perpendicular to it. Point source: spherical; line source: cylindrical; distant source: plane.16.4 16.5 17.1
Young's double-slit experimentInterference of light from two narrow coherent slits a distance $d$ apart on a screen at distance $D$, giving equally spaced bright and dark fringes of width $\beta=\lambda D/d$.16.4 16.5 17.1
Ch 17 · Dual Nature of Matter and Radiation
TermMeaningUsed in
de Broglie relationThe proposal that every particle of momentum $p$ has a wave of wavelength $\lambda=h/p$ associated with it, as photons do.17.2
de Broglie wavelengthThe wavelength $\lambda=h/p=h/mv$ of the matter wave of a particle with momentum $p$; for an electron accelerated through $V$ volts, $\lambda=1.227/\sqrt V$ nm.17.2 18.2
electron microscopeA microscope that uses a beam of accelerated electrons instead of light; their very short de Broglie wavelength lets it resolve details down to atomic size.11.3 16.3 17.2
matter waveThe wave associated with a moving material particle (electron, proton, neutron, atom); it shows up in diffraction and interference, and its intensity gives the probability of finding the particle.17.2 18.2
photoelectric effectThe emission of electrons from a surface (usually a metal) when electromagnetic radiation of high enough frequency falls on it.17.1 19.1
photoelectronAn electron released from a surface by the photoelectric effect.17.1 17.2 18.2
photonA quantum of electromagnetic radiation, with energy $E=h\nu$ and momentum $p=h/\lambda=E/c$; it travels at $c$ and has zero rest mass.15.2 17.1 17.2 18.2
Planck's constantThe fundamental constant $h=6.63\times10^{-34}\ \text{J s}$ linking the energy of a photon to its frequency, $E=h\nu$.1.2 5.2 13.2 17.1
saturation currentThe largest photocurrent for a given beam, reached when every emitted electron is collected; $I_\text{sat}=ne$, proportional to the intensity at fixed frequency.17.1 19.1 20.2
stopping potentialThe negative collector potential $V_0$ at which the photocurrent just becomes zero; $eV_0$ equals the maximum kinetic energy of the photoelectrons.17.1
thermal neutronA neutron in thermal equilibrium with matter near room temperature (energy about $0.025$–$0.04\ \text{eV}$); its de Broglie wavelength, about $0.15\ \text{nm}$, suits diffraction by crystals.17.2
threshold frequencyThe lowest frequency $\nu_0=\phi_0/h$ (longest wavelength $\lambda_0=hc/\phi_0$) of radiation that can release photoelectrons from a given metal.17.1 19.1
wave–particle dualityThe fact that radiation and matter both show wave behaviour (interference, diffraction) in some experiments and particle behaviour (localised packets of energy and momentum) in others.17.1 17.2
work functionThe minimum energy $\phi_0$ needed to remove an electron from the surface of a metal; usually quoted in eV (caesium $2.14\ \text{eV}$, zinc $4.30\ \text{eV}$).17.1 17.2 18.2
Ch 18 · Atoms and Nuclei
TermMeaningUsed in
atomic mass unitOne-twelfth of the mass of a carbon-12 atom: $1\ \text{u}=1.6605\times10^{-27}\ \text{kg}$, equivalent to $931.5\ \text{MeV}$.1.1 18.3
binding energyThe energy needed to pull a nucleus apart into separate nucleons, $E_b=\Delta M\,c^2$. The binding energy per nucleon, $E_b/A$, measures how tightly bound (stable) a nucleus is; it peaks near $8.8\ \text{MeV}$ at $A\approx60$.6.3 18.2 18.3
Bohr radiusThe radius of the ground-state orbit of hydrogen in Bohr's model, $a_0=0.53\ \text{Å}=0.53\times10^{-10}\ \text{m}$.18.2
distance of closest approachThe least distance from a nucleus reached by a charged particle fired head-on at it, where all its kinetic energy has become electric potential energy: $r_0=kqZe/K$ ($2kZe^2/K$ for an alpha particle).11.3 18.1 18.3
excitation energyThe energy needed to raise an atom from its ground state to a given excited state, $E_n-E_1$; $10.2\ \text{eV}$ for the first excited state of hydrogen.18.2
Geiger–Marsden experimentThe experiment (1909) in which a thin gold foil was bombarded with alpha particles and the numbers scattered through different angles were counted; a few were turned back, revealing the atomic nucleus.18.1
ground stateThe stationary state of lowest energy ($n=1$) of an atom; for hydrogen $E_1=-13.6\ \text{eV}$. States of higher energy are excited states.18.2
hydrogen-like atomA nucleus of charge $+Ze$ with a single electron, such as H ($Z=1$), $\text{He}^+$ ($Z=2$) or $\text{Li}^{2+}$ ($Z=3$); Bohr's formulas apply to all of them.18.2
impact parameterThe perpendicular distance of a projectile's initial line of motion from the centre of the target nucleus; the smaller it is, the larger the scattering angle ($b=0$ gives $180^\circ$).4.3 18.1
ionisation energyThe least energy needed to remove the electron completely from an atom in its ground state: $13.6\,Z^2\ \text{eV}$ for a hydrogen-like atom ($13.6\ \text{V}$ is hydrogen's ionisation potential).18.2
isotopeNuclides of the same element: the same atomic number $Z$ but different neutron numbers, e.g. ${}^{12}\text{C}$ and ${}^{14}\text{C}$. Isobars have the same $A$; isotones the same $N$.13.2 18.3
mass defectThe amount by which the mass of a nucleus is less than the total mass of its separate protons and neutrons: $\Delta M=Zm_p+Nm_n-M_\text{nucleus}$.18.3
mass numberThe total number of protons and neutrons in a nucleus, $A=Z+N$; it is the atomic mass in u rounded to the nearest whole number.18.3
nuclear fissionThe splitting of a heavy nucleus (e.g. ${}^{235}\text{U}$ after absorbing a slow neutron) into two middle-sized nuclei and a few neutrons, releasing about $200\ \text{MeV}$; the neutrons can sustain a chain reaction.18.3
nuclear forceThe strong, short-range (a few fm), charge-independent attraction between nucleons that holds a nucleus together; it saturates and becomes repulsive below about $0.8\ \text{fm}$.18.1 18.3
nuclear fusionThe joining of light nuclei into a heavier one, e.g. ${}^{2}\text{H}+{}^{3}\text{H}\to{}^{4}\text{He}+n+17.6\ \text{MeV}$; it needs very high temperatures to overcome the Coulomb repulsion, and powers the stars.18.3
nuclear model of the atomRutherford's model: all the positive charge and almost all the mass of an atom are in a tiny central nucleus, with electrons moving round it and empty space between.18.1
nucleonA proton or a neutron — the particles that make up an atomic nucleus. The number of nucleons in a nucleus is its mass number $A$.18.3
principal quantum numberThe whole number $n=1,2,3,\dots$ that labels a Bohr orbit and fixes its radius ($\propto n^2/Z$) and energy ($\propto -Z^2/n^2$).18.2
Q-valueThe energy released in a nuclear reaction: (mass of reactants $-$ mass of products)$\times c^2$; positive for an exothermic reaction, negative for an endothermic one.18.3
Rydberg constantThe constant $R=1.097\times10^7\ \text{m}^{-1}$ in the formula $1/\lambda=RZ^2(1/n_f^2-1/n_i^2)$ for the wavelengths of hydrogen-like spectra.18.2
scattering angleThe angle $\theta$ between the direction in which a projectile approaches a target and the direction in which it leaves.18.1
series limitThe shortest wavelength of a spectral series, for a jump from $n=\infty$ to the series' lower level: $\lambda=n_f^2/RZ^2$.18.2
spectral seriesThe set of spectral lines produced by jumps ending on the same lower level: Lyman ($n_f=1$, ultraviolet), Balmer ($n_f=2$, visible), Paschen ($n_f=3$, infrared), and so on.18.2
stationary stateIn Bohr's model, an allowed orbit with angular momentum $nh/2\pi$ in which the electron has a definite energy and does not radiate.18.2
Thomson's model of the atomThe early picture of an atom as a sphere of uniformly spread positive charge with electrons embedded in it; ruled out by the large-angle scattering of alpha particles.18.1
Ch 19 · Electronic Devices
TermMeaningUsed in
analogue signalA signal (voltage or current) that varies continuously and can take any value within a range.19.3
band gapThe energy $E_g$ between the top of the valence band and the bottom of the conduction band, where no electron energies are allowed: $0$ for metals, below about $3\ \text{eV}$ for semiconductors (Si $1.1\ \text{eV}$), larger for insulators.17.1 19.1 19.2 20.2
barrier potentialThe potential difference $V_0$ across the depletion region of a p–n junction (n side higher), about $0.7\ \text{V}$ for silicon and $0.3\ \text{V}$ for germanium.19.1
Boolean expressionA formula in 0/1 variables using OR ($A+B$), AND ($A\cdot B$) and NOT ($\overline{A}$), describing the output of a logic circuit.19.3
breakdown voltageThe reverse voltage at which a diode's reverse current suddenly rises; for a Zener diode it is the sharply defined voltage $V_Z$ that it holds while conducting in reverse.19.2 20.2
De Morgan's theorems$\overline{A+B}=\overline{A}\cdot\overline{B}$ and $\overline{A\cdot B}=\overline{A}+\overline{B}$: break the bar and change the sign.19.3
depletion regionThe thin layer on both sides of a p–n junction that has lost its mobile carriers and contains only fixed ions — negative on the p side, positive on the n side.19.1 19.2
digital signalA signal that takes only two levels, high and low, written as the bits 1 and 0.19.3
dynamic resistanceThe reciprocal of the slope of a device's I–V curve at an operating point, $r_d=\Delta V/\Delta I$; for a forward-biased diode above the knee it is only a few ohms.12.1 19.1 20.2
energy bandA range of closely spaced allowed electron energies in a solid. The valence band holds the bonding electrons; the conduction band above it holds electrons that are free to move through the crystal.19.1
extrinsic semiconductorA semiconductor doped with impurity atoms: pentavalent donors (P, As, Sb) give n-type material, trivalent acceptors (B, Al, Ga, In) give p-type material.19.1
forward and reverse biasForward bias connects the p side of a junction to the higher potential, lowering the barrier and allowing a large current; reverse bias does the opposite, widening the depletion region and leaving only a tiny minority-carrier current.19.1 19.2 19.3 20.2
ideal diodeA model of a diode as a perfect one-way switch: zero resistance and zero voltage drop when forward biased, no current at all when reverse biased.19.2
intrinsic semiconductorA perfectly pure semiconductor, in which every free electron comes from a broken bond and leaves a hole, so $n_e=n_h=n_i$.19.1
light-emitting diodeA forward-biased p–n junction in which electron–hole recombination emits photons of energy about $E_g$, so $\lambda\approx1240/E_g$ nm with $E_g$ in eV.19.2
logic gateA digital circuit with one or more inputs and one output whose value (0 or 1) is fixed by the present inputs according to a logical rule, e.g. OR, AND, NOT, NAND, NOR.19.3
majority carrierThe more numerous mobile charge carriers in a doped semiconductor (electrons in n-type, holes in p-type); the less numerous ones are the minority carriers, with $n_{\text{min}}=n_i^2/n_{\text{maj}}$.19.1
mass-action lawIn a semiconductor in thermal equilibrium, $n_en_h=n_i^2$ whatever the doping: adding majority carriers reduces the minority carriers in proportion.19.1
peak inverse voltageThe largest reverse voltage a diode in a rectifier must withstand: $V_m$ for half-wave and bridge rectifiers, $2V_m$ for a centre-tap rectifier.19.2
photodiodeA reverse-biased p–n junction exposed to light; photons with $h\nu\ge E_g$ create electron–hole pairs that add a reverse current proportional to the light intensity.15.2 19.1 19.2
positive logicThe convention in which the higher voltage level stands for 1 and the lower level (near 0 V) for 0.19.3
rectifierA circuit of one or more diodes that converts alternating current into current in one direction only: half-wave (output at the input frequency $f$) or full-wave (output at $2f$).19.2
rippleThe small periodic variation left on the d.c. output of a rectifier after filtering; it repeats at the output frequency and shrinks as the filter time constant $R_LC$ grows.1.2 10.3 16.4 19.2
solar cellAn unbiased, large-area p–n junction that turns light into electrical power; its I–V curve runs from the short-circuit current $I_{sc}$ to the open-circuit voltage $V_{oc}$.17.1 19.1 19.2
timing diagramA graph of the inputs and output of a logic circuit against time, each drawn as a square waveform at the high (1) or low (0) level.19.3
truth tableA table listing the output of a logic circuit for every possible combination of its inputs; $n$ inputs need $2^n$ rows.19.3
universal gateA gate from which every other logic function can be built; NAND and NOR are universal gates.19.3
voltage regulatorA circuit that keeps the voltage across a load nearly constant despite changes in the input voltage or the load, e.g. a Zener diode in parallel with the load, fed through a series resistor.19.2
Zener diodeA heavily doped p–n junction designed to work in reverse breakdown, where its voltage stays almost exactly at the Zener voltage $V_Z$ over a wide range of current.19.1 19.2 20.2
Ch 20 · Experimental Skills
TermMeaningUsed in
backlash errorThe lag of a worn screw when its direction of rotation is reversed: the scale turns a little before the spindle moves. Avoided by turning the screw in one direction only.20.1
damped oscillationAn oscillation whose amplitude decreases with time because friction or drag removes energy; for light damping the energy is proportional to the square of the current amplitude.10.1 20.1
depth rodThe thin rod that slides out of the end of Vernier callipers; with the end of the main scale on the rim, it measures the depth of a vessel or hole.20.1
figure of meritThe current needed to deflect a galvanometer by one division, $k=I/\theta$ (A/div); the reciprocal of its current sensitivity.13.2 16.3 20.2
half-deflection methodFinding a galvanometer's resistance by shunting it until its deflection halves while a large series resistance $R$ is kept fixed: $G=RS/(R-S)\approx S$.20.2
i–δ curveThe graph of the angle of deviation against the angle of incidence for a prism: it falls to a minimum, where $i=e$, and then rises.
method of mixturesFinding a specific heat capacity by mixing a hot body with a cold liquid in a calorimeter and equating the heat lost to the heat gained.7.5 20.1
multimeterA meter that measures voltage, current or resistance on selectable ranges; on a resistance range it identifies resistors, diodes, LEDs and capacitors.11.4 12.1 12.2 13.1
resonance tubeA tube with an adjustable water level forming a closed air column; the first two resonance lengths with a tuning fork give the speed of sound, $v=2f(l_2-l_1)$.10.4 20.1
rheostatA variable resistor (a resistance wire with a sliding contact) used to control the current in a circuit or, as a potential divider, the voltage applied.12.1 13.2 20.2
Searle's apparatusTwo identical wires hung from one support — a reference wire with the main scale and an experimental wire with the Vernier and the load — used to measure a wire's extension and Young's modulus.20.1
travelling microscopeA microscope with cross-wires that slides along a main scale with a Vernier; the difference of two readings gives a small distance, typically to 0.01 mm.1.3 7.4 16.2 16.4
u–v methodFinding the focal length of a mirror or lens by locating images of an object pin at several distances with an image pin (no parallax) and using the mirror or lens formula, or a $u$–$v$ graph.20.2