Chapter 11 · Introduction

Chapter 11 — d- and f-Block Elements

Fill an inner (n−1)d subshell and you get metals that are hard, high-melting, coloured, magnetic, catalytic and able to exist in many oxidation states; fill a deeper 4f or 5f subshell and you get the lanthanoids and actinoids. One number — the count of d (or f) electrons — explains most of it.

Look at the metals around you and most of them come from the middle of the periodic table: the iron and chromium of stainless steel, the copper of electric wires, the titanium of aircraft frames and hip implants, the nickel and cobalt of a phone battery. Their compounds are just as striking. A solution of copper sulphate is blue, nickel salts are green, potassium permanganate is a deep purple that turns colourless the instant it oxidises something — which is why it is its own indicator in a titration — and orange dichromate turns green in the breath-analysers once used to catch drunk drivers. Iron metal is pulled hard by a magnet; many of its salts are pulled weakly; zinc salts are not pulled at all. The catalytic converter of a car runs on platinum, palladium and rhodium, and the ammonia that feeds half the world is made over iron.

All of this follows from one structural fact: the transition elements are filling an inner $(n-1)d$ subshell. The chapter starts with their configurations (and the exceptions Cr and Cu) and the trends across the first series — small, nearly equal radii, high melting points, a slowly rising ionisation enthalpy, many oxidation states peaking at manganese, and the electrode potentials that explain why copper alone does not dissolve in dilute acid. A partly filled d subshell then explains colour (d–d transitions), paramagnetism with the spin-only formula $\mu=\sqrt{n(n+2)}\ \mathrm{BM}$, catalytic activity, complex formation, interstitial compounds and alloys, and you will meet the two oxidising agents of the analytical laboratory, potassium dichromate and potassium permanganate — their preparation, their reactions in different media and the titrations built on them. The chapter ends with the lanthanoids and actinoids, which fill $4f$ and $5f$: their configurations, oxidation states, and the lanthanoid contraction that makes zirconium and hafnium near twins. Spin-only moments, d counts and permanganate stoichiometry are among the most reliable scoring questions of JEE Main inorganic chemistry, and Chapter 12 is built directly on this one.

$(n-1)d^{1\text{–}10}ns^{1\text{–}2}$→Radii, melting points→Ionisation enthalpies→Oxidation states→$E^{\circ}(\mathrm{M^{2+}/M})$→Colour, $\mu=\sqrt{n(n+2)}$→Catalysis, complexes, alloys→$\mathrm{K_{2}Cr_{2}O_{7}}$→$\mathrm{KMnO_{4}}$→Lanthanoids, actinoids→Lanthanoid contraction
🎯 By the end of this chapter you can…
  • define a transition element, decide whether Zn, Cd, Hg, Sc or Cu count as one, and write the configurations of the 3d atoms and their ions (Cr and Cu exceptions; ions lose $4s$ first);
  • explain the trends in metallic radius, melting point, enthalpy of atomisation, density and ionisation enthalpy across the first transition series;
  • list the oxidation states of Sc to Zn, find the oxidation state and $d$ count of the metal in any compound, and relate the acidic character of an oxide to the metal's oxidation state;
  • explain the trend in $E^{\circ}(\mathrm{M^{2+}/M})$, the positive value for copper, and why $\mathrm{Mn^{3+}}$ and $\mathrm{Co^{3+}}$ oxidise while $\mathrm{Cr^{2+}}$ reduces;
  • predict whether an ion is coloured, calculate its spin-only magnetic moment and work back from a measured moment to the number of unpaired electrons;
  • explain catalytic behaviour, complex formation, interstitial compounds and alloy formation in terms of the d subshell;
  • write the preparation and the main oxidising reactions of $\mathrm{K_{2}Cr_{2}O_{7}}$ and $\mathrm{KMnO_{4}}$, use the chromate–dichromate equilibrium, and solve redox titrations with the right number of electrons in each medium;
  • write the configurations and oxidation states of the lanthanoids and actinoids, count $f$ electrons in their ions, and explain the lanthanoid contraction and its consequences;
  • solve JEE Main MCQ and numerical-answer problems on the d- and f-block elements.

How many unpaired electrons does a ground-state chromium atom ($Z=24$) have?

Choose Cr and the atom (state $0$). The boxes show $3d^{5}\,4s^{1}$: one electron has moved from $4s$ to make a half-filled $3d$ subshell, so all $6$ electrons are unpaired and the spin-only formula gives $6.93\ \mathrm{BM}$ (Sections 11.1 and 11.2). Now choose $+3$: chromium loses the $4s$ electron and two $3d$ electrons, leaving $3d^{3}$ — $3$ unpaired, $3.87\ \mathrm{BM}$, a violet aqua ion. Try copper too: the atom is $3d^{10}4s^{1}$ with $1$ unpaired electron, $\mathrm{Cu^{+}}$ is $3d^{10}$ and colourless.
Teaser — Count the d Electrons

Choose a first-row transition element and one of its oxidation states ($0$ is the free atom). The lab fills the $3d$ and $4s$ boxes — an ion loses its $4s$ electrons first — counts the unpaired electrons, computes the spin-only moment $\mu=\sqrt{n(n+2)}\ \mathrm{BM}$ and says whether a d–d transition can make the ion coloured. Press Play to step through the elements.

Cr
configuration—
unpaired electrons $n$—
spin-only $\mu$—
colour—

Sections in this chapter

🎯 Chapter mixed test JEE Main · MCQJEE Main · Numerical

Eight problems drawn from all three sections and shuffled, as in the real paper; several need two sections at once. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette. In every problem, find the oxidation state first and the d (or f) count second.

E1. JEE Main · MCQ Which statement about the first transition series is correct? (A) Zinc has the highest melting point of the series. (B) The highest oxidation state shown by iron in its compounds is $+8$. (C) Manganese shows the largest number of oxidation states, up to $+7$. (D) Scandium forms a stable $+2$ ion in water.

(A), (D) Melting points peak in the middle of the series, where most unpaired d electrons take part in metallic bonding; zinc, $3d^{10}4s^{2}$, melts low. Scandium's only state in water is $+3$ ($d^{0}$). Both false (Section 11.1).
(B), (C) The number of states rises to manganese, which can use all seven $3d+4s$ electrons ($+2$ to $+7$), and then falls as the d electrons pair up; iron reaches only $+6$.
Answer (C).
⏱ Shortcut Up to Mn the highest state equals the group number (Sc $+3$ … Mn $+7$); after Mn it is less.

E2. JEE Main · Numerical The first-row transition element whose atom has the ground-state configuration $\mathrm{[Ar]}\,3d^{5}4s^{1}$ forms the ion $\mathrm{M^{3+}}$. If the spin-only magnetic moment of $\mathrm{M^{3+}}$ is $\mu$ BM, find $\mu^{2}$. Give the answer to the nearest integer.

Identify $18+5+1=24$: chromium, one of the two exceptions of the series (Section 11.1).
The ion Remove the $4s$ electron first, then two $3d$: $\mathrm{Cr^{3+}}=\mathrm{[Ar]}\,3d^{3}$, with $n=3$ unpaired electrons.
Moment $\mu=\sqrt{n(n+2)}=\sqrt{15}=3.87\ \mathrm{BM}$ (Section 11.2), so $\mu^{2}=15$.
Answer $15$.
⏱ Shortcut $\mu^{2}=n(n+2)$ directly. Taking three electrons from $3d^{5}$ alone ($3d^{2}4s^{1}$) gives $n=3$ by luck here but fails for other ions — always empty $4s$ first.

E3. JEE Main · MCQ Which statement about the f-block elements is correct? (A) The basic strength of the hydroxides increases from $\mathrm{La(OH)_{3}}$ to $\mathrm{Lu(OH)_{3}}$. (B) $+3$ is the characteristic oxidation state of every lanthanoid, and cerium also shows $+4$. (C) The actinoids show a smaller range of oxidation states than the lanthanoids. (D) $4f$ electrons shield the outer electrons from the nuclear charge very effectively.

Contraction $4f$ electrons shield poorly, so the radii shrink from La to Lu (the lanthanoid contraction) — (D) is false. Smaller $\mathrm{Ln^{3+}}$ ions polarise $\mathrm{OH^{-}}$ more, so basicity decreases from $\mathrm{La(OH)_{3}}$ to $\mathrm{Lu(OH)_{3}}$ — (A) is false (Section 11.3).
Oxidation states $+3$ is general; $\mathrm{Ce^{4+}}$ ($4f^{0}$) is the best known $+4$ ion — (B) true. The $5f$, $6d$ and $7s$ levels of the actinoids are close in energy, so they show a wider range (U up to $+6$, Np and Pu up to $+7$) — (C) false.
Answer (B).

E4. JEE Main · Numerical Find the mass, in mg, of potassium dichromate ($M=294\ \mathrm{g\,mol^{-1}}$) needed to oxidise completely the iron(II) in $30.0\ \mathrm{mL}$ of $0.100\ \mathrm{M}$ $\mathrm{FeSO_{4}}$ solution in acidic medium. Give the answer to the nearest integer.

Equation $\mathrm{Cr_{2}O_{7}^{2-}(aq)+14H^{+}(aq)+6Fe^{2+}(aq)\rightarrow 2Cr^{3+}(aq)+6Fe^{3+}(aq)+7H_{2}O(l)}$ (Section 11.2): each dichromate takes $6$ electrons, each $\mathrm{Fe^{2+}}$ gives $1$.
Moles $n(\mathrm{Fe^{2+}})=0.0300\times0.100=3.00\times10^{-3}\ \mathrm{mol}$, so $n(\mathrm{Cr_{2}O_{7}^{2-}})=\tfrac{3.00\times10^{-3}}{6}=5.00\times10^{-4}\ \mathrm{mol}$.
Mass $5.00\times10^{-4}\times294=0.147\ \mathrm{g}$.
Answer $147\ \mathrm{mg}$, i.e. $147$.
⏱ Shortcut Equivalents: $n$-factor of $\mathrm{K_{2}Cr_{2}O_{7}}$ is $6$, so mass $=\tfrac{3.00\times10^{-3}\times294}{6}$. Using $3$ (one Cr) gives $294$.

E5. JEE Main · MCQ Which statement about interstitial compounds such as $\mathrm{TiC}$, $\mathrm{Mn_{4}N}$ and $\mathrm{Fe_{3}H}$ is incorrect? (A) They are often non-stoichiometric. (B) Their melting points are higher than those of the pure metals. (C) They keep metallic conductivity. (D) They are chemically very reactive.

What they are Small atoms (H, B, C, N) sit in the holes of the metal lattice without changing its structure much (Section 11.2). The metal–metal bonding survives, so conductivity stays; the extra bonds to the small atoms make them very hard and raise the melting point; formulas such as $\mathrm{VH_{0.56}}$ show they need not be stoichiometric.
Reactivity They are chemically rather inert, not reactive.
Answer (D).

E6. JEE Main · Numerical Find the total number of $4f$ electrons in the ions $\mathrm{Ce^{3+}}$ ($Z=58$), $\mathrm{Sm^{3+}}$ ($Z=62$), $\mathrm{Gd^{3+}}$ ($Z=64$) and $\mathrm{Er^{3+}}$ ($Z=68$) taken together. Give the answer to the nearest integer.

Rule Beyond the [Xe] core a lanthanoid has $Z-54$ electrons; a $3+$ ion loses its $6s$ and $5d$ electrons first and keeps the rest in $4f$: $4f^{\,Z-57}$ (Section 11.3).
Count $\mathrm{Ce^{3+}}$ $4f^{1}$, $\mathrm{Sm^{3+}}$ $4f^{5}$, $\mathrm{Gd^{3+}}$ $4f^{7}$, $\mathrm{Er^{3+}}$ $4f^{11}$.
Answer $1+5+7+11=24$.
⏱ Shortcut Sum of $Z$ is $252$; subtract $4\times57=228$: $24$.

E7. JEE Main · MCQ Which ion has the same spin-only magnetic moment as $\mathrm{Fe^{3+}}$? (A) $\mathrm{Mn^{2+}}$ (B) $\mathrm{Fe^{2+}}$ (C) $\mathrm{Co^{3+}}$ (D) $\mathrm{Cr^{3+}}$

d counts $d$ count $=$ group number $-$ charge (Section 11.1): $\mathrm{Fe^{3+}}$ $8-3=5$; $\mathrm{Mn^{2+}}$ $7-2=5$; $\mathrm{Fe^{2+}}$ $6$; $\mathrm{Co^{3+}}$ $6$; $\mathrm{Cr^{3+}}$ $3$.
Unpaired $d^{5}$: $5$ unpaired, $\mu=\sqrt{35}=5.92\ \mathrm{BM}$; $d^{6}$: $4$ ($4.90$); $d^{3}$: $3$ ($3.87$) (Section 11.2).
Answer (A) $\mathrm{Mn^{2+}}$.
⏱ Shortcut Isoelectronic ions ($\mathrm{Mn^{2+}}$ and $\mathrm{Fe^{3+}}$ both have $23$ electrons) have the same configuration and the same moment.

E8. JEE Main · Numerical In the preparation of $\mathrm{KMnO_{4}}$ from pyrolusite and of $\mathrm{K_{2}Cr_{2}O_{7}}$ from chromite ore, the following manganese and chromium species occur: $\mathrm{MnO_{2}}$, $\mathrm{K_{2}MnO_{4}}$, $\mathrm{KMnO_{4}}$, $\mathrm{FeCr_{2}O_{4}}$, $\mathrm{Na_{2}CrO_{4}}$, $\mathrm{K_{2}Cr_{2}O_{7}}$. Find the sum of the oxidation states of Mn or Cr in these six species. Give the answer to the nearest integer.

Manganese $\mathrm{MnO_{2}}$ $+4$ → (fusion with KOH in air) $\mathrm{K_{2}MnO_{4}}$ $+6$ → $\mathrm{KMnO_{4}}$ $+7$ (Section 11.2).
Chromium Chromite $\mathrm{FeCr_{2}O_{4}}$ is $\mathrm{Fe^{2+}}$ with $2x=8-2$, so Cr $+3$ → (fusion with $\mathrm{Na_{2}CO_{3}}$ in air) $\mathrm{Na_{2}CrO_{4}}$ $+6$ → $\mathrm{K_{2}Cr_{2}O_{7}}$ $+6$ (acidification changes no oxidation state).
Answer $4+6+7+3+6+6=32$.
⏱ Shortcut Only two steps are redox for chromium (ore → chromate); chromate → dichromate is an acid–base equilibrium. Taking Cr in $\mathrm{K_{2}Cr_{2}O_{7}}$ as $+7$ gives $33$.
✅ Before you start
You need electronic configurations with the Aufbau, Pauli and Hund rules, the shapes of the d orbitals and the extra stability of $d^{5}$ and $d^{10}$ (Section 2.4), and the periodic trends of radius and ionisation enthalpy (Section 9.2), with the blocks of Section 9.1. Oxidation numbers and balancing redox equations (Section 7.1) and electrode potentials (Section 7.3) are used for oxidation states, $E^{\circ}$ trends and the dichromate and permanganate reactions; titrations need moles and molarity (Section 1.3, Section 5.1). The enthalpy cycle for $E^{\circ}$ uses Hess's law (Section 4.2), the chromate–dichromate change uses Le Chatelier's principle (Section 6.2), and colour uses $E=\tfrac{hc}{\lambda}$ (Section 2.1).