Reference

Glossary

Every technical word in the course and what it means in plain language, with flashcards for practice.

Every technical term in the course, with a plain-language meaning. On every page these words are marked with a dotted underline: hover or tap one to see its meaning. The “Used in” links point to the sections where each term appears.

Flashcards — term ⇄ meaning
Ch 1 · Some Basic Concepts in Chemistry
TermMeaningUsed in
amount of substanceThe SI quantity $n$ that counts particles in units of moles: $n=N/N_{A}$.1.2 1.3 7.4
atomicityThe number of atoms in one molecule of an element: 1 for He, 2 for $\mathrm{O_{2}}$, 3 for $\mathrm{O_{3}}$, 4 for $\mathrm{P_{4}}$, 8 for $\mathrm{S_{8}}$.1.1
average atomic massThe abundance-weighted mean of the isotopic masses of an element, $\bar{A}=\sum x_{i}A_{i}$; the value listed in the periodic table.1.1
Avogadro constantThe number of entities in one mole, $N_{A}=6.022\,140\,76\times10^{23}\ \mathrm{mol^{-1}}$ (exact by definition since 2019).1.2 3.1
Avogadro's lawEqual volumes of all gases at the same temperature and pressure contain equal numbers of molecules; at fixed $T$ and $p$, $V\propto N$.1.1 1.2 15.3
back titrationA method in which a known excess of a reagent (often an acid) is added to a sample and the unreacted excess is then titrated; the amount used by the sample is the difference.1.3
empirical formulaThe formula giving the simplest whole-number ratio of the atoms of each element in a compound, e.g. $\mathrm{CH_{2}O}$ for glucose.1.2 2.2 12.1 13.2
excess reagentA reactant present in more than the stoichiometric amount, so that some of it is left over when the limiting reagent has been used up.1.3
formula massThe sum of the atomic masses of the atoms in one formula unit of a substance, used for ionic compounds such as $\mathrm{NaCl}$ ($58.5\ \mathrm{u}$).1.1 1.2 3.4 5.3
Gay-Lussac's law of gaseous volumesThe volumes of reacting gases and of gaseous products, measured at the same temperature and pressure, are in a simple whole-number ratio.1.1 1.3
law of conservation of massIn a chemical reaction the total mass of the products equals the total mass of the reactants (all substances, including gases, counted — e.g. in a closed vessel).1.1 1.3
law of definite proportionsA given pure compound always contains the same elements in the same proportion by mass, whatever its source or method of preparation (Proust).1.1 1.2
law of multiple proportionsWhen two elements form more than one compound, the masses of one element combining with a fixed mass of the other are in a ratio of small whole numbers (Dalton).1.1
limiting reagentThe reactant that is used up first when reactants are not in the stoichiometric ratio; it is the one with the smallest $n/\nu$ and it fixes the maximum amount of product.1.3 4.1 6.1 20.3
molar massThe mass of one mole of a substance, $M=m/n$ in $\mathrm{g\,mol^{-1}}$; numerically equal to its relative atomic, molecular or formula mass.1.2 1.3 3.4 5.1
molar volumeThe volume of one mole of a gas, $V_{m}=V/n=RT/p$: $22.4\ \mathrm{L\,mol^{-1}}$ at 273 K and 1 atm, $22.7\ \mathrm{L\,mol^{-1}}$ at 273.15 K and 1 bar (gases only).1.1 1.2 1.3 4.1
molecular formulaThe formula giving the actual number of atoms of each element in one molecule; it is $n$ times the empirical formula, $n=M/(\text{empirical formula mass})$.1.2 5.3 12.2 13.2
percentage compositionThe mass percentage of each element in a compound: $(a\times A_{r})/M\times100$ for an element occurring $a$ times in the formula.1.2 15.2
percentage purityMass of the pure substance in a sample divided by the mass of the sample, times 100 %; impurities are usually assumed not to react.1.3 7.1 20.2
percentage yieldActual yield divided by theoretical yield, times 100 %. For steps carried out one after another the fractional yields multiply.1.3 20.1
stoichiometric coefficientThe number written in front of a formula in a balanced equation (symbol $\nu$); the coefficients give the ratio of the amounts in moles that react and form.1.3 4.2 4.3 6.1
stoichiometryThe calculation of the amounts, masses, gas volumes and solution volumes of reactants and products of a reaction from its balanced equation, using the coefficients as mole ratios.1.1 1.3 5.1 6.1
theoretical yieldThe amount or mass of product calculated from the limiting reagent, assuming complete reaction and no losses.1.3 20.1
unified atomic mass unitThe unit $\mathrm{u}$ of atomic masses: exactly $\tfrac{1}{12}$ of the mass of one carbon-12 atom, $1\ \mathrm{u}=1.66054\times10^{-24}$ g.1.1 1.2
vapour densityThe density of a gas or vapour relative to hydrogen at the same temperature and pressure; molar mass $M=2\times$ vapour density.1.2 6.2 13.2
water of crystallisationWater molecules built into the crystal of a hydrated salt in a fixed ratio, as in $\mathrm{CuSO_{4}\cdot5H_{2}O}$; it counts in the molar mass.1.1 1.2 4.2 12.1
Ch 2 · Atomic Structure
TermMeaningUsed in
absorption spectrumThe spectrum of white light after it has passed through a substance: dark lines at the wavelengths the substance absorbs — for atoms, the same wavelengths they emit.2.1 12.2 12.3
angular nodeA node through the nucleus (a plane or a cone) on which $\psi=0$; an orbital has $l$ angular nodes.2.4
atomic orbitalA one-electron wave function of an atom, labelled by the quantum numbers $n$, $l$, $m_{l}$; the region where the electron is likely to be found.2.3 3.3 3.4
Aufbau principleIn the ground state, electrons fill orbitals in order of increasing energy: the subshell with lower $n+l$ first, and for equal $n+l$ the one with lower $n$.2.4 3.4
azimuthal quantum number$l=0,1,\dots,n-1$: identifies the subshell (s, p, d, f) and the shape of the orbital; the orbital angular momentum is $\sqrt{l(l+1)}\,h/2\pi$.2.4
Bohr radiusThe radius of the first Bohr orbit of hydrogen, $a_{0}=52.9\ \mathrm{pm}$; the orbit $n$ of a species of atomic number $Z$ has radius $52.9\,n^{2}/Z\ \mathrm{pm}$.2.2 2.3
boundary surface diagramA surface of constant $\psi^{2}$ enclosing about 90 % of the probability of finding the electron; its shape is taken as the shape of the orbital.2.4
de Broglie wavelengthThe wavelength of the matter wave of a particle of momentum $p$: $\lambda=h/p=h/mv$; for an electron accelerated through $V$ volts, $\lambda=1.226/\sqrt{V}$ nm.2.3
degenerate orbitalsOrbitals of equal energy, such as the three p orbitals or the five d orbitals of one subshell in a free atom.2.4
electromagnetic spectrumThe whole family of electromagnetic waves arranged by wavelength: gamma rays, X-rays, ultraviolet, visible light (about 400–750 nm), infrared, microwaves and radio waves.2.1
emission spectrumThe spectrum of the radiation given out by an excited substance. Free atoms give a line emission spectrum: bright lines at a few fixed wavelengths.2.1 2.2
exchange energyThe stabilisation gained when parallel-spin electrons in degenerate orbitals exchange positions; $N$ such electrons give $N(N-1)/2$ exchanges, most for half-filled and filled subshells.2.1 2.4 4.1 8.3
excitation energyThe energy needed to raise an electron from the ground state to a particular excited state; for a hydrogen-like species $13.6Z^{2}(1-1/n^{2})\ \mathrm{eV}$.2.2
excited stateAny state of an atom with more energy than the ground state ($n=2,3,\dots$ for hydrogen). Atoms leave excited states within about $10^{-8}\ \mathrm{s}$, emitting photons.2.2 3.3 10.2
ground stateThe lowest-energy state of an atom or ion; for hydrogen the orbit $n=1$, with $E_{1}=-13.6\ \mathrm{eV}$.1.1 2.2 2.4 3.3
Hund's ruleIn degenerate orbitals, electrons occupy separate orbitals with parallel spins before any pairing begins (rule of maximum multiplicity).2.4 3.4 9.1 10.1
hydrogen-like speciesA nucleus with only one electron, such as $\mathrm{H}$, $\mathrm{He^{+}}$, $\mathrm{Li^{2+}}$ or $\mathrm{Be^{3+}}$; Bohr's formulas apply to it with the atomic number $Z$.2.2 2.3 2.4 9.2
magnetic quantum number$m_{l}=-l,\dots,0,\dots,+l$ ($2l+1$ values): fixes the orientation of an orbital in space; each value is one orbital of the subshell.2.4
matter waveThe wave associated with a moving material particle such as an electron; its wavelength is given by the de Broglie relation $\lambda=h/mv$.2.3
Pauli exclusion principleNo two electrons in an atom can have the same four quantum numbers, so an orbital holds at most two electrons, with opposite spins.2.4 3.4
photonA packet (quantum) of electromagnetic radiation. It travels at the speed of light and carries energy $E=h\nu=hc/\lambda$; brighter light of the same colour means more photons, not bigger ones.2.1 2.2 2.3 9.2
Planck's constantThe constant $h=6.626\times10^{-34}\ \mathrm{J\,s}$ that links the energy of a quantum to its frequency, $E=h\nu$.2.1
probability density$\psi^{2}$ at a point: the probability of finding the electron in a small volume $\delta V$ there is $\psi^{2}\,\delta V$.2.3 2.4
radial nodeA spherical surface around the nucleus on which the wave function is zero and changes sign; an orbital has $n-l-1$ of them (an s orbital $n-1$).2.3 2.4
Rydberg constantThe constant in the formula for the hydrogen spectrum, $\bar{\nu}=R_{H}(1/n_{1}^{2}-1/n_{2}^{2})$; $R_{H}=109\,677\ \mathrm{cm^{-1}}=1.097\times10^{7}\ \mathrm{m^{-1}}$.2.1 2.2
spin quantum number$m_{s}=+\tfrac12$ or $-\tfrac12$: the orientation of the electron's intrinsic spin angular momentum.2.4
stationary stateIn Bohr's model, an allowed orbit (energy level) in which the electron has a fixed energy and does not radiate.2.2
stopping potentialThe smallest reverse voltage $V_{0}$ that stops even the fastest photoelectrons; $eV_{0}$ equals their maximum kinetic energy.2.1
threshold frequencyThe lowest frequency $\nu_{0}$ of light that can eject electrons from a given metal. Below it there is no photoelectric emission, however intense the light.2.1
uncertainty principleHeisenberg's principle that the position and the momentum of a particle along the same direction cannot both be known exactly: $\Delta x\,\Delta p_{x}\ge h/4\pi$.2.2 2.3
wave functionAn acceptable solution $\psi$ of the Schrödinger equation for an electron; it can be positive, negative or zero, and its square gives the probability density.2.3 2.4 3.3 3.4
wavenumberThe number of wavelengths in unit length, $\bar{\nu}=1/\lambda$; usually quoted in $\mathrm{cm^{-1}}$. It is proportional to the frequency and to the photon energy.2.1 2.2 12.3
work functionThe minimum energy $W_{0}$ needed to remove an electron from the surface of a particular metal; $W_{0}=h\nu_{0}=hc/\lambda_{0}$.2.1 2.2 9.2
Ch 3 · Chemical Bonding and Molecular Structure
TermMeaningUsed in
antibonding molecular orbitalA molecular orbital (marked *) higher in energy than the atomic orbitals that form it, with a nodal plane between the nuclei; its electrons weaken the bond.3.4
bonding molecular orbitalA molecular orbital lower in energy than the atomic orbitals that form it, with increased electron density between the nuclei; its electrons strengthen the bond.3.4
Born–Haber cycleA Hess's-law cycle linking the enthalpy of formation of an ionic solid to atomisation, ionisation, electron gain and lattice enthalpies; used to calculate the lattice enthalpy (or any one other unknown step).3.1 4.2 9.2 11.1
coordinate bondA covalent bond whose shared pair is supplied entirely by one atom (the donor) to another with a vacant orbital (the acceptor), as in H₃N→BF₃. Once formed it is identical to an ordinary covalent bond.3.2 3.3 6.3 11.2
diamagneticWeakly repelled by a magnetic field because all electrons are paired, e.g. N₂, C₂, O₂²⁻.2.4 3.4 11.1 11.2
dipole momentThe product μ = q × d of the separated charge and the distance between the charges; a vector, measured in debye (1 D = 3.336 × 10⁻³⁰ C m). For a molecule it is the vector sum of its bond and lone-pair moments, so symmetrical molecules such as CO₂ have μ = 0.3.2 10.2 12.2 14.2
electronegativityThe tendency of an atom in a molecule to attract a shared electron pair towards itself; a relative number (Pauling scale: F 4.0, O 3.5, N and Cl 3.0). It rises across a period and falls down a group.3.1 3.2 3.4 6.3
electrovalencyThe number of electrons an atom loses or gains when it forms an ion — the magnitude of the ion's charge (2 for Mg in MgO, 3 for N in Mg₃N₂).3.1
Fajans' rulesRules for the covalent character of an ionic bond: it increases for a small, highly charged cation, a large, highly charged anion, and a cation with an 18-electron (n−1)d¹⁰ shell (AgCl more covalent than NaCl).3.1 3.2 10.1 11.3
formal chargeThe book-keeping charge on an atom in a Lewis structure, FC = V − L − ½B (valence electrons minus lone-pair electrons minus half the bonding electrons). The best structure has the smallest formal charges; they are not real charges.3.2 3.3
hybrid orbitalOne of a set of equivalent orbitals made by hybridisation; hybrid orbitals point as far apart as possible and form σ bonds or hold lone pairs.3.3 12.3 14.1 15.3
hybridisationMixing of atomic orbitals of comparable energy on one atom to give the same number of equivalent hybrid orbitals: sp, sp², sp³, sp³d, sp³d², sp³d³.3.2 3.3 10.1 12.3
hydrogen bondThe attraction between an H atom bonded to F, O or N and a lone pair on another F, O or N atom, X–H···Y; typically 10–40 kJ mol⁻¹.3.4 4.3 5.2 5.3
intramolecular hydrogen bondA hydrogen bond between an X–H group and an acceptor in the same molecule (as in 2-nitrophenol); it lowers the boiling point and the solubility in water.3.4 13.1 14.2 17.2
ionic bondThe non-directional electrostatic attraction between oppositely charged ions formed by complete transfer of electrons from an atom of low ionisation enthalpy to an atom of strongly negative electron gain enthalpy, as in NaCl.3.1 3.2 3.4
lattice enthalpyThe enthalpy change when one mole of a solid ionic compound is completely separated into its gaseous ions; positive, e.g. +788 kJ/mol for NaCl(s) → Na⁺(g) + Cl⁻(g). It grows with the ionic charges and falls with the distance between the ions.3.1 3.3 4.2 9.2
LCAOLinear combination of atomic orbitals: molecular orbitals approximated as the sum ($\psi_{A}+\psi_{B}$, bonding) and difference ($\psi_{A}-\psi_{B}$, antibonding) of atomic orbitals.3.4
Lewis symbolThe symbol of an element with its valence electrons drawn as dots around it; the symbol itself stands for the nucleus and inner electrons (the kernel).3.1
lone pairA pair of valence electrons that belongs to one atom only and is not shared in a bond (two on O in H₂O, one on N in NH₃). Lone pairs take up more room than bond pairs and help fix the shape of a molecule.3.1 3.2 3.3 3.4
metallic bondThe attraction between the positive kernels of a metal lattice and the sea of delocalised valence electrons around them; non-directional, it explains conductivity, lustre and malleability.3.4 7.2 9.2 10.1
molecular orbitalAn orbital that extends over the whole molecule, formed by combining atomic orbitals of the bonded atoms; it holds at most two electrons of opposite spin.3.4 15.4
octet ruleThe tendency of main-group atoms to combine — by transferring or sharing electrons — so that each ends up with eight electrons in its valence shell, like a noble gas. A guide with known exceptions: incomplete octets (BF₃), odd-electron molecules (NO), expanded octets (SF₆) and noble-gas compounds (XeF₂).3.1 3.3
orbital overlapPartial interpenetration of orbitals of two atoms. In-phase (positive) overlap forms a bond, and the greater the overlap the stronger the bond; opposite-phase or symmetry-cancelled overlap does not.3.3
paramagneticAttracted into a magnetic field because the species has one or more unpaired electrons, e.g. O₂ (two unpaired electrons in π*2p).2.4 3.1 3.4 9.1
pi bondA covalent bond formed by sideways overlap of parallel p orbitals, with electron density above and below the internuclear axis. It is weaker than a σ bond and prevents rotation.3.3 3.4 4.2 11.1
polar covalent bondA covalent bond between atoms of different electronegativity, in which the shared pair is drawn towards the more electronegative atom, giving partial charges δ+ and δ− (as in H–Cl).3.2
resonance energyThe amount by which the actual molecule (the resonance hybrid) is lower in energy than its most stable contributing structure; about 150 kJ mol⁻¹ for benzene.3.3 14.3 15.4
resonance hybridWhen one Lewis structure is not enough, the real molecule is a single resonance hybrid of several contributing structures that differ only in the placement of electrons; the hybrid is more stable than any of them.3.3 14.2 14.3 15.4
s characterThe fraction of the s orbital in a hybrid orbital: 50% in sp, 33.3% in sp², 25% in sp³, 20% in sp³d. More s character gives shorter bonds and a more electronegative atom.3.3 14.1 16.1 17.2
sigma bondA covalent bond formed by head-on overlap of orbitals along the internuclear axis; its electron density is symmetric about the axis. Every single bond is a σ bond.3.3 4.2 11.1 12.3
steric numberThe number of atoms σ-bonded to a central atom plus its lone pairs; it equals the number of hybrid orbitals the atom uses, $H=\tfrac12(V+M-c+a)$.3.2 3.3 10.2 14.1
s–p mixingInteraction of the σ2s and σ2p_z molecular orbitals in Li₂ to N₂ (small 2s–2p gap), which raises σ2p_z above the π2p pair and makes B₂ paramagnetic.3.4
valence bond theoryThe theory that a covalent bond forms when a valence orbital of one atom overlaps a valence orbital of another and the two electrons in the overlap region have opposite spins.3.2 3.3 3.4 12.3
VSEPR theoryValence shell electron pair repulsion theory: the electron pairs (bond pairs and lone pairs) around a central atom repel and arrange themselves as far apart as possible, which fixes the shape of the molecule; lone pairs repel most.3.2 3.3 10.1 10.2
Ch 4 · Chemical Thermodynamics
TermMeaningUsed in
adiabatic processA process in which no heat passes between the system and its surroundings ($q=0$), so $\Delta U=w$.4.1
bomb calorimeterA sealed steel vessel in which a sample burns in oxygen at constant volume; the temperature rise of the surrounding water gives $q_{V}=\Delta U$ of combustion.4.1 4.2
bond dissociation enthalpyThe enthalpy needed to break one mole of a given bond in gaseous molecules into gaseous fragments; the mean bond enthalpy averages this over the identical bonds of a molecule or over many compounds.3.1 3.3 3.4 4.2
calorific valueThe heat released per unit mass of a fuel or food on complete combustion, usually in $\mathrm{kJ\,g^{-1}}$.4.1 4.2
crossover temperatureThe temperature $T^{*}=\Delta H/\Delta S$ at which $\Delta G$ changes sign, when $\Delta H$ and $\Delta S$ have the same sign; with standard values it is where $K=1$.4.3
enthalpy of atomisation$\Delta_{a}H$: the enthalpy change when one mole of a substance is broken completely into gaseous atoms (for a metal, equal to its enthalpy of sublimation).4.2 11.1
enthalpy of combustion$\Delta_{c}H^{\circ}$: the enthalpy change when one mole of a substance burns completely in oxygen, with reactants and products in their standard states. Always negative.4.1 4.2 15.3
enthalpy of hydration$\Delta_\text{hyd}H$: the enthalpy change when one mole of gaseous ions is surrounded by water at infinite dilution (always negative), or when an anhydrous salt takes up water to form a stated hydrate.4.2 10.2 11.1 11.3
enthalpy of solution$\Delta_\text{sol}H$: the enthalpy change when one mole of a substance dissolves in a large amount of solvent; for an ionic solid, $\Delta_\text{lattice}H+\Delta_\text{hyd}H$.4.2 20.3
enthalpy of sublimation$\Delta_\text{sub}H$: the enthalpy needed to turn one mole of a solid directly into vapour; at a given temperature it equals $\Delta_\text{fus}H+\Delta_\text{vap}H$.3.1 4.2
entropyA state function $S$ measuring how widely energy and matter are spread out; its change is $\Delta S=q_\text{rev}/T$ along a reversible path. Unit $\mathrm{J\,K^{-1}}$ (molar: $\mathrm{J\,K^{-1}\,mol^{-1}}$).4.1 4.3 7.4 11.1
extensive propertyA property that depends on the amount of matter in the system — mass, volume, internal energy, enthalpy, heat capacity. It doubles when the system is doubled.4.1
first law of thermodynamicsEnergy is conserved: for a closed system $\Delta U=q+w$, where $q$ is the heat supplied to and $w$ the work done on the system (IUPAC convention).4.1
Gibbs energyThe state function $G=H-TS$. At constant temperature and pressure a change is spontaneous when $\Delta G=\Delta H-T\Delta S\lt0$ and at equilibrium when $\Delta G=0$.4.1 4.3 6.1 6.2
Hess's lawThe enthalpy change of a reaction is the same whether it occurs in one step or several; the enthalpies of the steps add up. It follows from enthalpy being a state function.3.1 4.2 4.3 15.4
intensive propertyA property independent of the amount of matter — temperature, pressure, density, and every molar or specific quantity.4.1 4.2 7.3
internal energyThe total energy of the particles of a system (kinetic, intermolecular, bond and electronic energy), symbol $U$. Only its change $\Delta U$ can be measured.4.1 8.3
path functionA quantity whose value depends on the route taken between two states, such as heat $q$ and work $w$. It describes energy in transit, not a property of the system.4.1 4.2
reversible processAn idealised process that passes through a continuous series of equilibrium states, with only an infinitesimal driving force at every stage; it gives the maximum work in expansion.4.1 4.3
second law of thermodynamicsIn any spontaneous process the total entropy of system plus surroundings increases, $\Delta S_\text{total}\gt0$; at equilibrium $\Delta S_\text{total}=0$.4.3 7.4
spontaneous processA change that, under the given conditions, tends to happen by itself without continuous work from outside. It says nothing about speed: diamond turning into graphite is spontaneous but extremely slow.4.3 7.3 19.1
standard enthalpy of formation$\Delta_{f}H^{\circ}$: the enthalpy change when one mole of a compound is formed from its elements in their reference states at $1\ \mathrm{bar}$. It is zero for an element in its reference state.3.1 4.2
state functionA property fixed by the present state of a system alone, whatever its history — for example $p$, $V$, $T$, $U$ and $H$. Its change between two states is the same for every path.3.1 4.1 4.2 4.3
thermochemical equationA balanced equation that shows the physical state of every species and the enthalpy change for the molar amounts written, at a stated temperature.4.2
Trouton's ruleThe observation that many non-associated liquids have an entropy of vaporisation of about $85$–$88\ \mathrm{J\,K^{-1}\,mol^{-1}}$ at their normal boiling point; hydrogen-bonded liquids such as water have larger values.4.3
Ch 5 · Solutions
TermMeaningUsed in
azeotropeA liquid mixture that boils at constant temperature with a vapour of the same composition, so it cannot be separated by fractional distillation; minimum- or maximum-boiling.5.2 13.1
binary solutionA solution made of exactly two components, a solvent (labelled 1) and a solute (labelled 2).5.1
colligative propertyA property of a dilute solution that depends only on the number of solute particles per amount of solvent, not on their nature: relative lowering of vapour pressure, boiling-point elevation, freezing-point depression and osmotic pressure.5.1 5.2 5.3
cryoscopic constantThe molal depression constant $K_f$ of a solvent, in $\mathrm{K\,kg\,mol^{-1}}$: $\Delta T_f=K_fm$ for a dilute non-electrolyte solution; $1.86$ for water.5.3
ebullioscopic constantThe molal elevation constant $K_b$ of a solvent, in $\mathrm{K\,kg\,mol^{-1}}$: $\Delta T_b=K_bm$ for a dilute non-electrolyte solution; $0.52$ for water.5.3
hypertonic solutionA solution of higher osmotic pressure than a reference solution; solvent flows into it by osmosis, and cells placed in it shrink.5.3
hypotonic solutionA solution of lower osmotic pressure than a reference solution; solvent flows out of it by osmosis, and cells placed in it swell.5.3
ideal solutionA solution that obeys Raoult's law at every composition; unlike and like molecular attractions are equal, so $\Delta_{mix}H=0$ and $\Delta_{mix}V=0$.5.2 13.1
isotonic solutionsSolutions with the same osmotic pressure at the same temperature (equal concentrations of solute particles); no net osmosis occurs between them.5.3
mass percentageMass of a component divided by the total mass of the solution (or mixture), multiplied by 100; independent of temperature.1.2 1.3 5.1 5.2
molalityAmount of solute per kilogram of solvent, in mol kg⁻¹; contains no volume, so it does not change with temperature.5.1 5.3
molarityAmount of solute per litre of solution, in mol L⁻¹ (M); it falls slightly as the solution expands on heating.1.3 5.1 5.3 6.4
mole fractionAmount (mol) of one component divided by the total amount of all components; $x_{1}+x_{2}+\dots=1$; no unit, independent of temperature.5.1 5.2 5.3 6.1
negative deviationVapour pressure lower than Raoult's law predicts, because A–B attractions are stronger than A–A and B–B; $\Delta_{mix}H\lt0$, $\Delta_{mix}V\lt0$.5.2
non-ideal solutionA solution that does not obey Raoult's law over the whole composition range; it shows a positive or a negative deviation.5.2
normal boiling pointThe temperature at which a liquid's vapour pressure equals 1 atm (101.3 kPa); 100 °C for water.4.3 5.2 6.1 13.1
osmotic pressureThe excess pressure that must be applied to a solution to just stop osmosis of pure solvent into it through a semipermeable membrane; $\pi=iCRT$ for a dilute solution.5.3
parts per millionMass of solute per million (10⁶) units of mass of solution — the mass percentage × 10⁴; for gases usually by volume. 1 ppm in water ≈ 1 mg per kg.5.1 15.3
positive deviationVapour pressure higher than Raoult's law predicts, because A–B attractions are weaker than A–A and B–B; $\Delta_{mix}H\gt0$, $\Delta_{mix}V\gt0$.5.2
Raoult's lawFor a solution, the partial vapour pressure of each component equals its mole fraction in the liquid times the vapour pressure of the pure component: $p_{i}=x_{i}p_{i}^{\circ}$.5.1 5.2 5.3 13.1
reverse osmosisFlow of solvent out of a solution through a semipermeable membrane, forced by applying a pressure greater than the osmotic pressure; used to desalinate seawater.5.3
semipermeable membraneA film that lets solvent molecules pass but not solute particles, e.g. a cell membrane, cellophane or cellulose acetate.5.3
soluteA component of a solution present in the smaller amount (or in a different physical state from the solution); it is dissolved in the solvent.1.3 3.4 4.2 4.3
van't Hoff factor$i$ = observed colligative property ÷ value calculated for no dissociation or association = normal molar mass ÷ observed molar mass; $i=1+(n-1)\alpha$ for dissociation, $i=1-(1-1/n)\alpha$ for association.5.3 12.1
vapour pressureThe pressure of a vapour in dynamic equilibrium with its liquid (or solid) at a given temperature; it depends only on the substance and the temperature.5.1 5.2 5.3 6.1
Ch 6 · Equilibrium
TermMeaningUsed in
acid–base indicatorA weak organic acid or base whose two conjugate forms have different colours. It changes colour over about $\mathrm{p}K_{\mathrm{In}}\pm1$ pH units, e.g. phenolphthalein 8.3–10.0.6.4 18.2
active massThe effective concentration of a substance in a reaction: its molar concentration for a gas or solute, and a constant (taken as 1) for a pure solid or pure liquid.6.1
amphiproticAble both to donate and to accept a proton, for example $\mathrm{H_{2}O}$, $\mathrm{HCO_{3}^{-}}$, $\mathrm{HS^{-}}$ and $\mathrm{H_{2}PO_{4}^{-}}$.6.3
Brønsted–Lowry acidAn acid in the Brønsted–Lowry sense is a proton donor; a Brønsted–Lowry base is a proton acceptor. Every acid–base reaction is a proton transfer.6.3
buffer capacityThe amount of strong acid or base a buffer can absorb for a given small change of pH. It is larger for more concentrated buffers and greatest when $[\text{salt}]=[\text{acid}]$.6.4
buffer solutionA solution, usually of a weak acid and its conjugate base (or a weak base and its conjugate acid) in comparable amounts, whose pH changes very little when small amounts of acid or base are added or when it is diluted.6.4
common-ion effectThe suppression of the ionisation of a weak electrolyte, or of the dissolution of a sparingly soluble salt, by adding a strong electrolyte that supplies one of the same ions. The equilibrium constant is unchanged; the position shifts.6.4 20.2
conjugate acid–base pairTwo species that differ by exactly one proton, such as $\mathrm{NH_{4}^{+}/NH_{3}}$ or $\mathrm{CH_{3}COOH/CH_{3}COO^{-}}$. For such a pair $K_{a}K_{b}=K_{w}$.6.3 6.4
degree of dissociationThe fraction $\alpha$ of the amount of a substance originally taken that has dissociated when equilibrium is reached.5.3 6.2 7.2
degree of ionisationThe fraction $\alpha$ of a dissolved electrolyte present as ions at equilibrium. For a weak electrolyte it grows on dilution, $\alpha\approx\sqrt{K_{a}/c}$.6.3 6.4
dynamic equilibriumA state of a closed system at constant temperature in which two opposing processes continue at equal rates, so that all observable properties (pressure, concentrations, colour) stay constant.5.2 6.1 6.3 6.4
end pointThe point in a titration at which the indicator changes colour. A suitable indicator makes it coincide with the equivalence point, where exactly equivalent amounts have reacted.5.1 6.4 7.1 11.2
equilibrium constantThe constant value $K$ of the equilibrium ratio of a reaction at a given temperature; it depends only on the reaction as written and the temperature. A large $K$ means a product-rich equilibrium mixture.4.3 6.1 6.2 6.3
Henderson–Hasselbalch equationThe buffer equation $\mathrm{pH}=\mathrm{p}K_{a}+\log\dfrac{[\text{salt}]}{[\text{acid}]}$ (or $\mathrm{pOH}=\mathrm{p}K_{b}+\log\dfrac{[\text{salt}]}{[\text{base}]}$), valid when both components are present in much larger amounts than $\mathrm{H^{+}}$ and $\mathrm{OH^{-}}$.6.4 17.2
Henry's lawAt constant temperature the solubility of a gas in a liquid is proportional to its partial pressure above the liquid: $p=K_{\mathrm{H}}x$. A larger Henry's law constant $K_{\mathrm{H}}$ means a less soluble gas.6.1
heterogeneous equilibriumAn equilibrium involving more than one phase, such as $\mathrm{CaCO_{3}(s)\rightleftharpoons CaO(s)+CO_{2}(g)}$; pure solids and liquids are left out of its equilibrium constant.6.1 6.4
homogeneous equilibriumAn equilibrium in which all reactants and products are in the same phase, for example all gases or all in one solution.
ICE tableA three-row table (Initial, Change, Equilibrium) that links all equilibrium amounts to one unknown through the stoichiometry, used to solve equilibrium problems.6.2 6.3
ionic product of waterThe constant $K_{w}=[\mathrm{H^{+}}][\mathrm{OH^{-}}]$, equal to $1.0\times10^{-14}$ at 298 K and increasing with temperature. It holds in pure water and in every aqueous solution.6.3
law of chemical equilibriumAt a given temperature the ratio of equilibrium concentrations, products over reactants, each raised to the power of its coefficient in the balanced equation, is a constant $K_{c}$.6.1 6.2 6.3
law of mass actionGuldberg and Waage's rule that the rate of a reaction is proportional to the product of the active masses of the reactants, each raised to the power of its coefficient; strictly true for elementary reactions.6.1 8.1
Le Chatelier's principleIf a system at equilibrium is disturbed by a change of concentration, pressure or temperature, the equilibrium shifts in the direction that partly counteracts the change.6.1 6.2 6.3 6.4
Lewis acidAn electron-pair acceptor, such as $\mathrm{BF_{3}}$, $\mathrm{AlCl_{3}}$, metal cations or $\mathrm{H^{+}}$. It forms a coordinate bond with a Lewis base (an electron-pair donor).6.3 9.2 10.1 12.1
Ostwald's dilution lawFor a weak binary electrolyte, $K=\dfrac{c\alpha^{2}}{1-\alpha}$, so that $\alpha\approx\sqrt{K/c}$ when $\alpha\ll1$: the more dilute the solution, the greater the degree of ionisation.6.3 7.2
polyprotic acidAn acid with more than one ionisable hydrogen, such as $\mathrm{H_{2}S}$, $\mathrm{H_{2}CO_{3}}$ or $\mathrm{H_{3}PO_{4}}$. It ionises in steps with $K_{a1}\gt K_{a2}\gt K_{a3}$.6.3 20.3
reaction quotientThe expression of the equilibrium constant evaluated with the concentrations (or partial pressures) present at any instant, $Q$. If $Q\lt K$ the reaction goes forward; if $Q\gt K$ it goes backward; at equilibrium $Q=K$.4.3 6.2 7.3
salt hydrolysisThe reaction of the cation or anion of a salt with water that produces $\mathrm{H_{3}O^{+}}$ or $\mathrm{OH^{-}}$, making the solution acidic or basic. Its constant is $K_{h}=K_{w}/K_{a}$, $K_{w}/K_{b}$ or $K_{w}/(K_{a}K_{b})$.6.4
solubility productThe equilibrium constant $K_{sp}$ for a sparingly soluble salt in contact with its saturated solution, e.g. $K_{sp}=[\mathrm{Ag^{+}}][\mathrm{Cl^{-}}]$. A precipitate forms when the ionic product exceeds $K_{sp}$.6.4 7.2 7.3 20.2
van 't Hoff equationThe relation $\ln(K_{2}/K_{1})=\dfrac{\Delta H^{\circ}}{R}\left(\dfrac{1}{T_{1}}-\dfrac{1}{T_{2}}\right)$ giving how an equilibrium constant changes with temperature.6.2
weak electrolyteA substance that is only partly ionised in solution, so that its molecules and ions coexist in a dynamic equilibrium — for example acetic acid or ammonia. Its degree of ionisation is well below 1.4.2 6.3 6.4 7.2
Ch 7 · Redox Reactions and Electrochemistry
TermMeaningUsed in
calomel electrodeA reference electrode of mercury in contact with mercury(I) chloride (calomel) and a KCl solution: $\mathrm{Hg_{2}Cl_{2}(s)+2e^{-}\rightarrow 2Hg(l)+2Cl^{-}(aq)}$. Its steady potential makes it a standard partner electrode in pH measurements.7.3
cell constantThe ratio $G^{*}=l/A$ of electrode separation to electrode area of a conductivity cell (unit $\mathrm{cm^{-1}}$), found by calibration with standard KCl; $\kappa=G^{*}/R$.7.2
comproportionationA redox reaction in which the same element in two different oxidation states ends up in one intermediate state, e.g. $\mathrm{2H_{2}S+SO_{2}\rightarrow 3S+2H_{2}O}$.7.1 11.2
concentration cellA cell made of two electrodes of the same kind that differ only in the concentration of the electrolyte (or the pressure of a gas). Its standard emf is zero, and its emf is $\dfrac{0.059}{n}\log\dfrac{c_{2}}{c_{1}}$ for metal-ion cells.7.3
conductivityThe reciprocal of resistivity, $\kappa=1/\rho=G^{*}/R$: the conductance of a 1 cm cube of the material between opposite faces. Unit $\mathrm{S\,m^{-1}}$ or $\mathrm{S\,cm^{-1}}$. It decreases when a solution is diluted.3.4 7.2 11.2 12.1
current efficiencyIn electrolysis, the actual amount of product divided by the amount expected from the charge passed ($It/zF$), expressed as a percentage.7.4
Debye–Hückel–Onsager equationFor a strong electrolyte in dilute solution, $\Lambda_m=\Lambda_m^{\circ}-A\sqrt c$; the fall below $\Lambda_m^{\circ}$ is due to interionic attraction (relaxation and electrophoretic effects).7.2
disproportionationA redox reaction in which one element in one oxidation state is simultaneously oxidised and reduced, e.g. $\mathrm{2H_{2}O_{2}\rightarrow 2H_{2}O+O_{2}}$. The reverse is comproportionation.7.1 7.4 11.1 11.2
dry cellThe common primary cell (about 1.5 V) with a zinc can as anode, a graphite rod in MnO₂ and carbon as cathode, and a moist paste of NH₄Cl and ZnCl₂ as electrolyte.7.4
electrochemical seriesThe list of reduction half-reactions arranged in order of their standard electrode potentials. Couples high in the list contain strong oxidising agents, couples low in the list strong reducing agents; it predicts displacement reactions and cell emfs.7.3
electrolytic cellA cell in which an external source of electricity drives a non-spontaneous redox reaction (electrolysis). Oxidation occurs at the anode, which is positive; reduction at the cathode, which is negative.7.3 7.4
electrolytic conductionConduction of electricity by the movement of ions through a solution or melt; it transports matter and is accompanied by chemical change at the electrodes. Its conductance rises with temperature.7.2
Faraday constantThe charge on one mole of electrons, $F=N_{A}e=96\,487\ \mathrm{C\,mol^{-1}}$ (about 96 500). It converts moles of electrons into coulombs: $Q=n(\mathrm{e^{-}})F$.7.4
fuel cellA galvanic cell fed continuously with a fuel (such as hydrogen or methane) and oxygen, which turns the Gibbs energy of the combustion reaction directly into electricity. The H₂–O₂ cell gives about 1.23 V.4.3 7.4
galvanic cellAn electrochemical cell that turns the Gibbs energy of a spontaneous redox reaction into electrical work: oxidation at the anode (negative terminal), reduction at the cathode (positive terminal), electrons flowing through the external wire. The Daniell cell is an example.7.1 7.3 7.4
half-reactionThe oxidation part or the reduction part of a redox reaction written separately with the electrons shown, e.g. $\mathrm{Zn\rightarrow Zn^{2+}+2e^{-}}$.7.1 7.3 7.4 11.2
Kohlrausch's lawAt infinite dilution each ion contributes independently: $\Lambda_m^{\circ}=\nu_{+}\lambda_{+}^{\circ}+\nu_{-}\lambda_{-}^{\circ}$. Used to find $\Lambda_m^{\circ}$ of weak electrolytes, $\alpha$, $K_a$ and solubilities of sparingly soluble salts.7.2
law of equivalenceIn a complete reaction every reactant reacts in the same number of equivalents; for a titration $n_{1}M_{1}V_{1}=n_{2}M_{2}V_{2}$.7.1
lead accumulatorThe rechargeable lead–acid cell (about 2 V): Pb anode, PbO₂ cathode, sulphuric acid electrolyte; on discharge $\mathrm{Pb+PbO_{2}+2H_{2}SO_{4}\rightarrow 2PbSO_{4}+2H_{2}O}$. Six in series make a 12 V car battery.7.4
limiting molar conductivity$\Lambda_m^{\circ}$, the value of the molar conductivity at infinite dilution ($c\to0$), where ions no longer interact; found by extrapolation for strong electrolytes and by Kohlrausch's law for weak ones.7.2
molar conductivity$\Lambda_m=\kappa/c$, i.e. $1000\kappa/c$ in $\mathrm{S\,cm^{2}\,mol^{-1}}$ with $\kappa$ in $\mathrm{S\,cm^{-1}}$ and $c$ in $\mathrm{mol\,L^{-1}}$: the conductance per mole of electrolyte. It increases on dilution.7.2 12.1 12.2
n-factorMoles of electrons lost or gained per mole of a substance in a given redox reaction (e.g. 5 for $\mathrm{KMnO_{4}}$ in acid, 3 for $\mathrm{FeC_{2}O_{4}}$). Equivalents = n-factor × moles; equivalent mass = molar mass / n-factor.7.1
Nernst equationThe relation $E=E^{\circ}-\dfrac{RT}{nF}\ln Q$ giving the potential of an electrode or cell at any concentrations; at 298 K, $E=E^{\circ}-\dfrac{0.059}{n}\log Q$.7.3 7.4
overpotentialThe extra voltage, beyond the Nernst value, needed to make an electrode reaction go at a useful rate. It is large for the evolution of oxygen, which is why chlorine rather than oxygen forms from concentrated brine.7.4
oxidation numberThe charge an atom would carry if every bond it forms were fully ionic, with shared pairs given to the more electronegative atom (split equally between like atoms). Found with the rules F = −1, O usually −2, H usually +1, sum = charge of the species.3.2 7.1 9.2 11.1
oxidising agentA species that accepts electrons, oxidising something else and being reduced itself — e.g. $\mathrm{KMnO_{4}}$, $\mathrm{K_{2}Cr_{2}O_{7}}$, $\mathrm{Cl_{2}}$.7.1 7.3 9.2 10.1
primary batteryA battery whose reaction cannot be reversed in practice; it is used once and discarded. Example: the dry (Leclanché) cell.7.4
redox reactionA reaction in which electrons are transferred: one species is oxidised (loses electrons, its oxidation number rises) while another is reduced (gains electrons, its oxidation number falls).7.1 7.3 7.4 11.2
reducing agentA species that donates electrons, reducing something else and being oxidised itself — e.g. Zn, $\mathrm{Fe^{2+}}$, $\mathrm{I^{-}}$, $\mathrm{H_{2}S}$.5.1 7.1 7.3 9.2
resistivityThe constant $\rho$ in $R=\rho\,l/A$: the resistance of a unit cube of the material between opposite faces. Unit $\Omega\,\mathrm{m}$ or $\Omega\,\mathrm{cm}$.7.2
salt bridgeA tube of concentrated inert electrolyte (KCl, KNO₃ or NH₄NO₃ in agar) joining the two half-cells of a galvanic cell. Its ions migrate to complete the circuit and keep both solutions electrically neutral.7.1 7.3 7.4
secondary batteryA rechargeable battery: an external current reverses the cell reaction and restores the reactants. Examples: the lead accumulator and the lithium-ion cell.7.4
standard electrode potentialThe emf $E^{\circ}$ of a cell with the standard hydrogen electrode on the left and the given electrode, all species in their standard states, on the right. It refers to the reduction half-reaction: the more positive, the stronger the oxidised form as an oxidising agent.7.1 7.3 9.2 10.1
standard hydrogen electrodeThe reference electrode Pt | H₂(g, 1 bar) | H⁺(aq, 1 M), whose potential is defined as exactly zero at every temperature. All standard electrode potentials are measured against it.7.3
Ch 8 · Chemical Kinetics
TermMeaningUsed in
activated complexThe short-lived, highest-energy arrangement of atoms (transition state) at the top of the energy barrier between reactants and products.8.3
activation energy$E_{a}$: the minimum extra energy, above the average energy of the reactants, that colliding molecules need to reach the activated complex and react.6.2 8.3 11.2 15.1
Arrhenius equation$k=Ae^{-E_{a}/RT}$: the dependence of a rate constant on absolute temperature through the activation energy and the pre-exponential factor.8.1 8.3 19.2
average rateThe change in concentration of a reactant (with a minus sign) or of a product, divided by the time interval over which it happens: $-\Delta[\mathrm{R}]/\Delta t$. It is minus the slope of a secant of the concentration–time curve.8.1 8.3
collision frequency$Z_{AB}$: the number of collisions between reactant molecules per unit volume per unit time; it rises only as $\sqrt{T}$.8.1 8.3
effective collisionA collision that produces products: the molecules have at least the threshold energy and meet with a suitable orientation.8.3
elementary reactionA reaction that takes place in a single molecular event exactly as written; its rate law follows from its equation, and its order equals its molecularity.6.1 8.1 8.3
first-order reactionA reaction whose rate is proportional to the concentration of one reactant ($r=k[\mathrm{A}]$); $\ln[\mathrm{A}]$ falls linearly with time and the half-life $0.693/k$ does not depend on the initial concentration.8.1 8.2 8.3 19.1
half-lifeThe time in which the concentration of a reactant falls to half its initial value; it varies as $[\mathrm{A}]_{0}^{1-n}$ for a reaction of order $n$ and is constant only for first order.8.2 8.3 19.1 19.3
instantaneous rateThe rate at one moment, $-d[\mathrm{R}]/dt$: the limit of the average rate as the time interval shrinks to zero, equal to minus the slope of the tangent to the $[\mathrm{R}]$–$t$ curve.8.1
integrated rate lawThe rate law after integration, giving the concentration of a reactant as a function of time: $[\mathrm{A}]=[\mathrm{A}]_{0}-kt$ for zero order and $[\mathrm{A}]=[\mathrm{A}]_{0}e^{-kt}$ for first order.8.2
inversion of cane sugarThe acid-catalysed hydrolysis of sucrose into glucose and fructose; the optical rotation changes from positive to negative, and the reaction is pseudo-first order in sucrose.8.2 19.1
Maxwell–Boltzmann distributionThe spread of molecular kinetic energies (or speeds) in a gas at a given temperature; its high-energy tail grows sharply as the temperature rises.8.3
molecularityThe number of reacting particles (1, 2 or 3) that collide simultaneously in one elementary step: unimolecular, bimolecular or termolecular. It is not defined for a complex reaction.8.1
order of a reactionThe sum of the exponents of the concentrations in the experimental rate law; the exponent of one concentration is the order with respect to that substance. It may be zero, fractional or negative.8.1 8.2 17.4 20.3
pre-exponential factorThe constant $A$ in the Arrhenius equation (also called the frequency factor); it has the same units as $k$ and measures how often suitably oriented collisions occur.8.3 19.2
pseudo-first-order reactionA reaction of higher order that behaves as first order because the other reactants are in large excess (or constant, like a catalyst), e.g. acid hydrolysis of a dilute ester in water; $k_{\text{obs}}=k'[\mathrm{H_{2}O}]$.8.2 19.1
rate constantThe constant $k$ in a rate law: the rate when all concentrations in the law are $1\ \mathrm{mol\,L^{-1}}$. It depends on temperature and catalyst but not on concentration; units $(\mathrm{mol\,L^{-1}})^{1-n}\,\mathrm{s^{-1}}$.6.1 8.1 8.2 8.3
rate lawThe experimentally found expression $r=k[\mathrm{A}]^{x}[\mathrm{B}]^{y}$ giving the rate of a reaction in terms of concentrations; the exponents need not equal the coefficients of the balanced equation.6.1 8.1 8.2 8.3
rate-determining stepThe slowest step in the mechanism of a complex reaction; it acts as a bottleneck, so the overall rate law is the rate law of this step (with any intermediates eliminated).8.1 15.2 15.4 17.1
reaction intermediateA species formed in one step of a mechanism and used up in a later step, so that it does not appear in the overall equation or in the final rate law.8.1
steric factor$P$ (probability factor): the fraction of sufficiently energetic collisions in which the molecules are correctly oriented to react.8.3
temperature coefficientThe ratio of the rate constants of a reaction at two temperatures 10 K apart, $k_{T+10}/k_{T}$; usually about 2–3 near room temperature.8.3
threshold energyThe minimum total energy colliding reactant molecules must have for an effective collision; equal to the activation energy plus the energy of the reactants.8.3
zero-order reactionA reaction whose rate does not depend on the concentration of the reactant ($r=k$), such as a gas decomposing on a fully covered metal surface; $[\mathrm{A}]$ falls linearly with time and $t_{1/2}=[\mathrm{A}]_{0}/2k$.8.2
Ch 9 · Classification of Elements and Periodicity in Properties
TermMeaningUsed in
amphoteric oxideAn oxide that reacts with both acids and bases to form salts, e.g. $\mathrm{Al_{2}O_{3}}$, $\mathrm{ZnO}$, $\mathrm{BeO}$, $\mathrm{SnO_{2}}$.9.1 9.2 10.1 10.2
block (s, p, d, f)The region of the periodic table in which the differentiating electron enters the same type of subshell: s (groups 1–2), p (groups 13–18), d (groups 3–12) or f (lanthanoids and actinoids).3.1 7.1 9.1 10.1
covalent radiusHalf the distance between the nuclei of two identical atoms joined by a single covalent bond (Cl: 198/2 = 99 pm).9.2 10.1 10.2
diagonal relationshipThe similarity between an element of period 2 and the element one group to the right in period 3 (Li–Mg, Be–Al, B–Si), due to similar charge-to-size ratio and electronegativity.9.2 10.1 11.3
differentiating electronThe electron by which an element's configuration differs from that of the element before it; the subshell it enters decides the element's block.9.1
effective nuclear chargeThe net positive charge felt by an electron, $Z_\text{eff}=Z-\sigma$: the nuclear charge reduced by the shielding of the other electrons.2.4 3.2 9.2 10.1
electron gain enthalpyThe enthalpy change $\Delta_{eg}H$ when one mole of gaseous atoms each gain an electron, $\mathrm{X(g)+e^{-}\rightarrow X^{-}(g)}$; negative when energy is released. Most negative for chlorine.3.1 3.2 9.2 10.2
inner transition elementsThe f-block elements: lanthanoids (Ce–Lu, filling 4f) and actinoids (Th–Lr, filling 5f), printed in two rows below the main table.9.1 9.2 11.1 11.3
ionisation enthalpyThe enthalpy change $\Delta_{i}H$ for removing the most loosely held electron from one mole of isolated gaseous atoms (or ions): $\mathrm{M(g)\rightarrow M^{+}(g)+e^{-}}$; always positive.3.1 4.2 9.1 9.2
isoelectronic speciesAtoms or ions with the same number of electrons, e.g. N³⁻, O²⁻, F⁻, Ne, Na⁺, Mg²⁺, Al³⁺; their radius decreases as the nuclear charge increases.2.4 3.1 3.3 3.4
IUPAC systematic name of an elementA temporary name for an element with $Z\gt100$, built from numerical roots of its digits (nil, un, bi, tri, quad, pent, hex, sept, oct, enn) plus -ium; e.g. 114 is Ununquadium, Uuq.9.1
long form of the periodic tableThe present periodic table: elements in order of atomic number in 7 periods (rows) and 18 groups (columns), with the lanthanoid and actinoid rows printed below.9.1 11.3
metallic radiusHalf the distance between the nuclei of two neighbouring atoms in a metallic crystal (Cu: 256/2 = 128 pm).9.2 11.1 11.2 11.3
metalloidAn element with properties between those of metals and non-metals (often a semiconductor with amphoteric or weakly acidic oxides): B, Si, Ge, As, Sb, Te.9.1 9.2 10.1 10.2
modern periodic lawThe physical and chemical properties of the elements are periodic functions of their atomic numbers: arranged by increasing $Z$, elements with similar properties recur at regular intervals.9.1
representative elementsThe s-block and p-block elements (groups 1, 2 and 13–18), whose valence electrons are all in the outermost shell.3.1 9.2
shielding effectThe reduction of the nuclear attraction on an electron by the other electrons, mainly those in inner shells; shielding power falls in the order s > p > d > f.
van der Waals radiusHalf the distance between the nuclei of two identical non-bonded atoms of neighbouring molecules at closest approach; larger than the covalent radius.9.2 10.2
Ch 10 · p-Block Elements
TermMeaningUsed in
allotropyThe existence of an element in two or more forms with different arrangements of its atoms in the same physical state (diamond, graphite and fullerenes for carbon; white, red and black phosphorus).4.2 9.1 10.1
back bondingSideways donation of a lone pair from a filled p orbital of an attached atom into a vacant orbital of the central atom (as F 2p → B 2p in BF₃), giving partial multiple-bond character and lowering the Lewis acidity.10.1 12.3
catenationThe bonding of atoms of the same element to one another to form chains and rings; strongest for carbon because the C–C bond is strong.10.1 10.2 14.1
chalcogensThe group 16 elements O, S, Se, Te, Po (valence configuration ns²np⁴).9.1 10.2
electron-deficient compoundA compound whose central atom has fewer than eight valence electrons (e.g. BF₃, AlCl₃) or which has too few electrons for ordinary two-electron bonds (e.g. B₂H₆); such compounds act as Lewis acids.3.3 6.3 10.1 14.3
group oxidation stateThe highest oxidation state of a p-block element, reached when all its valence electrons are used: group number − 10 (+3 for group 13, +4 for group 14, +5 for group 15).10.1 10.2 11.1
hydrogen halideA compound HX of hydrogen with a halogen (HF, HCl, HBr, HI); acid strength rises and bond enthalpy falls from HF to HI.10.2 15.2 15.3 16.1
inert-pair effectThe increasing reluctance, down groups 13–16, of the ns² electron pair to take part in bonding, so that the state two below the group oxidation state becomes the more stable one (Tl⁺, Pb²⁺, Bi³⁺).10.1 10.2 11.3
interhalogen compoundA compound of two different halogens, XX′ₙ with n = 1, 3, 5 or 7, in which the larger, less electronegative halogen is central (ClF, ClF₃, BrF₅, IF₇).10.2
maximum covalencyThe greatest number of covalent bonds an atom can form. It is 4 for period-2 elements (only 2s and 2p orbitals) and can reach 6 for heavier p-block elements, which can use d orbitals.9.2 10.1 10.2
noble gasesThe group 18 elements He, Ne, Ar, Kr, Xe, Rn, with completely filled valence shells (ns²np⁶; He 1s²); monatomic, with very high ionisation enthalpies and positive electron gain enthalpies.1.1 3.1 3.3 9.1
oxidising powerThe tendency of a substance to remove electrons from others; for the halogens it is measured by E°(X₂/X⁻) and decreases F₂ > Cl₂ > Br₂ > I₂.7.1 9.2 10.2 11.1
oxoacidAn acid containing oxygen in which the acidic hydrogen is bonded to oxygen, such as HOCl, HClO₄ or H₃PO₄.3.2 6.3 10.2
three-centre two-electron bondA bond in which one electron pair holds three atoms together, such as each B–H–B bridge in diborane.
xenon fluoridesThe compounds XeF₂ (linear), XeF₄ (square planar) and XeF₆ (distorted octahedral), in which xenon is +2, +4 and +6; they exist because xenon's ionisation enthalpy is low enough for fluorine to draw electron density from it.
Ch 11 · d- and f-Block Elements
TermMeaningUsed in
actinoidOne of the f-block elements from thorium ($Z=90$) to lawrencium ($Z=103$), in which the $5f$ subshell is filled; actinium ($Z=89$) is studied with them. All are radioactive.9.1 11.1 11.3
actinoid contractionThe decrease in atomic and ionic radii along the actinoid series; larger from element to element than the lanthanoid contraction because $5f$ electrons shield even more poorly than $4f$.11.3
alloyA blend of a metal with other metals (or carbon), usually a solid solution; forms readily between metals whose radii differ by less than about 15 %, e.g. brass, bronze, stainless steel.1.1 1.3 2.1 5.1
Bohr magnetonThe natural unit of electron magnetic moment, $eh/4\pi m_{e}=9.27\times10^{-24}\ \mathrm{J\,T^{-1}}$, written BM.11.2 12.3
chromiteThe chief ore of chromium, FeCr₂O₄ (FeO·Cr₂O₃), the starting material for sodium and potassium dichromate.11.1 11.2
complementary colourThe colour opposite the absorbed colour on the colour wheel; a substance that absorbs one part of white light appears in the complementary colour.11.2 12.3
d–d transitionThe jump of an electron between d orbitals of different energy in the same ion, absorbing visible light; it needs both a d electron and a d vacancy, so d⁰ and d¹⁰ ions show none.11.1 11.2 12.3
ferromagnetismVery strong attraction to a magnetic field, with permanent magnetisation possible, caused by the moments of neighbouring atoms aligning in domains (Fe, Co, Ni).11.2
first transition seriesThe ten d-block elements of period 4, scandium to zinc, in which the 3d subshell is being filled.2.4 10.1 11.1 11.2
interstitial compoundA compound in which small atoms (H, B, C, N) occupy holes in a metal lattice, e.g. TiC, Mn₄N, VH₀.₅₆; usually non-stoichiometric, very hard, high-melting and still metallic in conductivity.11.1 11.2
lanthanoidOne of the f-block elements from cerium ($Z=58$) to lutetium ($Z=71$), in which the $4f$ subshell is filled; lanthanum ($Z=57$) is studied with them. Symbol Ln.9.1 10.1 11.1 11.3
lanthanoid contractionThe steady decrease in atomic and ionic radii from La to Lu (about $17\ \mathrm{pm}$ for $\mathrm{Ln^{3+}}$), caused by poor shielding by $4f$ electrons; it makes Zr and Hf almost the same size.10.1 11.1 11.3
pyrolusiteThe chief ore of manganese, MnO₂, the starting material for potassium manganate and permanganate.11.1 11.2
spin-only magnetic momentThe magnetic moment due to electron spin alone, $\mu=\sqrt{n(n+2)}$ BM for $n$ unpaired electrons; a good approximation for first-row transition-metal ions.3.4 11.2 11.3 12.3
transition elementAn element whose atom, or at least one of its common ions or compounds, has an incompletely filled d subshell (Sc to Cu in the first row; Zn, Cd and Hg are d-block elements but not transition elements).2.4 3.4 9.1 9.2
transuranium elementAn element with atomic number greater than 92 (uranium), from neptunium onwards; all are made artificially by nuclear reactions.11.3
uranyl ionThe linear oxocation $\mathrm{UO_{2}^{2+}}$ ($\mathrm{O{=}U{=}O}$) in which uranium is in the $+6$ state; the usual form of U(VI) in water and in salts such as uranyl nitrate.11.3
variable oxidation stateThe ability of an element to form stable compounds in several oxidation states; in transition metals the states usually differ by one unit because (n−1)d and ns electrons are close in energy.9.1 11.1 11.2
Ch 12 · Coordination Compounds
TermMeaningUsed in
ambidentate ligandA ligand with two different possible donor atoms that binds through only one of them at a time, e.g. $\mathrm{NO_{2}^{-}}$ (N or O) and $\mathrm{SCN^{-}}$ (S or N).12.1 12.2
chelateA complex in which a di- or polydentate ligand binds one metal through two or more donor atoms, closing a ring that contains the metal; such complexes are especially stable (the chelate effect).12.1 12.2 12.3 20.2
coordination entityA central metal atom or ion together with the ligands bonded directly to it — the part written inside square brackets, e.g. $\mathrm{[Co(NH_{3})_{6}]^{3+}}$.12.1
coordination isomerismStructural isomerism in a compound whose cation and anion are both complex ions, arising from a different distribution of ligands between the two metals, e.g. $\mathrm{[Co(NH_{3})_{6}][Cr(CN)_{6}]}$ and $\mathrm{[Cr(NH_{3})_{6}][Co(CN)_{6}]}$.12.2
coordination numberThe number of ligand donor atoms bonded directly to the central atom of a complex (6 in $\mathrm{[Co(en)_{3}]^{3+}}$, 4 in $\mathrm{[Ni(CO)_{4}]}$).10.1 11.3 12.1 12.2
crystal field splitting energyThe energy gap between the split sets of d orbitals in a complex: Δo between e_g and t₂g in an octahedral field, Δt between t₂ and e in a tetrahedral field (Δt ≈ 4/9 Δo).12.3
crystal field stabilisation energyThe net lowering of the d-electron energy caused by the splitting, measured from the barycentre: (−0.4x + 0.6y)Δo for t₂g^x e_g^y, plus P for each extra electron pair if pairing is included.12.3
crystal field theoryA model of complexes that treats the ligands as point charges or dipoles and considers only their electrostatic repulsion of the metal's d electrons, which splits the five d orbitals into sets of different energy.12.3
denticityThe number of donor atoms through which one ligand binds a single central atom: 1 for unidentate, 2 for didentate (en, oxalate), 6 for EDTA.12.1
double saltA compound of two simple salts in a fixed ratio that exists only as a solid and dissociates completely into the simple ions in water, e.g. Mohr's salt $\mathrm{FeSO_{4}\cdot (NH_{4})_{2}SO_{4}\cdot 6H_{2}O}$.12.1 20.1
facial isomerThe isomer of an octahedral $\mathrm{[MA_{3}B_{3}]}$-type complex in which the three identical ligands occupy one triangular face of the octahedron, all mutually cis.
high-spin complexA complex with the largest possible number of unpaired d electrons, formed when the splitting is smaller than the pairing energy (weak-field ligands, and all tetrahedral complexes).11.2 12.3
homoleptic complexA complex in which the metal is bound to only one kind of ligand, e.g. $\mathrm{[Fe(CN)_{6}]^{4-}}$; with more than one kind it is heteroleptic.12.1
hydrate isomerismStructural isomerism in which water (in general, the solvent) is a ligand in one isomer and water of crystallisation in another, e.g. the violet, light-green and dark-green forms of $\mathrm{CrCl_{3}\cdot 6H_{2}O}$.12.2
inner-orbital complexAn octahedral complex whose metal uses the inner (n−1)d orbitals in d²sp³ hybridisation; its d electrons are paired as far as possible (low spin), e.g. [Co(NH₃)₆]³⁺.12.3
ionisation isomerismStructural isomerism in which a counter ion and a ligand exchange places, so the isomers give different ions in solution, e.g. $\mathrm{[CoBr(NH_{3})_{5}]SO_{4}}$ and $\mathrm{[Co(NH_{3})_{5}(SO_{4})]Br}$.12.2
ligandAn ion or molecule that binds to the central atom of a complex by donating an electron pair from one or more donor atoms.3.2 3.3 5.3 6.3
linkage isomerismStructural isomerism in which an ambidentate ligand is bonded through different donor atoms, e.g. Co–NO₂ (nitrito-N) and Co–ONO (nitrito-O).12.2
low-spin complexA complex with the smallest possible number of unpaired d electrons, formed when Δo is larger than the pairing energy (strong-field ligands such as CN⁻ and CO).12.3
meridional isomerThe isomer of an octahedral $\mathrm{[MA_{3}B_{3}]}$-type complex in which the three identical ligands lie on a meridian of the octahedron, two of them trans to each other.
outer-orbital complexAn octahedral complex whose metal uses the outer nd orbitals in sp³d² hybridisation; its d electrons stay unpaired as far as possible (high spin), e.g. [CoF₆]³⁻.12.3
pairing energyThe energy P needed to place a second electron, of opposite spin, in an orbital already holding one. Low spin results when Δo > P, high spin when Δo < P.11.3 12.3
primary valencyIn Werner's theory, the ionisable valency of the metal: equal to its oxidation state and satisfied only by negative ions.12.1
secondary valencyIn Werner's theory, the non-ionisable, spatially directed valency of the metal: equal to its coordination number and satisfied by neutral molecules or negative ions.12.1
spectrochemical seriesThe experimental order of ligands by the size of the splitting they cause: I⁻ < Br⁻ < SCN⁻ < Cl⁻ < S²⁻ < F⁻ < OH⁻ < C₂O₄²⁻ < H₂O < NCS⁻ < edta⁴⁻ < NH₃ < en < CN⁻ < CO.12.3
Ch 13 · Purification and Characterisation of Organic Compounds
TermMeaningUsed in
ammonium phosphomolybdateThe canary-yellow precipitate $\mathrm{(NH_{4})_{3}PO_{4}\cdot12MoO_{3}}$ formed from phosphate and ammonium molybdate in nitric acid; it shows (and can be used to weigh) phosphorus.13.2
aqueous tensionThe vapour pressure of water at the temperature of a gas collected over water; it is subtracted from the total pressure to give the pressure of the dry gas.13.2
Carius methodEstimation of halogens (or sulphur) by heating the compound with fuming nitric acid and silver nitrate (or barium salts afterwards) in a sealed tube and weighing the AgX (or BaSO₄) formed.13.2
distribution coefficientThe constant ratio $K_{D}=C_{\text{org}}/C_{\text{aq}}$ of the concentrations of a solute in two immiscible solvents at equilibrium, at a fixed temperature.13.1
Dumas methodEstimation of nitrogen by heating the compound with copper(II) oxide so that its nitrogen is set free as N₂, whose volume is measured and converted to STP.13.2
fractional crystallisationSeparating two or more solids by their different solubilities: on cooling a solution, the less soluble one crystallises first and is filtered off.13.1
fractional distillationDistillation through a fractionating column, in which repeated condensation and re-vaporisation enrich the vapour in the more volatile liquid; used for miscible liquids with close boiling points.5.2 13.1 15.1
Kjeldahl's methodEstimation of nitrogen by digesting the compound with concentrated H₂SO₄ to ammonium sulphate, liberating NH₃ with NaOH and titrating it; not valid for nitro, azo and ring nitrogen.13.2
Lassaigne's testDetection of N, S and halogens in an organic compound by fusing it with sodium, which converts them into NaCN, Na₂S and NaX, and testing the aqueous extract for these ions.13.2 20.1
mobile phaseIn chromatography, the liquid or gas that moves through or over the stationary phase and carries the components of the mixture with it.13.1
mother liquorThe solution left after crystals have formed and been filtered off in crystallisation; it keeps the soluble impurities and some of the compound.13.1 20.1
Prussian blueIron(III) hexacyanidoferrate(II), $\mathrm{Fe_{4}[Fe(CN)_{6}]_{3}}$, the deep-blue solid whose formation shows nitrogen in Lassaigne's test.12.3 13.2 20.1 20.2
retardation factor$R_{f}$: the distance moved by a spot divided by the distance moved by the solvent front, both measured from the baseline; between 0 and 1, characteristic of a compound in a given system.13.1
sodium fusion extractThe alkaline filtrate obtained by plunging the red-hot sodium fusion tube into water, boiling and filtering; it contains CN⁻, S²⁻, X⁻ (or SCN⁻) ions from the compound.13.2 20.1
stationary phaseIn chromatography, the phase that stays in place — a solid adsorbent such as silica gel or alumina, or a liquid such as the water held in paper.13.1
steam distillationDistilling a steam-volatile compound that is immiscible with water by passing steam through it; the mixture boils below 373 K because the two vapour pressures add.3.4 13.1 17.2
Ch 14 · Some Basic Principles of Organic Chemistry
TermMeaningUsed in
alicyclic compoundA carbocyclic compound whose ring behaves like an open-chain (aliphatic) compound rather than an aromatic one, e.g. cyclohexane.14.1 15.1
bond-line formulaA drawing in which C atoms are corners and line ends, H atoms on carbon are omitted, and heteroatoms with their H atoms are written.14.1 14.2
carbanionA species with a negatively charged carbon carrying three bonds and a lone pair (eight valence electrons), usually $sp^{3}$ and pyramidal; stability $\mathrm{CH_{3}^{-}}\gt1^{\circ}\gt2^{\circ}\gt3^{\circ}$.14.3 15.2 15.3 15.4
carbocationA species with a positively charged, $sp^{2}$, planar carbon carrying three bonds and only six valence electrons; stability $3^{\circ}\gt2^{\circ}\gt1^{\circ}\gt\mathrm{CH_{3}^{+}}$.14.3 15.1 15.2 15.3
chiral centreAn sp³ carbon atom bonded to four different groups; a molecule with exactly one is chiral.14.2 15.3 16.1 17.1
degree of unsaturationRings plus π bonds in a molecule, found from the formula as (2C + 2 + N − H − X)/2; O and S are ignored.14.1 14.2 15.2 15.3
diastereomersStereoisomers that are not mirror images of each other; they have different physical properties (cis–trans isomers are an example).14.2 19.1
electrophileAn electron-pair acceptor that attacks electron-rich sites, e.g. $\mathrm{H^{+}}$, $\mathrm{NO_{2}^{+}}$, $\mathrm{BF_{3}}$, $\mathrm{AlCl_{3}}$, carbocations.14.3 15.1 15.2 15.3
enantiomersStereoisomers that are non-superimposable mirror images; they rotate plane-polarised light equally in opposite directions and otherwise have identical physical properties.12.2 14.2 15.1 16.2
enolA compound with an –OH on a C=C carbon; the tautomer of an aldehyde or ketone with an α-hydrogen.3.3 14.2 14.3 15.3
free radicalA neutral species with an unpaired electron, such as $\mathrm{CH_{3}^{\bullet}}$ or $\mathrm{Cl^{\bullet}}$; formed by homolysis and very reactive.3.1 14.1 14.3 15.1
functional groupAn atom or group of atoms (–OH, –CHO, –COOH, C=C, –NH₂ …) that gives an organic compound its characteristic reactions.14.1 14.2 16.1 16.2
geometrical isomerismStereoisomerism caused by restricted rotation about a double bond or in a ring, when each of the two atoms concerned carries two different groups.3.3 12.2 14.1 14.2
heterocyclic compoundA cyclic compound whose ring contains at least one atom other than carbon, such as O, N or S (furan, pyridine, oxolane).14.1 19.3
heterolytic fissionBreaking of a covalent bond in which both shared electrons go to one atom (usually the more electronegative), giving a cation and an anion.14.3 16.1 16.2
homologous seriesA family of compounds with the same functional group and general formula, successive members differing by one CH₂ unit (14 u).4.2 14.1 15.3 15.4
homolytic fissionBreaking of a covalent bond in which each atom keeps one of the two shared electrons, giving two free radicals; favoured by heat, light and non-polar bonds.14.3 15.1
hyperconjugationDelocalisation of $\mathrm{C{-}H}$ σ electrons on a carbon next to a carbocation, radical or π bond; the number of hyperconjugative structures equals the number of α-hydrogens.14.3 15.1 15.2 15.4
inductive effectPermanent shift of σ-bond electrons along a chain caused by an atom or group of different electronegativity; $-I$ groups withdraw, $+I$ groups release electrons, and the effect fades by roughly 60 % per bond.14.3 15.2 15.4 16.1
locantThe number in an IUPAC name that gives the position of a substituent, multiple bond or functional group on the parent chain or ring.14.1 15.1 15.2 15.3
meso compoundA compound with chiral centres that is achiral because of an internal plane of symmetry; optically inactive by internal compensation.14.2
mesomeric effectPermanent shift of π or lone-pair electrons through a conjugated system: $+M$ groups ($\mathrm{{-}OH}$, $\mathrm{{-}NH_{2}}$, halogens) donate, $-M$ groups ($\mathrm{{-}NO_{2}}$, $\mathrm{{-}CN}$, $\mathrm{{-}CHO}$) withdraw.14.3 18.1
metamerismStructural isomerism in which the same divalent group (–O–, –S–, –NH–, –CO–) carries the carbon atoms distributed differently on its two sides, e.g. ethoxyethane and 1-methoxypropane.14.2 18.1
nucleophileAn electron-pair donor that attacks electron-poor sites, e.g. $\mathrm{OH^{-}}$, $\mathrm{CN^{-}}$, $\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, carbanions.14.3 15.1 15.2 15.3
principal functional groupIn an IUPAC name, the most senior functional group present; it is cited as the suffix and receives the lowest possible locant.14.1
racemic mixtureAn equimolar mixture of two enantiomers, written (±); optically inactive by external compensation and separable by resolution.12.2 14.2 16.1 16.2
structural isomersCompounds with the same molecular formula whose atoms are bonded in a different order (chain, position, functional isomers, metamers, tautomers).12.2 14.2 14.3 15.1
tautomerismStructural isomerism in which two isomers interconvert rapidly, in dynamic equilibrium, by the shift of an H atom and a double bond, as in keto ⇌ enol.3.3 14.2 14.3 15.3
tetravalencyThe property of carbon of forming four covalent bonds in its stable compounds (a double bond counts as two, a triple bond as three).10.1 14.1
Ch 15 · Hydrocarbons
TermMeaningUsed in
acetylideA salt of a terminal alkyne in which the ≡C–H proton is replaced by a metal, e.g. $\mathrm{HC{\equiv}C^{-}Na^{+}}$ or the silver and copper(I) precipitates used to test for terminal alkynes.3.4 15.3
addition polymerisationJoining of many alkene (monomer) molecules through their double bonds into a long chain with no by-product, so M(polymer) = n × M(monomer).15.2
antiaromaticDescribes a planar, cyclic, fully conjugated system with $4n$ π electrons, which is less stable than its open-chain analogue (e.g. cyclobutadiene).15.4
areneAn aromatic hydrocarbon, such as benzene, toluene or naphthalene.15.3 15.4 16.1 17.3
arenium ionThe carbocation (σ-complex) formed when an electrophile bonds to a benzene ring; one ring carbon is $sp^{3}$ and the positive charge is spread over the other five.15.4 16.2 17.2
aromaticityThe extra stability of a cyclic, planar, fully conjugated system with $4n+2$ π electrons; aromatic compounds prefer substitution to addition.15.4 16.2
bromonium ionA three-membered cyclic cation of two carbons and a positive bromine, formed when Br₂ adds to an alkene; its back-side opening by Br⁻ gives anti addition without rearrangement.15.2
carbocation rearrangementMigration of H or an alkyl group with its bonding pair from a carbon next to a carbocation to the positive carbon (1,2-shift), giving a more stable cation.15.2 17.1
crackingBreaking higher alkanes into smaller alkanes, alkenes and hydrogen by heating (about 773 K) in the absence of air, often with a catalyst; it proceeds by free radicals.15.1 15.2
cyclic polymerisationJoining of three alkyne molecules into a benzene ring, e.g. $\mathrm{3HC{\equiv}CH\rightarrow C_{6}H_{6}}$ in a red-hot iron tube at 873 K.15.3 15.4
decarboxylationRemoval of the carboxyl carbon as $\mathrm{CO_{2}}$; heating a sodium carboxylate with soda lime gives an alkane with one carbon fewer: $\mathrm{RCOONa+NaOH\rightarrow RH+Na_{2}CO_{3}}$.15.1 15.4
dihedral angleViewed along a bond, the angle between a bond on the front atom and a bond on the rear atom; $0^{\circ}$ for eclipsed and $60^{\circ}$ for staggered ethane.15.1
electrophilic additionAddition to a C=C bond that starts with attack of the π electrons on an electrophile (H⁺ or a polarised halogen), giving a carbocation or halonium ion that a nucleophile then completes.15.2
Friedel–Crafts reactionAlkylation (with $\mathrm{RCl}$) or acylation (with $\mathrm{RCOCl}$) of an aromatic ring catalysed by anhydrous $\mathrm{AlCl_{3}}$.15.4 16.2 17.2 17.3
geminal dihalideA dihalide with both halogen atoms on the same carbon, e.g. $\mathrm{CH_{3}CBr_{2}CH_{3}}$; formed when two moles of HX add to an alkyne.15.3 16.1
Hückel's ruleA planar, cyclic, fully conjugated system is aromatic if it has $4n+2$ π electrons (2, 6, 10, …) and antiaromatic if it has $4n$.15.4
Kolbe electrolysisElectrolysis of an aqueous sodium or potassium carboxylate: the anion is oxidised at the anode, loses $\mathrm{CO_{2}}$, and two alkyl radicals join: $\mathrm{2\,RCOONa+2\,H_{2}O\rightarrow R{-}R+2\,CO_{2}+H_{2}+2\,NaOH}$.15.1
Lindlar's catalystPalladium on $\mathrm{CaCO_{3}}$ or $\mathrm{BaSO_{4}}$ partly poisoned (lead acetate, quinoline); with $\mathrm{H_{2}}$ it reduces an alkyne only as far as the cis-alkene.15.2 15.3
Markovnikov's ruleIn adding H–Z to an unsymmetrical alkene, H goes to the doubly bonded carbon with more hydrogens and Z to the other — because that path gives the more stable carbocation.15.2 16.1 17.1 17.3
meta directorAn electron-withdrawing substituent (e.g. $\mathrm{{-}NO_{2}}$, $\mathrm{{-}CHO}$, $\mathrm{{-}CN}$) that deactivates the ring and sends an incoming electrophile mainly to the 3-position.15.4 18.1 20.1
Newman projectionA drawing made by looking straight along a C–C bond: the front carbon is a point where three bonds meet, the rear carbon a circle from whose edge its three bonds emerge.15.1
nitronium ion$\mathrm{NO_{2}^{+}}$, the electrophile in aromatic nitration, formed from nitric acid by concentrated sulphuric acid.3.2 3.3 15.4 18.1
ortho/para directorA substituent (lone-pair donor or alkyl group) that sends an incoming electrophile mainly to the 2- and 4-positions.15.4 16.1 16.2 17.2
ozonideThe unstable five-membered cyclic compound (C–O–C bridge and an O–O link) formed when ozone adds to a C=C bond.15.2 17.3
ozonolysisCleavage of C=C bonds by ozone followed by Zn/H₂O; each former alkene carbon becomes a C=O group, so the products locate the double bond.15.2 17.3
peroxide effectAnti-Markovnikov addition of HBr (only HBr) to unsymmetrical alkenes in the presence of an organic peroxide, by a free-radical chain in which Br• adds first.15.2 15.3 16.1
sawhorse projectionA drawing of a molecule viewed obliquely along a C–C bond, which is shown as a long diagonal line with the three bonds of each carbon at its ends.15.1
Saytzeff ruleIn eliminations that can give more than one alkene, the more substituted (more stable) alkene is the major product.15.2 16.2 17.1
terminal alkyneAn alkyne with the triple bond at the end of the chain, $\mathrm{R{-}C{\equiv}C{-}H}$; its ≡C–H hydrogen is weakly acidic ($\mathrm{p}K_{a}\approx25$).15.3 16.2 17.3
torsional strainThe extra energy of a conformation caused by repulsion between eclipsed bonds on adjacent atoms; about $12.5\ \mathrm{kJ\,mol^{-1}}$ for eclipsed relative to staggered ethane.15.1
Wurtz reactionCoupling of two alkyl groups by heating a haloalkane with sodium in dry ether: $\mathrm{2\,RX+2\,Na\rightarrow R{-}R+2\,NaX}$. Doubles the carbon number; cannot give methane.15.1 16.2
Ch 16 · Organic Compounds Containing Halogens
TermMeaningUsed in
allylic halideA halide with X on an $sp^{3}$ carbon next to a C=C double bond, e.g. 3-chloropropene.16.1
ambident nucleophileA nucleophile with two different donor atoms, e.g. cyanide (C or N) and nitrite (N or O); KCN gives nitriles, AgCN isocyanides; KNO₂ gives nitrites, AgNO₂ nitroalkanes.16.2
benzylic halideA halide with X on an $sp^{3}$ carbon attached directly to an aromatic ring, e.g. (chloromethyl)benzene.16.1 16.2
Finkelstein reactionHalogen exchange that makes alkyl iodides: $\mathrm{R{-}Cl}$ or $\mathrm{R{-}Br}$ heated with NaI in dry acetone, driven forward because NaCl/NaBr precipitate.16.1
freonA chlorofluorocarbon such as $\mathrm{CCl_{2}F_{2}}$, once used as a refrigerant and propellant; in the stratosphere it releases Cl atoms that destroy ozone.16.1 16.2
Grignard reagentAn organomagnesium halide $\mathrm{RMgX}$ made from $\mathrm{RX}$ and Mg in dry ether; its carbon behaves as a carbanion and is destroyed by any O–H, N–H or other active hydrogen.14.3 16.1 16.2 17.1
haloalkaneA compound in which a halogen atom is bonded to an $sp^{3}$ carbon of an alkyl group, $\mathrm{R{-}X}$; classed as primary, secondary or tertiary by the number of carbons on the C–X carbon.14.1 14.3 15.1 15.2
haloareneA compound in which a halogen atom is bonded directly to an $sp^{2}$ carbon of an aromatic ring, $\mathrm{Ar{-}X}$, e.g. chlorobenzene.14.1 16.1 16.2 17.2
leaving groupThe atom or group that departs with the bonding electron pair in a substitution or elimination; weak, stable bases leave best ($\mathrm{I^{-}\gt Br^{-}\gt Cl^{-}\gg F^{-}}$).12.2 16.1 16.2 17.1
racemisationConversion of one enantiomer into an equal mixture of both, as when a nucleophile attacks both faces of a planar carbocation in an SN1 reaction.16.2
SN1 reactionTwo-step unimolecular nucleophilic substitution through a planar carbocation: rate $=k[\mathrm{RX}]$, racemisation, fastest for $3^{\circ}$, allylic and benzylic halides.16.1 16.2
SN2 reactionOne-step bimolecular nucleophilic substitution with backside attack: rate $=k[\mathrm{RX}][\mathrm{Nu}]$, inversion of configuration, fastest for $\mathrm{CH_{3}X}$ and $1^{\circ}$ halides.16.1 16.2 17.2
Swarts reactionPreparation of alkyl fluorides by heating an alkyl chloride or bromide with a metal fluoride such as AgF, $\mathrm{Hg_{2}F_{2}}$, $\mathrm{CoF_{2}}$ or $\mathrm{SbF_{3}}$.16.1 16.2
vic-dihalideA dihalide with the two halogen atoms on adjacent carbons, e.g. 1,2-dichloroethane (alkylene dihalide).16.1
vinylic halideA halide with X bonded directly to an $sp^{2}$ carbon of a C=C double bond, e.g. chloroethene; like aryl halides it resists nucleophilic substitution.16.1
Walden inversionThe inversion of configuration at carbon in an SN2 reaction, the three other groups flipping over like an umbrella.16.2
Ch 17 · Organic Compounds Containing Oxygen
TermMeaningUsed in
1,2-shiftMovement of H, an alkyl group or another group, with its bonding electron pair, from a carbon to the neighbouring positive carbon, giving a more stable carbocation.14.3 15.2 15.4 17.1
acetalA compound with two $\mathrm{{-}OR}$ groups on one carbon, formed from a carbonyl compound and excess alcohol with dry HCl; stable to base and used to protect a $\mathrm{C{=}O}$ group (called a ketal when made from a ketone).17.3 17.4 19.1
aldol condensationBase-catalysed combination of two carbonyl molecules (at least one with an α-hydrogen) to a β-hydroxy aldehyde or ketone, which can lose water to give an α,β-unsaturated carbonyl compound.17.4
alkoxide ionThe conjugate base $\mathrm{RO^{-}}$ of an alcohol, formed e.g. with sodium; a stronger base than $\mathrm{OH^{-}}$.14.3 16.2 17.1 17.2
Cannizzaro reactionDisproportionation of an aldehyde with no α-hydrogen in concentrated alkali into the carboxylate salt and the alcohol; in the crossed version methanal is the one oxidised.17.4
carbinol carbonThe carbon atom that carries the –OH group of an alcohol; the number of carbons bonded to it makes the alcohol primary (1°), secondary (2°) or tertiary (3°).17.1 17.3 18.1
carbonyl groupThe group $\mathrm{C{=}O}$: an $sp^{2}$ carbon double-bonded to oxygen, planar and polar, with an electrophilic carbon. It is the functional group of aldehydes and ketones.17.3 17.4 19.1 20.1
Clemmensen reductionReduction of a $\mathrm{C{=}O}$ group to $\mathrm{CH_{2}}$ with zinc amalgam and concentrated hydrochloric acid.17.4
cumene processIndustrial route to phenol: benzene + propene → cumene, air oxidation to cumene hydroperoxide, then acid cleavage to phenol and propanone.17.2
cyanohydrinA compound with $\mathrm{{-}OH}$ and $\mathrm{{-}CN}$ on the same carbon, formed when HCN adds to an aldehyde or ketone, e.g. $\mathrm{CH_{3}CH(OH)CN}$.17.3 17.4 19.1
dichlorocarbene$\mathrm{{:}CCl_{2}}$, a neutral, short-lived species with only six valence electrons on carbon; an electrophile formed from $\mathrm{CHCl_{3}}$ and a strong base.17.2 18.1 20.1
enolate ionThe anion formed when a base removes an α-hydrogen from a carbonyl compound; its negative charge is shared by resonance between the α-carbon and the oxygen.14.2 17.4
esterificationFormation of an ester from an alcohol and a carboxylic acid (acid-catalysed, reversible) or an acid chloride/anhydride; the alcohol loses only the H of its O–H.1.3 6.1 17.1 17.2
Fehling's solutionA deep-blue alkaline copper(II)–tartrate solution (Fehling A + Fehling B mixed); aliphatic aldehydes reduce it to a red-brown precipitate of $\mathrm{Cu_{2}O}$.17.4 19.1 20.1
haloform reactionReaction of a compound containing $\mathrm{CH_{3}CO{-}}$ (or $\mathrm{CH_{3}CH(OH){-}}$) with a halogen and alkali, giving $\mathrm{CHX_{3}}$ and the salt of an acid with one carbon fewer; with iodine it is the iodoform test.17.4 20.1
hemiacetalThe product of adding one molecule of alcohol to a carbonyl group: one carbon carrying both $\mathrm{{-}OH}$ and $\mathrm{{-}OR}$.17.3 19.1
hydroboration–oxidationAddition of $\mathrm{(BH_{3})_{2}}$ to an alkene followed by $\mathrm{H_{2}O_{2}/OH^{-}}$; it adds H and OH across C=C in the anti-Markovnikov sense, without a carbocation and so without rearrangement.17.1
Kolbe reactionSodium phenoxide + $\mathrm{CO_{2}}$ at about 400 K and 4–7 atm, then acid, gives 2-hydroxybenzoic acid (salicylic acid).17.2
Lucas testTest with anhydrous $\mathrm{ZnCl_{2}}$ in conc. HCl: a 3° alcohol turns the solution turbid at once, a 2° alcohol in about 5 minutes, a 1° alcohol not at room temperature.17.1 20.1
nucleophilic additionA reaction in which a nucleophile bonds to the carbonyl carbon and a proton (or other electrophile) to the oxygen, turning $\mathrm{C{=}O}$ into a single bond; the characteristic reaction of aldehydes and ketones.17.1 17.3 17.4
ortho effectThe observation that almost any substituent ortho to the COOH group makes benzoic acid stronger, whatever its electronic nature, mainly because it twists the COOH out of the ring plane.17.4 18.1
oximeThe product $\mathrm{R_{2}C{=}NOH}$ of an aldehyde or ketone with hydroxylamine (addition followed by loss of water).17.3 18.1 19.1
phenoxide ionThe conjugate base $\mathrm{C_{6}H_{5}O^{-}}$ of phenol; its negative charge is delocalised over the oxygen and the ortho and para ring carbons, which makes phenol far more acidic than alcohols.14.3 16.2 17.2 17.4
picric acid2,4,6-Trinitrophenol ($\mathrm{p}K_{a}\approx0.4$), a phenol made strongly acidic by three ortho/para nitro groups.14.1 17.2
pyridinium chlorochromate$\mathrm{C_{5}H_{5}NH^{+}ClCrO_{3}^{-}}$, a mild anhydrous oxidant that converts 1° alcohols into aldehydes (without further oxidation) and 2° alcohols into ketones.17.1 17.3
Reimer–Tiemann reactionPhenol + $\mathrm{CHCl_{3}}$ + aqueous NaOH, then acid, gives 2-hydroxybenzaldehyde; the electrophile is dichlorocarbene, $\mathrm{{:}CCl_{2}}$.17.2
Rosenmund reductionReduction of an acyl chloride to an aldehyde with hydrogen over palladium on barium sulphate, the catalyst partly poisoned (S or quinoline) so that the aldehyde is not reduced further.17.3
semicarbazoneThe product $\mathrm{R_{2}C{=}N{-}NH{-}CO{-}NH_{2}}$ of an aldehyde or ketone with semicarbazide; a crystalline derivative used for identification.17.3
Tollens' reagentAmmoniacal silver nitrate, containing $\mathrm{[Ag(NH_{3})_{2}]^{+}}$; aldehydes reduce it to metallic silver (a silver mirror), ketones do not.15.3 17.4 19.1 20.1
unsymmetrical etherAn ether $\mathrm{R{-}O{-}R'}$ whose two groups are different, e.g. methoxyethane or methoxybenzene.17.2
Williamson synthesisPreparation of an ether by $\mathrm{S_{N}2}$ reaction of an alkoxide or phenoxide ion with a methyl or primary alkyl halide.16.2 17.2
Wolff–Kishner reductionReduction of a $\mathrm{C{=}O}$ group to $\mathrm{CH_{2}}$ by forming the hydrazone and heating it with KOH in a high-boiling solvent; nitrogen is released.15.4 17.3 17.4
Ch 18 · Organic Compounds Containing Nitrogen
TermMeaningUsed in
ammonolysisSubstitution of the halogen of a haloalkane by ammonia (ethanolic $\mathrm{NH_{3}}$, sealed tube, about 373 K); it gives a mixture of 1°, 2° and 3° amines and the quaternary salt.18.1
arenediazonium saltA salt $\mathrm{ArN_{2}^{+}X^{-}}$, such as benzenediazonium chloride; stable in cold solution because the positive charge is delocalised into the ring, and a versatile intermediate in aromatic synthesis.13.2 16.1 17.2 18.1
arylamineAn amine whose nitrogen is bonded directly to a benzene-ring carbon, such as aniline, $\mathrm{C_{6}H_{5}NH_{2}}$. Its lone pair is delocalised into the ring, so it is a much weaker base than an alkylamine.18.1
azo couplingElectrophilic substitution of a phenol (mildly alkaline) or an aromatic amine (mildly acidic) by an arenediazonium ion, usually at the para position, giving an azo compound $\mathrm{Ar{-}N{=}N{-}Ar'}$ with both nitrogens retained.18.2
azo dyeA coloured compound containing the $\mathrm{{-}N{=}N{-}}$ group between aromatic rings, e.g. 4-hydroxyazobenzene (orange), aniline yellow and methyl orange; the extended conjugation absorbs visible light.13.2 18.2 20.1
Balz–Schiemann reactionPreparation of a fluoroarene: the diazonium salt is precipitated as $\mathrm{ArN_{2}^{+}BF_{4}^{-}}$ with $\mathrm{HBF_{4}}$, and the dry salt is heated to give $\mathrm{ArF+BF_{3}+N_{2}}$.18.2
carbylamine reactionThe isocyanide test: a primary amine heated with chloroform and ethanolic KOH gives a foul-smelling isocyanide, $\mathrm{R{-}N{\equiv}C}$. Secondary and tertiary amines do not respond.18.1 20.1
diazotisationConversion of a primary aromatic amine into an arenediazonium salt with nitrous acid ($\mathrm{NaNO_{2}}$ + mineral acid) at 273–278 K.18.2 20.1
Gabriel phthalimide synthesisPreparation of pure primary aliphatic amines: potassium phthalimide is alkylated by a haloalkane ($\mathrm{S_{N}2}$) and the N-alkylphthalimide is hydrolysed to $\mathrm{RNH_{2}}$.18.1
Gattermann reactionReplacement of the diazonium group by Cl or Br using copper powder and the halogen acid (HCl or HBr); usually lower-yielding than the Sandmeyer reaction.18.2
Hinsberg's reagentBenzenesulphonyl chloride, $\mathrm{C_{6}H_{5}SO_{2}Cl}$. With a 1° amine it gives a sulphonamide soluble in KOH, with a 2° amine one insoluble in KOH, and with a 3° amine no reaction.18.1
Hoffmann bromamide degradationConversion of a primary amide into a primary amine with one carbon fewer by $\mathrm{Br_{2}}$ and NaOH: $\mathrm{RCONH_{2}+Br_{2}+4NaOH\rightarrow RNH_{2}+Na_{2}CO_{3}+2NaBr+2H_{2}O}$.18.1
isocyanideA compound $\mathrm{R{-}N{\equiv}C}$ (a carbylamine), isomeric with the nitrile $\mathrm{R{-}C{\equiv}N}$ but bonded through nitrogen; isocyanides have an extremely unpleasant smell.14.1 16.2 18.1 20.1
nitrosonium ionThe electrophile $\mathrm{NO^{+}}$, formed when nitrous acid is protonated and loses water; it attacks the nitrogen of an amine in diazotisation.18.2
quaternary ammonium saltA salt $\mathrm{R_{4}N^{+}X^{-}}$ in which nitrogen carries four carbon groups and a positive charge; it has no lone pair and is the end product of exhaustive alkylation of an amine.18.1
Sandmeyer reactionReplacement of the diazonium group by Cl, Br or CN using a copper(I) salt: CuCl/HCl, CuBr/HBr or CuCN/KCN; $\mathrm{N_{2}}$ is evolved.16.1 18.2
Ch 19 · Biomolecules
TermMeaningUsed in
aldoseA monosaccharide containing an aldehyde group (at C1), e.g. glucose (an aldohexose) and ribose (an aldopentose).19.1 20.1
anomersCyclic forms of a sugar that differ only in configuration at the anomeric carbon (C1 of an aldose, C2 of a 2-ketose), e.g. α- and β-D-glucopyranose.19.1
Chargaff's rulesIn double-stranded DNA the amount of adenine equals that of thymine and guanine equals cytosine, so purines = pyrimidines; the ratio (A+T)/(G+C) varies between species.19.3
denaturationLoss of the native shape (secondary, tertiary, quaternary structure) and activity of a protein caused by heat, pH change or chemicals; the primary structure is unchanged.5.3 17.1 19.2
double helixThe structure of DNA: two antiparallel polynucleotide strands wound into a right-handed helix, backbones outside and bases paired inside by hydrogen bonds (A=T, G≡C); about $0.34\ \mathrm{nm}$ per base pair and 10 pairs per turn.19.3
enzymeA biological catalyst, almost always a globular protein, that lowers the activation energy of a specific reaction; it does not change the equilibrium constant.3.2 3.4 8.2 8.3
essential amino acidAn amino acid the human body cannot make and must obtain from food, e.g. valine, leucine, lysine, phenylalanine.19.2
fat-soluble vitaminA vitamin that dissolves in fats but not in water — A, D, E and K. It is absorbed with dietary fat and stored in the liver and fat tissue, so a large excess can be toxic.19.3
glycosidic linkageThe C–O–C link formed between the anomeric carbon of one sugar unit and an –OH of another, with loss of water; it joins the units of disaccharides and polysaccharides.19.1 19.2 19.3
Haworth projectionA drawing of a cyclic sugar as a flat ring seen edge-on, with groups shown above or below the ring; groups on the right of the Fischer projection point down.19.1
hormoneA chemical messenger secreted by an endocrine (ductless) gland into the blood, which regulates target cells in very small amounts; chemically a polypeptide (insulin), an amino-acid derivative (adrenaline, thyroxine) or a steroid (cortisol, testosterone).15.3 17.3 18.1 19.1
invert sugarThe equimolar mixture of glucose and fructose formed by hydrolysis of sucrose; it is laevorotatory (about $-20^\circ$), whereas sucrose is dextrorotatory.19.1
isoelectric pointThe pH (pI) at which an amino acid or protein has no net charge and does not move in an electric field; below it the molecule is positive, above it negative.19.2
ketoseA monosaccharide containing a ketone group, usually at C2, e.g. fructose (a ketohexose).19.1
monosaccharideA carbohydrate that cannot be hydrolysed into simpler polyhydroxy aldehydes or ketones, e.g. glucose, fructose, ribose.19.1
mutarotationThe gradual change in optical rotation of a fresh solution of one anomer until equilibrium with the other anomer (through the open chain) is reached; glucose ends at $+52.7^\circ$.19.1
nucleosideA base joined to a pentose (ribose or 2-deoxyribose) by an N-glycosidic bond at $\mathrm{C}1'$, e.g. adenosine. A nucleoside has no phosphate.19.3
nucleotideA nucleoside with a phosphate group esterified at $\mathrm{C}5'$ of the sugar, e.g. AMP; the monomer of nucleic acids.19.3
peptide bondThe amide link $\mathrm{{-}CO{-}NH{-}}$ formed between the –COOH of one amino acid and the –NH₂ of another with loss of water; planar because of resonance.19.2 19.3
phosphodiester linkageThe $3',5'$ link between nucleotides in a nucleic-acid chain: a phosphate esterified to $\mathrm{C}3'$ of one sugar and $\mathrm{C}5'$ of the next. A linear strand of $n$ nucleotides has $n-1$ of them.19.3
polypeptideA chain of more than about ten amino-acid residues joined by peptide bonds; a polypeptide of more than about a hundred residues is called a protein.19.2 19.3
purineA nitrogenous base with a six-membered ring fused to a five-membered ring; in nucleic acids, adenine (A) and guanine (G). It joins the sugar through N9.19.3
pyrimidineA nitrogenous base with one six-membered ring containing two N atoms; in nucleic acids, cytosine (C), thymine (T, DNA only) and uracil (U, RNA only). It joins the sugar through N1.19.3
reducing sugarA sugar that reduces Tollens' reagent and Fehling's or Benedict's solution because it has a free hemiacetal (or aldehyde) group: all monosaccharides, maltose and lactose, but not sucrose.19.1
water-soluble vitaminA vitamin of the B group or vitamin C. It dissolves in body fluids and excess is excreted in urine, so it must be eaten regularly; vitamin $\mathrm{B_{12}}$ is the one that the liver stores.19.3
zwitterionA species carrying both a positive and a negative charge but neutral overall, e.g. $\mathrm{H_{3}N^{+}CH(R)COO^{-}}$, the main form of an amino acid in the solid and near neutral pH.18.1 19.2
α-amino acidA compound $\mathrm{H_{2}N{-}CH(R){-}COOH}$ with the amino group on the carbon next to the carboxyl group; about twenty of them build proteins, all L except achiral glycine.19.2
α-helixA secondary structure in which a polypeptide chain coils into a right-handed spiral (3.6 residues per turn) held by H bonds between C=O of residue n and N–H of residue n + 4.3.4 19.2
β-pleated sheetA secondary structure of stretched polypeptide chains lying side by side, joined by hydrogen bonds between neighbouring chains, as in silk fibroin.3.4 19.2
TermMeaningUsed in
2,4-DNP testTest for the C=O group of aldehydes and ketones: 2,4-dinitrophenylhydrazine gives a yellow, orange or red precipitate of the 2,4-dinitrophenylhydrazone.17.3 17.4 20.1
brown ring testTest for nitrate: with fresh $\mathrm{FeSO_{4}}$ and concentrated $\mathrm{H_{2}SO_{4}}$ poured down the side, a brown ring of $\mathrm{[Fe(H_{2}O)_{5}(NO)]^{2+}}$ forms at the junction of the layers.20.2
ceric ammonium nitrate testTest for alcohols: the yellow reagent $\mathrm{(NH_{4})_{2}[Ce(NO_{3})_{6}]}$ turns red when an alcohol replaces a nitrate ligand on cerium(IV); phenols give a green-brown precipitate instead.11.3 20.1
coffee-cup calorimeterA simple constant-pressure calorimeter made of nested polystyrene cups with a lid, a thermometer and a stirrer; the heat of a change in solution shows up as a temperature change of the solution, giving $\Delta H$ directly.4.1 20.3
confirmatory testA test specific to one ion, done after its group has been found, that identifies it beyond doubt, e.g. dimethylglyoxime giving a rosy-red precipitate with $\mathrm{Ni^{2+}}$.20.2
dispersed phaseIn a colloid, the substance present as particles of roughly $1$–$1000\ \mathrm{nm}$ spread through the other substance (the dispersion medium); in a sol it is a solid.20.3
dispersion mediumIn a colloid, the continuous substance through which the particles of the dispersed phase are spread; in a hydrosol it is water.20.3
enthalpy of neutralisationThe enthalpy change when an acid and a base react in dilute solution to form one mole of water. For any strong acid with any strong base it is $-57.1\ \mathrm{kJ\,mol^{-1}}$, because the only reaction is $\mathrm{H^{+}(aq)+OH^{-}(aq)\rightarrow H_{2}O(l)}$; weak acids or bases give less.4.1 4.2 20.3
equivalence pointThe stage of a titration at which the titrant added is exactly the stoichiometric amount required by the analyte; a good indicator makes the observed end point coincide with it.6.4 7.2 20.2
functional-group testA fast reaction under mild conditions that one functional group gives with a visible or smellable result (colour, precipitate, gas, odour) and that compounds without the group do not give.20.1
group reagentIn salt analysis, a reagent that under stated conditions precipitates all cations of one analytical group and none of the later groups, e.g. $\mathrm{H_{2}S}$ in dilute HCl for group II.20.2
iodine clockA kinetics experiment in which a small fixed amount of thiosulphate and some starch are added to a reaction that makes iodine; the solution turns suddenly blue-black when the thiosulphate is used up, and the time taken is inversely proportional to the initial rate.8.1 20.3
layer testTest for bromide and iodide: chlorine water liberates $\mathrm{Br_{2}}$ or $\mathrm{I_{2}}$, which colour an added chloroform (or $\mathrm{CCl_{4}}$) layer orange-brown or violet respectively.20.2
lyophilic solA solvent-loving sol (starch, gum, gelatin in water) whose particles hold a layer of the medium; made simply by warming or stirring with the medium, reversible, and not easily coagulated by electrolytes.20.3
lyophobic solA solvent-hating sol (metals, $\mathrm{Fe(OH)_{3}}$, $\mathrm{As_{2}S_{3}}$) that must be made by special methods such as hydrolysis or double decomposition; it is stabilised only by the charge on its particles, is irreversible and is coagulated by small amounts of electrolyte.20.3
Mohr's saltFerrous ammonium sulphate, $\mathrm{FeSO_{4}\cdot(NH_{4})_{2}SO_{4}\cdot6H_{2}O}$ ($M=392$), a pale-green double salt that resists air oxidation; a standard source of $\mathrm{Fe^{2+}}$.12.1 20.1 20.2
potash alumThe double salt $\mathrm{K_{2}SO_{4}\cdot Al_{2}(SO_{4})_{3}\cdot24H_{2}O}$ (or $\mathrm{KAl(SO_{4})_{2}\cdot12H_{2}O}$), forming colourless octahedral crystals.12.1 20.1
primary standardA pure, air-stable, non-hygroscopic substance of fixed formula (e.g. oxalic acid dihydrate, anhydrous $\mathrm{Na_{2}CO_{3}}$, Mohr's salt) that can be weighed directly to make a standard solution.7.1 11.2 20.2
protecting groupA group introduced temporarily to mask a reactive functional group during a reaction elsewhere in the molecule and removed afterwards, e.g. acetylation of $\mathrm{{-}NH_{2}}$ before nitrating aniline.17.3 20.1
Schiff's reagentA magenta dye decolourised by sulphur dioxide; aldehydes restore its pink-magenta colour in the cold, ketones (almost) do not.17.4 19.1 20.1
self-indicatorA titrant whose own colour marks the end point, e.g. $\mathrm{KMnO_{4}}$: purple $\mathrm{MnO_{4}^{-}}$ is reduced to almost colourless $\mathrm{Mn^{2+}}$ until the first excess drop gives a permanent pink.20.2
standard solutionA solution whose concentration is known accurately, made by dissolving a weighed primary standard to a known volume or by standardising against one.5.1 20.2
titrantThe solution of accurately known concentration added from the burette in a titration; the solution in the flask is the analyte (titrand).6.4 7.1 7.3 11.2
Tyndall effectThe scattering of light by colloidal particles, which makes the path of a light beam through a sol visible from the side; a true solution shows no such path.20.3
water equivalentThe mass of water that has the same heat capacity as a calorimeter (vessel, stirrer and thermometer): $W=C_\text{cal}/c_\text{water}$, in grams. In a calculation the calorimeter can be replaced by $W$ grams of extra water.20.3