Chapter 11 · d- and f-Block Elements

11.1 Transition Elements: Configuration and Physical Trends

The transition elements fill an inner $(n-1)d$ subshell. That one fact explains their configurations (with the exceptions Cr and Cu), their small radii and high melting points, the slow rise of ionisation enthalpy, the many oxidation states that peak at manganese, and the trend in $E^{\circ}(\mathrm{M^{2+}/M})$ that makes copper the only first-row metal that does not dissolve in dilute acid.

Iron girders, titanium hip joints, chromium plating, copper wiring, a nickel coin, the cobalt in vitamin B12, the vanadium oxide that turns sulphur dioxide into sulphuric acid on an industrial scale — the metals in the middle of the periodic table are the metals of engineering and of much of biochemistry. They are hard, they melt at high temperatures, they conduct heat and electricity, and they form compounds in many oxidation states and in many colours. Manganese alone is found in seven oxidation states from $+1$ to $+7$; its $+2$ salts are pale pink, its $+6$ manganate is green and its $+7$ permanganate is deep purple.

Behind this variety lies one structural idea: in these elements the electrons being added go into an inner d subshell, $(n-1)d$, while the outermost $ns$ subshell stays almost unchanged. In this section we place the transition elements in the periodic table, write and justify their configurations, and then follow the first transition series (scandium to zinc) across the row: radii, metallic bonding and melting points, ionisation enthalpies, oxidation states and, finally, the standard electrode potentials that summarise how readily each metal forms its aqueous ions. Colour, magnetism, catalysis and two important compounds, $\mathrm{K_{2}Cr_{2}O_{7}}$ and $\mathrm{KMnO_{4}}$, follow in Section 11.2. We use the configurations and exchange energy of Section 2.4, the periodic trends of Section 9.2, oxidation numbers from Section 7.1 and electrode potentials from Section 7.3.

Position, electronic configuration and general characteristics

The d-block occupies groups 3 to 12, between the s-block (groups 1–2) and the p-block (groups 13–18). It has four rows, called transition series, according to the d subshell being filled: the 3d series (Sc to Zn, period 4), the 4d series (Y to Cd, period 5), the 5d series (La, then Hf to Hg, period 6) and the 6d series (Ac, then Rf to Cn, period 7). The name "transition" goes back to the idea that their properties are intermediate between those of the reactive s-block metals and the largely non-metallic p-block. The f-block elements (lanthanoids and actinoids), which are inserted after La and Ac, are the inner transition elements of Section 11.3.

📘 Definition 11.1 — Transition element

A transition element is an element whose atom has an incompletely filled d subshell, or which forms at least one common cation (or compound) with an incompletely filled d subshell.

By this definition zinc, cadmium and mercury (group 12) are not transition elements: they are $(n-1)d^{10}\,ns^{2}$ in the atom and $(n-1)d^{10}$ in their only common ion, $\mathrm{M^{2+}}$. They are d-block elements and are studied with the transition metals because they complete the series. Copper, silver and gold are transition elements even though their atoms are $(n-1)d^{10}\,ns^{1}$, because $\mathrm{Cu^{2+}}$ ($3d^{9}$), $\mathrm{Ag^{2+}}$ (in $\mathrm{AgF_{2}}$, $4d^{9}$) and $\mathrm{Au^{3+}}$ ($5d^{8}$) have incomplete d subshells.

The filling order of Section 2.4 places 4s before 3d: after argon, potassium and calcium fill 4s, and from scandium ($Z=21$) onwards the next ten electrons go into 3d. In the neutral atoms 3d and 4s are very close in energy, which is why two of the ten atoms break the simple pattern.

📐 Result 11.1 — Electronic configurations of the transition elements

The general outer configuration of a d-block element is

$$(n-1)d^{1-10}\,ns^{1-2}$$

(palladium, $4d^{10}\,5s^{0}$, is the one d-block atom with no outer s electron). For the first transition series, with $[\mathrm{Ar}]=1s^{2}\,2s^{2}\,2p^{6}\,3s^{2}\,3p^{6}$:

ElementScTiVCrMnFeCoNiCuZn
$Z$21222324252627282930
3d123556781010
4s2221222212
unpaired1236543210

Exceptions: $\mathrm{Cr}=[\mathrm{Ar}]\,3d^{5}\,4s^{1}$ (not $3d^{4}\,4s^{2}$) and $\mathrm{Cu}=[\mathrm{Ar}]\,3d^{10}\,4s^{1}$ (not $3d^{9}\,4s^{2}$). Moving one 4s electron into 3d gives a half-filled or completely filled d subshell, with extra exchange energy and a symmetrical charge distribution; this outweighs the small 4s–3d energy gap.

Ions: on ionisation the 4s electrons are lost first, then 3d. So every first-row cation $\mathrm{M^{x+}}$ ($x\ge2$, and $\mathrm{Cu^{+}}$) has the configuration $[\mathrm{Ar}]\,3d^{\,g-x}$, where $g$ is the group number (Sc 3 … Zn 12): the d-electron count of the metal in any compound is $g-x$.

Why is the electron that is added last a 3d electron, yet the first one removed a 4s electron? In potassium and calcium the 4s orbital lies below 3d because a 4s electron penetrates the argon core. As the nuclear charge grows along the series, the 3d electrons — which are not shielded by the 4s pair — feel the extra charge strongly and fall in energy, until in the ions 3d lies clearly below 4s. The outer 4s electrons are also further from the nucleus on average. The heavier series show more exceptions because there the $(n-1)d$ and $ns$ levels are even closer: $\mathrm{Nb}$ $4d^{4}\,5s^{1}$, $\mathrm{Mo}$ $4d^{5}\,5s^{1}$, $\mathrm{Ru}$ $4d^{7}\,5s^{1}$, $\mathrm{Pd}$ $4d^{10}\,5s^{0}$, $\mathrm{Ag}$ $4d^{10}\,5s^{1}$, $\mathrm{Pt}$ $5d^{9}\,6s^{1}$, $\mathrm{Au}$ $5d^{10}\,6s^{1}$. JEE Main asks mainly for the first series and for Pd, Ag, Pt, Au.

Occurrence. Iron is by far the most abundant transition metal (about 5 % of the Earth's crust by mass) and titanium is next; the others are much rarer, and the heavy platinum metals are among the rarest elements of all. The early metals occur mainly as oxides — titanium in rutile, $\mathrm{TiO_{2}}$, and ilmenite, $\mathrm{FeTiO_{3}}$; chromium in chromite, $\mathrm{FeCr_{2}O_{4}}$; manganese in pyrolusite, $\mathrm{MnO_{2}}$; iron in haematite, $\mathrm{Fe_{2}O_{3}}$, and magnetite, $\mathrm{Fe_{3}O_{4}}$ — while the later, softer metals favour sulphide ores — copper pyrites, $\mathrm{CuFeS_{2}}$, and zinc blende, $\mathrm{ZnS}$. Copper, silver, gold and platinum are also found native (uncombined), because their compounds are not much more stable than the metals.

General characteristics. All transition elements are metals. Nearly all are hard, strong, lustrous and have high melting and boiling points and high enthalpies of atomisation; they conduct heat and electricity well. Chemically they show variable oxidation states, form coloured and often paramagnetic compounds, act as catalysts, form many complexes, trap small atoms in interstitial compounds and form alloys with one another. Each of these properties traces back to a partly filled d subshell lying close in energy to the outer s subshell. Zn, Cd and Hg, with full d subshells, are the exceptions to most of the list: they are soft, low-melting (mercury is a liquid), show only the $+2$ state (and $\mathrm{Hg_{2}^{2+}}$), and give white, diamagnetic compounds.

✏️ Example 1 — Which elements count as transition elements?
(a) Write the ground-state configurations of Sc ($Z=21$), Cr ($Z=24$), Cu ($Z=29$) and Zn ($Z=30$), and the configurations of $\mathrm{Sc^{3+}}$, $\mathrm{Cu^{+}}$, $\mathrm{Cu^{2+}}$ and $\mathrm{Zn^{2+}}$. (b) Decide, using Definition 11.1, which of Sc, Cu and Zn are transition elements. (c) Silver ($Z=47$) is $[\mathrm{Kr}]\,4d^{10}\,5s^{1}$, and its common ion is $\mathrm{Ag^{+}}$. Why is silver nevertheless classed as a transition element?
How many unpaired electrons are there in a ground-state chromium atom?
(a) Atoms Sc $[\mathrm{Ar}]\,3d^{1}\,4s^{2}$; Cr $[\mathrm{Ar}]\,3d^{5}\,4s^{1}$ (6 unpaired: five 3d and one 4s); Cu $[\mathrm{Ar}]\,3d^{10}\,4s^{1}$; Zn $[\mathrm{Ar}]\,3d^{10}\,4s^{2}$.
(a) Ions 4s electrons leave first: $\mathrm{Sc^{3+}}=[\mathrm{Ar}]$ ($3d^{0}$); $\mathrm{Cu^{+}}=[\mathrm{Ar}]\,3d^{10}$; $\mathrm{Cu^{2+}}=[\mathrm{Ar}]\,3d^{9}$; $\mathrm{Zn^{2+}}=[\mathrm{Ar}]\,3d^{10}$. Check with $g-x$: Cu is in group 11, so $\mathrm{Cu^{2+}}$ has $11-2=9$ d electrons ✓.
(b) Sc: the atom has an incomplete 3d subshell ($3d^{1}$) — a transition element, although its only common ion is $d^{0}$. Cu: the atom's d subshell is full, but $\mathrm{Cu^{2+}}$ ($d^{9}$) is a common ion — a transition element. Zn: $d^{10}$ in the atom and in $\mathrm{Zn^{2+}}$ — not a transition element.
(c) Silver forms compounds such as $\mathrm{AgF_{2}}$ and $\mathrm{AgO}$ (which contains silver(III) with silver(I)), in which silver has an incomplete 4d subshell ($\mathrm{Ag^{2+}}=[\mathrm{Kr}]\,4d^{9}$). One such compound is enough under Definition 11.1.

Which pair of species has the same number of d electrons?

Physical properties: radii, metallic bonding, melting points and density

The transition metals pack their atoms in metallic lattices (mostly body-centred cubic, cubic close-packed or hexagonal close-packed). Both the size of the atoms and the strength of the bonding between them change in a characteristic way across a series, and both are governed by the d electrons.

📐 Result 11.2 — Atomic and ionic radii across a transition series

1. Across a series the metallic radius first decreases (Sc 164 pm → Ti 147 → V 135 → Cr 129 pm), then stays almost constant through the middle (Fe 126, Co 125, Ni 125 pm) and rises a little at the end (Cu 128, Zn 137 pm). Each step adds one proton and one $(n-1)d$ electron. A d electron shields the outer s electrons poorly (d orbitals are diffuse and do not penetrate), so the effective nuclear charge on the outer electrons grows and the atoms contract — but by much less than across the p-block, because the added electron is in an inner shell. Near the end the filled d subshell repels and shields more effectively and the radius grows again.

2. Ions of the same charge also contract across the series ($\mathrm{M^{2+}}$: Ti 86 pm → Ni 69 pm, approximately), and for one metal the radius falls as the charge rises ($\mathrm{Fe^{2+}}$ 78 pm, $\mathrm{Fe^{3+}}$ 65 pm).

3. Down a group the radius increases from the 3d to the 4d series (Ti 147 pm, Zr 160 pm), but the 4d and 5d members are almost the same size (Zr 160 pm, Hf 159 pm; Nb and Ta, Mo and W are similar pairs). The 14 electrons filling the 4f subshell before hafnium shield very poorly, and the resulting lanthanoid contraction (Section 11.3) cancels the expected increase. That is why Zr and Hf have almost identical chemistry and are very hard to separate.

Manganese (137 pm) breaks the smooth decrease; its unusual, complex crystal structure and weak metallic bonding (below) make its effective radius larger than its neighbours'. Because the radii change so little across the series, the atoms of different transition metals can replace one another in a lattice — the basis of alloy formation in Section 11.2 — and the density rises steadily from scandium ($3.0\ \mathrm{g\,cm^{-3}}$) to copper ($8.96\ \mathrm{g\,cm^{-3}}$): the mass of the atoms grows while their volume shrinks or stays the same.

Metallic bonding. In a transition metal, not only the $ns$ electrons but also the unpaired $(n-1)d$ electrons take part in metallic bonding, because the d orbitals of neighbouring atoms overlap. More bonding electrons means stronger interatomic bonding, which shows up as a higher enthalpy of atomisation ($\Delta_{a}H^{\circ}$, the enthalpy change for $\mathrm{M(s)\rightarrow M(g)}$; Section 4.2), higher melting and boiling points and greater hardness.

📐 Result 11.3 — Melting points and enthalpies of atomisation

1. Across each series, $\Delta_{a}H^{\circ}$ and the melting point rise to a maximum near the middle — around $d^{3}$–$d^{5}$ (groups 5–6), where the number of unpaired d electrons available for bonding is greatest — and then fall as the d electrons pair up. First series ($\Delta_{a}H^{\circ}$ in $\mathrm{kJ\,mol^{-1}}$): Sc 326, Ti 473, V 515, Cr 397, Mn 281, Fe 416, Co 425, Ni 430, Cu 339, Zn 126.

2. Manganese (and technetium in the 4d series) has an unusually low value: in $3d^{5}\,4s^{2}$ the half-filled 3d subshell holds its electrons tightly and they contribute little to metallic bonding. Zinc ($3d^{10}\,4s^{2}$, no unpaired d electrons, only the 4s pair for bonding) has the lowest value of the series and melts at only $693\ \mathrm{K}$.

3. The 4d and 5d metals have higher enthalpies of atomisation than their 3d congeners (their larger d orbitals overlap better), so metal–metal bonding is much commoner in heavy transition-metal compounds. Tungsten melts at $3695\ \mathrm{K}$, the highest of all metals.

4. A high $\Delta_{a}H^{\circ}$ makes a metal "noble": the energy needed to tear atoms out of the lattice is part of the cost of forming its ions, which is one reason platinum and gold resist attack and why copper's $E^{\circ}$ is positive (last subsection).

PropertyScTiVCrMnFeCoNiCuZn
metallic radius / pm164147135129137126125125128137
$\Delta_{a}H^{\circ}$ / $\mathrm{kJ\,mol^{-1}}$326473515397281416425430339126
melting point / K181419412183218015191811176817281358693
density / $\mathrm{g\,cm^{-3}}$2.994.516.117.197.217.878.908.918.967.14

Values are representative data-book values; different tables differ slightly. JEE Main asks for the trends and the anomalies (V/Cr high, Mn low, Zn lowest; Cu densest), not the numbers.

✏️ Example 2 — Reading a melting-point trend
(a) Arrange Ti, V, Mn and Zn in increasing order of enthalpy of atomisation and explain the order. (b) Why are the metallic radii of Fe, Co and Ni almost equal although the nuclear charge rises by two units from Fe to Ni? (c) Molybdenum and tungsten both lie below chromium. Predict which of the three has the highest enthalpy of atomisation, and give the reason.
(a) $\mathrm{Zn}\ (126)\lt\mathrm{Mn}\ (281)\lt\mathrm{Ti}\ (473)\lt\mathrm{V}\ (515)\ \mathrm{kJ\,mol^{-1}}$. V ($3d^{3}4s^{2}$, three unpaired d electrons) has more electrons for metallic bonding than Ti ($3d^{2}$). Mn's half-filled $3d^{5}$ holds its electrons tightly, so they bond weakly despite being unpaired. Zn has no unpaired d electrons and bonds with its two 4s electrons only.
(b) Each added proton is matched by an added 3d electron. Late in the series the extra d electrons repel one another and screen the outer 4s electrons, and this roughly cancels the attraction of the extra nuclear charge — so the radius stays near $125\ \mathrm{pm}$.
(c) Tungsten. Down group 6 the d orbitals (3d → 4d → 5d) become larger and overlap better between neighbouring atoms, so metallic bonding strengthens: $\Delta_{a}H^{\circ}$ is roughly $397$ (Cr), $658$ (Mo) and $849\ \mathrm{kJ\,mol^{-1}}$ (W), and W has the highest melting point of any metal.
Check In Interactive 1 choose "enthalpy of atomisation": the bars peak at V and dip sharply at Mn and Zn — exactly the order found in (a).

Removing a second electron is hardest for which first-row atom? In other words, which element of Sc–Zn has the largest second ionisation enthalpy?

Choose the property "second ionisation enthalpy" and step to Cu: its bar is the tallest, $1958\ \mathrm{kJ\,mol^{-1}}$, and the rank readout says "highest of 10" (Ni $1752$ and Zn $1734$ come next). $\mathrm{Cu^{+}}$ is $[\mathrm{Ar}]\,3d^{10}$, so the second electron must be torn out of a completely filled d subshell. For $\mathrm{Zn^{+}}$ ($3d^{10}\,4s^{1}$) the second electron is the lone 4s electron, which is easier. Cr shows a smaller spike ($1592$, higher than both V and Mn) for the same reason — $\mathrm{Cr^{+}}$ is $3d^{5}$.
Interactive 1 — Trend Explorer for the First Transition Series

Pick a property and an element. The bars show the property for Sc to Zn, with each atom's outer configuration underneath; the chosen element is highlighted and the verdict explains what its value tells you. Press Play to walk along the row. Watch for the dips at Mn and Zn, the spikes at Cr and Cu in the second ionisation enthalpy, and the single positive electrode potential.

Mn
element—
value—
rank in the row—
unpaired e⁻ (atom)—

Which statement best explains why zinc has the lowest melting point and enthalpy of atomisation in the first transition series?

Ionisation enthalpies and oxidation states

To form a cation the metal must give up electrons, so ionisation enthalpies decide which oxidation states are easy to reach. Across the first series they rise, but much more slowly than across a p-block period.

$\Delta_{i}H$ / $\mathrm{kJ\,mol^{-1}}$ScTiVCrMnFeCoNiCuZn
first631656650653717762758736745906
second1235130914141592150915611644175219581734
third2393265728332990326029623243340235563837
📐 Result 11.4 — Ionisation enthalpies of the first transition series

1. Slow overall rise. The nuclear charge rises by one at each step, but the added electron goes into the inner 3d subshell and partly shields the 4s electrons. The effective nuclear charge on the outer electrons therefore grows only slowly, and the first ionisation enthalpies are similar (about $630$–$760\ \mathrm{kJ\,mol^{-1}}$ from Sc to Cu).

2. Irregularities come from the stability of $d^{5}$ and $d^{10}$ (exchange energy):

  • Second ionisation enthalpy is exceptionally high for Cr and Cu: $\mathrm{Cr^{+}}=3d^{5}$ and $\mathrm{Cu^{+}}=3d^{10}$, so the second electron breaks a half-filled or filled subshell. It is relatively low for Mn ($\mathrm{Mn^{+}}=3d^{5}\,4s^{1}$ loses its 4s electron).
  • Third ionisation enthalpy is exceptionally high for Mn ($\mathrm{Mn^{2+}}=3d^{5}\rightarrow3d^{4}$) and Zn ($\mathrm{Zn^{2+}}=3d^{10}\rightarrow3d^{9}$), and low for Fe ($\mathrm{Fe^{2+}}=3d^{6}\rightarrow3d^{5}$, which gains stability).
  • Zinc's first ionisation enthalpy (906) is the highest: its electron comes from a filled $4s^{2}$ pair over a filled $3d^{10}$ core.

3. Using the sums. The total energy needed for a given state, $\Delta_{i}H_{1}+\Delta_{i}H_{2}+\dots$, compared between metals, tells which metal's ion in that state is easier to form; whether the ion is stable in a compound also depends on the lattice or hydration enthalpy that is released.

📘 Definition 11.2 — Variable oxidation states

An element shows variable oxidation states when it forms stable compounds in several oxidation states. In transition metals the energies of the $(n-1)d$ and $ns$ electrons are so close that different numbers of them can be used in bonding, and successive oxidation states usually differ by one unit (e.g. $\mathrm{V^{2+}}$, $\mathrm{V^{3+}}$, $\mathrm{VO^{2+}}$, $\mathrm{VO_{2}^{+}}$), unlike p-block elements, whose states commonly differ by two (Sn(II)/Sn(IV), Pb(II)/Pb(IV)). The highest state equal to the total number of $ns$ and $(n-1)d$ electrons — the group number — is called the group oxidation state.

📐 Result 11.5 — Oxidation states of the first transition series

Known states (common ones in bold): Sc +3; Ti +2, +3, +4; V +2, +3, +4, +5; Cr +2, +3, +4, +5, +6; Mn +2, +3, +4, +5, +6, +7; Fe +2, +3, +4, +6; Co +2, +3, +4; Ni +2, +3, +4; Cu +1, +2; Zn +2.

  • Number of states is greatest in the middle: manganese shows the most (+2 to +7). At the start there are few electrons to lose (Sc only +3); at the end there are too many d electrons and too few vacant d orbitals to use in bonding (Zn only +2).
  • Highest state equals the group oxidation state from Sc (+3) to Mn (+7). After Mn the d electrons are held more tightly (rising effective nuclear charge), and the highest state falls: Fe +6 (rare), Co +4, Ni +4, Cu +2, Zn +2.
  • Low states become more stable along the row: +2 is unknown or strongly reducing at the start ($\mathrm{Ti^{2+}}$, $\mathrm{V^{2+}}$, $\mathrm{Cr^{2+}}$) and is the common state from Mn onwards. Oxidation state $0$ (and even negative states) appears in compounds with π-accepting ligands such as CO: $\mathrm{Ni(CO)_{4}}$, $\mathrm{Fe(CO)_{5}}$.
  • Higher states are oxidising, lower states reducing; in the high states the metal is found in oxides and oxoanions ($\mathrm{CrO_{4}^{2-}}$, $\mathrm{MnO_{4}^{-}}$), not as bare $\mathrm{M^{6+}}$ or $\mathrm{M^{7+}}$ cations.
  • Down a group the higher states become more stable (the opposite of the p-block inert-pair trend): Cr(VI) in dichromate is a strong oxidant, but Mo(VI) and W(VI) compounds are stable and barely oxidising. Ni(II) is the stable nickel state, Pt(IV) the stable platinum state.

Highest oxidation states with oxygen and fluorine. High oxidation states are reached only with the most electronegative partners, oxygen and fluorine. Fluorine stabilises them because it is small and very electronegative, so the lattice enthalpy of an ionic fluoride or the bond enthalpy of a covalent one is large: $\mathrm{TiF_{4}}$ (+4), $\mathrm{VF_{5}}$ (+5), $\mathrm{CrF_{5}}$ (+5), $\mathrm{CoF_{3}}$ (+3). Oxygen goes even higher. An oxide ion can form multiple bonds to the metal (a σ bond plus π bonds using filled O 2p and empty metal d orbitals), and fewer oxygen atoms are needed than fluorine atoms for the same oxidation state. So the highest manganese fluoride is $\mathrm{MnF_{4}}$ (+4), while the highest oxide is $\mathrm{Mn_{2}O_{7}}$ (+7), a covalent molecule with $\mathrm{Mn{=}O}$ bonds and one $\mathrm{Mn{-}O{-}Mn}$ bridge. Likewise chromium reaches +6 in $\mathrm{CrO_{3}}$ and $\mathrm{CrO_{4}^{2-}}$ but only +5 in its fluoride. The highest oxides of the series are $\mathrm{Sc_{2}O_{3}}$, $\mathrm{TiO_{2}}$, $\mathrm{V_{2}O_{5}}$, $\mathrm{CrO_{3}}$ and $\mathrm{Mn_{2}O_{7}}$.

📐 Result 11.6 — Oxides: oxidation state and acidic character

For one metal, the oxide becomes more covalent and more acidic as the oxidation state rises (a smaller, more highly charged metal centre polarises the oxide ions and pulls electron density from them):

  • Manganese: $\mathrm{MnO}$ (+2) basic; $\mathrm{Mn_{2}O_{3}}$ (+3) basic; $\mathrm{MnO_{2}}$ (+4) amphoteric; $\mathrm{Mn_{2}O_{7}}$ (+7) acidic — it dissolves in water as permanganic acid, $\mathrm{HMnO_{4}}$.
  • Chromium: $\mathrm{CrO}$ (+2) basic; $\mathrm{Cr_{2}O_{3}}$ (+3) amphoteric; $\mathrm{CrO_{3}}$ (+6) acidic (gives $\mathrm{H_{2}CrO_{4}}$ and $\mathrm{H_{2}Cr_{2}O_{7}}$).
  • Vanadium: $\mathrm{V_{2}O_{5}}$ is amphoteric, though mainly acidic: it dissolves in alkali as vanadate, $\mathrm{VO_{4}^{3-}}$, and in strong acid as $\mathrm{VO_{2}^{+}}$.
🧭 Problem-solving strategy — Oxidation state, d count and stability
  1. Oxidation state $x$ of the metal from the formula (rules of Section 7.1): O = −2 (except peroxides), F = −1, the charges of the ions add up to the overall charge.
  2. d-electron count = group number − $x$ (first row: Sc 3, Ti 4, V 5, Cr 6, Mn 7, Fe 8, Co 9, Ni 10, Cu 11, Zn 12). It is valid for any cation because the 4s electrons leave first.
  3. Look for $d^{0}$, $d^{5}$, $d^{10}$: such states are extra stable ($\mathrm{Sc^{3+}}$, $\mathrm{Ti^{4+}}$; $\mathrm{Mn^{2+}}$, $\mathrm{Fe^{3+}}$; $\mathrm{Zn^{2+}}$), and the ion one electron away from them tends to be oxidising or reducing.
  4. In water, use $E^{\circ}$ (last subsection): it combines ionisation enthalpies with hydration enthalpies and settles questions such as "is $\mathrm{Cu^{+}}$ or $\mathrm{Cu^{2+}}$ more stable in solution?".
✏️ Example 3 — Oxidation states and d counts
Find the oxidation state and the number of d electrons of the metal in (a) $\mathrm{MnO_{4}^{2-}}$, (b) $\mathrm{Cr_{2}O_{7}^{2-}}$, (c) $\mathrm{VO^{2+}}$, (d) $\mathrm{FeO_{4}^{2-}}$, (e) $\mathrm{[Fe(CN)_{6}]^{3-}}$ ($\mathrm{CN^{-}}$ is a singly charged ligand), (f) $\mathrm{Ni(CO)_{4}}$ (CO is neutral). Which of these species have a $d^{0}$ metal centre?
Find the number of d electrons on manganese in $\mathrm{MnO_{4}^{2-}}$ first:
(a) $x+4(-2)=-2\Rightarrow x=+6$; Mn is in group 7: $7-6=1$, a $d^{1}$ ion (manganate, green).
(b) $2x+7(-2)=-2\Rightarrow x=+6$; $6-6=0$: $d^{0}$.
(c), (d) $\mathrm{VO^{2+}}$: $x-2=+2\Rightarrow x=+4$, $5-4=1$: $d^{1}$ (the blue vanadyl ion). $\mathrm{FeO_{4}^{2-}}$: $x-8=-2\Rightarrow x=+6$, $8-6=2$: $d^{2}$ (ferrate, a rare high state of iron).
(e), (f) $\mathrm{[Fe(CN)_{6}]^{3-}}$: $x+6(-1)=-3\Rightarrow x=+3$, $8-3=5$: $d^{5}$. $\mathrm{Ni(CO)_{4}}$: $x=0$; with oxidation state zero the formula $g-x$ gives the 10 valence electrons, which in the complex are all treated as d electrons: $d^{10}$.
Answer Only dichromate has a $d^{0}$ metal. Its intense orange colour therefore cannot come from d–d transitions — a point taken up in Section 11.2.
✏️ Example 4 — Ionisation enthalpies decide the stable state (JEE level)
(a) Explain why the third ionisation enthalpy of manganese ($3260\ \mathrm{kJ\,mol^{-1}}$) is higher than that of iron ($2962\ \mathrm{kJ\,mol^{-1}}$), although iron has the larger nuclear charge. (b) For nickel and platinum the sums of ionisation enthalpies are approximately: $\Delta_{i}H_{1}+\Delta_{i}H_{2}$ = $2490$ (Ni) and $2660$ (Pt) $\mathrm{kJ\,mol^{-1}}$; $\Delta_{i}H_{1}+\dots+\Delta_{i}H_{4}$ = $11\,290$ (Ni) and $9\,360$ (Pt) $\mathrm{kJ\,mol^{-1}}$. Which is the more stable state for each metal, +2 or +4? (c) By how much does it cost less to make $\mathrm{Pt^{4+}}$ than $\mathrm{Ni^{4+}}$?
(a) The third electron of Mn comes from $\mathrm{Mn^{2+}}=3d^{5}$, breaking the half-filled subshell (loss of exchange energy). The third electron of Fe comes from $\mathrm{Fe^{2+}}=3d^{6}$ and leaves $3d^{5}$ — the change creates the stable configuration. Hence $\Delta_{i}H_{3}(\mathrm{Mn})\gt\Delta_{i}H_{3}(\mathrm{Fe})$, and $\mathrm{Mn^{2+}}$ is the stable manganese ion while iron(II) is readily oxidised to iron(III).
(b) Reaching +2 costs less for nickel (2490 vs 2660), so nickel(II) compounds are the more stable for Ni. Reaching +4 costs much less for platinum (9360 vs 11 290), so platinum(IV) compounds (e.g. $\mathrm{[PtCl_{6}]^{2-}}$) are stable, whereas nickel(IV) compounds are rare and strongly oxidising.
(c) $11\,290-9\,360=1\,930\ \mathrm{kJ\,mol^{-1}}$ less for platinum.
Insight This is the "higher states more stable down a group" rule of Result 11.5 seen in numbers: the 5d electrons of Pt are further out and better shielded, so its third and fourth ionisations are cheaper.

Which first-row transition element shows the largest number of different oxidation states?

Step the element slider to Mn: the readout "states known" shows 6 (+2 to +7), more than Cr (5: +2 to +6), V (4) and Fe (4). Mn has seven valence electrons ($3d^{5}\,4s^{2}$) and can use any number of them from 2 to 7. On the map the red line of highest states climbs along the dashed "group number" line up to Mn and then falls away.
Interactive 2 — Oxidation-State Map of Sc to Zn

Each column is an element, each row an oxidation state. Filled dots are common states, open dots known but less common ones. The dashed line is the group number (all $3d+4s$ electrons used); the red line joins the highest known states. Choose an element and a state to see the d-electron count of the metal and a typical compound. Play walks along the row showing each element's highest state.

Mn+7
metal centre—
d electrons—
states known—
example—

The highest fluoride of manganese is $\mathrm{MnF_{4}}$, but its highest oxide is $\mathrm{Mn_{2}O_{7}}$. The best explanation is that

Standard electrode potentials and the stability of ions in water

In water, the tendency of a metal to form $\mathrm{M^{2+}(aq)}$ is measured by the standard electrode potential $E^{\circ}(\mathrm{M^{2+}/M})$ of Section 7.3: the more negative it is, the more readily the metal is oxidised, and a metal with a negative value displaces hydrogen from 1 M acid. The tendency of $\mathrm{M^{2+}}$ to become $\mathrm{M^{3+}}$ is measured by $E^{\circ}(\mathrm{M^{3+}/M^{2+}})$.

$E^{\circ}$ / VTiVCrMnFeCoNiCuZn
$\mathrm{M^{2+}/M}$−1.63−1.18−0.91−1.18−0.44−0.28−0.25+0.34−0.76
$\mathrm{M^{3+}/M^{2+}}$−0.37−0.26−0.41+1.57+0.77+1.97———

Why the values are what they are becomes clear if we split $\mathrm{M(s)\rightarrow M^{2+}(aq)}$ into steps, a Hess's-law cycle exactly like the Born–Haber cycle of Section 3.1:

$$\mathrm{M(s)}\xrightarrow{\ \Delta_{a}H^{\circ}\ }\mathrm{M(g)}\xrightarrow{\ \Delta_{i}H_{1}+\Delta_{i}H_{2}\ }\mathrm{M^{2+}(g)}\xrightarrow{\ \Delta_{hyd}H\ }\mathrm{M^{2+}(aq)}$$ $$\Delta H(\mathrm{M(s)\rightarrow M^{2+}(aq)})=\Delta_{a}H^{\circ}+\Delta_{i}H_{1}+\Delta_{i}H_{2}+\Delta_{hyd}H .$$

The first two terms cost energy, the hydration enthalpy (large and negative for small, doubly charged ions) pays some of it back. The larger the net $\Delta H$, the harder it is to form the aqueous ion and the less negative (or more positive) $E^{\circ}(\mathrm{M^{2+}/M})$. (Entropy changes are similar for the metals of one row, so the enthalpy picture gives the trend.)

📐 Result 11.7 — Trends in $E^{\circ}(\mathrm{M^{2+}/M})$

1. General trend. $E^{\circ}(\mathrm{M^{2+}/M})$ becomes less negative across the series (Ti −1.63 V → Ni −0.25 V), mainly because $\Delta_{i}H_{1}+\Delta_{i}H_{2}$ increases.

2. Copper is the only first-row metal with a positive value (+0.34 V). Its high $\Delta_{a}H^{\circ}$ (339) plus its high $\Delta_{i}H_{1}+\Delta_{i}H_{2}$ (2703) is not repaid by the hydration enthalpy of $\mathrm{Cu^{2+}}$. So copper does not liberate $\mathrm{H_{2}}$ from dilute acids; it dissolves only in oxidising acids ($\mathrm{HNO_{3}}$, hot concentrated $\mathrm{H_{2}SO_{4}}$), where the anion, not $\mathrm{H^{+}}$, is reduced.

3. Anomalies: Mn (−1.18) and Zn (−0.76) are more negative than the trend suggests because their ions $\mathrm{Mn^{2+}}$ ($d^{5}$) and $\mathrm{Zn^{2+}}$ ($d^{10}$) are extra stable (and Zn's $\Delta_{a}H^{\circ}$ is very low). Ni is more negative than its high ionisation enthalpies alone suggest because $\mathrm{Ni^{2+}}$ has the most negative hydration enthalpy of the series.

All the first-row metals except copper therefore dissolve in dilute non-oxidising acids, e.g. $\mathrm{Fe(s)+2H^{+}(aq)\rightarrow Fe^{2+}(aq)+H_{2}(g)}$, although some (Ti, V, Cr) react slowly because a thin oxide film protects them (passivity).

📐 Result 11.8 — $E^{\circ}(\mathrm{M^{3+}/M^{2+}})$ and the stability of oxidation states in water
  • Large positive values — $\mathrm{Mn^{3+}}$ (+1.57 V) and $\mathrm{Co^{3+}}$ (+1.97 V) — mean the $\mathrm{M^{3+}}$ ion is a strong oxidising agent in water. For Mn the cause is the stability of $\mathrm{Mn^{2+}}$ ($d^{5}$) and the high third ionisation enthalpy of Mn. $\mathrm{Co^{3+}(aq)}$ even oxidises water, liberating $\mathrm{O_{2}}$ (though cobalt(III) is very stable in complexes with ammonia or cyanide; Unit 12).
  • Small value for iron (+0.77 V): both $\mathrm{Fe^{2+}}$ and $\mathrm{Fe^{3+}}$ exist in water; air slowly oxidises iron(II) to iron(III) ($d^{5}$).
  • Negative values — Ti (−0.37), V (−0.26), Cr (−0.41) — mean $\mathrm{M^{2+}}$ is a reducing agent. $\mathrm{Cr^{2+}}$ ($d^{4}$) is a strong reductant because it becomes $\mathrm{Cr^{3+}}$ ($d^{3}$, a half-filled $t_{2g}$ level in water; Unit 12): $2\mathrm{Cr^{2+}(aq)+2H^{+}(aq)\rightarrow 2Cr^{3+}(aq)+H_{2}(g)}$.
  • Comparing a pair: $\mathrm{Cr^{2+}}$ is reducing and $\mathrm{Mn^{3+}}$ oxidising although both are $d^{4}$: chromium moves to a more stable $d^{3}$, manganese to $d^{5}$.
  • $\mathrm{Cu^{+}(aq)}$ disproportionates in water: $2\mathrm{Cu^{+}(aq)\rightarrow Cu^{2+}(aq)+Cu(s)}$ (Unit 7: $E^{\circ}(\mathrm{Cu^{+}/Cu})=+0.52$ V exceeds $E^{\circ}(\mathrm{Cu^{2+}/Cu^{+}})=+0.15$ V). Although $\mathrm{Cu^{+}}$ is $d^{10}$, the hydration enthalpy of the small, doubly charged $\mathrm{Cu^{2+}}$ is so much more negative that it more than pays the second ionisation enthalpy. Copper(I) survives only in insoluble or complexed compounds ($\mathrm{CuCl}$, $\mathrm{CuI}$, $\mathrm{Cu_{2}O}$).
✏️ Example 5 — Why copper resists dilute acid (JEE level)
Use these approximate data ($\mathrm{kJ\,mol^{-1}}$) to find $\Delta H$ for $\mathrm{M(s)\rightarrow M^{2+}(aq)}$ for Ni, Cu and Zn, and show that the order of the results matches the order of $E^{\circ}(\mathrm{M^{2+}/M})$: Ni −0.25 V, Cu +0.34 V, Zn −0.76 V.
$\Delta_{a}H^{\circ}$$\Delta_{i}H_{1}$$\Delta_{i}H_{2}$$\Delta_{hyd}H(\mathrm{M^{2+}})$
Ni4307361752−2105
Cu3397451958−2100
Zn1269061734−2046
Work out $\Delta H$ for $\mathrm{Cu(s)\rightarrow Cu^{2+}(aq)}$ before you open the solution:
Ni $430+736+1752-2105=813\ \mathrm{kJ\,mol^{-1}}$.
Cu $339+745+1958-2100=942\ \mathrm{kJ\,mol^{-1}}$.
Zn $126+906+1734-2046=720\ \mathrm{kJ\,mol^{-1}}$.
Compare $\Delta H$: $\mathrm{Zn}\ (720)\lt\mathrm{Ni}\ (813)\lt\mathrm{Cu}\ (942)$; $E^{\circ}$: $\mathrm{Zn}\ (-0.76)\lt\mathrm{Ni}\ (-0.25)\lt\mathrm{Cu}\ (+0.34)$ — the same order. Copper has by far the most costly path: its second ionisation enthalpy (breaking $3d^{10}$) and its atomisation enthalpy are both large, and the hydration of $\mathrm{Cu^{2+}}$ is no better than that of $\mathrm{Ni^{2+}}$. Zinc's path is cheapest mainly because of its tiny atomisation enthalpy (126).
Note The cycle explains trends; it cannot give $E^{\circ}$ itself, which also needs the $\mathrm{H^{+}/H_{2}}$ half of the cell and the entropy terms.
✏️ Example 6 — Oxidants, reductants and disproportionation (JEE level)
(a) Using $E^{\circ}(\mathrm{M^{3+}/M^{2+}})$, arrange $\mathrm{Mn^{3+}}$, $\mathrm{Fe^{3+}}$ and $\mathrm{Co^{3+}}$ in order of increasing oxidising power, and say which $\mathrm{M^{2+}}$ ion of Ti, V, Cr is the strongest reductant. (b) Explain why copper(II) iodide does not exist: write the balanced ionic equation for the reaction of $\mathrm{Cu^{2+}(aq)}$ with $\mathrm{I^{-}(aq)}$. (c) A solution of copper(I) sulphate (made in a non-aqueous solvent) is poured into water. What is seen? Write the equation.
(a) The more positive $E^{\circ}(\mathrm{M^{3+}/M^{2+}})$, the stronger $\mathrm{M^{3+}}$ is as an oxidant: $\mathrm{Fe^{3+}}\ (0.77)\lt\mathrm{Mn^{3+}}\ (1.57)\lt\mathrm{Co^{3+}}\ (1.97)$. The most negative value belongs to Cr (−0.41 V), so $\mathrm{Cr^{2+}}$ is the strongest reductant of the three.
(b) $\mathrm{Cu^{2+}}$ oxidises iodide, and copper(I) iodide precipitates (removing $\mathrm{Cu^{+}}$ drives the reaction): $$\mathrm{2Cu^{2+}(aq)+4I^{-}(aq)\rightarrow 2CuI(s)+I_{2}(s)}$$ Check — atoms: Cu 2 = 2, I 4 = 2 + 2; charge: $+4-4=0$ on the left, $0$ on the right ✓. (Iodometric estimation of copper uses exactly this reaction.)
(c) A red-brown deposit of copper forms and the solution turns blue: $\mathrm{Cu_{2}SO_{4}(aq)\rightarrow CuSO_{4}(aq)+Cu(s)}$, i.e. $2\mathrm{Cu^{+}(aq)\rightarrow Cu^{2+}(aq)+Cu(s)}$. This is a disproportionation: copper goes from +1 to +2 and to 0.
Check For (c), $$E^{\circ}_{cell}=E^{\circ}(\mathrm{Cu^{+}/Cu})-E^{\circ}(\mathrm{Cu^{2+}/Cu^{+}})=0.52-0.15=+0.37\ \mathrm{V}$$ which is positive, so the reaction is spontaneous ✓.
⚠️ JEE Main traps

1. Cr and Cu (and Pd). $\mathrm{Cr}=[\mathrm{Ar}]\,3d^{5}\,4s^{1}$, $\mathrm{Cu}=[\mathrm{Ar}]\,3d^{10}\,4s^{1}$, $\mathrm{Pd}=[\mathrm{Kr}]\,4d^{10}$. Their neighbours Mn and Zn follow the normal pattern. And ions lose 4s first: $\mathrm{Fe^{2+}}=[\mathrm{Ar}]\,3d^{6}$, never $3d^{4}\,4s^{2}$.

2. "Zn, Cd, Hg are transition elements." They are d-block elements but not transition elements; Sc and Cu are transition elements although $\mathrm{Sc^{3+}}$ is $d^{0}$ and Cu is $d^{10}$ in the atom.

3. Which ionisation enthalpy is anomalous? The second is high for Cr and Cu ($\mathrm{M^{+}}$ is $d^{5}$, $d^{10}$); the third is high for Mn and Zn ($\mathrm{M^{2+}}$ is $d^{5}$, $d^{10}$) and low for Fe. Shift the index by one and the answer changes.

4. Highest state. Maximum oxidation state = group number only up to Mn (+7). Fe is not +8 (its usual maximum is +3, rarely +6), and the highest fluoride is lower than the highest oxide (MnF4 vs Mn2O7; CrF5 vs CrO3).

5. Electrode potentials. Only Cu has positive $E^{\circ}(\mathrm{M^{2+}/M})$ in the first row. $\mathrm{Mn^{3+}}$ and $\mathrm{Co^{3+}}$ are oxidants, $\mathrm{Cr^{2+}}$ a reductant; $\mathrm{Cu^{+}(aq)}$ disproportionates although it is $d^{10}$ — hydration enthalpy, not configuration, wins in water.

Which ion is the strongest reducing agent in aqueous solution?

Exercises

Use the data tables of this section where needed. All configurations are ground-state configurations; "unpaired electrons" for ions means the free ion (as in the aqueous ions of this section).

I
Position and electronic configuration.
  • 1 Write the configurations of V ($Z=23$), Mn ($Z=25$), Co ($Z=27$) and Ni ($Z=28$), and state the number of unpaired electrons in each atom.
  • 2 Write the configurations of $\mathrm{Ti^{3+}}$, $\mathrm{V^{2+}}$, $\mathrm{Mn^{3+}}$ and $\mathrm{Co^{2+}}$, and the number of d electrons in each.
  • 3 How many unpaired electrons does $\mathrm{Fe^{2+}}$ have, and how many does $\mathrm{Fe^{3+}}$ have?
  • 4 Find the total number of electrons with $l=2$ in a ground-state copper atom.
  • 5 Which of the following are transition elements by the definition in this section: Sc, Ti, Cu, Zn, Cd, Ag? Give a reason for each one you exclude.
  • 6 A first-row metal ion $\mathrm{M^{3+}}$ has the configuration $[\mathrm{Ar}]\,3d^{5}$. Identify the metal and write the configuration of its neutral atom.
  • 7 Write the configurations of Pd ($Z=46$) and Pt ($Z=78$, $[\mathrm{Xe}]\,4f^{14}$ core) and say how each departs from the simple $(n-1)d^{x}\,ns^{2}$ pattern.
  • 8 Name one ore each in which titanium, chromium and manganese occur, with its formula, and explain why copper and gold can be found native.
1 V $[\mathrm{Ar}]\,3d^{3}\,4s^{2}$ (3 unpaired); Mn $[\mathrm{Ar}]\,3d^{5}\,4s^{2}$ (5); Co $[\mathrm{Ar}]\,3d^{7}\,4s^{2}$ (3); Ni $[\mathrm{Ar}]\,3d^{8}\,4s^{2}$ (2).
2 $\mathrm{Ti^{3+}}=[\mathrm{Ar}]\,3d^{1}$ (1); $\mathrm{V^{2+}}=[\mathrm{Ar}]\,3d^{3}$ (3); $\mathrm{Mn^{3+}}=[\mathrm{Ar}]\,3d^{4}$ (4); $\mathrm{Co^{2+}}=[\mathrm{Ar}]\,3d^{7}$ (7).
3 $\mathrm{Fe^{2+}}=3d^{6}$: 4 unpaired; $\mathrm{Fe^{3+}}=3d^{5}$: 5 unpaired.
4 $l=2$ means d electrons; Cu has $3d^{10}$ and no other d electrons: 10.
5 Transition elements: Sc ($3d^{1}$ atom), Ti, Cu ($\mathrm{Cu^{2+}}$ is $d^{9}$), Ag (in $\mathrm{AgF_{2}}$, $4d^{9}$). Excluded: Zn and Cd — $d^{10}$ both in the atom and in their only common ion $\mathrm{M^{2+}}$.
6 Group $=5+3=8$: iron ($Z=26$), $[\mathrm{Ar}]\,3d^{6}\,4s^{2}$.
7 Pd $[\mathrm{Kr}]\,4d^{10}\,5s^{0}$ — both 5s electrons have moved into 4d (completely filled d subshell). Pt $[\mathrm{Xe}]\,4f^{14}\,5d^{9}\,6s^{1}$ — one 6s electron in 5d.
8 Ti: ilmenite $\mathrm{FeTiO_{3}}$ (or rutile $\mathrm{TiO_{2}}$); Cr: chromite $\mathrm{FeCr_{2}O_{4}}$; Mn: pyrolusite $\mathrm{MnO_{2}}$. Cu and Au have positive electrode potentials and high atomisation enthalpies, so their compounds are not much more stable than the metals and the metals survive uncombined.
II
Radii, metallic bonding, melting points and density.
  • 1 Why do metallic radii decrease only slightly across the first transition series, compared with the decrease across Na → Cl?
  • 2 Arrange $\mathrm{Fe^{2+}}$, $\mathrm{Fe^{3+}}$ and Fe in order of decreasing radius and explain.
  • 3 Which first-row metal has the highest enthalpy of atomisation and which the lowest? By how many $\mathrm{kJ\,mol^{-1}}$ do they differ?
  • 4 How many unpaired d electrons are there in the atoms of V, Mn and Zn? Use the answer to explain the order of their enthalpies of atomisation, and say why Mn does not fit the "more unpaired electrons, stronger bonding" rule.
  • 5 Zr and Hf have almost the same atomic radius (160 and 159 pm), whereas Ti is 147 pm. Explain.
  • 6 Which first-row metal is the densest? Explain why density rises from Sc to Cu.
  • 7 By what percentage does the metallic radius decrease from Sc (164 pm) to Cr (129 pm)?
  • 8 Explain why the 4d and 5d transition metals form metal–metal bonds in their compounds much more often than the 3d metals.
1 Across Na → Cl each electron enters the outer shell, which shields the other outer electrons poorly, so $Z_{eff}$ climbs fast. In the transition series the added electron enters the inner 3d subshell and partly shields the outer 4s electrons from the extra proton, so $Z_{eff}$ on the outer electrons rises only slowly.
2 $\mathrm{Fe}\gt\mathrm{Fe^{2+}}\gt\mathrm{Fe^{3+}}$ (126 pm metallic, about 78 and 65 pm ionic). Losing electrons removes the outer shell (4s) and then reduces electron–electron repulsion while the nuclear charge stays 26.
3 Highest V ($515$), lowest Zn ($126$): difference $515-126=389\ \mathrm{kJ\,mol^{-1}}$.
4 V 3, Mn 5, Zn 0. Zn (no unpaired d) bonds weakest. Mn has the most unpaired d electrons, but its half-filled $3d^{5}$ is a stable, tightly held set that contributes little to bonding, so $\Delta_{a}H^{\circ}$: $\mathrm{Zn}\ (126)\lt\mathrm{Mn}\ (281)\lt\mathrm{V}\ (515)$.
5 Between Zr (4d) and Hf (5d) come the 14 lanthanoids, filling 4f. The 4f electrons shield the nucleus poorly, so the radius shrinks steadily through the lanthanoids (lanthanoid contraction) and Hf ends up almost exactly the size of Zr; the difference is only $1\ \mathrm{pm}$.
6 Cu ($8.96\ \mathrm{g\,cm^{-3}}$). Atomic mass increases along the row while the metallic radius decreases or stays about constant, so mass per unit volume rises.
7 $\dfrac{164-129}{164}\times100=21.3\,\%$.
8 The 4d and 5d orbitals are larger and more diffuse and overlap better with those of a neighbouring metal atom; their enthalpies of atomisation are higher, so M–M bonds are strong enough to persist in compounds.
III
Ionisation enthalpies and oxidation states.
  • 1 Explain why $\Delta_{i}H_{2}$ of Cr (1592) is greater than that of Mn (1509) $\mathrm{kJ\,mol^{-1}}$.
  • 2 Using the table, find $\Delta_{i}H_{1}+\Delta_{i}H_{2}+\Delta_{i}H_{3}$ for Fe, in $\mathrm{kJ\,mol^{-1}}$.
  • 3 Which element of the first series has the highest third ionisation enthalpy? Explain.
  • 4 Find the oxidation state of the metal in $\mathrm{VO_{2}^{+}}$, $\mathrm{CrO_{2}Cl_{2}}$, $\mathrm{MnO_{4}^{-}}$ and $\mathrm{[Co(NH_{3})_{6}]^{3+}}$ ($\mathrm{NH_{3}}$ is neutral).
  • 5 How many d electrons does the metal have in each species of part 4? Which have $d^{0}$ metal centres?
  • 6 Why does scandium show only the +3 state, while manganese shows every state from +2 to +7?
  • 7 Why is the highest oxidation state of iron (+6, rare) far below its group number (8)?
  • 8 Classify $\mathrm{MnO}$, $\mathrm{MnO_{2}}$, $\mathrm{Mn_{2}O_{7}}$, $\mathrm{Cr_{2}O_{3}}$ and $\mathrm{CrO_{3}}$ as acidic, basic or amphoteric, and state the rule.
  • 9 Explain why $\mathrm{VF_{5}}$ exists but the highest chloride of vanadium is $\mathrm{VCl_{4}}$.
1 $\mathrm{Cr^{+}}=3d^{5}$: the second electron must come out of a half-filled subshell. $\mathrm{Mn^{+}}=3d^{5}\,4s^{1}$: the second electron is the 4s electron, and $\mathrm{Mn^{2+}}$ keeps $3d^{5}$.
2 $762+1561+2962=5285\ \mathrm{kJ\,mol^{-1}}$.
3 Zn ($3837$): the third electron would come from the completely filled $3d^{10}$ of $\mathrm{Zn^{2+}}$. (Among the transition elements proper, Cu at $3556$ is highest; $\mathrm{Cu^{2+}}$ is $d^{9}$, and the nuclear charge is high.)
4 $\mathrm{VO_{2}^{+}}$: $x-4=+1$, $x=+5$. $\mathrm{CrO_{2}Cl_{2}}$: $x-4-2=0$, $x=+6$. $\mathrm{MnO_{4}^{-}}$: $+7$. $\mathrm{[Co(NH_{3})_{6}]^{3+}}$: $+3$.
5 V(V): $5-5=0$; Cr(VI): $6-6=0$; Mn(VII): $7-7=0$; Co(III): $9-3=6$. Three species ($\mathrm{VO_{2}^{+}}$, $\mathrm{CrO_{2}Cl_{2}}$, $\mathrm{MnO_{4}^{-}}$) are $d^{0}$.
6 Sc ($3d^{1}4s^{2}$) loses its three valence electrons to reach the noble-gas core $[\mathrm{Ar}]$; losing fewer leaves an unstable, reducing ion. Mn ($3d^{5}4s^{2}$) has seven valence electrons of similar energy, and states between 2 and 7 differ by modest amounts of energy, which can be paid by bonding to O or F.
7 After Mn the nuclear charge keeps rising and the 3d electrons are held more tightly; removing six or more of them costs more than any bond energy can repay. Iron settles at +2 and +3 ($d^{5}$).
8 MnO basic; $\mathrm{MnO_{2}}$ amphoteric; $\mathrm{Mn_{2}O_{7}}$ acidic; $\mathrm{Cr_{2}O_{3}}$ amphoteric; $\mathrm{CrO_{3}}$ acidic. Rule: for one metal, acidic character (and covalency) increases with oxidation state.
9 Fluorine is smaller and more electronegative than chlorine; five F atoms fit round V and the V–F bonds (or lattice) are strong enough to stabilise +5. Chloride is larger, more easily oxidised and gives weaker bonds, so +4 is the limit.
IV
Electrode potentials and mixed JEE-level problems.
  • 1 Which first-row metals will liberate hydrogen from $1\ \mathrm{M}$ HCl under standard conditions? Write the equation for nickel.
  • 2 Explain why $E^{\circ}(\mathrm{Mn^{2+}/Mn})$ is more negative than $E^{\circ}(\mathrm{Cr^{2+}/Cr})$ and $E^{\circ}(\mathrm{Fe^{2+}/Fe})$.
  • 3 Calculate $E^{\circ}_{cell}$ for $\mathrm{Zn(s)+Cu^{2+}(aq)\rightarrow Zn^{2+}(aq)+Cu(s)}$ from the table.
  • 4 Will $\mathrm{Fe^{3+}(aq)}$ oxidise $\mathrm{Cr^{2+}(aq)}$ under standard conditions? Find $E^{\circ}_{cell}$ and write the balanced equation.
  • 5 Explain why $\mathrm{Co^{3+}(aq)}$ is unstable in water while $\mathrm{Fe^{3+}(aq)}$ is stable, using $E^{\circ}$ values.
  • 6 Using $\Delta_{a}H^{\circ}=281$, $\Delta_{i}H_{1}=717$, $\Delta_{i}H_{2}=1509$ and $\Delta_{hyd}H(\mathrm{Mn^{2+}})=-1841\ \mathrm{kJ\,mol^{-1}}$, find $\Delta H$ for $\mathrm{Mn(s)\rightarrow Mn^{2+}(aq)}$ and compare it with copper's value from Example 5.
  • 7 $\mathrm{Mn^{3+}}$ and $\mathrm{Cr^{2+}}$ are both $d^{4}$. Why is one a strong oxidant and the other a strong reductant?
  • 8 For the disproportionation $2\mathrm{Cu^{+}(aq)\rightarrow Cu^{2+}(aq)+Cu(s)}$, $E^{\circ}_{cell}=+0.37\ \mathrm{V}$. Find $\log K$ at 298 K (use $E^{\circ}_{cell}=\tfrac{0.059}{n}\log K$).
1 All with negative $E^{\circ}(\mathrm{M^{2+}/M})$: Ti, V, Cr, Mn, Fe, Co, Ni, Zn (some slowly, because of oxide films); not Cu. $\mathrm{Ni(s)+2H^{+}(aq)\rightarrow Ni^{2+}(aq)+H_{2}(g)}$.
2 $\mathrm{Mn^{2+}}$ is $d^{5}$, a half-filled, extra-stable configuration, and manganese has a low atomisation enthalpy (281); both make $\mathrm{Mn\rightarrow Mn^{2+}}$ easier, so its $E^{\circ}$ (−1.18 V) is more negative than Cr's (−0.91 V) and Fe's (−0.44 V).
3 $E^{\circ}_{cell}=E^{\circ}_{cathode}-E^{\circ}_{anode}=0.34-(-0.76)=+1.10\ \mathrm{V}$.
4 Cathode $\mathrm{Fe^{3+}/Fe^{2+}}$ (+0.77), anode $\mathrm{Cr^{3+}/Cr^{2+}}$ (−0.41): $E^{\circ}_{cell}=0.77+0.41=+1.18\ \mathrm{V}\gt0$ — yes. $\mathrm{Fe^{3+}(aq)+Cr^{2+}(aq)\rightarrow Fe^{2+}(aq)+Cr^{3+}(aq)}$.
5 $E^{\circ}(\mathrm{Co^{3+}/Co^{2+}})=+1.97\ \mathrm{V}$ is above $E^{\circ}(\mathrm{O_{2}/H_{2}O})=+1.23\ \mathrm{V}$, so $\mathrm{Co^{3+}}$ oxidises water to $\mathrm{O_{2}}$ and becomes $\mathrm{Co^{2+}}$. $E^{\circ}(\mathrm{Fe^{3+}/Fe^{2+}})=+0.77\ \mathrm{V}$ is below $1.23\ \mathrm{V}$, so $\mathrm{Fe^{3+}}$ cannot oxidise water.
6 $281+717+1509-1841=666\ \mathrm{kJ\,mol^{-1}}$, much less than copper's $942$: forming $\mathrm{Mn^{2+}(aq)}$ is far easier, matching $E^{\circ}=-1.18\ \mathrm{V}$ against $+0.34\ \mathrm{V}$.
7 Cr(II) → Cr(III) reaches $d^{3}$, which is stable in water (half-filled $t_{2g}$), so $\mathrm{Cr^{2+}}$ gives up an electron readily. Mn(III) → Mn(II) reaches $d^{5}$, so $\mathrm{Mn^{3+}}$ takes an electron readily.
8 $n=1$: $\log K=\dfrac{0.37}{0.059}=6.27$ ($K\approx1.9\times10^{6}$) — the disproportionation goes essentially to completion.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ Among V, Cr, Mn and Fe, the element with the highest third ionisation enthalpy is (A) V (B) Mn (C) Cr (D) Fe

Idea The third electron comes from $\mathrm{M^{2+}}$: $\mathrm{V^{2+}}\ 3d^{3}$, $\mathrm{Cr^{2+}}\ 3d^{4}$, $\mathrm{Mn^{2+}}\ 3d^{5}$, $\mathrm{Fe^{2+}}\ 3d^{6}$.
Reason Only for Mn does the third ionisation break a half-filled subshell; for Fe it creates one. Data: V 2833, Cr 2990, Mn 3260, Fe 2962 $\mathrm{kJ\,mol^{-1}}$.
Answer (B) Mn.
⏱ Shortcut "Which $\Delta_{i}H_{k}$ is high?" — find the ion $\mathrm{M^{(k-1)+}}$; if it is $d^{5}$ or $d^{10}$, that is the spike.

E2. JEE Main · Numerical Find the total number of unpaired electrons in a ground-state Cr atom ($Z=24$), a ground-state Cu atom ($Z=29$) and an $\mathrm{Fe^{3+}}$ ion ($Z=26$) taken together. Give the answer to the nearest integer.

Cr $[\mathrm{Ar}]\,3d^{5}\,4s^{1}$: 6 unpaired.
Cu, Fe³⁺ Cu $[\mathrm{Ar}]\,3d^{10}\,4s^{1}$: 1. $\mathrm{Fe^{3+}}$ $[\mathrm{Ar}]\,3d^{5}$: 5.
Answer $6+1+5=12$.
⏱ Shortcut Writing $3d^{4}4s^{2}$ for Cr gives 4 and the wrong total 10 — the exceptions are exactly what this question tests.

E3. JEE Main · MCQ Copper is the only first-row transition metal with a positive $E^{\circ}(\mathrm{M^{2+}/M})$. This is because (A) $\mathrm{Cu^{2+}}$ has the most negative hydration enthalpy of the series (B) copper has the lowest enthalpy of atomisation of the series (C) the high enthalpy of atomisation and ionisation enthalpies of copper are not balanced by the hydration enthalpy of $\mathrm{Cu^{2+}}$ (D) $\mathrm{Cu^{2+}}$ has a completely filled d subshell

Cycle $\Delta H=\Delta_{a}H^{\circ}+\Delta_{i}H_{1}+\Delta_{i}H_{2}+\Delta_{hyd}H$; for Cu about $339+2703-2100=942\ \mathrm{kJ\,mol^{-1}}$, the largest in the row.
Eliminate (A) a very negative hydration enthalpy would make $E^{\circ}$ more negative; (B) Zn has the lowest $\Delta_{a}H^{\circ}$; (D) $\mathrm{Cu^{2+}}$ is $d^{9}$.
Answer (C).

E4. JEE Main · Numerical In how many of the following species does the transition metal have a $d^{0}$ configuration? $\mathrm{TiO_{2}}$, $\mathrm{VO^{2+}}$, $\mathrm{CrO_{4}^{2-}}$, $\mathrm{MnO_{4}^{-}}$, $\mathrm{MnO_{4}^{2-}}$, $\mathrm{Sc^{3+}}$, $\mathrm{Cu^{+}}$, $\mathrm{Fe^{3+}}$. Give the answer to the nearest integer.

States Ti +4, V +4, Cr +6, Mn +7, Mn +6, Sc +3, Cu +1, Fe +3.
d count group − state: Ti $4-4=0$; V $5-4=1$; Cr $6-6=0$; Mn $7-7=0$; Mn $7-6=1$; Sc $3-3=0$; Cu $11-1=10$; Fe $8-3=5$.
Answer $4$ ($\mathrm{TiO_{2}}$, $\mathrm{CrO_{4}^{2-}}$, $\mathrm{MnO_{4}^{-}}$, $\mathrm{Sc^{3+}}$).

E5. JEE Main · MCQ Which statement is incorrect? (A) The highest oxidation state of manganese with fluorine is +4, but with oxygen +7. (B) $\mathrm{Cr^{2+}}$ is a reducing agent while $\mathrm{Mn^{3+}}$ is an oxidising agent, though both are $d^{4}$. (C) The melting point of manganese is lower than those of chromium and iron. (D) The maximum oxidation state shown by the first-row elements keeps rising from Sc to Zn.

Check (A) true ($\mathrm{MnF_{4}}$, $\mathrm{Mn_{2}O_{7}}$). (B) true ($\mathrm{Cr^{3+}}$ $d^{3}$ and $\mathrm{Mn^{2+}}$ $d^{5}$ are the stable products). (C) true (Mn 1519 K, Cr 2180 K, Fe 1811 K).
(D) The maximum state rises to +7 at Mn and then falls (Fe +6 rarely, Co and Ni +4, Cu +2, Zn +2). False.
Answer (D).

E6. JEE Main · Numerical For zinc, $\Delta_{a}H^{\circ}=126$, $\Delta_{i}H_{1}=906$, $\Delta_{i}H_{2}=1734$ and $\Delta_{hyd}H(\mathrm{Zn^{2+}})=-2046$, all in $\mathrm{kJ\,mol^{-1}}$. Find the enthalpy change, in $\mathrm{kJ\,mol^{-1}}$, for $\mathrm{Zn(s)\rightarrow Zn^{2+}(aq)}$ by the enthalpy cycle of this section. Give the answer to the nearest integer.

Cycle $\Delta H=\Delta_{a}H^{\circ}+\Delta_{i}H_{1}+\Delta_{i}H_{2}+\Delta_{hyd}H$.
Number $126+906+1734-2046=720\ \mathrm{kJ\,mol^{-1}}$.
Answer $720$.
⏱ Shortcut Add the positives ($2766$) and subtract $2046$. The small $\Delta_{a}H^{\circ}$ of zinc is why its value is lower than nickel's (813) and copper's (942).
🔬 Research–Teaching NexusResearch-tutored · optional, about 45 minutes

Research question. How well does the number of unpaired d electrons predict the strength of metallic bonding across the 3d, 4d and 5d series — and where does the simple rule fail?

Why it matters. Jet-engine turbine blades, drill bits, light-bulb filaments and fusion-reactor walls need metals that stay strong near their melting points. Materials engineers in aerospace and energy screen candidate alloys with exactly this kind of electron-counting argument before they run expensive experiments or computer simulations.

What to do.

  1. From an open periodic-table database, collect the enthalpy of atomisation and the melting point of all 30 d-block metals (3d, 4d, 5d series).
  2. Plot each property against the group number (3 to 12), one line per series. Mark the maximum of each series.
  3. Add a column for the number of unpaired d electrons in each atom and make a scatter plot of $\Delta_{a}H^{\circ}$ against it. Is the correlation good? Which points lie furthest from the trend (look at Mn, Tc and the group 12 metals)?
  4. Compare the three series group by group: by what average factor does $\Delta_{a}H^{\circ}$ grow from 3d to 5d? Relate your answer to the size of the d orbitals.

Tools: A spreadsheet, a reliable online data table (state which one you used), and the trend explorer of this section to check the first-row values.

Hand in: The two plots, a short table of the outliers with a one-line explanation for each, and three sentences on why tungsten (not iron) is used for filaments and rocket nozzles.

Going further. The melting point also depends on crystal structure. Find the structures (bcc, ccp, hcp) of the metals near each maximum. Do the highest-melting metals share a structure?

Instructor note: all three series peak around groups 5–6, the 4d and 5d curves lie well above the 3d curve (5d roughly 1.5–2 times the 3d values in the middle), and Mn/Tc and Zn/Cd/Hg are the clearest outliers. Students should notice that "unpaired electrons in the free atom" is only a proxy — in the metal the d electrons occupy bands, and a half-filled band (not a half-filled atomic subshell) gives the strongest bonding.

🧪 Self-check quiz

0/5 correct

Q1. The ground-state configuration of $\mathrm{Cu^{2+}}$ ($Z=29$) is

Q2. In the first transition series the enthalpy of atomisation is greatest for

Q3. The second ionisation enthalpies of Cr and Cu are unusually high because

Q4. Which species is a strong oxidising agent in aqueous solution?

Q5. The highest oxidation states of Ti, V, Cr and Mn in their oxides are