Chapter 12 · Coordination Compounds

12.3 Bonding: Valence Bond and Crystal Field Theory

Why is $\mathrm{[Ni(CN)_{4}]^{2-}}$ square planar and diamagnetic while $\mathrm{[NiCl_{4}]^{2-}}$ is tetrahedral and paramagnetic? Why is $\mathrm{[Ti(H_{2}O)_{6}]^{3+}}$ purple and $\mathrm{[Zn(H_{2}O)_{6}]^{2+}}$ colourless? Valence bond theory explains shapes and magnetism through hybridisation; crystal field theory splits the $d$ orbitals and explains spin, stability and colour.

Dissolve nickel(II) chloride in water and you get a green solution. Add excess ammonia and it turns blue-violet; add cyanide instead and it becomes yellow, and a magnet that slightly attracted the original salt now has no effect at all. Cobalt(III) with ammonia gives orange-yellow crystals that are repelled by a magnet; cobalt(III) with fluoride gives a blue salt that is strongly attracted. The metal ion is the same in each pair — only the ligands differ. Werner's theory (Section 12.1) tells us how many ligands surround the metal and how they are named and arranged (Section 12.2), but it says nothing about why the bonds form, why a four-coordinate complex is sometimes tetrahedral and sometimes square planar, or where the colours and the magnetism come from.

Two models answer these questions. Valence bond theory (VBT) extends the hybridisation idea of Section 3.3: each ligand donates a lone pair into an empty hybrid orbital of the metal, and the type of hybrid fixes the geometry and the number of unpaired electrons. Crystal field theory (CFT) takes a different view: the ligands are negative charges that raise the energy of some $d$ orbitals more than others. The resulting gap, $\Delta_{o}$, decides whether electrons pair up, how much extra stability the complex gains, and which colour of light it absorbs. JEE Main tests both models every year — almost always as a count: unpaired electrons, spin-only magnetic moment, CFSE in units of $\Delta_{o}$, or $d$ electrons on the metal.

Valence bond theory of complexes

A ligand is a Lewis base with at least one lone pair; a metal ion is a Lewis acid with empty orbitals. In VBT the metal–ligand bond is a coordinate (dative) σ bond: an orbital of the ligand holding a lone pair overlaps an empty orbital of the metal, and both electrons come from the ligand. To make a set of equivalent bonds pointing in definite directions, the metal first mixes the required number of its empty orbitals into hybrids, exactly as carbon does in methane.

📘 Definition 12.10 — Valence bond theory of coordination compounds

According to valence bond theory applied to complexes (Pauling, 1931):

  1. The central metal atom or ion makes available a number of empty orbitals equal to its coordination number.
  2. These empty orbitals — chosen from $(n-1)d$, $ns$, $np$ and $nd$ — hybridise to give a set of equivalent hybrid orbitals of definite directions.
  3. Each ligand donates a lone pair into one hybrid orbital, forming a coordinate σ bond ($\mathrm{M\leftarrow L}$).
  4. The type of hybridisation fixes the geometry of the complex.
  5. Electrons already on the metal stay in its non-hybridised $d$ orbitals. Some ligands (strong-field ligands) force these electrons to pair up so that inner $d$ orbitals become free for hybridisation; others do not. The number of unpaired electrons left decides the magnetic behaviour.
📐 Rule 12.8 — Hybridisation and geometry of complexes
Coordination numberOrbitals usedHybridisationGeometryExamples
2$ns,\ np$$sp$linear$\mathrm{[Ag(NH_{3})_{2}]^{+}}$, $\mathrm{[Ag(CN)_{2}]^{-}}$
4$ns,\ np_{x},np_{y},np_{z}$$sp^{3}$tetrahedral$\mathrm{[NiCl_{4}]^{2-}}$, $\mathrm{[Zn(NH_{3})_{4}]^{2+}}$, $\mathrm{[Ni(CO)_{4}]}$
4$(n-1)d_{x^{2}-y^{2}},\ ns,\ np_{x},np_{y}$$dsp^{2}$square planar$\mathrm{[Ni(CN)_{4}]^{2-}}$, $\mathrm{[PtCl_{4}]^{2-}}$
5$(n-1)d_{z^{2}},\ ns,\ np$$dsp^{3}$trigonal bipyramidal$\mathrm{[Fe(CO)_{5}]}$
6$(n-1)d_{x^{2}-y^{2}},(n-1)d_{z^{2}},\ ns,\ np$$d^{2}sp^{3}$octahedral (inner orbital)$\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[Fe(CN)_{6}]^{4-}}$
6$ns,\ np,\ nd_{x^{2}-y^{2}},nd_{z^{2}}$$sp^{3}d^{2}$octahedral (outer orbital)$\mathrm{[CoF_{6}]^{3-}}$, $\mathrm{[Fe(H_{2}O)_{6}]^{2+}}$

The $d$ orbitals chosen are always those whose lobes point along the bond directions: $d_{x^{2}-y^{2}}$ for the four bonds in the $xy$ plane of a square planar complex, and both $d_{x^{2}-y^{2}}$ and $d_{z^{2}}$ for the six bonds along $\pm x$, $\pm y$, $\pm z$ of an octahedron. Writing $d$ first ($d^{2}sp^{3}$, $dsp^{2}$) signals inner $(n-1)d$ orbitals; writing it last ($sp^{3}d^{2}$) signals outer $nd$ orbitals.

📘 Definition 12.11 — Inner-orbital and outer-orbital complexes

An octahedral complex that uses the inner $(n-1)d$ orbitals ($d^{2}sp^{3}$) is an inner-orbital complex. Its $d$ electrons are squeezed into the remaining three $(n-1)d$ orbitals, so it has the fewest possible unpaired electrons: a low-spin (spin-paired) complex.

An octahedral complex that uses the outer $nd$ orbitals ($sp^{3}d^{2}$) is an outer-orbital complex. All five $(n-1)d$ orbitals stay available to the metal's own electrons, which spread out by Hund's rule: a high-spin (spin-free) complex. Outer $nd$ orbitals are larger and higher in energy, so outer-orbital bonds are longer and weaker, and these complexes are usually more labile (exchange ligands faster).

Which way does a given complex go? Strong-field ligands such as $\mathrm{CN^{-}}$, $\mathrm{CO}$, $\mathrm{NO_{2}^{-}}$ and ethane-1,2-diamine (en) — and $\mathrm{NH_{3}}$ or even $\mathrm{H_{2}O}$ with the small, highly charged $\mathrm{Co^{3+}}$ — push the metal's electrons into pairs to vacate two inner $d$ orbitals. Weak-field ligands such as $\mathrm{F^{-}}$, $\mathrm{Cl^{-}}$, $\mathrm{Br^{-}}$, $\mathrm{I^{-}}$ and usually $\mathrm{H_{2}O}$ cannot. In VBT this is an experimental input: we learn which happened from the measured magnetic moment, and the theory then tells us the hybridisation. Some ions have no choice: $d^{1}$, $d^{2}$ and $d^{3}$ ions always have two empty inner $d$ orbitals ($d^{2}sp^{3}$), while $d^{8}$, $d^{9}$ and $d^{10}$ ions in octahedral complexes cannot free two of them and are always $sp^{3}d^{2}$.

Magnetism is the link to experiment. A substance with unpaired electrons is paramagnetic — drawn into a magnetic field — because each unpaired electron behaves as a tiny magnet. With all electrons paired it is diamagnetic and weakly pushed out. The size of the effect is measured with a Gouy or Faraday balance (the sample appears heavier when the magnet is switched on) and expressed as the magnetic moment $\mu$ in Bohr magnetons (BM), $1\ \mathrm{BM}=\dfrac{eh}{4\pi m_{e}}=9.27\times10^{-24}\ \mathrm{J\,T^{-1}}$.

📐 Rule 12.9 — Spin-only magnetic moment

For a complex with $n$ unpaired electrons, if the contribution of orbital motion is neglected (it is largely "quenched" by the ligands in complexes of the first transition series),

$$\mu_{s}=\sqrt{n(n+2)}\ \ \mathrm{BM}.$$
$n$012345
$\mu_{s}$ (BM)0$\sqrt3=1.73$$\sqrt8=2.83$$\sqrt{15}=3.87$$\sqrt{24}=4.90$$\sqrt{35}=5.92$

Read backwards: a measured moment fixes $n$ — take the nearest value in the table (measured values are often a little above the spin-only value because some orbital contribution survives).

🧭 Problem-solving strategy — VBT description of a complex
  1. Oxidation state of the metal from the charge balance (ligand charges: $\mathrm{CN^{-}},\mathrm{Cl^{-}},\mathrm{F^{-}}$ −1; $\mathrm{C_{2}O_{4}^{2-}}$ −2; $\mathrm{H_{2}O},\mathrm{NH_{3}},\mathrm{CO}$, en 0).
  2. $d$ count: electrons lost come from $ns$ first, so $\mathrm{M^{x+}}$ of a 3d metal has $(\text{group number}-x)$ $d$ electrons ($\mathrm{Fe^{3+}}$: $8-3=5$).
  3. Pairing? Strong-field ligand (or a measured low moment) → pair the $d$ electrons as far as needed; weak-field ligand → Hund's rule.
  4. Count the empty orbitals needed (= coordination number), lowest energy first, and name the hybridisation and geometry from Rule 12.8.
  5. Unpaired electrons left in the non-hybridised $d$ orbitals → $\mu_{s}=\sqrt{n(n+2)}$.
✏️ Example 1 — Two nickel(II) complexes
$\mathrm{[Ni(CN)_{4}]^{2-}}$ is diamagnetic, while $\mathrm{[NiCl_{4}]^{2-}}$ is paramagnetic. Use valence bond theory to find, for each, (a) the hybridisation and geometry and (b) the number of unpaired electrons and the spin-only magnetic moment. (c) Explain the difference.
Find the spin-only magnetic moment of $\mathrm{[NiCl_{4}]^{2-}}$ before you open the solution:
Metal ion In both, $x+4(-1)=-2$ gives $\mathrm{Ni^{2+}}$. $\mathrm{Ni}$: $\mathrm{[Ar]\,3d^{8}\,4s^{2}}$, so $\mathrm{Ni^{2+}}$: $\mathrm{[Ar]\,3d^{8}}$ — by Hund's rule three paired and two unpaired $3d$ electrons.
(a) Cyanide $\mathrm{CN^{-}}$ is a strong-field ligand: the two unpaired electrons pair up, leaving one $3d$ orbital ($d_{x^{2}-y^{2}}$) empty. With $4s$ and two $4p$ orbitals it gives $dsp^{2}$ hybrids: square planar. Chloride, weak-field, leaves $3d^{8}$ unchanged; the four empty orbitals are $4s+3\times4p$: $sp^{3}$, tetrahedral.
(b) Magnetism $\mathrm{[Ni(CN)_{4}]^{2-}}$: all eight $3d$ electrons paired, $n=0$, $\mu=0$, diamagnetic ✓. $\mathrm{[NiCl_{4}]^{2-}}$: $n=2$, $\mu_{s}=\sqrt{2\times4}=\sqrt8=2.83\ \mathrm{BM}$.
(c) Reason The geometry is decided by whether a $3d$ orbital can be vacated. Strong-field cyanide pays the cost of pairing and gains the stronger inner-orbital bonds; chloride is not strong enough, so the metal must use $4s4p^{3}$.
Check For a $d^{8}$ ion, four-coordinate: diamagnetic ⇔ square planar; two unpaired ⇔ tetrahedral. JEE uses this pair constantly; $\mathrm{[PtCl_{4}]^{2-}}$ and $\mathrm{[Ni(dmg)_{2}]}$ are square planar and diamagnetic too.
✏️ Example 2 — From the measured moment to the hybridisation
Three octahedral iron complexes have measured magnetic moments: $\mathrm{K_{4}[Fe(CN)_{6}]}$ $0\ \mathrm{BM}$; $\mathrm{[Fe(H_{2}O)_{6}]SO_{4}}$ about $5.1\ \mathrm{BM}$; $\mathrm{K_{3}[Fe(CN)_{6}]}$ about $2.3\ \mathrm{BM}$. For each complex ion find the number of unpaired electrons, the hybridisation, and whether it is an inner- or outer-orbital complex.
Ions $\mathrm{[Fe(CN)_{6}]^{4-}}$: $x-6=-4$, $\mathrm{Fe^{2+}}$, $3d^{6}$. $\mathrm{[Fe(H_{2}O)_{6}]^{2+}}$: $\mathrm{Fe^{2+}}$, $3d^{6}$. $\mathrm{[Fe(CN)_{6}]^{3-}}$: $x-6=-3$, $\mathrm{Fe^{3+}}$, $3d^{5}$.
$\mathrm{[Fe(CN)_{6}]^{4-}}$ $\mu=0$ → $n=0$: all six $3d$ electrons paired in three $3d$ orbitals; two $3d$ empty → $d^{2}sp^{3}$, inner orbital, low spin.
$\mathrm{[Fe(H_{2}O)_{6}]^{2+}}$ $5.1\ \mathrm{BM}$ is nearest $4.90$ → $n=4$: $3d^{6}$ with Hund's rule (one pair, four single). No $3d$ orbital free → $sp^{3}d^{2}$, outer orbital, high spin.
$\mathrm{[Fe(CN)_{6}]^{3-}}$ $2.3\ \mathrm{BM}$ is nearest $1.73$ (not $2.83$, which would need an impossible two unpaired electrons from $d^{5}$ in three orbitals) → $n=1$: $3d^{5}$ packed as $\uparrow\downarrow\ \uparrow\downarrow\ \uparrow$ in three orbitals, two $3d$ empty → $d^{2}sp^{3}$, inner orbital.
Note The value $2.3\ \mathrm{BM}$ exceeds $1.73$ because some orbital motion survives in $\mathrm{[Fe(CN)_{6}]^{3-}}$. Always choose the integer $n$ whose spin-only value is closest and is possible for the $d$ count.

What VBT cannot do. Valence bond theory gives a simple, pictorial account of geometry and magnetism, but it has serious gaps:

The widget below builds the VBT orbital-box picture for a dozen complexes, step by step.

In the VBT builder choose $\mathrm{[Fe(CN)_{6}]^{3-}}$ (cyanide is a strong-field ligand). What will the readouts show for the hybridisation and the unpaired electrons?

Choose $\mathrm{[Fe(CN)_{6}]^{3-}}$ and read: oxidation state · d electrons +3 · 3d⁵, hybridisation d²sp³, geometry octahedral, orbital type inner orbital (3d used), unpaired · μ 1 · 1.73 BM. Step 3 of the animation shows the five $3d$ electrons pushed into three orbitals ($\uparrow\downarrow\ \uparrow\downarrow\ \uparrow$), so two $3d$ orbitals are free for the six cyanide pairs. An odd number of electrons can never all be paired, so "diamagnetic" is impossible for $d^{5}$. Now compare $\mathrm{[Fe(H_{2}O)_{6}]^{2+}}$: sp³d², outer orbital, 4 · 4.90 BM.
Interactive 1 — VBT Builder: From Metal Atom to Complex

Pick a complex and press Play (or Next step). The orbital boxes go through five stages: metal atom → metal ion ($ns$ electrons removed first) → effect of the ligands (pairing or promotion, if any) → hybridisation (purple boxes) → bonding (red pairs are ligand lone pairs). The picture at the bottom right shows the resulting shape.

oxidation state · d electrons—
hybridisation—
geometry—
orbital type—
unpaired · μ—

$\mathrm{[Ni(NH_{3})_{6}]^{2+}}$ is octahedral. According to VBT it is

Crystal field theory: splitting of the d orbitals

Crystal field theory (Bethe and Van Vleck, 1929–35) treats the metal–ligand bond as purely electrostatic. Anionic ligands are point negative charges; neutral ligands such as $\mathrm{H_{2}O}$ and $\mathrm{NH_{3}}$ are point dipoles with their negative end (the lone pair) towards the metal. In a free gaseous ion all five $d$ orbitals have the same energy (they are degenerate). If the ion were surrounded by a spherical shell of negative charge, all five would be raised by the same amount. But real ligands sit in definite directions, and an electron in an orbital pointing at a ligand is repelled more than one in an orbital pointing between ligands. The degeneracy is lifted.

📘 Definition 12.12 — Crystal field theory and crystal field splitting

Crystal field theory regards a complex as a central metal ion surrounded by ligands that act as point charges (or point dipoles), and considers only the electrostatic repulsion between the ligands and the metal's $d$ electrons. Because the ligands lie in definite directions, the five $d$ orbitals no longer have equal energies: they split into groups.

The energy gap between the groups is the crystal field splitting energy: $\Delta_{o}$ (or $10\,Dq$) for an octahedral field and $\Delta_{t}$ for a tetrahedral field. It is usually quoted in $\mathrm{kJ\,mol^{-1}}$ or in wavenumbers ($\mathrm{cm^{-1}}$; $1000\ \mathrm{cm^{-1}}=11.96\ \mathrm{kJ\,mol^{-1}}$).

Octahedral field. Place the six ligands on the $\pm x$, $\pm y$ and $\pm z$ axes. The $d_{x^{2}-y^{2}}$ and $d_{z^{2}}$ orbitals have their lobes along the axes, so their electrons meet the ligands head-on and are raised in energy; this pair is called $e_{g}$. The $d_{xy}$, $d_{yz}$ and $d_{xz}$ orbitals point between the axes and are raised less; this trio is called $t_{2g}$. Relative to the energy the orbitals would have in a spherical field (the barycentre), the total energy is unchanged by the splitting: the two $e_{g}$ orbitals go up by $0.6\Delta_{o}$ and the three $t_{2g}$ orbitals go down by $0.4\Delta_{o}$, since $2(+0.6)+3(-0.4)=0$.

Tetrahedral field. The four ligands sit at alternate corners of a cube with the metal at its centre. Now no $d$ orbital points straight at a ligand, but $d_{xy}$, $d_{yz}$ and $d_{xz}$ (pointing to the midpoints of the cube's edges) come closer to the ligands than $d_{x^{2}-y^{2}}$ and $d_{z^{2}}$ (pointing to the face centres). The pattern is inverted: the three $t_{2}$ orbitals lie $0.4\Delta_{t}$ above the barycentre and the two $e$ orbitals $0.6\Delta_{t}$ below. (No subscript $g$: a tetrahedron has no centre of symmetry.)

📐 Rule 12.10 — Octahedral and tetrahedral splitting
  1. Octahedral: $e_{g}\ (d_{x^{2}-y^{2}},d_{z^{2}})$ at $+0.6\Delta_{o}$; $t_{2g}\ (d_{xy},d_{yz},d_{xz})$ at $-0.4\Delta_{o}$.
  2. Tetrahedral: $t_{2}\ (d_{xy},d_{yz},d_{xz})$ at $+0.4\Delta_{t}$; $e\ (d_{x^{2}-y^{2}},d_{z^{2}})$ at $-0.6\Delta_{t}$.
  3. For the same metal ion, the same ligands and the same metal–ligand distance, $$\Delta_{t}\approx\tfrac{4}{9}\,\Delta_{o}.$$ The splitting is smaller because there are only four ligands instead of six (a factor $\tfrac23$) and because no orbital points directly at a ligand (a further factor $\tfrac23$).
  4. The barycentre is preserved: the energy gained by electrons in the lower set is balanced by the energy lost by electrons in the upper set when all five orbitals are equally occupied ($d^{5}$ high spin and $d^{10}$ have no net gain).

The spectrochemical series. The size of $\Delta_{o}$ is measured from the absorption spectra of complexes (fourth subsection). Comparing complexes of one metal ion with different ligands gives an order of ligand field strength that is almost the same for every metal:

📐 Rule 12.11 — The spectrochemical series and other factors that fix Δ

1. Ligand. In order of increasing field strength (increasing $\Delta_{o}$):

$$\mathrm{I^{-}\lt Br^{-}\lt SCN^{-}\lt Cl^{-}\lt S^{2-}}$$ $$\mathrm{\lt F^{-}\lt OH^{-}\lt C_{2}O_{4}^{2-}\lt H_{2}O}$$ $$\mathrm{\lt NCS^{-}\lt edta^{4-}\lt NH_{3}}$$ $$\mathrm{\lt en\lt CN^{-}\lt CO}$$

(SCN⁻ bonded through S is weaker than NCS⁻ bonded through N.) Ligands to the left of $\mathrm{H_{2}O}$ are weak-field; $\mathrm{NH_{3}}$, en, $\mathrm{CN^{-}}$ and $\mathrm{CO}$ are strong-field.

2. Oxidation state of the metal. A higher charge pulls the ligands closer: $\Delta_{o}$ for $\mathrm{M^{3+}}$ is roughly one and a half to two times that for $\mathrm{M^{2+}}$ with the same ligands.

3. Row of the metal. $\Delta$ increases down a group, $3d\lt4d\lt5d$, by roughly 30–50% per step, because the larger $4d$ and $5d$ orbitals reach further towards the ligands. Complexes of $4d$ and $5d$ metals are therefore almost always low spin.

4. Geometry. $\Delta_{t}\approx\tfrac49\Delta_{o}$ (Rule 12.10).

The series is an experimental order, and here crystal field theory shows its own weakness: if the ligands were simply point charges, the anions $\mathrm{F^{-}}$ and $\mathrm{OH^{-}}$ should split the $d$ orbitals more than the neutral $\mathrm{NH_{3}}$, and neutral $\mathrm{CO}$ should be among the weakest — the opposite of what is observed. The real bonds have covalent character (and $\mathrm{CN^{-}}$ and $\mathrm{CO}$ accept metal $d$ electrons into empty π orbitals), which the purely electrostatic model ignores. CFT is nevertheless very successful in explaining magnetism, colour and stability once $\Delta$ is known.

✏️ Example 3 — Ranking splittings for chromium(III)
Consider $\mathrm{[Cr(NH_{3})_{6}]^{3+}}$, $\mathrm{[CrF_{6}]^{3-}}$, $\mathrm{[Cr(CN)_{6}]^{3-}}$ and $\mathrm{[Cr(H_{2}O)_{6}]^{3+}}$. (a) Arrange them in order of increasing $\Delta_{o}$. (b) Which absorbs light of the longest wavelength? (c) $\Delta_{o}$ for $\mathrm{[Cr(H_{2}O)_{6}]^{3+}}$ is $17\,400\ \mathrm{cm^{-1}}$. Convert it to $\mathrm{kJ\,mol^{-1}}$, and estimate $\Delta_{t}$ for a hypothetical tetrahedral aqua complex of $\mathrm{Cr^{3+}}$ with the same $\mathrm{Cr{-}O}$ distance.
(a) Same metal ion ($\mathrm{Cr^{3+}}$, $3d^{3}$), so only the ligand matters. Spectrochemical series: $\mathrm{F^{-}\lt H_{2}O\lt NH_{3}\lt CN^{-}}$, hence $\mathrm{[CrF_{6}]^{3-}}$ < $\mathrm{[Cr(H_{2}O)_{6}]^{3+}}$ < $\mathrm{[Cr(NH_{3})_{6}]^{3+}}$ < $\mathrm{[Cr(CN)_{6}]^{3-}}$.
(b) The energy absorbed is $\Delta_{o}=N_{A}hc/\lambda$, so the smallest splitting absorbs the longest wavelength: $\mathrm{[CrF_{6}]^{3-}}$.
(c) $E=N_{A}hc\,\tilde\nu=(6.022\times10^{23})(6.626\times10^{-34}\ \mathrm{J\,s})(2.998\times10^{10}\ \mathrm{cm\,s^{-1}})(17\,400\ \mathrm{cm^{-1}})=2.08\times10^{5}\ \mathrm{J\,mol^{-1}}=208\ \mathrm{kJ\,mol^{-1}}$. Then $\Delta_{t}\approx\tfrac49\times208=92.4\ \mathrm{kJ\,mol^{-1}}$ (or $7730\ \mathrm{cm^{-1}}$).
Check $\lambda=1/\tilde\nu=575\ \mathrm{nm}$ — yellow light absorbed, so the aqua ion should look violet, which it does.

In an octahedral complex, which $d$ orbitals are raised to the higher energy level?

High spin, low spin, CFSE and magnetism

Feed electrons one at a time into the split $d$ orbitals of an octahedral ion. The first three go singly into $t_{2g}$ (Hund's rule). The fourth faces a choice: it can enter $e_{g}$, climbing the gap $\Delta_{o}$ but staying unpaired, or it can pair with an electron in $t_{2g}$, avoiding the climb but paying the extra repulsion of two electrons in one orbital (and losing exchange energy). Whichever costs less wins.

📘 Definition 12.13 — Pairing energy; high-spin and low-spin complexes

The pairing energy $P$ is the energy needed to put a second electron, of opposite spin, into an orbital that already holds one. It is a property of the metal ion (typically $200$–$300\ \mathrm{kJ\,mol^{-1}}$ for $3d$ ions).

A high-spin (weak-field) complex has the largest possible number of unpaired electrons: electrons occupy the upper set before pairing. A low-spin (strong-field) complex has the smallest possible number: the lower set is filled completely before the upper set is used.

📐 Rule 12.12 — Choosing the spin state
  1. Octahedral, $d^{4}$ to $d^{7}$: if $\Delta_{o}\lt P$ the complex is high spin (configuration $t_{2g}^{3}e_{g}^{1}$, $t_{2g}^{3}e_{g}^{2}$, $t_{2g}^{4}e_{g}^{2}$, $t_{2g}^{5}e_{g}^{2}$); if $\Delta_{o}\gt P$ it is low spin ($t_{2g}^{4}$, $t_{2g}^{5}$, $t_{2g}^{6}$, $t_{2g}^{6}e_{g}^{1}$).
  2. Octahedral $d^{1}$–$d^{3}$ and $d^{8}$–$d^{10}$ have only one possible arrangement, so "high spin or low spin" does not arise.
  3. Tetrahedral complexes are practically always high spin: $\Delta_{t}\approx\tfrac49\Delta_{o}$ is almost always smaller than $P$.
  4. In practice: weak-field ligands ($\mathrm{I^{-}}\ldots\mathrm{H_{2}O}$) give high-spin $3d$ complexes; $\mathrm{CN^{-}}$, $\mathrm{CO}$, en give low spin; $\mathrm{NH_{3}}$ and $\mathrm{H_{2}O}$ give low spin with $\mathrm{Co^{3+}}$ (large $\Delta_{o}$ of a $3+$ ion, unusually small $P$ for $d^{6}$).

This is the crystal-field picture behind VBT's inner- and outer-orbital complexes: low spin corresponds to inner-orbital $d^{2}sp^{3}$, high spin to outer-orbital $sp^{3}d^{2}$ — but CFT can now predict the outcome by comparing two energies.

📘 Definition 12.14 — Crystal field stabilisation energy (CFSE)

The crystal field stabilisation energy is the net change in energy of the $d$ electrons caused by the splitting, measured from the barycentre. For an octahedral complex with configuration $t_{2g}^{x}e_{g}^{y}$,

$$\mathrm{CFSE}=(-0.4x+0.6y)\,\Delta_{o}\ \ [\,+\,mP\,],$$

and for a tetrahedral complex $e^{x}t_{2}^{y}$,

$$\mathrm{CFSE}=(-0.6x+0.4y)\,\Delta_{t}.$$

A negative CFSE means stabilisation. The optional term $mP$ counts the extra electron pairs ($m$) that the field has created compared with the free ion; it matters only when high-spin and low-spin arrangements are compared. In JEE questions "CFSE in units of $\Delta_{o}$" means the bracket alone, with pairing energy ignored unless the question asks for it.

$d^{n}$Octahedral high spinunpairedCFSE ($\Delta_{o}$)Octahedral low spinunpairedCFSE ($\Delta_{o}$)TetrahedralCFSE ($\Delta_{t}$)
$d^{1}$$t_{2g}^{1}$1$-0.4$same$e^{1}$$-0.6$
$d^{2}$$t_{2g}^{2}$2$-0.8$same$e^{2}$$-1.2$
$d^{3}$$t_{2g}^{3}$3$-1.2$same$e^{2}t_{2}^{1}$$-0.8$
$d^{4}$$t_{2g}^{3}e_{g}^{1}$4$-0.6$$t_{2g}^{4}$2$-1.6\ (+P)$$e^{2}t_{2}^{2}$$-0.4$
$d^{5}$$t_{2g}^{3}e_{g}^{2}$5$0$$t_{2g}^{5}$1$-2.0\ (+2P)$$e^{2}t_{2}^{3}$$0$
$d^{6}$$t_{2g}^{4}e_{g}^{2}$4$-0.4$$t_{2g}^{6}$0$-2.4\ (+2P)$$e^{3}t_{2}^{3}$$-0.6$
$d^{7}$$t_{2g}^{5}e_{g}^{2}$3$-0.8$$t_{2g}^{6}e_{g}^{1}$1$-1.8\ (+P)$$e^{4}t_{2}^{3}$$-1.2$
$d^{8}$$t_{2g}^{6}e_{g}^{2}$2$-1.2$same$e^{4}t_{2}^{4}$$-0.8$
$d^{9}$$t_{2g}^{6}e_{g}^{3}$1$-0.6$same$e^{4}t_{2}^{5}$$-0.4$
$d^{10}$$t_{2g}^{6}e_{g}^{4}$0$0$same$e^{4}t_{2}^{6}$$0$

Why the low-spin advantage is exactly $\Delta_{o}$ per pair. Going from high spin to low spin moves one electron from $e_{g}$ to $t_{2g}$ for each extra pair formed: the electron drops by $0.6\Delta_{o}+0.4\Delta_{o}=\Delta_{o}$ and the pairing costs $P$. So low spin wins exactly when $\Delta_{o}\gt P$ — the rule above. For $d^{6}$, for example, the low-spin arrangement is lower by $2(\Delta_{o}-P)$.

🧭 Problem-solving strategy — CFT description of a complex
  1. Find the oxidation state and the $d$ count, as for VBT.
  2. Decide the geometry (octahedral, tetrahedral) and, for octahedral $d^{4}$–$d^{7}$, the spin state: given numbers → compare $\Delta_{o}$ with $P$; otherwise use the spectrochemical series (and the $\mathrm{Co^{3+}}$, $4d/5d$ exceptions).
  3. Write the configuration ($t_{2g}^{x}e_{g}^{y}$ or $e^{x}t_{2}^{y}$) and count unpaired electrons → $\mu_{s}=\sqrt{n(n+2)}\ \mathrm{BM}$.
  4. CFSE $=(-0.4x+0.6y)\Delta_{o}$ or $(-0.6x+0.4y)\Delta_{t}$; add $mP$ only if asked.
✏️ Example 4 — Configurations and CFSE
Write the $d$-electron configuration, the number of unpaired electrons and the CFSE (in units of $\Delta_{o}$ or $\Delta_{t}$, pairing energy shown separately) for (a) $\mathrm{[Fe(H_{2}O)_{6}]^{2+}}$, (b) $\mathrm{[Fe(CN)_{6}]^{4-}}$, (c) $\mathrm{[Ni(H_{2}O)_{6}]^{2+}}$, (d) the tetrahedral $\mathrm{[CoCl_{4}]^{2-}}$.
Find the CFSE of $\mathrm{[Fe(CN)_{6}]^{4-}}$ in units of $\Delta_{o}$ (ignore $P$) before you open the solution:
(a) $\mathrm{Fe^{2+}}$, $d^{6}$, $\mathrm{H_{2}O}$ weak with $\mathrm{Fe^{2+}}$ → high spin $t_{2g}^{4}e_{g}^{2}$: 4 unpaired. CFSE $=4(-0.4)+2(0.6)=-0.4\Delta_{o}$.
(b) $\mathrm{Fe^{2+}}$, $d^{6}$, $\mathrm{CN^{-}}$ strong → low spin $t_{2g}^{6}$: 0 unpaired. CFSE $=6(-0.4)=-2.4\Delta_{o}$, with $+2P$: the free ion $d^{6}$ has one pair, $t_{2g}^{6}$ has three, so two extra pairs.
(c) $\mathrm{Ni^{2+}}$, $d^{8}$ → $t_{2g}^{6}e_{g}^{2}$ (only arrangement): 2 unpaired. CFSE $=6(-0.4)+2(0.6)=-1.2\Delta_{o}$.
(d) $x-4=-2$: $\mathrm{Co^{2+}}$, $d^{7}$; tetrahedral, high spin: $e^{4}t_{2}^{3}$ (fill $e$ singly, $t_{2}$ singly, then pair in $e$): 3 unpaired. CFSE $=4(-0.6)+3(0.4)=-1.2\Delta_{t}$.
Check In (d), $-1.2\Delta_{t}\approx-1.2\times\tfrac49\Delta_{o}=-0.53\Delta_{o}$, much less than the $-0.8\Delta_{o}$ an octahedral high-spin $\mathrm{Co^{2+}}$ would gain — even so, the tetrahedral $\mathrm{[CoCl_{4}]^{2-}}$ forms readily, because four large $\mathrm{Cl^{-}}$ ions fit round $\mathrm{Co^{2+}}$ better than six.
✏️ Example 5 — JEE level: Δo against P for iron(II)
For $\mathrm{Fe^{2+}}$ the pairing energy is $P=210\ \mathrm{kJ\,mol^{-1}}$. $\Delta_{o}$ is $124\ \mathrm{kJ\,mol^{-1}}$ for $\mathrm{[Fe(H_{2}O)_{6}]^{2+}}$ and $395\ \mathrm{kJ\,mol^{-1}}$ for $\mathrm{[Fe(CN)_{6}]^{4-}}$. For each complex, calculate the energy of the high-spin and low-spin arrangements (relative to the free-ion barycentre, including pairing energy for extra pairs), decide the spin state, and give the spin-only magnetic moment and the hybridisation VBT would assign.
Energies $d^{6}$ high spin $t_{2g}^{4}e_{g}^{2}$: $E_{HS}=-0.4\Delta_{o}$ (no extra pairs). Low spin $t_{2g}^{6}$: $E_{LS}=-2.4\Delta_{o}+2P$.
Aqua $E_{HS}=-0.4(124)=-49.6\ \mathrm{kJ\,mol^{-1}}$; $E_{LS}=-2.4(124)+2(210)=-297.6+420=+122.4\ \mathrm{kJ\,mol^{-1}}$. High spin is lower: 4 unpaired, $\mu_{s}=\sqrt{24}=4.90\ \mathrm{BM}$; VBT: $sp^{3}d^{2}$, outer orbital.
Cyano $E_{HS}=-0.4(395)=-158\ \mathrm{kJ\,mol^{-1}}$; $E_{LS}=-2.4(395)+420=-948+420=-528\ \mathrm{kJ\,mol^{-1}}$. Low spin is lower: 0 unpaired, diamagnetic; VBT: $d^{2}sp^{3}$, inner orbital.
⏱ Shortcut $E_{LS}-E_{HS}=-2(\Delta_{o}-P)$: low spin whenever $\Delta_{o}\gt P$. Here $124\lt210$ (high spin) and $395\gt210$ (low spin) — no need to compute the energies.
Check The cyanide complex is stabilised by $2(395-210)=370\ \mathrm{kJ\,mol^{-1}}$ relative to its own high-spin form: $-528-(-158)=-370$ ✓.
⚠️ JEE Main traps

1. Counting d electrons wrongly. A transition metal loses its $4s$ electrons first: $\mathrm{Fe^{3+}}$ is $3d^{5}$ (not $3d^{3}4s^{2}$), $\mathrm{Cu^{2+}}$ is $3d^{9}$, $\mathrm{Co^{3+}}$ is $3d^{6}$. Find the oxidation state from the whole formula — in $\mathrm{K_{3}[Co(C_{2}O_{4})_{3}]}$ oxalate is $-2$, so cobalt is $+3$.

2. Treating H₂O as always weak. $\mathrm{[Co(H_{2}O)_{6}]^{3+}}$ and $\mathrm{[Co(NH_{3})_{6}]^{3+}}$ are low spin and diamagnetic; $\mathrm{[CoF_{6}]^{3-}}$ is high spin with 4 unpaired electrons. $\mathrm{Co^{3+}}$ is the classic exception; $\mathrm{[Co(NH_{3})_{6}]^{2+}}$, by contrast, is high spin.

3. "Strong field ⇒ low spin" for every geometry and every $d^{n}$. Tetrahedral complexes are high spin; octahedral $d^{8}$ always has 2 unpaired electrons (so $\mathrm{[Ni(NH_{3})_{6}]^{2+}}$ is $sp^{3}d^{2}$, outer orbital); $d^{3}$ always has 3.

4. Misusing $\Delta_{t}\approx\tfrac49\Delta_{o}$. It compares a tetrahedral and an octahedral complex of the same metal and ligand at the same distance — not any two complexes.

5. Colour seen = colour absorbed. A complex absorbing yellow light looks violet; a $d^{0}$ or $d^{10}$ ion (Sc³⁺, Ti⁴⁺, Zn²⁺, Cu⁺) has no $d$–$d$ transition and is colourless — unless an anhydrous salt lacks ligands altogether, as in white $\mathrm{CuSO_{4}}$.

For an octahedral $d^{5}$ ion with $\Delta_{o}\lt P$, the configuration and CFSE (pairing energy ignored) are

Colour of complexes and the importance of coordination compounds

White light contains all visible wavelengths, from violet (about $400\ \mathrm{nm}$) to red (about $750\ \mathrm{nm}$). A solution looks coloured when it absorbs part of this range; our eye sees the light that is left, which has the complementary colour of the light absorbed. Complementary colours lie opposite each other on the colour wheel.

Wavelength absorbed (nm)400–430430–490490–560560–590590–620620–750
Colour absorbedvioletbluegreenyelloworangered
Colour seenyellow (-green)orangered-violet (purple)violetblueblue-green

In a complex with a partly filled $d$ subshell, a photon whose energy matches the gap can lift an electron from the lower set to the upper one — a $d$–$d$ transition. For the octahedral $d^{1}$ ion $\mathrm{[Ti(H_{2}O)_{6}]^{3+}}$ this is simply $t_{2g}^{1}e_{g}^{0}\rightarrow t_{2g}^{0}e_{g}^{1}$. The absorption band is centred near $498\ \mathrm{nm}$ and is broad, covering much of the green–yellow region; what passes through is red and violet light, which together look purple.

📐 Rule 12.13 — Colour from d–d transitions
  1. The molar energy of the absorbed light equals the splitting: $$\Delta=\frac{N_{A}hc}{\lambda}=\frac{1.196\times10^{5}}{\lambda/\mathrm{nm}}\ \mathrm{kJ\,mol^{-1}}.$$ A larger $\Delta$ means absorption at a shorter wavelength.
  2. The colour seen is the complement of the colour absorbed.
  3. A $d$–$d$ transition needs at least one electron in the lower set and a vacancy in the upper set: $d^{0}$ and $d^{10}$ ions give no $d$–$d$ colour ($\mathrm{Sc^{3+}},\ \mathrm{Ti^{4+}},\ \mathrm{Zn^{2+}},\ \mathrm{Cu^{+}},\ \mathrm{Ag^{+}}$ complexes are colourless).
  4. Without ligands there is no splitting and no $d$–$d$ colour: anhydrous $\mathrm{CuSO_{4}}$ is white, $\mathrm{CuSO_{4}\cdot5H_{2}O}$ (with $\mathrm{[Cu(H_{2}O)_{4}]^{2+}}$ units) is blue.

Changing the ligand changes the colour. $\mathrm{[Ni(H_{2}O)_{6}]^{2+}}$ is green. Replace water with ethane-1,2-diamine and $\Delta_{o}$ increases; the absorption moves to shorter wavelength and $\mathrm{[Ni(en)_{3}]^{2+}}$ is violet. Similarly pale blue $\mathrm{[Cu(H_{2}O)_{4}]^{2+}}$ turns deep blue-violet $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$ with ammonia. Intensely coloured species such as $\mathrm{MnO_{4}^{-}}$ and $\mathrm{CrO_{4}^{2-}}$ ($d^{0}$) owe their colour to a different process, charge transfer from ligand to metal, not to $d$–$d$ transitions; that is why they are so much more intense.

✏️ Example 6 — JEE level: the purple titanium(III) ion
$\mathrm{[Ti(H_{2}O)_{6}]^{3+}}$ has its absorption maximum at $498\ \mathrm{nm}$. (a) Calculate $\Delta_{o}$ in $\mathrm{kJ\,mol^{-1}}$ and in $\mathrm{cm^{-1}}$. (b) Find the CFSE in $\mathrm{kJ\,mol^{-1}}$. (c) Explain the colour. (d) Predict qualitatively how the absorption maximum would move for $\mathrm{[TiF_{6}]^{3-}}$, and why $\mathrm{[TiF_{6}]^{2-}}$ is colourless.
Find $\Delta_{o}$ in $\mathrm{kJ\,mol^{-1}}$ before you open the solution:
(a) $\Delta_{o}=\dfrac{N_{A}hc}{\lambda}=\dfrac{(6.022\times10^{23})(6.626\times10^{-34})(2.998\times10^{8})}{498\times10^{-9}}=2.40\times10^{5}\ \mathrm{J\,mol^{-1}}=240\ \mathrm{kJ\,mol^{-1}}$. In wavenumbers $\tilde\nu=1/\lambda=1/(498\times10^{-7}\ \mathrm{cm})=20\,100\ \mathrm{cm^{-1}}$.
(b) $d^{1}$: $t_{2g}^{1}$, CFSE $=-0.4\Delta_{o}=-0.4\times240=-96.1\ \mathrm{kJ\,mol^{-1}}$.
(c) The single electron is excited $t_{2g}\rightarrow e_{g}$ by green-yellow light (a broad band round $498\ \mathrm{nm}$). Red and violet light are transmitted, and the solution appears purple.
(d) $\mathrm{F^{-}}$ lies below $\mathrm{H_{2}O}$ in the spectrochemical series, so $\Delta_{o}$ is smaller and the band moves to longer wavelength. In $\mathrm{[TiF_{6}]^{2-}}$ titanium is $+4$, $d^{0}$: no electron to excite, no $d$–$d$ band, colourless.
Check One spectrum gives $\Delta_{o}$ directly only for $d^{1}$; with more electrons several bands appear and the analysis is more involved, but the rule "larger $\Delta$, shorter $\lambda$" still holds.

In the crystal field lab choose octahedral, $d^{6}$, $\Delta_{o}=270\ \mathrm{kJ\,mol^{-1}}$ and $P=250\ \mathrm{kJ\,mol^{-1}}$ (close to $\mathrm{[Co(NH_{3})_{6}]^{3+}}$). What will the readouts show?

With octahedral, $d^{6}$, $\Delta_{o}=270$, $P=250$ the readouts show configuration t₂g⁶ eg⁰, spin state low spin · 0 unpaired, μ (spin-only) 0.00 BM, CFSE −2.4 Δo (−648 kJ/mol), light 443 nm · blue absorbed → orange seen. Since $\Delta_{o}\gt P$, pairing in $t_{2g}$ is cheaper than climbing to $e_{g}$. Being diamagnetic does not stop the colour: a $t_{2g}\rightarrow e_{g}$ jump is still possible. Now drag $\Delta_{o}$ down to $160$ (like $\mathrm{[CoF_{6}]^{3-}}$): high spin · 4 unpaired, 4.90 BM, −0.4 Δo (−64 kJ/mol), 748 nm · red absorbed → blue-green seen — and the real fluoride complex is indeed blue.
Interactive 2 — Crystal Field Lab: Splitting, Spin State and Colour

Choose the geometry, the number of $d$ electrons, the octahedral splitting $\Delta_{o}$ and the pairing energy $P$. Press Play to watch the electrons enter the split levels one by one: in an octahedral field the fourth to seventh electrons go up to $e_{g}$ if $\Delta_{o}\lt P$ and pair in $t_{2g}$ if $\Delta_{o}\gt P$. For a tetrahedral field the splitting used is $\Delta_{t}=\tfrac49\Delta_{o}$. The right panel shows the wavelength $\lambda=N_{A}hc/\Delta$ absorbed (a one-band picture) and the complementary colour you would see.

d¹240 kJ/mol250 kJ/mol
configuration—
spin state—
μ (spin-only)—
CFSE—
light—

Importance of coordination compounds. Complex formation is not a laboratory curiosity; it runs through analysis, metallurgy and life itself.

1. Qualitative and quantitative analysis. Many tests for metal ions are complex-forming reactions with a characteristic colour or solubility:

2. Extraction and purification of metals. Silver and gold are leached from their ores by aerated cyanide solution, which turns the metal into a soluble complex; zinc then displaces the noble metal:

$$\begin{aligned}&\mathrm{4Au(s)+8CN^{-}(aq)+2H_{2}O(l)+O_{2}(g)}\\&\quad\rightarrow\mathrm{4[Au(CN)_{2}]^{-}(aq)+4OH^{-}(aq)}\end{aligned}$$ $$\begin{aligned}&\mathrm{2[Au(CN)_{2}]^{-}(aq)+Zn(s)}\\&\quad\rightarrow\mathrm{[Zn(CN)_{4}]^{2-}(aq)+2Au(s)}\end{aligned}$$

In the Mond process impure nickel is converted into the volatile complex $\mathrm{[Ni(CO)_{4}]}$ at about $330$–$350\ \mathrm{K}$, which is decomposed at about $450$–$470\ \mathrm{K}$ to give very pure nickel: $\mathrm{Ni(s)+4CO(g)\rightleftharpoons[Ni(CO)_{4}](g)}$.

3. Biological systems. Life depends on metal complexes with large chelating ring ligands:

An aqueous complex has its strongest absorption at about $600\ \mathrm{nm}$. Its colour is most likely

Exercises

Unless told otherwise: spin-only moments in BM to two decimal places; CFSE in units of $\Delta_{o}$ (or $\Delta_{t}$) with pairing energy ignored; $N_{A}hc=1.196\times10^{5}\ \mathrm{kJ\,mol^{-1}\,nm}$.

I
Valence bond theory, hybridisation and magnetism.
  • 1 Find the oxidation state and the number of $d$ electrons of the metal in $\mathrm{K_{3}[Fe(CN)_{6}]}$.
  • 2 Give the hybridisation, geometry and magnetic moment of $\mathrm{[Zn(NH_{3})_{4}]^{2+}}$.
  • 3 $\mathrm{[Ni(NH_{3})_{6}]^{2+}}$: give the hybridisation, say whether it is an inner- or outer-orbital complex, and find the number of unpaired electrons.
  • 4 Give the hybridisation of $\mathrm{[Cr(NH_{3})_{6}]^{3+}}$ and its spin-only magnetic moment.
  • 5 The measured moment of $\mathrm{K_{3}[Mn(CN)_{6}]}$ is about $3.2\ \mathrm{BM}$. Find the number of unpaired electrons and the hybridisation of the manganese.
  • 6 $\mathrm{[Ni(CO)_{4}]}$ is tetrahedral and diamagnetic. Give the oxidation state of nickel and describe the bonding in VBT terms.
  • 7 $\mathrm{[PtCl_{4}]^{2-}}$ is diamagnetic. Deduce its hybridisation and geometry.
  • 8 Give two experimental facts about $\mathrm{[Ti(H_{2}O)_{6}]^{3+}}$ or $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$ that VBT cannot explain.
1 $3(+1)+x+6(-1)=0$, $x=+3$. $\mathrm{Fe}$ $3d^{6}4s^{2}$ → $\mathrm{Fe^{3+}}$ $3d^{5}$: $5$ $d$ electrons.
2 $\mathrm{Zn^{2+}}$ $3d^{10}$: no $3d$ orbital free → $sp^{3}$, tetrahedral; all electrons paired, $\mu=0$ (diamagnetic).
3 $\mathrm{Ni^{2+}}$ $3d^{8}$ cannot vacate two $3d$ orbitals → $sp^{3}d^{2}$, outer orbital; $2$ unpaired electrons ($2.83\ \mathrm{BM}$).
4 $\mathrm{Cr^{3+}}$ $3d^{3}$: three singly occupied $3d$ orbitals, two empty → $d^{2}sp^{3}$ (inner orbital); $\mu_{s}=\sqrt{15}=3.87\ \mathrm{BM}$.
5 $3(+1)+x-6=0$, $\mathrm{Mn^{3+}}$, $3d^{4}$. $3.2\ \mathrm{BM}$ is nearest $2.83$ → $2$ unpaired: the four electrons are packed as $\uparrow\downarrow\ \uparrow\ \uparrow$ in three $3d$ orbitals, leaving two $3d$ empty → $d^{2}sp^{3}$, inner orbital, low spin (high spin would give $4.90\ \mathrm{BM}$).
6 CO is neutral, so nickel is $0$: $3d^{8}4s^{2}$. Strong-field CO pushes the two $4s$ electrons into $3d$ ($3d^{10}$), leaving $4s$ and three $4p$ empty → $sp^{3}$, tetrahedral, no unpaired electrons.
7 $\mathrm{Pt^{2+}}$ is $5d^{8}$. Diamagnetic means all eight paired in four $5d$ orbitals, so one $5d$ orbital is free → $dsp^{2}$ ($5d,6s,6p^{2}$), square planar. (Large $\Delta$ for $5d$ metals makes this the rule.)
8 (i) VBT has no account of colour: it cannot explain why $\mathrm{[Ti(H_{2}O)_{6}]^{3+}}$ absorbs green-yellow light. (ii) For square planar $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$ it must promote a $3d$ electron to $4p$, which should then be easily lost — yet the complex is not readily oxidised. (Also: it cannot predict which ligands cause pairing, or give the temperature dependence of the moment.)
II
Crystal field splitting and the spectrochemical series.
  • 1 Name the $e_{g}$ and $t_{2g}$ orbitals of an octahedral complex and give the energy of each set relative to the barycentre, in units of $\Delta_{o}$.
  • 2 An octahedral complex has $\Delta_{o}=18\,000\ \mathrm{cm^{-1}}$. Estimate $\Delta_{t}$ for the tetrahedral complex of the same metal ion and ligand at the same distance.
  • 3 Arrange in order of increasing $\Delta_{o}$: $\mathrm{[Co(CN)_{6}]^{3-}}$, $\mathrm{[CoF_{6}]^{3-}}$, $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[Co(H_{2}O)_{6}]^{3+}}$.
  • 4 Explain why $\Delta_{o}$ is larger for $\mathrm{[Co(H_{2}O)_{6}]^{3+}}$ than for $\mathrm{[Co(H_{2}O)_{6}]^{2+}}$.
  • 5 Why are complexes of $4d$ and $5d$ metals almost always low spin?
  • 6 In a tetrahedral field, why do the $d_{xy}$, $d_{yz}$, $d_{xz}$ orbitals lie above $d_{x^{2}-y^{2}}$ and $d_{z^{2}}$?
  • 7 Find the number of $d$ electrons on the metal in (a) $\mathrm{[Co(en)_{3}]Cl_{3}}$, (b) $\mathrm{K_{3}[Cr(C_{2}O_{4})_{3}]}$, (c) $\mathrm{[Cu(NH_{3})_{4}]SO_{4}}$.
  • 8 Thiocyanate can bind through S or through N. Which end gives the larger $\Delta_{o}$? Why can the point-charge model not explain the position of CO at the top of the spectrochemical series?
1 $e_{g}$: $d_{x^{2}-y^{2}}$, $d_{z^{2}}$ at $+0.6\Delta_{o}$; $t_{2g}$: $d_{xy}$, $d_{yz}$, $d_{xz}$ at $-0.4\Delta_{o}$. Check: $2(0.6)+3(-0.4)=0$.
2 $\Delta_{t}\approx\tfrac49\times18\,000=8000\ \mathrm{cm^{-1}}$.
3 Same ion $\mathrm{Co^{3+}}$; order of ligands $\mathrm{F^{-}\lt H_{2}O\lt NH_{3}\lt CN^{-}}$: $\mathrm{[CoF_{6}]^{3-}}$ < $\mathrm{[Co(H_{2}O)_{6}]^{3+}}$ < $\mathrm{[Co(NH_{3})_{6}]^{3+}}$ < $\mathrm{[Co(CN)_{6}]^{3-}}$.
4 $\mathrm{Co^{3+}}$ is smaller and more highly charged than $\mathrm{Co^{2+}}$; it draws the water molecules closer, so their negative ends repel the $e_{g}$ electrons more strongly and the splitting is larger.
5 $4d$ and $5d$ orbitals are larger and reach further towards the ligands, so $\Delta$ is 30–50% larger per row; at the same time pairing energy is smaller in the larger orbitals. So $\Delta_{o}\gt P$ almost always.
6 The four ligands occupy alternate corners of a cube. $d_{xy}$, $d_{yz}$, $d_{xz}$ point towards the midpoints of the cube edges, nearer the ligands, while $d_{x^{2}-y^{2}}$ and $d_{z^{2}}$ point at face centres, farther away; the nearer orbitals are repelled more.
7 (a) en neutral → $\mathrm{Co^{3+}}$, $3d^{6}$: $6$. (b) $3+x-6=0$ → $\mathrm{Cr^{3+}}$, $3d^{3}$: $3$. (c) $\mathrm{SO_{4}^{2-}}$ → $\mathrm{Cu^{2+}}$, $3d^{9}$: $9$.
8 N-bonded $\mathrm{NCS^{-}}$ (above $\mathrm{H_{2}O}$) is stronger than S-bonded $\mathrm{SCN^{-}}$ (near $\mathrm{Cl^{-}}$). CO is neutral and only weakly polar, so as a point charge or dipole it should split the $d$ orbitals weakly; its large effect comes from covalent σ donation plus π back-bonding into its empty π* orbitals, which CFT ignores.
III
Spin states, CFSE and magnetic moments.
  • 1 Write the configuration and CFSE of an octahedral $d^{3}$ ion such as $\mathrm{Cr^{3+}}$.
  • 2 For octahedral $\mathrm{Co^{2+}}$ ($d^{7}$), give the configuration, the number of unpaired electrons and the CFSE for the high-spin and the low-spin arrangements.
  • 3 $\mathrm{[Fe(CN)_{6}]^{3-}}$: write the configuration and find the spin-only moment and the CFSE (show the pairing term).
  • 4 Tetrahedral $\mathrm{[MnCl_{4}]^{2-}}$: find the configuration, CFSE and spin-only moment.
  • 5 Tetrahedral $\mathrm{[CoCl_{4}]^{2-}}$: find the CFSE in units of $\Delta_{t}$.
  • 6 For an $\mathrm{Mn^{3+}}$ complex, $\Delta_{o}=250\ \mathrm{kJ\,mol^{-1}}$ and $P=300\ \mathrm{kJ\,mol^{-1}}$. Decide the spin state and find the CFSE in $\mathrm{kJ\,mol^{-1}}$.
  • 7 Why can an octahedral $d^{8}$ ion not be either high spin or low spin, while $d^{4}$–$d^{7}$ can?
  • 8 An octahedral iron(II) complex has $\mu=4.90\ \mathrm{BM}$. Write its $t_{2g}/e_{g}$ configuration and the VBT hybridisation, and say what kind of ligand it has.
1 $t_{2g}^{3}$; CFSE $=3(-0.4)=-1.2\Delta_{o}$ (3 unpaired, whatever the ligand).
2 High spin $t_{2g}^{5}e_{g}^{2}$: 3 unpaired, CFSE $=-2.0+1.2=-0.8\Delta_{o}$. Low spin $t_{2g}^{6}e_{g}^{1}$: 1 unpaired, CFSE $=-2.4+0.6=-1.8\Delta_{o}$ $(+P)$.
3 $\mathrm{Fe^{3+}}$ $d^{5}$, strong field → $t_{2g}^{5}$: 1 unpaired, $\mu_{s}=\sqrt3=1.73\ \mathrm{BM}$; CFSE $=-2.0\Delta_{o}+2P$ (free $d^{5}$ has no pairs, $t_{2g}^{5}$ has two).
4 $\mathrm{Mn^{2+}}$ $d^{5}$, tetrahedral (high spin): $e^{2}t_{2}^{3}$; CFSE $=2(-0.6)+3(0.4)=0$; 5 unpaired, $\mu_{s}=\sqrt{35}=5.92\ \mathrm{BM}$.
5 $\mathrm{Co^{2+}}$ $d^{7}$: $e^{4}t_{2}^{3}$, CFSE $=4(-0.6)+3(0.4)=-1.2\Delta_{t}$.
6 $d^{4}$ with $\Delta_{o}\lt P$ → high spin $t_{2g}^{3}e_{g}^{1}$ (4 unpaired). CFSE $=(-1.2+0.6)\Delta_{o}=-0.6\times250=-150\ \mathrm{kJ\,mol^{-1}}$. (Low spin would be $-1.6(250)+300=-100\ \mathrm{kJ\,mol^{-1}}$, less favourable.)
7 For $d^{8}$, six electrons fill $t_{2g}$ and the remaining two must go into $e_{g}$, singly by Hund's rule: only $t_{2g}^{6}e_{g}^{2}$ is possible. For $d^{4}$–$d^{7}$ the electrons beyond the third have a genuine choice between pairing in $t_{2g}$ and entering $e_{g}$.
8 $4.90\ \mathrm{BM}$ → 4 unpaired: high-spin $d^{6}$, $t_{2g}^{4}e_{g}^{2}$; VBT $sp^{3}d^{2}$ (outer orbital); the ligand is weak-field ($\Delta_{o}\lt P$), e.g. $\mathrm{H_{2}O}$.
IV
Colour and importance of coordination compounds.
  • 1 $\mathrm{[Cu(H_{2}O)_{6}]^{2+}}$ has a broad absorption band centred near $800\ \mathrm{nm}$ that extends well into the red. Find the corresponding $\Delta_{o}$ in $\mathrm{kJ\,mol^{-1}}$ and explain the pale blue colour.
  • 2 Explain why $\mathrm{[Sc(H_{2}O)_{6}]^{3+}}$ and $\mathrm{[Zn(H_{2}O)_{6}]^{2+}}$ are colourless.
  • 3 Green $\mathrm{[Ni(H_{2}O)_{6}]^{2+}}$ turns violet when ethane-1,2-diamine is added. Explain the change of colour.
  • 4 A complex absorbs most strongly at $600\ \mathrm{nm}$. What colour does it appear, and what is $\Delta$ in $\mathrm{kJ\,mol^{-1}}$?
  • 5 Anhydrous copper(II) sulphate is white, but the pentahydrate is blue. Explain.
  • 6 Write the equation for the leaching of gold with aerated cyanide solution. How many moles of $\mathrm{CN^{-}}$ are consumed per mole of gold, and what is the role of zinc in the next step?
  • 7 Name the metal and give its oxidation state in (a) haemoglobin, (b) chlorophyll, (c) vitamin B₁₂.
  • 8 $\mathrm{Ni^{2+}}$ is detected with dimethylglyoxime. Give the colour of the product and the number of unpaired electrons in this square planar complex. Why does $\mathrm{AgCl}$ dissolve in aqueous ammonia, and what is the hybridisation of silver in the product?
1 $\Delta_{o}=\dfrac{1.196\times10^{5}}{800}=149.5\ \mathrm{kJ\,mol^{-1}}$. The band removes red and orange light; the blue-green end of the spectrum passes, so the ion looks pale blue (the absorption is weak because $d$–$d$ transitions are weak).
2 $\mathrm{Sc^{3+}}$ is $3d^{0}$ (no electron to excite) and $\mathrm{Zn^{2+}}$ is $3d^{10}$ (no vacancy in $e_{g}$): no $d$–$d$ transition, so no visible absorption.
3 en is higher than $\mathrm{H_{2}O}$ in the spectrochemical series, so $\Delta_{o}$ increases and the absorption moves to shorter wavelength; the complementary colour seen changes from green to violet.
4 $600\ \mathrm{nm}$ is orange light, so the complex looks blue. $\Delta=\dfrac{1.196\times10^{5}}{600}=199\ \mathrm{kJ\,mol^{-1}}$.
5 Without water ligands the $\mathrm{Cu^{2+}}$ $d$ orbitals are hardly split in the visible range, so no visible light is absorbed. In the pentahydrate four water molecules surround each $\mathrm{Cu^{2+}}$; the field splits the $d$ orbitals and $d$–$d$ absorption in the red–orange gives the blue colour.
6 $\mathrm{4Au(s)+8CN^{-}(aq)+2H_{2}O(l)+O_{2}(g)}$ $\mathrm{\rightarrow4[Au(CN)_{2}]^{-}(aq)+4OH^{-}(aq)}$: $8/4=2$ mol $\mathrm{CN^{-}}$ per mol Au. Zinc, a stronger reducing agent, displaces gold: $\mathrm{2[Au(CN)_{2}]^{-}+Zn}$ $\mathrm{\rightarrow[Zn(CN)_{4}]^{2-}+2Au}$.
7 (a) Iron, $+2$; (b) magnesium, $+2$; (c) cobalt, $+3$.
8 Red (rosy-red precipitate) $\mathrm{[Ni(Hdmg)_{2}]}$; square planar $d^{8}$ ($dsp^{2}$), $0$ unpaired electrons. $\mathrm{AgCl}$ dissolves because $\mathrm{Ag^{+}}$ forms the stable soluble complex $\mathrm{[Ag(NH_{3})_{2}]^{+}}$, lowering $[\mathrm{Ag^{+}}]$ below the value needed to keep $K_{sp}$ satisfied; silver is $sp$ hybridised (linear).
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ Which of the following is an outer-orbital complex? (A) $\mathrm{[Fe(CN)_{6}]^{4-}}$ (B) $\mathrm{[Co(NH_{3})_{6}]^{3+}}$ (C) $\mathrm{[Ni(NH_{3})_{6}]^{2+}}$ (D) $\mathrm{[Cr(NH_{3})_{6}]^{3+}}$

Idea Outer orbital ($sp^{3}d^{2}$) when two $3d$ orbitals cannot be vacated.
Options (A) $\mathrm{Fe^{2+}}$ $d^{6}$, $\mathrm{CN^{-}}$ pairs → $d^{2}sp^{3}$. (B) $\mathrm{Co^{3+}}$ $d^{6}$ with $\mathrm{NH_{3}}$, low spin → $d^{2}sp^{3}$. (C) $\mathrm{Ni^{2+}}$ $d^{8}$: at most one $3d$ empty → $sp^{3}d^{2}$. (D) $\mathrm{Cr^{3+}}$ $d^{3}$: two $3d$ already empty → $d^{2}sp^{3}$.
Answer (C).
⏱ Shortcut Octahedral $d^{8}$, $d^{9}$, $d^{10}$ are always outer orbital; $d^{1}$–$d^{3}$ always inner.

E2. JEE Main · Numerical The spin-only magnetic moment of $\mathrm{[Mn(H_{2}O)_{6}]^{2+}}$ is $\mu$ BM. Find the value of $\mu^{2}$. Give the answer to the nearest integer.

Ion $\mathrm{Mn^{2+}}$: $\mathrm{[Ar]\,3d^{5}}$; water is weak-field → high spin $t_{2g}^{3}e_{g}^{2}$, $n=5$.
Moment $\mu=\sqrt{n(n+2)}=\sqrt{35}=5.92\ \mathrm{BM}$, so $\mu^{2}=35$.
Answer $35$.
⏱ Shortcut $\mu^{2}=n(n+2)$ directly: $0,3,8,15,24,35$ for $n=0$–$5$.

E3. JEE Main · MCQ Consider the octahedral cobalt(III) complexes $\mathrm{[Co(CN)_{6}]^{3-}}$, $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[Co(H_{2}O)_{6}]^{3+}}$ and $\mathrm{[CoF_{6}]^{3-}}$. Writing each complex by its ligand, the correct order of the wavelength of light absorbed is (A) $\mathrm{CN^{-}\lt NH_{3}\lt H_{2}O\lt F^{-}}$ (B) $\mathrm{F^{-}\lt H_{2}O\lt NH_{3}\lt CN^{-}}$ (C) $\mathrm{NH_{3}\lt CN^{-}\lt F^{-}\lt H_{2}O}$ (D) $\mathrm{H_{2}O\lt F^{-}\lt CN^{-}\lt NH_{3}}$

Δo Same $\mathrm{Co^{3+}}$; spectrochemical series $\mathrm{F^{-}\lt H_{2}O\lt NH_{3}\lt CN^{-}}$ gives $\Delta_{o}$ in that order.
λ $\lambda=N_{A}hc/\Delta_{o}$: the order of $\lambda$ is the reverse — smallest for $\mathrm{CN^{-}}$, largest for $\mathrm{F^{-}}$.
Answer (A).
⏱ Shortcut "Strong field, short wavelength": the order of $\lambda$ is the spectrochemical series read backwards. (B) is the order of $\Delta_{o}$ — the classic trap.

E4. JEE Main · Numerical An octahedral titanium(III) complex has a single absorption band at $500\ \mathrm{nm}$. Find the magnitude of its crystal field stabilisation energy in $\mathrm{kJ\,mol^{-1}}$. ($N_{A}=6.02\times10^{23}\ \mathrm{mol^{-1}}$, $h=6.63\times10^{-34}\ \mathrm{J\,s}$, $c=3.00\times10^{8}\ \mathrm{m\,s^{-1}}$.) Give the answer to the nearest integer.

Δo $\Delta_{o}=\dfrac{N_{A}hc}{\lambda}=\dfrac{(6.02\times10^{23})(6.63\times10^{-34})(3.00\times10^{8})}{500\times10^{-9}}=2.395\times10^{5}\ \mathrm{J\,mol^{-1}}=239.5\ \mathrm{kJ\,mol^{-1}}$.
CFSE $\mathrm{Ti^{3+}}$ is $d^{1}$, $t_{2g}^{1}$: CFSE $=-0.4\Delta_{o}=-95.8\ \mathrm{kJ\,mol^{-1}}$; magnitude $95.8$.
Answer $96$.
⏱ Shortcut $N_{A}hc\approx1.20\times10^{5}\ \mathrm{kJ\,mol^{-1}\,nm}$: $\Delta_{o}\approx120\,000/500=240$, and $0.4\times240=96$.

E5. JEE Main · MCQ Which statement about crystal field splitting is correct? (A) For the same metal, ligand and distance, $\Delta_{t}$ is larger than $\Delta_{o}$. (B) In a tetrahedral field the $d_{x^{2}-y^{2}}$ and $d_{z^{2}}$ orbitals are raised above the barycentre. (C) A low-spin octahedral $d^{6}$ complex has CFSE $-0.4\Delta_{o}$. (D) Tetrahedral complexes are almost always high spin because $\Delta_{t}$ is usually smaller than the pairing energy.

Check each (A) $\Delta_{t}\approx\tfrac49\Delta_{o}$, smaller — false. (B) In a tetrahedral field $d_{x^{2}-y^{2}},d_{z^{2}}$ form the lower $e$ set at $-0.6\Delta_{t}$ — false. (C) Low-spin $d^{6}$ is $t_{2g}^{6}$, CFSE $-2.4\Delta_{o}$; $-0.4\Delta_{o}$ is high spin — false. (D) true.
Answer (D).

E6. JEE Main · Numerical How many of the following are paramagnetic? $\mathrm{[Fe(CN)_{6}]^{4-}}$, $\mathrm{[Fe(CN)_{6}]^{3-}}$, $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[CoF_{6}]^{3-}}$, $\mathrm{[Ni(CN)_{4}]^{2-}}$, $\mathrm{[NiCl_{4}]^{2-}}$, $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$, $\mathrm{[Zn(NH_{3})_{4}]^{2+}}$, $\mathrm{[Cr(H_{2}O)_{6}]^{3+}}$. Give the answer to the nearest integer.

Unpaired $\mathrm{[Fe(CN)_{6}]^{4-}}$ $d^{6}$ LS: 0. $\mathrm{[Fe(CN)_{6}]^{3-}}$ $d^{5}$ LS: 1. $\mathrm{[Co(NH_{3})_{6}]^{3+}}$ $d^{6}$ LS: 0. $\mathrm{[CoF_{6}]^{3-}}$ $d^{6}$ HS: 4. $\mathrm{[Ni(CN)_{4}]^{2-}}$ square planar $d^{8}$: 0. $\mathrm{[NiCl_{4}]^{2-}}$ tetrahedral $d^{8}$: 2. $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$ $d^{9}$: 1. $\mathrm{[Zn(NH_{3})_{4}]^{2+}}$ $d^{10}$: 0. $\mathrm{[Cr(H_{2}O)_{6}]^{3+}}$ $d^{3}$: 3.
Count Paramagnetic: $\mathrm{[Fe(CN)_{6}]^{3-}}$, $\mathrm{[CoF_{6}]^{3-}}$, $\mathrm{[NiCl_{4}]^{2-}}$, $\mathrm{[Cu(NH_{3})_{4}]^{2+}}$, $\mathrm{[Cr(H_{2}O)_{6}]^{3+}}$ — five.
Answer $5$.
⏱ Shortcut Any odd $d$ count ($d^{5}$, $d^{9}$, $d^{3}$) is paramagnetic at once; only the even ones need a spin decision.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes (with a teacher present)

Research question. As water ligands around $\mathrm{Cu^{2+}}$ are replaced step by step by ammonia, how does the colour of the solution change, and can a phone camera follow the shift towards stronger ligand fields?

Why it matters. Colorimetry — measuring the colour of a solution to find a concentration or a ligand environment — is used in water testing (copper, iron and nitrite kits), in clinical laboratories and in field analysis in places without expensive spectrometers. Low-cost "smartphone spectrometers" are an active research area for environmental monitoring in developing regions.

What to do.

  1. Under supervision, make $25\ \mathrm{mL}$ of about $0.05\ \mathrm{mol\,L^{-1}}$ copper(II) sulphate solution in each of six identical clear vials.
  2. Add $0,\ 0.5,\ 1,\ 2,\ 4$ and $8\ \mathrm{mL}$ of $2\ \mathrm{mol\,L^{-1}}$ aqueous ammonia (in a fume cupboard or well-ventilated room), topping up with water to equal volumes. Note any pale blue precipitate of copper(II) hydroxide that forms and redissolves.
  3. Photograph the vials against the same white screen in the same light, with the camera's white balance locked.
  4. Read the red, green and blue values at the centre of each vial with a free colour-picker app; compute the "absorbance" in each channel as $A=\log_{10}(I_\text{background}/I_\text{vial})$.
  5. Plot the three absorbances against the volume of ammonia. Decide which colour of light is absorbed most at each stage, and whether the absorbed band moves to shorter wavelength.

Tools: Copper(II) sulphate, dilute aqueous ammonia, measuring cylinders, six vials, a phone camera and colour-picker app, a spreadsheet; gloves and goggles.

Hand in: The photographs, a table of RGB values and absorbances, the plot, and one paragraph linking what you see to the spectrochemical series and Rule 12.13.

Going further. Repeat with nickel(II) sulphate and ethane-1,2-diamine (green → blue → violet as en replaces water). Which ligand produces the larger shift per molecule added, and why might a chelating ligand do so?

Instructor note: the red-channel absorbance stays high throughout (both aqua and ammine copper absorb red–orange light) while the green-channel absorbance rises as the deep blue-violet $\mathrm{[Cu(NH_{3})_{4}(H_{2}O)_{2}]^{2+}}$ forms, showing the band moving to shorter wavelength. Ammonia vapour is an irritant: keep the bottle stoppered, work in a ventilated space, and collect copper waste for proper disposal.

🧪 Self-check quiz

0/5 correct

Q1. Which of the following is an inner-orbital octahedral complex?

Q2. The spin-only magnetic moment of $\mathrm{[Fe(H_{2}O)_{6}]^{3+}}$ is

Q3. The CFSE of an octahedral $d^{8}$ ion (pairing energy ignored) is

Q4. $\mathrm{[Ti(H_{2}O)_{6}]^{3+}}$ is purple because

Q5. Vitamin B₁₂ is a coordination compound of