Chapter 15 · Introduction

Chapter 15 — Hydrocarbons

Compounds of carbon and hydrogen only, and four families with four characters: alkanes substitute by free radicals, alkenes and alkynes add electrophiles across their π bonds, and benzene, held together by its aromatic sextet, substitutes instead of adding. Names, isomers, preparations, mechanisms and the products they predict.

The cylinder that cooks dinner in most Indian kitchens holds liquefied propane and butane; the CNG that runs Delhi's autos is mostly methane. Ripening rooms for bananas are flushed with a trace of ethene, the plant hormone that the fruit itself gives off, while the illegal practice of ripening mangoes with "masala" — calcium carbide — works because moisture turns the carbide into ethyne. A welder's torch burns ethyne in oxygen at over $3000\ ^\circ\mathrm{C}$. The plastic carry-bag is polythene, thousands of ethene units joined end to end, and the paracetamol and the dyes in your clothes start from benzene and toluene distilled from crude oil. These are all hydrocarbons — compounds of carbon and hydrogen only — and yet they behave in four very different ways, set by the bonds between their carbons.

The chapter takes the four families in turn. Alkanes, $\mathrm{C_{n}H_{2n+2}}$, have only σ bonds: their names, chain isomers and preparations (hydrogenation, Wurtz, decarboxylation, Kolbe), the conformations of ethane in sawhorse and Newman projections, and the free-radical chain mechanism of halogenation, which predicts the ratio of the products. Alkenes, $\mathrm{C_{n}H_{2n}}$, have an exposed π bond: geometrical isomerism, preparation by elimination (Saytzeff), electrophilic addition of $\mathrm{H_{2}}$, $\mathrm{X_{2}}$, water and HX by Markovnikov's rule, carbocation rearrangements, the peroxide effect, ozonolysis and polymerisation. Alkynes, $\mathrm{C_{n}H_{2n-2}}$, are linear: the acidity of terminal alkynes, preparation from calcium carbide, Lindlar against sodium in ammonia, two successive additions and hydration to carbonyl compounds. Finally benzene: its structure and resonance energy, aromaticity and Hückel's $4n+2$ rule, the σ-complex mechanism of electrophilic substitution — halogenation, nitration, sulphonation, Friedel–Crafts alkylation and acylation — and the directive influence of the groups already on the ring. Products, mechanisms and isomer counts from this chapter appear in every JEE Main paper.

$\mathrm{C_{n}H_{2n+2}}$→Conformations→Free-radical halogenation→Cis–trans alkenes→Markovnikov & peroxide→Ozonolysis→Acidic $\mathrm{{\equiv}C{-}H}$→Additions to $\mathrm{C{\equiv}C}$→Aromaticity, $4n+2$→Electrophilic substitution→Directing groups
🎯 By the end of this chapter you can…
  • name alkanes, alkenes, alkynes and benzene derivatives by IUPAC rules and count their structural and geometrical isomers;
  • choose a preparation — hydrogenation, Wurtz, decarboxylation, Kolbe electrolysis, elimination, carbide, dihalides — for a given hydrocarbon and predict which by-products form;
  • draw the staggered and eclipsed conformations of ethane in sawhorse and Newman projections and relate them to torsional strain;
  • write the free-radical chain mechanism of halogenation and predict the number and ratio of monohalogenation products;
  • write the electrophilic addition mechanism and predict products with $\mathrm{H_{2}}$, $\mathrm{X_{2}}$, water and HX by Markovnikov's rule, with rearrangements and the peroxide effect;
  • work out an alkene from its ozonolysis products and the moles of $\mathrm{O_{3}}$ or $\mathrm{H_{2}}$ it takes, and write addition polymerisation;
  • explain the acidity of terminal alkynes, use acetylide tests, and predict products of Lindlar or $\mathrm{Na/NH_{3}}$ reduction, two-fold HX addition and hydration;
  • decide whether a ring is aromatic, antiaromatic or non-aromatic, write the σ-complex mechanism of electrophilic substitution, and predict ortho/para or meta products and the limitations of Friedel–Crafts reactions;
  • solve JEE Main MCQ and numerical-answer problems on hydrocarbons.

Toluene, $\mathrm{C_{6}H_{5}CH_{3}}$, is treated with chlorine in UV light, with no catalyst present. Where does the chlorine go?

Choose toluene and "Cl₂, UV light". The readouts show free-radical substitution in the side chain, $1$ mol of $\mathrm{Cl_{2}}$, product benzyl chloride: light splits $\mathrm{Cl_{2}}$ into atoms, which take an H from the $\mathrm{CH_{3}}$ group to give the resonance-stabilised benzyl radical — the same chain mechanism as for alkanes (Principle 15.5). Now switch to "Cl₂, anhydrous FeCl₃, dark": the readout becomes electrophilic substitution and the products are 2-chlorotoluene and 4-chlorotoluene, because $\mathrm{FeCl_{3}}$ makes the electrophile $\mathrm{Cl^{+}}$ and $\mathrm{CH_{3}}$ is an ortho/para director (Rules 15.23, 15.25). Same reagent, different conditions, different mechanism.
Teaser — One Reagent, Five Hydrocarbons

Choose a hydrocarbon and a reagent. The structure on the left reacts to give the structure on the right (new atoms in red), and the readouts name the kind of reaction. Notice how the kind of carbon–carbon bond — σ only, an exposed π bond, or an aromatic sextet — decides between substitution and addition, and the conditions decide between free radicals and electrophiles.

reaction type—
reagent used per mol—
product—

Sections in this chapter

🎯 Chapter mixed test JEE Main · MCQJEE Main · Numerical

Eight problems drawn from all four sections and shuffled, as in the real paper; two need two sections at once. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette. For every product question, first decide the mechanism: free radical, electrophilic addition or electrophilic substitution. (Atomic masses: H 1, C 12, Ca 40.)

E1. JEE Main · MCQ 2-Methylpropene, $\mathrm{(CH_{3})_{2}C{=}CH_{2}}$, reacts with HBr in the presence of benzoyl peroxide. The major product is (A) 2-bromo-2-methylpropane (B) 1-bromo-2-methylpropane (C) 1-bromobutane (D) 2-bromobutane

Mechanism With a peroxide, HBr adds by a free-radical chain (Rule 15.16). The bromine atom adds first, to the $\mathrm{CH_{2}}$ end, because that gives the more stable tertiary radical $\mathrm{(CH_{3})_{2}\dot{C}{-}CH_{2}Br}$.
Product The radical takes an H atom from HBr: $\mathrm{(CH_{3})_{2}CH{-}CH_{2}Br}$.
Answer (B) 1-bromo-2-methylpropane (anti-Markovnikov).
⏱ Shortcut (A) is the product without peroxide. The carbon skeleton never changes in this reaction, so (C) and (D), which are unbranched, are impossible.

E2. JEE Main · Numerical 3-Methylpentane is monochlorinated in light. Find the total number of monochloro products, counting stereoisomers separately. Give the answer to the nearest integer.

Sets of equivalent H $\mathrm{CH_{3}CH_{2}CH(CH_{3})CH_{2}CH_{3}}$ is symmetrical about C3: C1 = C5, C2 = C4, C3, and the 3-methyl group — four sets, so four structural products (Rule 15.6 strategy).
Chirality 1-chloro-3-methylpentane: C3 now carries H, $\mathrm{CH_{3}}$, $\mathrm{C_{2}H_{5}}$, $\mathrm{CH_{2}CH_{2}Cl}$ — chiral, $2$. 2-chloro-3-methylpentane: C2 and C3 both chiral, molecule unsymmetrical — $4$. 3-chloro-3-methylpentane (two ethyl groups on C3) and 1-chloro-2-ethylbutane (two ethyl groups on C2) — achiral, $1$ each.
Answer $2+4+1+1=8$, i.e. $8$.
⏱ Shortcut Structural products $=4$; then check each new C–Cl carbon and the old branch point for four different groups — substituting at C1 makes C3 chiral.

E3. JEE Main · MCQ Benzene is treated with ethanoyl chloride and anhydrous $\mathrm{AlCl_{3}}$, and the product is then treated with $\mathrm{Br_{2}}$ and $\mathrm{FeBr_{3}}$. The main final product is (A) 1-(2-bromophenyl)ethan-1-one (B) 1-(4-bromophenyl)ethan-1-one (C) 1-(3-bromophenyl)ethan-1-one (D) 2-bromo-1-phenylethan-1-one

Step 1 Friedel–Crafts acylation: $\mathrm{C_{6}H_{6}+CH_{3}COCl\xrightarrow{\mathrm{AlCl_{3}}}C_{6}H_{5}COCH_{3}+HCl}$ (acetophenone; Rule 15.23).
Step 2 The $\mathrm{{-}COCH_{3}}$ group withdraws electrons by $-I$ and $-M$: it deactivates the ring and directs the electrophile $\mathrm{Br^{+}}$ to the meta position (Rule 15.25).
Answer (C) 1-(3-bromophenyl)ethan-1-one.
⏱ Shortcut A carbonyl carbon attached to the ring means meta. (D) would need bromination of the side chain, which $\mathrm{FeBr_{3}}$ does not do.

E4. JEE Main · Numerical $1.36\ \mathrm{g}$ of an open-chain alkyne X takes up exactly $0.08\ \mathrm{g}$ of hydrogen on complete hydrogenation over platinum. X gives a white precipitate with ammoniacal silver nitrate. How many structures are possible for X? Give the answer to the nearest integer.

Molar mass One triple bond takes $2\ \mathrm{mol}$ of $\mathrm{H_{2}}$. $0.08\ \mathrm{g}$ $\mathrm{H_{2}}=0.04\ \mathrm{mol}$, so X $=0.02\ \mathrm{mol}$ and $M=\dfrac{1.36}{0.02}=68\ \mathrm{g\,mol^{-1}}$.
Formula $\mathrm{C_{n}H_{2n-2}}$: $14n-2=68$, $n=5$, $\mathrm{C_{5}H_{8}}$.
Terminal only A white silver acetylide needs an acidic $\mathrm{{\equiv}C{-}H}$ (Rule 15.18). The $\mathrm{C_{5}H_{8}}$ alkynes are pent-1-yne, pent-2-yne and 3-methylbut-1-yne; pent-2-yne is internal.
Answer $2$ (pent-1-yne and 3-methylbut-1-yne).

E5. JEE Main · MCQ Which species is aromatic? (A) cycloheptatrienyl anion, $\mathrm{C_{7}H_{7}^{-}}$ (B) cyclopentadienyl cation, $\mathrm{C_{5}H_{5}^{+}}$ (C) cyclopentadienyl anion, $\mathrm{C_{5}H_{5}^{-}}$ (D) cyclopropenyl anion, $\mathrm{C_{3}H_{3}^{-}}$

Count π electrons Each ion is cyclic, planar and fully conjugated (the charged carbon is $sp^{2}$). (A) $6+2=8$; (B) $4+0=4$; (C) $4+2=6$; (D) $2+2=4$.
Hückel Aromatic needs $4n+2$ (Rule 15.22): only $6$ qualifies. $8$ and $4$ are $4n$ — antiaromatic.
Answer (C).
⏱ Shortcut Odd rings: the 5-ring wants the anion, the 3- and 7-rings want the cation.

E6. JEE Main · Numerical An alkene X, $\mathrm{C_{6}H_{12}}$, gives propanone as the only product of reductive ozonolysis. X is hydrogenated to Y, and Y is chlorinated in light. How many structurally different monochloro products does Y give? Give the answer to the nearest integer.

X from ozonolysis (15.2) Join the two carbonyl carbons of two propanone molecules by a C=C (Definition 15.7): X $=\mathrm{(CH_{3})_{2}C{=}C(CH_{3})_{2}}$, 2,3-dimethylbut-2-ene.
Y $\mathrm{H_{2}/Ni}$ gives Y $=\mathrm{(CH_{3})_{2}CH{-}CH(CH_{3})_{2}}$, 2,3-dimethylbutane.
Halogenation (15.1) Y has two sets of equivalent H: the twelve methyl H and the two methine H. Products: 1-chloro-2,3-dimethylbutane and 2-chloro-2,3-dimethylbutane.
Answer $2$.
⏱ Shortcut Counting carbons ($6$) instead of sets of equivalent H is the usual slip; symmetry first.

E7. JEE Main · MCQ Which alkane can not be prepared in good yield by the Wurtz reaction of a single haloalkane with sodium in dry ether? (A) butane (B) hexane (C) 2,3-dimethylbutane (D) propane

Wurtz $\mathrm{2R{-}X+2Na\rightarrow R{-}R+2NaX}$ joins two identical groups (Result 15.2), so a single halide gives only a symmetrical alkane with an even number of carbons.
Check Butane from bromoethane, hexane from 1-bromopropane, 2,3-dimethylbutane from 2-bromopropane. Propane ($\mathrm{C_{3}}$) would need $\mathrm{CH_{3}}$ and $\mathrm{C_{2}H_{5}}$ — two different halides, which give a mixture of ethane, propane and butane.
Answer (D).

E8. JEE Main · Numerical Ethyne made from pure calcium carbide and water is passed through a red-hot iron tube, where it trimerises completely to benzene. Find the mass of calcium carbide, in grams, needed to obtain $13.0\ \mathrm{g}$ of benzene. Give the answer to the nearest integer.

Equations (15.3) $\mathrm{CaC_{2}(s)+2H_{2}O(l)\rightarrow Ca(OH)_{2}(aq)+C_{2}H_{2}(g)}$ and $\mathrm{3C_{2}H_{2}(g)\xrightarrow{\text{873 K, Fe}}C_{6}H_{6}(g)}$.
Moles (15.4 product) $13.0\ \mathrm{g}$ of benzene ($M=78$) is $\tfrac16\ \mathrm{mol}$, which needs $3\times\tfrac16=0.5\ \mathrm{mol}$ of ethyne and so $0.5\ \mathrm{mol}$ of $\mathrm{CaC_{2}}$ ($M=64$).
Answer $0.5\times64=32\ \mathrm{g}$, i.e. $32$.
⏱ Shortcut $1$ benzene $\leftarrow3$ ethyne $\leftarrow3$ $\mathrm{CaC_{2}}$: mass of carbide $=\tfrac{3\times64}{78}\times13.0$. Forgetting the factor $3$ gives $11$.
✅ Before you start
This chapter applies the whole of Chapter 14: hybridisation, bond-line formulas and IUPAC names (Section 14.1), structural and geometrical isomerism and chirality (Section 14.2), and homolysis and heterolysis, carbocations and free radicals, electrophiles, resonance and hyperconjugation (Section 14.3) — every mechanism here is built from them. Resonance energy and enthalpies of hydrogenation and combustion use Hess's law (Section 4.2); the acidity of terminal alkynes compares $\mathrm{p}K_a$ values (Section 6.3); and the many mass and mole problems are stoichiometry (Section 1.3). Delocalised π systems and the planarity of $sp^{2}$ carbons come from Section 3.3.