Chapter 16 · Introduction

Chapter 16 — Organic Compounds Containing Halogens

Put a halogen on carbon and you get a polar, breakable C–X bond. How haloalkanes and haloarenes are named, made and ranked by their physical properties; how a nucleophile replaces the halogen by the one-step SN2 or the two-step SN1 path; how elimination and metals compete; and what chloroform, iodoform, freons and DDT have done for us and to the environment.

In 1847 chloroform put its first surgical patients to sleep, and for decades it was the anaesthetic of choice — until doctors learnt that it damages the liver and that, left in light and air, it slowly turns into the war gas phosgene. Freons, the chlorofluorocarbons that once filled every refrigerator and spray can, were prized because they are inert and non-toxic; that very inertness let them drift up to the stratosphere, where ultraviolet light breaks their C–Cl bonds and the chlorine atoms destroy ozone, opening the ozone hole that the Montreal Protocol was signed to close. DDT saved millions of lives from malaria and then thinned the eggshells of birds of prey, because it does not break down and dissolves in fat. The PVC pipe under your sink, the iodoform in an old antiseptic powder and the thyroxine made by your thyroid gland are halogen compounds too. Their usefulness and their dangers both come from one bond — the carbon–halogen bond — and from how easily it can, or cannot, be broken.

The chapter has two halves. The first describes the compounds: the classification of haloalkanes and haloarenes by the carbon that carries the halogen ($1^\circ$, $2^\circ$, $3^\circ$, allylic, benzylic, vinylic, aryl) and their IUPAC names; the nature of the C–X bond — its polarity, length and strength, and why the bond of a haloarene is shorter, stronger and harder to break; the preparations from alcohols (HX, $\mathrm{PCl_{3}}$, $\mathrm{PCl_{5}}$, $\mathrm{SOCl_{2}}$), from hydrocarbons, and by the Finkelstein and Swarts halogen exchanges; and the trends in boiling point, density and dipole moment. The second half is about reactions. A nucleophile can replace the halogen in one concerted step from the back, SN2, with inversion of configuration, or after the halide has left as a carbocation, SN1, with racemisation; the substrate, nucleophile, solvent and leaving group decide which. Elimination by alcoholic KOH competes and follows Saytzeff's rule; sodium (Wurtz) and magnesium (Grignard reagents) make new C–C and C–metal bonds; haloarenes resist nucleophiles unless nitro groups help, but undergo electrophilic substitution at the ortho and para positions. The chapter ends with the uses and environmental effects of chloroform, iodoform, freons and DDT. SN1/SN2 reasoning is one of the most frequently tested ideas in JEE Main organic chemistry.

Classes of R–X→$\mathrm{C^{\delta+}{-}X^{\delta-}}$ bond→Preparation→Physical properties→SN2: inversion→SN1: racemisation→Elimination, Saytzeff→Wurtz & Grignard→Haloarenes→$\mathrm{CHCl_{3}}$, $\mathrm{CHI_{3}}$, freons, DDT
🎯 By the end of this chapter you can…
  • classify a halide as $1^\circ$, $2^\circ$, $3^\circ$, allylic, benzylic, vinylic or aryl and give its IUPAC name;
  • explain the polarity, length and strength of the C–X bond and why aryl and vinyl halides resist substitution (resonance, $sp^{2}$ carbon, phenyl cation);
  • choose a preparation — HX with ZnCl₂, $\mathrm{PCl_{3}}$, $\mathrm{PCl_{5}}$, $\mathrm{SOCl_{2}}$, halogenation, Finkelstein, Swarts — and calculate the reagent needed;
  • rank halides by boiling point, density and dipole moment;
  • write the SN2 and SN1 mechanisms with their rate laws and stereochemistry, and decide which path a given halide, nucleophile and solvent will take;
  • predict the products of ambident nucleophiles ($\mathrm{CN^{-}}$/AgCN, $\mathrm{NO_{2}^{-}}$/$\mathrm{AgNO_{2}}$) and of elimination by Saytzeff's rule;
  • use the Wurtz, Wurtz–Fittig and Grignard reactions, including the alkane formed when a Grignard reagent meets an acidic hydrogen;
  • explain the reactions of haloarenes — nucleophilic substitution helped by ortho/para nitro groups, and ortho/para electrophilic substitution — and the uses and environmental effects of chloroform, iodoform, freons and DDT;
  • solve JEE Main MCQ and numerical-answer problems on halogen compounds.

Which bromide reacts fastest by the SN2 path with a strong nucleophile such as $\mathrm{CN^{-}}$ in a polar aprotic solvent?

Choose the strong-nucleophile conditions and step through the four bromides. The readouts show SN2, $30\times$ ethyl for $\mathrm{CH_{3}Br}$, $1\times$ for $\mathrm{CH_{3}CH_{2}Br}$, $0.02\times$ for $\mathrm{(CH_{3})_{2}CHBr}$, and no SN2 for $\mathrm{(CH_{3})_{3}CBr}$: the nucleophile must reach the back of the carbon, and every methyl group is in the way (Rule 16.6). Carbocation stability matters only for SN1 — switch to water and $\mathrm{(CH_{3})_{3}CBr}$ becomes the fastest by far, about $10^{8}$ times $\mathrm{CH_{3}Br}$, by the two-step SN1 path (Rule 16.7). Watch the animation too: SN2 flips the three groups like an umbrella (inversion); SN1 lets the nucleophile in from both faces (racemisation).
Teaser — SN2 or SN1? Watch the Halogen Leave

The three groups on the carbon are coloured so that you can follow them. In SN2 the nucleophile attacks from the side opposite the bromine and the groups turn inside out; in SN1 the bromide leaves first, the carbocation flattens, and the nucleophile can attack either face. Choose a bromide and the conditions, then press Play.

path—
relative rate—
stereochemical result—

Sections in this chapter

🎯 Chapter mixed test JEE Main · MCQJEE Main · Numerical

Eight problems drawn from both sections and shuffled, as in the real paper; one needs both sections (and Chapter 15) at once. Answer each one and press Submit (NTA marking: $+4$ correct, $-1$ wrong, $0$ unanswered), or press ⏱ Take as a timed test for the real-exam experience: $8$ questions at the JEE Main pace of $2.4$ minutes each, with the NTA question palette. Before choosing a product, look at the carbon that carries the halogen.

E1. JEE Main · MCQ Which bromide is hydrolysed fastest by the SN1 mechanism in aqueous ethanol? (A) $\mathrm{(CH_{3})_{3}CBr}$ (B) $\mathrm{C_{6}H_{5}CH(Br)CH_{3}}$ (C) $\mathrm{C_{6}H_{5}C(CH_{3})_{2}Br}$ (D) $\mathrm{C_{6}H_{5}CH_{2}Br}$

Rate-determining step SN1 rate is set by the stability of the carbocation formed in the slow step (Definition 16.7, Rule 16.7).
Compare the cations (D) $1^\circ$ benzylic; (B) $2^\circ$ benzylic; (A) $3^\circ$ alkyl; (C) $3^\circ$ and benzylic — two methyl groups (hyperconjugation, $+I$) plus resonance with the ring.
Answer (C) 2-bromo-2-phenylpropane.
⏱ Shortcut Count the stabilising features on the cationic carbon: resonance counts most, then each alkyl group.

E2. JEE Main · Numerical In how many of the following is the halogen bonded to an $sp^{2}$-hybridised carbon: $\mathrm{CH_{2}{=}CHCl}$, $\mathrm{CH_{2}{=}CHCH_{2}Cl}$, $\mathrm{C_{6}H_{5}Cl}$, $\mathrm{C_{6}H_{5}CH_{2}Cl}$, $\mathrm{CH_{3}CH{=}CHBr}$, $\mathrm{ClCH_{2}CH_{2}Cl}$, $\mathrm{(CH_{3})_{3}CCl}$, 1-chloro-4-methylbenzene, $\mathrm{C_{6}H_{5}CH(Cl)CH_{3}}$? Give the answer to the nearest integer.

Classify (Definition 16.2) Vinylic: $\mathrm{CH_{2}{=}CHCl}$, $\mathrm{CH_{3}CH{=}CHBr}$. Aryl: $\mathrm{C_{6}H_{5}Cl}$, 1-chloro-4-methylbenzene. Allylic: $\mathrm{CH_{2}{=}CHCH_{2}Cl}$. Benzylic: $\mathrm{C_{6}H_{5}CH_{2}Cl}$, $\mathrm{C_{6}H_{5}CH(Cl)CH_{3}}$. Alkyl: $\mathrm{ClCH_{2}CH_{2}Cl}$, $\mathrm{(CH_{3})_{3}CCl}$.
$sp^{2}$ C–X Only vinylic and aryl halides; in allylic and benzylic halides X sits on the $sp^{3}$ carbon next to the π system.
Answer $4$.
⏱ Shortcut These four are the halides that resist both SN1 and SN2; the allylic and benzylic ones are the most reactive of all.

E3. JEE Main · MCQ The correct order of boiling points is (A) 1-bromobutane $\gt$ 1-bromo-2-methylpropane $\gt$ 2-bromo-2-methylpropane (B) 2-bromo-2-methylpropane $\gt$ 1-bromo-2-methylpropane $\gt$ 1-bromobutane (C) 2-bromo-2-methylpropane $\gt$ 1-bromobutane $\gt$ 1-bromo-2-methylpropane (D) all three are equal, since they have the same molar mass

Isomers All three are $\mathrm{C_{4}H_{9}Br}$, so the size of the halogen is the same; what changes is the shape (Rule 16.4).
Branching More branching makes the molecule more compact and nearly spherical, with less surface for van der Waals attraction, so the boiling point falls: about $375\ \mathrm{K}$, $364\ \mathrm{K}$ and $346\ \mathrm{K}$.
Answer (A).
⏱ Shortcut Same rule as for alkanes: among isomers, the straight chain boils highest and the most branched lowest.

E4. JEE Main · Numerical A mixture of 1-bromopropane and 2-bromopropane is heated with sodium in dry ether. How many different alkanes can be formed? Give the answer to the nearest integer.

Wurtz $\mathrm{2R{-}X+2Na\rightarrow R{-}R+2NaX}$; with two halides the groups pair in every way: $\mathrm{R{-}R}$, $\mathrm{R{-}R'}$, $\mathrm{R'{-}R'}$.
Products propyl + propyl: hexane; propyl + isopropyl: 2-methylpentane; isopropyl + isopropyl: 2,3-dimethylbutane.
Answer $3$.
⏱ Shortcut Two different halides always give three alkanes — the reason Wurtz is used only with one halide.

E5. JEE Main · MCQ Which compound is converted into the corresponding phenol most easily by aqueous alkali (or even warm water)? (A) chlorobenzene (B) 1-chloro-4-nitrobenzene (C) 1-chloro-2,4-dinitrobenzene (D) 2-chloro-1,3,5-trinitrobenzene

Mechanism Nucleophilic substitution on a haloarene goes through a carbanion in which the negative charge sits on the carbons ortho and para to the attacked carbon (Rule 16.10).
Nitro groups A nitro group ortho or para takes that charge onto its oxygens by $-M$. In (D) the chlorine has nitro groups at both ortho positions and the para position.
Answer (D) — it reacts with warm water; chlorobenzene needs about $623\ \mathrm{K}$ and high pressure.

E6. JEE Main · Numerical Propan-2-ol is treated with $\mathrm{SOCl_{2}}$ to give A. A is heated with alcoholic KOH to give B. B reacts with HBr in the presence of benzoyl peroxide to give C, and C is heated with sodium in dry ether to give D. Find the molar mass of D in $\mathrm{g\,mol^{-1}}$ (H = 1, C = 12). Give the answer to the nearest integer.

A (16.1) $\mathrm{(CH_{3})_{2}CHOH+SOCl_{2}\rightarrow(CH_{3})_{2}CHCl+SO_{2}+HCl}$: 2-chloropropane.
B (16.2) Alcoholic KOH removes HCl (β-elimination, Definition 16.8): propene, $\mathrm{CH_{3}CH{=}CH_{2}}$.
C (Ch. 15) HBr with peroxide adds anti-Markovnikov: 1-bromopropane, $\mathrm{CH_{3}CH_{2}CH_{2}Br}$ (Rule 15.16).
D (16.2) Wurtz: $\mathrm{2CH_{3}CH_{2}CH_{2}Br+2Na\rightarrow CH_{3}(CH_{2})_{4}CH_{3}+2NaBr}$, hexane, $\mathrm{C_{6}H_{14}}$.
Answer $6\times12+14=86$, i.e. $86$.
⏱ Shortcut Without the peroxide C would be 2-bromopropane and D 2,3-dimethylbutane — also $\mathrm{C_{6}H_{14}}$, also $86$. The molar mass is fixed; the skeleton is what the peroxide changes.

E7. JEE Main · MCQ Chloroform is stored in closed, dark-coloured bottles filled to the brim because in air and light it is oxidised to (A) phosgene, $\mathrm{COCl_{2}}$ (B) carbon tetrachloride (C) dichloromethane (D) carbon dioxide and chlorine only

Reaction $\mathrm{2CHCl_{3}(l)+O_{2}(g)\xrightarrow{\text{light}}2COCl_{2}(g)+2HCl(g)}$ — phosgene (carbonyl chloride), a very poisonous gas.
Protection Dark glass keeps out light, a full bottle keeps out air, and a little ethanol is added to destroy any phosgene formed.
Answer (A).

E8. JEE Main · Numerical 2-Bromo-2-methylpropane is hydrolysed by aqueous $\mathrm{OH^{-}}$ by the SN1 mechanism, and bromomethane by the SN2 mechanism. In each reaction the concentration of the bromide is tripled and that of $\mathrm{OH^{-}}$ is doubled, all else unchanged. The SN1 rate becomes $x$ times and the SN2 rate $y$ times its original value. Find $x+y$. Give the answer to the nearest integer.

SN1 rate $=k[\mathrm{R{-}X}]$; $\mathrm{OH^{-}}$ is not in the slow step (Definition 16.7). So $x=3$.
SN2 rate $=k[\mathrm{R{-}X}][\mathrm{OH^{-}}]$ (Definition 16.6). So $y=3\times2=6$.
Answer $x+y=9$, i.e. $9$.
⏱ Shortcut "Uni-" and "bi-" in SN1 and SN2 tell you how many concentrations appear in the rate law.
✅ Before you start
The mechanisms of this chapter are built from Section 14.3: heterolysis, carbocations and their stability, nucleophiles and electrophiles, and the inductive and resonance effects. Inversion and racemisation need chirality and enantiomers (Section 14.2), and names follow Section 14.1. Free-radical halogenation (Section 15.1), Markovnikov addition, the peroxide effect and Saytzeff's rule (Section 15.2) and electrophilic substitution with directing groups (Section 15.4) are used to make and react halides. Rate laws, order and molecularity (Section 8.1) separate SN1 from SN2, and electronegativity and dipole moments (Section 3.2) explain the polar C–X bond.