Chapter 3 · Chemical Bonding and Molecular Structure

3.1 Ionic Bonding and Lattice Enthalpy

Atoms that lose electrons easily meet atoms that gain them readily: electrons move, ions form and a crystal lattice locks them together. The octet idea tells you which ions form; the Born–Haber cycle tells you, in $\mathrm{kJ\,mol^{-1}}$, why the crystal is worth building.

Drop a small piece of sodium into a flask of chlorine and the soft, silvery metal burns with a bright yellow flame; a white smoke settles as cubic crystals of common salt. A metal so reactive that it is stored under oil and a gas so poisonous that it was used as a weapon have combined into a substance you sprinkle on food. The crystals are hard and brittle, melt only at $801\ ^{\circ}\mathrm{C}$, do not conduct electricity as solids but conduct well when molten or dissolved in water. Something holds sodium and chlorine together very strongly — but not as small separate molecules.

This section explains that "something". We start with the simplest model of bonding, the Kossel–Lewis approach, and its central idea, the octet rule, together with the places where that rule breaks down. We then follow the formation of an ionic bond step by step and discover a surprise: turning a sodium atom and a chlorine atom into a pair of ions always costs energy. The energy that pays the bill is the lattice enthalpy, which we calculate with the Born–Haber cycle — a direct application of Hess's law. We use the ionisation enthalpy and electron gain enthalpy of atoms (energies needed to remove an electron from, or released when an electron is added to, a gaseous atom) and electronic configurations from Section 2.4; these periodic trends are treated fully in Section 9.2.

The Kossel–Lewis approach and the octet rule

A chemical bond is the attractive force that holds atoms (or ions) together in a substance. Two facts about the noble gases helium to radon pointed the way to an explanation of bonding. First, they are almost unreactive. Second, their outer shells are full: $ns^{2}np^{6}$ — eight electrons — for neon to radon, $1s^{2}$ for helium. The elements on either side of them are the most reactive in the periodic table: the alkali metals, one electron beyond a noble-gas configuration, and the halogens, one electron short of it.

📘 Definition 3.1 — Valence electrons and Lewis symbols

The electrons of the outermost shell of an atom are its valence electrons; for main-group elements their number equals the group number for Groups 1–2 and (group number $-\,10$) for Groups 13–18. The nucleus together with the inner electrons is called the kernel.

In a Lewis symbol (electron-dot symbol) the element's symbol stands for the kernel and the valence electrons are shown as dots around it — placed singly on the four sides first and paired only when a side must hold a second electron. The number of unpaired dots is a first guess at the number of bonds the atom forms (its valence).

Kossel's picture (1916) concerns elements far apart in the periodic table. A highly electropositive atom (an alkali or alkaline-earth metal) loses its valence electrons and becomes a cation with the configuration of the preceding noble gas; a highly electronegative atom (a halogen, oxygen) gains electrons and becomes an anion with the configuration of the next noble gas. The oppositely charged ions then hold each other by electrostatic attraction. Thus $\mathrm{Na}$ ($[\mathrm{Ne}]3s^{1}$) gives $\mathrm{Na^{+}}$ ($[\mathrm{Ne}]$) and $\mathrm{Cl}$ ($[\mathrm{Ne}]3s^{2}3p^{5}$) gives $\mathrm{Cl^{-}}$ ($[\mathrm{Ar}]$).

Lewis's picture (1916) covers the much larger family of bonds between atoms that are similar, such as two chlorine atoms or carbon and hydrogen. Neither atom can take an electron away from the other; instead they share pairs of electrons, and each shared pair counts towards the outer shell of both atoms. That idea — the covalent bond — is developed in Section 3.2. Both pictures rest on one common goal, which together they make into a rule.

📐 Rule 3.1 — The octet rule (Kossel–Lewis)

Atoms of the main-group elements tend to combine — by transferring electrons (Kossel: ionic bond) or by sharing electron pairs (Lewis: covalent bond) — in such a way that each atom ends up with eight electrons in its valence shell, the configuration of a noble gas.

Scope: the rule is an empirical guide, not a law of nature. It works best for compounds of the second-period elements C, N, O and F. Hydrogen, lithium and beryllium reach the duplet of helium ($1s^{2}$) instead, and the rule makes no claim about the energy or shape of the molecule.

Where the octet rule fails. JEE Main expects you to recognise four kinds of exception, and to know two deeper limitations.

  1. Incomplete octet — the central atom has fewer than eight electrons: $\mathrm{LiCl}$ (Li: 2), $\mathrm{BeH_{2}}$ and gaseous $\mathrm{BeCl_{2}}$ (Be: 4), $\mathrm{BF_{3}}$, $\mathrm{BCl_{3}}$ and $\mathrm{AlCl_{3}}$ monomer (B, Al: 6). These elements have fewer than four valence electrons to share.
  2. Odd-electron molecules — the total number of valence electrons is odd, so at least one atom cannot have an octet: $\mathrm{NO}$ ($5+6=11$ electrons), $\mathrm{NO_{2}}$ ($5+12=17$), $\mathrm{ClO_{2}}$ ($7+12=19$). Such molecules have an unpaired electron (they are free radicals) and are paramagnetic.
  3. Expanded octet — elements of period 3 and beyond, which have vacant $d$ orbitals in the valence shell, can hold more than eight electrons: $\mathrm{PF_{5}}$ (P: 10), $\mathrm{SF_{6}}$ (S: 12), $\mathrm{IF_{7}}$ (I: 14), $\mathrm{H_{2}SO_{4}}$ (S: 12 when drawn with two $\mathrm{S{=}O}$ bonds). Second-period atoms (N, O, F) never expand their octet: there is no $2d$ subshell.
  4. Noble-gas compounds — the rule was built on the inertness of the noble gases, yet xenon and krypton form compounds such as $\mathrm{XeF_{2}}$, $\mathrm{XeF_{4}}$, $\mathrm{XeF_{6}}$, $\mathrm{XeO_{3}}$ and $\mathrm{KrF_{2}}$, in which the noble-gas atom has 10, 12 or 14 electrons around it.

In addition, the octet rule says nothing about the shape of a molecule (why is water bent?) and nothing about the energy — it cannot tell you how stable a molecule is or why a bond forms at all. Transition-metal ions are a further warning: $\mathrm{Fe^{3+}}$ ($[\mathrm{Ar}]3d^{5}$), $\mathrm{Zn^{2+}}$ ($[\mathrm{Ar}]3d^{10}$) and $\mathrm{Cu^{+}}$ ($[\mathrm{Ar}]3d^{10}$) are perfectly stable ions without a noble-gas configuration. Energy is what really decides, and the next two subsections put numbers on it.

🧭 Problem-solving strategy — Does an atom obey the octet rule?
  1. Count the total valence electrons of the species: add the valence electrons of all atoms, add one for each negative charge and subtract one for each positive charge. If the total is odd, the species is an odd-electron species and some atom must break the rule.
  2. Count the electrons around the central atom: two for each bond it forms (a double bond counts four) plus two for each lone pair. For a central atom $A$ bonded to $n$ monovalent atoms (H or halogen) with no lone pairs this is simply $2n$.
  3. Compare with 8 (2 for H, Li, Be in its duplet compounds): fewer = incomplete octet (look for B, Be, Al, Li); more = expanded octet (only period 3 or later).
✏️ Example 1 — Who keeps the octet?
For each species give the number of valence electrons around the central atom and classify it as obeying the octet rule, having an incomplete octet, having an expanded octet or being an odd-electron species: (a) $\mathrm{NCl_{3}}$, (b) $\mathrm{BCl_{3}}$, (c) $\mathrm{PCl_{5}}$, (d) $\mathrm{XeF_{2}}$, (e) $\mathrm{NO_{2}}$, (f) $\mathrm{BF_{4}^{-}}$.
(a) N has 5 valence electrons; 3 are used in three $\mathrm{N{-}Cl}$ bonds and 2 form a lone pair. Around N: $3\times2+2=8$ — octet.
(b) B has only 3 valence electrons, all used in three $\mathrm{B{-}Cl}$ bonds: $3\times2=6$ — incomplete octet.
(c) P uses all 5 valence electrons in five bonds: $5\times2=10$ — expanded octet (P is in period 3).
(d) Xe has 8 valence electrons; 2 are used in two $\mathrm{Xe{-}F}$ bonds and 6 remain as three lone pairs: $2\times2+3\times2=10$ — expanded octet of a noble gas.
(e) Total $5+2\times6=17$, an odd number — odd-electron species; N carries the unpaired electron and has 7 electrons around it.
(f) B has 3 valence electrons; the extra electron of the negative charge gives it 4, enough for four $\mathrm{B{-}F}$ bonds: $4\times2=8$ — octet. Accepting a fourth pair (here from $\mathrm{F^{-}}$) is how boron compounds repair their incomplete octet.
Check Only the period-3 atoms (P) and the noble gas Xe exceed eight; N, the second-period atom, stops at exactly eight.

In which of the following molecules does the central atom have an expanded octet?

Formation of the ionic bond

Follow the formation of sodium chloride from isolated gaseous atoms. Sodium loses its $3s$ electron and chlorine accepts it into its $3p$ subshell:

$$\mathrm{Na(g)\rightarrow Na^{+}(g)+e^{-}}\qquad \Delta_{i}H=+496\ \mathrm{kJ\,mol^{-1}}$$ $$\mathrm{Cl(g)+e^{-}\rightarrow Cl^{-}(g)}\qquad \Delta_{eg}H=-349\ \mathrm{kJ\,mol^{-1}}$$

Adding the two equations, $\mathrm{Na(g)+Cl(g)\rightarrow Na^{+}(g)+Cl^{-}(g)}$ has $\Delta H=+147\ \mathrm{kJ\,mol^{-1}}$. Making the ions costs energy. This is true for every pair of atoms: the smallest first ionisation enthalpy of any element (caesium, $376\ \mathrm{kJ\,mol^{-1}}$) is larger than the largest energy released on electron gain (chlorine, $349\ \mathrm{kJ\,mol^{-1}}$). Electron transfer alone never pays for itself. What pays is the electrostatic attraction between the ions once they are formed.

📘 Definition 3.2 — Ionic (electrovalent) bond and electrovalency

An ionic bond (electrovalent bond) is the electrostatic attraction between oppositely charged ions formed by the complete transfer of one or more electrons from an atom of low ionisation enthalpy to an atom of high (more negative) electron gain enthalpy.

The number of electrons an atom loses or gains in forming the ion — equal to the magnitude of the charge on the ion — is its electrovalency: $\mathrm{Na}$ and $\mathrm{Cl}$ in $\mathrm{NaCl}$ have electrovalency 1; $\mathrm{Ca}$ in $\mathrm{CaF_{2}}$ has 2; $\mathrm{N}$ in $\mathrm{Mg_{3}N_{2}}$ ($\mathrm{N^{3-}}$) has 3.

The attraction acts equally in all directions, so an ionic bond is non-directional: each ion attracts all the oppositely charged ions around it. An ionic solid is therefore a three-dimensional crystal lattice of ions, not a collection of molecules; its formula ($\mathrm{NaCl}$, $\mathrm{CaF_{2}}$) only gives the ratio of the ions.

How much does the attraction give back? Two ions of charges $z_{+}e$ and $z_{-}e$ at a distance $r$ attract with the Coulomb energy $-\dfrac{z_{+}z_{-}e^{2}}{4\pi\varepsilon_{0}r}$. Multiplying by the Avogadro constant gives a handy chemist's form, with $r$ in ångström ($1\ \text{Å}=100\ \mathrm{pm}$):

$$E_\text{Coulomb}=-\frac{1389\ \mathrm{kJ\,mol^{-1}}\,\text{Å}\times z_{+}z_{-}}{r} .$$

Ions cannot come closer than about the sum of their radii, $r_{0}=r_{+}+r_{-}$, because their electron clouds then repel strongly. For $\mathrm{Na^{+}}$ ($102\ \mathrm{pm}$) and $\mathrm{Cl^{-}}$ ($181\ \mathrm{pm}$), $r_{0}=2.83\ \text{Å}$ and $E_\text{Coulomb}=-1389/2.83=-491\ \mathrm{kJ\,mol^{-1}}$ — far more than the $147\ \mathrm{kJ\,mol^{-1}}$ spent on the ions. In a crystal each ion is surrounded by many neighbours of opposite charge, and the energy released is larger still. This is the energy logic of every ionic compound:

📐 Result 3.2 — Conditions that favour the formation of an ionic bond

The formation of an ionic compound from its elements is favoured when:

  1. the metal has a low ionisation enthalpy (sum of the ionisation enthalpies for a multiply charged cation) — so it gives up electrons cheaply: alkali and alkaline-earth metals;
  2. the non-metal has a large negative electron gain enthalpy — so electron gain releases energy: halogens, and oxygen (whose overall gain of two electrons is endothermic but is repaid by the much larger lattice enthalpy of oxides);
  3. the lattice enthalpy is large — small ions with high charges, which attract strongly (Result 3.4).

These three are not independent requirements: only the sum matters. The ionic compound forms if the energy released in building the lattice outweighs the energy spent in making the gaseous ions (and in atomising the elements). A large difference in electronegativity between the two elements is a convenient single indicator of conditions 1 and 2.

What the ionic model explains. Because every ion is held by many strong, non-directional attractions, ionic solids are hard and have high melting and boiling points ($\mathrm{NaCl}$ $801\ ^{\circ}\mathrm{C}$, $\mathrm{MgO}$ about $2850\ ^{\circ}\mathrm{C}$). They are brittle: a blow that shifts one layer of ions by half a spacing brings like charges face to face, and the crystal splits. The ions cannot move in the solid, so it does not conduct; in the melt or in aqueous solution they move freely and carry current. Many ionic compounds dissolve in polar solvents such as water, whose molecules surround and stabilise the separated ions.

✏️ Example 2 — Paying for the ions
Use $\Delta_{i}H(\mathrm{K})=419$, $\Delta_{i}H(\mathrm{Na})=496$, $\Delta_{eg}H(\mathrm{Cl})=-349\ \mathrm{kJ\,mol^{-1}}$ and the ionic radii $\mathrm{K^{+}}$ $138\ \mathrm{pm}$, $\mathrm{Na^{+}}$ $102\ \mathrm{pm}$, $\mathrm{Cl^{-}}$ $181\ \mathrm{pm}$. (a) Find $\Delta H$ for $\mathrm{K(g)+Cl(g)\rightarrow K^{+}(g)+Cl^{-}(g)}$. (b) Find the Coulomb energy of a $\mathrm{K^{+}Cl^{-}}$ ion pair at contact and the net energy of forming the pair from the atoms (ignore repulsion). (c) Which pair, $\mathrm{K^{+}Cl^{-}}$ or $\mathrm{Na^{+}Cl^{-}}$, is cheaper to ionise, and which is held more strongly once formed? Explain.
Find the net energy of forming the $\mathrm{K^{+}Cl^{-}}$ pair in (b) before you open the solution:
(a) Add the ionisation and the electron gain: $\Delta H=419+(-349)=+70\ \mathrm{kJ\,mol^{-1}}$ — still uphill, but less than the $+147$ for sodium.
(b) $r_{0}=138+181=319\ \mathrm{pm}=3.19\ \text{Å}$; $E_\text{Coulomb}=-\dfrac{1389}{3.19}=-435\ \mathrm{kJ\,mol^{-1}}$. Net: $+70-435=-365\ \mathrm{kJ\,mol^{-1}}$.
(c) Potassium is cheaper to ionise ($70$ vs $147$) because its outer electron is in the $4s$ orbital, farther from the nucleus. But $\mathrm{K^{+}}$ is larger, so the ions cannot approach as closely: for $\mathrm{Na^{+}Cl^{-}}$, $E_\text{Coulomb}=-1389/2.83=-491\ \mathrm{kJ\,mol^{-1}}$, stronger than $-435$. Net for $\mathrm{NaCl}$: $147-491=-344\ \mathrm{kJ\,mol^{-1}}$.
Moral The two factors pull in opposite directions down a group — a larger cation is easier to make but binds less strongly. Neither number alone decides; only the full energy balance does, which is why we need the Born–Haber cycle.
Check Including the short-range repulsion of the electron clouds reduces each attraction by roughly an eighth (the Ion-Pair Lab below includes it), but the conclusion does not change.

In the Ion-Pair Lab choose the cation $\mathrm{Mg^{2+}}$ and the anion $\mathrm{O^{2-}}$. Is a single gaseous $\mathrm{Mg^{2+}O^{2-}}$ ion pair lower or higher in energy than the separate atoms $\mathrm{Mg(g)+O(g)}$?

Select $\mathrm{Mg^{2+}}$ and $\mathrm{O^{2-}}$: the readouts show a cost to make the ions of $+2846\ \mathrm{kJ\,mol^{-1}}$ ($738+1451$ for two ionisations, $-141+798$ for two electron gains), $r_{0}=2.12\ \text{Å}$, a Coulomb energy at $r_{0}$ of $-2621\ \mathrm{kJ\,mol^{-1}}$, and an ion-pair energy (with repulsion) of $+552\ \mathrm{kJ\,mol^{-1}}$ — above the atoms. The attraction is indeed about four times stronger, but making $\mathrm{Mg^{2+}}$ and $\mathrm{O^{2-}}$ costs almost twenty times more than making $\mathrm{Na^{+}}$ and $\mathrm{Cl^{-}}$. Magnesium oxide exists only as a crystal, where each ion has six neighbours of opposite charge and the lattice enthalpy ($3845\ \mathrm{kJ\,mol^{-1}}$, next subsection) repays the cost. Compare $\mathrm{Na^{+}}$ with $\mathrm{Cl^{-}}$: cost $+147$, ion pair $-283\ \mathrm{kJ\,mol^{-1}}$.
Interactive 1 — Ion-Pair Lab: Paying for the Ions

Choose a cation and an anion. The graph shows the energy of the gaseous ion pair as the ions approach, measured from the separate neutral atoms (dashed line at $0$). Far apart, the pair sits at the cost of making the ions (ionisation enthalpies plus electron gain enthalpies, grey dashed line). As the ions approach, Coulomb attraction pulls the energy down until the electron clouds touch at $r_{0}=r_{+}+r_{-}$ and repulsion takes over. Press Play to watch the anion approach.

cost to make the ions—
contact distance $r_0$—
Coulomb energy at $r_0$—
energy of ion pair—

The first ionisation enthalpy of caesium ($376\ \mathrm{kJ\,mol^{-1}}$) is larger than the energy released when chlorine gains an electron ($349\ \mathrm{kJ\,mol^{-1}}$). Why, then, does caesium chloride form readily from its elements?

Lattice enthalpy and the Born–Haber cycle

The energy released when gaseous ions come together into a crystal is the key quantity of ionic bonding. It cannot be measured directly — nobody can collect a mole of free gaseous ions and let them condense — but it can be calculated exactly from quantities that can be measured.

📘 Definition 3.3 — Lattice enthalpy

The lattice enthalpy $\Delta_\text{lattice}H$ of an ionic compound is the enthalpy change when one mole of the solid compound is completely separated into its gaseous ions, at standard conditions (1 bar, usually $298\ \mathrm{K}$):

$$\mathrm{NaCl(s)\rightarrow Na^{+}(g)+Cl^{-}(g)}\qquad \Delta_\text{lattice}H=+788\ \mathrm{kJ\,mol^{-1}}$$

With this definition the lattice enthalpy is always positive (separating attracting ions needs energy). The reverse process, the formation of the lattice from gaseous ions, releases the same amount: $-\Delta_\text{lattice}H$. The larger the lattice enthalpy, the more stable the crystal.

The calculation uses Hess's law: because enthalpy is a state function, the enthalpy change between a given initial state and a given final state is the same whatever route — one step or many — connects them (at the same temperature and pressure). Section 4.2 develops it fully; here we only need the statement. Max Born and Fritz Haber (1919) applied it to the formation of an ionic solid from its elements by two routes.

📐 Principle 3.3 — The Born–Haber cycle

The standard enthalpy of formation of an ionic solid equals the sum of the enthalpies of a stepwise route from the elements in their standard states to the solid through gaseous atoms and gaseous ions. For a 1 : 1 compound $\mathrm{MX}$ of a metal M and a halogen $\mathrm{X_{2}}$:

StepProcessEnthalpy
1$\mathrm{M(s)\rightarrow M(g)}$$\Delta_\text{sub}H$ (atomisation of M)
2$\mathrm{M(g)\rightarrow M^{+}(g)+e^{-}}$$\Delta_{i}H$
3$\mathrm{\tfrac12X_{2}(g)\rightarrow X(g)}$$\tfrac12\Delta_\text{bond}H(\mathrm{X{-}X})$
4$\mathrm{X(g)+e^{-}\rightarrow X^{-}(g)}$$\Delta_{eg}H$
5$\mathrm{M^{+}(g)+X^{-}(g)\rightarrow MX(s)}$$-\Delta_\text{lattice}H$
sum$\mathrm{M(s)+\tfrac12X_{2}(g)\rightarrow MX(s)}$$\Delta_{f}H^{\circ}$
$$\Delta_{f}H^{\circ}=\Delta_\text{sub}H+\Delta_{i}H+\tfrac12\Delta_\text{bond}H+\Delta_{eg}H-\Delta_\text{lattice}H$$

so that $\Delta_\text{lattice}H=\Delta_\text{sub}H+\Delta_{i}H+\tfrac12\Delta_\text{bond}H+\Delta_{eg}H-\Delta_{f}H^{\circ}$. Every quantity except the lattice enthalpy can be measured, so the cycle gives it; equally, if the lattice enthalpy is known (or estimated), the cycle gives any one other unknown.

For other formulas each step is scaled to the formula: for $\mathrm{MX_{2}}$ use $\Delta_{i}H_{1}+\Delta_{i}H_{2}$, the whole bond enthalpy of $\mathrm{X_{2}}$ and $2\Delta_{eg}H$; for an oxide MO use $\tfrac12\Delta_\text{bond}H(\mathrm{O{=}O})$ and the sum of the first and second electron gain enthalpies of oxygen. If the non-metal is not a gas in its standard state (bromine is a liquid, iodine a solid), include the enthalpy of vaporisation or sublimation of half a mole of $\mathrm{X_{2}}$.

🧭 Problem-solving strategy — Born–Haber calculations
  1. Write the formation equation for one mole of the compound with state symbols, e.g. $\mathrm{Ca(s)+Cl_{2}(g)\rightarrow CaCl_{2}(s)}$.
  2. List the steps with their multiples: atomise the metal; remove as many electrons as the cation charge; atomise the non-metal (how many atoms? which state?); add electrons to each non-metal atom.
  3. Watch the signs: atomisation and ionisation are positive; first electron gain enthalpies are usually negative; the second electron gain of O or S is positive; lattice formation is $-\Delta_\text{lattice}H$.
  4. Solve the one equation $\Delta_{f}H^{\circ}=\sum(\text{steps})-\Delta_\text{lattice}H$ for the unknown, and check that the lattice enthalpy comes out positive and of a sensible size (about $700$–$1050\ \mathrm{kJ\,mol^{-1}}$ for alkali halides, $2000$–$4000$ for compounds of doubly charged ions).
✏️ Example 3 — The lattice enthalpy of sodium chloride
Calculate the lattice enthalpy of $\mathrm{NaCl}$ from: $\Delta_\text{sub}H(\mathrm{Na})=+108.4$, $\Delta_{i}H(\mathrm{Na})=+495.8$, $\Delta_\text{bond}H(\mathrm{Cl{-}Cl})=+242$, $\Delta_{eg}H(\mathrm{Cl})=-348.6$ and $\Delta_{f}H^{\circ}(\mathrm{NaCl,s})=-411.2$ (all in $\mathrm{kJ\,mol^{-1}}$). Which step of the cycle is the largest in size?
Find $\Delta_\text{lattice}H$ before you open the solution:
Equation $\mathrm{Na(s)+\tfrac12Cl_{2}(g)\rightarrow NaCl(s)}$, $\Delta_{f}H^{\circ}=-411.2\ \mathrm{kJ\,mol^{-1}}$.
Steps 1–4 $108.4+495.8+\tfrac12(242)+(-348.6)=108.4+495.8+121-348.6=+376.6\ \mathrm{kJ\,mol^{-1}}$: getting from the elements to the gaseous ions $\mathrm{Na^{+}(g)+Cl^{-}(g)}$ is uphill by $376.6\ \mathrm{kJ\,mol^{-1}}$.
Solve $-411.2=376.6-\Delta_\text{lattice}H$, so $\Delta_\text{lattice}H=376.6+411.2=+787.8\ \mathrm{kJ\,mol^{-1}}\approx788\ \mathrm{kJ\,mol^{-1}}$.
Largest The lattice step ($788$) is larger than any other — larger even than the ionisation of sodium ($496$). The formation of NaCl is exothermic only because the lattice step more than repays steps 1–4.
Check The Coulomb energy of a single ion pair was $-491\ \mathrm{kJ\,mol^{-1}}$; the crystal gives about $1.6$ times as much, as expected when each ion has six nearest neighbours and many more distant ones.
✏️ Example 4 — Electron gain enthalpy of bromine from potassium bromide
For $\mathrm{KBr}$: $\Delta_{f}H^{\circ}=-394$, $\Delta_\text{lattice}H=+689$, $\Delta_\text{sub}H(\mathrm{K})=+89$, $\Delta_{i}H(\mathrm{K})=+419$, $\Delta_\text{vap}H(\mathrm{Br_{2},l})=+31$, $\Delta_\text{bond}H(\mathrm{Br{-}Br})=+193$ (all $\mathrm{kJ\,mol^{-1}}$). Find $\Delta_{eg}H$ of bromine. What error would a student make by forgetting that bromine is a liquid at $298\ \mathrm{K}$?
Route $\mathrm{K(s)+\tfrac12Br_{2}(l)\rightarrow KBr(s)}$. Bromine must be vaporised and dissociated: $\mathrm{\tfrac12Br_{2}(l)\rightarrow\tfrac12Br_{2}(g)\rightarrow Br(g)}$, costing $\tfrac12(31)+\tfrac12(193)=15.5+96.5=112\ \mathrm{kJ\,mol^{-1}}$.
Equation $-394=89+419+112+\Delta_{eg}H-689$.
Solve $\Delta_{eg}H=-394-620+689=-325\ \mathrm{kJ\,mol^{-1}}$.
Error Leaving out $\tfrac12\Delta_\text{vap}H$ would give $-394-604.5+689=-309.5\ \mathrm{kJ\,mol^{-1}}$ — wrong by $15.5\ \mathrm{kJ\,mol^{-1}}$. Every step must start from the element in its standard state.
Check The value is a little less negative than that of chlorine ($-349$): the added electron enters the larger $4p$ subshell, farther from the nucleus — the expected group trend.

What makes a lattice enthalpy large? The Coulomb formula above already contains the answer: the attraction grows with the product of the charges and falls with the distance between the ion centres. For compounds with the same type of crystal structure the lattice enthalpy follows that formula closely.

📐 Result 3.4 — Factors that determine the lattice enthalpy

For ionic compounds with the same arrangement of ions,

$$\Delta_\text{lattice}H\ \propto\ \frac{z_{+}\,z_{-}}{r_{+}+r_{-}} .$$
  1. Charge (the stronger effect): doubling both charges multiplies the lattice enthalpy about four times — $\mathrm{NaF}$ $932$, $\mathrm{MgO}$ $3845\ \mathrm{kJ\,mol^{-1}}$ (the ions in both are isoelectronic with neon and have similar sizes).
  2. Size: for the same charges, smaller ions give a larger lattice enthalpy — $\mathrm{LiF}\gt\mathrm{NaF}\gt\mathrm{KF}$ and $\mathrm{NaF}\gt\mathrm{NaCl}\gt\mathrm{NaBr}\gt\mathrm{NaI}$.

A high lattice enthalpy goes with a high melting point and hardness. Whether a salt dissolves in water depends on the balance between the lattice enthalpy and the energy released when water surrounds the ions (hydration), so lattice enthalpy alone does not predict solubility.

✏️ Example 5 — The second electron gain enthalpy of oxygen
The second electron gain enthalpy of oxygen, $\mathrm{O^{-}(g)+e^{-}\rightarrow O^{2-}(g)}$, cannot be measured directly, because the free $\mathrm{O^{2-}}$ ion is unstable. Find it from the Born–Haber cycle of $\mathrm{MgO}$: $\Delta_{f}H^{\circ}(\mathrm{MgO,s})=-602$, $\Delta_\text{lattice}H=+3845$, $\Delta_\text{sub}H(\mathrm{Mg})=+148$, $\Delta_{i}H_{1}(\mathrm{Mg})=+738$, $\Delta_{i}H_{2}(\mathrm{Mg})=+1451$, $\Delta_\text{bond}H(\mathrm{O{=}O})=+498$, $\Delta_{eg}H_{1}(\mathrm{O})=-141$ (all $\mathrm{kJ\,mol^{-1}}$). Explain the sign of your answer and why MgO is nevertheless very stable.
Find $\Delta_{eg}H_{2}$ of oxygen before you open the solution:
Route $\mathrm{Mg(s)+\tfrac12O_{2}(g)\rightarrow MgO(s)}$: atomise Mg; remove two electrons; atomise half a mole of $\mathrm{O_{2}}$ ($\tfrac12\times498=249$); add two electrons to O; build the lattice.
Equation $-602=148+738+1451+249+(-141)+\Delta_{eg}H_{2}-3845$.
Solve The known steps add to $148+738+1451+249-141=2445$. So $\Delta_{eg}H_{2}=-602-2445+3845=+798\ \mathrm{kJ\,mol^{-1}}$.
Sign Positive: the second electron is pushed onto an ion that is already negative, and the repulsion outweighs the attraction of the nucleus. Overall $\mathrm{O(g)+2e^{-}\rightarrow O^{2-}(g)}$ costs $-141+798=+657\ \mathrm{kJ\,mol^{-1}}$, and the gaseous ions $\mathrm{Mg^{2+}+O^{2-}}$ lie $3243\ \mathrm{kJ\,mol^{-1}}$ above the elements.
Stability The enormous lattice enthalpy of the doubly charged, small ions ($3845\ \mathrm{kJ\,mol^{-1}}$) repays all of it with $602\ \mathrm{kJ\,mol^{-1}}$ to spare. The oxide ion exists only because a lattice (or a solvent) stabilises it.
✏️ Example 6 — Why MgCl₂ and not MgCl?
Magnesium always forms $\mathrm{MgCl_{2}}$, although removing the second electron from magnesium costs almost twice as much as removing the first. Test the hypothetical compound $\mathrm{MgCl}$ (containing $\mathrm{Mg^{+}}$). (a) Taking its lattice enthalpy as $753\ \mathrm{kJ\,mol^{-1}}$ (an estimate: $\mathrm{Mg^{+}}$ would be about the size of $\mathrm{Na^{+}}$), calculate $\Delta_{f}H^{\circ}(\mathrm{MgCl,s})$. (b) Given $\Delta_{f}H^{\circ}(\mathrm{MgCl_{2},s})=-641\ \mathrm{kJ\,mol^{-1}}$, find $\Delta H$ for $\mathrm{2MgCl(s)\rightarrow Mg(s)+MgCl_{2}(s)}$ and decide whether MgCl could be kept. (c) Find the lattice enthalpy of $\mathrm{MgCl_{2}}$ and explain where the extra stability comes from. Data ($\mathrm{kJ\,mol^{-1}}$): $\Delta_\text{sub}H(\mathrm{Mg})=148$, $\Delta_{i}H_{1}=738$, $\Delta_{i}H_{2}=1451$, $\Delta_\text{bond}H(\mathrm{Cl{-}Cl})=242$, $\Delta_{eg}H(\mathrm{Cl})=-349$.
(a) $\mathrm{Mg(s)+\tfrac12Cl_{2}(g)\rightarrow MgCl(s)}$: $\Delta_{f}H^{\circ}=148+738+121+(-349)-753=-95\ \mathrm{kJ\,mol^{-1}}$. On its own MgCl looks stable with respect to the elements.
(b) By Hess's law, $\Delta H=\Delta_{f}H^{\circ}(\mathrm{MgCl_{2}})+\Delta_{f}H^{\circ}(\mathrm{Mg})-2\Delta_{f}H^{\circ}(\mathrm{MgCl})=-641+0-2(-95)=-451\ \mathrm{kJ\,mol^{-1}}$. Strongly exothermic: MgCl would disproportionate into Mg and $\mathrm{MgCl_{2}}$, so it cannot be kept.
(c) $\mathrm{Mg(s)+Cl_{2}(g)\rightarrow MgCl_{2}(s)}$: steps $148+738+1451+242+2(-349)=1881$; $\Delta_\text{lattice}H=1881-(-641)=+2522\ \mathrm{kJ\,mol^{-1}}$.
Reason The second ionisation costs $1451\ \mathrm{kJ\,mol^{-1}}$, but the lattice of the small, doubly charged $\mathrm{Mg^{2+}}$ ion is more than three times stronger ($2522$ vs $753$) — a gain of about $1770$, which more than pays. A third electron, however, would come from the $2p$ core ($\Delta_{i}H_{3}=7733\ \mathrm{kJ\,mol^{-1}}$), and no lattice can repay that: $\mathrm{Mg^{3+}}$ compounds do not exist.
Moral The octet "prediction" $\mathrm{Mg^{2+}}$ is really an energy result: the ion charge is the one that makes the whole cycle most exothermic.

In the Born–Haber Cycle Builder select $\mathrm{MgO}$. Roughly how large is its lattice enthalpy compared with that of $\mathrm{NaCl}$ ($788\ \mathrm{kJ\,mol^{-1}}$)?

Select $\mathrm{MgO}$ and read: steps to gaseous ions $+3243\ \mathrm{kJ\,mol^{-1}}$, $\Delta_{f}H^{\circ}=-601.6\ \mathrm{kJ\,mol^{-1}}$, lattice enthalpy $3844.6\ \mathrm{kJ\,mol^{-1}}$ — about $4.9$ times that of $\mathrm{NaCl}$ ($787.8$). The charge product is $4$ instead of $1$, and the ions are also smaller ($r_{0}=212$ against $283\ \mathrm{pm}$), which adds roughly another third. Watch the diagram: for $\mathrm{MgO}$ the climb to the gaseous ions is huge (two ionisations and the positive second electron gain), and only the enormous lattice step brings the energy back below the elements.
Interactive 2 — Born–Haber Cycle Builder

Choose a compound. Press Play (or drag the step slider) to build its Born–Haber cycle as an energy-level diagram: upward arrows (red) cost energy, downward arrows (blue) release it. The last arrows are lattice formation, $-\Delta_\text{lattice}H$, and the overall $\Delta_{f}H^{\circ}$ (purple). For real compounds the lab calculates the lattice enthalpy from the measured $\Delta_{f}H^{\circ}$; for the two hypothetical compounds it uses an estimated lattice enthalpy and calculates $\Delta_{f}H^{\circ}$ instead. Values in $\mathrm{kJ\,mol^{-1}}$.

all
steps to gaseous ions—
lattice enthalpy—
$\Delta_f H^\circ$—
current step—
⚠️ JEE Main traps

1. The sign of the lattice enthalpy. Here (as in NCERT and JEE Main) lattice enthalpy is the energy to separate the solid into gaseous ions, $+788\ \mathrm{kJ\,mol^{-1}}$ for NaCl. Some books define a "lattice energy" for the reverse process, $-788$. Read the definition in the question; in the cycle, lattice formation always enters as a negative term.

2. Half or whole bond enthalpy. For $\mathrm{NaCl}$ only half a mole of $\mathrm{Cl_{2}}$ is atomised ($\tfrac12\times242$); for $\mathrm{MgCl_{2}}$ or $\mathrm{CaCl_{2}}$ a whole mole ($242$), and the electron gain enthalpy is counted twice. Match every step to the formula.

3. Standard states. Start from the element as it exists at $298\ \mathrm{K}$ and 1 bar: Br₂ is a liquid (add vaporisation), I₂ a solid (add sublimation), the metal a solid (add sublimation, not just ionisation).

4. Second electron gain enthalpies are positive. $\Delta_{eg}H_{2}(\mathrm{O})\approx+798\ \mathrm{kJ\,mol^{-1}}$. Writing it as negative is the commonest error in oxide cycles.

5. "Ionic = noble-gas configuration" is not a law. $\mathrm{Fe^{3+}}$, $\mathrm{Zn^{2+}}$, $\mathrm{Cu^{+}}$, $\mathrm{Ag^{+}}$ and $\mathrm{Pb^{2+}}$ are stable ions without one; and an octet count does not tell you whether a compound is stable — the energy cycle does.

In the Born–Haber cycle for $\mathrm{CaCl_{2}(s)}$, how does the electron gain enthalpy of chlorine enter the sum?

Exercises

All enthalpies are in $\mathrm{kJ\,mol^{-1}}$ at $298\ \mathrm{K}$. Lattice enthalpy is the enthalpy of separating one mole of solid into gaseous ions (positive). Ionic radii ($\mathrm{pm}$): $\mathrm{Li^{+}}$ 76, $\mathrm{Na^{+}}$ 102, $\mathrm{K^{+}}$ 138, $\mathrm{Mg^{2+}}$ 72, $\mathrm{F^{-}}$ 133, $\mathrm{Cl^{-}}$ 181, $\mathrm{O^{2-}}$ 140.

I
Lewis symbols, ions and the octet rule.
  • 1 Draw the Lewis symbols of K, Ca, Ga, N, Se and Br, and state each element's usual valence.
  • 2 Write the electronic configurations of $\mathrm{Mg^{2+}}$, $\mathrm{S^{2-}}$, $\mathrm{Cr^{3+}}$ and $\mathrm{Ag^{+}}$. Which of them have a noble-gas configuration?
  • 3 How many of these molecules have an octet on every atom other than hydrogen: $\mathrm{BF_{3}}$, $\mathrm{NCl_{3}}$, $\mathrm{PCl_{5}}$, $\mathrm{OF_{2}}$, $\mathrm{NO}$, $\mathrm{CO_{2}}$, $\mathrm{ClO_{2}}$, $\mathrm{BeCl_{2}}$ (gas)?
  • 4 How many electrons are transferred in forming one formula unit of $\mathrm{Al_{2}O_{3}}$ from its atoms? And of $\mathrm{Mg_{3}N_{2}}$?
  • 5 State the electrovalency of each element in $\mathrm{Ca_{3}N_{2}}$, $\mathrm{K_{2}S}$ and $\mathrm{AlF_{3}}$.
  • 6 How many electrons surround the central atom in $\mathrm{IF_{7}}$? Classify the molecule.
  • 7 Find the total number of valence electrons in $\mathrm{ClO_{2}}$ and explain why it cannot obey the octet rule.
  • 8 Explain why nitrogen forms $\mathrm{NCl_{3}}$ but never $\mathrm{NCl_{5}}$, whereas phosphorus forms both $\mathrm{PCl_{3}}$ and $\mathrm{PCl_{5}}$.
1 Dots: K 1, Ca 2, Ga 3, N 5, Se 6, Br 7. Usual valences: K 1, Ca 2, Ga 3, N 3, Se 2, Br 1 (electrons lost for metals; electrons needed to complete the octet for non-metals).
2 $\mathrm{Mg^{2+}}$: $1s^{2}2s^{2}2p^{6}$ $[\mathrm{Ne}]$; $\mathrm{S^{2-}}$: $[\mathrm{Ne}]3s^{2}3p^{6}$ $=[\mathrm{Ar}]$; $\mathrm{Cr^{3+}}$: $[\mathrm{Ar}]3d^{3}$; $\mathrm{Ag^{+}}$: $[\mathrm{Kr}]4d^{10}$. Only $\mathrm{Mg^{2+}}$ and $\mathrm{S^{2-}}$ have noble-gas configurations; $\mathrm{Ag^{+}}$ has a full $d$ subshell ("pseudo-noble-gas" or 18-electron configuration).
3 $\mathrm{NCl_{3}}$ (8), $\mathrm{OF_{2}}$ (O: 2 bonds + 2 lone pairs = 8) and $\mathrm{CO_{2}}$ (two double bonds = 8) obey it: 3. $\mathrm{BF_{3}}$ (6) and $\mathrm{BeCl_{2}}$ (4) are incomplete; $\mathrm{PCl_{5}}$ (10) expanded; $\mathrm{NO}$ (11) and $\mathrm{ClO_{2}}$ (19) odd-electron.
4 $\mathrm{Al_{2}O_{3}}$: two Al atoms each lose 3 electrons, three O atoms each gain 2: 6 electrons. $\mathrm{Mg_{3}N_{2}}$: $3\times2=2\times3=6$ electrons.
5 $\mathrm{Ca_{3}N_{2}}$: Ca 2, N 3. $\mathrm{K_{2}S}$: K 1, S 2. $\mathrm{AlF_{3}}$: Al 3, F 1.
6 Seven $\mathrm{I{-}F}$ bonds: $7\times2=$ 14 electrons around iodine — an expanded octet (iodine is in period 5).
7 $7+2\times6=$ 19, an odd number: the electrons cannot all be paired, so at least one atom has an odd count (Cl has 7 or 9 depending on how the structure is drawn). $\mathrm{ClO_{2}}$ is a paramagnetic free radical.
8 To form five bonds N would need ten electrons around it, but its valence shell ($n=2$) has only $2s$ and $2p$ orbitals — room for eight. Phosphorus ($n=3$) has vacant $3d$ orbitals and can hold ten.
II
Energetics of ion formation (use $E_\text{Coulomb}=-1389\,z_{+}z_{-}/r\ \mathrm{kJ\,mol^{-1}}$ with $r$ in Å; ignore repulsion). Data: $\Delta_{i}H$: Li 520, Na 496, K 419, Mg 738 (first), 1451 (second); $\Delta_{eg}H$: F $-328$, Cl $-349$.
  • 1 Calculate $\Delta H$ for $\mathrm{K(g)+Cl(g)\rightarrow K^{+}(g)+Cl^{-}(g)}$.
  • 2 Calculate $\Delta H$ for $\mathrm{Na(g)+F(g)\rightarrow Na^{+}(g)+F^{-}(g)}$.
  • 3 Calculate $\Delta H$ for $\mathrm{Mg(g)+2Cl(g)\rightarrow Mg^{2+}(g)+2Cl^{-}(g)}$.
  • 4 Find the Coulomb energy of a $\mathrm{Li^{+}F^{-}}$ ion pair at contact.
  • 5 Hence find the net energy of forming the $\mathrm{Li^{+}F^{-}}$ pair from the gaseous atoms.
  • 6 Arrange Cs, Na, Mg and Al in order of increasing tendency to form ionic chlorides, and give the reason.
  • 7 The third ionisation enthalpy of calcium is $4912\ \mathrm{kJ\,mol^{-1}}$. Explain why no compound contains $\mathrm{Ca^{3+}}$, although $\mathrm{Ca^{2+}}$ compounds are very stable.
  • 8 Explain why chlorine forms $\mathrm{Cl^{-}}$ in ionic compounds but never $\mathrm{Cl^{2-}}$.
1 $419-349=+70\ \mathrm{kJ\,mol^{-1}}$.
2 $496-328=+168\ \mathrm{kJ\,mol^{-1}}$ — fluorine releases less energy on electron gain than chlorine (its small $2p$ subshell is crowded).
3 $738+1451+2(-349)=2189-698=+1491\ \mathrm{kJ\,mol^{-1}}$.
4 $r_{0}=76+133=209\ \mathrm{pm}=2.09\ \text{Å}$: $E=-1389/2.09=-665\ \mathrm{kJ\,mol^{-1}}$.
5 Cost $520-328=+192$; net $192-665=-473\ \mathrm{kJ\,mol^{-1}}$. The small ions give the strongest attraction of all the alkali halides.
6 $\mathrm{Al}\lt\mathrm{Mg}\lt\mathrm{Na}\lt\mathrm{Cs}$. The total ionisation enthalpy needed to form the cation falls in this order (Al must lose three electrons, Mg two, Na and Cs one, Cs's from a much larger orbit), so the electropositive character — and the ionic nature of the chloride — rises. $\mathrm{AlCl_{3}}$ is in fact largely covalent.
7 The third electron would come from the $3p^{6}$ core, close to the nucleus: $4912\ \mathrm{kJ\,mol^{-1}}$. The extra lattice enthalpy gained by a $3+$ ion could not repay this, so the Born–Haber cycle for any $\mathrm{Ca^{3+}}$ salt is strongly endothermic.
8 $\mathrm{Cl^{-}}$ already has the configuration of argon. A second electron would have to enter the next shell ($4s$), far from the nucleus and repelled by the negative ion — a very large positive electron gain enthalpy that no lattice repays.
III
Born–Haber calculations.
  • 1 Find the lattice enthalpy of LiF: $\Delta_\text{sub}H(\mathrm{Li})=161$, $\Delta_{i}H(\mathrm{Li})=520$, $\Delta_\text{bond}H(\mathrm{F{-}F})=158$, $\Delta_{eg}H(\mathrm{F})=-328$, $\Delta_{f}H^{\circ}(\mathrm{LiF})=-616$.
  • 2 Find $\Delta_{f}H^{\circ}(\mathrm{KCl})$ given $\Delta_\text{lattice}H(\mathrm{KCl})=717$, $\Delta_\text{sub}H(\mathrm{K})=89$, $\Delta_{i}H(\mathrm{K})=419$, $\Delta_\text{bond}H(\mathrm{Cl{-}Cl})=242$, $\Delta_{eg}H(\mathrm{Cl})=-349$.
  • 3 Find the lattice enthalpy of $\mathrm{CaCl_{2}}$: $\Delta_\text{sub}H(\mathrm{Ca})=178$, $\Delta_{i}H_{1}=590$, $\Delta_{i}H_{2}=1145$, $\Delta_\text{bond}H(\mathrm{Cl{-}Cl})=242$, $\Delta_{eg}H(\mathrm{Cl})=-349$, $\Delta_{f}H^{\circ}(\mathrm{CaCl_{2}})=-796$.
  • 4 Find $\Delta_{eg}H$ of iodine from NaI: $\Delta_\text{sub}H(\mathrm{Na})=108$, $\Delta_{i}H(\mathrm{Na})=496$, $\Delta_\text{sub}H(\mathrm{I_{2},s})=62$, $\Delta_\text{bond}H(\mathrm{I{-}I})=151$, $\Delta_\text{lattice}H(\mathrm{NaI})=704$, $\Delta_{f}H^{\circ}(\mathrm{NaI})=-288$.
  • 5 Find the first ionisation enthalpy of caesium from CsF: $\Delta_\text{sub}H(\mathrm{Cs})=76$, $\Delta_\text{bond}H(\mathrm{F{-}F})=158$, $\Delta_{eg}H(\mathrm{F})=-328$, $\Delta_\text{lattice}H(\mathrm{CsF})=756$, $\Delta_{f}H^{\circ}(\mathrm{CsF})=-554$.
  • 6 For the hypothetical $\mathrm{NaCl_{2}}$ ($\mathrm{Na^{2+}}$ ions) take $\Delta_{i}H_{2}(\mathrm{Na})=4562$ and an estimated lattice enthalpy of $2500$. With the NaCl data of Example 3, find $\Delta_{f}H^{\circ}(\mathrm{NaCl_{2}})$.
  • 7 Using the data of Example 3, find $\Delta H$ for $\mathrm{Na(s)+\tfrac12Cl_{2}(g)\rightarrow Na^{+}(g)+Cl^{-}(g)}$, and state which steps of the NaCl cycle are endothermic and which exothermic.
  • 8 Write, with state symbols, all the steps of the Born–Haber cycle for $\mathrm{Al_{2}O_{3}(s)}$ (no numbers needed), stating how many times each atomic quantity is used.
1 Steps: $161+520+79-328=432$; $\Delta_\text{lattice}H=432-(-616)=$ $1048\ \mathrm{kJ\,mol^{-1}}$.
2 $\Delta_{f}H^{\circ}=89+419+121-349-717=$ $-437\ \mathrm{kJ\,mol^{-1}}$.
3 Whole Cl–Cl bond, two electron gains: $178+590+1145+242-698=1457$; $\Delta_\text{lattice}H=1457+796=$ $2253\ \mathrm{kJ\,mol^{-1}}$.
4 Iodine is a solid: $\tfrac12(62)+\tfrac12(151)=106.5$. $-288=108+496+106.5+\Delta_{eg}H-704$, so $\Delta_{eg}H=-288-710.5+704=$ $-294.5\ \mathrm{kJ\,mol^{-1}}$.
5 $-554=76+\Delta_{i}H+79-328-756$, so $\Delta_{i}H=-554+756-76-79+328=$ $375\ \mathrm{kJ\,mol^{-1}}$ — the lowest first ionisation enthalpy of any stable element.
6 $108.4+495.8+4562+242+2(-348.6)-2500=+2211\ \mathrm{kJ\,mol^{-1}}$. Hugely endothermic: the second electron of sodium comes from the $2p$ core, and even a large lattice enthalpy cannot repay it. Sodium forms only $\mathrm{Na^{+}}$.
7 $108.4+495.8+121-348.6=+376.6\ \mathrm{kJ\,mol^{-1}}$. Endothermic: sublimation, ionisation, dissociation. Exothermic: electron gain ($-348.6$) and lattice formation ($-787.8$).
8 $\mathrm{2Al(s)\rightarrow2Al(g)}$ ($2\Delta_\text{sub}H$); $\mathrm{2Al(g)\rightarrow2Al^{3+}(g)+6e^{-}}$ ($2(\Delta_{i}H_{1}+\Delta_{i}H_{2}+\Delta_{i}H_{3})$); $\mathrm{\tfrac32O_{2}(g)\rightarrow3O(g)}$ ($\tfrac32\Delta_\text{bond}H$); $\mathrm{3O(g)+6e^{-}\rightarrow3O^{2-}(g)}$ ($3(\Delta_{eg}H_{1}+\Delta_{eg}H_{2})$); $\mathrm{2Al^{3+}(g)+3O^{2-}(g)\rightarrow Al_{2}O_{3}(s)}$ ($-\Delta_\text{lattice}H$). Their sum is $\mathrm{2Al(s)+\tfrac32O_{2}(g)\rightarrow Al_{2}O_{3}(s)}$, $\Delta_{f}H^{\circ}$.
IV
Lattice enthalpy: trends and applications.
  • 1 Arrange LiF, NaF, KF and CsF in order of decreasing lattice enthalpy, and explain.
  • 2 Arrange NaF, NaCl, NaBr and NaI in order of decreasing lattice enthalpy and of decreasing melting point.
  • 3 The lattice enthalpies of NaF and MgO are $932$ and $3845\ \mathrm{kJ\,mol^{-1}}$. Calculate their ratio and explain why it is close to 4.
  • 4 Use $\Delta_\text{lattice}H\propto z_{+}z_{-}/(r_{+}+r_{-})$ and $\Delta_\text{lattice}H(\mathrm{NaF})=932$ to estimate the lattice enthalpy of KF (same structure).
  • 5 Explain why MgO melts at about $2850\ ^{\circ}\mathrm{C}$ but NaCl at $801\ ^{\circ}\mathrm{C}$, although both have the same crystal structure.
  • 6 Which has the larger lattice enthalpy in each pair: (a) CaO or CaS, (b) KCl or CaCl$_{2}$, (c) $\mathrm{Al_{2}O_{3}}$ or MgO? Give one reason each.
  • 7 The hypothetical compound CaF (containing $\mathrm{Ca^{+}}$) has an estimated $\Delta_{f}H^{\circ}=-280\ \mathrm{kJ\,mol^{-1}}$, and $\Delta_{f}H^{\circ}(\mathrm{CaF_{2}})=-1228\ \mathrm{kJ\,mol^{-1}}$. Find $\Delta H$ for $\mathrm{2CaF(s)\rightarrow Ca(s)+CaF_{2}(s)}$ and comment.
  • 8 The Coulomb energy of one $\mathrm{Na^{+}Cl^{-}}$ pair at contact is about $-491\ \mathrm{kJ\,mol^{-1}}$, yet the lattice enthalpy of NaCl is $788\ \mathrm{kJ\,mol^{-1}}$. Explain the difference.
1 $\mathrm{LiF}\gt\mathrm{NaF}\gt\mathrm{KF}\gt\mathrm{CsF}$: same charges, and the cation grows down the group, so $r_{+}+r_{-}$ increases and the attraction weakens.
2 Lattice enthalpy: $\mathrm{NaF}\gt\mathrm{NaCl}\gt\mathrm{NaBr}\gt\mathrm{NaI}$ (anion grows). Melting points follow the same order ($996$, $801$, $747$, $661\ ^{\circ}\mathrm{C}$).
3 $3845/932=$ $4.13$. The charge product is $2\times2=4$ for MgO against $1\times1$ for NaF, and the interionic distances are similar ($212$ and $235\ \mathrm{pm}$) because the ions are isoelectronic with neon; the slightly smaller distance in MgO raises the ratio a little above 4.
4 $r_{0}(\mathrm{NaF})=235$, $r_{0}(\mathrm{KF})=271\ \mathrm{pm}$: $932\times\dfrac{235}{271}=$ $808\ \mathrm{kJ\,mol^{-1}}$ (the Born–Haber value is about $820$; the simple proportionality is only an estimate).
5 Melting requires the ions to be partly freed from the lattice. MgO has doubly charged ions at a shorter distance, so its lattice enthalpy is nearly five times that of NaCl ($3845$ vs $788$).
6 (a) CaO: $\mathrm{O^{2-}}$ is smaller than $\mathrm{S^{2-}}$. (b) $\mathrm{CaCl_{2}}$: $\mathrm{Ca^{2+}}$ is doubly charged (and the formula has three ions). (c) $\mathrm{Al_{2}O_{3}}$: $\mathrm{Al^{3+}}$ has a higher charge and smaller radius than $\mathrm{Mg^{2+}}$.
7 $\Delta H=-1228+0-2(-280)=$ $-668\ \mathrm{kJ\,mol^{-1}}$. CaF would disproportionate at once, just as MgCl does (Example 6): the higher lattice enthalpy of $\mathrm{Ca^{2+}}$ salts more than repays the second ionisation enthalpy.
8 In the crystal each $\mathrm{Na^{+}}$ is surrounded by six $\mathrm{Cl^{-}}$ at $283\ \mathrm{pm}$, twelve $\mathrm{Na^{+}}$ farther away, eight more $\mathrm{Cl^{-}}$ beyond, and so on. Adding all these attractions and repulsions gives about $1.75$ times the single-pair value; the short-range repulsion of the electron clouds then takes off roughly a tenth, leaving $788\ \mathrm{kJ\,mol^{-1}}$.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The correct order of lattice enthalpy is (A) $\mathrm{NaCl}\gt\mathrm{MgO}\gt\mathrm{NaF}\gt\mathrm{KCl}$ (B) $\mathrm{MgO}\gt\mathrm{NaCl}\gt\mathrm{NaF}\gt\mathrm{KCl}$ (C) $\mathrm{MgO}\gt\mathrm{NaF}\gt\mathrm{NaCl}\gt\mathrm{KCl}$ (D) $\mathrm{NaF}\gt\mathrm{MgO}\gt\mathrm{KCl}\gt\mathrm{NaCl}$

Charge first MgO has the charge product $4$; the other three have $1$, so MgO is first by far.
Then size Among the 1 : 1 halides, $r_{+}+r_{-}$: NaF $235$, NaCl $283$, KCl $319\ \mathrm{pm}$. Smaller distance, larger lattice enthalpy: $\mathrm{NaF}\gt\mathrm{NaCl}\gt\mathrm{KCl}$ ($932\gt788\gt717$).
Answer (C).
⏱ Shortcut Sort by $z_{+}z_{-}$ first, then by $r_{+}+r_{-}$ only within the same charge product.

E2. JEE Main · Numerical For calcium oxide: $\Delta_\text{sub}H(\mathrm{Ca})=178$, $\Delta_{i}H_{1}(\mathrm{Ca})=590$, $\Delta_{i}H_{2}(\mathrm{Ca})=1145$, $\Delta_\text{bond}H(\mathrm{O{=}O})=498$, $\Delta_{eg}H_{1}(\mathrm{O})=-141$, $\Delta_{eg}H_{2}(\mathrm{O})=+798$ and $\Delta_{f}H^{\circ}(\mathrm{CaO,s})=-635$, all in $\mathrm{kJ\,mol^{-1}}$. The lattice enthalpy of CaO, in $\mathrm{kJ\,mol^{-1}}$, is ______. Give the answer to the nearest integer.

Steps $\mathrm{Ca(s)+\tfrac12O_{2}(g)\rightarrow CaO(s)}$: $178+590+1145+\tfrac12(498)-141+798=178+590+1145+249-141+798=2819\ \mathrm{kJ\,mol^{-1}}$.
Solve $\Delta_\text{lattice}H=2819-(-635)=3454\ \mathrm{kJ\,mol^{-1}}$.
Answer $3454$.
⏱ Shortcut Lattice enthalpy $=$ (everything uphill to the gaseous ions) $+\,|\Delta_{f}H^{\circ}|$ for any exothermic compound. Sense check: a little below MgO ($3845$) because $\mathrm{Ca^{2+}}$ is larger.

E3. JEE Main · MCQ Which of the following does not favour the formation of an ionic compound between a metal M and a non-metal X? (A) low ionisation enthalpy of M (B) large negative electron gain enthalpy of X (C) high lattice enthalpy of the compound (D) high ionisation enthalpy of M

Energy balance Ionisation of M is an uphill step of the cycle; electron gain by X and lattice formation are downhill. (A), (B) and (C) each make the overall $\Delta_{f}H^{\circ}$ more negative.
(D) A high ionisation enthalpy raises the cost of the cation and works against ionic bonding — such metals (Be, Al in many compounds) tend to form covalent bonds instead.
Answer (D).

E4. JEE Main · Numerical For rubidium chloride, $\Delta_{f}H^{\circ}(\mathrm{RbCl,s})=-435$, $\Delta_\text{lattice}H=+692$, $\Delta_\text{sub}H(\mathrm{Rb})=+81$, $\Delta_{i}H(\mathrm{Rb})=+403$ and $\Delta_\text{bond}H(\mathrm{Cl{-}Cl})=+242\ \mathrm{kJ\,mol^{-1}}$. The magnitude of the electron gain enthalpy of chlorine, in $\mathrm{kJ\,mol^{-1}}$, is ______. Give the answer to the nearest integer.

Cycle $-435=81+403+\tfrac12(242)+\Delta_{eg}H-692=605+\Delta_{eg}H-692$.
Solve $\Delta_{eg}H=-435-605+692=-348\ \mathrm{kJ\,mol^{-1}}$; magnitude $348$.
Answer $348$.
⏱ Shortcut $\Delta_{eg}H=\Delta_{f}H^{\circ}+\Delta_\text{lattice}H-(\text{sum of the other uphill steps})$. Half the Cl–Cl bond enthalpy, not the whole.

E5. JEE Main · MCQ In which set does every species violate the octet rule? (A) $\mathrm{BCl_{3}}$, $\mathrm{NO}$, $\mathrm{PCl_{5}}$ (B) $\mathrm{CO_{2}}$, $\mathrm{NO}$, $\mathrm{SF_{6}}$ (C) $\mathrm{BeCl_{2}}$, $\mathrm{NH_{3}}$, $\mathrm{XeF_{2}}$ (D) $\mathrm{H_{2}O}$, $\mathrm{NO_{2}}$, $\mathrm{IF_{7}}$

Check each $\mathrm{BCl_{3}}$: 6 on B (incomplete). $\mathrm{NO}$: 11 electrons (odd). $\mathrm{PCl_{5}}$: 10 on P (expanded). All three violate it.
Others $\mathrm{CO_{2}}$ (B), $\mathrm{NH_{3}}$ (C) and $\mathrm{H_{2}O}$ (D) obey the octet rule, so those sets fail.
Answer (A).
⏱ Shortcut Find one octet-obeying species in a set and discard it — here $\mathrm{CO_{2}}$, $\mathrm{NH_{3}}$, $\mathrm{H_{2}O}$ eliminate three options at once.

E6. JEE Main · Numerical How many of the following ions have a noble-gas electronic configuration? $\mathrm{Na^{+}}$, $\mathrm{Fe^{3+}}$, $\mathrm{Zn^{2+}}$, $\mathrm{S^{2-}}$, $\mathrm{Cu^{+}}$, $\mathrm{Al^{3+}}$, $\mathrm{Sc^{3+}}$, $\mathrm{Pb^{2+}}$. Give the answer to the nearest integer.

Yes $\mathrm{Na^{+}}$ $[\mathrm{Ne}]$, $\mathrm{S^{2-}}$ $[\mathrm{Ar}]$, $\mathrm{Al^{3+}}$ $[\mathrm{Ne}]$, $\mathrm{Sc^{3+}}$ $[\mathrm{Ar}]$.
No $\mathrm{Fe^{3+}}$ $[\mathrm{Ar}]3d^{5}$; $\mathrm{Zn^{2+}}$ and $\mathrm{Cu^{+}}$ $[\mathrm{Ar}]3d^{10}$ (18-electron, pseudo-noble-gas); $\mathrm{Pb^{2+}}$ $[\mathrm{Xe}]4f^{14}5d^{10}6s^{2}$.
Answer $4$.
⏱ Shortcut A main-group ion whose charge equals its number of valence electrons (cation) or the number needed to reach 8 (anion) has a noble-gas core; $\mathrm{Sc^{3+}}$ is the one d-block ion of this kind here.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. How well does the simple electrostatic picture — lattice enthalpy proportional to $z_{+}z_{-}/(r_{+}+r_{-})$ — reproduce the lattice enthalpies obtained from Born–Haber cycles, and for which compounds does it fail?

Why it matters. Lattice enthalpies guide the search for new materials: solid electrolytes for safer lithium batteries, ceramic coatings for turbine blades, and salts for thermal energy storage in solar power plants. Materials scientists screen thousands of candidate compounds by computing lattice energies before anyone makes them. A model that fails tells us something too: a large gap between the electrostatic estimate and the Born–Haber value signals that the bonding is not purely ionic.

What to do.

  1. From a reliable thermochemical table (for example the NIST Chemistry WebBook or a data handbook), collect $\Delta_{f}H^{\circ}$, sublimation, ionisation, bond and electron gain enthalpies for the twenty alkali-metal halides (Li–Cs, F–I) and for AgF, AgCl, AgBr and AgI.
  2. Run the Born–Haber cycle for each in a spreadsheet to obtain $\Delta_\text{lattice}H$ (remember the states of $\mathrm{Br_{2}}$ and $\mathrm{I_{2}}$).
  3. Collect ionic radii from one consistent table and plot $\Delta_\text{lattice}H$ against $1/(r_{+}+r_{-})$ for the alkali halides. Fit a straight line through the origin.
  4. Add the silver halides to the plot and compare them with the line.

Tools: A spreadsheet, a thermochemical data table and a table of ionic radii.

Hand in: Your table of cycle-derived lattice enthalpies, the graph with the fitted line, and a paragraph explaining which compounds lie off the line and why.

Going further. The silver halides should lie above the line — their Born–Haber lattice enthalpies are larger than the electrostatic picture predicts. Read ahead to Fajans' rules in Section 3.2 and explain the extra stability in terms of partial covalent character.

Instructor note: the alkali halides fall close to one line (within a few per cent for the sodium and potassium salts; LiI and the caesium salts deviate because of size mismatch and, for CsCl, CsBr and CsI, a different crystal structure). The silver halides typically lie 8–15 % above the line, the gap growing from AgF to AgI — a clean quantitative signature of polarisation.

🧪 Self-check quiz

0/5 correct

Q1. Kossel's electron-transfer approach is best suited to explaining the bonding in

Q2. The lattice enthalpy of NaCl is

Q3. Which compound has the highest lattice enthalpy?

Q4. Which quantity is not needed to calculate the lattice enthalpy of KCl by a Born–Haber cycle?

Q5. In which molecule does the central atom have fewer than eight valence electrons?