15.3 Alkynes
A carbon–carbon triple bond makes alkynes linear, makes the hydrogen on a terminal ≡C–H weakly acidic, and lets two molecules of reagent add one after the other. Structure, naming, preparation from calcium carbide and dihalides, acetylide tests, and additions of hydrogen, halogens, HX and water — with Lindlar versus sodium–ammonia, Markovnikov twice, and enol → carbonyl.
An oxy-acetylene torch cuts through a steel plate in seconds: burning ethyne in pure oxygen gives a flame of about $3000^{\circ}\mathrm{C}$, hotter than almost any other fuel gas. A century ago miners and cyclists lit their way with carbide lamps, in which water dripped onto lumps of calcium carbide and the ethyne released burned with a bright white flame. Both uses come from the same feature — a carbon–carbon triple bond, which stores a great deal of energy in a small, linear molecule.
For a chemist the triple bond is also a tool. Its two π bonds can be used one at a time (to make an alkene of chosen geometry) or both together; the hydrogen on a terminal triple bond can be pulled off as a proton, turning the alkyne into a carbon nucleophile that builds longer chains; and water adds across it to make aldehydes and ketones. In this section we explain all of this from the $sp$ hybridisation of the carbon atoms, using the electronic effects and reaction types of Chapter 14 and the alkene chemistry of Section 15.2.
Structure, isomerism and nomenclature
Alkynes are hydrocarbons that contain at least one carbon–carbon triple bond. Open-chain alkynes with one triple bond form a homologous series of general formula $\mathrm{C_{n}H_{2n-2}}$ ($n\ge2$): ethyne $\mathrm{C_{2}H_{2}}$ (common name acetylene), propyne $\mathrm{C_{3}H_{4}}$, butynes $\mathrm{C_{4}H_{6}}$, …
In a terminal alkyne the triple bond is at the end of the chain, so one triple-bonded carbon carries a hydrogen: $\mathrm{R{-}C{\equiv}C{-}H}$. In an internal alkyne both triple-bonded carbons carry carbon groups: $\mathrm{R{-}C{\equiv}C{-}R'}$. Ethyne itself, $\mathrm{H{-}C{\equiv}C{-}H}$, has two "terminal" hydrogens.
Bonding in the triple bond. Each triple-bonded carbon is $sp$ hybridised. Its two $sp$ hybrid orbitals (50% $s$ character) point in exactly opposite directions; one overlaps head-on with the $sp$ orbital of the other carbon to form the C–C σ bond, the other forms the σ bond to H (or to the next carbon). The two remaining $p$ orbitals on each carbon are at right angles to the bond axis and to each other; they overlap sideways in pairs to form two π bonds in perpendicular planes. The two π clouds merge into a cylinder of electron density wrapped round the C–C axis.
So a triple bond is one σ + two π bonds, and the $\mathrm{H{-}C{\equiv}C}$ unit is linear ($180^{\circ}$). Ethyne contains $3$ σ bonds and $2$ π bonds. Because three electron pairs are shared and the $sp$ orbitals are compact, the C≡C bond is the shortest and strongest carbon–carbon bond: $120\ \mathrm{pm}$ and $823\ \mathrm{kJ\,mol^{-1}}$, against $134\ \mathrm{pm}$, $681\ \mathrm{kJ\,mol^{-1}}$ for C=C and $154\ \mathrm{pm}$, $348\ \mathrm{kJ\,mol^{-1}}$ for C–C. The $sp$ C–H bond ($106\ \mathrm{pm}$) is also shorter than an $sp^{3}$ C–H bond ($109\ \mathrm{pm}$). Note that $823$ is less than three times $348$: each π bond is weaker than the σ bond, which is why alkynes, like alkenes, undergo addition reactions.
- Position isomerism begins at $\mathrm{C_{4}H_{6}}$: but-1-yne $\mathrm{CH_{3}CH_{2}C{\equiv}CH}$ and but-2-yne $\mathrm{CH_{3}C{\equiv}CCH_{3}}$.
- Chain isomerism begins at $\mathrm{C_{5}H_{8}}$: pent-1-yne and 3-methylbut-1-yne have different carbon skeletons.
- Functional isomerism: the formula $\mathrm{C_{n}H_{2n-2}}$ (two degrees of unsaturation) is shared by dienes, cycloalkenes and bicyclic alkanes — e.g. $\mathrm{C_{4}H_{6}}$ is also buta-1,3-diene, buta-1,2-diene, cyclobutene and methylenecyclopropane.
- No geometrical (cis–trans) isomerism about the triple bond: each triple-bonded carbon has only one other group, and the unit is linear. (An alkyne can still show optical isomerism if a stereocentre is present elsewhere, e.g. 3-methylpent-1-yne.)
The number of open-chain alkyne isomers grows quickly: $\mathrm{C_{4}H_{6}}$ has $2$, $\mathrm{C_{5}H_{8}}$ has $3$ and $\mathrm{C_{6}H_{10}}$ has $7$.
IUPAC names. Take the longest chain that contains the triple bond, replace the -ane of the alkane by -yne, and number the chain so that the triple-bonded carbons get the lowest locant; substituents are named and numbered as for alkanes. If the chain contains both a double and a triple bond, the name ends in -en-…-yne (the e of ene is dropped before a vowel); the multiple bonds together get the lowest set of locants, and only if there is still a tie does the double bond get the lower number.
| Structure | IUPAC name | Note |
|---|---|---|
| $\mathrm{HC{\equiv}CH}$ | ethyne | acetylene |
| $\mathrm{CH_{3}{-}C{\equiv}CH}$ | propyne | terminal |
| $\mathrm{CH_{3}{-}C{\equiv}C{-}CH_{2}{-}CH_{3}}$ | pent-2-yne | internal, unsymmetrical |
| $\mathrm{(CH_{3})_{2}CH{-}C{\equiv}CH}$ | 3-methylbut-1-yne | chain isomer of pent-1-yne |
| $\mathrm{(CH_{3})_{3}C{-}C{\equiv}CH}$ | 3,3-dimethylbut-1-yne | terminal, $\mathrm{C_{6}H_{10}}$ |
| $\mathrm{CH_{2}{=}CH{-}CH_{2}{-}C{\equiv}CH}$ | pent-1-en-4-yne | locants $\{1,4\}$ either way; tie → double bond first |
| $\mathrm{CH_{3}{-}CH{=}CH{-}C{\equiv}CH}$ | pent-3-en-1-yne | $\{1,3\}$ beats $\{2,4\}$ |
How many σ and π bonds are there in propyne, $\mathrm{CH_{3}{-}C{\equiv}CH}$?
Preparation; acidic character of terminal alkynes
Ethyne from calcium carbide. Industrially and in the laboratory, ethyne is made by adding water to calcium carbide. The carbide itself is made by heating quicklime (from limestone) with coke in an electric furnace at about $2300\ \mathrm{K}$:
$$\mathrm{CaCO_{3}(s)\xrightarrow{\ \Delta\ }CaO(s)+CO_{2}(g)}$$ $$\mathrm{CaO(s)+3C(s)\xrightarrow{\text{electric furnace}}CaC_{2}(s)+CO(g)}$$ $$\mathrm{CaC_{2}(s)+2H_{2}O(l)\rightarrow Ca(OH)_{2}(aq)+C_{2}H_{2}(g)}$$Calcium carbide is ionic, $\mathrm{Ca^{2+}[C{\equiv}C]^{2-}}$; the acetylide (ethynide) ion $\mathrm{C_{2}^{2-}}$ is an extremely strong base and takes two protons from water. Which hydrocarbon a carbide gives depends on its anion: aluminium carbide contains $\mathrm{C^{4-}}$ and gives methane, while magnesium carbide $\mathrm{Mg_{2}C_{3}}$ contains $\mathrm{C_{3}^{4-}}$ and gives propyne:
$$\mathrm{Al_{4}C_{3}(s)+12H_{2}O(l)\rightarrow4Al(OH)_{3}(s)+3CH_{4}(g)}$$ $$\mathrm{Mg_{2}C_{3}(s)+4H_{2}O(l)\rightarrow2Mg(OH)_{2}(s)+CH_{3}C{\equiv}CH(g)}$$From vicinal dihalides — double dehydrohalogenation. A vicinal dihalide has the two halogens on adjacent carbons; it is obtained by adding $\mathrm{Br_{2}}$ to an alkene (Section 15.2). Two molecules of HX are removed in two elimination steps. The first, giving a vinyl (alkenyl) halide, goes with alcoholic KOH; the second is much harder — the halogen on an $sp^{2}$ carbon is held more firmly (partial double-bond character) — and needs the very strong base sodamide, $\mathrm{NaNH_{2}}$:
$$\mathrm{BrCH_{2}{-}CH_{2}Br+KOH\xrightarrow{\text{ethanol},\ \Delta}CH_{2}{=}CHBr+KBr+H_{2}O}$$ $$\mathrm{CH_{2}{=}CHBr+NaNH_{2}\rightarrow HC{\equiv}CH+NaBr+NH_{3}}$$Since vicinal dihalides come from alkenes, this is the standard way to turn an alkene into an alkyne: alkene $\xrightarrow{\mathrm{Br_{2}}}$ vicinal dibromide $\xrightarrow{\text{alc. KOH; then }\mathrm{NaNH_{2}}}$ alkyne. A geminal dihalide (both halogens on one carbon, e.g. $\mathrm{CH_{3}CHBr_{2}}$) gives the same alkyne in the same way.
Why a terminal ≡C–H is acidic. When a C–H bond loses $\mathrm{H^{+}}$, the electron pair stays on carbon as a carbanion. The more $s$ character in the orbital holding that pair, the closer the pair is to the nucleus, the more stable the anion — and the more acidic the C–H bond. An $sp$ orbital is $50\%$ $s$, against $33\%$ for $sp^{2}$ and $25\%$ for $sp^{3}$; the $sp$ carbon is effectively more electronegative.
Acidity of C–H bonds increases with the $s$ character of the carbon orbital:
$$\mathrm{HC{\equiv}CH\ (p}K_{a}\approx25)\gt\mathrm{CH_{2}{=}CH_{2}\ (p}K_{a}\approx44)\gt\mathrm{CH_{3}{-}CH_{3}\ (p}K_{a}\approx50)$$Ethyne is still a much weaker acid than water ($\mathrm{p}K_{a}=15.7$) or ethanol ($\approx16$), but a stronger acid than ammonia ($\approx38$). An acid–base reaction goes to the side of the weaker acid, with $\log K=\mathrm{p}K_{a}(\text{acid formed})-\mathrm{p}K_{a}(\text{acid used})$. Hence:
- sodium metal and sodamide convert terminal alkynes into sodium alkynides (acetylides): $$\mathrm{2HC{\equiv}CH+2Na\rightarrow2HC{\equiv}C^{-}Na^{+}+H_{2}}$$ $$\mathrm{HC{\equiv}CH+NaNH_{2}\rightarrow HC{\equiv}C^{-}Na^{+}+NH_{3}}$$
- hydroxide and ethoxide do not (their conjugate acids, water and ethanol, are stronger acids than ethyne), and water destroys an acetylide: $$\mathrm{HC{\equiv}C^{-}Na^{+}+H_{2}O\rightarrow HC{\equiv}CH+NaOH}$$
- alkyl groups (+I) make the anion less stable, so $\mathrm{HC{\equiv}CH}$ is slightly more acidic than $\mathrm{CH_{3}C{\equiv}CH}$; internal alkynes have no ≡C–H and show no acidic behaviour.
Heavy-metal acetylides: tests for a terminal alkyne. With ammoniacal silver nitrate (Tollens' reagent) a terminal alkyne gives a white precipitate of a silver alkynide, and with ammoniacal copper(I) chloride a red-brown precipitate of the copper(I) compound:
$$\mathrm{HC{\equiv}CH+2[Ag(NH_{3})_{2}]^{+}\rightarrow AgC{\equiv}CAg\downarrow+2NH_{4}^{+}+2NH_{3}}$$ $$\mathrm{HC{\equiv}CH+2[Cu(NH_{3})_{2}]^{+}\rightarrow CuC{\equiv}CCu\downarrow+2NH_{4}^{+}+2NH_{3}}$$ $$\mathrm{R{-}C{\equiv}CH+[Ag(NH_{3})_{2}]^{+}\rightarrow R{-}C{\equiv}C{-}Ag\downarrow+NH_{4}^{+}+NH_{3}}$$Internal alkynes, alkenes and alkanes give no precipitate, so these reagents distinguish but-1-yne from but-2-yne. The alkyne can be recovered by warming the precipitate with dilute acid. (Dry heavy-metal acetylides are shock-sensitive explosives and are never kept.)
Alkynide ions build carbon chains. An alkynide ion is a strong nucleophile. With a primary alkyl halide it substitutes the halogen, joining a new carbon chain onto the triple bond — a way to make higher (internal) alkynes from ethyne:
$$\mathrm{HC{\equiv}C^{-}Na^{+}+CH_{3}Br\rightarrow HC{\equiv}C{-}CH_{3}+NaBr}$$Secondary and tertiary halides are not used: the strongly basic alkynide removes HX from them (elimination) instead.
- Bromine water / bromine in $\mathrm{CCl_{4}}$ (red-brown colour discharged) or cold dilute alkaline $\mathrm{KMnO_{4}}$ (purple → brown) — given by alkenes and alkynes, not by alkanes or benzene.
- Ammoniacal $\mathrm{AgNO_{3}}$ (white ppt) or ammoniacal $\mathrm{Cu_{2}Cl_{2}}$ (red-brown ppt) — terminal alkynes only.
- Sodium metal gives $\mathrm{H_{2}}$ with terminal alkynes (and with alcohols, acids and water — keep the sample dry).
- To tell two internal alkynes apart, look at their products: hydration (one or two ketones) or the amount of $\mathrm{Br_{2}}$ or $\mathrm{H_{2}}$ taken up per gram.
In the proton-transfer ladder choose the acid ethyne and the base hydroxide ion. Which way does $\mathrm{HC{\equiv}CH+OH^{-}\rightleftharpoons HC{\equiv}C^{-}+H_{2}O}$ lie?
Which pair can be distinguished by ammoniacal silver nitrate?
Addition reactions and polymerisation
Like alkenes, alkynes react mainly by addition across the π bonds, and because there are two π bonds a reagent can add once (giving an alkene derivative) or twice (giving a saturated product). Towards most electrophiles alkynes are somewhat less reactive than alkenes: the π electrons are held more tightly by the $sp$ carbons, and the vinyl-type carbocation formed by attack on an alkyne is less stable than an alkyl carbocation. So bromine decolourises more slowly with ethyne than with ethene.
1. Hydrogen. With finely divided Pt, Pd or Ni, alkynes take up two moles of hydrogen and give alkanes; the alkene formed first is hydrogenated further on the same surface. To stop at the alkene, the catalyst must be made less active ("poisoned"). Two reagents give the two possible geometries:
- Lindlar's catalyst (palladium on calcium carbonate or barium sulphate, partly poisoned with lead acetate and quinoline) with $\mathrm{H_{2}}$: one mole of $\mathrm{H_{2}}$ adds; both H atoms are delivered from the metal surface to the same face of the alkyne (syn addition), so an internal alkyne gives the cis-alkene. The poisoned surface binds the alkene too weakly to reduce it further.
- Sodium in liquid ammonia (at about $200\ \mathrm{K}$): an internal alkyne gives the trans-alkene. Electrons from sodium and protons from ammonia are added one at a time; the intermediate radical and anion can adjust their shape, and they adopt the less crowded arrangement with the two alkyl groups on opposite sides (overall anti addition).
- A terminal alkyne with sodium in liquid ammonia simply loses its acidic proton and gives the sodium alkynide (Rule 15.18).
- Complete hydrogenation (Pt, Pd or Ni, excess $\mathrm{H_{2}}$): $\mathrm{R{-}C{\equiv}C{-}R'+2H_{2}\rightarrow R{-}CH_{2}{-}CH_{2}{-}R'}$.
2. Halogens. Bromine (in $\mathrm{CCl_{4}}$, or as bromine water) adds in two stages; the red-brown colour disappears, which is a test for unsaturation:
$$\mathrm{HC{\equiv}CH\xrightarrow{\ Br_{2}\ }CHBr{=}CHBr\xrightarrow{\ Br_{2}\ }CHBr_{2}{-}CHBr_{2}}$$The first addition is mainly anti, giving the (E)- (trans) 1,2-dibromoalkene; the second gives a 1,1,2,2-tetrabromoalkane. One mole of an alkyne with one triple bond decolourises two moles of $\mathrm{Br_{2}}$. Chlorine reacts in the same way.
3. Hydrogen halides — Markovnikov, twice. HX ($\mathrm{HI\gt HBr\gt HCl}$ in reactivity) adds in two steps by the electrophilic mechanism of Section 15.2. In each step $\mathrm{H^{+}}$ goes to the carbon that gives the more stable carbocation, and $\mathrm{X^{-}}$ joins the cationic carbon. For a terminal alkyne:
$$\mathrm{CH_{3}{-}C{\equiv}CH\xrightarrow{\ HBr\ }CH_{3}{-}CBr{=}CH_{2}\xrightarrow{\ HBr\ }CH_{3}{-}CBr_{2}{-}CH_{3}}$$Two moles of HX add to a triple bond in the Markovnikov sense, and both halogen atoms end up on the same carbon (a geminal or gem-dihalide), the one that carried fewer hydrogens. Reason for the second step: protonating the vinyl halide $\mathrm{CH_{3}{-}CBr{=}CH_{2}}$ at the $\mathrm{CH_{2}}$ end gives the cation $\mathrm{CH_{3}{-}\overset{+}{C}Br{-}CH_{3}}$, in which bromine's lone pair stabilises the positive charge by resonance ($\mathrm{{-}\overset{+}{C}{-}\ddot{Br}\leftrightarrow{-}C{=}\overset{+}{Br}}$, $+M$ outweighing $-I$ here). Ethyne gives 1,1-dihaloethane; an unsymmetrical internal alkyne gives a mixture of two gem-dihalides.
In the presence of a peroxide, HBr (only HBr) adds to a terminal alkyne by the free-radical route in the anti-Markovnikov sense, as with alkenes (peroxide effect, Section 15.2).
4. Water — hydration to carbonyl compounds. Alkynes do not react with water alone, but in the presence of mercury(II) sulphate and dilute sulphuric acid at about $333\ \mathrm{K}$, one molecule of water adds (Markovnikov). The product, with OH on a doubly bonded carbon, is an enol (ene + ol). Enols are unstable: they rearrange at once to the isomeric carbonyl compound by moving a hydrogen from O to C — keto–enol tautomerism. The carbonyl form wins because a C=O bond plus a C–H bond is more stable than a C=C bond plus an O–H bond.
- Ethyne is the only alkyne that gives an aldehyde (ethanal).
- Every other terminal alkyne gives a methyl ketone, $\mathrm{R{-}CO{-}CH_{3}}$ (OH goes to the carbon carrying R).
- A symmetrical internal alkyne gives one ketone (but-2-yne → butanone; hex-3-yne → hexan-3-one); an unsymmetrical internal alkyne gives a mixture of two (pent-2-yne → pentan-2-one + pentan-3-one).
5. Polymerisation. Alkynes join to themselves in two ways.
- Cyclic polymerisation (trimerisation). When ethyne is passed through a red-hot iron tube at $873\ \mathrm{K}$, three molecules join into a six-membered ring: benzene. Propyne gives 1,3,5-trimethylbenzene (mesitylene), and but-2-yne gives hexamethylbenzene. This links the aliphatic and aromatic worlds (Section 15.4).
- Linear polymerisation. With $\mathrm{Cu_{2}Cl_{2}}$ and $\mathrm{NH_{4}Cl}$, two molecules of ethyne combine to vinylacetylene (but-1-en-3-yne), $\mathrm{2HC{\equiv}CH\rightarrow CH_{2}{=}CH{-}C{\equiv}CH}$, used to make the synthetic rubber neoprene. With special (Ziegler–Natta type) catalysts ethyne gives long chains of polyacetylene $\mathrm{({-}CH{=}CH{-})_{n}}$, whose alternating double bonds make it conduct electricity when doped — the discovery recognised by the 2000 Nobel Prize in Chemistry.
In the alkyne reaction explorer choose pent-2-yne and H₂O, HgSO₄ / dil. H₂SO₄. How many products appear, and how many C–C π bonds are left between the two former alkyne carbons?
1. "Hydroxide makes acetylides." It does not: water (p$K_{a}$ 15.7) is a far stronger acid than ethyne (25). Use Na or $\mathrm{NaNH_{2}}$; and water destroys any acetylide formed.
2. Precipitate tests need a ≡C–H. Ammoniacal $\mathrm{AgNO_{3}}$ / $\mathrm{Cu_{2}Cl_{2}}$, Na and $\mathrm{NaNH_{2}}$ react only with terminal alkynes. But-2-yne, pent-2-yne and all alkenes give no precipitate.
3. Hydration products. Only ethyne gives an aldehyde. Propyne gives propanone, not propanal; an unsymmetrical internal alkyne gives two ketones.
4. Gem, not vic. 2 HX → both X on the same carbon (Markovnikov twice). Vicinal dihalides come from $\mathrm{X_{2}}$ addition to alkenes, and are used to make alkynes.
5. Lindlar vs sodium–ammonia. Lindlar → cis (syn); Na/liq. $\mathrm{NH_{3}}$ → trans (anti). With a terminal alkyne, Na/liq. $\mathrm{NH_{3}}$ removes the proton instead. And carbides: $\mathrm{CaC_{2}}$ → ethyne, $\mathrm{Al_{4}C_{3}}$ → methane, $\mathrm{Mg_{2}C_{3}}$ → propyne.
Propyne is treated with $\mathrm{HgSO_{4}}$ in dilute $\mathrm{H_{2}SO_{4}}$. The product is
Exercises
Atomic masses: H 1, C 12, O 16, Ca 40, Br 80, Ag 108. Molar volume at STP $22.7\ \mathrm{L\,mol^{-1}}$.
- 1 How many σ bonds and how many π bonds are there in (a) ethyne, (b) propyne?
- 2 Give the hybridisation of each carbon in $\mathrm{CH_{2}{=}CH{-}C{\equiv}CH}$. How many carbons are $sp$ hybridised?
- 3 Name $\mathrm{CH_{3}{-}C{\equiv}C{-}CH(CH_{3}){-}CH_{3}}$.
- 4 Name $\mathrm{HC{\equiv}C{-}CH_{2}{-}CH{=}CH_{2}}$ and $\mathrm{CH_{3}{-}CH{=}CH{-}C{\equiv}CH}$.
- 5 Draw the structure of 4,4-dimethylpent-2-yne and of 3-ethylhex-1-yne.
- 6 How many open-chain alkynes have the formula $\mathrm{C_{6}H_{10}}$? Name them.
- 7 How many of the alkynes in part 6 are terminal?
- 8 Which $\mathrm{C_{6}H_{10}}$ alkyne is chiral? Explain.
- 9 Find the degree of unsaturation of $\mathrm{C_{6}H_{10}}$ and name one isomer that is not an alkyne.
- 1 Write balanced equations for the preparation of ethyne starting from limestone and coke.
- 2 What volume of ethyne at STP is obtained from $12.8\ \mathrm{g}$ of pure calcium carbide?
- 3 What mass of 1,2-dibromopropane ($\mathrm{C_{3}H_{6}Br_{2}}$) is needed to prepare $4.00\ \mathrm{g}$ of propyne, assuming complete conversion?
- 4 In part 3, why is alcoholic KOH enough for the first elimination but $\mathrm{NaNH_{2}}$ needed for the second?
- 5 $2.60\ \mathrm{g}$ of ethyne reacts with sodium to form monosodium acetylide. What volume of hydrogen at STP is evolved?
- 6 Find $\log K$ for $\mathrm{HC{\equiv}CH+C_{2}H_{5}O^{-}\rightleftharpoons HC{\equiv}C^{-}+C_{2}H_{5}OH}$ ($\mathrm{p}K_{a}$: ethyne 25, ethanol 16).
- 7 Arrange in order of decreasing acidity: $\mathrm{CH_{2}{=}CH_{2}}$, $\mathrm{HC{\equiv}CH}$, $\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, $\mathrm{CH_{3}{-}CH_{3}}$.
- 8 Give a test to distinguish pent-1-yne from pent-2-yne. What mass of precipitate does $3.40\ \mathrm{g}$ of pent-1-yne give with excess ammoniacal $\mathrm{AgNO_{3}}$?
- 1 Give the product of but-1-yne with (a) $\mathrm{H_{2}}$/Lindlar's catalyst, (b) excess $\mathrm{H_{2}}$/Pt.
- 2 How many moles of $\mathrm{H_{2}}$ are needed to saturate 1 mol of $\mathrm{CH_{2}{=}CH{-}C{\equiv}CH}$ completely?
- 3 Give the product of propyne with excess HCl and explain its orientation.
- 4 Name the product of ethyne with 2 mol of HBr. Is it the same as the product of ethene with $\mathrm{Br_{2}}$?
- 5 How many different ketones are obtained on hydration ($\mathrm{HgSO_{4}/H_{2}SO_{4}}$) of hex-2-yne? Name them.
- 6 What mass of bromine is needed to convert $2.00\ \mathrm{g}$ of propyne completely into the tetrabromide?
- 7 Is there a $\mathrm{C_{5}H_{8}}$ alkyne whose hydration gives pentan-3-one as the only product? Explain.
- 8 Which alkyne gives an aldehyde on hydration? Write the equation with the intermediate enol.
- 9 Propyne ($12.0\ \mathrm{g}$) is passed through a red-hot iron tube; $50\%$ is converted into 1,3,5-trimethylbenzene. What mass of the arene forms?
- 1 Convert ethene into but-2-yne, giving reagents for each step.
- 2 An alkyne A, $\mathrm{C_{5}H_{8}}$, gives a white precipitate with ammoniacal $\mathrm{AgNO_{3}}$ and on hydration gives 3-methylbutan-2-one. Identify A.
- 3 An alkyne X, $\mathrm{C_{4}H_{6}}$, gives no precipitate with ammoniacal $\mathrm{Cu_{2}Cl_{2}}$; Lindlar reduction gives cis-but-2-ene. Identify X and give the product of X with 2 mol HBr.
- 4 (Welding) Write the equation for complete combustion of ethyne. What volume of oxygen is needed to burn $1.0\ \mathrm{L}$ of ethyne (same temperature and pressure)?
- 5 (Welding) The enthalpy of combustion of ethyne is $-1300\ \mathrm{kJ\,mol^{-1}}$. How much heat is released by burning $13.0\ \mathrm{g}$ of ethyne?
- 6 Two molecules of ethyne combine (with $\mathrm{Cu_{2}Cl_{2}/NH_{4}Cl}$). Name the product and count its π bonds.
- 7 Convert propene into propanone through an alkyne.
E1. JEE Main · MCQ Which of the following reagents will not convert ethyne into its sodium salt to any appreciable extent? (A) sodium metal (B) sodamide in liquid ammonia (C) aqueous sodium hydroxide (D) sodium hydride in an ether
E2. JEE Main · Numerical Ethyne generated from a sample of pure calcium carbide is just enough to decolourise $320\ \mathrm{g}$ of bromine, forming 1,1,2,2-tetrabromoethane. Find the mass of calcium carbide used, in grams ($\mathrm{Ca}=40$, $\mathrm{C}=12$, $\mathrm{Br}=80$). Give the answer to the nearest integer.
E3. JEE Main · MCQ 4-Methylpent-2-yne is warmed with dilute sulphuric acid containing mercury(II) sulphate. The product is (A) only 4-methylpentan-2-one (B) only 2-methylpentan-3-one (C) a mixture of 4-methylpentan-2-one and 2-methylpentan-3-one (D) 4-methylpentanal
E4. JEE Main · Numerical $5.40\ \mathrm{g}$ of an open-chain alkyne $\mathrm{C_{n}H_{2n-2}}$ adds exactly $32.0\ \mathrm{g}$ of bromine to give a saturated tetrabromide. Find $n$ ($\mathrm{C}=12$, $\mathrm{H}=1$, $\mathrm{Br}=80$). Give the answer to the nearest integer.
E5. JEE Main · MCQ Propyne is treated with $\mathrm{NaNH_{2}}$ in liquid ammonia and then with bromoethane, giving X. X is reduced with $\mathrm{H_{2}}$ over Lindlar's catalyst to give Y. Y is (A) trans-pent-2-ene (B) cis-pent-2-ene (C) pentane (D) pent-1-ene
E6. JEE Main · Numerical How many of the following give a white precipitate with ammoniacal silver nitrate: ethyne, propyne, but-2-yne, pent-1-yne, 3-methylbut-1-yne, hex-3-yne, phenylethyne ($\mathrm{C_{6}H_{5}C{\equiv}CH}$), buta-1,3-diene? Give the answer to the nearest integer.
Research question. Why do food-safety regulators allow ethene (ethylene) but ban calcium carbide for ripening fruit, and how much gas does a carbide "ripening sachet" really release?
Why it matters. Ethene is the plant hormone that triggers ripening; controlled ethylene chambers are used in many countries. Calcium carbide releases ethyne, which mimics ethene only weakly, and industrial carbide carries phosphide and arsenic impurities that give toxic phosphine and arsine with water. In India its use for ripening is prohibited under food-safety regulations, yet enforcement drives still seize carbide-ripened mangoes and bananas every summer.
What to do.
- From reliable sources (food-safety authorities, agricultural universities) find the ethylene concentration (in ppm) and exposure time recommended for ripening bananas or mangoes in a chamber.
- A typical illegal practice uses about $10\ \mathrm{g}$ of carbide per box. Assume $80\%$ $\mathrm{CaC_{2}}$ and compute the moles and the volume of ethyne at room temperature ($24.5\ \mathrm{L\,mol^{-1}}$).
- For a $20\ \mathrm{L}$ box, convert this to a concentration in ppm by volume and compare it with the ethylene dose from step 1. What does the comparison suggest about how the sachets are used?
- Write balanced equations for calcium phosphide and calcium arsenide (as $\mathrm{Ca_{3}P_{2}}$, $\mathrm{Ca_{3}As_{2}}$) reacting with water, and find the exposure limits of the gases formed.
- List the tell-tale signs consumers are told to look for in artificially ripened fruit, and judge which have a chemical basis.
Tools: Web sources from regulators and universities, a calculator or spreadsheet. No experiment — carbide and its impurity gases are hazardous.
Hand in: A one-page brief with your calculations (moles, volume, ppm), the two balanced equations, and a short recommendation for a market inspector.
Going further. Ethyne and ethene differ by one π bond. Why might a receptor protein that binds ethene respond far more weakly to ethyne? Think about shape (linear vs planar) and the metal ion at the receptor site.
🧪 Self-check quiz
Q1. The hybridisation of the carbon atoms in ethyne and the H–C–C bond angle are
Q2. Ethyne is passed into dilute sulphuric acid containing $\mathrm{HgSO_{4}}$ at $333\ \mathrm{K}$. The organic product is
Q3. Which is the strongest acid?
Q4. Hex-3-yne is converted into trans-hex-3-ene by
Q5. Propyne reacts with excess HBr in the absence of peroxide. The product is