Chapter 12 · Coordination Compounds

12.1 Werner's Theory, Ligands and IUPAC Nomenclature

A metal ion holds a fixed number of molecules or anions — its ligands — inside a coordination sphere, and keeps other ions loosely outside. Werner's two valencies explain why some chloride precipitates with silver nitrate and some does not; the coordination number, the oxidation state and the IUPAC name all follow from reading the bracket correctly.

Mix cobalt(III) chloride with excess ammonia and you can isolate a beautiful yellow-orange solid of composition $\mathrm{CoCl_{3}\cdot 6NH_{3}}$. Nineteenth-century chemists were puzzled by it. Cobalt chloride and ammonia are both stable compounds with their valencies satisfied — so what holds six more ammonia molecules to the cobalt, so firmly that boiling with dilute acid does not remove them? And why does a closely related purple solid, $\mathrm{CoCl_{3}\cdot 5NH_{3}}$, release only two of its three chlorides as $\mathrm{AgCl}$ when silver nitrate is added, while the yellow one releases all three?

The answer, given by Alfred Werner in 1893, founded a whole branch of chemistry. The metal ion holds a definite number of groups — the ligands — directly bonded to it in a fixed arrangement in space, and other ions sit outside this group as ordinary counter-ions. Such coordination compounds are everywhere: haemoglobin carries oxygen with an iron complex, chlorophyll traps light with a magnesium complex, vitamin $\mathrm{B_{12}}$ is a cobalt complex, cisplatin treats cancer, and EDTA softens hard water by wrapping up calcium ions. In this section we learn Werner's theory and the evidence for it, the vocabulary of ligands, denticity and chelation, how to find the coordination number and oxidation state of the central atom, and the IUPAC rules for naming complexes and writing formulas from names. Isomerism follows in Section 12.2 and bonding in Section 12.3.

Double salts, complexes and Werner's theory

Many compounds are formed by combining two or more stable compounds in a fixed ratio. They fall into two quite different classes, and the difference shows up as soon as the compound is dissolved in water.

📘 Definition 12.1 — Double salt and coordination compound

A double salt is a compound formed from two simple salts in a fixed ratio that exists only in the solid (crystal) state; in water it dissociates completely into the simple ions of both salts. Examples: Mohr's salt $\mathrm{FeSO_{4}\cdot (NH_{4})_{2}SO_{4}\cdot 6H_{2}O}$, potash alum $\mathrm{K_{2}SO_{4}\cdot Al_{2}(SO_{4})_{3}\cdot 24H_{2}O}$, carnallite $\mathrm{KCl\cdot MgCl_{2}\cdot 6H_{2}O}$.

A coordination compound (complex compound) contains a complex ion or neutral coordination entity — a central metal atom or ion bonded to a fixed set of ions or molecules — that keeps its identity in solution and does not break up into the simple ions. Example: $\mathrm{K_{4}[Fe(CN)_{6}]}$ dissolves as $4\mathrm{K^{+}}$ and $\mathrm{[Fe(CN)_{6}]^{4-}}$.

The test is chemical. A solution of Mohr's salt gives every test of its parts: $\mathrm{Fe^{2+}}$ (a blue precipitate with potassium hexacyanidoferrate(III)), $\mathrm{NH_{4}^{+}}$ (ammonia gas on warming with $\mathrm{NaOH}$) and $\mathrm{SO_{4}^{2-}}$ (white $\mathrm{BaSO_{4}}$ with $\mathrm{BaCl_{2}}$). A solution of $\mathrm{K_{4}[Fe(CN)_{6}]}$, although it contains iron(II) and cyanide, gives neither a test for $\mathrm{Fe^{2+}}$ nor one for $\mathrm{CN^{-}}$: both are locked inside $\mathrm{[Fe(CN)_{6}]^{4-}}$. (That is why the salt is nowhere near as poisonous as $\mathrm{KCN}$.) The square brackets in a formula enclose exactly the part that stays together.

Werner studied the cobalt(III) chloride–ammonia compounds and the platinum(IV) chloride–ammonia compounds. He measured two things: how many moles of $\mathrm{AgCl}$ precipitate at once, in the cold, when excess silver nitrate is added to one mole of each compound, and the molar conductivity of a dilute solution, which grows with the number of ions a formula unit releases. (Freezing-point depressions, which count all particles, told the same story.)

CompositionColourmol $\mathrm{AgCl}$ per mol$\Lambda_m$ / $\mathrm{S\,cm^{2}\,mol^{-1}}$ (approx.)Ions per formula unitWerner formula
$\mathrm{CoCl_{3}\cdot 6NH_{3}}$yellow-orange3≈ 4304$\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$
$\mathrm{CoCl_{3}\cdot 5NH_{3}}$purple2≈ 2603$\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$
$\mathrm{CoCl_{3}\cdot 4NH_{3}}$green and violet forms1≈ 1002$\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$
$\mathrm{CoCl_{3}\cdot 3NH_{3}}$—0≈ 00 (non-electrolyte)$\mathrm{[CoCl_{3}(NH_{3})_{3}]}$

Two facts stand out. First, the number of ammonia molecules plus the number of chlorides that do not precipitate is always $6$. Second, the green and violet forms of $\mathrm{CoCl_{3}\cdot 4NH_{3}}$ have the same composition and the same chemical tests but different colours — they must differ in the arrangement of the groups around the cobalt (they are the cis and trans isomers of Section 12.2). Werner explained both facts with two kinds of valency.

📐 Rule 12.1 — Werner's theory of coordination compounds
  1. In a coordination compound a metal shows two kinds of valency (combining power): primary valency and secondary valency.
  2. The primary valency is ionisable. It corresponds to the oxidation state of the metal and is satisfied by negative ions only. In $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$ the primary valency of cobalt is $3$.
  3. The secondary valency is non-ionisable. It equals the coordination number — the number of groups bonded directly to the metal — and is fixed for a given metal ion (6 for $\mathrm{Co^{3+}}$, $\mathrm{Cr^{3+}}$ and $\mathrm{Pt^{4+}}$; 4 for $\mathrm{Pt^{2+}}$, $\mathrm{Pd^{2+}}$ and usually $\mathrm{Cu^{2+}}$). It is satisfied by neutral molecules or negative ions.
  4. A negative ion inside the coordination sphere (such as the $\mathrm{Cl}$ in $\mathrm{[CoCl(NH_{3})_{5}]^{2+}}$) satisfies a primary and a secondary valency at the same time, and it is not ionisable.
  5. The secondary valencies are directed in space, so each complex has a definite geometry: octahedral for coordination number 6, tetrahedral or square planar for 4.
✏️ Example 1 — Werner's platinum(IV) series
Platinum(IV) chloride forms five ammine compounds, $\mathrm{PtCl_{4}\cdot xNH_{3}}$ with $x=6,5,4,3,2$. Their molar conductivities in dilute solution are roughly $520$, $400$, $230$, $100$ and $0\ \mathrm{S\,cm^{2}\,mol^{-1}}$. Platinum(IV) has coordination number 6. Write the Werner formula of each compound, the number of ions it gives per formula unit and the number of moles of $\mathrm{AgCl}$ one mole precipitates with excess $\mathrm{AgNO_{3}}$.
Idea Six positions around Pt: $x$ are taken by $\mathrm{NH_{3}}$, so $6-x$ chlorides must be inside. The remaining $4-(6-x)=x-2$ chlorides are outside, ionisable, and precipitate as $\mathrm{AgCl}$. The entity carries charge $+(x-2)$.
Formulas $x=6$: $\mathrm{[Pt(NH_{3})_{6}]Cl_{4}}$ (5 ions, 4 AgCl); $x=5$: $\mathrm{[PtCl(NH_{3})_{5}]Cl_{3}}$ (4 ions, 3); $x=4$: $\mathrm{[PtCl_{2}(NH_{3})_{4}]Cl_{2}}$ (3 ions, 2); $x=3$: $\mathrm{[PtCl_{3}(NH_{3})_{3}]Cl}$ (2 ions, 1); $x=2$: $\mathrm{[PtCl_{4}(NH_{3})_{2}]}$ (no ions, 0).
Check The conductivities fall in the same order as the ion counts, $5\gt4\gt3\gt2\gt0$, and the last compound is a non-electrolyte, as its near-zero conductivity demands. Each Werner formula keeps Pt at $+4$: e.g. $x+2(-1)=+2$ gives $x=+4$ for $\mathrm{[PtCl_{2}(NH_{3})_{4}]^{2+}}$.
✏️ Example 2 — Weighing the silver chloride
A solution of $2.504\ \mathrm{g}$ of the purple compound $\mathrm{CoCl_{3}\cdot 5NH_{3}}$ is treated with excess silver nitrate in the cold. What mass of $\mathrm{AgCl}$ precipitates? (Molar masses: Co $58.9$, Cl $35.5$, N $14.0$, H $1.0$, Ag $107.9\ \mathrm{g\,mol^{-1}}$.)
Find the mass of $\mathrm{AgCl}$ before you open the solution:
Moles $M=58.9+3(35.5)+5(17.0)=250.4\ \mathrm{g\,mol^{-1}}$, so $n=\dfrac{2.504}{250.4}=0.0100\ \mathrm{mol}$.
Formula The compound is $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$: two ionisable chlorides per formula unit, so $0.0200\ \mathrm{mol}$ of $\mathrm{AgCl}$: $\mathrm{[CoCl(NH_{3})_{5}]^{2+}(aq) + 2Cl^{-}(aq) + 2Ag^{+}(aq) \rightarrow [CoCl(NH_{3})_{5}]^{2+}(aq) + 2AgCl(s)}$.
Mass $M(\mathrm{AgCl})=107.9+35.5=143.4\ \mathrm{g\,mol^{-1}}$; mass $=0.0200\times143.4=2.87\ \mathrm{g}$.
Check If you had assumed all three chlorides precipitate you would get $4.30\ \mathrm{g}$ — exactly $1.5$ times too much. The ratio of the two masses is the quickest way to spot the formula in a JEE problem.

One mole of $\mathrm{PtCl_{4}\cdot 4NH_{3}}$ (Pt(IV), coordination number 6) is dissolved and $3$ mol of $\mathrm{AgNO_{3}}$ are added. How much $\mathrm{AgCl}$ forms?

Choose $\mathrm{PtCl_{4}\cdot 4NH_{3}}$ and set the slider to $3.0$: the readouts show the Werner formula [PtCl₂(NH₃)₄]Cl₂, 3 ions per formula unit and AgCl formed: 2.0 mol per mol. The graph has already flattened at 2: once the two chlorides outside the bracket have gone, the extra $\mathrm{Ag^{+}}$ finds nothing to precipitate, because the two chlorido ligands are bonded to platinum.
Interactive 1 — Werner's Silver Nitrate Test

Pick one of Werner's compounds, then add silver nitrate (moles per mole of compound) with the slider or press Play. Chloride ions outside the bracket (green) are pulled out one by one as white $\mathrm{AgCl}$; chlorido ligands inside the bracket (amber) never move. The graph shows the moles of $\mathrm{AgCl}$ against the moles of $\mathrm{AgNO_{3}}$ added — the height of the plateau counts the ionisable chlorides.

1.5 mol
Werner formula—
ions per formula unit—
AgCl formed—
molar conductivity—

One mole of an octahedral cobalt(III) compound $\mathrm{CoCl_{3}\cdot 4NH_{3}}$ gives one mole of $\mathrm{AgCl}$ with excess silver nitrate. How many ions does one formula unit give in water?

Ligands, denticity and chelation

Werner's ideas are now expressed in the language of coordinate bonds (Unit 3): each group attached to the metal donates a lone pair into an empty orbital of the metal. The metal is a Lewis acid, the attached groups are Lewis bases. The following words describe the parts of a complex.

📘 Definition 12.2 — Coordination entity, central atom, ligands, coordination sphere
  • A coordination entity is a central metal atom or ion together with the ions or molecules bonded directly to it — everything written inside the square brackets: $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[Ni(CO)_{4}]}$, $\mathrm{[Fe(CN)_{6}]^{4-}}$. It may be a cation, an anion or neutral.
  • The central atom or ion is the atom to which the others are bonded in a definite geometry — a Lewis acid ($\mathrm{Co^{3+}}$, $\mathrm{Ni}$, $\mathrm{Fe^{2+}}$ above).
  • A ligand is an ion or molecule bound to the central atom through one or more of its atoms that donate an electron pair; these are the donor atoms (N in $\mathrm{NH_{3}}$, C in $\mathrm{CO}$ and $\mathrm{CN^{-}}$, O in $\mathrm{H_{2}O}$).
  • The coordination sphere is the central atom with its ligands, enclosed in square brackets; the ions outside are the counter ions ($\mathrm{Cl^{-}}$ in $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, $\mathrm{K^{+}}$ in $\mathrm{K_{4}[Fe(CN)_{6}]}$).

Ligands are classified by how many donor atoms each one uses to bind the same metal.

📘 Definition 12.3 — Denticity; chelating and ambidentate ligands

The denticity of a ligand is the number of donor atoms through which it binds one central atom. A ligand is unidentate (one donor atom: $\mathrm{Cl^{-}}$, $\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, $\mathrm{CN^{-}}$, $\mathrm{CO}$), didentate or bidentate (two: ethane-1,2-diamine $\mathrm{H_{2}NCH_{2}CH_{2}NH_{2}}$ (en), oxalate $\mathrm{C_{2}O_{4}^{2-}}$ (ox), glycinate $\mathrm{H_{2}NCH_{2}COO^{-}}$ (gly)) or polydentate (several: diethylenetriamine (dien) is tridentate, ethylenediaminetetraacetate $\mathrm{EDTA^{4-}}$ is hexadentate).

A di- or polydentate ligand that binds one metal through two or more donor atoms forms a ring containing the metal, called a chelate ring (Greek chele, a crab's claw); the ligand is a chelating ligand and the complex a chelate.

An ambidentate ligand has two different donor atoms but uses only one of them at a time: $\mathrm{NO_{2}^{-}}$ binds through N (nitrito-N) or through O (nitrito-O, $\mathrm{ONO^{-}}$); $\mathrm{SCN^{-}}$ through S (thiocyanato-S) or N (thiocyanato-N, $\mathrm{NCS^{-}}$); $\mathrm{CN^{-}}$ through C (cyanido) or N (isocyanido).

LigandFormulaChargeDonor atom(s)DenticityName in a complex
water$\mathrm{H_{2}O}$0O1aqua
ammonia$\mathrm{NH_{3}}$0N1ammine
carbon monoxide$\mathrm{CO}$0C1carbonyl
pyridine$\mathrm{C_{5}H_{5}N}$ (py)0N1pyridine
chloride, bromide$\mathrm{Cl^{-}}$, $\mathrm{Br^{-}}$−1Cl, Br1chlorido, bromido
cyanide$\mathrm{CN^{-}}$−1C (or N)1cyanido (isocyanido)
hydroxide, oxide$\mathrm{OH^{-}}$, $\mathrm{O^{2-}}$−1, −2O1hydroxido, oxido
nitrite$\mathrm{NO_{2}^{-}}$−1N or O1 (ambidentate)nitrito-N, nitrito-O
thiocyanate$\mathrm{SCN^{-}}$−1S or N1 (ambidentate)thiocyanato-S, thiocyanato-N
sulphate, carbonate$\mathrm{SO_{4}^{2-}}$, $\mathrm{CO_{3}^{2-}}$−2O1 (or 2)sulfato, carbonato
ethane-1,2-diamine$\mathrm{H_{2}NCH_{2}CH_{2}NH_{2}}$ (en)02 N2ethane-1,2-diamine
oxalate$\mathrm{C_{2}O_{4}^{2-}}$ (ox)−22 O2oxalato
glycinate$\mathrm{H_{2}NCH_{2}COO^{-}}$ (gly)−1N and O2glycinato
diethylenetriamine$\mathrm{HN(CH_{2}CH_{2}NH_{2})_{2}}$ (dien)03 N3diethylenetriamine
EDTA$\mathrm{EDTA^{4-}}$−42 N, 4 O6ethylenediaminetetraacetato

Why is chelation so important? Compare $\mathrm{[Ni(NH_{3})_{6}]^{2+}}$ and $\mathrm{[Ni(en)_{3}]^{2+}}$. Both have six Ni–N bonds of very similar strength, yet the second is about $10^{10}$ times more stable (its overall formation constant is about $10^{18}$ against about $10^{9}$). Adding ethane-1,2-diamine to a solution of the hexaammine complex replaces the ammonia completely.

📐 Principle 12.2 — The chelate effect

A complex in which the metal is bound by chelating ligands is more stable than a comparable complex with the same number of similar donor atoms from unidentate ligands. Two qualitative reasons:

  1. Entropy. In $\mathrm{[Ni(NH_{3})_{6}]^{2+}(aq) + 3en(aq) \rightarrow [Ni(en)_{3}]^{2+}(aq) + 6NH_{3}(aq)}$ four solute particles become seven. The bond enthalpies hardly change, but the number of free particles — and so the entropy — increases, making $\Delta G$ negative.
  2. Ring closure. Once one end of a chelating ligand is attached, its second donor atom is held close to the metal and binds easily; if one end lets go, it is likely to re-attach before the whole ligand can drift away.

Chelate rings of five or six atoms (including the metal) are the most stable: smaller rings are strained, larger ones gain less. Uses: $\mathrm{EDTA}$ titrations for water hardness ($\mathrm{Ca^{2+}}$, $\mathrm{Mg^{2+}}$), EDTA in treating lead poisoning, dimethylglyoxime for detecting $\mathrm{Ni^{2+}}$.

📘 Definition 12.4 — Coordination number and coordination polyhedron

The coordination number (CN) of the central atom is the number of ligand donor atoms bonded directly to it — equivalently, the number of coordinate (σ) bonds it forms with its ligands:

$$\text{CN}=\sum(\text{number of ligands of a kind})\times(\text{their denticity}).$$

The coordination polyhedron is the shape formed by the donor atoms around the central atom: linear (CN 2, $\mathrm{[Ag(NH_{3})_{2}]^{+}}$), tetrahedral or square planar (CN 4, $\mathrm{[Ni(CO)_{4}]}$, $\mathrm{[PtCl_{4}]^{2-}}$), trigonal bipyramidal (CN 5, $\mathrm{[Fe(CO)_{5}]}$), octahedral (CN 6, $\mathrm{[Co(NH_{3})_{6}]^{3+}}$).

A complex with only one kind of ligand is homoleptic ($\mathrm{[Co(NH_{3})_{6}]^{3+}}$); one with more than one kind is heteroleptic ($\mathrm{[CoCl_{2}(NH_{3})_{4}]^{+}}$).

✏️ Example 3 — Donor atoms, denticity and coordination number
Give the coordination number of the central atom and say which ligands chelate: (a) $\mathrm{[Co(en)_{3}]^{3+}}$; (b) $\mathrm{[Fe(C_{2}O_{4})_{3}]^{3-}}$; (c) $\mathrm{[Cu(gly)_{2}]}$; (d) $\mathrm{[Ca(EDTA)]^{2-}}$; (e) $\mathrm{[Co(NO_{2})(NH_{3})_{5}]^{2+}}$; (f) $\mathrm{[CoCl_{2}(en)(NH_{3})_{2}]^{+}}$.
(a), (b) Three didentate ligands each: CN $=3\times2=6$. Both en and oxalate chelate (three five-membered rings each).
(c) Two glycinate ions, each binding through N and O: CN $=2\times2=4$ — not 2. Glycinate is didentate with two different donor atoms used together, so it chelates; it is not ambidentate.
(d) One hexadentate $\mathrm{EDTA^{4-}}$: CN $=6$ from a single ligand, with five chelate rings.
(e), (f) (e) Five $\mathrm{NH_{3}}$ plus one $\mathrm{NO_{2}^{-}}$ (ambidentate, here bound through N): CN $=6$; no chelation. (f) $2\ \mathrm{Cl}+1\ \text{en}\,(2)+2\ \mathrm{NH_{3}}$: CN $=2+2+2=6$; only en chelates.
Rule Count donor atoms, not ligands. "Number of ligands" equals CN only when every ligand is unidentate.

Which of these ligands is ambidentate?

Oxidation state of the central atom and counting ions

The square brackets carry all the information needed to find the oxidation state of the metal: the overall charge of the entity is the sum of the metal's oxidation state and the charges of the ligands.

📘 Definition 12.5 — Oxidation state of the central atom

The oxidation state (oxidation number) of the central atom is the charge it would carry if all the ligands were removed together with the electron pairs they share with it. With $x$ the oxidation state and $q$ the charge of the coordination entity,

$$x+\sum(\text{charges of the ligands})=q .$$

Neutral ligands ($\mathrm{H_{2}O}$, $\mathrm{NH_{3}}$, $\mathrm{CO}$, py, en, dien) contribute $0$; $\mathrm{Cl^{-}}$, $\mathrm{Br^{-}}$, $\mathrm{CN^{-}}$, $\mathrm{OH^{-}}$, $\mathrm{NO_{2}^{-}}$, $\mathrm{SCN^{-}}$, gly contribute $-1$ each; $\mathrm{C_{2}O_{4}^{2-}}$, $\mathrm{SO_{4}^{2-}}$, $\mathrm{CO_{3}^{2-}}$, $\mathrm{O^{2-}}$ contribute $-2$; $\mathrm{EDTA^{4-}}$ contributes $-4$. The charge $q$ is found from the counter ions. (A special case you may meet: in $\mathrm{[Fe(CN)_{5}(NO)]^{2-}}$ the nitrosyl is counted as $\mathrm{NO^{+}}$, which makes iron $+2$.)

🧭 Problem-solving strategy — Reading a coordination formula
  1. Split the formula at the brackets: counter ions outside, coordination entity inside.
  2. Charge of the entity $q$: from the counter ions ($3\mathrm{Cl^{-}}$ outside means $q=+3$; $4\mathrm{K^{+}}$ outside means $q=-4$). If there are two complex ions, use the known oxidation state of one, or the fact that both are complexes of the same metal.
  3. Oxidation state: solve $x+\sum(\text{ligand charges})=q$.
  4. Coordination number: count donor atoms (en, ox, gly count 2; EDTA 6).
  5. Ions per formula unit = (number of counter ions) + (number of complex ions). Water of crystallisation is not an ion.
  6. Precipitation: only ions outside the bracket react — $\mathrm{Ag^{+}}$ with free $\mathrm{Cl^{-}}$, $\mathrm{Ba^{2+}}$ with free $\mathrm{SO_{4}^{2-}}$.
✏️ Example 4 — Oxidation states, charges and ions
For each compound find the charge of the coordination entity, the oxidation state and coordination number of the metal, and the number of ions per formula unit in water: (a) $\mathrm{K_{3}[Co(C_{2}O_{4})_{3}]}$; (b) $\mathrm{[CoCl_{2}(en)_{2}]_{2}SO_{4}}$; (c) $\mathrm{[Ni(CO)_{4}]}$; (d) $\mathrm{[Pt(NH_{3})_{4}][PtCl_{4}]}$.
How many ions does one formula unit of (b) give in water?
(a) Three $\mathrm{K^{+}}$ outside, so $q=-3$: $x+3(-2)=-3$, $x=+3$. CN $=3\times2=6$. Ions: $3\mathrm{K^{+}}+1$ complex anion $=4$.
(b) One $\mathrm{SO_{4}^{2-}}$ balances two complex cations, so each has $q=+1$: $x+2(-1)+2(0)=+1$, $x=+3$. CN $=2+2\times2=6$. Ions: $2+1=3$.
(c) Neutral entity, neutral ligands: $x=0$. CN $=4$ (tetrahedral). No ions — a volatile liquid that does not conduct.
(d) Two complex ions of the same metal with charges $+q$ and $-q$. For $\mathrm{[Pt(NH_{3})_{4}]^{q+}}$, $x=q$; for $\mathrm{[PtCl_{4}]^{q-}}$, $x-4=-q$. Equal oxidation states give $q=+2$: both platinum atoms are $+2$, both CN 4. Ions: $2$.
Check (d) has the same empirical formula, $\mathrm{PtCl_{2}N_{2}H_{6}}$, as the neutral molecule $\mathrm{[PtCl_{2}(NH_{3})_{2}]}$ — but (d) is built from two complex ions. A formula's empirical composition never tells you what is inside the brackets; the tests and counts above do.

What is the oxidation state of cobalt in $\mathrm{[Co(C_{2}O_{4})(en)_{2}]Cl}$?

IUPAC names and formulas of mononuclear complexes

A formula like $\mathrm{[CoCl_{2}(en)_{2}]Cl}$ and the name dichloridobis(ethane-1,2-diamine)cobalt(III) chloride carry exactly the same information. The rules below are the current IUPAC recommendations for mononuclear complexes (one central atom). JEE Main asks both directions: name from formula and formula from name.

📐 Rule 12.3 — Writing the formula
  1. Write the symbol of the central atom first.
  2. Then the ligands, in alphabetical order of their formulas or abbreviations, whatever their charge. Order by the first symbol: $\mathrm{Br}$ before $\mathrm{Cl}$ before en before $\mathrm{H_{2}O}$ before $\mathrm{NH_{3}}$ before ox; a one-letter symbol comes before a two-letter symbol with the same first letter ($\mathrm{CN}$, $\mathrm{CO}$ before $\mathrm{Cl}$).
  3. Put polyatomic ligands and abbreviations in parentheses: $\mathrm{(NH_{3})_{6}}$, $\mathrm{(CN)_{6}}$, $\mathrm{(en)_{2}}$.
  4. Enclose the entity in square brackets; give its charge, if any, as a superscript outside: $\mathrm{[Fe(CN)_{6}]^{4-}}$.
  5. In a salt write the cation first: $\mathrm{K_{4}[Fe(CN)_{6}]}$, $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, $\mathrm{[Co(NH_{3})_{6}][Cr(CN)_{6}]}$.
📐 Rule 12.4 — Naming mononuclear coordination compounds
  1. Cation first, then anion, as for any salt — whether the complex is the cation (hexaamminecobalt(III) chloride) or the anion (potassium hexacyanidoferrate(II)).
  2. Inside the entity, ligands first, in alphabetical order of their names, then the metal. Multiplying prefixes are ignored when alphabetising: tetraammine goes under "a", dichlorido under "c".
  3. Anionic ligands end in -o: chloride → chlorido, cyanide → cyanido, hydroxide → hydroxido, oxalate → oxalato, sulphate → sulfato, nitrite → nitrito. Neutral ligands keep their names (ethane-1,2-diamine, pyridine) except $\mathrm{H_{2}O}$ aqua, $\mathrm{NH_{3}}$ ammine, $\mathrm{CO}$ carbonyl, $\mathrm{NO}$ nitrosyl. Ambidentate ligands show the donor atom: nitrito-N, nitrito-O, thiocyanato-S.
  4. Number of each ligand: di-, tri-, tetra-, penta-, hexa-. If the ligand name already contains a number or is complicated (ethane-1,2-diamine), use bis-, tris-, tetrakis- and parentheses: tris(ethane-1,2-diamine).
  5. The oxidation state of the metal follows its name in Roman numerals in parentheses, with no space: cobalt(III), nickel(0).
  6. If the entity is an anion, the metal name ends in -ate: cobaltate, nickelate, chromate, zincate, platinate, aluminate; some use the Latin root: ferrate (Fe), cuprate (Cu), argentate (Ag), aurate (Au), stannate (Sn), plumbate (Pb). Cationic and neutral entities use the plain metal name.
  7. A neutral complex is one word with no counter ion: triamminetrichloridocobalt(III).

Older names (chloro, cyano, hydroxo, nitro for nitrito-N, isothiocyanato for thiocyanato-N) still appear in many books and some JEE options; recognise them, but write the -ido names.

✏️ Example 5 — From formula to name
Name: (a) $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$; (b) $\mathrm{K_{3}[Fe(C_{2}O_{4})_{3}]}$; (c) $\mathrm{[Pt(NH_{3})_{4}][PtCl_{4}]}$; (d) $\mathrm{[CrCl_{2}(H_{2}O)_{4}]NO_{3}}$; (e) $\mathrm{[Co(NO_{2})(NH_{3})_{5}]Cl_{2}}$ (N-bonded); (f) $\mathrm{Na[Ag(CN)_{2}]}$.
(a) Co: $x-1=+2$, $x=+3$. Ligands alphabetically: ammine (a) before chlorido (c): pentaamminechloridocobalt(III) chloride.
(b) Anion $\mathrm{[Fe(C_{2}O_{4})_{3}]^{3-}}$, Fe $+3$, Latin root: potassium trioxalatoferrate(III).
(c) Both Pt $+2$ (Example 4): tetraammineplatinum(II) tetrachloridoplatinate(II) — cation named first, anion with -ate.
(d) $q=+1$, so $x-2=+1$, Cr $+3$; aqua (a) before chlorido (c): tetraaquadichloridochromium(III) nitrate. (IUPAC keeps both vowels in "tetraaqua" and "pentaammine".)
(e) $q=+2$, $x-1=+2$, Co $+3$; ammine (a) before nitrito (n): pentaamminenitrito-N-cobalt(III) chloride. Its O-bonded isomer is pentaamminenitrito-O-cobalt(III) chloride.
(f) $\mathrm{[Ag(CN)_{2}]^{-}}$, Ag $+1$: sodium dicyanidoargentate(I).

Iron(II) surrounded by six cyanide ions. Before you build it, what are the formula of its potassium salt and the name?

Choose Fe²⁺ and set CN⁻ to 6 (all other ligands 0). The readouts show charge of the entity 4− ($+2+6(-1)$), CN 6, octahedral, 5 ions per formula unit and the name potassium hexacyanidoferrate(II). The entity is an anion, so iron takes its Latin "-ate" name, ferrate; the cation $\mathrm{K^{+}}$ is written and named first. $\mathrm{K_{3}[Fe(CN)_{6}]}$ is the iron(III) salt.
Interactive 2 — Complex Builder and Namer

Choose a metal ion and how many of each ligand it carries. The builder counts donor atoms (en and ox count two), finds the charge of the entity from $x+\sum q_{\text{ligand}}$, adds $\mathrm{Cl^{-}}$ or $\mathrm{K^{+}}$ counter ions, writes the formula with the ligands in IUPAC order and names the compound. Play steps through some well-known complexes.

formula—
CN and shape—
charge of entity—
ions per formula unit—
IUPAC name—
✏️ Example 6 — From name to formula, and what the formula tells you (JEE level)
Write the formulas of (a) potassium hexacyanidoferrate(II); (b) diamminesilver(I) dicyanidoargentate(I); (c) tris(ethane-1,2-diamine)cobalt(III) sulfate; (d) tetraamminediaquacobalt(III) chloride. For (c) find the number of ions per formula unit, the number of nitrogen donor atoms per formula unit, and the moles of $\mathrm{BaSO_{4}}$ precipitated when one mole is treated with excess $\mathrm{BaCl_{2}}$.
Find the number of ions given by one formula unit of (c):
(a) $\mathrm{Fe^{2+}}$ with six $\mathrm{CN^{-}}$: $q=-4$, so $\mathrm{K_{4}[Fe(CN)_{6}]}$.
(b) Cation $\mathrm{[Ag(NH_{3})_{2}]^{+}}$, anion $\mathrm{[Ag(CN)_{2}]^{-}}$: $\mathrm{[Ag(NH_{3})_{2}][Ag(CN)_{2}]}$.
(c) $\mathrm{[Co(en)_{3}]^{3+}}$ and $\mathrm{SO_{4}^{2-}}$: the lowest common multiple of 3 and 2 is 6, so $\mathrm{[Co(en)_{3}]_{2}(SO_{4})_{3}}$. Ions: $2+3=5$. N donor atoms: $2\times3\times2=12$. With $\mathrm{Ba^{2+}}$: all three sulphates are outside the brackets, so $3\ \mathrm{mol}\ \mathrm{BaSO_{4}}$.
(d) $\mathrm{Co^{3+}}$, neutral ligands, $q=+3$; formula order $\mathrm{H_{2}O}$ before $\mathrm{NH_{3}}$: $\mathrm{[Co(H_{2}O)_{2}(NH_{3})_{4}]Cl_{3}}$. Note the two orders: in the name ammine precedes aqua (a-m before a-q); in the formula $\mathrm{H_{2}O}$ precedes $\mathrm{NH_{3}}$ (H before N).
⏱ Shortcut For $\mathrm{[M]_{a}X_{b}}$ salts the ion count is simply $a+b$; never count atoms or ligands inside the bracket.
⚠️ JEE Main traps

1. Coordination number ≠ number of ligands. $\mathrm{[Co(en)_{3}]^{3+}}$ has three ligands but CN 6; $\mathrm{[Ca(EDTA)]^{2-}}$ has one ligand and CN 6.

2. Only chloride outside the bracket precipitates. One mole of $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$ gives one mole of $\mathrm{AgCl}$, not three. Water of crystallisation and ligands are not "ions".

3. Charge of the entity versus oxidation state. In $\mathrm{[CoCl(NH_{3})_{5}]^{2+}}$ the charge is $+2$ but cobalt is $+3$. Always subtract the ligand charges (oxalate $-2$, glycinate $-1$, EDTA $-4$).

4. Two alphabetical orders. Names are alphabetised by ligand name (ignoring di, tri…): tetraammineaquadichlorido…; formulas by ligand symbol: $\mathrm{[CoCl_{2}(H_{2}O)(NH_{3})_{3}]^{+}}$.

5. "-ate" only for anionic entities, with Latin roots. Potassium hexacyanidoferrate(III), not "ironate" and not "hexacyanidoiron(III)"; but hexaamminecobalt(III) — a cation keeps the plain name. Ambidentate and didentate are different ideas: $\mathrm{NO_{2}^{-}}$ is ambidentate, en is didentate.

Which is the correct IUPAC name of $\mathrm{K_{3}[Fe(CN)_{6}]}$?

Exercises

en = ethane-1,2-diamine, ox = oxalate $\mathrm{C_{2}O_{4}^{2-}}$, gly = glycinate. Molar masses: Ag $107.9$, Cl $35.5$, Br $79.9$, Ba $137.3$, S $32.1$, O $16.0\ \mathrm{g\,mol^{-1}}$.

I
Double salts and Werner's theory.
  • 1 Solutions of Mohr's salt and of $\mathrm{K_{4}[Fe(CN)_{6}]}$ both contain iron(II). Describe one test that gives a positive result with only one of them, and explain why.
  • 2 In $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, what are the primary and secondary valencies of cobalt? Which groups satisfy each?
  • 3 How many moles of $\mathrm{AgCl}$ are precipitated by excess $\mathrm{AgNO_{3}}$ from one mole of $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$?
  • 4 How many ions does one formula unit of $\mathrm{[PtCl_{2}(NH_{3})_{4}]Cl_{2}}$ give in water?
  • 5 Arrange in order of increasing molar conductivity: $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$, $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$, $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$, $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$.
  • 6 $0.10\ \mathrm{mol}$ of $\mathrm{PtCl_{4}\cdot 3NH_{3}}$ (Pt(IV), CN 6) is treated with excess $\mathrm{AgNO_{3}}$. What mass of $\mathrm{AgCl}$ forms?
  • 7 An octahedral chromium(III) compound $\mathrm{CrCl_{3}\cdot 4NH_{3}}$ releases one third of its chlorine as $\mathrm{AgCl}$. Write its Werner formula.
  • 8 Why is $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$ a non-electrolyte although it contains three chlorine atoms?
1 Add $\mathrm{K_{3}[Fe(CN)_{6}]}$ solution: Mohr's salt gives the deep blue precipitate typical of free $\mathrm{Fe^{2+}}$; $\mathrm{K_{4}[Fe(CN)_{6}]}$ gives none, because its iron is locked in $\mathrm{[Fe(CN)_{6}]^{4-}}$. (Equally: warming with $\mathrm{NaOH}$ gives $\mathrm{NH_{3}}$ only from Mohr's salt.) A double salt dissociates completely; a complex ion does not.
2 Primary valency $3$ (oxidation state), satisfied by the three $\mathrm{Cl^{-}}$; secondary valency $6$ (CN), satisfied by the six $\mathrm{NH_{3}}$.
3 $2$ mol: the two chlorides outside the bracket.
4 $\mathrm{[PtCl_{2}(NH_{3})_{4}]^{2+}+2Cl^{-}}$: $3$ ions.
5 Ions per formula unit $0\lt2\lt3\lt4$: $\mathrm{[CoCl_{3}(NH_{3})_{3}]}\lt\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}\lt\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}\lt\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$.
6 Three $\mathrm{NH_{3}}$ and three Cl fill the six positions; one Cl is outside: $\mathrm{[PtCl_{3}(NH_{3})_{3}]Cl}$. $0.10\ \mathrm{mol}\ \mathrm{AgCl}\times143.4=14.3\ \mathrm{g}$.
7 One of three Cl is ionisable; four $\mathrm{NH_{3}}$ and two Cl inside give CN 6: $\mathrm{[CrCl_{2}(NH_{3})_{4}]Cl}$.
8 All three chlorides are ligands (they satisfy both primary and secondary valency); with three $\mathrm{NH_{3}}$ they complete CN 6, and the entity is neutral — nothing is left to ionise.
II
Ligands, denticity, chelation and coordination number.
  • 1 Classify as unidentate, didentate, tridentate or hexadentate: $\mathrm{H_{2}O}$, en, $\mathrm{C_{2}O_{4}^{2-}}$, $\mathrm{EDTA^{4-}}$, gly, $\mathrm{NO_{2}^{-}}$, dien, $\mathrm{CN^{-}}$. Which of them are ambidentate?
  • 2 What is the coordination number of iron in $\mathrm{[Fe(C_{2}O_{4})_{3}]^{3-}}$?
  • 3 What is the coordination number of copper in $\mathrm{[Cu(gly)_{2}]}$?
  • 4 How many chelate rings does one $\mathrm{EDTA^{4-}}$ ion form when it binds a metal through all six donor atoms?
  • 5 Name the two linkage forms of a complex containing $\mathrm{SCN^{-}}$ and say which atom donates in each.
  • 6 For $\mathrm{[Ni(NH_{3})_{6}]^{2+}(aq) + 3en(aq) \rightarrow [Ni(en)_{3}]^{2+}(aq) + 6NH_{3}(aq)}$, by how much does the number of solute particles increase? Use this to explain the chelate effect.
  • 7 How many atoms (including the metal) make up the chelate ring formed by one en ligand?
  • 8 Classify as homoleptic or heteroleptic: $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[CoCl_{2}(en)_{2}]^{+}}$, $\mathrm{[Ni(CO)_{4}]}$, $\mathrm{[Fe(CN)_{5}(NO)]^{2-}}$.
1 Unidentate: $\mathrm{H_{2}O}$, $\mathrm{NO_{2}^{-}}$, $\mathrm{CN^{-}}$; didentate: en, $\mathrm{C_{2}O_{4}^{2-}}$, gly; tridentate: dien; hexadentate: $\mathrm{EDTA^{4-}}$. Ambidentate: $\mathrm{NO_{2}^{-}}$ (N or O) and $\mathrm{CN^{-}}$ (C or N).
2 $3\times2=6$.
3 $2\times2=4$ (each glycinate uses N and O).
4 Six donor atoms in one chain: each donor after the first closes a ring, so $6-1=5$ rings (all five-membered).
5 S-bonded: thiocyanato-S ($\mathrm{M{-}SCN}$); N-bonded: thiocyanato-N ($\mathrm{M{-}NCS}$, older name isothiocyanato).
6 From $1+3=4$ to $1+6=7$ particles: an increase of $3$. Six Ni–N bonds are broken and six formed, so $\Delta H\approx0$, while $\Delta S\gt0$; hence $\Delta G=\Delta H-T\Delta S\lt0$ and the chelate is favoured.
7 M, N, C, C, N: a five-membered ring.
8 Homoleptic: $\mathrm{[Co(NH_{3})_{6}]^{3+}}$, $\mathrm{[Ni(CO)_{4}]}$. Heteroleptic: $\mathrm{[CoCl_{2}(en)_{2}]^{+}}$, $\mathrm{[Fe(CN)_{5}(NO)]^{2-}}$.
III
Oxidation states, charges and counting.
  • 1 Find the oxidation state of chromium in $\mathrm{K_{3}[Cr(C_{2}O_{4})_{3}]}$.
  • 2 Find the oxidation state of iron in $\mathrm{[Fe(CO)_{5}]}$ and its coordination number.
  • 3 Find the oxidation state of cobalt in $\mathrm{[CoCl(en)_{2}(NH_{3})]SO_{4}}$.
  • 4 In $\mathrm{[Pt(NH_{3})_{4}][PtCl_{6}]}$ the cation contains Pt(II). Find the charge of the anion and the oxidation state of its platinum.
  • 5 Find the oxidation state of nickel in $\mathrm{[Ni(CN)_{4}]^{2-}}$ and in $\mathrm{[Ni(CO)_{4}]}$.
  • 6 How many ions does one formula unit of $\mathrm{K_{3}[Fe(CN)_{6}]}$ give in water?
  • 7 One mole of $\mathrm{[Co(NH_{3})_{6}]_{2}(SO_{4})_{3}}$ is treated with excess $\mathrm{BaCl_{2}}$. How many moles of $\mathrm{BaSO_{4}}$ form?
  • 8 In $\mathrm{[Co(EDTA)]^{-}}$, find the oxidation state of cobalt and the coordination number.
1 $q=-3$: $x+3(-2)=-3$, $x=+3$.
2 Neutral entity, neutral CO ligands: $x=0$; CN $=5$ (trigonal bipyramidal).
3 One $\mathrm{SO_{4}^{2-}}$ outside: $q=+2$. $x+(-1)+0+0=+2$, $x=+3$. (CN $=1+4+1=6$.)
4 The cation $\mathrm{[Pt(NH_{3})_{4}]^{2+}}$ has charge $+2$, so the anion is $\mathrm{[PtCl_{6}]^{2-}}$: $x-6=-2$, Pt $+4$. The two platinum atoms are in different oxidation states.
5 $\mathrm{[Ni(CN)_{4}]^{2-}}$: $x-4=-2$, $x=+2$. $\mathrm{[Ni(CO)_{4}]}$: $x=0$.
6 $3\mathrm{K^{+}}+\mathrm{[Fe(CN)_{6}]^{3-}}$: $4$ ions.
7 All three sulphates are counter ions: $3$ mol $\mathrm{BaSO_{4}}$ ($\mathrm{SO_{4}^{2-}(aq)+Ba^{2+}(aq)\rightarrow BaSO_{4}(s)}$, three times).
8 $x+(-4)=-1$, $x=+3$; one hexadentate ligand, CN $=6$.
IV
IUPAC names and formulas.
  • 1 Name $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$.
  • 2 Name $\mathrm{K_{2}[PtCl_{6}]}$ and give the oxidation state of platinum.
  • 3 Name $\mathrm{[CrCl_{2}(H_{2}O)_{4}]Cl}$.
  • 4 Name $\mathrm{[Co(NH_{3})_{6}][Cr(CN)_{6}]}$ and give the oxidation state of chromium.
  • 5 Write the formula of pentaamminenitrito-O-cobalt(III) chloride.
  • 6 Write the formula of potassium tetrahydroxidozincate(II).
  • 7 Write the formula of dichloridobis(ethane-1,2-diamine)platinum(IV) nitrate. How many ions does one formula unit give?
  • 8 A student names $\mathrm{K_{2}[PtCl_{4}]}$ "potassium tetrachloridoplatinum(II)". Correct the name and explain the error.
  • 9 How many hydrogen atoms are there in one formula unit of tetraamminediaquacobalt(III) chloride?
1 Hexaamminecobalt(III) chloride.
2 $x-6=-2$, Pt $+4$: potassium hexachloridoplatinate(IV).
3 $x-2=+1$, Cr $+3$: tetraaquadichloridochromium(III) chloride.
4 $\mathrm{[Co(NH_{3})_{6}]^{3+}}$ (Co $+3$) balances $\mathrm{[Cr(CN)_{6}]^{3-}}$: $x-6=-3$, Cr $+3$. Hexaamminecobalt(III) hexacyanidochromate(III).
5 $\mathrm{[Co(ONO)(NH_{3})_{5}]Cl_{2}}$ (O-bonded nitrite written ONO; $q=+3-1=+2$).
6 $\mathrm{Zn^{2+}}$ with four $\mathrm{OH^{-}}$: $q=-2$: $\mathrm{K_{2}[Zn(OH)_{4}]}$.
7 $q=+4-2=+2$: $\mathrm{[PtCl_{2}(en)_{2}](NO_{3})_{2}}$; ions $1+2=3$.
8 The entity $\mathrm{[PtCl_{4}]^{2-}}$ is an anion, so the metal takes the -ate ending: potassium tetrachloridoplatinate(II).
9 $\mathrm{[Co(H_{2}O)_{2}(NH_{3})_{4}]Cl_{3}}$: $4\times3+2\times2=16$ H atoms.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The IUPAC name of $\mathrm{[CoCl(H_{2}O)(NH_{3})_{4}]Cl_{2}}$ is (A) tetraammineaquachloridocobalt(III) chloride (B) aquatetraamminechloridocobalt(III) chloride (C) tetraammineaquachloridocobalt(II) chloride (D) chloridoaquatetraamminecobaltate(III) chloride

Oxidation state $q=+2$ (two $\mathrm{Cl^{-}}$ outside); $x+(-1)+0+0=+2$, so Co is $+3$ — rules out (C).
Order Alphabetise by ligand name, ignoring "tetra": ammine, aqua, chlorido. (B) alphabetises "aqua" against "tetraammine", which is wrong; (D) uses -ate for a cation.
Answer (A).

E2. JEE Main · Numerical $0.02\ \mathrm{mol}$ of an octahedral platinum(IV) complex $\mathrm{PtCl_{4}\cdot xNH_{3}}$, with $\mathrm{NH_{3}}$ as the only neutral ligand, gives $0.06\ \mathrm{mol}$ of $\mathrm{AgCl}$ with excess silver nitrate. Find $x$. Give the answer to the nearest integer.

Ionisable Cl $0.06/0.02=3$ chlorides per formula unit are outside, so $4-3=1$ chloride is a ligand.
Fill CN 6 $1\ \mathrm{Cl}+x\ \mathrm{NH_{3}}=6$: $x=5$, i.e. $\mathrm{[PtCl(NH_{3})_{5}]Cl_{3}}$.
Answer $5$.

E3. JEE Main · MCQ The correct formula of potassium tetracyanidonickelate(II) is (A) $\mathrm{K[Ni(CN)_{4}]}$ (B) $\mathrm{K_{2}[Ni(CN)_{4}]}$ (C) $\mathrm{K_{4}[Ni(CN)_{4}]}$ (D) $\mathrm{K_{2}[Ni(CN)_{6}]}$

Charge "tetracyanido" = four $\mathrm{CN^{-}}$, "nickelate(II)" = $\mathrm{Ni^{2+}}$ in an anion: $q=+2-4=-2$, balanced by two $\mathrm{K^{+}}$.
Answer (B) $\mathrm{K_{2}[Ni(CN)_{4}]}$.
⏱ Shortcut (C) counts the cyanides instead of the charge; (D) has six ligands, contradicting "tetra".

E4. JEE Main · Numerical A $0.010\ \mathrm{mol\,kg^{-1}}$ aqueous solution of an octahedral cobalt(III) compound $\mathrm{CoCl_{3}\cdot xNH_{3}}$ ($\mathrm{NH_{3}}$ the only neutral ligand) freezes at $-0.0744\ ^{\circ}\mathrm{C}$. Taking $K_{f}=1.86\ \mathrm{K\,kg\,mol^{-1}}$ and complete dissociation, find $x$. Give the answer to the nearest integer.

van't Hoff factor $\Delta T_{f}=iK_{f}m$: $i=\dfrac{0.0744}{1.86\times0.010}=4$ ions per formula unit.
Formula 4 ions = 1 cation + 3 $\mathrm{Cl^{-}}$: no chloride is a ligand, so six $\mathrm{NH_{3}}$ fill CN 6: $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$.
Answer $6$.

E5. JEE Main · MCQ Equimolar dilute aqueous solutions are prepared of the following. Which has the highest molar conductivity? (A) $\mathrm{[CoCl_{3}(NH_{3})_{3}]}$ (B) $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$ (C) $\mathrm{[Co(NH_{3})_{6}]Cl_{3}}$ (D) $\mathrm{[CoCl(NH_{3})_{5}]Cl_{2}}$

Count ions (A) 0, (B) 2, (C) 4, (D) 3. More ions — and more highly charged ones — carry more current.
Answer (C).

E6. JEE Main · Numerical Let $a$ be the coordination number of iron in $\mathrm{[Fe(C_{2}O_{4})_{3}]^{3-}}$, $b$ the oxidation state of nickel in $\mathrm{[Ni(CO)_{4}]}$ and $c$ the number of ions given by one formula unit of $\mathrm{K_{4}[Fe(CN)_{6}]}$ in water. Find $a+b+c$. Give the answer to the nearest integer.

a Three didentate oxalates: $a=6$ (not 3).
b, c $b=0$ (neutral CO, neutral entity); $c=4+1=5$.
Answer $6+0+5=11$.
⏱ Shortcut The usual wrong answers are 8 (CN taken as 3) and 15 (counting the six cyanides as ions).
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. How hard is the water you drink — and how does a chelating ligand, EDTA, let you measure it to within a few milligrams per litre?

Why it matters. Calcium and magnesium ions cause scale in kettles, boilers and pipes, waste soap and shorten the life of water heaters. Water utilities from Chennai to Cape Town report hardness as mg of $\mathrm{CaCO_{3}}$ per litre, and the standard method is a titration with EDTA, which grips each $\mathrm{Ca^{2+}}$ or $\mathrm{Mg^{2+}}$ ion in a 1 : 1 hexadentate chelate — the chelate effect at work.

What to do.

  1. Collect 100 mL samples of tap water, bottled water, rainwater and (if available) borewell water.
  2. In a school laboratory, buffer each sample to pH 10 with an ammonia–ammonium chloride buffer, add Eriochrome Black T indicator (wine red with free metal ions) and titrate with 0.0100 M disodium EDTA until the colour turns blue.
  3. Since EDTA binds metal ions 1 : 1, moles of $\mathrm{Ca^{2+}}+\mathrm{Mg^{2+}}$ = moles of EDTA used. Convert to mg of $\mathrm{CaCO_{3}}$ per litre ($M=100\ \mathrm{g\,mol^{-1}}$).
  4. Repeat each titration until two readings agree within 0.1 mL, and compare your results with the hardness quoted on the bottled-water label or the local water board's report.

Tools: Burette, pipette, conical flasks, buffer, indicator, standard EDTA solution (prepared by the teacher), spreadsheet.

Hand in: A table of titres and hardness values, one worked calculation, the chemical equation for the chelation ($\mathrm{Ca^{2+} + EDTA^{4-} \rightarrow [Ca(EDTA)]^{2-}}$), and a paragraph explaining why a hexadentate ligand gives a much sharper end point than a unidentate one would.

Going further. Boil a sample for 15 minutes, filter and titrate again: the drop in hardness is the "temporary" (hydrogencarbonate) hardness. Why would ammonia, a unidentate ligand, be useless as a titrant for $\mathrm{Ca^{2+}}$?

Instructor note: municipal tap water typically gives 50–300 mg/L as CaCO₃ and rainwater below 20 mg/L; titres of 5–30 mL with 0.0100 M EDTA on 100 mL samples are convenient. EDTA, buffer and indicator should be handled with gloves and goggles; dispose of solutions as the school's laboratory rules require.

🧪 Self-check quiz

0/5 correct

Q1. The coordination number of cobalt in $\mathrm{[CoCl_{2}(en)_{2}]^{+}}$ is

Q2. Which of the following is a double salt rather than a coordination compound?

Q3. Which ligand is ambidentate?

Q4. One mole of $\mathrm{[CoCl_{2}(NH_{3})_{4}]Cl}$ is treated with excess silver nitrate. The amount of $\mathrm{AgCl}$ precipitated is

Q5. $\mathrm{[Ni(en)_{3}]^{2+}}$ is far more stable than $\mathrm{[Ni(NH_{3})_{6}]^{2+}}$ mainly because