Chapter 7 · Redox Reactions and Electrochemistry

7.2 Conductance of Electrolytic Solutions

A solution of ions conducts electricity, and how well it conducts tells you how many ions it has and how freely they move. From one resistance reading and a cell constant you get the conductivity $\kappa$ and the molar conductivity $\Lambda_m$; Kohlrausch's law of independent migration then gives $\Lambda_m^{\circ}$ of weak electrolytes, their degree of dissociation, $K_a$, and the solubility of salts that hardly dissolve at all.

A water-purification plant checks its output not with a chemical test but with a small probe that reads the water's conductivity: ultrapure water used for making computer chips conducts about a hundred thousand times less than tap water, and a rise in the reading means ions have crept back in. Farmers measure the "EC" of irrigation water and soil to detect salinity; hospitals measure the conductivity of dialysis fluid; a sports-drink maker uses it as a quick check of the salt content. Sugar dissolved in water does not conduct; salt does. And a dilute solution of hydrochloric acid conducts far better than one of acetic acid of the same concentration — even though both are "acids".

In this section we make these observations quantitative. We define resistance, resistivity, conductance and conductivity, see how a conductivity cell is calibrated, and then introduce the quantity that lets us compare electrolytes fairly, the molar conductivity. Its variation with concentration separates strong electrolytes from weak ones, and Kohlrausch's law of independent migration of ions turns conductance measurements into a tool for finding degrees of dissociation, ionisation constants and solubility products. We use the redox ideas of Section 7.1 only in passing (electrode reactions); the cells themselves come in Section 7.3. Concentration units are from Section 5.1.

Units and data used in this section: conductivity $\kappa$ in $\mathrm{S\,cm^{-1}}$ (also $\mathrm{S\,m^{-1}}$; $1\ \mathrm{S\,cm^{-1}}=100\ \mathrm{S\,m^{-1}}$); concentration $c$ in $\mathrm{mol\,L^{-1}}$; molar conductivity $\Lambda_m$ in $\mathrm{S\,cm^{2}\,mol^{-1}}$ ($1\ \mathrm{S\,m^{2}\,mol^{-1}}=10^{4}\ \mathrm{S\,cm^{2}\,mol^{-1}}$). All values are at $298\ \mathrm{K}$. Limiting molar ionic conductivities $\lambda^{\circ}$ (per mole of the ion, $\mathrm{S\,cm^{2}\,mol^{-1}}$) are listed in the table in the third part of the section.

Metallic and electrolytic conduction; conductivity and cell constant

An electric current is a flow of charge. In a copper wire the charge carriers are the delocalised electrons of the metal (the "electron sea" of metallic bonding): they drift through a fixed lattice of cations, and the metal is unchanged by the current. In a solution of sodium chloride, or in molten sodium chloride, the carriers are ions: $\mathrm{Na^{+}}$ moves towards the negative electrode and $\mathrm{Cl^{-}}$ towards the positive one. At the electrodes the ions must hand over or pick up electrons, so the passage of current through an electrolyte is always accompanied by chemical change at the electrodes — electrolysis.

Metallic (electronic) conductionElectrolytic (ionic) conduction
carrierselectronscations and anions, moving in opposite directions
matter transported?noyes — ions carry matter
chemical change?noneat the electrodes (oxidation at the anode, reduction at the cathode)
effect of raising $T$conductance falls (lattice vibrations scatter electrons)conductance rises (lower viscosity, less solvation drag; weak electrolytes ionise more)
typical $\kappa$$\sim10^{5}$–$10^{6}\ \mathrm{S\,cm^{-1}}$$\sim10^{-4}$–$10^{-1}\ \mathrm{S\,cm^{-1}}$

The conductance of an electrolytic solution depends on (i) the nature of the electrolyte — a strong electrolyte is fully dissociated, a weak one only partly; (ii) the size and solvation of the ions — a heavily hydrated ion drags a shell of water with it; (iii) the solvent — its viscosity and its ability to separate ions (dielectric constant); (iv) the concentration; and (v) the temperature. Pure water itself conducts very slightly, because of its own ionisation into $\mathrm{H^{+}}$ and $\mathrm{OH^{-}}$.

📘 Definition 7.6 — Resistance, resistivity, conductance and conductivity

For a uniform conductor (a wire, or a column of solution between two parallel electrodes) of length $l$ and cross-sectional area $A$, the resistance $R$ (unit ohm, $\Omega$) is proportional to $l$ and inversely proportional to $A$:

$$R=\rho\,\frac{l}{A}.$$

The constant $\rho$ is the resistivity (specific resistance), unit $\Omega\,\mathrm{m}$ or $\Omega\,\mathrm{cm}$: the resistance of a cube of the material of edge $1\ \mathrm{m}$ (or $1\ \mathrm{cm}$) between opposite faces.

The conductance $G$ is the reciprocal of resistance, $G=\dfrac1R$, unit siemens, $\mathrm{S}=\Omega^{-1}$. The conductivity (specific conductance) $\kappa$ (kappa) is the reciprocal of resistivity:

$$\kappa=\frac{1}{\rho}=\frac{1}{R}\cdot\frac{l}{A}=G\,\frac{l}{A},$$

with unit $\mathrm{S\,m^{-1}}$ (SI) or $\mathrm{S\,cm^{-1}}$. It is the conductance of a $1\ \mathrm{cm}$ cube of the solution between opposite faces — a property of the solution alone, independent of the vessel.

Measuring the resistance of a solution. Two difficulties appear that do not arise for a wire. First, a steady (DC) current would electrolyse the solution, changing its composition and coating the electrodes with gas bubbles that add a false resistance (polarisation). So an alternating current of about $1\ \mathrm{kHz}$ is used, in a Wheatstone-bridge arrangement with a headphone or an electronic null detector. Second, the solution has no fixed shape, so it is held in a conductivity cell: two platinum electrodes coated with finely divided platinum ("platinised", to increase the effective surface and reduce polarisation) fixed at a constant distance apart.

📘 Definition 7.7 — Cell constant

The cell constant $G^{*}$ of a conductivity cell is the ratio of the distance between its electrodes to their area,

$$G^{*}=\frac{l}{A}\quad(\text{unit }\mathrm{cm^{-1}}\text{ or }\mathrm{m^{-1}}),$$ $$\kappa=\frac{G^{*}}{R}=G^{*}\,G.$$

Because the electric field lines spread beyond the plates, $G^{*}$ is not found with a ruler but by calibration: the cell is filled with a standard potassium chloride solution of accurately known conductivity, its resistance $R$ is measured, and $G^{*}=\kappa_{\mathrm{KCl}}\,R$. Accepted values at $298\ \mathrm{K}$: $\kappa=0.0129\ \mathrm{S\,cm^{-1}}$ for $0.100\ \mathrm{mol\,L^{-1}}$ KCl and $0.00141\ \mathrm{S\,cm^{-1}}$ for $0.0100\ \mathrm{mol\,L^{-1}}$ KCl.

✏️ Example 1 — Calibrate the cell, then use it
A conductivity cell filled with $0.100\ \mathrm{mol\,L^{-1}}$ KCl ($\kappa=0.0129\ \mathrm{S\,cm^{-1}}$) has a resistance of $100\ \Omega$ at $298\ \mathrm{K}$. The same cell filled with a $0.0200\ \mathrm{mol\,L^{-1}}$ solution of an electrolyte X has a resistance of $520\ \Omega$. Find (a) the cell constant, (b) the conductivity of the X solution, and (c) its molar conductivity (defined in the next subsection as $\Lambda_m=1000\kappa/c$).
Find the molar conductivity (c) before you open the solution:
(a) $G^{*}=\kappa R=0.0129\ \mathrm{S\,cm^{-1}}\times100\ \Omega=1.29\ \mathrm{cm^{-1}}$.
(b) $\kappa=\dfrac{G^{*}}{R}=\dfrac{1.29}{520}=2.48\times10^{-3}\ \mathrm{S\,cm^{-1}}$.
(c) $\Lambda_m=\dfrac{1000\times2.48\times10^{-3}}{0.0200}=124\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
Check The X solution is five times more dilute than the KCl and its resistance about five times larger, so the two solutions conduct about equally well per mole — reasonable for two 1:1 salts. In SI units $\Lambda_m=1.24\times10^{-2}\ \mathrm{S\,m^{2}\,mol^{-1}}$.

When the temperature of a copper wire and of a dilute NaCl solution are both raised by $20\ \mathrm{K}$,

Molar conductivity and its variation with concentration

Conductivity is a property of a particular solution, and it naturally grows with the number of ions per unit volume: a $0.1\ \mathrm{mol\,L^{-1}}$ solution conducts more than a $0.01\ \mathrm{mol\,L^{-1}}$ one of the same salt. To compare how well each mole of an electrolyte conducts, we divide by the concentration.

📘 Definition 7.8 — Molar conductivity and limiting molar conductivity

The molar conductivity $\Lambda_m$ of a solution of concentration $c$ is

$$\Lambda_m=\frac{\kappa}{c}.$$

With $\kappa$ in $\mathrm{S\,cm^{-1}}$ and $c$ in $\mathrm{mol\,L^{-1}}$ ($1\ \mathrm{L}=1000\ \mathrm{cm^{3}}$),

$$\Lambda_m\ (\mathrm{S\,cm^{2}\,mol^{-1}})=\frac{1000\,\kappa\ (\mathrm{S\,cm^{-1}})}{c\ (\mathrm{mol\,L^{-1}})}.$$

In SI, $\Lambda_m=\kappa/c$ with $\kappa$ in $\mathrm{S\,m^{-1}}$ and $c$ in $\mathrm{mol\,m^{-3}}$, giving $\mathrm{S\,m^{2}\,mol^{-1}}$. Physically, $\Lambda_m$ is the conductance of the whole volume of solution that contains $1\ \mathrm{mol}$ of electrolyte, placed between two large parallel electrodes $1\ \mathrm{cm}$ apart.

The limiting value of $\Lambda_m$ as $c\to0$ (infinite dilution) is the limiting molar conductivity $\Lambda_m^{\circ}$.

What happens on dilution. Diluting a solution lowers $\kappa$, because there are fewer ions in each cubic centimetre. But it raises $\Lambda_m$. In the picture behind the definition, the volume holding one mole grows as the solution is diluted, so the electrodes must grow too; the number of ions between them stays one mole's worth (for a strong electrolyte) or increases (for a weak one), and each ion moves more freely when its neighbours are further away. The way $\Lambda_m$ rises is quite different for the two kinds of electrolyte.

Strong electrolytes (KCl, HCl, NaOH, $\mathrm{CuSO_{4}}$) are completely dissociated at every concentration, so the number of ions per mole does not change. Yet $\Lambda_m$ still rises slowly on dilution. The reason is interionic attraction: each ion is surrounded, on average, by a slight excess of ions of opposite charge — an ionic atmosphere. When the ion moves in the field, its atmosphere lags behind and has to re-form ahead of it, pulling it back (the relaxation or asymmetry effect); and the oppositely charged atmosphere, with its own solvent, is driven the other way, so the ion swims "upstream" (the electrophoretic effect). Both drags weaken as the ions get further apart, and vanish at infinite dilution.

📐 Result 7.4 — Debye–Hückel–Onsager equation (strong electrolytes)

For a strong electrolyte in dilute solution (in practice up to about $0.01$–$0.02\ \mathrm{mol\,L^{-1}}$),

$$\Lambda_m=\Lambda_m^{\circ}-A\sqrt{c}.$$

A graph of $\Lambda_m$ against $\sqrt c$ is a straight line of intercept $\Lambda_m^{\circ}$ and slope $-A$. The constant $A$ depends on the solvent, the temperature and the type of electrolyte (the charges of its ions): electrolytes of the same type (1:1 such as NaCl, KCl; 2:1 such as $\mathrm{CaCl_{2}}$; 2:2 such as $\mathrm{MgSO_{4}}$) have similar values of $A$, and $A$ is larger for more highly charged ions. Extrapolating the straight line to $c=0$ gives $\Lambda_m^{\circ}$ of a strong electrolyte.

Weak electrolytes (ethanoic acid, ammonium hydroxide, water) behave quite differently. They are only partly dissociated, and their degree of dissociation $\alpha$ increases sharply on dilution (Ostwald's dilution law, Unit 6). At ordinary concentrations $\Lambda_m$ is small — few ions per mole — and as $c\to0$ it shoots up steeply, because more and more of each mole becomes ions. The graph of $\Lambda_m$ against $\sqrt c$ is a steep curve, not a line, and it reaches its limit only at concentrations too low to measure accurately. So $\Lambda_m^{\circ}$ of a weak electrolyte cannot be found by extrapolation; it needs Kohlrausch's law (next subsection).

✏️ Example 2 — Extrapolating a strong electrolyte
The molar conductivity of aqueous NaCl at $298\ \mathrm{K}$ was measured at four concentrations:
$c\ (\mathrm{mol\,L^{-1}})$$0.0004$$0.0016$$0.0036$$0.0064$
$\Lambda_m\ (\mathrm{S\,cm^{2}\,mol^{-1}})$$124.6$$122.8$$121.0$$119.2$
(a) Show that the data obey $\Lambda_m=\Lambda_m^{\circ}-A\sqrt c$ and find $\Lambda_m^{\circ}$ and $A$. (b) Predict $\Lambda_m$ and $\kappa$ at $0.0100\ \mathrm{mol\,L^{-1}}$.
√c $\sqrt c=0.02,\ 0.04,\ 0.06,\ 0.08$. Each step of $0.02$ in $\sqrt c$ lowers $\Lambda_m$ by exactly $1.8$: the points lie on a straight line.
(a) Slope $=-\dfrac{1.8}{0.02}=-90$, so $A=90\ \mathrm{S\,cm^{2}\,mol^{-1}\,(mol\,L^{-1})^{-1/2}}$. Intercept: $\Lambda_m^{\circ}=124.6+90\times0.02=126.4\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
(b) $\sqrt{0.0100}=0.100$: $\Lambda_m=126.4-9.0=117.4\ \mathrm{S\,cm^{2}\,mol^{-1}}$; $\kappa=\dfrac{\Lambda_m c}{1000}=\dfrac{117.4\times0.0100}{1000}=1.17\times10^{-3}\ \mathrm{S\,cm^{-1}}$.
Note Plotting against $c$ instead of $\sqrt c$ would give a curve; the square root is what makes the strong-electrolyte line straight.

In the molar-conductivity explorer select $\mathrm{CH_{3}COOH}$ and move the concentration from $0.0100$ down to $0.0001\ \mathrm{mol\,L^{-1}}$ (a hundred-fold dilution). Roughly what happens to $\Lambda_m$?

At $c=0.0100\ \mathrm{mol\,L^{-1}}$ (slider at $\log c=-2.0$) the readouts for $\mathrm{CH_{3}COOH}$ are $\Lambda_m=16.2\ \mathrm{S\,cm^{2}\,mol^{-1}}$, $\alpha=0.042$, $\kappa=1.62\times10^{-4}\ \mathrm{S\,cm^{-1}}$. At $0.0001\ \mathrm{mol\,L^{-1}}$ ($\log c=-4.0$) they are $\Lambda_m=134.2$, $\alpha=0.344$ and $\kappa=1.34\times10^{-5}$: $\kappa$ fell only about twelve-fold for a hundred-fold dilution, because the fraction ionised rose from $4\%$ to $34\%$. Switch to KCl: $\Lambda_m$ goes only from $140.4$ to $148.9$ — the 6% change of the second option, caused by weaker interionic attraction, not by more ions. The weak-acid curve is still far below its $\Lambda_m^{\circ}=390.5$ even at the most dilute setting.
Interactive 1 — Molar Conductivity: Strong versus Weak Electrolytes

Choose an electrolyte and a concentration (logarithmic slider). In the $\Lambda_m$–$\sqrt c$ view the three strong electrolytes follow straight lines $\Lambda_m=\Lambda_m^{\circ}-A\sqrt c$ (dashed extension to the intercept $\Lambda_m^{\circ}$); the weak acid and base rise steeply as $c\to0$ and never reach their $\Lambda_m^{\circ}$ (dotted level) in the measurable range. Switch the view to $\kappa$ against $c$ to see that conductivity does the opposite: it falls on dilution. Press Play to dilute the solution step by step. (Model: limiting-law slopes for the strong electrolytes; for the weak ones $\Lambda_m=\alpha\Lambda_m^{\circ}$ with $\alpha$ from $K=1.8\times10^{-5}$.)

0.0100 M
conductivity κ—
molar conductivity Λm—
Λm / Λ°m—
Λ°m—

A $0.10\ \mathrm{mol\,L^{-1}}$ solution of KCl is diluted to $0.010\ \mathrm{mol\,L^{-1}}$. Which statement is correct?

Kohlrausch's law and its applications

Comparing limiting molar conductivities of pairs of salts reveals a striking regularity. The difference between a potassium salt and the sodium salt of the same anion is almost the same whatever the anion:

$$\Lambda_m^{\circ}(\mathrm{KCl})-\Lambda_m^{\circ}(\mathrm{NaCl})=149.8-126.4=23.4,$$ $$\Lambda_m^{\circ}(\mathrm{KNO_{3}})-\Lambda_m^{\circ}(\mathrm{NaNO_{3}})=144.9-121.5=23.4\ \mathrm{S\,cm^{2}\,mol^{-1}}.$$

At infinite dilution the ions are so far apart that each moves as if the others were not there; each ion therefore contributes a fixed amount of its own, independent of its partner.

📐 Law 7.5 — Kohlrausch's law of independent migration of ions

At infinite dilution, the limiting molar conductivity of an electrolyte is the sum of the contributions of its ions. For an electrolyte that gives $\nu_{+}$ cations and $\nu_{-}$ anions per formula unit,

$$\Lambda_m^{\circ}=\nu_{+}\lambda_{+}^{\circ}+\nu_{-}\lambda_{-}^{\circ},$$

where $\lambda_{+}^{\circ}$ and $\lambda_{-}^{\circ}$ are the limiting molar conductivities of the ions (per mole of the ion), each a constant for a given ion, solvent and temperature. Example: $\Lambda_m^{\circ}(\mathrm{CaCl_{2}})=\lambda^{\circ}(\mathrm{Ca^{2+}})+2\lambda^{\circ}(\mathrm{Cl^{-}})$. The law holds strictly only at infinite dilution.

cation$\lambda^{\circ}$anion$\lambda^{\circ}$
$\mathrm{H^{+}}$$349.6$$\mathrm{OH^{-}}$$199.1$
$\mathrm{Li^{+}}$$38.7$$\mathrm{Cl^{-}}$$76.3$
$\mathrm{Na^{+}}$$50.1$$\mathrm{Br^{-}}$$78.1$
$\mathrm{K^{+}}$$73.5$$\mathrm{NO_{3}^{-}}$$71.4$
$\mathrm{NH_{4}^{+}}$$73.5$$\mathrm{CH_{3}COO^{-}}$$40.9$
$\mathrm{Ag^{+}}$$61.9$$\mathrm{HCOO^{-}}$$54.6$
$\mathrm{Mg^{2+}}$$106.0$$\mathrm{SO_{4}^{2-}}$$160.0$
$\mathrm{Ca^{2+}}$$119.0$
$\mathrm{Ba^{2+}}$$127.2$

Limiting molar ionic conductivities $\lambda^{\circ}$ in water at $298\ \mathrm{K}$, in $\mathrm{S\,cm^{2}\,mol^{-1}}$, per mole of the ion as written. (Some tables quote doubly charged ions per "half mole", e.g. $59.5$ for $\tfrac12\mathrm{Ca^{2+}}$ — always check which convention a table uses.)

Reading the table. Two features need explaining. First, among the alkali-metal ions $\lambda^{\circ}$ increases from $\mathrm{Li^{+}}$ to $\mathrm{K^{+}}$, although $\mathrm{Li^{+}}$ is the smallest bare ion. The small $\mathrm{Li^{+}}$ has the highest charge density, holds the largest shell of water molecules, and so moves as the bulkiest hydrated ion. Second, $\mathrm{H^{+}}$ and $\mathrm{OH^{-}}$ are several times more mobile than any other ion. They do not have to travel bodily through the water: a proton is passed from an $\mathrm{H_{3}O^{+}}$ ion to a neighbouring water molecule along the hydrogen-bonded network, which hands another proton on, and so on — the charge moves by a relay of short hops (the Grotthuss mechanism). $\mathrm{OH^{-}}$ moves by the same relay in reverse. This is why strong acids and bases have much larger $\Lambda_m^{\circ}$ than salts.

Application 1 — $\Lambda_m^{\circ}$ of a weak electrolyte. Choose strong electrolytes whose ions add and cancel to leave exactly the ions of the weak one. For ethanoic acid:

$$\Lambda_m^{\circ}(\mathrm{CH_{3}COOH})=\Lambda_m^{\circ}(\mathrm{CH_{3}COONa})+\Lambda_m^{\circ}(\mathrm{HCl})-\Lambda_m^{\circ}(\mathrm{NaCl}),$$ $$=91.0+425.9-126.4=390.5\ \mathrm{S\,cm^{2}\,mol^{-1}},$$

because $\lambda^{\circ}(\mathrm{Na^{+}})$ and $\lambda^{\circ}(\mathrm{Cl^{-}})$ cancel. All three strong electrolytes can be measured and extrapolated (Result 7.4).

Application 2 — degree of dissociation and dissociation constant. Once $\Lambda_m^{\circ}$ of a weak electrolyte is known, one conductance measurement at a known concentration tells us how much of it is ionised.

📐 Result 7.6 — Degree of dissociation and dissociation constant from conductance

For a weak electrolyte at concentration $c$, the ions present are a fraction $\alpha$ of what full dissociation would give. Because the ions of a weak electrolyte are few and far apart, each conducts almost as at infinite dilution, so (Arrhenius)

$$\alpha=\frac{\Lambda_m}{\Lambda_m^{\circ}}.$$

For a weak 1:1 electrolyte $\mathrm{HA}\rightleftharpoons\mathrm{H^{+}+A^{-}}$, the dissociation constant is then

$$K_a=\frac{c\alpha^{2}}{1-\alpha}=\frac{c\,\Lambda_m^{2}}{\Lambda_m^{\circ}(\Lambda_m^{\circ}-\Lambda_m)},$$

which reduces to $K_a\approx c\alpha^{2}$ when $\alpha\ll1$. The same expressions give $K_b$ for a weak base such as $\mathrm{NH_{4}OH}$. ($\alpha=\Lambda_m/\Lambda_m^{\circ}$ is not used for strong electrolytes, whose $\Lambda_m\lt\Lambda_m^{\circ}$ comes from interionic attraction, not from incomplete dissociation.)

✏️ Example 3 — Kohlrausch's law in three ways
Using the table of $\lambda^{\circ}$ values: (a) find $\Lambda_m^{\circ}$ of $\mathrm{CaCl_{2}}$ and of $\mathrm{MgSO_{4}}$; (b) find $\Lambda_m^{\circ}(\mathrm{NH_{4}OH})$ from $\Lambda_m^{\circ}(\mathrm{NH_{4}Cl})=149.8$, $\Lambda_m^{\circ}(\mathrm{NaOH})=249.2$ and $\Lambda_m^{\circ}(\mathrm{NaCl})=126.4\ \mathrm{S\,cm^{2}\,mol^{-1}}$; (c) find $\Lambda_m^{\circ}(\mathrm{AgCl})$ from $\Lambda_m^{\circ}(\mathrm{AgNO_{3}})=133.3$, $\Lambda_m^{\circ}(\mathrm{KCl})=149.8$ and $\Lambda_m^{\circ}(\mathrm{KNO_{3}})=144.9\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
(a) $\Lambda_m^{\circ}(\mathrm{CaCl_{2}})=119.0+2(76.3)=271.6$; $\Lambda_m^{\circ}(\mathrm{MgSO_{4}})=106.0+160.0=266.0\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
(b) $\mathrm{NH_{4}Cl}+\mathrm{NaOH}-\mathrm{NaCl}$ leaves $\mathrm{NH_{4}^{+}}+\mathrm{OH^{-}}$: $149.8+249.2-126.4=272.6\ \mathrm{S\,cm^{2}\,mol^{-1}}$ ($=73.5+199.1$ ✓).
(c) $\mathrm{AgNO_{3}}+\mathrm{KCl}-\mathrm{KNO_{3}}$ leaves $\mathrm{Ag^{+}}+\mathrm{Cl^{-}}$: $133.3+149.8-144.9=138.2\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
Method Write the ions of the target; pick a strong electrolyte containing each of them; subtract the one that removes the unwanted partner ions. The "spare" ions must cancel exactly — count them like terms in algebra.
✏️ Example 4 — Degree of dissociation and $K_a$ of ethanoic acid
The conductivity of $0.0100\ \mathrm{mol\,L^{-1}}$ ethanoic acid at $298\ \mathrm{K}$ is $1.63\times10^{-4}\ \mathrm{S\,cm^{-1}}$. Using $\Lambda_m^{\circ}(\mathrm{CH_{3}COOH})=390.5\ \mathrm{S\,cm^{2}\,mol^{-1}}$, find (a) $\Lambda_m$, (b) the degree of dissociation, (c) $K_a$, and (d) $[\mathrm{H^{+}}]$ in the solution.
Find $K_a$ (c) first:
(a) $\Lambda_m=\dfrac{1000\times1.63\times10^{-4}}{0.0100}=16.3\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
(b) $\alpha=\dfrac{16.3}{390.5}=0.0417$ — about 4% of the acid molecules are ionised.
(c) $K_a=\dfrac{c\alpha^{2}}{1-\alpha}=\dfrac{0.0100\times(0.0417)^{2}}{0.958}=1.82\times10^{-5}$. (The approximation $c\alpha^{2}$ gives $1.74\times10^{-5}$, 4% low.)
(d) $[\mathrm{H^{+}}]=c\alpha=4.17\times10^{-4}\ \mathrm{mol\,L^{-1}}$.
Check The accepted $K_a$ of ethanoic acid is $1.8\times10^{-5}$ — conductance gives it from a single resistance reading.

Application 3 — solubility of a sparingly soluble salt. A salt such as AgCl or $\mathrm{BaSO_{4}}$ dissolves so little that its saturated solution is extremely dilute. Two consequences follow. Its conductivity is comparable with that of the water itself, so the water's contribution must be subtracted. And the ions are so far apart that $\Lambda_m$ of the dissolved salt is practically $\Lambda_m^{\circ}$, which Kohlrausch's law supplies.

📐 Result 7.7 — Solubility and $K_{sp}$ from conductivity

For a saturated solution of a sparingly soluble salt,

$$\kappa(\text{salt})=\kappa(\text{solution})-\kappa(\text{water}),$$ $$S=\frac{1000\,\kappa(\text{salt})}{\Lambda_m^{\circ}}\ \ \mathrm{mol\,L^{-1}},$$

with $\Lambda_m^{\circ}$ for the formula unit (e.g. $\lambda^{\circ}(\mathrm{Ba^{2+}})+\lambda^{\circ}(\mathrm{SO_{4}^{2-}})$). For a 1:1 or 2:2 salt $K_{sp}=S^{2}$. The same idea applied to pure water ($\Lambda_m^{\circ}=\lambda^{\circ}(\mathrm{H^{+}})+\lambda^{\circ}(\mathrm{OH^{-}})$) gives $[\mathrm{H^{+}}]$ and the ionic product $K_w$.

✏️ Example 5 — Solubility product of silver chloride
At $298\ \mathrm{K}$ a saturated solution of AgCl has conductivity $3.46\times10^{-6}\ \mathrm{S\,cm^{-1}}$, and the water used has $1.60\times10^{-6}\ \mathrm{S\,cm^{-1}}$. Find the solubility of AgCl in $\mathrm{mol\,L^{-1}}$ and in $\mathrm{g\,L^{-1}}$ ($M=143.3\ \mathrm{g\,mol^{-1}}$), and its $K_{sp}$.
Salt $\kappa(\mathrm{AgCl})=3.46\times10^{-6}-1.60\times10^{-6}=1.86\times10^{-6}\ \mathrm{S\,cm^{-1}}$.
Λ° $\Lambda_m^{\circ}(\mathrm{AgCl})=61.9+76.3=138.2\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
S $S=\dfrac{1000\times1.86\times10^{-6}}{138.2}=1.35\times10^{-5}\ \mathrm{mol\,L^{-1}}$, i.e. $1.35\times10^{-5}\times143.3=1.93\times10^{-3}\ \mathrm{g\,L^{-1}}$ — under $2\ \mathrm{mg}$ per litre.
Ksp $K_{sp}=[\mathrm{Ag^{+}}][\mathrm{Cl^{-}}]=S^{2}=1.81\times10^{-10}$.
Note Forgetting to subtract the water's conductivity would give $S=2.50\times10^{-5}$ and $K_{sp}$ more than three times too large.
✏️ Example 6 — Barium sulphate, and the water itself
(a) A saturated solution of barium sulphate at $298\ \mathrm{K}$ has conductivity $4.22\times10^{-6}\ \mathrm{S\,cm^{-1}}$; the water used has $1.20\times10^{-6}\ \mathrm{S\,cm^{-1}}$. Find the solubility of $\mathrm{BaSO_{4}}$ in $\mathrm{mol\,L^{-1}}$ and in $\mathrm{mg\,L^{-1}}$ ($M=233.4\ \mathrm{g\,mol^{-1}}$), and $K_{sp}$. (b) Very carefully purified water has $\kappa=5.5\times10^{-8}\ \mathrm{S\,cm^{-1}}$ at $298\ \mathrm{K}$. Find $[\mathrm{H^{+}}]$ and $K_{w}$.
Find $K_{sp}$ of barium sulphate (a) first:
(a) κ $\kappa(\mathrm{BaSO_{4}})=4.22\times10^{-6}-1.20\times10^{-6}=3.02\times10^{-6}\ \mathrm{S\,cm^{-1}}$.
(a) Λ° Per mole of $\mathrm{BaSO_{4}}$: $127.2+160.0=287.2\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
(a) S $S=\dfrac{1000\times3.02\times10^{-6}}{287.2}=1.05\times10^{-5}\ \mathrm{mol\,L^{-1}}$, i.e. $2.45\ \mathrm{mg\,L^{-1}}$. $K_{sp}=S^{2}=1.11\times10^{-10}$.
(b) Water: $\Lambda_m^{\circ}=349.6+199.1=548.7\ \mathrm{S\,cm^{2}\,mol^{-1}}$; $[\mathrm{H^{+}}]=[\mathrm{OH^{-}}]=\dfrac{1000\times5.5\times10^{-8}}{548.7}=1.0\times10^{-7}\ \mathrm{mol\,L^{-1}}$, so $K_w=1.0\times10^{-14}$.
Trap Using a "per half mole" value such as $63.6$ for $\tfrac12\mathrm{Ba^{2+}}$ with the full-mole concentration would halve $\Lambda_m^{\circ}$ and double $S$. Keep $\lambda^{\circ}$ and $c$ on the same "per mole of formula unit" basis.

In the Kohlrausch workbench choose $\mathrm{NH_{4}OH}$. Which value of $\Lambda_m^{\circ}(\mathrm{NH_{4}OH})$ will the bar arithmetic produce, and what happens to $K_b$ as you dilute the solution?

The bars add $\mathrm{NH_{4}Cl}$ ($149.8$) and $\mathrm{NaOH}$ ($249.2$) and subtract $\mathrm{NaCl}$ ($126.4$): the $\mathrm{Na^{+}}$ and $\mathrm{Cl^{-}}$ segments cancel and $\Lambda_m^{\circ}=272.6\ \mathrm{S\,cm^{2}\,mol^{-1}}$ is left. At $c=0.0100\ \mathrm{mol\,L^{-1}}$ (slider $\log c=-2.0$) the readouts show $\Lambda_m=11.3$, $\alpha=0.0415$ and $K_b=1.80\times10^{-5}$. At $\log c=-4.0$, $\alpha$ rises to $0.3437$ but $K_b$ is still $1.80\times10^{-5}$: the dissociation constant is a true constant, and only the extent of dissociation changes with dilution (Ostwald's dilution law).
Interactive 2 — Kohlrausch Workbench: from Strong Electrolytes to $K_a$

Choose a weak electrolyte. The top panel builds its $\Lambda_m^{\circ}$ from three strong electrolytes: each bar is split into its cation (left) and anion (right) segments, and the subtracted salt (hatched) cancels the unwanted ions. The lower panel shows the molar conductivity measured at the chosen concentration as a fraction of $\Lambda_m^{\circ}$ — that fraction is $\alpha$ — and the dissociation constant computed from it. Press Play to sweep the concentration and watch $\alpha$ change while $K$ stays put.

0.0100 M
Λ°m (Kohlrausch)—
Λm at this c—
α = Λm / Λ°m—
K = cα² / (1 − α)—
⚠️ JEE Main traps

1. The factor 1000. $\Lambda_m=1000\kappa/c$ needs $\kappa$ in $\mathrm{S\,cm^{-1}}$ and $c$ in $\mathrm{mol\,L^{-1}}$ and gives $\mathrm{S\,cm^{2}\,mol^{-1}}$. If $\kappa$ is given in $\mathrm{S\,m^{-1}}$, convert first ($\div100$), or work fully in SI with $c$ in $\mathrm{mol\,m^{-3}}$.

2. Cell constant upside down. $G^{*}=l/A$ (unit $\mathrm{cm^{-1}}$), and $\kappa=G^{*}/R$ — not $R/G^{*}$. A larger resistance in the same cell means a smaller conductivity.

3. Opposite trends on dilution. $\kappa$ decreases, $\Lambda_m$ increases — for strong and weak electrolytes alike.

4. Extrapolating a weak electrolyte. $\Lambda_m^{\circ}$ of $\mathrm{CH_{3}COOH}$ or $\mathrm{NH_{4}OH}$ cannot be read from a $\Lambda_m$–$\sqrt c$ graph; use Kohlrausch's law. And $\alpha=\Lambda_m/\Lambda_m^{\circ}$ is for weak electrolytes only.

5. Sparingly soluble salts. Subtract $\kappa(\text{water})$, use $\Lambda_m^{\circ}$ (not a measured $\Lambda_m$) and keep $\lambda^{\circ}$ for doubly charged ions on the same per-mole basis as $S$.

At a certain concentration a weak monobasic acid has $\Lambda_m=39\ \mathrm{S\,cm^{2}\,mol^{-1}}$, and $\Lambda_m^{\circ}=390\ \mathrm{S\,cm^{2}\,mol^{-1}}$. Its degree of dissociation is

Exercises

All data at $298\ \mathrm{K}$. Use the $\lambda^{\circ}$ table of the third subsection where values are not given.

I
Conduction, conductivity and the cell constant.
  • 1 Express $\kappa=0.0129\ \mathrm{S\,cm^{-1}}$ in $\mathrm{S\,m^{-1}}$.
  • 2 A cell has electrodes of area $1.20\ \mathrm{cm^{2}}$ that are $0.84\ \mathrm{cm}$ apart. Filled with a solution, its resistance is $350\ \Omega$. Find the cell constant and the conductivity of the solution.
  • 3 A cell filled with $0.0100\ \mathrm{mol\,L^{-1}}$ KCl ($\kappa=1.41\times10^{-3}\ \mathrm{S\,cm^{-1}}$) has $R=1000\ \Omega$. Find the cell constant. Filled with solution Y it has $R=2820\ \Omega$; find $\kappa$ of Y.
  • 4 Explain why the resistance of a metal wire increases on heating while that of an electrolyte solution decreases.
  • 5 Why is an alternating current, and not a direct current, used to measure the resistance of an electrolyte solution? Why are the electrodes platinised?
  • 6 Find the resistivity of a solution whose conductivity is $0.025\ \mathrm{S\,cm^{-1}}$.
  • 7 A column of solution $5.0\ \mathrm{cm}$ long with cross-section $0.50\ \mathrm{cm^{2}}$ has $\kappa=4.0\times10^{-3}\ \mathrm{S\,cm^{-1}}$. Find its conductance and resistance.
  • 8 The same solution is moved to a cell whose electrodes are twice as far apart and half the area. By what factor does the measured resistance change? Does $\kappa$ change?
1 $1\ \mathrm{cm^{-1}}=100\ \mathrm{m^{-1}}$: $\kappa=1.29\ \mathrm{S\,m^{-1}}$.
2 $G^{*}=\dfrac{0.84}{1.20}=0.70\ \mathrm{cm^{-1}}$; $\kappa=\dfrac{0.70}{350}=2.0\times10^{-3}\ \mathrm{S\,cm^{-1}}$.
3 $G^{*}=1.41\times10^{-3}\times1000=1.41\ \mathrm{cm^{-1}}$; $\kappa(\mathrm{Y})=\dfrac{1.41}{2820}=5.0\times10^{-4}\ \mathrm{S\,cm^{-1}}$.
4 In a metal the carriers are electrons, and hotter lattice ions vibrate more and scatter them more. In a solution the carriers are ions; heating lowers the viscosity of the water and loosens solvation, so ions move faster (and weak electrolytes dissociate more).
5 DC would electrolyse the solution, changing its concentration and producing gas at the electrodes (polarisation), which adds a spurious resistance; with AC (about 1 kHz) the tiny changes reverse every half-cycle. Platinising gives a large rough surface that further reduces polarisation.
6 $\rho=\dfrac1\kappa=40\ \Omega\,\mathrm{cm}$ ($0.40\ \Omega\,\mathrm{m}$).
7 $G=\kappa\dfrac{A}{l}=4.0\times10^{-3}\times\dfrac{0.50}{5.0}=4.0\times10^{-4}\ \mathrm{S}$; $R=2500\ \Omega$.
8 $G^{*}=l/A$ becomes $\dfrac{2l}{A/2}=4\,\dfrac lA$, so $R=G^{*}/\kappa$ is four times larger. $\kappa$ is a property of the solution and does not change.
II
Molar conductivity and concentration.
  • 1 A $0.050\ \mathrm{mol\,L^{-1}}$ solution has $\kappa=5.50\times10^{-3}\ \mathrm{S\,cm^{-1}}$. Find $\Lambda_m$ in $\mathrm{S\,cm^{2}\,mol^{-1}}$.
  • 2 Express the answer to part 1 in $\mathrm{S\,m^{2}\,mol^{-1}}$.
  • 3 For KCl, $\Lambda_m^{\circ}=149.8\ \mathrm{S\,cm^{2}\,mol^{-1}}$ and $A=94.5$ (in the same units, $c$ in $\mathrm{mol\,L^{-1}}$). Find $\Lambda_m$ and $\kappa$ of $0.0020\ \mathrm{mol\,L^{-1}}$ KCl.
  • 4 A 1:1 strong electrolyte has $\Lambda_m=122.0$ at $0.0025\ \mathrm{mol\,L^{-1}}$ and $117.6\ \mathrm{S\,cm^{2}\,mol^{-1}}$ at $0.0100\ \mathrm{mol\,L^{-1}}$. Find $A$ and $\Lambda_m^{\circ}$.
  • 5 Explain why $\Lambda_m^{\circ}$ of ethanoic acid cannot be found by extrapolating a graph of $\Lambda_m$ against $\sqrt c$.
  • 6 Using the data of part 3, find the ratio $\kappa(0.010\ \mathrm{M})/\kappa(0.0010\ \mathrm{M})$ for KCl. Why is it less than 10?
  • 7 Arrange $\mathrm{Li^{+}}$, $\mathrm{Na^{+}}$ and $\mathrm{K^{+}}$ in increasing order of $\lambda^{\circ}$ in water, and explain.
  • 8 Sketch, on one set of axes, $\Lambda_m$ against $\sqrt c$ for KCl and for $\mathrm{CH_{3}COOH}$, and name the cause of the rise on dilution in each case.
1 $\Lambda_m=\dfrac{1000\times5.50\times10^{-3}}{0.050}=110\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
2 $110\times10^{-4}=1.10\times10^{-2}\ \mathrm{S\,m^{2}\,mol^{-1}}$.
3 $\sqrt{0.0020}=0.0447$: $\Lambda_m=149.8-94.5\times0.0447=145.6\ \mathrm{S\,cm^{2}\,mol^{-1}}$; $\kappa=\dfrac{145.6\times0.0020}{1000}=2.91\times10^{-4}\ \mathrm{S\,cm^{-1}}$.
4 $\sqrt c=0.050$ and $0.100$: $A=\dfrac{122.0-117.6}{0.100-0.050}=88$; $\Lambda_m^{\circ}=122.0+88\times0.050=126.4\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
5 Its $\alpha$ keeps increasing steeply as $c\to0$, so $\Lambda_m$ rises along a steep curve, not a line; the limit lies at concentrations too low to measure reliably, and no straight line can be drawn to it.
6 $\Lambda_m(0.010)=149.8-9.45=140.35$; $\Lambda_m(0.0010)=149.8-2.99=146.8$. Ratio $=\dfrac{140.35\times0.010}{146.8\times0.0010}=9.56$. Less than 10 because each mole conducts better in the more dilute solution.
7 $\mathrm{Li^{+}}\ (38.7)\lt\mathrm{Na^{+}}\ (50.1)\lt\mathrm{K^{+}}\ (73.5)$. The smallest ion has the highest charge density and the largest hydration shell, so its hydrated form is the bulkiest and slowest.
8 KCl: high, nearly straight line falling gently with $\sqrt c$ (intercept 149.8) — the rise on dilution is due to weaker interionic attraction. $\mathrm{CH_{3}COOH}$: low curve that shoots up near $\sqrt c=0$ towards 390.5 — the rise is due to increasing degree of dissociation.
III
Kohlrausch's law.
  • 1 Find $\Lambda_m^{\circ}(\mathrm{BaCl_{2}})$.
  • 2 Find $\Lambda_m^{\circ}(\mathrm{K_{2}SO_{4}})$.
  • 3 Find $\Lambda_m^{\circ}(\mathrm{HCOOH})$ from $\Lambda_m^{\circ}(\mathrm{HCOONa})=104.7$, $\Lambda_m^{\circ}(\mathrm{HCl})=425.9$ and $\Lambda_m^{\circ}(\mathrm{NaCl})=126.4\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
  • 4 $\Lambda_m^{\circ}(\mathrm{KCl})=149.8\ \mathrm{S\,cm^{2}\,mol^{-1}}$ and $\lambda^{\circ}(\mathrm{K^{+}})=73.5$. Find $\lambda^{\circ}(\mathrm{Cl^{-}})$, and then $\lambda^{\circ}(\mathrm{Na^{+}})$ from $\Lambda_m^{\circ}(\mathrm{NaCl})=126.4$.
  • 5 Find $\Lambda_m^{\circ}(\mathrm{AgCl})$ from $\Lambda_m^{\circ}(\mathrm{AgNO_{3}})=133.3$, $\Lambda_m^{\circ}(\mathrm{KCl})=149.8$ and $\Lambda_m^{\circ}(\mathrm{KNO_{3}})=144.9\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
  • 6 Find $\Lambda_m^{\circ}(\mathrm{NH_{4}OH})$ from $\Lambda_m^{\circ}(\mathrm{Ba(OH)_{2}})=525.4$, $\Lambda_m^{\circ}(\mathrm{BaCl_{2}})=279.8$ and $\Lambda_m^{\circ}(\mathrm{NH_{4}Cl})=149.8\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
  • 7 Explain why $\lambda^{\circ}(\mathrm{H^{+}})$ is about seven times $\lambda^{\circ}(\mathrm{Na^{+}})$.
  • 8 Find $\Lambda_m^{\circ}(\mathrm{CaSO_{4}})$.
1 $127.2+2(76.3)=279.8\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
2 $2(73.5)+160.0=307.0\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
3 $104.7+425.9-126.4=404.2\ \mathrm{S\,cm^{2}\,mol^{-1}}$ ($=349.6+54.6$ ✓).
4 $\lambda^{\circ}(\mathrm{Cl^{-}})=149.8-73.5=76.3$; $\lambda^{\circ}(\mathrm{Na^{+}})=126.4-76.3=50.1\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
5 $133.3+149.8-144.9=138.2\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
6 $\tfrac12\Lambda_m^{\circ}(\mathrm{Ba(OH)_{2}})$ supplies $\tfrac12\mathrm{Ba^{2+}}+\mathrm{OH^{-}}$; subtracting $\tfrac12\Lambda_m^{\circ}(\mathrm{BaCl_{2}})$ removes $\tfrac12\mathrm{Ba^{2+}}$ and adds $-\mathrm{Cl^{-}}$, which $\mathrm{NH_{4}Cl}$ restores: $262.7-139.9+149.8=272.6\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
7 $\mathrm{H^{+}}$ (as $\mathrm{H_{3}O^{+}}$) moves by proton hopping along the hydrogen-bonded chain of water molecules (Grotthuss mechanism): only a proton shifts a short distance at each step, so charge is relayed far faster than an ion can push through the solvent.
8 $119.0+160.0=279.0\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
IV
Degree of dissociation, $K_a$ and solubility.
  • 1 $0.050\ \mathrm{mol\,L^{-1}}$ ethanoic acid has $\Lambda_m=7.40\ \mathrm{S\,cm^{2}\,mol^{-1}}$ ($\Lambda_m^{\circ}=390.5$). Find $\alpha$.
  • 2 Find $K_a$ for the acid in part 1.
  • 3 $0.020\ \mathrm{mol\,L^{-1}}$ $\mathrm{NH_{4}OH}$ has $\kappa=1.63\times10^{-4}\ \mathrm{S\,cm^{-1}}$. Using $\Lambda_m^{\circ}=272.6\ \mathrm{S\,cm^{2}\,mol^{-1}}$, find $\alpha$ and $K_b$.
  • 4 A saturated solution of AgBr has $\kappa=1.698\times10^{-6}\ \mathrm{S\,cm^{-1}}$; the water used has $1.600\times10^{-6}\ \mathrm{S\,cm^{-1}}$. Find the solubility and $K_{sp}$ of AgBr.
  • 5 Pure water has $\kappa=5.5\times10^{-8}\ \mathrm{S\,cm^{-1}}$. Find $[\mathrm{H^{+}}]$ and $K_w$.
  • 6 Taking $K_a=1.83\times10^{-5}$ and the approximation $\alpha\approx\sqrt{K_a/c}$, estimate $\alpha$ of ethanoic acid at $0.0050\ \mathrm{mol\,L^{-1}}$. Compare with part 1.
  • 7 Estimate the conductivity of a solution that is $0.0010\ \mathrm{mol\,L^{-1}}$ in NaCl and $0.0010\ \mathrm{mol\,L^{-1}}$ in HCl, using limiting values ($\kappa=\sum c_i\Lambda_{m,i}^{\circ}/1000$).
  • 8 NaOH solution is added gradually to dilute HCl. Using $\lambda^{\circ}$ values, explain why the conductivity first falls and then rises.
1 $\alpha=\dfrac{7.40}{390.5}=0.0190$.
2 $K_a=\dfrac{0.050\times(0.01895)^{2}}{1-0.01895}=1.83\times10^{-5}$.
3 $\Lambda_m=\dfrac{1000\times1.63\times10^{-4}}{0.020}=8.15$; $\alpha=\dfrac{8.15}{272.6}=0.0299$; $K_b=\dfrac{0.020\times(0.0299)^{2}}{0.970}=1.84\times10^{-5}$.
4 $\kappa(\mathrm{AgBr})=9.8\times10^{-8}\ \mathrm{S\,cm^{-1}}$; $\Lambda_m^{\circ}=61.9+78.1=140.0$; $S=\dfrac{1000\times9.8\times10^{-8}}{140.0}=7.0\times10^{-7}\ \mathrm{mol\,L^{-1}}$; $K_{sp}=S^{2}=4.9\times10^{-13}$. Here the water conducts sixteen times more than the dissolved salt — the subtraction is essential.
5 $[\mathrm{H^{+}}]=\dfrac{1000\times5.5\times10^{-8}}{548.7}=1.0\times10^{-7}\ \mathrm{mol\,L^{-1}}$; $K_w=1.0\times10^{-14}$.
6 $\alpha\approx\sqrt{1.83\times10^{-5}/0.0050}=0.060$ — about three times the value at $0.050\ \mathrm{mol\,L^{-1}}$: ten-fold dilution multiplies $\alpha$ by about $\sqrt{10}$.
7 $\kappa=\dfrac{0.0010(126.4)+0.0010(425.9)}{1000}=5.52\times10^{-4}\ \mathrm{S\,cm^{-1}}$ (each ion contributes independently).
8 Before neutralisation is complete, each $\mathrm{OH^{-}}$ added removes one $\mathrm{H^{+}}$ ($\lambda^{\circ}=349.6$) as water and brings one $\mathrm{Na^{+}}$ ($50.1$): conductivity falls. After the equivalence point, extra $\mathrm{Na^{+}}$ and $\mathrm{OH^{-}}$ ($199.1$) simply accumulate: it rises. The minimum marks the equivalence point.
🎯 Exam corner JEE Main · MCQJEE Main · Numerical

E1. JEE Main · MCQ The conductivity of a $0.020\ \mathrm{mol\,L^{-1}}$ solution of an electrolyte is $2.4\times10^{-3}\ \mathrm{S\,cm^{-1}}$. Its molar conductivity is (A) $1.2\times10^{-4}\ \mathrm{S\,cm^{2}\,mol^{-1}}$ (B) $0.12\ \mathrm{S\,cm^{2}\,mol^{-1}}$ (C) $120\ \mathrm{S\,cm^{2}\,mol^{-1}}$ (D) $1.2\ \mathrm{S\,m^{2}\,mol^{-1}}$

Formula $\Lambda_m=\dfrac{1000\kappa}{c}=\dfrac{1000\times2.4\times10^{-3}}{0.020}=120\ \mathrm{S\,cm^{2}\,mol^{-1}}$.
Distractors (B) forgets the 1000; (D) divides by $100$ instead of $10^{4}$ — the correct SI value is $1.2\times10^{-2}\ \mathrm{S\,m^{2}\,mol^{-1}}$.
Answer (C).

E2. JEE Main · Numerical At $298\ \mathrm{K}$ the limiting molar conductivities of HCl, NaCl and $\mathrm{CH_{3}COONa}$ are $426$, $126$ and $91\ \mathrm{S\,cm^{2}\,mol^{-1}}$ respectively. Find $\Lambda_m^{\circ}$ of ethanoic acid in $\mathrm{S\,cm^{2}\,mol^{-1}}$. Give the answer to the nearest integer.

Kohlrausch $\Lambda_m^{\circ}(\mathrm{CH_{3}COOH})=\Lambda_m^{\circ}(\mathrm{CH_{3}COONa})+\Lambda_m^{\circ}(\mathrm{HCl})-\Lambda_m^{\circ}(\mathrm{NaCl})=91+426-126$.
Answer $391$.
⏱ Shortcut The salt that contains both "spare" ions ($\mathrm{Na^{+}}$, $\mathrm{Cl^{-}}$) is the one subtracted.

E3. JEE Main · MCQ On diluting an aqueous solution of a weak electrolyte, (A) its conductivity decreases and its molar conductivity increases (B) both conductivity and molar conductivity decrease (C) its conductivity increases and its molar conductivity decreases (D) both increase, because the degree of dissociation increases

Idea $\alpha$ rises, so $\Lambda_m=\alpha\Lambda_m^{\circ}$ rises. But the number of ions per cm³, $c\alpha$, still falls (e.g. $0.0100\to0.0001\ \mathrm{M}$ ethanoic acid: $c\alpha$ falls from $4.2\times10^{-4}$ to $3.4\times10^{-5}$), so $\kappa$ falls.
Answer (A).

E4. JEE Main · Numerical The resistance of a $0.0010\ \mathrm{mol\,L^{-1}}$ solution of a weak monobasic acid in a conductivity cell of cell constant $0.39\ \mathrm{cm^{-1}}$ is $10\,000\ \Omega$. If $\Lambda_m^{\circ}$ of the acid is $390\ \mathrm{S\,cm^{2}\,mol^{-1}}$, find its percentage degree of dissociation. Give the answer to the nearest integer.

κ $\kappa=\dfrac{G^{*}}{R}=\dfrac{0.39}{10\,000}=3.9\times10^{-5}\ \mathrm{S\,cm^{-1}}$.
Λm $\Lambda_m=\dfrac{1000\times3.9\times10^{-5}}{0.0010}=39\ \mathrm{S\,cm^{2}\,mol^{-1}}$; $\alpha=\dfrac{39}{390}=0.10$.
Answer $10$ (per cent).
⏱ Shortcut $\alpha=\dfrac{1000\,G^{*}}{R\,c\,\Lambda_m^{\circ}}$ in one line.

E5. JEE Main · MCQ The conductivity of a saturated solution of AgCl, after subtracting that of the water, is $1.38\times10^{-6}\ \mathrm{S\,cm^{-1}}$, and $\Lambda_m^{\circ}(\mathrm{AgCl})=138\ \mathrm{S\,cm^{2}\,mol^{-1}}$. The solubility product of AgCl is (A) $1.0\times10^{-5}$ (B) $1.0\times10^{-8}$ (C) $1.9\times10^{-12}$ (D) $1.0\times10^{-10}$

S $S=\dfrac{1000\times1.38\times10^{-6}}{138}=1.0\times10^{-5}\ \mathrm{mol\,L^{-1}}$.
Ksp $K_{sp}=S^{2}=1.0\times10^{-10}$.
Answer (D).
⏱ Shortcut (A) is the solubility itself, not its square. Forgetting the factor 1000 would give $S=10^{-8}$ and $K_{sp}=10^{-16}$ — absurdly small for AgCl.

E6. JEE Main · Numerical At infinite dilution, $\Lambda_m^{\circ}$ values of $\mathrm{Ba(OH)_{2}}$, $\mathrm{BaCl_{2}}$ and $\mathrm{NH_{4}Cl}$ are $524$, $280$ and $150\ \mathrm{S\,cm^{2}\,mol^{-1}}$ respectively. Find $\Lambda_m^{\circ}$ of $\mathrm{NH_{4}OH}$ in $\mathrm{S\,cm^{2}\,mol^{-1}}$. Give the answer to the nearest integer.

Combine $\Lambda_m^{\circ}(\mathrm{NH_{4}OH})=\Lambda_m^{\circ}(\mathrm{NH_{4}Cl})+\tfrac12\Lambda_m^{\circ}(\mathrm{Ba(OH)_{2}})-\tfrac12\Lambda_m^{\circ}(\mathrm{BaCl_{2}})$.
Value $150+262-140=272$.
Answer $272$.
⏱ Shortcut Each barium salt carries two anions per $\mathrm{Ba^{2+}}$, so halve both before adding — forgetting the halves gives $150+524-280=394$.
🔬 Research–Teaching NexusResearch-tutored · optional, about 60 minutes

Research question. How well does a cheap "TDS meter" track the actual salt content of drinking water, and how much do bottled, tap, filtered (RO) and well waters differ?

Why it matters. Handheld "total dissolved solids" (TDS) meters sold for checking water purifiers do not weigh anything: they measure conductivity, correct it to $25\ ^{\circ}\mathrm{C}$ and multiply by a fixed factor (often about $0.5$–$0.7\ \mathrm{mg\,L^{-1}}$ per $\mu\mathrm{S\,cm^{-1}}$). That factor assumes a typical mix of ions. Water authorities worldwide use conductivity as a fast screen for salinity in rivers, groundwater and desalination plants, so knowing when the conversion holds is practically important.

What to do.

  1. Make standard NaCl solutions by mass: $50$, $100$, $200$, $400$ and $800\ \mathrm{mg\,L^{-1}}$ (dissolve $0.80\ \mathrm{g}$ in $1.00\ \mathrm{L}$ and dilute by halves).
  2. Read each with a TDS or EC meter at room temperature and plot the reading against the true concentration. Is it a straight line through the origin? Find the meter's conversion factor for NaCl.
  3. Convert the true concentrations to $\mathrm{mol\,L^{-1}}$ and the readings to $\kappa$ (if your meter shows EC), and compute $\Lambda_m=1000\kappa/c$. Does $\Lambda_m$ fall slightly with concentration, as $\Lambda_m^{\circ}-A\sqrt c$ predicts?
  4. Measure bottled water (compare with the ions on its label), tap water, water from an RO purifier and, if available, well water.
  5. Repeat one sample at $15$, $25$ and $40\ ^{\circ}\mathrm{C}$ with the meter's temperature compensation off (if it can be switched off) to see the effect of temperature.

Tools: A TDS or EC meter (inexpensive pen type), kitchen scale reading to $0.01\ \mathrm{g}$ or a laboratory balance, measuring cylinder, table salt, distilled water, thermometer.

Hand in: The calibration graph, the derived $\Lambda_m$ values compared with $\Lambda_m^{\circ}(\mathrm{NaCl})=126.4\ \mathrm{S\,cm^{2}\,mol^{-1}}$, a table of the real water samples, and a paragraph on whether the meter's "TDS" can be trusted for water whose main ions are calcium and bicarbonate rather than sodium and chloride.

Going further. Use Kohlrausch's law and the ion concentrations on a bottled-water label to predict its conductivity, and compare with your reading.

Instructor note: pen meters are usually linear to within a few per cent over this range; the derived $\Lambda_m$ of NaCl comes out around $115$–$125\ \mathrm{S\,cm^{2}\,mol^{-1}}$, a little below $\Lambda_m^{\circ}$ as expected. RO water typically reads $10$–$50\ \mathrm{mg\,L^{-1}}$ and tap water a few hundred. The label-based prediction tends to overestimate slightly because real concentrations are not at infinite dilution.

🧪 Self-check quiz

0/5 correct

Q1. The SI unit of conductivity $\kappa$ is

Q2. The cell constant of a conductivity cell

Q3. Which of these has the largest limiting molar conductivity in water?

Q4. $\Lambda_m^{\circ}$ of ethanoic acid is best obtained

Q5. For a strong electrolyte, the Debye–Hückel–Onsager equation predicts that a plot of $\Lambda_m$ against $\sqrt c$ is